Safety & Regulatory Guide for [HSC-L03WC Wireless Charger Module]. Product NameWireless Charger Module Brand Name hp Type NumberHSC-L03WC Input12Vdc 2A Output:15W Max. It is a 15W WPC wireless charger module for charging a single phone or phablet. Wireless charger is built into the base of select HP AIO or PC base unit All-in-One computers. Place any Qi-enabled device on the base for charging. Troubleshooting charging issues If the wireless charging feature does not work as expected, verify the following:
Make sure that your mobile device is capable of wireless charging. See the product specifications of your mobile device. Make sure that your mobile device is placed correctly on the base . This booklet provides important safety, regulatory information that you should read before you start using your [HCS-L03WC Wireless Charger]
To avoid damaging your device, accessories or any connected devices, and to reduce the risk of personal injury, discomfort, property damage or other potential hazards, follow these precautions below :
Handle your [HSC-L03WC Wireless Charger Module] with care. You may damage the device if you disassemble, drop, bend, burn, crush or puncture your device. Using a damaged device may cause overheating or injury. Dont expose your [HCS-L03WC Wireless Charger Module] to liquids, which can cause a short circuit and overheating. The [HSC-L03WC Wireless Charger Module] is designed to work best in ambient temperatures between 0 and 40 C. Maintain a distance of 10 cm from your body to be consistent with how the device is tested for compliance with RF exposure requirements. Hereby, HP Inc. declares that the radio equipment type HSC-L03WC is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.hp.com/go/orderdocuments Hereby, HP Inc. declares that the radio equipment type HSC-L03WC is in compliance with RER 2017 (SI 2017/1206). The full text of the UK declaration of conformity is available at the following internet address: http://www.hp.com/go/orderdocuments In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU,UK:
Frequency range Output power WPC 120-130kHz RF Exposure Information (MPE)
< 0 dBuA/m@10m This device meets the EU requirements and the International Commission on Non-
Ionizing Radiation Protection (ICNIRP) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. Waste Electrical and Electronic Equipment (WEEE) & Batteries Directive
[or]
The WEEE symbol above means that according to local laws and regulations your product
[and its battery] must be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities for safe disposal or recycling. The separate collection and recycling of your product and its battery will help conserve natural resources, protects human health, and help the environment. EMC Compliance Important: This device and power adapter have demonstrated Electromagnetic Compatibility
(EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. Changes or modifications to this product not authorized by hp could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product. Regulatory Information: United States FCC REGULATORY COMPLIANCE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by hp could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:
1 These devices may not cause harmful interference. 2 These devices must accept any interference received, including interference that may cause undesired operation. Maintain a distance of 20 cm (8 inches) from your body to be consistent with how the device is tested for compliance with RF exposure requirements. FCC ID: B94HCL03WC EMC COMPLIANCE STATEMENT Important: This device [and its power adapter] have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. RADIO FREQUENCY EXPOSURE This device meets the U.S. Federal Communications Commissions (FCC) requirements for exposure to radio waves and is designed and manufactured not to exceed the FCCs emission limits for exposure to radiofrequency (RF) energy. To comply with FCC RF exposure compliance requirements, this device must not be co-
located or operating in conjunction with any other antenna or transmitter. Innovation, Science and Economic Development (ISED) Canada Regulatory Compliance IC: 466X-HCL03WC INDUSTRY CANADA, CLASS B This Class B digital apparatus complies with CAN ICES-003(B)/NMB-003(B). Innovation, Science and Economic Development Canada (ISED Canada)/Innovation, Sciences et Dveloppement conomique Canada Industry Canada/Industrie This device complies with ISEDs licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISED Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Radio Frequency Exposure/Exposition aux radiofrquences The output power of the radio technology used in the Device is below the radio frequency exposure limits set by ISED for an uncontrolled environment. Maintain a distance of 10 cm from your body to be consistent with how the device is tested for compliance with RF exposure requirements. La puissance de sortie de la technologie radio utilise dans le priphrique est infrieure aux limites d'exposition aux frquences radio dfinies par ISED Canada pour un environnement non contrl. Maintenez une distance de 10 cm de votre corps pour tre cohrent avec la faon dont lappareil est test pour la conformit aux exigences dexposition RF. NCC To access the latest user guide, go to http://www.hp.com/support, and select your country. Select Drivers & Downloads, and then follow the on-screen instructions.
*You can find the expressly provided HP Limited Warranty applicable to your product located with the user guides on your tablet and/or on the CD/DVD provided in the box. In some countries/regions, HP may provide a printed HP Limited Warranty in the box. For countries/regions where the warranty is not provided in printed format, you may request a printed copy from http://www.hp.com/go/orderdocuments or write to:
North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd., Boise, ID 83714, USA Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507 When you request a printed copy of your warranty, please include your product number, warranty period (found on your service label), name, and postal address. IMPORTANT: Do NOT return your HP product to the addresses above. For U.S. support, go to http://www.hp.com/go/ contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html.