all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User manual | Users Manual | 1.54 MiB | August 09 2016 / September 09 2016 | |||
1 2 | Cover Letter(s) | August 09 2016 / September 09 2016 | ||||||
1 2 | Attestation Statements | August 09 2016 / September 09 2016 | ||||||
1 2 | Attestation Statements | August 09 2016 / September 09 2016 | ||||||
1 2 | External Photos | August 09 2016 / September 09 2016 | ||||||
1 2 | Internal Photos | August 09 2016 / September 09 2016 | ||||||
1 2 | ID Label/Location Info | August 09 2016 / September 09 2016 | ||||||
1 2 | RF Exposure Info | September 09 2016 | ||||||
1 2 | Cover Letter(s) | August 09 2016 / September 09 2016 | ||||||
1 2 | Test Report | September 09 2016 | ||||||
1 2 | Test Setup Photos | September 09 2016 | ||||||
1 2 | Test Report | September 09 2016 |
1 2 | User manual | Users Manual | 1.54 MiB | August 09 2016 / September 09 2016 |
SAMSUNG SMARTCAM User Manual SNH-V6430BN/
SNH-V6430BNH Samsung SmartCam User Manual Copyright 2016
Co., Ltd. All rights reserved. Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization. Disclaimer
makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the users own responsibility. reserves the right to change the contents of this document without prior notice. For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION:
Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC NOTE:
The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. Operational Description The operational description shall fulfil the requirements of Rule Part 2.1033(b)(4). The rule part requires, "A brief description of the circuit functions of the device along with a statement describing how the device operates. This statement should contain a description of the ground system and antenna, if any, used with the device". The above requirement has been further interpreted by the FCC to mean that the description shall:
a. be an operational or technical description of how the device operates, is modulated and meets requirements;
b. describe the EUT completely. What is it (in plain English as well as technical terms)?
Give a clear, concise functional description of device operation. c. always describe the signal, such as modulation type, pulse repetition rate, signal type and information being sent. Describe all modulation types and all data rates.
When using the product for childrens care, be careful to keep the product out of
The product partially contains component which might cause respiration difficulty. childrens reach. Accessories and small parts of the product should be stored keeping out of childrens reach.
The product is not designed to replace responsibility of human supervision on children.
The product is not equipped with device of immediate notification to adult with accidental/sudden childrens move; it requires periodic checks and human supervision.
This appliance and its antenna must not be collocated or operation in conjunction with any other antenna or transmitter. A minimum separation distance of 20 cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements. deleted when it is mounted in the camera.
Please note that the content of a micro SD card used for other purposes may be Instructions & Warranty The manufacturer is not responsible for any loss or radio/TV interference caused by The manufacturer is not responsible for any loss or radio/TV interference caused by unauthorized modification of the product. unauthorized modification of the product. Such modification will void the warranty of the product as well as the users right of use. To comply with FCC RF exposurre compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operation in conjunction with any otheer antenna or transmitter. WARNING
The product must be assembled and installed by an adult.
Before using, read all instructions on this manual thoroughly and follow operational
To avoid entangled power cord, do not place it around the baby bed or other infant
Especially, the power cord should be installed carefully while keeping it out of childrens
Never use the product near bath tub, sink, washing machine and in wet basement to
The product is not designed for medical monitoring, and requires a grown-ups
To avoid overheating of the product, do not expose the product to direct sunlight; do not instructions, warnings on this manual and printed on the product. furniture. Keep this product and its power cord out of childrens reach. reach. avoid moisture. protective supervision on its use. install or use near a heat source such as heater, radiator, cooking devices (ex: electric stove or oven) and other warming devices (ex: audio amplifier, TV, etc.).
Make sure to keep ventilated while using the product. Avoid pillar or furniture that may block ventilation, when installing the product.
Make sure to use the power adaptor provided. If used with unidentified adaptor, it may damage the product. The power adaptor must be used with regular household electric supply.
Avoid sharp, pointed objects around the adaptors cable, not to damage the cable.
Be warned and never hold the cables stripped part when connecting / disconnecting
To avoid entangled cable lines, avoid using cable extension for adaptors power cord.
The products servicing is allowed only to authorized Hanwha Techwin service the adaptor to/from the wall outlet. personnel. Features (SNH-V6430BN) Features (SNH-V6430BNH) Whats Included (SNH-V6430BN) Whats Included (SNH-V6430BNH) Part names and functions (SNH-V6430BN) Part names and functions (SNH-V6430BNH) Contents GETTING STARTED 5 6 7 8 9 11 INSTALLATION & NETWORK CONNECTION 13 14 16 18 19 Indoor/Outdoor bracket switching Installation (SNH-V6430BN) Installation (SNH-V6430BNH) Network Connection and Settings (SNH-V6430BN) Network Connection and Settings (SNH-V6430BNH) MONITORING Registration 21 Live Video 26 Setup 29 Event Alarm 36 36 Playback 38 Information APPENDIX 39 44 Specifications Troubleshooting 01 GETTING STARTED 5 Features (SNH-V6430BN) 6 Features (SNH-V6430BNH) 7 Whats Included (SNH-V6430BN) 8 Whats Included (SNH-V6430BNH) 9 Part names and functions (SNH-V6430BN) 10 Power Supply 11 Part names and functions (SNH-V6430BNH) 12 Power Supply install the program without a separate installer program. Features (SNH-V6430BN)
Dedicated Wi-Fi Product
- The camera is registered through the Wi-Fi connection.
Easy to install
- The Wi-Fi Direct button allows easy connection to a wireless router.
- Simply visit the home page (www.samsungsmartcam.com) and download and
Remote monitoring
- Whenever and wherever if you are in the Internet enabled environment, remote
- PC, laptop or smart phone can be used for monitoring.
Real-time alarm
- When a motion and sound are detected, your smartphone will generate real time
Saving in SD card
- When an event occurs, the user can save the video in their SD card.
Downloading a recorded video
- You can download a motion detection triggered/audio detection triggered/
manually recorded video saved on the SD card to your PC or smartphone
(Android-powered smartphone). monitoring is ready for you.
Two-way Audio
- With the built-in speakers and microphone, you can make Two-way communications. However, it is available only with the smart phone. (Not applicable to the PC or laptop computer.)
Used for outdoor purposes
- You can easily install an indoor camera in an outdoor space using the housing for alarms. outdoor use. 01 G e t t i n g S t a r t e d 5 monitoring is ready for you. install the program without a separate installer program. Features (SNH-V6430BNH)
Easy to install
- The Wi-Fi Direct button allows easy connection to a wireless router.
- Simply visit the home page (www.samsungsmartcam.com) and download and
Remote monitoring
- Whenever and wherever if you are in the Internet enabled environment, remote
- PC, laptop or smart phone can be used for monitoring.
Real-time alarm
- When a motion and sound are detected, your smartphone will generate real time
Saving in SD card
- When an event occurs, the user can save the video in their SD card.
Downloading a recorded video
- You can download a motion detection triggered/audio detection triggered/
manually recorded video saved on the SD card to your PC or smartphone
(Android-powered smartphone).
Dustproof/Waterproof (weather resistant)
- The dustproof and waterproof design enables it to be installed in outdoor spaces that are exposed to dust and rain.
PoE connection
- You can easily connect the camera to the power supply and network using a PoE alarms. adapter, even in a demanding installation environment. 6 English Whats Included (SNH-V6430BN) Check for components when opening the product package. Camera Power adapter and cable Quick Start Guide Warranty Card GPL Lisence Tapping screw Plastic anchor n ` Keep the packing container. You will need the serial number later to register the camera. 01 G e t t i n g S t a r t e d 7 Whats Included (SNH-V6430BNH) Check for components when opening the product package. Camera PoE adapter & power plug LAN cable (10M) Quick Start Guide Warranty Card GPL Lisence Tapping screw Plastic anchor n ` Keep the packing container. You will need the serial number later to register the camera. 8 English Part names and functions (SNH-V6430BN) Luminance Sensor Detects light levels where the camera is placed. Night vision mode changes according to detection result. Camera lens Built-in IR LEDs for night vision Built-in microphone Power/Wi-Fi status LED Power Connection Button It connects with a power adapter.
01 G e t t i n g S t a r t e d Bracket knob Connect the camera and bracket. Wi-Fi Direct button Wi-Fi is used for wireless communication between camera and smartphone. Reset button Resets the camera settings to the default. The system restarts if you press the button for 10 seconds using a pointed object such as a needle. J ` If you press too strongly, the button can break. Speakers Generate audio output from your smart phone. Micro card insertion hole 9 LED status LED indicator shows operational status with colors. Refer to table below for detailed meaning of the LED indicator. Red Blinking Blue Blinking Color Red Blue Green Purple Yellow/Orange Status Booting up Booting completed / Establishing network connection Connecting to the network. Local connection established Connection to server completed / Normal operation Waiting to connect with a wireless router Updating firmware Power Supply Plug-in the camera power adapter to the wall outlet and connect the camera as shown. n ` Make sure to use the provided power adaptor. If you use an adaptor other than the power supply adaptor provided in our package, the product may not operate properly.
` It takes about 30 seconds to reboot the camera completely.
` When the camera is turned on, the LED blinks red. 10 English Part names and functions (SNH-V6430BNH) PoE connection port The camera is connected with the PoE adapter to connect with the power supply and the network. Angle adjustment hinge Wi-Fi Direct button Wi-Fi is used for wireless communication between camera and smartphone. Luminance Sensor Detects light levels where the camera is placed. Night vision mode changes according to detection result. Camera lens Built-in IR LEDs for night vision Built-in microphone Power/Network status LED 01 G e t t i n g S t a r t e d
Reset button Resets the camera settings to the default. The system restarts if you press the button for 10 seconds using a pointed object such as a needle. J ` If you press too strongly, the button can break. Micro card insertion hole 11 port of the router. 4. Connect the LAN cable from the PoE adapter [DATA IN] socket to the LAN n ` When connecting the camera wirelessly via Wi-Fi Direct, remove the LAN cable 5. Plug the PoE adapter into an electrical outlet. n ` Use the PoE adapter and power plug that have been included with the camera. Using connecting the PoE adapter and the router. an incompatible adapter may cause the camera to malfunction.
` It takes about 30 seconds to reboot the camera completely.
` When the camera is turned on, the LED blinks red. LED status LED indicator shows operational status with colors. Refer to table below for detailed meaning of the LED indicator. Red Blinking Blue Blinking Color Red Blue Green Purple Yellow/Orange Status Booting up Booting completed / Establishing network connection Connecting to the network. Local connection established Connection to server completed / Normal operation Waiting to connect with a wireless router Updating firmware Power Supply Using the PoE adapter 1. Push to insert the included PoE adapter in the power plug, as shown in the figure below. 2. To remove the power plug from the PoE adapter, press the [PUSH] section as shown in the figure below, and push up the power plug. 3. Connect the LAN cable from the PoE adapter [DATA & POWER OUT]
socket to the PoE socket.
<Router>
12 English 02 INSTALLATION &
NETWORK CONNECTION 13 Indoor/Outdoor bracket switching 13 Precautions 13 Separating the indoor bracket Installing the outdoor bracket 14 14 Installation
(SNH-V6430BN) 14 Precautions 14 Installing on the wall and ceiling using screws 15 Adjusting the camera angle 16 Installation
(SNH-V6430BNH) 18 Network Connection and Settings (SNH-V6430BN) 18 Precautions 18 Connection using the Wi-Fi Direct function 19 Network Connection and Settings (SNH-V6430BNH) 19 Precautions 19 Connecting via network cable 20 Connection using the Wi-Fi Direct function 16 Precautions 16 Installing on the wall and ceiling using screws 17 Adjusting the camera angle Indoor/Outdoor bracket switching Precautions 1. Outdoor bracket is available separately. Separating the indoor bracket 1. Turn the knob on the back of the camera in the
[LOOSEN] direction.
2. Remove the bracket from the main body of the camera, as shown in the figure below. Main body 02 I n s t a l l a t i o n
&
N e t w o r k C o n n e c t i o n
13 Installing the outdoor bracket 1. Install the outdoor bracket into the groove on the main body of the camera, as shown in the figure below. Main body 2. Turn the housing to the LOCK [
] direction. 14 English Installation (SNH-V6430BN) Precautions Install the camera in a location with a good Wi-Fi signal and no interference. 1. 2. Keep it away from humidity such as around the humidifier. 3. Keep it away from direct sunlight, strong light or dust; install it in a place with clear view. 4. Do not install it in a place where there are a lot of obstacles. 5. Keep the lens clean at all times. Wipe off the dust with a soft cloth. Installing on the wall and ceiling using screws 1. Remove the rubber packing attached to the camera stand. 2. Take out the screws (M3xL20) and anchors
(5x25mm). When installing on a wooden wall 3. Fix the bracket to the wall using screws, as shown in the next image. Using a Phillips screwdriver, fasten screws in 2 screw holes on the wall on which the camera is to be installed. When installing on a concrete wall 3. Fix the bracket on the wall using screws and anchors. First, mark the wall on which the camera is to be installed as shown in the figure. 4. On the mark, drill a hole to a depth of about 3cm in the wall using a drill bit and drill with a 5mm diameter for concrete. Remove any debris remaining in the hole after drilling. J ` Use caution when drilling to avoid injury. 5. Insert an anchor in each of the 2 holes for the screws, then hit the back of the anchor with a hammer or a rubber mallet until it is completely inserted. 6. Insert a screw in each of the 2 holes in the wall, and tighten the screws using a Phillips screwdriver. 7. Connect the adapter plug to the power terminal of the camera. 8. If the bracket hinge becomes loose, remove the rubber cover and tighten the screw using a screwdriver. Adjusting the camera angle 1. Place the camera stand on a flat surface. appropriate. 2. Adjust the cameras shooting angle as n ` If the bracket hinge becomes loose, remove the rubber cover and tighten the screw using a screwdriver, then adjust the direction of the camera. 15 02 I n s t a l l a t i o n
&
N e t w o r k C o n n e c t i o n Installation (SNH-V6430BNH) Precautions When installing on a concrete wall 2. Fix the bracket on the wall using screws and anchors. First, mark the wall on which the camera is to be installed as shown in the figure. 1. To facilitate monitoring, connect between the PoE adapter [DATA IN] port and the router. In a location with a good Wi-Fi signal and no interference, use Wi-Fi communication. 2. 3. As the front of the lens may become dirty due to rainwater, avoid installing under the eaves or in a moist space. 4. Keep it away from direct sunlight, strong light or dust; install it in a place with clear view. 5. Do not install it in a place where there are a lot of obstacles. 6. Keep the lens clean at all times. Wipe off the dust with a soft cloth. Installing on the wall and ceiling using screws 1. Take out the screws (M3xL20) and anchors (5x25mm). When installing on a wooden wall 2. Fix the bracket to the wall using screws, as shown in the next image. Using a Phillips screwdriver, fasten screws in 3 screw holes on the wall on which the camera is to be installed. 3. On the mark, drill a hole to a depth of about 3cm in the wall using a drill bit and drill with a 5mm diameter for concrete. Remove any debris remaining in the hole after drilling. J ` Use caution when drilling to avoid injury. 4. Insert an anchor in each of the 3 holes for the screws, then hit the back of the anchor with a hammer or a rubber mallet until it is completely inserted. 16 English 5. Insert a screw in each of the 3 holes in the wall, and tighten the screws using a Phillips screwdriver. 6. Connect the PoE adapter to the camera. J ` Insert the cable through the hole at the bottom of the bracket to prevent the cable from being pressed when installing the camera. Adjusting the camera angle 1. Turn the bracket knob counter-clockwise. 2. Adjust the angle adjustment hinge to set the desired camera angle. 3. Turn the bracket knob clockwise to fasten. Angle adjustment hinge Bracket knob 17 02 I n s t a l l a t i o n
&
N e t w o r k C o n n e c t i o n Connection using the Wi-Fi Direct function What is Wi-Fi Direct?
Using Wi-Fi Direct, you can easily connect your camera to a router without a cable. 1. When the power is connected, the power status LED lights up in red and starts blinking when boot-up is complete. 2. Press and hold the Wi-Fi Direct button on the camera for 5 seconds, and the color of the LED will change to yellow/orange. Wi-Fi Direct Button
<Wireless Router>
Mobile 3. Register and select a camera, referring to the instructions in the mobile guide. 4. When the camera connects the server, the LED turns green. 5. Set up the wireless network environment in accordance with the <Wireless n ` The camera can only be registered via mobile. Network> guidance on page. 31.
` You can connect in relay mode if the router doesn't have UPnP. Configuration may differ depending on the router model. Please refer to the router manual.
` Please contact the service provider if you have difficulty connecting to the Internet. environment. administrator or service provider. the service. If this is the case, contact the service provider. Network Connection and Settings
(SNH-V6430BN) Precautions
The wireless network access may fail, depending on the communications
For details about the network settings and password, contact your network
For a specific Internet service requiring user authentication, you may not access
Do not access the unauthorized network.
The farther the distance from the Wireless Access Point, the longer time the
If you fail to access the selected wireless network, try a different Wireless
For more information about the router or the wireless connection, refer to the
If the camera is connected to a multiple-Wireless Access Point network network connection may take. Access Point to make access. documentation of the router or contact the router manufacturer. environment, some video packets may be lost, depending on the network traffic load.
According to the network policy (blocking UDP) of the service provider, the video transmission can be limited to 7 minutes. For more details, refer to the descriptions on page 28, <Relay Mode>.
In addition to the above two situations, you may encounter a network delay or interruption due to the network conditions.
Some hubs can have compatibility issues. 18 English Network Connection and Settings
(SNH-V6430BNH) Precautions
The cable connecting the router to the camera should have a length of 70m or
The wireless network access may fail, depending on the communications less (based on CAT5e LAN cable) environment. In this case, a wired connection is recommended. administrator or service provider. the service. If this is the case, contact the service provider.
For details about the network settings and password, contact your network
For a specific Internet service requiring user authentication, you may not access
Do not access the unauthorized network.
The farther the distance from the Wireless Access Point, the longer time the
If you fail to access the selected wireless network, try a different Wireless
For more information about the router or the wireless connection, refer to the
If the camera is connected to a multiple-Wireless Access Point network network connection may take. Access Point to make access. documentation of the router or contact the router manufacturer. environment, some video packets may be lost, depending on the network traffic load.
According to the network policy (blocking UDP) of the service provider, the video transmission can be limited to 7 minutes. For more details, refer to the descriptions on page 28, <Relay Mode>.
In addition to the above two situations, you may encounter a network delay or interruption due to the network conditions.
Some hubs can have compatibility issues. Connecting via network cable If a wireless router is not available, connect a home router directly to the PoE adapter to which the camera is connected using a LAN cable. 1. Turn the power on and the LED will turn red. The red light will flicker when bootup is complete. 2. As shown in the figure below, LAN Internet Service
<Router>
3. When the camera is connected to the router, the LED turns blue.
(Connection standby time: 30 seconds maximum) If the LED does not turn blue, return to Step 2 and confirm that all steps were performed correctly. server. 4. The status LED will became steady green once the camera is connected to n ` It is recommended to set the router to DHCP(Dynamic Host Configuration Protocol) server. If you want to use static IP address, please refer to <Wired Network> on page 30.
` If the routers UPnP is not set, then you might be connected in relay mode. The settings may differ depending on the connected Broadband Router model. For more information, refer to the user manual of the applicable router. 19 02 I n s t a l l a t i o n
&
N e t w o r k C o n n e c t i o n Connection using the Wi-Fi Direct function What is Wi-Fi Direct?
Using Wi-Fi Direct, you can easily connect your camera to a router without a cable. 1. When the power is connected, the power status LED lights up in red and starts blinking when boot-up is complete. 2. Press and hold the Wi-Fi Direct button on the camera for 5 seconds, and the color of the LED will change to yellow/orange. Wi-Fi Direct Button
<Wireless Router>
Mobile 3. Register and select a camera, referring to the instructions in the mobile guide. 4. When the camera connects the server, the LED turns green. 5. Set up the wireless network environment in accordance with the <Wireless n ` The camera can only be registered via mobile. Network> guidance on page. 31.
` You can connect in relay mode if the router doesn't have UPnP. Configuration may differ depending on the router model. Please refer to the router manual.
` Please contact the service provider if you have difficulty connecting to the Internet. 20 English 03 36 Event Alarm 36 Playback 38 Information 38 My Account 38 Support MONITORING 21 Registration 21 Web browser requirements 21 Starting SmartCam 26 Live Video 27 Monitoring options 29 Setup 29 Basic Info 30 Network 32 Time 33 Alarm & Notification 34 Schedule 35 SD card Registration For the SNH-V6430BN model, camera registration can only be performed using a smartphone. For more information about camera registration, please see the mobile manual. For the SNH-V6430BNH model, camera registration can be performed not only from a smartphone through wired/wireless connection, but also though a PC or laptop computer. Web browser requirements 02 Windows Windows 7/8 or higher is supported
- Internet Explorer 9.0 or higher
(The 64-bit is not supported.)
- Firefox Mac Mac OSX or higher is supported
- Firefox
- Safari Starting SmartCam 1. From your PC, launch your web browser. 2. Go to http://www.samsungsmartcam.com. 3. Select preferred language. 4. Click <Sign up> or <Starting SmartCam>. 21 I n s t a l l a t i o n
&
N e t w o r k C o n n e c t i o n Plug in installation You can only see the camera image after installing a plug-in. n ` If you login or click <Starting SmartCam> in a PC where the plug in is not installed,
` When you install the plug in, the web browser will be terminated and you need to the installation message window will pop up. launch it again. 1) Click <Download Plug-in>, run the setup file. 3) Click <Install> to begin the installation. Installation has completed. 4) For Windows 2) Click <Next>. 22 English For Mac 2) Click <Continue>. 4) Enter MAC PC password and click <Install Software>. 3) Click <Install>. Installation has completed. 5) 03 M o n i t o r i n g 23 5. Enter the requested information, and click <Sign Up>. 6. According to the network connection and setting, click <Next> when the camera LED turns into green.
ID : Using alphabetical characters and numbers, make a combination using 8 to 14 letters.
Password : To strengthen security, create a password with a combination of special characters, numerals and English letters. J ` Length and other restrictions of password.
- A combination of English letters/numerals: 10 digits or more
- The password must not be identical to your ID.
- No simple repetitive pattern must be used. e.g., 1212abab, azxsazxs
- You cannot use 4 or more consecutive letters.
- You cannot use 4 or more consecutive qwerty keyboard letters. e.g., 1234, abcd e.g., asdf, 7890
- You cannot use any letter 4 consecutive times. e.g., !!!!, 1111, aaaa
Confirm Password : Please enter the password again for confirmation.
Name : Enter the user name.
E-mail : Please make sure you enter correct email address as you will have to use the email address to receive temporary ID/password when you lost your user ID or password. 24 English If the camera is not found, enter the serial number manually. 7. Select the serial number of the camera to be added from the camera search list. 8. Click <Next>. n ` Serial number can be found the label on the side of the packaging or on the rear of the
` The computer and the camera has to be on the same network router to auto detect product. the cameras. 9. Create <Camera Name> and <Camera password>. 10. Click <Next>. 12. Select your Wireless Network from the list. 13. Enter the password of your Wireless Network and click <Next>. n ` The camera password is used to block the unauthorized access to your camera.
` Create camera password using alphanumeric characters between 1 to 8 without any 11. After adding the camera, click <Yes> in the wireless network setup pop-up space. window. n ` If your Wireless Network is hidden, select <Other Wi-Fi Networks (not listed)>. 14. Click <OK>.
` Select <Display password> to display the password. 03 M o n i t o r i n g 25 15. Unplug the network cable from the camera and the router. 16. Click <Finish> if the <Finish> button is activated. Live Video 1. Select a camera from the camera list at the upper left hand of the screen. 17. Once the camera is successfully registered, you can check the camera in the camera list. n ` The gray icon indicates the camera is inactive so you cannot monitor it right now. 2. Enter the camera password and click <OK>. n ` Check on <Remember> to access your camera without entering the password next
` If you want to change the Camera password, please refer to <Basic Info> on page 29. time. 3. Live video will be displayed on the screen. 26 English Monitoring options a b c q p o n m d e f g h i j k l Item a Default Camera b Delete Camera c Cancel remembering camera password d LDC Description Set the default camera to monitor in the camera list. Delete the registered camera. Cancel remembering the camera password. To determine whether or not to use the image distortion correction. Item e Night Vision f WDR g Motion zone setting h Flip/Mirror i Network Speed j Manual recording k Capture Image l Sound Description If Night Vision is set <ON>, it will automatically switch to black and white mode in the dark condition and then the IR lamp will automatically operate. If Night Vision is set <OFF>, it does not switch to night vision mode and it will operate in color mode. Compensate the backlight by brightening any dark areas and darkening any bright areas. It detects motion within the range set by a user. You can flip/mirror the video image. Set the network speed (low/mid/high).
` If the bandwidth provided by your internet service provider is smaller than the recommended value, then the video might get fuzzy or temporary disconnections or delays in the live video may be caused. A user can directly save videos in their SD card.
` If there is an ongoing event now or overwrite to SD card is not checked, and there is storage space of 10% remaining, you cannot perform manual recording.
` If you move the page or turn off the browser without turning off the manual recording button, it will be saved for a max of 30 seconds and manual recording will be finished. Live video is saved as one image. When enabled, you can hear whats happening around the camera.
` Some internet service providers do not support audio outputs in relay mode. 03 M o n i t o r i n g 27 Item m Full screen n Brightness o Hide/unhide detailed Description Converts the current image to full screen size.
` The system supports Internet Explorer only.
` If you double-click the screen, the full screen mode is terminated. You can adjust the brightness of the screen image. p Audio menu
] icon to unhide or hide detailed setting menu. Click on the [
Adjust the volume of the built-in microphone and speaker of the camera as appropriate. If you set the mic setting to '0', you will not hear the live audio, and it will not be recorded in your SD card. Note that the Two-way audio transfer function is available only with the smart phone application.
` The SNH-V6430BNH model does not support a speaker or the Click the [
Wireless Network Speed
] icon to register an additional camera. interactive audio function. q Add a camera Recommended bandwidth 0.7Mbps 1.5Mbps 3.5Mbps Profile Name Low Speed Network Mid Speed Network High Speed Network Resolution VGA HD(720P) Full HD(1080P) Frame rate 10 fps 15 fps 30 fps 28 English n ` What is relay mode?
If the network condition is unstable, the camera cannot make a normal connection
(P2P), so it will set up a connection in relay mode. In this case, you will see the video for the first seven minutes only. Samsung server then retransmitted to the user's computer. com", go to support page, and refer to Troubleshooting on it.
` Relay mode is added feature where the video from the camera is transmitted to
` If you have trouble connection to the camera, visit "http://www.samsungsmartcam.
` It is recommended to use one browser at one time.
` The Night Vision video produces a different visibility according to the distance between
` The number of available concurrent users for a single camera may vary depending on camera and subject. the speed of your Wi-Fi router. Motion Zone Setting
> icon. 1) Click the <
2) Drag it to the screen to set the detection area. 3) Click on <OK>. n ` The <Motion Detection> function needs to be activated in order to use the motion If you want to delete the set area, click on <Delete All>. zone function.
` You can set up to 3 motion zones. Setup Basic Info a b c d e f g h Item a Serial number b Camera password c Camera Name d Firmware Version e Status LED f Flickerless g Image encrypting h Camera default Description You can confirm the serial number. Click the <Modify>, you can change the Camera password. Enter the current camera password, and type a new Camera password. Click the <Modify>, you can change the camera name. You can check the current version and the latest version of your camera S/W. You can turn on/off the LED in your camera.
` The LED will illuminate when the power supply is reconnected. You can reduce the occurrence of screen shaking due to the frequency mismatches with the neighboring lighting.
` If you use the flickerless function outdoors (in a bright environment), image saturation may occur. Encrypts the transmitted image.
` If Encrypt Image is activated, the image transmission performance Press the <Reset> button to initialize all camera settings other than the network settings.
` To reset the camera to its factory default settings, press the [RESET]
may be affected. button on the camera. n ` If you change the camera password, you will be logged out and return to the camera
` Keep the camera password in a safe place as it is used for viewing the live screen of password input page. the camera or for changing the display settings. 29 03 M o n i t o r i n g Firmware update If the currently used S/W is not of the latest version, update it. If you are using the latest version, then the firmware will not be activated. 1) Click <Firmware>. Network
<Wired Network>
2) Click the <
> icon to update the firmware. a b 3) When the firmware update is finished, the camera will reboot. n ` The duration of the firmware update depends on the size of the firmware file and the network connection speed.
` When executing the firmware update, the camera LED turns purple. J ` Please do not cut off the camera power or Internet connection during a firmware update. The system may be damaged. 30 English Item a Dynamic IP Address b Static IP Address Description If you select <Dynamic IP Address>, the IP address will be obtained automatically. You must manually provide the information of: IP address, subnet mask, gateway, DNS server address.
` Check the information of the router to connect. n ` SNH-V6430BNH supports wired network setup. network connection is prioritized.
` If any of the manual settings is wrong, the network settings will not be applied.
` If you have both cable and wireless network connections simultaneously, the cable
` If you switch from the current wireless connection to the cable connection, the network
` For more information about the router or the wireless connection, refer to the will switch to cable connection accordingly. documentation of the router or contact the router manufacturer.
<Wireless Network>
a b c d Item a Wireless On/
Wireless Off b AP (Access Point) list c AP (Access Point) password d Hidden SSID Description You can select to activate or deactivate the wireless network connection. You will see a list of APs (Access Point) available. Select a desired one from the list of APs (Access Point). You can access the network by entering the password set for the wireless router. For the password, contact your network administrator. Select a different WiFi network, entering its SSID, the type of security that it uses, and the wireless password configured in the router's settings. providing a specific password. n ` If you select a non-secured AP (Access Point), you just can access the network without
` If you cannot connect to the wireless network, check that you entered the wireless
` When the wireless network settings are completed, remove the LAN cable. If you do router password correctly. not remove the LAN cable, the wireless network will not be available. 03 M o n i t o r i n g 31 n ` The time will synchronize with the NTP(Network Time Protocol) server automatically. For this, Internet connection is required.
` You need to set the timezone correctly to obtain the exact time setting.
` The time displayed without Internet connection may not be accurate. Time a b c d fe Item a Time b Time Zone c Display Time d Automatic Time e Daylight Saving Time f Time to show 32 English Description Confirm the camera's time. Select your region. Select the time format displayed in time setting. It sets camera's time automatically. Check this option if you live in a country or region where DST(Daylight Saving Time) is applied. Live screen displays the time. Alarm & Notification Camera has ability to send event notifications when motion or audio is detected. a Item a Alarm notification Description You can set motion or audio alerts. Sensitivity level can also be set. The higher the sensitivity, the more accurate motion and audio events can be detected.
` When an event occurs, if you want to send alerts to Gmail, first log into your google account. n ` In the following case, it may fail to derive the proper results for basic events and motion detection.
- The object color or brightness is similar to the background.
- Multiple movements continue occurring at random due to a scene change or other reasons.
- A fixed object continues moving in the same position.
- An object hides other objects behind.
- Two or more objects overlap or one object divides in multiple portions.
- A moving object comes close to the camera.
<Gmail> Notification The event alarm is sent through Gmail. 1. Select the Google. 2. Enter your Gmail address and password. 3. Select <Use> of Send alarms. 4. Enter your email address to receive the notification e-mail and click <Add>. Now, the receiver full email address will be shown in the List Box. If you want to register more than one email address, you can just repeat the same procedure. 5. Click <Save>.
<Receiver email address>
n ` If your Google email ID/password are saved, only check Send alarms.
` If the email address for the recipient entered is incorrect, event alerts will not be sent.
` Even if you entered a correct google account ID, if the ID/password confirmation pop up window appears, click on <Go to the google page.> and check the google account. 03 M o n i t o r i n g 33 Push alarm Notification For users whose cameras are registered, a push alarm is provided via the Web app and the mobile app. Schedule When the user designates a desired day and time, the alarm works only at the designated time.
Push alert list shows the list of IDs of users who registered cameras. When an alarm occurs, the web site will send push alerts to each smart phone. a b c Item a Only Scheduled Time b Always c Motion time settings Description Alarm function will only operate for the time/day designated by the user. Alarm function always operates. You can click and drag to set the motion time in hours. Example) When you select 00, an event will occur and remain from 00 to 00:59 34 English SD card When an event occurs, it is saved in an SD card. Item d Overwrite e SD Card Status Description If the SD card capacity is insufficient, it will start overwriting the oldest data. ` When there is storage capacity of 10% remaining, the top notification window will show an alarm. Check the remaining capacity of your SD card and delete all the data. n ` Turn off the camera power or set it to <Off> before removing the micro SD card. If you fail to do this, the data in the micro SD camera may be damaged.
` Please note that the content of a micro SD card used for other purposes may be
` The following micro SD cards are recommended for this camera. deleted when it is mounted in the camera. Manufacturer : Sandisk, Transcend Class 6 or higher, MLC type
` Micro SD card of max 128GB is supported and a FAT32 file system is supported.
` It is recommended to use the micro SD card after formatting it. Regularly formatting the memory card will help extend its life. a b c d e Item Description If you set motion/audio, video will be automatically saved in your SD a Use the SD card card. b Continuous Recording Saves the video without being interrupted by events that may occur. c Recording resolution Sets the resolution of the image stored on the SD card. settings 03 M o n i t o r i n g 35 Event Alarm You can check the event alarm that occurred. Playback You can play a video saved on the SD card and download it to the PC. a Item a Delete by dates b Delete All c Display Events d Arrange by types Description Delete all the event alarms on the date. Delete all the event alarms for thirty days. Displays the number of events occurred in the 30 day list. Arrange the event list by event types. b c d a b c Item a Type b Date c Play/pause d Search d e f g Description Set the event type to search for during the search period. Set the search date for the data saved in your SD card. Play and pause video. Perform event searches. 36 English Item Description e Downloading a recorded video are connected to the same network router. Downloads a manually recorded video/motion/audio event saved on the SD card to the PC.
` Downloading is only available when the computer and the camera
` Downloading may be unavailable if the network is unstable or
` The function to download a recorded video is supported by the Smart Cam mobile app for Android smartphones (not supported in the iOS app). there is access by multiple users. f Refresh g Timeline Renew the events displayed in timeline. Use the timeline to play the video in the desired time. 03 M o n i t o r i n g 37 Information My Account Support You can download the Smart Cam mobile app and its user manual. n ` If you want to change the member information, click on <Account>. Select the item
(password, or email address) and enter your information. 38 English 04 APPENDIX 39 Specifications 39 Specifications 42 Product Appearance (SNH-V6430BN) 43 Product Appearance (SNH-V6430BNH) 44 Troubleshooting 5RGEKECVKQPU Specifications Item Video Imaging Device Effective Pixels Low Light Performance Lens Angular Field of View(H / V / D) Focus Control Lens Distortion Correction Operational IR LED Viewable Length Wide Dynamic Range Gain Control White Balance SNH-V6430BN Description SNH-V6430BNH 1/3" CMOS 1944(H) x 1092(V) Color : 0.3 Lux, B/W : 0 Lux with IR 113 / 63 / 130 Fixed Focus supported (camera level) 850nm 15m HDR Auto Auto 04 A p p e n d x i 39 Description SNH-V6430BNH Motion Detection, Audio Detection, Motion Zone Selection SNH-V6430BN 4x(mobile), 10x(Web) Off / On Supported Supported Motion Detection, Audio Detection, Motion Zone Selection, Sound Alert (police siren, alarm Siren, dog barking) Push alarm (PC and mobile terminal) Notification via email SDXC memory slot (up to 128GB) RJ-45
-
WiFi 802.11 a/b/g/n/ac, 2.4G/5G Dual-band H.264 1920x1080 / 1280x720 / 640x360 Multiple Streaming (Up to 4 Profiles) Built-in microphone/speaker G.711 u-law Interactive audio Half Duplex IPv4
-
Built-in microphone Item Digital Zoom Flip / Mirror Motion detection Audio detection Alarm trigger Event responsive motion Memory slot Network Ethernet Wireless Video Compression Format Resolution Streaming Capability Audio I/O Audio Compression Format Audio Communication IP 40 English Item Protocol Security Streaming Method Webviewer/App viewer Environmental Operating Temperature / Humidity Storage Temperature / Humidity Ingress Protection Electrical Input Voltage / Current Power Consumption Power Connector Description SNH-V6430BN SNH-V6430BNH TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTSP, NTP, HTTP, HTTPS, SSL, DHCP, SMTP, ICMP, ARP, DNS, UPnP HTTPS(SSL) authentication method Digest authentication method Unicast Supported OS
- PC : Windows 7, 8 or higher, MAC OS X or higher
- Mobile : iOS 7 or higher, Android Jelly Bean or higher (Not all Supported Browser
- Internet Explorer 9.0 or higher, Firefox 9.0 or higher, Safari 5.1 or higher Android phones are compatible).
-20C ~ +55C (-22F ~
+104F) / 90% RH or below
-20C ~ +55C (+32F ~
+104F) / 90% RH or below
-30C ~ +60C (-22F ~ +140F) / 90% RH or below Weather Resistant N/A DC 5V/2A 4.2W micro USB PoE(802.3af, Class3) 4.7W RJ45(PoE) Item Mechanical Color / Material Dimension (xH) Weight Adaptor Operating temperature Color / Material Dimensions Cable Length Plug Type SNH-V6430BN Description SNH-V6430BNH White / Plastic 69mm 42.5mm (69mm 48.4mm 99.5mm with bracket) 163g 0C ~ +40C (+32F ~ +104F) White / Plastic 68mm 38mm 27mm 2.5m micro USB 78mm 72mm (78mm 118.5mm with bracket) 271g 60mm 96.6mm 36mm Distance between the router and the camera: 70m max.
(based on CAT5e, at a room temperature of 25C) RJ45 04 A p p e n d x i 41 Product Appearance (SNH-V6430BN) unit: mm (inch) 69 42.5
. 5 9 9 42 English Product Appearance (SNH-V6430BNH) unit: mm (inch) 78 72 04 A p p e n d x i 43 Problem The video from the camera is temporarily lost. No sound is output from the video. I forgot my Camera password. I want to change my password and/or email address. Camera will be connected in a relay mode. Action
-
The video from the camera can be delayed according to a network delay. Please check if the camera is installed in a place of proper wireless Internet communications. turned On in your smart phone app.
- Click the Voice icon in the video playback page, or check if the voice is
- Some internet service providers do not support audio outputs in relay mode.
-
- Press and hold the camera reset button for 10 seconds to factory reset the You must create a new camera password. camera, and then register the camera again.
- After logging in, click on the <Account>. Select the item (password, or email address) and enter your information.
- Check the UPnP setting of the router.
- A network upload speed of at least 3.5Mbps (1080p) is recommended.
- Depending on the policy of your service provider, you can access in relay mode. Troubleshooting If you encounter a problem with your system, see the table below to solve the problem as quickly and easily as possible. Please follow the instruction below:
Action
-
-
- Move to Log-in page Forgot your ID/Password?, and enter the registered e-mail address to which we will send you the user ID and/or a new password. It can be spammed out depending on the policy of the email server. After logged in, it is advisable to change the temporary password provided. The cable connecting the router to the camera should have a length of 70m or less (based on CAT5e LAN cable) If the green light on the camera state LED turns off frequently, it may be because the camera is installed in an environment with a poor wireless Internet connection.
- Check the password for the wireless hub and try again.
- Check whether the serial number entered matches the label on the camera.
-
- Check whether the LED light of the camera is yellow or orange.
-
Enter the correct password for the camera registered again and try to register the camera again. If this fails to resolve the problem, factory reset the camera and repeat the procedure from the beginning.
(To factory reset the camera, press and hold the RESET button on the camera for 10 seconds. The camera will be restarted when the camera is factory reset.) Problem I forgot my user ID/
password. Camera is not connected to the wireless hub. After logged in, I failed to register the camera. 44 English Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Head Office 86 Cheonggyecheon-ro Jung-gu Seoul 04541 Korea Tel +82.2.729.5277, 5254 Fax +82.2.729.5489 www.hanwha-security.com
100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Tel +1.877.349.3149
2nd Floor, No. 5 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, UK Tel#1 00800.8010.8022 Tel#2 +31.77.326.1580
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-09-09 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2016-09-09
|
||||
1 2 | Applicant's complete, legal business name |
Hanwha Techwin Co., Ltd.
|
||||
1 2 | FCC Registration Number (FRN) |
0020229910
|
||||
1 2 | Physical Address |
6, Pangyo-ro 319 Beon-gil, Bundang-gu Seongnam-si
|
||||
1 2 |
6, Pangyo-ro 319 Beon-gil, Bundang-gu
|
|||||
1 2 |
Gyeonggi-do, N/A
|
|||||
1 2 |
South Korea
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
L******@ul.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
NLM
|
||||
1 2 | Equipment Product Code |
SNHV6430BNH
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
J******** K******
|
||||
1 2 | Title |
Principal Research Engineer
|
||||
1 2 | Telephone Number |
82-70********
|
||||
1 2 | Fax Number |
82-31********
|
||||
1 2 |
j******@hanwha.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | HOME CAMERA | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output power listed is conducted. This device supports 20MHz and 40MHz bandwidth for 802.11n. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
1 2 | Output power listed is conducted. This device supports 20MHz, HT40 and HT80 bandwidth for 802.11n/ac. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
KES Co., Ltd.
|
||||
1 2 | Name |
I**** R****
|
||||
1 2 | Telephone Number |
82-31********
|
||||
1 2 | Fax Number |
82-31********
|
||||
1 2 |
k******@kes.co.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.1460000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 CC | 5180 | 5240 | 0.014 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 38 CC | 5260 | 5320 | 0.017 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15E | 38 CC | 5500 | 5720 | 0.017 | |||||||||||||||||||||||||||||||||||
2 | 4 | 15E | 38 CC | 5745 | 5825 | 0.01 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC