FCC ID: 2ADTD-D0115021 Wireless PIR Detector

FCC Information Please take attention that changes or modication not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation 1 2 3 4 5 2 3 II DS-PDP15P-EG2-WB Wireless PIR Detector User Manual 1 2 2. Bracket Tamper Port 3. Battery 3. Battery APPEARANCE E N G L I S H 1 1. Indicator 4. Tamper Switch 5. Power Switch 2 ENROLLMENT 3 INSTALLATION I. Check signal strength. II. Install the device. a. Mount the detector with screw. b. Mount the detector with sponge tape. III. (Optional)Install the device with bracket. TEST 4 User Manual Scan the QR code for more information and operation help. Specification 3 Detection range Auto sensitivity Pet immunity Tamper protection LED indicator Operating temperature Storage temperature Operating humidity Installation height Dimension (W H D) Weight Transmission frequency RF range 3 Battery Standard battery life Low Voltage Value 15m85.9 Yes Up to 30Kg (Height40cm) Front & Back Blue(alarm)

-10 C to 55 C (14 F to 131 F)

-10 C to 40 C (14 F to 104 F) Certied

-20 C to 60 C (-4 F to 140 F) 10% to 90%

1.8 to 2.4m 65.5mm 103mm 48.5mm 128g 433?.?1 MHz 1.6Km (open area) CR123A x 1 (included) 5 years 2.45 V 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to rmware updates or other reasons. Please nd the latest version of this Manual at the Hikvision website

(https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. 4 This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:

www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specic battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info BATTERY WARNING BATTERY CAUTION 1. Do not ingest battery, Chemical Burn Hazard 2. Keep new and used batteries away from the children. 3. If the battery compartment does not close securetyly, stop using the product and keep it away from children. 4. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. 1. Risk of re or explosion if the battery is replaced by an incorrect type. 2. Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types). 3. Do not dispose of the battery into re or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. 4. Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of ammable liquid or gas. 5. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of ammable liquid or gas. 6. Dispose of used batteries according to the instructions xxxx Device 1 I Signal Strength Test 15m 12m 10m 8m 6m 4m 2m 1m 2.4m User Manual 7 Times 4 III or ASPECTO 2. Puerto antimanipulacin del soporte E S P A O L 1 1. Piloto 3. Batera 4. Interruptor antimanipulacin 5. Interruptor de alimentacin 2 3 I. Comprobar la intensidad de la seal. II. Instalar el dispositivo. REGISTRO INSTALACIN a. Monte el sensor con tornillos. b. Monte el sensor con cinta adhesiva doble cara de espuma. PRUEBA III. Instalacin del dispositivo con soporte (opcional). 4 Manual de usuario Escanee el cdigo QR para obtener ms informacin y ayuda sobre el funcionamiento. Especificacin Alcance de deteccin Sensibilidad automtica Inmunidad a las mascotas Proteccin antimanipulacin Indicador led Temperatura de funcionamiento Temperatura de almacenamiento Humedad de funcionamiento Altura de instalacin Dimensiones Peso 15 m, 85,9 S Hasta 30 kg (altura < 40 cm) Anterior y posterior Azul (alarma)

-10 C a 55 C (14 F a 131 F)

-10 C a 40 C (14 F a 104 F), certicado

-20 C a 60 C (-4 F a 140 F) 10 % a 90 %

1,8 a 2,4 m 65,5 mm x 103 mm x 48,5 mm 128 g Frecuencia de transmisin Alcance de radiofrecuencia Batera Vida til de la batera convencional 433?.?1 MHz 1,6 km (rea abierta) 1 batera CR123A (incluida) 5 aos 3. Bateria APRESENTAO P O R T U G U S 1 1. Indicador 2. Porta antiviolao do suporte 4. Interruptor de violao 2 3 REGISTRO INSTALAO 5. Interruptor I. Verique a intensidade do sinal. II. Instale o dispositivo. a. Monte o detector com parafusos. b. Monte o detector com ta esponjosa. III. Instale o dispositivo com suporte (opcional). TESTE 4 Manual do usurio Leia o cdigo QR para mais informaes e ajuda na operao. Especificao Alcance de deteco Sensibilidade automtica Imunidade a pet Proteo antiviolao Indicador LED Temperatura de operao 15 m, 85,9 Sim At 30 kg (altura < 40 cm) Frontal e traseira Azul (alarme)

-10 C a 55 C (14 F a 131 F)

-10 C a 40 C (14 F a 104 F) certicada Temperatura de armazenamento Umidade de operao Altura de instalao Dimenses (L x A x P) Peso Frequncia de transmisso Faixa de RF Bateria Durao padro da bateria

-20 C a 60 C (-4 F a 140 F) 10% a 90%

1,8 m a 2,4 m 65,5 mm x 103 mm x 48,5 mm 128 g 433.1 MHz 1,6 km (espao aberto) 1 x CR123A (includa) 5 anos a. b.

(a) Detection Range 85.9 52 zones 4 planes 3min INSTALLATION CAUTION 1m 2m 4m 6m 8m 10m 12m 15m The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment and its associated mounting means shall remain secure during the installation. After the installation, the equipment, including any associated mounting plate, shall not be damaged. 1m 2m 4m 6m 8m 10m 12m 15m Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

HIKVISION Wireless PIR Detector Model: DS-PDP15P-EG2-WB IP: 3V === 50mA Max SN: A12345678 05/2020 UI AMT TINNY 0 UT &

Made in China FCC ID: 2ADTD-D0115021 433MHz This device complies with part 15 of _ the FCC Rules.Operation is subject to the following two conditions:

(1)This device may not cause harmful interference,and(2) this device must accept any interference received, including interference that may cause z 5 5

a) b) c) d) e) f) g) SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District Hangzhou 310052, China Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Xiuying Zhang 2ADTD 2ADTD-D0115021 zhangxiuying@hikvision.com

+86-571-88075998 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date:2020/6/23 Applicant Signature:

Print Name:

Title:

Xiuying Zhang Senior Certification engineer

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

Confidentiality Request regarding application for FCC ID: 2ADTD-D0115021 No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Hangzhou Hikvision Digital Technology Co., Ltd. To:

From: Hangzhou Hikvision Digital Technology Co., Ltd. Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code): Xiuying Zhang Title: Senior Certification engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Hangzhou Hikvision Digital Technology Co., Ltd. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 2020-6-23 Regarding: FCC ID: 2ADTD-D0115021 To whom it may concern:

We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Xiuying Zhang Title: Senior Certification engineer Signature:

On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +86-0571-88075998-62460