FCC ID: MCL-T60H42400 Laptop PC with Wireless LAN Card

VAIO Computer Quick Start PCG-GRS100 Series Notice to Users ............................................5 Setting Up ..................................................15 Unpacking Your Computer .......................................16 Applying Ergonomics ...............................................18 Locating Controls and Ports......................................19 Getting Started ..........................................25 Turning On Your Computer ......................................26 Using the Touch Pad .................................................29 Registering Your Computer ......................................31 Locating Your VAIO Computer User Guide ............32 Setting Up A Dial-Up Connection ............................34 Turning Off Your Computer .....................................36 Expanding Your Computing Power .........39 Upgrading Memory ...................................................40 Locating Preinstalled Programs ................................40 Using the Recovery CDs...........................41 Application and System Recovery CDs ....................42 Using Your Recovery CDs........................................42 Caring for Your Computer ........................47 Storing Your Computer .............................................48 Using Cables and Connections..................................48 Cleaning Your Computer ..........................................49 3 VAIO Computer Quick Start Handling the LCD Screen......................................... 49 Troubleshooting........................................51 Troubleshooting Your Computer.............................. 52 Troubleshooting the LCD Screen ............................. 56 Troubleshooting the Mouse and Touch Pad ............. 56 Support Options ........................................................ 59 Program Support Information................................... 60 Index...........................................................63 4 Notice to Users 2002 Sony Electronics Inc. All rights reserved. This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval. SONY ELECTRONICS INC. PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR SUCH OTHER INFORMATION. IN NO EVENT SHALL SONY ELECTRONICS INC. BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Sony Electronics Inc. reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user license agreement. This product contains software owned by Sony and licensed by third parties. Use of such software is subject to the terms and conditions of license agreements enclosed with this product. Some of the software may not be transported or used outside the United States. Software specifications are subject to change without notice and may not necessarily be identical to current retail versions. Updates and additions to software may require an additional charge. Subscriptions to online service providers may require a fee and credit card information. Financial services may require prior arrangements with participating financial institutions. As an ENERGY STAR Partner, Sony Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, displays, printers, facsimiles and copiers. Their standards and logos are uniform among 5 VAIO Computer Quick Start participating nations. ENERGY STAR is a U.S. registered mark. The Wireless LAN functionality*, which is incorporated into selected models only, has passed Wi-

Fi certification and complies with the interoperability specifications established by WECA (Wireless Ethernet Compatibility Alliance). intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The i.LINK connection may vary, depending on the software applications, operating system, and compatible i.LINK devices. All products with an i.LINK connection may not communicate with each other. Please refer to the documentation that came with your compatible i.LINK device for information on operating conditions and proper connection. Before connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk drive, confirm their operating system compatibility and required operating conditions. All other trademarks are trademarks of their respective owners.

* Selected models may come with a PC Card. Microsoft note Sony, DVgate, Handycam, i.LINK, Mavica, MagicGate Memory Stick MEMORY STICK

, Memory MEMORY STICK

, MovieShaker, VAIO, and the Stick VAIO logo are trademarks of Sony Corporation. Microsoft, Windows Media, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation. Intel, SpeedStep, and Pentium are trademarks or registered trademarks of Intel Corporation. PS/2 is a registered trademark of IBM. Acrobat Reader, Photoshop, Photoshop Elements, and Premiere are trademarks of Adobe Systems Incorporated. PowerPanel is a trademark of Phoenix Technologies Ltd. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is 6 Certain software product(s) included with this computer may include features such as copy protection and content management technology. Use of the software product(s) requires agreement to applicable end user agreements and full compliance with applicable product activation procedures. Product activation procedures and privacy policies will be detailed during initial launch of the software product(s), or upon certain reinstallations of the software product(s) or reconfiguration of the computer, and may be completed by Internet or telephone

(toll charges may apply). Owners Record The model number and serial number are located on the bottom of your Sony VAIO computer. Refer to the model and serial number when you call your Sony Service Center. Model Number: PCG-8E1L, 8E2L Serial Number:________________________ Safety Information

. WARNING To prevent fire or shock hazard, do not expose your computer to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Never install modem or telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Never touch uninsulated telephone wire or terminals unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines. Avoid using the modem during an electrical storm. Do not use the modem or a telephone to report a gas leak in the vicinity of the leak. A socket outlet should be as close as possible to the unit and easily accessible. i.LINK, PC Card, and USB connectors are not supplied with Limited Power Sources Notice to Users To change the backup battery, please contact your nearest Sony Service Center. Caution: The use of optical instruments with this product will increase eye hazard. As the laser beam used in this product is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

(For CD-RW/DVD Combo Drive, CD-ROM drive, DVD-ROM drive) Danger:

Visible and invisible laser radiation when open. Avoid direct exposure to beam. Caution: To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. AVERTISSEMENT Pour prvenir tout risque dincendie ou dlectrocution, garder cet appareil labri de la pluie et de lhumidit. Pour prvenir tout risque dlectrocution, ne pas ouvrir le chssis de cet appareil et ne confier son entretien qu une personne qualifie. Ne jamais effectuer linstallation de fil modem ou tlphone durant un orage lectrique. Ne jamais effectuer linstallation dune prise tlphonique dans un endroit mouill moins que la prise soit conue cet effet. Ne jamais toucher un fil tlphonique dcouvert ou un terminal moins que la 7 VAIO Computer Quick Start ligne tlphonique nait t dbranche de linterface rseau. Soyez trs prudent lorsque vous installez ou modifiez les lignes tlphoniques. vitez dutiliser le modem durant un orage lectrique. N'utilisez pas le modem ni le tlphone pour prvenir d'une fuite de gaz quand vous tes prs de la fuite. Lappareil doit tre le plus prs possible dune prise murale pour en faciliter laccs. Des connecteurs i.LINK, PC Card, et USB ne sont pas fournis avec des Sources dnergie Limites. Pour changer la pile de rechange, veuillez contacter votre centre de service Sony le plus prs. Avertissement: L'utilisation d'instruments optiques avec ce produit augmente les risques pour les yeux. Puisque le faisceau laser utilis dans ce produit est dommageable pour les yeux, ne tentez pas de dsassembler le botier. Adressez-vous un agent de service qualifi.

(Pour le lecteur Combo de CD-RW/DVD, le lecteur CD-

ROM, le lecteur DVD-ROM) Danger: Radiation laser visible et invisible si ouvert. vitez lexposition directe au faisceau. Attention : Afin de rduire les risques d'incendie, n'utilisez qu'un cordon de communication N0. 26 AWG ou plus gros. 8 If you have questions about this product, you can reach the Sony Customer Information Service Center at 1-888-4-SONY-PC; or write to the Sony Customer Information Service Center at 12451 Gateway Blvd., Ft. Myers, FL 33913 or find Sony Customer Service on the Web at: http://www.sony.com/pcsupport. Regulatory Information Declaration of Conformity Trade Name:

Sony Model No.:

PCG-8E1L, 8E2L Responsible Party:

Address:

Telephone:

(For FCC-related matters only.) Sony Electronics Inc. 680 Kinderkamack Road Oradell, NJ 07649 201-930-6972 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Only peripherals (computer input/output devices, terminals, printers, etc.) that comply with FCC Class B limits may be attached to this computer product. Operation with non-

compliant peripherals is likely to result in interference to radio and television reception. All cables used to connect peripherals must be shielded and grounded. Operation with cables, connected to peripherals, that are not shielded and grounded, may result in interference to radio and television reception. FCC Part 68 This equipment complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC Ringer Equivalency Number (REN) for this equipment. If requested, this information must be provided to the telephone company. Notice to Users This modem uses the USOC RJ-11 telephone jack. The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to the line, as determined by the total RENs, contact the telephone company to determine the maximum REN for the calling area. If the terminal equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operations of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service. If trouble is experienced with this equipment, you can reach the Sony Customer Information Service Center at 1-888-4-SONY-PC; or write to the Sony Customer Information Service Center at 12451 Gateway Blvd., Ft. Myers, FL 33913 or find Sony Customer Service on the Web at: http://www.sony.com/pcsupport. Repair of this equipment should be made only by a Sony Service Center or Sony authorized agent. For the Sony Service Center nearest you, call 1-888-4-SONY-PC (1-888-476-6972). This equipment cannot be used on public coin service provided by the telephone company. Connection to Party Line Service is subject to 9 Pour empcher que cet appareil cause du brouillage au service faisant lobjet dune licence, il doit tre utilis linterieur et devrait tre plac loin des fentres afin de fournir un cran de blindage maximal. Si le matriel (ou son antenne dmission) est install a lexterieur, il doit faire lobjet dune licence. Lexpression IC: avant le numro dhomologation/enregistrement signifie seulement que les spcifications techniques dIndustrie Canada ont t respectes. Telephone Consumer Protection Act of 1991

(United States) The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone facsimile machine unless such message clearly contains, in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. In order to program this information into your facsimile machine, see your fax software documentation. VAIO Computer Quick Start state and possible provincial tariffs. (Contact the state or provincial utility service commission, public service commission, or corporation commission, for information.) FCC Radio Frequency Exposure (United States) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8 inches (20 cm) between the radiator and body (excluding extremities: hands, wrists, and feet). Users are not permitted to make changes or modify the system in any way. IC RSS-210 (Canada) Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. Lutilisation de ce dispositif est autorise seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) lutilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. 10 Telephone Consumer Guidelines (Canada) Please refer to your telephone directory under Privacy Issues and/or Terms of Service. For more detailed information, please contact:

CRTC Terrasses de la Chaudire, Tour centrale 1 promenade du Portage, 5 tage Hull PQ K1A 0N2. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. RECYCLING LITHIUM ION BATTERIES RECYCLING LITHIUM-ION BATTERIES Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-

822-8837, or visit http://www.rbrc.org/. Caution: Do not handle damaged or leaking Lithium-Ion batteries. Notice to Users RECYCLAGE DES ACCUMULATEURS AUX IONS DE LITHIUM RECYCLAGE DES ACCUMULATEU RS AUX IONS DE LITHIUM Les accumulateurs aux ions de lithium sont recyclables. Vous pouvez contribuer prserver lenvironnement en rapportant les piles uses dans un point de collection et recyclage le plus proche. Pour plus dinformations sur le recyclage des accumulateurs, tlphonez le numro gratuit 1-800-822-8837 (Etats-Units et Canada uniquement), ou visitez http://www.rbrc.org/. Avertissment: Ne pas utiliser des accumulateurs aux ions de lithium qui sont endommages ou qui fuient. 11 INDUSTRY CANADA NOTICE NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. The Ringer Equivalence Number (REN) for this terminal equipment is 0.2. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five. VAIO Computer Quick Start Do not handle damaged or leaking lithium ion batteries. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturers instructions. The battery pack used in this device may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 140F (60C) or incinerate. Dispose of used battery promptly. Keep away from children. Ne pas utiliser des batteries au lithium ionis qui sont endommages ou qui fuient. Une batterie non conforme prsente un danger d'explosion. La remplacer seulement par une batterie identique ou de type quivalent recommand par le fabricant. vacuer les batteries uses selon les directives du fabricant. La manutention incorrecte du module de batterie de cet appareil prsente un risque d'incendie ou de brlures chimiques. Ne pas dmonter, incinrer ou exposer une temprature de plus de 60C. vacuer promptement la batterie use. Garder hors de porte des enfants. 12 AVIS DINDUSTRIE CANADA REMARQUE: Cet quipement est conforme aux Spcifications Techniques des quipements Terminaux dIndustrie Canada en vigueur. Le numro didentification en est la preuve. Labrviation IC, avant le numro didentification, signifie que lenregistrement sest droul conformment une Dclaration de Conformit stipulant que les spcifications techniques dIndustrie Canada ont t respectes. Cela ne veut pas dire quIndustrie Canada a approuv cet quipement. Le Nombre quivalent de Sonneries (REN) de cet quipement terminal est 0,2. Le REN attribu chaque quipement terminal indique le nombre maximum de terminaux que lon peut connecter une interface tlphonique. Il est possible de raccorder une interface plusieurs combinaisons dappareils, mais la somme des Nombres quivalents de Sonneries de tous ces appareils ne doit pas dpasser cinq. CD-RW/DVD-ROM Laser Diode Properties Laser Output:

Wave Length:

64 W (CD) 1.28 W (DVD) 784 nm (CD) 660 nm (DVD) The use of optical instruments with this product will increase eye hazard. As the laser beam used in this product is harmful to the eyes, do not attempt to disassemble the drive cabinet. Refer servicing to qualified personnel only. Notice to Users Visible and invisible laser radiation when open. Avoid direct exposure to beam. 13 VAIO Computer Quick Start 14

U S E R S M A N U A L Model Name T60H424 Ambit Microsystems Corporation 5F-1, 5 Hsin-An Rd., Hsinchu Science-Based Industrial Park, Hsinchu, Taiwan, R.O.C. TEL: 886-3-5784975, FAX: 886-3-5799178 Website: http://www.ambit.com.tw/

1 Ambit Microsystems Corporation Contents Chapter 1 About the T60H424 MiniPCI Card 1-1 Features 1-2 Applications 1-3 Product Kit Chapter 2 Network Configuration and Planning 2-1 Network Topology 2-2 Roaming Chapter 3 Adapter Installation and Configuration Windows 98 / NT / 2000 3-1 System Requirements 3-2 Inserting the Adapter 3-3.1 T60H424 Driver Installation - Windows 98 3-3.2 Adapter Configuration - Windows 98 3-3.3 Protocol Installation - Windows 98 3-4 T60H424 Setup for Windows 2000 Chapter 4 Installing and Navigating the PRISM Configuration Utility 4-1 LAN-Express Configuration Utility - Installation 4-2 LAN-Express Configuration Utility - Navigation Appendix A Troubleshooting Appendix B Glossary 2 Ambit Microsystems Corporation Chapter 1 About the T60H424 MiniPCI Card The IEEE 802.11 T60H424 MiniPCI Card is compatible with any standard, notebook computer Type II or Type III PCMCIA slot /

Type III MiniPCI slot. As a Plug-and-Play device, Windows 95/98/2000 will automatically recognize the T60L198 PCMCIA and initiate the installation process. Upon successful installation, the T60H424 MiniPCI card will communicate seamlessly with other T60H424 wireless home and office networking products. 1-1 FEATURES 1. Supports up to 11 Mbps data rate: T-1 line alternative/replacement that dramatically cuts costs. 2. Working range up to 800 ft. in an open environment enhances mobility. 3. Supports point-to-point and point-to-multipoint access provides increased flexibility. 4. Seamless connectivity to wired Ethernet and PC network LANs offers quick, trouble-free integration with existing networks. 5. Robust Direct Sequence Spread Spectrum (DSSS) technology provides secure, interference-resistant wireless connection. 6. Wireless connections eliminate the hassle and cost of cabling. 7. Supports a wide range of LAN (Local Area Network) Network Operating Systems (NOS) including Windows 98 and Windows 2000 8. Easy Plug and Play installation(T60L198). 9. Omni - directional antenna included 10. Greater flexibility to locate or move networked PCs 1-2 APPLICATIONS T60H424 products offer a fast, reliable, cost-effective solution for wireless client access to the network the following applications and environments:

Remote access to corporate network information

E-mail, file transfer and terminal emulation

Difficult-to-wire environments

Historic or older buildings

Buildings with asbestos insulation

Open areas where wiring is difficult to employ

Frequently changing environments

Retailers, manufacturers or other organizations that frequently rearrange the workplace or relocate

Temporary LANs for special projects or peak time usage

Trade shows, exhibitions and construction sites that employ temporary networks. 3 Ambit Microsystems Corporation Retailers, airline and shipping companies that need additional workstations for a peak period and Auditors that require workgroups at customer sites.

Access to database for mobile workers

Medical, Technical and Retail specialists that require roaming access to a database or other network resources.

SOHO (Small Office and Home Office) users

Perfect for users that need a small, easy-to-install network that deploys rapidly.

Inter-building connection

Wireless building-to-building networks are quickly and easily installed, require no monthlylease fees, and provide the flexibility to reconfigure easily. 1-3 PRODUCT KIT The T60H424 product kit includes the following items. Ensure that the items in the following list have been included. If any of the listed items are missing, please contact your local dealer.

1 X T60L198 PCMCIA Type II Adapter or Type III T60H424 MiniPCI Adapter

1 X Driver

1 X User Manual & Utility Chapter 2 Network Configuring and Planning The T60H424 supports legacy Ethernet LAN network configuration options as defined by the IEEE 802.11 standards committee. The T60H424 can be configured as:

. Ad-Hoc for departmental or SOHO LANs. Infrastucture for enterprise LANs. LAN-Interconnection for to point-to-point link as a campus backbone. 2-1 Network Topology 4 Ambit Microsystems Corporation Notebook with T60L198/T60L244 Desktop PC with T60L198/T60L244 Ad-Hoc Wireless LAN Desktop PC with T60L198/T60L244 Notebook with T60L198/T60L244 Fig.1 Ad-Hoc Wireless LAN An Ad-Hoc wireless LAN is a group of computers. Each equipped with on T60H424 adapter, connected as an independent wireless LAN.Computers in a specific Ad-Hoc wireless LAN must be configured to share the same radio channel. Ad-Hoc wireless LAN configurations are appropriate for branch level departments or SOHO operations. File Server Desktop PC Desktop PC Desktop PC with T60L198/T60L244 Access Point Access Point Desktop PC with T60L198/T60L244 Desktop PC with T60L198/T60L244 Notebook with T60L198/T60L244 Notebook with Desktop PC with T60L198/T60L244 T60L198/T60L244 The T60H424 provides access to a wired LAN for wireless workstations.An integrated wireless and wired LAN is called an Fig.2 Infrastructure Wireless LAN Configuration Infrastructure configuration. A group of T60H424 PC users and an Access Point compose a Basic Service Set (BSS).Each T60H424 can talk to any computer in the wired LAN infrastructure via the Access Point. An Infrastructure configuration extends the accessibility of a T60H424 equipped PC to a wired LAN and doubles the effective 5 Ambit Microsystems Corporation wireless transmission range for 2 T60H424 PCs. Since the Access Point is able to forward data within its BSS, the effective transmission range in an infrastucture LAN is doubled. Notebook with T60L198/T60L244 Notebook with T60L198/T60L244 Notebook with T60L198/T60L244 Access Point Notebook with T60L198/T60L244 Ad-Hoc Infrastructure Fig 3 The effective transmission ranges 2-2 Roaming Infrastructure mode also supports roaming capabilities for mobile users More than one BSS can be configured as an Extended Service Set (ESS). The continuous network allows users to roam freely within an ESS. All T60H424 PCs and Access Point within one ESS must be configured with the same ESSID and use the same radio channel. File Server Desktop PC Desktop PC Ess Desktop PC with T60L198/T60L244 Access Point Access Point Desktop PC with T60L198/T60L244 BSS1 BSS2 Notebook with T60L198/T60L244 Notebook with T60L198/T60L244 Fig.4 Roaming in an Extended Service Set (ESS) Before enabling an ESS with roaming capability, choosing a feasible radio channel and optimum Access Point position is recommended. Proper Access Point positioning combined with a clear radio signal will greatly enhance performance. 6 Ambit Microsystems Corporation Chapter 3 Adapter Installation and Configuration Windows 98 / 2000 3-1 SYSTEM REQUIREMENTS In order to install and use the T60L198 PCMCIA/T60H424 MiniPCI card your PC system must meet the following requirements:

A PCMCIA Type II or Type III slot / Type III MiniPCI slot

PCMCIA/MiniPCI revision 2.10 compliant card and socket services

Windows 98 (with the Floppy, for use during installation)

500 Kbytes free disk space for utility and driver installation 3-2 INSERTING THE ADAPTER To insert the T60L198/ T60H424 Network Adapter into a notebook computer, do the following:

1. Locate an available Type II or Type III PCMCIA slot / Type III MiniPCI slot. 2. With the PCMCIA adapters 68-pin / MiniPCI Adapters 124-pin connector facing the PCMCIA/MiniPCI slot and the T60H424 MiniPCI label facing up slide the PCMCIA adapter completely into the PCMCIA slot , the MiniPCI Adapter completely into the MiniPCI slot. PCMCIA slot MiniPCI slot Notebook with T60L198/T60L244 Notebook with T60L198/T60L244 Fig. 5.1 Insert the PCMCIA Adapter into Notebook Fig. 5.2 Insert the MiniPCI Adapter into Notebook After properly inserting the Network Adapter into your notebook, continue with the T60H424 driver and Lan-Express Configuration Utility installation. NOTE: The PCMCIA slot allows hot swap of PCMCIA adapter. You may insert or remove the 7 Ambit Microsystems Corporation T60L198 / PCMCIA adapter from the slot anytime, even when the power of your computer is on. NOTE: Windows 98 requires that the Network card and socket services must be compliant with the PCMCIA revision 2.10 specification. Please check the documentation of the PCMCIA/MiniPCI driver before installing the T60L198 PCMCIA/T60H424 MiniPCI adapter. 3-3.1 T60H424 DRIVER INSTALLATION -WINDOWS 98 Note: Before proceeding, have the Windows 98 Floppy ready, as it will be required during the software installation process. 1. Insert the T60H424 MiniPCI adapter into a standard Type II or Type III PCMCIA /Type III MiniPCI card slot, as described in the preceding section. 2. Windows 98 will automatically detect the T60H424 and prompt you to install the necessary driver. Click Next to begin the installation.

(PCMCIA Adapter is left-hand or right-hand side ; MiniPCI Adapter is button side) 3. Check Search for the best driver click Next. 8 Ambit Microsystems Corporation 4. Check floppy disk drivers , click Next. Windows 98 will automatically find the file. 5. Windows 98 will then acknowledge that it has found the appropriate driver, click "Next". 9 Ambit Microsystems Corporation 6. Clink Finish to compete the installation. 3-3.2 ADAPTER CONFIGURATION WINDOWS 98 After successful installation of the T60H424 and its driver, continue the installation process by configuring the T60H424 adapter properties. To configure the T60H424 Adapter complete the following steps :

1.From the Control Panel, double-click the Network icon. 10 Ambit Microsystems Corporation 2.Select "LAN-Express IEEE 802.11 PC Card Adapter" or "LAN-Express IEEE 802.11 MiniPCI Adapter" from the list and press the Properties button. 11 Ambit Microsystems Corporation 3. From the Properties menu select the Advanced tab. 12 Ambit Microsystems Corporation 4. Select Channel from the list, and choose a Value from the drop down list. FCC regulations require a Value between 1 and 11. 5. Select Network Type, and choose Infrastructure or Ad-Hoc as the Value. 13 Ambit Microsystems Corporation Note: Infrastructure mode allows a wireless adapter to communicate with a wired network, While Ad-Hoc mode allows wireless-to-wireless communication. Consult your System Administrator for information about your network communication type. For more information About Infrastructure and Ad-Hoc networks, see Chapter 2 of this manual 6. Select Power Save Mode and choose a Value. NOTE: To allow uninterrupted data communication, choose Disabled as the Value. Choosing Enabled allows your notebook to enter sleep mode, however, this will interrupt data communication. Consult your System Administrator to find out the best setting for your network type. For more information about Power Save Mode, see the chapter entitled LAN-Express Configuration Utility in this manual. 8. Select SSID; enter a Value of ANY. 14 Ambit Microsystems Corporation NOTE: The SSID can have any value, but should have the same value as the Access Point

(AP). In Ad-Hoc mode, all clients should share the same SSID 9. Select Transmit Rate, and choose a Value. 15 Ambit Microsystems Corporation NOTE: Fixed 11 Mb/s is the preferred Value for environments where the client has line of sight access and is a short distance away from the AP. Fully Auto is the recommended setting for clients that are farther away from the AP and where there may be interference between the client and the AP. 10. Select Use Wep, and choose a Value. 16 Ambit Microsystems Corporation NOTE: Wired Equivalent Privacy (Wep) is an encryption scheme used to protect wireless data communication. Selecting Disabled will prevent you from sharing data with other computers if your network uses Wep. If your network is Wep enabled, you must choose 64bit or 128bit. Consult your System Administrator for more information about your network type. For more information about Wep, see the chapter entitled PRISM Configuration Utility in this manual. 11. After the configuring the Properties, click OK and continue with the Protocol Installation, described in the following section. 3-3.3 PROTOCOL INSTALLATION WINDOWS 98 Before continuing with the Protocol installation consult your System Administrator for details about your specific network. To install network protocols complete the following steps. 1. From the Control Panel double-click the Network icon. 2. Select LAN-Express IEEE 802.11 PC Card Adapter or LAN-Express IEEE 802.11 MiniPCI Adapter and click Add. 17 Ambit Microsystems Corporation 3. Highlight Protocol and click Add. 4. Select Microsoft from the list of Manufacturers and TCP-IP from the list of Network Protocols, click OK 18 Ambit Microsystems Corporation 5. Select TCP/IP and click Properties. Repeat step 2 5 to install other protocols such as NetBeui or IPX/SPX. NOTE: The following steps apply to DHCP servers. Consult your system administrator for specific information regarding your server type, and for help in specifying an IP address if you do 19 Ambit Microsystems Corporation not use a DHCP server and must manually enter the IP address and DNS number. 6. Check Obtain an IP address and click OK. If you are using a DHCP server the IP address will be entered automatically. 7. From the Network menu highlight Client from Microsoft Networks, and click" File and Print Sharing. 20 Ambit Microsystems Corporation 8. Check both boxes and click OK. 9. Enter a Computer name, Workgroup and Computer Description, click OK 21 Ambit Microsystems Corporation 11. You will be prompted to restart your computer, click Yes to complete the installation. Note: Please see the trouble shooting if you encounter some problem while installing the PC-Card or your PC-Card is non-functional. 3-5 T60H424 SETUP FOR WINDOWS 2000 1. Insert the T60H424 MiniPCI adapter into a standard Type II or Type III PCMCIA card slot / Type MiniPCI card slot, as described in the preceding section. 2. Windows 2000 will automatically detect the T60H424 and prompt you to install the necessary driver. Click Next to begin the installation. 22 Ambit Microsystems Corporation 3. Check search for the best driver click Next. 4. Check floppy disk drivers , click Next. Windows 2000 will automatically find the file. 23 Ambit Microsystems Corporation 5. Windows 2000 will then acknowledge that it has found the appropriate driver, click "Next". 6. Click Yes to continue the installation. 24 Ambit Microsystems Corporation 7. Clink Finish to compete the installation. Chapter 4 Installing & Navigating the LAN-Express Configuration Utility 4-1 LAN-Express CONFIGURATION UTILITY - INSTALLATION Insert the LAN-Express Network Configuration Utility disk into an available floppy disk drive. From the "Run" window type "A:\utility \setup.exe" (where "A" represents a floppy disk drive). 4-2 LAN-Express CONFIGURATION UTILITY - NAVIGATION 25 Ambit Microsystems Corporation The following section describes and defines the various functions of the LAN-Express Network Configuration Utility. This utility provides quick access to all adapter settings. After installation is complete, a LAN-Express utility icon will appear in the Start ->Program->Wireless LAN Card Utility->Wireless LAN Utility Icon. The LAN-Express About Icon: Clicking the upper left corner icon in the LAN-Express Utility will open the About, here you will find Version, Copyright and Manufacturer information. The LAN-Express Card Status: Clicking the Card Status button in the LAN-Express Utility will open the Card Status, The Link Info menu provides information about the current link between the adapter and the base station(or AP). 26 Ambit Microsystems Corporation The LAN-Express Quality Test: Clicking the Quality Test button in the LAN-Express Utility will open the Quality Test, providing a simple test on two station. While one station Set a Master mode, another station set a slave mode. Master station must set slave stations Mac Address. If a station is tested under loopback test mode, it should use AP of LAN-Express. The LAN-Express Card Monitor: Clicking the Card Monitor button in the LAN-Express Utility 27 Ambit Microsystems Corporation will open the Card Monitor, It can monitor a physical layer in the Adapter currently. The LAN-Express Configuration: Clicking Config Adapter in the LAN-Express Utility will open the Config Adapter, providing quick access to all adapter settings. The following image shows the LAN-Express Configuration Utility. It can change every parameters. 28 Ambit Microsystems Corporation The LAN-Express Card Encryption: Clicking the Card Encryption button in the LAN-Express Utility will open the Card Encryption, An acronym for Wired Equivalent Privacy, WEP is an encryption scheme used to protect your wireless data communications. WEP uses a combination of 64-bit keys,128-bit keys to provide access control to your network and encryption security for every data transmission. To decode a data transmission, each wireless client on the network must use an identical 64-bit key,128-bit key. The LAN-Express Firmware Upgrade: Clicking the Firmware Upgrade button in the LAN-Express Utility will open the Firmware Upgrade, It can upgrade a firmware of differ version. 29 Ambit Microsystems Corporation Configuration: Selecting this tab opens the Configuration menu. Here you will find options for configuring your adapter. Description of Settings Following is an explanation of each adapter setting presented by the Configuration menu. Mode: The Mode setting determines the architecture of your wireless LAN. Choose Ad-Hoc or Infrastructure Mode depending on your network type. A brief explanation of each mode follows:

Ad-Hoc: This mode is used for a simple peer-to-peer network. This type of network allows the sharing of local resources only between wireless clients without a wireless Access Point (AP).

Infrastructure: This mode allows a wireless LAN to be integrated into an existing wired network through an AP. Infrastructure type networks also permit roaming between Access Points while maintaining connection to all network resources. Infrastructure mode provides additional features, such as WEP security, power saving and extended range. SSID: An acronym for Service Set Identifier, SSID is the unique name shared among all clients and Access Points in a wireless network. The SSID must be identical for all clients or Access Points participating in the same network. The SSID is case sensitive and must not exceed 30 characters. Ethernet Conversion: The RFC1042 mode is the 802.11 standard conversion method and is selected by default. If compatibility with older wireless LAN systems is necessary select another conversion implementation from the Ethernet Conversion drop down list. Tx Rate: The transmit rate or Tx Rate selects the allowable transfer rates of the wireless client. To optimize performance and range, the Tx Rate should be set to Fully Automatic, which will 30 Ambit Microsystems Corporation automatically adjust the transfer speed for best performance and longest range. Note: The Tx rate setting must be supported by the AP. If the AP does not support the Tx rate, undesired results may occur. WEP: An acronym for Wired Equivalent Privacy, WEP is an encryption scheme used to protect your wireless data communications. WEP uses a combination of 64-bit keys,128-bit keys to provide access control to your network and encryption security for every data transmission. To decode a data transmission, each wireless client on the network must use an identical 64-bit key,128-bit key. NOTE: This feature is only available in Infrastructure Mode and must also be enabled on the Access Point. Select the WEP tab to enable or disable this feature. PS Mode: Power Saving Mode enables or disables the power saving features of your wireless adapter. When enabled on a laptop, the power saving mode can reduce power consumption by the wireless card and extend the battery life of your laptop. This setting is only implemented in a network operating in Infrastructure mode.

Changing the PS mode: The PS Mode on your adapter is set to Disabled by default. To change the setting, select Enabled from the drop-down list, click OK and wait a few seconds. The screen will then is updated and show the current Connection Status, Link Quality and Signal Strength. Channel: This setting specifies the default 802.11 channel used by the Wireless LAN communication. In an Infrastructure type network without an Access Point active on the default channel, clients will scan through all available channels searching for a network with matching SSID.

Changing the Channel: Changing the channel is only effective in Ad-Hoc networks. Networks operating in Infrastructure mode automatically scan for a channel. The following table presents contains the operational channel frequency for several countries. Appendix A Troubleshooting Problem Solving My computer does not recognize the T60H424. Probable Solution:

The T60H424 is not properly inserted into the PCMCIA/MiniPCI slot.

Ensure that the T60H424 has been inserted into an available PCMCIA/MiniPCI slot. The T60H424 does not work properly. Probable Solution:

Insert the PCMCIA/MiniPCI adapter into Notebooks slot again. A beep should be heard if the adapter is properly inserted. 31 Ambit Microsystems Corporation

Check the I/O cable that connects the RF module and the PCMCIA/MiniPCI adapter. The power LED(T60L198) indicator will be active if the cable is properly connected.

For non-Windows 95/98 environments, ensure that a PCMCIA/MiniPCI card service driver is installed in your computer.

1) Click on the Control Panel and then on PC-Card/MiniPCI. Check whether it has PCMCIA/MiniPCI card in one of the sockets or not. If you find LAN-Express IEEE 802.11 PC-Card Adapter or LAN-Express IEEE 802.11 MiniPCI Adapter in one of the sockets, it means the card is detected properly. If you see the yellow sign of

question-mark(?), the resources are conflicting.

2)Right click on My Computer and the select Properties. Select the device Manager and click on the Network Adapter. You will find LAN-Express IEEE 802.11 PC-Card Adapter or LAN-Express IEEE 802.11 MiniPCI Adapter if it is installed successfully. If you see the Yellow sign the resources are conflicting. Click on PCMCIA/MiniPCI card and then on PCMCIA/MiniPCI Card service, you can see the status of PCMCIA/MiniPCI. card. If there are yellow sign either on adapter or PCMCIA/MIniPCI card, please check followings.

2-1) Check if your Notebook supports 3.3V card.

2-2)Check if your Notebook has a free IRQ

2-3) Check that you have inserted the right card and have installed the proper driver. If the T60H424 does not function after attempting the above steps, remove the PCMCIA adapter, and do the following:

32 Ambit Microsystems Corporation

From the run window enter, c:\windows\system, locate and delete the Express.sys file

Open the Control Panel double-click System and delete LAN-Express IEEE 802.11 PC-card Adapter or LAN-Express IEEE 802.11 MiniPCI Adapter.

Restart the PC and repeat the hardware and software installation steps outlined in Chapters 3 and 4. The T60H424 station cannot communicate with other computers linked via Ethernet in the Infrastructure configuration. Probable Solution:

Ensure that the T60H424 with which the station is associated is powered on.

Confirm the station is configured with the same operating radio channel as the T60H424. If the IDs are different, change the T60H424 and all the stations within the BSS to another radio channel.

Ensure that the station is configured with the same security options as the T60H424, and can be turned off and on with the same security key.

Confirm that the BSS ID is the same as the T60H424 for a roaming disabled station. Alternately confirm that the ESS ID is the same as the T60H424 for a roaming enabled Station 33 Ambit Microsystems Corporation Appendix B Glossary Access Point - An internetworking device that seamlessly connects wired and wireless networks together. Ad-Hoc - An Ad-Hoc wireless LAN is a group of computers each with wireless adapters, connected as an independent wireless LAN. Backbone - The core infrastructure of a network, the portion of the network that transports information from one central location to another central location. The information is then off-loaded onto a local system. Base Station - In mobile telecommunication, a base station is the central radio transmitter/ receiver that maintains communication with the mobile radio telephone sets within range. In cellular and personal communications applications, each cell or microcell has its own base station; each base station in turn is interconnected with other cells base. BSS - Stands for Basic Service Set. An Access Point associated with several wireless stations. ESS - Stands for Extended Service Set. More than one BSS can be configured as an Extended Service Set. An ESS is basically a roaming domain. Ethernet - A popular local area data communications network, originally developed by Xerox Corp., which accepts transmission from computers and terminals. Ethernet operates on 10 Mbps baseband transmission over shielded coaxial cable or over shielded twisted pair telephone wire. Infrastructure - An integrated wireless and wired LAN is called an Infrastructure configuration. PCMCIA - Personal Computer Memory Card International Association, which develops standards for PC cards, formerly known as PCMCIA cards, are available in three types which are about the same length and width as credit cards, but range in thickness from 3.3 mm (Type I) to 5.0 mm (Type II) to 10.5 mm (Type III). These cards can be used for many functions, including memory storage, as landline modems and as wireless LAN. Roaming - A function that allows one to travel with a mobile end system (wireless LAN mobile station, for example) through the territory of a domain (an ESS, for example) while continuously connecting to the infrastructure. RTS Threshold Transmitters contending for the medium may not hear each other. RTS/CTS mechanism can solve this Hidden Node Problem. Product S pecifications for T60H424 :

Radio: Complies with IEEE 802.11 Frequency Band: 2400 ~ 2483.5MHz ( for US, Canada, and ETSI 2400 ~ 2497MHz (for Japan) Modulation TYPE: CCK,BPSK,QPSK Operating Channels: IEEE 802.11 compliant 11 channels (US, Canada) 13 channels (ETSI) 14 channels (Japan) Radio Technology: Direct Sequence Spread Spectrum 34 Ambit Microsystems Corporation Data Rate: 1 / 2 / 5.5 / 11 Mbps Output Power: > 13.74dBm Receive sensitivity: Min. -76dBm for 11Mbps; Min. -80dBm for 5.5/2/1 Mbps ;(@BER 10E-5) Antenna Type: De-attached PCB patch diversity antenna or MMCX connector for external antenna Current Consumption : 3.3 V/5 V , Tx mode 350 m A (Max.) ; Rx mode 230 m A (Max.);

Package : PCMCIA Type II/MiniPCI Type III Certification: FCC Part 15 ETSI 300.328 ARIB STD33 & T66 Driver : Windows 95/98/2000/ME Warning This equipment must be installed and operated in accordance with provided instructions and a minimum 3 cm spacing must be provided between computer mounted antenna and persons body (excluding extremities of hands, wrist and feet) during wireless modes of operation. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. Warning

"NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT."

35 Ambit Microsystems Corporation 1. T60H424 is for OEM installation only. 2. "The antenna used for this transmitter must be installed to provide a separation distance of at least 3 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 3. OEM integrators are instructed to ensure that the End-User has NO manual instructions to remove or install the device (EUT). 36 Ambit Microsystems Corporation

EXHIBIT C - EUT PHOTOGRAPHS BM1 Antenna Left Side BM1 Antenna Right Side Power Adapter

Component View Solder View APPENDIX C - EUT PHOTOGRAPHS Shield Removed Component View BT1 Antenna Left Side BT1 Antenna Right Side

Component View Solder View APPENDIX C - EUT PHOTOGRAPHS Shield Removed Component View BT1 Antenna Left Side BT1 Antenna Right Side

FCC ID: MCLT60H42400 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, EXHIBIT A - FCC ID LABEL INFORMATION Proposed FCC ID Label 2.1875L x 1.0W Proposed Label Location on EUT Solder Side of EUT/FCC ID Label

FCC ID: MCL-T60H42400 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. EXHIBIT A - FCC ID LABEL INFORMATION Proposed FCC ID Label 2.1875L x 1.0W Proposed Label Location Rear Side of Laptop / Label Location

CABLE-ME Quanta BM1 Antenna Test Report Confidential 7/16/2002 Page:1 Sheng Tai VSWR For Left Antenna CABLE-ME 2.4 GHz = 1.332 2.45 GHz = 1.153 2.5 GHz = 1.192 Cable Length = 115mm Confidential 7/16/2002 Page:2 CABLE-ME XY Plane Radiation Pattern For Left Antenna

( 2.4 ~ 2.5 GHz ) HORIZONTAL POLARIZATION VERTICAL POLARIZATION Confidential 7/16/2002 Page:3 CABLE-ME Average Gain For Left Antenna

(dBi) XY-H XY--V Average Gain 2400 MHz 2450 MHz 2500 MHz

-10.81

-7.46

-5.81

-10.96

-7.80

-6.09

-10.70

-7.12

-5.54 PEAK GAIN

(dBi) XY-H XY--V 2400 MHz 2450 MHz 2500 MHz

-5.60

-1.95

-4.98

-1.89

-4.60

-1.67 Confidential 7/16/2002 Page:4 VSWR For Left Antenna CABLE-ME 2.4 GHz = 1.662 2.45 GHz = 1.162 2.5 GHz = 1.844 Cable Length = 495mm Confidential 7/16/2002 Page:5 CABLE-ME XY Plane Radiation Pattern For Right Antenna

( 2.4 ~ 2.5 GHz ) HORIZONTAL POLARIZATION VERTICAL POLARIZATION Confidential 7/16/2002 Page:6 CABLE-ME Average Gain For Right Antenna

(dBi) XY-H XY--V Average Gain 2400 MHz 2450 MHz 2500 MHz

-11.19

-9.80

-7.43

-11.66

-9.86

-7.66

-10.02

-8.74

-6.32 PEAK GAIN

(dBi) XY-H XY--V 2400 MHz 2450 MHz 2500 MHz

-2.16

-2.72

-2.29

-3.44

-1.35

-3.71 Confidential 7/16/2002 Page:7

AMBIT AMBIT Microsystems Corporation AMBIT Microsystems Corporation 5F-1, 5 Hsin-An Road, Hsinchu Tai Branch: 10F,100-1 Min-Chuan Road Science-Based Industrial Park, Taiwan n, Taiwan, R.O.C. TEL:+886-3-5784975 TEL:+886-2-2218 9800 FAX:+886-3-5775100 FAX:+886-2-8667 1784 Date: 20. June , 2002 Declaration Letter We, Ambit Microsystems Corp. manufacture Ambit Model P/N: T60H424 We declare that the change for new T60H424 case is only Antenna change , but the module is keep the same design . Thank you for your help. Palin Lan Peter Lan R&D Assistant manager Ambit Microsystems Corp.

EXHIBIT B - TEST SETUP PHOTOGRAPHS Conducted Emission Radiated Emission

NEC NEC NEC NEC

=2400MHz

=2400MHz

=2400MHz

=2400MHz X-Y Y-Z Z-X

=2442MHz

=2442MHz

=2442MHz

=2442MHz X-Y Y-Z Z-X

=2484MHz

=2484MHz

=2484MHz

=2484MHz X-Y Y-Z Z-X

: LAN

:

LAN

:

:

LAN LAN

:

: YCE-5207 YCE-5207

:

:

YCE-5207 YCE-5207

:

:

:

:

:

PARALLEL1.5nH

: PARALLEL1.5nH

:

:

PARALLEL1.5nH PARALLEL1.5nH

: 3

: 2001/11/22

: MC

[dBi]

[dBi]

[dBi]

[dBi]

3.34

-4.80

-6.15 2.60

-1.46

-4.91

-3.13

-9.51

-13.22

-1.63

-9.19

-10.55

-5.2

-4.3

-9.8 X-Y [dBi]

Y-Z [dBi]

-5.9 Z-X [dBi]

[dBi]

VSWR VSWR VSWR VSWR

-6.0

-5.1

-10.5

-6.7

[dBi]

[dBi]

[dBi]

[dBi]

2.13

-5.28

-6.53 1.74

-2.06

-6.28

-4.04

-10.14

-14.05

-2.47

-9.96

-11.70

-6.1

-5.2

-10.7

-6.8

[dBi]

[dBi]

[dBi]

[dBi]

1.08

-4.61

-7.67 1.01

-2.25

-6.92

-4.90

-10.66

-15.21

-3.12

-10.01

-12.51

-6.9

-5.9

-11.1

-7.4 370-24951112TEL 0274-62-2127FAX 0274-62-2031 2001/7/191/3 4m Tx:W ridged horn Antenna 2.5m DUT ZZZZ YYYY XXXX 370-24951112TEL 0274-62-2127FAX 0274-62-2031 X-Y X-Y X-Y X-Y NECBT-1011121012 YCE-5207 011121 X-Y

[Deg]

0 5.0

-90

-5.0

-15.0

-25.0

-35.0

-45.0 180

[Deg]

0 5.0

-5.0

-15.0

-25.0

-35.0

-45.0 All AVG. All MAX. AVG.

-6.02[dBi]

0.03[dBi]

90 Y

-90 X 0 5.0

[Deg]

90

-5.0

-15.0

-25.0

-35.0

-45.0 180

[Deg]

0 5.0

-5.0

-15.0

-25.0

-35.0

-45.0

-90 90

-90 90 180 180 Line No. Frequency[MHz]

MEMO MAX. Gain[dBi]

AVG. Gain[dBi]

1 2 3 4 5 6 2400.00 2400.00 2442.00 2442.00 2484.00 2484.00 Tx-H Tx-V Tx-H Tx-V Tx-H Tx-V 3.34

-4.80 2.13

-5.28 1.08

-4.61

-3.13

-9.51

-4.04

-10.14

-4.90

-10.66 2001/7/192/3 Y-Z Y-Z Y-Z Y-Z NECBT-1011121010 YCE-5207 011121 Y-Z

[Deg]

0 5.0

-5.0

-15.0

-25.0

-35.0

-45.0

-90 90

-90 180

[Deg]

0 5.0

-5.0

-15.0

-25.0

-35.0

-45.0 All AVG. All MAX. AVG.

-5.09[dBi]

-0.61[dBi]

Y

[Deg]

0 5.0

-5.0

-15.0

-25.0

-35.0

-45.0 180

[Deg]

0 5.0

-5.0

-15.0

-25.0

-35.0

-45.0 Z-X Z-X Z-X Z-X NECBT-1011121008 YCE-5207 011121 Z-X

[Deg]

0 5.0 Z 90

-90

-5.0

-15.0

-25.0

-35.0

-45.0 180

[Deg]

0 5.0

-5.0

-15.0

-25.0

-35.0

-45.0 All AVG. All MAX. AVG.

-10.51[dBi]

-3.48[dBi]

90 X

-90 90 Z

[Deg]

0 5.0

-5.0

-15.0

-25.0

-35.0

-45.0 180

[Deg]

0 5.0

-5.0

-15.0

-25.0

-35.0

-45.0

-90 90

-90 90

-90 90

-90 90 180 180 180 180 Line No. Frequency[MHz]

MEMO MAX. Gain[dBi]

AVG. Gain[dBi]

Line No. Frequency[MHz]

MEMO MAX. Gain[dBi]

AVG. Gain[dBi]

1 2 3 4 5 6 2400.00 2400.00 2442.00 2442.00 2484.00 2484.00 Tx-H Tx-V Tx-H Tx-V Tx-H Tx-V

-6.15 2.60

-6.53 1.74

-7.67 1.01

-13.22

-1.63

-14.05

-2.47

-15.21

-3.12 1 2 3 4 5 6 2400.00 2400.00 2442.00 2442.00 2484.00 2484.00 Tx-H Tx-V Tx-H Tx-V Tx-H Tx-V 370-24951112TEL 0274-62-2127FAX 0274-62-2031

-1.46

-4.91

-2.06

-6.28

-2.25

-6.92

-9.19

-10.55

-9.96

-11.70

-10.01

-12.51 2001/7/193/3

AMBIT AMBIT Microsystems Corporation Taipei Branch: 4-1 Ming-Sheng St., Tu-Cheng Industrial Area, Taiwan, R.O.C. TEL:+886-2-2267 6511 FAX:+886-2-2267 6512 Statement Date:5/31/2002 We, Ambit declare that the difference between the old and the new T60H424 is only the antenna. We add the additional antenna for the new T60H424 case. The hardware and the software of T60H424 RF module are kept the same and no change. If you have any problem, please feel free to contact me. Thank you Regards toy Lair Peter Lan R&D Assistant Manager Ambit Microsystems Corp.