FCC ID: B944965AGN Intel Wireless WiFi Link 4965AGN

by: HP Inc. latest update: 2007-07-03 model: 4965AGN

Fifteen grants have been issued under this FCC ID from 12/19/2006 to 07/03/2007 (this is one of fifty-three releases in 2007 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked password defaults, drivers, troubleshooting guides, instructions, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various Manual 434155 Users Manual pdf 281.04 KiB December 04 2007
various Manual 435748 Users Manual pdf 2.50 MiB December 04 2007
various Manual 435751 Users Manual pdf 526.94 KiB December 04 2007
various Manual 435813 Users Manual pdf 526.12 KiB December 04 2007
various Manual 435816 Users Manual pdf 2.60 MiB December 04 2007
various Notebook Regulatory Guide Users Manual pdf 1.90 MiB March 07 2007
various Regulatory Manual Users Manual pdf 1.84 MiB December 04 2007
various User Manual Users Manual pdf 3.53 MiB March 07 2007
various Users Manual Users Manual pdf 3.00 MiB November 12 2006
various Users Manual 1 Users Manual pdf 3.22 MiB
various Users Manual 2 Users Manual pdf 488.35 KiB
various Operational Description pdf March 07 2007
various RF Exposure Info pdf March 07 2007
various RF Exposure Info pdf March 07 2007
various EXternal Photos External Photos pdf 1.15 MiB March 07 2007
various Internal Photos Internal Photos pdf 3.39 MiB March 07 2007
various ID Label/Location Info pdf March 07 2007
various Cover Letter(s) pdf March 07 2007
various RF Exposure Info pdf March 07 2007
various RF Exposure Info pdf March 07 2007
various RF Exposure Info pdf March 07 2007
various RF Exposure Info pdf March 07 2007
various RF Exposure Info pdf March 07 2007
various Test Report pdf March 07 2007
various Test Report pdf March 07 2007
various Test Setup Photos pdf March 07 2007
various RF Exposure Info pdf March 07 2007
various RF Exposure Info pdf March 07 2007
various Test Report pdf March 07 2007
various Test Report pdf March 07 2007
various Test Report pdf March 07 2007
various Attestation Statements pdf October 05 2007
various Cover Letter(s) pdf October 05 2007
various Cover Letter(s) pdf
various Cover Letter(s) pdf October 05 2007
various Cover Letter(s) pdf October 05 2007
various Parts List/Tune Up Info pdf December 04 2007
various Parts List/Tune Up Info pdf December 04 2007
various Cover Letter(s) pdf December 04 2007
various RF Exposure Info pdf December 04 2007
various Parts List/Tune Up Info pdf
various Parts List/Tune Up Info pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Attestation Statements pdf
various ID Label/Location Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Report pdf
various Parts List/Tune Up Info pdf
various Test Report pdf June 02 2007
various Test Report pdf June 02 2007
various Cover Letter(s) pdf November 12 2006
various Test Report pdf November 12 2006
various Cover Letter(s) pdf November 12 2006
various Manual 434155 Users Manual pdf 281.04 KiB December 04 2007
various Manual 435748 Users Manual pdf 2.50 MiB December 04 2007
various Manual 435751 Users Manual pdf 526.94 KiB December 04 2007
various Manual 435813 Users Manual pdf 526.12 KiB December 04 2007
various Manual 435816 Users Manual pdf 2.60 MiB December 04 2007
various Notebook Regulatory Guide Users Manual pdf 1.90 MiB March 07 2007
various Regulatory Manual Users Manual pdf 1.84 MiB December 04 2007
various User Manual Users Manual pdf 3.53 MiB March 07 2007
various Users Manual Users Manual pdf 3.00 MiB November 12 2006
various Users Manual 1 Users Manual pdf 3.22 MiB
various Users Manual 2 Users Manual pdf 488.35 KiB
various EXternal Photos External Photos pdf 1.15 MiB March 07 2007
various Internal Photos Internal Photos pdf 3.39 MiB March 07 2007

frequency equipment class purpose
1 2007-07-03 5260 ~ 5320 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 5745 ~ 5825 DTS - Digital Transmission System
3 2007-05-31 5260 ~ 5320 NII - Unlicensed National Information Infrastructure TX
4 5745 ~ 5825 DTS - Digital Transmission System
5 2007-04-12 5260 ~ 5320 NII - Unlicensed National Information Infrastructure TX
6 5745 ~ 5825 DTS - Digital Transmission System
7 2007-03-15 5745 ~ 5825 DTS - Digital Transmission System
8 5260 ~ 5320 NII - Unlicensed National Information Infrastructure TX
9 5745 ~ 5825 DTS - Digital Transmission System
10 5260 ~ 5320 NII - Unlicensed National Information Infrastructure TX
11 2006-12-22 2412 ~ 2462 DTS - Digital Transmission System
12 5180 ~ 5240 NII - Unlicensed National Information Infrastructure TX
13 2006-12-19 JBP - Part 15 Class B Computing Device Peripheral Original Equipment
14 5180 ~ 5240 NII - Unlicensed National Information Infrastructure TX
15 2412 ~ 2462 DTS - Digital Transmission System

Application Forms

app s Applicant Information
various Effective 2007-07-03
various 2007-05-31
various 2007-04-12
various 2007-03-15
various 2006-12-22
various 2006-12-19
various Applicant's complete, legal business name HP Inc.
various FCC Registration Number (FRN) 0025126541
various Physical Address 3390 East Harmony Road
various Fort Collins, CO
various United States
app s TCB Information
various TCB Application Email Address j******@ict.cetecom.de
various H******@atcb.com
various m******@ccsemc.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code B94
various Equipment Product Code 4965AGN
app s Person at the applicant's address to receive grant or for contact
various Name R**** P******** T******
various Title US Canada Technical Regulations
various Telephone Number 970-8********
various Fax Number 000-0********
various E-mail r******@hp.com
app s Technical Contact
various Firm Name Aegis Labs, Inc.
various Name J******** C********
various Physical Address 23091 Antonio Parkway #B160-417
various Rancho Santa Margarita, California 92630
various Rancho Santa Margarita, California 92688
various United States
various Telephone Number 949 4********
various 949-4********
various Fax Number 949 4********
various 949-4********
various 949-5********
various E-mail j******@aegislabsinc.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
variousYes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Wireless WiFi Link 4965AGN
variousClass B Computing Device Peripheral
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsClass II Permissive Change to allow portable configuration in specific host as described in this filling. Power Output listed is Aggregate Conducted. Modular approval. The final host device must utilize the BIOS Locking feature as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150 MHz to 5250 MHz frequency range. For operation in mobile RF exposure conditions, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.537 W/kg; 5.2 GHz-band 0.717 W/kg; 5.8 GHz-band 0.618 W/kg. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.
variousClass II Permissive Change to allow portable configuration in specific host as described in this filling. Power Output listed is Aggregate Conducted. Modular approval. The final host device must utilize the BIOS Locking feature as documented in this filing. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. For operation in mobile RF exposure conditions, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.537 W/kg; 5.2 GHz-band 0.717 W/kg; 5.8 GHz-band 0.618 W/kg. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
variousPower Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. The final host device must utilize the BIOS Locking feature as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150 MHz to 5250 MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID. Class II Permissive Changes have evaluated co-location with specific WWAN modules as documented in applications under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.
variousPower Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. The final host device must utilize the BIOS Locking feature as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID. Class II Permissive Changes have evaluated co-location with specific WWAN modules as documented in applications under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containinga 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
variousClass II permissve change to be co-located with specific WWAN module as documented in the filing. Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.
variousClass II permissve change to be co-located with specific WWAN module as documented in the filing. Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
variousPower Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
variousPower Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.
variousPower Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.
variousPower Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name CETECOM Inc.
various AEGIS Labs, Inc.
various Compliance Certification Services
various Name K**** L********
various S******** K****
various T**** C******
various Telephone Number 408-5********
various 949-4******** Extension:
various 510-7********
various Fax Number 408-5********
various 94982********
various 510-6********
various E-mail k******@cetecom.com
various s******@aegislabsinc.com
various t******@ccsemc.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.05
1 2 15E CC MO 5260 5320 0.123
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC MO 2412 2462 0.46
2 2 15C CC MO 5745 5825 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC MO 5180 5240 0.05
3 2 15E CC MO 5260 5320 0.123
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC MO 2412 2462 0.46
4 2 15C CC MO 5745 5825 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5180 5240 0.05
5 2 15E CC MO 5260 5320 0.123
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC MO 2412 2462 0.46
6 2 15C CC MO 5745 5825 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC MO 2412 2462 0.46
7 2 15C CC MO 5745 5825 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E CC MO 5180 5240 0.05
8 2 15E CC MO 5260 5320 0.123
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC MO 2412 2462 0.46
9 2 15C CC MO 5745 5825 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E CC MO 5180 5240 0.05
10 2 15E CC MO 5260 5320 0.123
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC MO 2412 2462 0.46
11 2 15C CC MO 5745 5825 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E CC MO 5180 5240 0.05
12 2 15E CC MO 5260 5320 0.123
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15B
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E CC MO 5180 5240 0.05
14 2 15E CC MO 5260 5320 0.123
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC MO 2412 2462 0.46
15 2 15C CC MO 5745 5825 0.303

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC