DS-PDTT15AM-LM-WA Wireless Tri-Tech AM Detector Quick Start Guide 1 74.2 mm 4 5 6 7 1 2 2 0 0
. 7 m m xxxx Device 3 2 3 13 E N G L I S H Diagram References Appearance 1 1. Indicator PIR Triggered: (top) Alarm:
Masked:
(bottom)
MW Triggered:
Fault:
2. Vertical Pole Mount 4. Top/Bottom Cover 6. PCBA 3. Screw Hole 5. Front Panel b. PIR Module (Bottom) d. Power Switch e. Microwave Module g. PIR Angle a. PIR Module (Top) c. Tamper Switch f. Antenna 7. Rear Panel 2 Enrollment I. Enrollment succeeded. Note: The front panel should be installed before powering on successfully. II. Check signal strength. 3 Installation 4 Detection Range I. Detection range 1. PIR Angle Settings 2. PIR Distance Settings II. Masking seal 5 User Manual Anti-Masking Alarm Scan the QR code for more information and operation help. Specification Detection Method Detection Range Detection Angle Detection Zones Detectable Speed Sensitivity White Light Filter Microwave Frequency Pet Immunity Anti-masking Adaptable Coverage Digital Processing Sealed Optics Tamper Protection Environment Temperature Indicator Signal Strength Indicator Anti-Sway Analytics Power Switch LED Indicator Transmission Technology Transmission Method Transmission Frequency Transmission Security Transmission Range(Free Space) Frequency Hopping Enrolling Method Standard Battery Life Power Supply Battery Model Typical Voltage Low Voltage Value Voltage Range Operation Temperature Storage Temperature Operation Humidity IP Rate Dimension(WxHxD) Weight Mounting Height Mounting Method Passive Infrared,Microwave 15 m 90 @ 180 adjustable 92 0.32 m/s Auto, Low 10000 lux 24 GHz(24~24.25 GHz) 45 Kg Support Support Pattern mask included Tri-Signal Logic Support Front,Rear Support Support Support Power Up Enrolling Green(Top PIR), Red(Microwave), Orange(Bottom PIR), Green+Orange(Mask), Blue(Alarm) Tri-X Wireless Two-Way RF Wireless 915 MHz AES-128 Encryption 1 Km Support Power up,Remote ID,QR Code 5 years in work status (being triggered 20 times per day) Battery Powered CR123A 5 3 V 2.450.1 V Fully charged(new) to 2.450.1V(battery)
-25 C to 60 C (-13 F to 140 F)
-25 C to 60 C (-13 F to 140 F) 10% to 90%
IP65 75 mm 202 mm 73 mm 600 g 0.8 to 1.2 m Wall Note: This product can only power the camera module
(DS-PDCM15PF-IR) as its accessory. OFF ON 14 Signal Strength Test 4 8 7 User Manual UD26055B I II 9 Hangzhou Hikvision Digital Technology CO., Ltd. No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China d e f g a b c 3 6 5 13 1 2 4 I 15m 1 1 15m 15m 15m 15m 2 15m II Masking Seal 3 top Masking Seal 3 1 2 3 4 5 6 7 8 9 1011 12 1314 151617 18 Masking Seal 3 bottom 2021 2223 2425 26 29 3031 3233 3435 Cut Reserve 38 39 40 43 44 45 Cut #9, #27, #41 Cut #10, #28, #42 Masking Seal 6 bottom ARMED
<1 min Cut #10, #12, #14, #16, #17,
#18, #34, #35, #36, #42, #43,
#44, #45, #46 Masking Seal 6 5 Masking Seal 6 top 1 2 3 4 5 6 7 8 9 1011 12 1314 151617 18 2021 2223 2425 26 29 3031 3233 3435 38 39 40 43 44 45
<3 min DISARMED WEAK INVERSE
<30 s STRONG INVERSE
Masking Seal 6 top 1 2 3 4 5 6 7 8 9 1011 12 1314 151617 18 Masking Seal 6 bottom Cut #10, #11, #12, #14, #16,
#18, #28, #29, #30, #42, #43,
#44, #45, #46 2021 2223 2425 26 29 3031 3233 3435 38 39 40 43 44 45 Masking Seal 1 bottom Masking Seal 4 bottom Masking Seal 7 Masking Seal 1 top Masking Seal 1 Masking Seal 4 top Masking Seal 4 1 2 3 4 5 6 7 8 9 1011 12 1314 151617 18 1 2 3 4 5 6 7 8 9 1011 12 1314 151617 18 2021 2223 2425 26 29 3031 3233 3435 2021 2223 2425 26 29 3031 3233 3435 38 39 40 43 44 45 Cut #1, #9, #19, #27, #37, #41 Cut #10, #18, #28 #36, #42, #46 38 39 40 43 44 45 Masking Seal 2 top Masking Seal 5 top Masking Seal 2 1 2 3 4 5 6 7 8 9 1011 12 1314 151617 18 1 2 3 4 5 6 7 8 9 1011 12 1314 151617 18 Cut #1, #2, #3, #5, #7, #9,
#19, #20, #21, #37, #38, #39,
#40, #41 Masking Seal 5 Masking Seal 2 bottom 2021 2223 2425 26 29 3031 3233 3435 Masking Seal 5 bottom 2021 2223 2425 26 29 3031 3233 3435 38 39 40 43 44 45 Cut #1, #19, #37 Cut #18, #36, #46 38 39 40 43 44 45 Cut #1, #3, #5, #7, #8, #9,
#25, #26, #27, #37, #38, #39,
#40, #41 E D C B A E D C B A Not Detected Detected Not Detected E D C B A E D C B A E D C B A E D C B A E D C B A E D C B A E D C B A English 2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation BATTERY CAUTION 1. Risk of explosion if the battery is replaced by an incorrect type. 2. Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in 3. Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which the case of some lithium battery types). may result in an explosion. 4. Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas. 5. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. 6. Dispose of used batteries according to the instructions.
+ identifies the positive terminal(s) of equipment which is used with, or generates direct current. -
identifies the negative terminal(s) of equipment which is used with, or generates direct current. No naked flame sources, such as lighted candles, should be placed on the equipment. INSTALLATION CAUTION 1. Install the equipment according to the instructions in this manual. 2. To prevent injury, this equipment must be securely attached to the floor/wall in accordance with the installation instructions.