app
s
|
Applicant Information
|
|
various
|
Effective |
2024-03-11
|
various
|
2024-03-08
|
various
|
2024-02-26
|
various
|
2024-02-23
|
various
|
2024-02-20
|
various
|
2024-02-16
|
various
|
2024-02-15
|
various
|
2024-02-08
|
various
|
2024-02-01
|
various
|
2024-01-24
|
various
|
2024-01-12
|
various
|
2024-01-05
|
various
|
2024-01-03
|
various
|
2023-12-21
|
various
|
2023-12-17
|
various
|
2023-12-13
|
various
|
2023-12-10
|
various
|
2023-11-29
|
various
|
2023-11-27
|
various
|
2023-11-23
|
various
|
2023-10-16
|
various
|
2023-09-13
|
various
|
2023-09-10
|
various
|
2023-08-14
|
various
|
2023-05-31
|
various
|
2023-05-30
|
various
|
2023-05-24
|
various
|
2023-05-19
|
various
|
2023-05-10
|
various
|
2023-04-21
|
various
|
2023-04-03
|
various
|
2023-03-31
|
various
|
2023-03-29
|
various
|
2023-03-27
|
various
|
2023-03-24
|
various
|
2023-03-22
|
various
|
2023-03-20
|
various
|
2023-03-17
|
various
|
2023-03-16
|
various
|
2023-03-15
|
various
|
2023-03-09
|
various
|
2023-03-07
|
various
|
2023-03-06
|
various
|
2023-03-04
|
various
|
2023-03-03
|
various
|
2023-03-02
|
various
|
2023-02-27
|
various
|
2023-02-15
|
various
|
2023-02-14
|
various
|
2023-02-13
|
various
|
2023-02-12
|
various
|
2023-02-10
|
various
|
2023-02-09
|
various
|
2023-02-08
|
various
|
2023-02-07
|
various
|
2023-02-03
|
various
|
2023-02-01
|
various
|
2023-01-30
|
various
|
2023-01-19
|
various
|
2023-01-17
|
various
|
2023-01-10
|
various
|
2023-01-09
|
various
|
2023-01-06
|
various
|
2023-01-05
|
various
|
2023-01-03
|
various
|
2022-11-18
|
various
|
2022-08-29
|
various
|
2022-08-23
|
various
|
2022-07-04
|
various
|
2022-07-01
|
various
|
2022-06-30
|
various
|
2022-06-02
|
various
|
2022-05-20
|
various
|
2022-05-17
|
various
|
2022-05-16
|
various
|
2022-05-11
|
various
|
2022-04-28
|
various
|
2022-04-22
|
various
|
2022-04-19
|
various
|
2022-04-18
|
various
|
2022-04-13
|
various
|
2022-04-11
|
various
|
2022-04-06
|
various
|
2022-03-29
|
various
|
2022-03-28
|
various
|
2022-03-25
|
various
|
2022-03-23
|
various
|
2022-03-21
|
various
|
2022-03-16
|
various
|
2022-03-11
|
various
|
2022-03-09
|
various
|
2022-03-08
|
various
|
2022-03-07
|
various
|
2022-03-04
|
various
|
2022-03-03
|
various
|
2022-02-28
|
various
|
2022-01-31
|
various
|
2022-01-26
|
various
|
2022-01-25
|
various
|
2022-01-20
|
various
|
2022-01-14
|
various
|
2021-12-22
|
various
|
2021-12-17
|
various
|
2021-12-10
|
various
|
2021-11-30
|
various
|
2021-11-03
|
various
|
2021-10-28
|
various
|
2021-09-02
|
various
|
2021-08-31
|
various
|
2021-07-01
|
various
|
2021-06-28
|
various
|
2021-04-26
|
various
|
2021-02-17
|
various
|
Applicant's complete, legal business name |
Intel Corporation
|
various
|
FCC Registration Number (FRN) |
0033159344
|
various
|
0008035131
|
various
|
Physical Address |
425 rue de Goa Le Cargo B6
|
various
|
100 Center Point Circle Suite 200
|
various
|
425 rue de Goa
|
various
|
100 Center Point Circle
|
various
|
Antibes, N/A
|
various
|
Antibes, N/A 06600
|
various
|
Columbia, SC
|
various
|
Columbia, South Carolina 29210
|
various
|
Columbia
|
various
|
France
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
Q******@sporton-usa.com
|
various
|
M******@sporton-usa.com
|
various
|
h******@acbcert.com
|
various
|
K******@sporton-usa.com
|
various
|
b******@intel.com
|
various
|
K******@sporton-usa.com
|
various
|
h******@ACBcert.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
PD9
|
various
|
Equipment Product Code |
AX211NG
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
B******** L******
|
various
|
S**** C****** H********
|
various
|
Title |
Regulatory Engineer
|
various
|
Product Regulations Engineer
|
various
|
Telephone Number |
04930********
|
various
|
803-3********
|
various
|
Fax Number |
04930********
|
various
|
803-2********
|
various
|
E-mail |
b******@intel.com
|
various
|
s******@intel.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Intel Corporation
|
various
|
Intel Mobile Communications
|
various
|
Name |
B****** L******
|
various
|
S**** C**** H******
|
various
|
S****** H******
|
various
|
Physical Address |
425 rue de Goa
|
various
|
100 Center Point Circle
|
various
|
100 center Point Circle
|
various
|
100 Center Point Circle Suite 200
|
various
|
100 Center Point Circle Sute 200
|
various
|
Columbia
|
various
|
Antibes, 06600
|
various
|
Columbia, 29212
|
various
|
Columbia, 29210
|
various
|
Columbia, South Carolina 29210
|
various
|
29210
|
various
|
Columbia, South Carolina
|
various
|
France
|
various
|
United States
|
various
|
Telephone Number |
+3349********
|
various
|
04930********
|
various
|
80321********
|
various
|
80331********
|
various
|
98032********
|
various
|
E-mail |
b******@intel.com
|
various
|
s******@intel.com
|
various
|
g******@intel.com
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
Intel Corporation
|
various
|
Name |
B******** L********
|
various
|
G****** C****
|
various
|
G****** C****** C********
|
various
|
Physical Address |
425 rue de Goa
|
various
|
Antibes, 06600
|
various
|
Antibes, 29212
|
various
|
Antibes, 0
|
various
|
Antebes, 06600
|
various
|
France
|
various
|
United States
|
various
|
Telephone Number |
+3349********
|
various
|
04930********
|
various
|
80321********
|
various
|
33493********
|
various
|
E-mail |
b******@intel.com
|
various
|
g******@intel.com
|
various
|
B******@intel.com
|
various
|
g******@catala@intel.com
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/07/2024 |
various | 09/05/2024 |
various | 08/25/2024 |
various | 08/22/2024 |
various | 08/19/2024 |
various | 08/14/2024 |
various | 08/07/2024 |
various | 07/31/2024 |
various | 07/21/2024 |
various | 07/11/2024 |
various | 07/03/2024 |
various | 07/02/2024 |
various | 06/19/2024 |
various | 06/15/2024 |
various | 06/11/2024 |
various | 06/08/2024 |
various | 05/28/2024 |
various | 05/26/2024 |
various | 05/22/2024 |
various | 04/13/2024 |
various | 03/12/2024 |
various | 03/08/2024 |
various | 11/28/2023 |
various | 11/27/2023 |
various | 11/20/2023 |
various | 11/15/2023 |
various | 11/16/2023 |
various | 10/19/2023 |
various | 09/30/2023 |
various | 09/27/2023 |
various | 09/25/2023 |
various | 09/23/2023 |
various | 09/20/2023 |
various | 09/19/2023 |
various | 09/16/2023 |
various | 09/13/2023 |
various | 09/12/2023 |
various | 09/11/2023 |
various | 09/06/2023 |
various | 09/04/2023 |
various | 09/02/2023 |
various | 09/01/2023 |
various | 08/31/2023 |
various | 08/30/2023 |
various | 08/13/2023 |
various | 08/14/2023 |
various | 08/12/2023 |
various | 08/10/2023 |
various | 08/07/2023 |
various | 08/03/2023 |
various | 07/31/2023 |
various | 07/18/2023 |
various | 07/10/2023 |
various | 07/09/2023 |
various | 07/06/2023 |
various | 07/05/2023 |
various | 04/29/2023 |
various | 05/06/2023 |
various | 01/01/2023 |
various | 12/27/2022 |
various | 11/29/2022 |
various | 11/26/2022 |
various | 11/28/2022 |
various | 11/16/2022 |
various | 11/13/2022 |
various | 11/12/2022 |
various | 11/07/2022 |
various | 10/25/2022 |
various | 10/18/2022 |
various | 10/16/2022 |
various | 10/15/2022 |
various | 10/10/2022 |
various | 10/08/2022 |
various | 10/03/2022 |
various | 09/25/2022 |
various | 09/24/2022 |
various | 09/21/2022 |
various | 09/19/2022 |
various | 09/17/2022 |
various | 09/12/2022 |
various | 09/07/2022 |
various | 09/05/2022 |
various | 09/04/2022 |
various | 09/03/2022 |
various | 08/31/2022 |
various | 08/30/2022 |
various | 08/29/2022 |
various | 08/27/2022 |
various | 07/30/2022 |
various | 07/25/2022 |
various | 07/24/2022 |
various | 07/19/2022 |
various | 07/12/2022 |
various | 06/18/2022 |
various | 06/20/2022 |
various | 06/14/2022 |
various | 06/08/2022 |
various | 05/28/2022 |
various | 05/02/2022 |
various | 04/25/2022 |
various | 03/01/2022 |
various | 02/27/2022 |
various | 12/28/2021 |
various | 12/16/2021 |
various | 12/25/2021 |
various | 10/16/2021 |
various | 08/15/2021 |
various | 08/10/2021 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
various | 6XD - 15E 6 GHz Low Power Indoor Client |
various | DTS - Digital Transmission System |
various | NII - Unlicensed National Information Infrastructure TX |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Wi-Fi 6E AX211 |
various | Intel AX211 |
various | Intel Wi-Fi 6 AX211 |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Yes |
various | Modular Equipment Type | Single Modular Approval |
various | Does not apply |
various | Purpose / Application is for | Class II Permissive Change |
various | Class II permissive change or modification of presently authorized equipment |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Dell model P132F Notebook PC. The highest reported Body and Simultaneous SAR values are 0.22 W/kg and 1.30 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Dell model P132F Notebook PC. The highest reported Body and Simultaneous SAR values are 1.08 W/kg and 1.30 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Dell model P132F Notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.21 W/kg respectively. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Dell model P132F Notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.51 W/kg and 1.26 W/kg respectively. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-W157 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.49 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the HP model TPN-W157 convertible PC. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.46 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-W157 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.54 W/kg and 1.07 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-W157 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.49 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 2-in-1 G4 IML convertible PC. The highest reported Body and Simultaneous SAR values are 1.18 W/kg and 1.45 W/kg respectively. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 2-in-1 G4 IML convertible PC. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.46 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 2-in-1 G4 IML convertible PC. The highest reported Body and Simultaneous SAR values are 0.27 W/kg and 1.46 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 2-in-1 G4 IML convertible PC. The highest reported Body and Simultaneous SAR values are 1.50 W/kg and 1.51 W/kg respectively. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
This change establishes portable category SAR conditions for the Dell model P186G convertible PC. The highest reported Body and Simultaneous SAR values are 1.20 W/kg and 1.26 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Dell model P186G convertible PC. The highest reported Body and Simultaneous SAR values are 0.80 W/kg and 1.33 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P186G convertible PC. The highest reported Body and Simultaneous SAR values are 0.47 W/kg and 0.84 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P186G convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.26 W/kg respectively. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-C176 Notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.56 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the HP model TPN-C176 Notebook PC. The highest reported Body and Simultaneous SAR values are 0.32 W/kg and 0.57 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-C176 Notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.32 W/kg and 0.59 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-C176 Notebook PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.56 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.41W/kg and 0.78W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I61C.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.32W/kg and 0.78W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I61C.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.78 W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I61C.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 0.78W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I61C.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-C174 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.27 W/kg respectively. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-C174 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.27 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the HP model TPN-C174 convertible PC. The highest reported Body and Simultaneous SAR values are 0.56 W/kg and 1.08 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-C174 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.24 W/kg respectively. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-C172 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 1.20 W/kg and 1.26 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the HP model TPN-C172 convertible PC. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.49 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-C172 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.49 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-C172 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.91 W/kg and 0.91 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Dell model P133F convertible PC. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.06 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Dell model P133F convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.68 W/kg and 1.18 W/kg respectively. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Dell model P133F convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.56 W/kg and 1.16 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Dell model P133F convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.16 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P182G with Wistron
antenna Part number 0772W9 and 08V97D with TAS implemented in DTS and UNII-1 to UNII-4 Bands.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was
performed to demonstrate RF compliance. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P182G with Wistron antenna Part number 0772W9 and 08V97D with TAS implemented in DTS and UNII-1 to UNII-4 Bands.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P182G with Wistron antenna Part number 0772W9 and 08V97D with TAS implemented in DTS and UNII-1 to UNII-4 Bands.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.59 W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P182G with Wistron antenna Part number 0772W9 and 08V97D with TAS implemented in DTS and UNII-1 to UNII-4 Bands.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad 5 2-in-1 14IRU9 convertible PC. The highest reported Body and Simultaneous SAR values are 1.20 W/kg and 1.27 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad 5 2-in-1 16IRU9 convertible PC. The highest reported Body and Simultaneous SAR values are 0.11 W/kg and 1.10 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad 5 2-in-1 14IRU9 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.27 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad 5 2-in-1 16IRU9 convertible PC. The highest reported Body and Simultaneous SAR values are 0.99 W/kg and 1.10 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad 5 2-in-1 14IRU9 convertible PC. The highest reported Body and Simultaneous SAR values are 1.08 W/kg and 1.15 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad 5 2-in-1 16IRU9 convertible PC. The highest reported Body and Simultaneous SAR values are 0.90 W/kg and 1.57 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad 5 2-in-1 14IRU9 convertible PC. The highest reported Body and Simultaneous SAR values are 0.96 W/kg and 1.50 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad 5 2-in-1 16IRU9 convertible PC. The highest reported Body and Simultaneous SAR values are 1.01 W/kg and 1.03 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08/kg and 1.15W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I46C convertible PC with PIFA antennas part number 6036B0350401 (81EAB815.G21) and 6036B0350501(81EAB815.G22).
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.52W/kg and 1.15W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I46C convertible PC with PIFA antennas part number 6036B0350401 (81EAB815.G21) and 6036B0350501(81EAB815.G22).
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.07 W/kg and 1.15 W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I46C convertible PC with PIFA antennas part number 6036B0350401 (81EAB815.G21) and 6036B0350501(81EAB815.G22).
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.26W/kg and 1.15W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I46C convertible PC with PIFA antennas part number 6036B0350401 (81EAB815.G21) and 6036B0350501(81EAB815.G22).
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-W157 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 1.00 W/kg and 1.08 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-W157 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.70 W/kg and 1.37 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the HP model TPN-W157 convertible PC. The highest reported Body and Simultaneous SAR values are 0.65 W/kg and 1.20 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-W157 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.20 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-W156 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.49 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-W156 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.54 W/kg and 1.07 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the HP model TPN-W156 convertible PC. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.46 W/kg respectively. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the HP model TPN-W156 convertible PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.49 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Dell model P132F notebook PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.38 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Dell model P132F notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.86 W/kg and 1.45 W/kg respectively. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Dell model P132F notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.60 W/kg and 1.16 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Dell model P132F notebook PC. The highest reported Body and Simultaneous SAR values are 0.71 W/kg and 1.38 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G6+ IMH notebook PC. The highest reported Body and Simultaneous SAR values are 0.10 W/kg and 1.29 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G6+ IMH notebook PC. The highest reported Body and Simultaneous SAR values are 0.70 W/kg and 1.31 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G6+ IMH notebook PC. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.60 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G6+ IMH notebook PC. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.22 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Dell model P187G notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 0.85 W/kg and 1.21 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Dell model P187G notebook PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.17 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This C2PC establishes portable category SAR conditions for the Dell model P187G notebook PC. The highest reported Body and Simultaneous SAR values are 1.08 W/kg and 1.13 W/kg respectively. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC establishes portable category SAR conditions for the Dell model P187G notebook PC. The WLAN TAS feature is enabled in 2.4GHz and 5GHz bands. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.50 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the HP model TPN-Q296 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.15 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the HP model TPN-Q296 convertible PC. The highest reported Body and Simultaneous SAR values are 0.48 W/kg and 0.84 W/kg respectively. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the HP model TPN-Q296 convertible PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.15 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the HP model TPN-Q296 convertible PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 0.87 W/kg respectively. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the HP model TPN-Q295 notebook PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.31 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the HP model TPN-Q295 notebook PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.11 W/kg and 1.23 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the HP model TPN-Q295 notebook PC. The highest reported Body and Simultaneous SAR values are 0.12 W/kg and 1.31 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the HP model TPN-Q295 notebook PC. The highest reported Body and Simultaneous SAR values are 0.47 W/kg and 0.97 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P181G PC. The highest reported Body and Simultaneous SAR values are 0.31 W/kg and 0.47 W/kg respectively.
Class II Permissive Change: WLAN TAS feature activation operating in WLAN 2.4 GHz and WLAN 5 GHz bands for the Dell model P181G PC. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P181G PC. The highest reported Body and Simultaneous SAR values are 0.93 W/kg and 1.29 W/kg respectively.
Class II Permissive Change: WLAN TAS feature activation operating in WLAN 2.4 GHz and WLAN 5 GHz bands for the Dell model P181G PC. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P181G PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.29 W/kg respectively.
Class II Permissive Change: WLAN TAS feature activation operating in WLAN 2.4 GHz and WLAN 5 GHz bands for the Dell model P181G PC. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Dell model P181G PC. The highest reported Body and Simultaneous SAR values are 0.31 W/kg and 0.41 W/kg respectively.
Class II Permissive Change: WLAN TAS feature activation operating in WLAN 2.4 GHz and WLAN 5 GHz bands for the Dell model P181G PC. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations.
For the UNII-1 to UNII-3 band this device has been previously approved for Antenna type: monopole Antenna P/N 260-25083 was tested at 29mm. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.14W/kg respectively. SAR testing has been performed to demonstrate RF compliance for the UNII-1 to UNII-3 bands.
This change is to add a new antenna for a monopole type (Hong-Bo part no. 260-25084 and 260-25083) for the UNII-4 Band. All other hardware remains identical and all antenna gains are equal or less than those approved originally. Use of this antenna meets MPE requirements of KDB447498 and can be used in mobile configurations. Use in portable configurations requires appropriate evaluation and Permissive Change as required by RF exposure procedures. |
various | Power Output listed is conducted. Modular Approval filing. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the HP model TPN-Q293 convertible PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.32 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the HP model TPN-Q293 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.36 W/kg respectively. |
various | Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the HP model TPN-Q293 convertible PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.36 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the HP model TPN-Q293 convertible PC. The highest reported Body and Simultaneous SAR values are 0.69 W/kg and 1.11 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the HP model TPN-Q292 convertible PC. The highest reported Body and Simultaneous SAR values are 0.11 W/kg and 1.49 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the HP model TPN-Q292 convertible PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.01 W/kg and 1.12 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the HP model TPN-Q292 convertible PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.07 W/kg and 1.49 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the HP model TPN-Q292 convertible PC. The highest reported Body and Simultaneous SAR values are 0.80 W/kg and 1.51 W/kg respectively. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations.
Addition of a new antenna and antenna type for the UNII-4 Band. (Antenna type: Dipole Antenna Wieson Part no ARY121-0009-002-H0). |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P128F PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.47 W/kg respectively. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P172G Convertible PC. The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.58 W/kg respectively. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.11W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P125F Notebook PC with SPEED F-0GFS- 6144-001-00 and F-0G-FS-6144-002-00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.86W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P162G Notebook PC with WNC DC33002QV0L and DC33002QV1L antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P171G Notebook PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.06 W/kg respectively. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P117F PC. The highest reported Body and Simultaneous SAR values are 0.69 W/kg and 1.34 W/kg respectively. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P120F PC. The highest reported Body and Simultaneous SAR values are 0.35 W/kg and 0.77 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.57 W/kg and 1.40 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C165 Convertible PC with PIFA antennas, Vendor 1: 48EABP0R, 48EABP0S,
Vendor 2: 219HCTN12274, 219HCTN12275. TAS feature enabled.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.40W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C165 Convertible PC with PIFA antennas, Vendor 1: 48EABP0R, 48EABP0S, Vendor 2: 219HCTN12274, 219HCTN12275. TAS feature enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.40W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C165 Convertible PC with PIFA antennas, Vendor 1: 48EABP0R, 48EABP0S, Vendor 2: 219HCTN12274, 219HCTN12275. TAS feature enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.40W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C165 Convertible PC with PIFA antennas, Vendor 1: 48EABP0R, 48EABP0S, Vendor 2: 219HCTN12274, 219HCTN12275. TAS feature enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.41W/kg respectively.
This modules satisfies conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
This change establishes portable category SAR conditions for the Asus model UX3404V Notebook PC with Innowave F00193213110001 and INPAQ WA-P-LELE-04-039 antennas. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.41W/kg respectively.
This modules satisfies conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
This change establishes portable category SAR conditions for the Asus model UX3404V Notebook PC with Innowave F00193213110001 and INPAQ WA-P-LELE-04-039 antennas. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.34 W/kg and 0.68 W/kg respectively.
This modules satisfies conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Asus model
UX3404V Notebook PC with Innowave F00193213110001 and INPAQ WA-P-LELE-04-039 antennas. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.41W/kg respectively.
This modules satisfies conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
This change establishes portable category SAR conditions for the Asus model UX3404V Notebook PC with Innowave F00193213110001 and INPAQ WA-P-LELE-04-039 antennas. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.86W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P162G Notebook PC with WNC DC33002QV0L and DC33002QV1L antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P162G Notebook PC with WNC DC33002QV0L and DC33002QV1L antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.27W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P162G Notebook PC with WNC DC33002QV0L and DC33002QV1L antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08 W/kg and 1.33 W/kg respectively.
This change establishes portable category SAR conditions for the
Dell model P162G Notebook PC with WNC DC33002QV0L and DC33002QV1L
antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20 W/kg and 1.21 W/kg respectively.
This change establishes portable category SAR conditions for the
HP model TPN-C164 Notebook PC with with PIFA antennas Vendor 1
DC33002SH00 and DC33002SH10 and Vendor 2 81EABP15.G41 and 81EABP15.G42. The WLAN TAS feature is enabled.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.35W/kg and 1.21W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C164 Notebook PC with with PIFA antennas Vendor 1 DC33002SH00 and DC33002SH10 and Vendor 2 81EABP15.G41 and 81EABP15.G42. The WLAN TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.21W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C164 Notebook PC with with PIFA antennas Vendor 1 DC33002SH00 and DC33002SH10 and Vendor 2 81EABP15.G41 and 81EABP15.G42. The WLAN TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.21W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C164 Notebook PC with with PIFA antennas Vendor 1 DC33002SH00 and DC33002SH10 and Vendor 2 81EABP15.G41 and 81EABP15.G42. The WLAN TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.96 W/kg and 1.11 W/kg respectively.
This change establishes portable category SAR conditions for the
Dell model P125F Notebook PC with SPEED F-0G-FS-6144-001-00 and
F-0G-FS-6144-002-00 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.11W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P125F Notebook PC with SPEED F-0G-FS-6144-001-00 and F-0G-FS-6144-002-00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 1.11W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P125F Notebook PC with SPEED F-0G-FS-6144-001-00 and F-0G-FS-6144-002-00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.11W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P125F Notebook PC with SPEED F-0G-FS-6144-001-00 and F-0G-FS-6144-002-00 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P171G Notebook PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.06 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Dell model P171G Notebook PC. The highest reported Body and Simultaneous SAR values are 0.47 W/kg and 0.96 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P171G Notebook PC. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.94 W/kg and 1.58 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P171G Notebook PC. The highest reported Body and Simultaneous SAR values are 0.17 W/kg and 1.11 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.62W/kg and 1.34W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P168G Convertible PC with WNC antenna Part number 81EABW15.G19 and 81EABW15.G20.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.52 W/kg and 1.34 W/kg respectively.
This change establishes portable category SAR conditions for the
Dell model P168G Convertible PC with WNC antenna Part number
81EABW15.G19 and 81EABW15.G20.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.34W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P168G Convertible PC with WNC antenna Part number 81EABW15.G19 and 81EABW15.G20.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.34W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P168G Convertible PC with WNC antenna Part number 81EABW15.G19 and 81EABW15.G20.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 0.89W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P115F Notebook PC with WNC DC33002SL0L and DC33002SL1L antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.48W/kg and 0.89W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P115F Notebook PC with WNC DC33002SL0L and DC33002SL1L antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.42W/kg and 0.89W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P115F Notebook PC with WNC DC33002SL0L and DC33002SL1L antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20 W/kg and 0.89 W/kg respectively.
This change establishes portable category SAR conditions for the
Dell model P115F Notebook PC with WNC DC33002SL0L and DC33002SL1L
antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.29W/kg and 0.75W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P114F Notebook PC with WNC DC33002SK0L and DC33002SK1L antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 0.75W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P114F Notebook PC with WNC DC33002SK0L and DC33002SK1L antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 0.75W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P114F Notebook PC with WNC DC33002SK0L and DC33002SK1L antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 0.75 W/kg respectively.
This change establishes portable category SAR conditions for the
Dell model P114F Notebook PC with WNC DC33002SK0L and DC33002SK1L
antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.61 W/kg and 1.41 W/kg respectively.
This change establishes portable category SAR conditions for the
Lenovo Legion Slim 5 16IRH8 Notebook PC with High-Tek DC33002T900 and
DC33002T910 and Pulse DC33002TF00 and DC33002TF10 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Legion Slim 5 16IRH8 Notebook PC with High-Tek DC33002T900 and DC33002T910 and Pulse DC33002TF00 and DC33002TF10 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.41W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Legion Slim 5 16IRH8 Notebook PC with High-Tek DC33002T900 and DC33002T910 and Pulse DC33002TF00 and DC33002TF10 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.41W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Legion Slim 5 16IRH8 Notebook PC with High-Tek DC33002T900 and DC33002T910 and Pulse DC33002TF00 and DC33002TF10 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P165G PC. The highest reported Body and Simultaneous SAR values are 0.25 W/kg and 0.25 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P165G PC. The highest reported Body and Simultaneous SAR values are 0.25 W/kg and 0.25 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Dell model P165G PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and < 0.10 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P165G PC. This device meets the SAR test exemption threshold listed in KDB 447498 and is authorized for portable operation. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Dell model P181G PC. The highest reported Body and Simultaneous SAR values are 0.31 W/kg and 0.41 W/kg respectively. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
This change establishes portable category SAR conditions for the Dell model P181G PC. The highest reported Body and Simultaneous SAR values are 0.93 W/kg and 1.29 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P181G PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.29 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P181G PC. The highest reported Body and Simultaneous SAR values are 0.31 W/kg and 0.47 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.59 W/kg respectively.
This change establishes portable category SAR conditions for the
Dell model P182G with Wistron antenna Part number 0772W9 and 08V97D.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P182G with Wistron antenna Part number 0772W9 and 08V97D.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P182G with Wistron antenna Part number 0772W9 and 08V97D.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P182G with Wistron antenna Part number 0772W9 and 08V97D.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P172G Convertible PC. The highest reported Body and Simultaneous SAR values are 0.40 W/kg and 1.58 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P172G Convertible PC. The highest reported Body and Simultaneous SAR values are 0.40 W/kg and 1.58 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P172G Convertible PC. The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.58 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Dell model P172G Convertible PC. The highest reported Body and Simultaneous SAR values are 0.56 W/kg and 1.08 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Lenovo model Yoga 7 16IRL8 PC. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.29 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model Yoga 7 16IRL8 PC. The highest reported Body and Simultaneous SAR values are 0.13 W/kg and 1.58 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model Yoga 7 16IRL8 PC. The highest reported Body and Simultaneous SAR values are 1.45 W/kg and 1.58 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model Yoga 7 16IRL8 PC. The highest reported Body and Simultaneous SAR values are 0.93 W/kg and 1.11 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model Yoga 7 14IRL8 PC. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.13 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Lenovo model Yoga 7 14IRL8 PC. The highest reported Body and Simultaneous SAR values are 1.54 W/kg and 1.59 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model Yoga 7 14IRL8 PC. The highest reported Body and Simultaneous SAR values are 1.18 W/kg and 1.27 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model Yoga 7 14IRL8 PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.27 W/kg respectively. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.11W/kg and 1.52W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WLAN TAS implementation with Vendor 1 Part number 81EABP15.G21 and 81EABP15.G22 and Vendor 2 Part Number 0ACCN021019N and 0ACCN021020N antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37W/kg and 1.52W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WLAN TAS implementation with Vendor 1 Part Number 81EABP15.G21 and 81EABP15.G22 and Vendor 2 Part Number 0ACCN021019N and 0ACCN021020N antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 1.52 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WLAN TAS implementation with Vendor 1 Part Number 81EABP15.G21 and 81EABP15.G22 and Vendor 2 Part number 0ACCN021019N and 0ACCN021020N antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.52W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WLAN TAS implementation with Vendor 1 Part Number 81EABP15.G21 and 81EABP15.G22 and Vendor 2 Part Number 0ACCN021019N and 0ACCN021020N antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.56 W/kg and 1.50 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W158 with PIFA antennas Vendor 1 Part number, 025.9027J.0001 and 025.9027K.0001 and Vendor 2 Part number, 025.9027I.0001 and 025.9027H.0001. TAS feature is enabled.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.42W/kg and 1.50W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W158 with PIFA antennas Vendor 1 Part number, 025.9027J.0001 and 025.9027K.0001 and Vendor 2 Part number, 025.9027I.0001 and 025.9027H.0001. TAS feature is enabled.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.50W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W158 with PIFA antennas Vendor 1 Part number, 025.9027J.0001 and 025.9027K.0001 and Vendor 2 Part number, 025.9027I.0001 and 025.9027H.0001. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.50W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W158 with PIFA antennas Vendor 1 Part number, 025.9027J.0001 and 025.9027K.0001 and Vendor 2 Part number, 025.9027I.0001 and 025.9027H.0001. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model Lenovo 500e Yoga Chromebook Gen 4 convertible PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.32 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model Lenovo 500e Yoga Chromebook Gen 4 convertible PC. The highest reported Body and Simultaneous SAR values are 0.64 W/kg and 1.22 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model Lenovo 500e Yoga Chromebook Gen 4 convertible PC. The highest reported Body and Simultaneous SAR values are 0.94 W/kg and 1.32 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Lenovo model Lenovo 500e Yoga Chromebook Gen 4 convertible PC. The highest reported Body and Simultaneous SAR values are 1.06 W/kg and 1.12 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad Slim 5 14IRL8 PC The highest reported Body and Simultaneous SAR values are 0.64 W/kg and 1.22 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad Slim 5 14IRL8 PC The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.49 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad Slim 5 14IRL8 PC The highest reported Body and Simultaneous SAR values are 0.96 W/kg and 1.51 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad Slim 5 14IRL8 PC The highest reported Body and Simultaneous SAR values are 0.97 W/kg and 1.49 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad Slim 5 16IRL8 PC The highest reported Body and Simultaneous SAR values are 0.49 W/kg and 1.00 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad Slim 5 16IRL8 PC The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.45 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad Slim 5 16IRL8 PC The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.19 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model IdeaPad Slim 5 16IRL8 PC The highest reported Body and Simultaneous SAR values are 1.00 W/kg and 1.45 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.44W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I45C PC with TAS feature enabled and extension of the UNII-4 band. Hong-Bo 6036B0314201 and 6036B0316301, 6036B0314301 and 6036B0314401 and WNC 6036B0316401 and 6036B0313501, 6036B0313601 and 6036B0313701 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.44W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I45C PC with TAS feature enabled and extension of the UNII-4 band. Hong-Bo 6036B0314201 and 6036B0316301, 6036B0314301 and 6036B0314401 and WNC 6036B0316401 and 6036B0313501, 6036B0313601 and 6036B0313701 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published
KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.44W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSNI45C PC with TAS feature enabled and extension of the UNII-4 band. Hong-Bo 6036B0314201 and 6036B0316301, 6036B0314301 and 6036B0314401 and WNC 6036B0316401 and 6036B0313501, 6036B0313601 and 6036B0313701 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and simultaneous SAR values are 1.54W/kg and 1.44W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSNI45C PC with TAS feature enabled and extension of the UNII-4 band. Hong-Bo 6036B0314201 and 6036B0316301, 6036B0314301 and 6036B0314401 and WNC 6036B0316401 and 6036B0313501, 6036B0313601 and 6036B0313701 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I46C PC with Vendor 1 6036B0312901 and 6036B0313001 and Vendor 2 6036B0312401 and 6036B0312501 antennas. The WLAN TAS feature is enabled for this application.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Dell model P120F PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.21 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P120F PC. The highest reported Body and Simultaneous SAR values are 0.76 W/kg and 1.28 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P120F PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.51 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P120F PC. The highest reported Body and Simultaneous SAR values are 0.25 W/kg and 0.51 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Lenovo model Lenovo 14e Chromebook Gen 3 PC. The highest reported Body and Simultaneous SAR values are 0.23 W/kg and 0.58 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model Lenovo 14e Chromebook Gen 3 PC. The highest reported Body and Simultaneous SAR values are 0.64 W/kg and 1.21 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model Lenovo 14e Chromebook Gen 3 PC. The highest reported Body and Simultaneous SAR values are 0.76 W/kg and 1.45 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Lenovo model Lenovo 14e Chromebook Gen 3 PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.45 W/kg respectively. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.43W/kg and 1.45W/kg respectively.
This change for HP model TPN-C159 PC establishes the extension to UNII-4 Band.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 0.95W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model IP Flex 3 Chrome 12IAN8 convertible PC with ZTX DC33001ZZ00 and DC33001ZZ10 and Luxshare-ICT DC33001ZW10 and DC33001ZW00 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.42W/kg and 0.95W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model IP Flex 3 Chrome 12IAN8 convertible PC with ZTX DC33001ZZ00 and DC33001ZZ10 and Luxshare-ICT DC33001ZW10 and DC33001ZW00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 0.95W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model IP Flex 3 Chrome 12IAN8 convertible PC with ZTX DC33001ZZ00 and DC33001ZZ10 and Luxshare-ICT DC33001ZW10 and DC33001ZW00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.40 W/kg and 0.95 W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model IP Flex 3 Chrome 12IAN8 convertible PC with ZTX DC33001ZZ00 and DC33001ZZ10 and Luxshare-ict DC33001ZW10 and DC33001ZW00 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.90W/kg and 1.47W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C155 PC with TAS feature enabled.
SAR testing was performed to demonstrate RF compliance. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.52W/kg and 1.60W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C157 PC has been granted on 3/27/2022 for SAR condition, and has been granted on 4/28/2022 for TAS feature enabled. This C2PC establishes the extension to UNII-4 Band.
SAR testing was performed to demonstrate RF compliance. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.87W/kg and 1.60W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C154 with PIFA antennas of equal or lesser gain.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.49 W/kg and 1.60 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C154 with PIFA antennas of equal or lesser gain.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.60W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C154 with PIFA antennas of equal or lesser gain.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.52W/kg and 1.60W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C154 with PIFA antennas of equal or lesser gain.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P171G PC with Speed F-0G-FS-6142-001-00 and F-0G-FS-6142-002-00 antennas. The highest reported Body and Simultaneous SAR values are 0.27 W/kg and 1.39 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Dell model P171G PC with Speed F-0G-FS-6142-001-00 and F-0G-FS-6142-002-00 antennas. The highest reported Body and Simultaneous SAR values are 0.95 W/kg and 1.11 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P171G PC with Speed F-0G-FS-6142-001-00 and F-0G-FS-6142-002-00 antennas. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.39 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P171G PC with Speed F-0G-FS-6142-001-00 and F-0G-FS-6142-002-00 antennas. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.60 W/kg and 1.16 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P171G PC with Speed F-0G-FS-6143-001-00 and F-0G-FS-6143-002-00 antennas. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.47 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P171G PC with Speed F-0G-FS-6143-001-00 and F-0G-FS-6143-002-00 antennas. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.90 W/kg and 1.47 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Dell model P171G PC with Speed F-0G-FS-6143-001-00 and F-0G-FS-6143-002-00 antennas. The highest reported Body and Simultaneous SAR values are 0.76 W/kg and 1.18 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P171G PC with Speed F-0G-FS-6143-001-00 and F-0G-FS-6143-002-00 antennas. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.28 W/kg respectively. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
The equipment in this application is HP model TPN-W155 PC has been granted on 5/17/2022 for SAR condition, and has been granted on 5/20/2022 for TAS feature enabled, and has been granted on 8/23/2022 for EnDM (enhanced device mode) enabled. The module has been granted on 8/29/2022 for the UNII-4 band, and this C2PC establishes the extension of UNII-4 band on this equipment. The highest reported Body and Simultaneous SAR values are 1.26 W/kg and 1.59 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P125F PC with HONG-BO 025.9025N.0001 and 025.9025O.0001 antennas. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.56 W/kg and 1.17 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Dell model P125F PC with HONG-BO 025.9025N.0001 and 025.9025O.0001 antennas. The highest reported Body and Simultaneous SAR values are 0.95 W/kg and 1.21 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P125F PC with HONG-BO 025.9025N.0001 and 025.9025O.0001 antennas. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.80 W/kg and 1.07 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P125F PC with HONG-BO 025.9025N.0001 and 025.9025O.0001 antennas. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 1.17 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P128F PC with WNC 025.9025Q.0001 and 025.9025Q.0001 antennas. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.47 W/kg respectively. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
This change establishes portable category SAR conditions for the Dell model P128F PC with WNC 025.9025Q.0001 and 025.9025Q.0001 antennas. The highest reported Body and Simultaneous SAR values are 0.52 W/kg and 1.15 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P128F PC with WNC 025.9025Q.0001 and 025.9025Q.0001 antennas. The WLAN TAS feature is enabled. The highest reported Body and Simultaneous SAR values are 0.95 W/kg and 1.35 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This change establishes portable category SAR conditions for the Dell model P128F PC with WNC 025.9025Q.0001 and 025.9025Q.0001 antennas. The highest reported Body and Simultaneous SAR values are 0.18 W/kg and 1.47 W/kg respectively. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.27W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I57C Convertible PC. Antenna(s) is/are of the same type and lower gain from original approval, G-Sensor is enabled.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are0.03W/kg and 1.27W/kg respectively.
This change establishes portable category SAR conditions for the HP
model HSN-I57C Convertible PC. Antenna(s) is/are of the same type and lower
gain from original approval, G-Sensor is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.77 W/kg and 1.27 W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I57C Convertible PC. Antenna(s) is/are of the same type and lower gain from original approval, G-Sensor is enabled.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.27W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I57C Convertible PC. Antenna(s) is/are of the same type and lower gain from original approval, G-Sensor is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg for mixed mobile/portable conditions. The highest reported Body and Simultaneous SAR values are 0.67 W/kg and 1.42 W/kg respectively.
SAR testing was performed to demonstrate RF compliance. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg for mixed mobile/portable conditions. The highest reported Body and Simultaneous SAR values are 0.68 W/kg and 1.41 W/kg respectively.
SAR testing was performed to demonstrate RF compliance. |
various | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.43W/kg and 1.59W/kg respectively.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
The equipment in this application is HP model TPN-W155 PC has been granted on 5/17/2022 for SAR condition, and has been granted on 5/20/2022 for TAS feature enabled. This C2PC establishes the EnDM (enhanced device mode). |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.26 W/kg respectively.
Device is a 2 x 2 MIMO configuration. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
The equipment in this application is HP model TPN-W155 PC has been granted on 5/17/2022 for SAR condition, and has been granted on 5/20/2022 for TAS feature enabled. This C2PC establishes the EnDM (enhanced device mode) enabled. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.26W/kg and 1.29W/kg respectively.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
The equipment in this application is HP model TPN-W155 PC has been granted on 5/17/2022 for SAR condition, and has been granted on 5/20/2022 for TAS feature enabled. This C2PC establishes the EnDM (enhanced device mode) enabled. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.59W/kg respectively.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
The equipment in this application is HP model TPN-W155 PC has been granted on 5/17/2022 for SAR condition, and has been granted on 5/20/2022 for TAS feature enabled. This C2PC establishes the EnDM (enhanced device mode) enabled. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.61W/kg and 1.20W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C161 PC with WNC 48EABP07.SGBMLL and 48EABP08.SGBMLL and HTK 219HCTN12195 and 219HCTN12196 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.47W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C161 PC with WNC 48EABP07.SGBMLL and 48EABP08.SGBMLL and HTK 219HCTN12195 and 219HCTN12196 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.74W/kg and 1.47W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C161 PC with WNC 48EABP07.SGBMLL and 48EABP08.SGBMLL and HTK 219HCTN12195 and 219HCTN12196 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.66 W/kg and 1.20 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C161 PC with WNC 48EABP07.SGBMLL and 48EABP08.SGBMLL and HTK 219HCTN12195 and 219HCTN12196 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
The highest reported Body and Simultaneous SAR values are 0.63 W/kg and 1.29 W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Intel RC57 with Auden ANTRP5C119-1801 (Tx1) and ANTRP5C119-1802 (Tx2) antennas. And decrease in the WLAN Output Power through BIOS respectively.
Antenna is of the same type and higher gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.38W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model IP 5 Chrome 16IAU7 PC with SPEED DC33001YD00 and Luxshare-Ict DC33001YC00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 1.38W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model IP 5 Chrome 16IAU7 PC with SPEED DC33001YD00 and Luxshare-Ict DC33001YC00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.53 W/kg and 1.38 W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model IP 5 Chrome 16IAU7 PC with SPEED DC33001YD00 and Luxshare-Ict DC33001YC00 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.38W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model IP 5 Chrome 16IAU7 PC with SPEED DC33001YD00 and Luxshare-Ict DC33001YC00 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.43 W/kg and 0.71 W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model Lenovo Flex 7 14IAU7 PC with AWAN 025.9020M.0001 and 025.9020N.0001 and WNC 025.9020M.0021 and 025.9020N.0021 and HTK 025.9020M.0011 and 025.9020N.0011 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this
filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and
160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36 W/kg and 0.61 W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model Lenovo Flex 7 14IAU7 PC with AWAN 025.9020M.0001 and 025.9020N.0001 and WNC 025.9020M.0021 and 025.9020N.0021 and HTK 025.9020M.0011 and 025.9020N.0011 antennas.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.61 W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model Lenovo Flex 7 14IAU7 PC with AWAN 025.9020M.0001 and 025.9020N.0001 and WNC 025.9020M.0021 and 025.9020N.0021 and HTK 025.9020M.0011 and 025.9020N.0011 antennas.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance and Power Density.
Addition of a new antenna, antenna type is different with the original
application. Hong Bo - HLN P/N 260-25083 (Antenna type: Monopole Antenna). This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51 W/kg and 0.80 W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model Lenovo Flex 7 14IAU7 PC with AWAN 025.9020M.0001 and 025.9020N.0001 and WNC 025.9020M.0021 and 025.9020N.0021 and HTK 025.9020M.0011 and 025.9020N.0011 antennas.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.43W/kg and 1.59W/kg respectively.
The equipment in this application is HP model TPN-W155 PC has been granted the 5/17/2022 with High-Tek 8025.901ZV.0001 and 025.901ZU.0001 and INPAQ 025.90204.0001 and 025.90205.0001 antennas. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.59W/kg respectively.
The equipment in this application is HP model TPN-W155 PC has been granted the 5/17/2022 with High-Tek 8025.901ZV.0001 and 025.901ZU.0001 and INPAQ 025.90204.0001 and 025.90205.0001 antennas. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.99W/kg and 1.59W/kg respectively.
The equipment in this application is HP model TPN-W155 PC has been granted the 5/17/2022 with High-Tek 8025.901ZV.0001 and 025.901ZU.0001 and INPAQ 025.90204.0001 and 025.90205.0001 antennas. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.59 W/kg respectively.
The equipment in this application is HP model TPN-W155 PC has been granted the
5/17/2022 with High-Tek 8025.901ZV.0001 and 025.901ZU.0001 and INPAQ
025.90204.0001 and 025.90205.0001 antennas. TAS feature is enabled.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W155 PC with High-Tek 025.901ZV.0001 and 025.901ZU.0001 and INPAQ 025.90204.0001 and 025.90205.0001 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.26 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W155 PC with High-Tek 025.901ZV.0001 and 025.901ZU.0001 and INPAQ 025.90204.0001 and 025.90205.0001 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.43W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W155 PC with High-Tek 025.901ZV.0001 and 025.901ZU.0001 and INPAQ 025.90204.0001 and 025.90205.0001 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.26W/kg and 1.29W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W155 PC with High-Tek 025.901ZV.0001 and 025.901ZU.0001 and INPAQ 025.90204.0001 and 025.90205.0001 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.35W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G4 IAP PC with SOUTHSTAR DC33002O000 and High-Tek DC33002O100 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.10W/kg and 1.17W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G4 IAP PC with SOUTHSTAR DC33002O000 and High-Tek DC33002O100 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20W/kg and 1.35W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G4 IAP PC with SOUTHSTAR DC33002O000 and High-Tek DC33002O100 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.51 W/kg and 1.11 W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G4 IAP PC with SOUTHSTAR DC33002O000 and High-Tek DC33002O100 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.34W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P117F PC with SPEED F-0G-FS-6123-001 and F-0G-FS-6123-002 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 1.60W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P157G PC with WNC WTN291000L and WTN291000R antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.69W/kg and 1.34W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P117F PC with SPEED F-0G-FS-6123-001 and F-0G-FS-6123-002 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.31 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W147 PC with INPAQ 025.901SO.0001 and 025.901SP.0001 and WNC 025.901SL.0001 and 025.901SL.0011 antennas
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.12 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W147 PC with INPAQ 025.901SO.0001 and 025.901SP.0001 and WNC 025.901SL.0001 and 025.901SL.0011 antennas
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this
filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and
160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.55 W/kg and 1.60 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P157G PC with WNC WTN291000L and WTN291000R antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.19 W/kg and 1.34 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P117F PC with SPEED F-0G-FS-6123-001 and F-0G-FS-6123-002 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.34W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P117F PC with SPEED F-0G-FS-6123-001 and F-0G-FS-6123-002 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.60W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P157G PC with WNC WTN291000L and WTN291000R antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15 W/kg and 1.31 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W147 PC with INPAQ 025.901SO.0001 and 025.901SP.0001 and WNC 025.901SL.0001 and 025.901SL.0011 antennas
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.84W/kg and 1.60W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P157G PC with WNC WTN291000L and WTN291000R antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.12 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W147 PC with INPAQ 025.901SO.0001 and 025.901SP.0001 and WNC 025.901SL.0001 and 025.901SL.0011 antennas
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and1.57W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C157 PC with WNC 48EABP01.SGCLOC and 48EABP02.SGCLOC and HTK 219HCTN12198 and 219HCTN12197 antennas. The WLAN TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.80 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WLAN TAS implementation with WNC 81EABP15.G21 and 81EABP15.G22 and HighTek 0ACCN021019N and 0ACCN021020N antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 0.80W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WLAN TAS implementation with WNC 81EABP15.G21 and 81EABP15.G22 and HighTek 0ACCN021019N and 0ACCN021020N antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.85W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C157 PC with WNC 48EABP01.SGCLOC and 48EABP02.SGCLOC and HTK 219HCTN12198 and 219HCTN12197 antennas. The WLAN TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.93W/kg and 0.80W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WLAN TAS implementation with WNC 81EABP15.G21 and 81EABP15.G22 and HighTek 0ACCN021019N and 0ACCN021020N antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37W/kg and 0.80W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WLAN TAS implementation with WNC 81EABP15.G21 and 81EABP15.G22 and High-Tek 0ACCN021019N and 0ACCN021020N antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C157 PC with WNC 48EABP01.SGCLOC and 48EABP02.SGCLOC and HTK 219HCTN12198 and 219HCTN12197 antennas. The WLAN TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.51 W/kg and 1.57 W/kg respectively.
This change establishes portable category SAR conditions for the HP
model TPN-C157 PC with WNC 48EABP01.SGCLOC and 48EABP02.SGCLOC
and HTK 219HCTN12198 and 219HCTN12197 antennas. The WLAN TAS feature
is enabled.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 15 G4 IAP PC with Southstar DC33002O200 and DC33002O210 and High-Tek DC33002O300 and DC33002O310 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the
Lenovo model ThinkBook 15 G4 IAP PC with Southstar DC33002O200 and
DC33002O210 and High-Tek DC33002O300 and DC33002O310 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.95 W/kg and 1.57 W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 15 G4 IAP PC with Southstar DC33002O200 and DC33002O210 and High-Tek DC33002O300 and DC33002O310 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.99W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 15 G4 IAP PC with Southstar DC33002O200 and DC33002O210 and High-Tek DC33002O300 and DC33002O310 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.45W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model 14IAL7 PC with AWAN DC33001XQ00 and DC33001XQ10 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.13 W/kg and 1.45 W/kg respectively.
This change establishes portable category SAR conditions for the
Lenovo model 14IAL7 PC with AWAN DC33001XQ00 and
DC33001XQ10 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.45W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model 14IAL7 PC with AWAN DC33001XQ00 and DC33001XQ10 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.38W/kg and 1.45W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model 14IAL7 PC with AWAN DC33001XQ00 and DC33001XQ10 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.06W/kg and 1.08W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I47C PC with HONG-BO 6036B0316701 and WNC 6036B0315601 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.43W/kg and 1.08W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I47C PC with HONG-BO 6036B0316701 and WNC 6036B0315601 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.08W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I47C PC with HONG-BO 6036B0316701 and WNC 6036B0315601 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.13 W/kg and 1.08 W/kg respectively.
This change establishes portable category SAR conditions for the HP
model HSN-I47C PC with HONG-BO 6036B0316701 and WNC 6036B0315601
antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.39W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model IP Flex 5 Chrome 14IAU7 PC with Speed DC33001W200 and LUXSHARE-ICT and DC33001W100 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.35W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model IP Flex 5 Chrome 14IAU7 PC with Speed DC33001W200 and LUXSHARE-ICT and DC33001W100 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.49 W/kg and 1.48 W/kg respectively.
This change establishes portable category SAR conditions for the
Lenovo model IP Flex 5 Chrome 14IAU7 PC with Speed DC33001W200 and
LUXSHARE-ICT and DC33001W100 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model IP Flex 5 Chrome 14IAU7 PC with Speed DC33001W200 and LUXSHARE-ICT and DC33001W100 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.34 W/kg and 1.45 W/kg respectively.
This change establishes portable category SAR conditions for the HP
model TPN-C159 PC with WNC 81EABP15.G19 and 81EABP15.G20 and High-Tek
0ACCN021017N and 0ACCN021018N antennas. TAS feature is enabled.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.43W/kg and 1.45W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C159 PC with WNC 81EABP15.G19 and 81EABP15.G20 and High-Tek 0ACCN021017N and 0ACCN021018N antennas. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.60W/kg and 1.45W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C159 PC with WNC 81EABP15.G19 and 81EABP15.G20 and High-Tek 0ACCN021017N and 0ACCN021018N antennas. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.45W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C159 PC with WNC 81EABP15.G19 and 81EABP15.G20 and High-Tek 0ACCN021017N and 0ACCN021018N antennas. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.04W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14s Yoga G2 IAP PC with SOUTHSTAR DC33002O400 and DC33002O410 and High-Tek DC33002O500 and DC33002O510 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 1.04W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14s Yoga G2 IAP PC with SOUTHSTAR DC33002O400 and DC33002O410 and High-Tek DC33002O500 and DC33002O510 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.31 W/kg and 1.04 W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo
model ThinkBook 14s Yoga G2 IAP PC with SOUTHSTAR DC33002O400 and
DC33002O410 and High-Tek DC33002O500 and DC33002O510 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.72W/kg and 1.04W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14s Yoga G2 IAP PC with SOUTHSTAR DC33002O400 and DC33002O410 and High-Tek DC33002O500 and DC33002O510 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.19W/kg and 0.27W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P158G PC with Hong-BO 025.901XO.0011 antenna.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 0.27W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P158G PC with Hong-BO 025.901XO.0011 antenna.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 0.27W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P158G PC with Hong-BO 025.901XO.0011 antenna.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04 W/kg and 0.27 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P158G PC with Hong-BO 025.901XO.0011 antenna.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.65W/kg and 1.36W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P159G PC with WNC 81EABJ15.G27 and 81EABJ15.G28 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.70W/kg and 1.36W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P159G PC with WNC 81EABJ15.G27 and 81EABJ15.G28 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.36W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P159G PC with WNC 81EABJ15.G27 and 81EABJ15.G28 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.88 W/kg and 1.36 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P159G PC with WNC 81EABJ15.G27 and 81EABJ15.G28 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 1.47W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C155 PC with INPAQ DC33002K3C0 antenna. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.18W/kg and 1.47W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C155 PC with INPAQ DC33002K3C0 antenna. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37W/kg and 1.47W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C155 PC with INPAQ DC33002K3C0 antenna. TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.49 W/kg and 1.47 W/kg respectively.
This change establishes portable category SAR conditions for the HP
model TPN-C155 PC with INPAQ DC33002K3C0 antenna. TAS feature is enabled.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 Supplement documentation. When all conditions
of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance,
or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device
containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.41W/kg respectively.
This change establishes portable category SAR conditions for the Asus model PUX3402ZA/UX3402Z/RX3402Z/BX3402Z/Q409Z PC with INPAQ WA-P-LELE-04-014 ZTX 2.00001568 antennas. The WLAN TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.41 W/kg and 1.57 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W153 PC with INPAQ 025.901Z9.0001 and 025.901ZA.0001 and HTK 025.901Z7.0001 and 025.901Z8.0001 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.68W/kg and 1.41W/kg respectively.
This change establishes portable category SAR conditions for the Asus model PUX3402ZA/UX3402Z/RX3402Z/BX3402Z/Q409Z PC with INPAQ WA-P-LELE-04-014 ZTX 2.00001568 antennas. The WLAN TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.17W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the HP
model TPN-W153 PC with INPAQ 025.901Z9.0001 and 025.901ZA.0001 and HTK
025.901Z7.0001 and 025.901Z8.0001 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power
Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported
Body and Simultaneous SAR values are 0.34 W/kg and 1.41 W/kg respectively.
This change establishes portable category SAR conditions for the Asus model PUX3402ZA/UX3402Z/RX3402Z/BX3402Z/Q409Z PC with INPAQ WA-P-LELE-04-014 and ZTX 2.00001568 antennas. The WLAN TAS feature is enabled.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W153 PC with INPAQ 025.901Z9.0001 and 025.901ZA.0001 and HTK 025.901Z7.0001 and 025.901Z8.0001 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The
highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.41W/kg respectively.
This change establishes portable category SAR conditions for the
Asus model PUX3402ZA/UX3402Z/RX3402Z/BX3402Z/Q409Z PC with
INPAQ WA-P-LELE-04-014 ZTX 2.00001568 antennas. The WLAN TAS feature is enabled.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W153 PC with INPAQ 025.901Z9.0001 and 025.901ZA.0001 and HTK 025.901Z7.0001 and 025.901Z8.0001 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.45 W/kg and 1.35 W/kg respectively.
This change establishes portable category SAR conditions for the
Lenovo model 16IAP7 PC with AWAN DC33001XR00 and DC33001XR10
antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are0.78W/kg and 1.35W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model 16IAP7 PC with AWAN DC33001XR00 and DC33001XR10 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.18W/kg and 1.35W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model 16IAP7 PC with AWAN DC33001XR00 and DC33001XR10 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.35W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model 16IAP7 PC with AWAN DC33001XR00 and DC33001XR10 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.53W/kg and 1.13W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P119F PC with WNC 81EABJ15.G21 antenna.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 Supplement documentation. When all conditions
of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance,
or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device
containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for
each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.73W/kg and 1.13W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P119F PC with WNC 81EABJ15.G21 antenna.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.39 W/kg and 1.13 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P119F PC with WNC 81EABJ15.G21 antenna.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The
highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.13W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P119F PC with WNC 81EABJ15.G21 antenna.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.30W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P117F PC with SPEED F-0G-FS-6122-001-00 and F-0G-FS-6122-002-00 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.54W/kg and 1.30W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P117F PC with SPEED F-0G-FS-6122-001-00 and F-0G-FS-6122-002-00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.30W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P117F PC with SPEED F-0G-FS-6122-001-00 and F-0G-FS-6122-002-00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.47 W/kg and 1.30 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P117F PC with SPEED F-0G-FS-6122-001-00 and F-0G-FS-6122-002-00
antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.08W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P161G PC with Hong-BO 260-29100 and 260-29101 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.43W/kg and 1.08W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P161G PC with Hong-BO 260-29100 and 260-29101 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 1.08 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P161G PC with Hong-BO 260-29100 and 260-29101 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.08W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P161G PC with Hong-BO 260-29100 and 260-29101 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.93W/kg and 0.80W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WNC 81EABP15.G21 and 81EABP15.G22 and High-Tek 0ACCN021019N and 0ACCN021020N antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 Supplement documentation. When all conditions
of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating
compliance,or a new application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as
described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37W/kg and 0.80W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WNC 81EABP15.G21 and 81EABP15.G22 and High-Tek 0ACCN021019N and 0ACCN021020N antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power
Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported
Body and Simultaneous SAR values are 0.29 W/kg and 0.80 W/kg respectively.
This change establishes portable category SAR conditions for the HP
model TPN-C160 PC with WNC 81EABP15.G21 and 81EABP15.G22 and High-
Tek 0ACCN021019N and 0ACCN021020N antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The
highest reported Body and Simultaneous SAR values are 0.03W/kg and 0.80W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C160 PC with WNC 81EABP15.G21 and 81EABP15.G22 and High- Tek 0ACCN021019N and 0ACCN021020N antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 Supplement documentation. When all conditions
of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating
compliance,or a new application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as
described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.54W/kg and 1.00W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P139G PC with WNC 025.901RG.0011 and 025.901RG.0011 and Hong-BO 260-29064 and 260-29064 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.00W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P139G PC with WNC 025.901RG.0011 and 025.901RG.0011 and Hong-BO 260-29064 and 260-29064 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 1.00W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P139G PC with WNC 025.901RG.0011 and 025.901RG.0011 and Hong-BO 260-29064 and 260-29064 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 1.00 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P139G PC with WNC 025.901RG.0011 and 025.901RG.0011 and Hong-BO
260-29064 and 260-29064 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C157 PC with WNC 48EABP01.SGCLOC and 48EABP02.SGCLOC and HTK 219HCTN12198 and 219HCTN12197 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.51 W/kg and 1.57 W/kg respectively.
This change establishes portable category SAR conditions for the HP
model TPN-C157 PC with WNC 48EABP01.SGCLOC and 48EABP02.SGCLOC
and HTK 219HCTN12198 and 219HCTN12197 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C157 PC with WNC 48EABP01.SGCLOC and 48EABP02.SGCLOC and HTK 219HCTN12198 and 219HCTN12197 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 Supplement documentation. When all conditions
of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating
compliance,or a new application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as
described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.37W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P139G PC with WNC 025.901RE.0011 and 025.901RF.0011 and Hong-BO 260-29062 and 260-29063 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.37W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P139G PC with WNC 025.901RE.0011 and 025.901RF.0011 and Hong-BO 260-29062 and 260-29063 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 Supplement documentation. When all conditions
of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating
compliance,or a new application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as
described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.85W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C157 PC with WNC 48EABP01.SGCLOC and 48EABP02.SGCLOC and HTK 219HCTN12198 and 219HCTN12197 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power
Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported
Body and Simultaneous SAR values are 0.35 W/kg and 1.37 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P139G PC with WNC 025.901RE.0011 and 025.901RF.0011 and Hong-BO
260-29062 and 260-29063 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.37W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P139G PC with WNC 025.901RE.0011 and 025.901RF.0011 and Hong-BO 260-29062 and 260-29063 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power
Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported
Body and Simultaneous SAR values are 0.49 W/kg and 1.60 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C154 PC with INPAQ DC33002JZ00 antenna.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.81W/kg and 1.60W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C154 PC with INPAQ DC33002JZ00 antenna.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 Supplement documentation. When all conditions
of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating
compliance,or a new application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as
described in this filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.52W/kg and 1.60W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C154 PC with INPAQ DC33002JZ00 antenna.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device
or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The
highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.60W/kg respectively.
This change establishes portable category SAR conditions for the HP
model TPN-C154 PC with INPAQ DC33002JZ00 antenna.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.31W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P157G PC with WNC 81EABJ15.G45 and 81EABJ15.G46 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.82 W/kg and 1.31 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P157G PC with WNC 81EABJ15.G45 and 81EABJ15.G46 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.31W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P157G PC with WNC 81EABJ15.G45 and 81EABJ15.G46 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.31W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P157G PC with WNC 81EABJ15.G45 and 81EABJ15.G46 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.28W/kg respectively.
This change establishes portable category SAR conditions for the Samsung models NP641BEF, NP641BED PC with WNC BA42-00746A and BA42-00747A antenna.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.28 W/kg respectively.
This change establishes portable category SAR conditions for the
Samsung models NP641BEF, NP641BED PC with WNC BA42-00746A and
BA42-00747A antenna.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported
Body and Simultaneous SAR values are 0.13W/kg and 1.28W/kg respectively.
This change establishes portable category SAR conditions for the Samsung models NP641BEF, NP641BED PC with WNC BA42-00746A and BA42-00747A antenna.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 1.15W/kg and 1.28W/kg respectively.
This change establishes portable category SAR conditions for the Samsung models NP641BEF, NP641BED PC with WNC BA42-00746A and BA42-00747A antenna.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P109F PC with WNC 81EABJ15.G53 and 81EABJ15.G54 and Hong-Bo 260-24394 and 260-24393 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P109F PC with WNC 81EABJ15.G53 and 81EABJ15.G54 and Hong-Bo 260-24394 and 260-24393 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to
integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P109F PC with WNC 81EABJ15.G53 and 81EABJ15.G54 and Hong-Bo 260-24394 and 260-24393 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16 W/kg and 1.48 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P109F PC with WNC 81EABJ15.G53 and 81EABJ15.G54 and Hong-Bo
260-24394 and 260-24393 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and
SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10 W/kg and 1.28 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P150G PC with SPEED F-0G-FH-6144-003-00 and WNC C33002L72L
antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.28W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P150G PC with SPEED F-0G-FH-6144-003-00 and WNC C33002L72L antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.28W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P150G PC with SPEED F-0G-FH-6144-003-00 and WNC C33002L72L antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into
specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations
as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous
SAR values are 0.63W/kg and 1.28W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P150G PC with SPEED F-0G-FH-6144-003-00 and WNC C33002L72L antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.32 W/kg respectively.
This change establishes portable category SAR conditions for the HP model
HSN-I45C PC with TAS feature enabled. Hong-Bo 6036B0314201 & 6036B0316301, 6036B0314301& 6036B0314401 and WNC 6036B0316401 & 6036B0313501, 6036B0313601 & 6036B0313701 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are
1.54W/kg and 1.32W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I45C PC with TAS feature enabled. Hong-Bo 6036B0314201 and 6036B0316301, 6036B0314301 and 6036B0314401 and WNC 6036B0316401 and 6036B0313501, 6036B0313601 and 6036B0313701 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 1.19W/kg and 1.32W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I45C PC with TAS feature enabled. Hong-Bo 6036B0314201 and 6036B0316301, 6036B0314301 and 6036B0314401 and WNC 6036B0316401 and 6036B0313501, 6036B0313601 and 6036B0313701 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.32W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I45C PC with TAS feature enabled. Hong-Bo 6036B0314201 & 6036B0316301, 6036B0314301& 6036B0314401 and WNC 6036B0316401 & 6036B0313501, 6036B0313601 & 6036B0313701 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.47W/kg and 0.87W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P111F PC with WNC 81EABJ15.G60 and 81EABJ15.G23 and AWAN AXP8Y DC33002 -100009 and AXP8Y DC33002IV -100004 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and
SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and
Simultaneous SAR values are 0.07 W/kg and 0.87 W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P111F PC with WNC 81EABJ15.G60 and 81EABJ15.G23 and AWAN AXP8Y
DC33002 -100009 and AXP8Y DC33002IV -100004 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported
Body and Simultaneous SAR values are 0.04W/kg and 0.87W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P111F PC with WNC 81EABJ15.G60 and 81EABJ15.G23 and AWAN AXP8Y DC33002 -100009 and AXP8Y DC33002IV -100004 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to
integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 0.87W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P111F PC with WNC 81EABJ15.G60 and 81EABJ15.G23 and AWAN AXP8Y DC33002 -100009 and AXP8Y DC33002IV -100004 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.58 W/kg and 1.43 W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I46C PC with Hong-Bo 6036B0312901 and 6036B0313001 and WNC 6036B0312401 and 6036B0312501 antennas. The WLAN TAS feature is enabled for this application.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.43W/kg respectively.
This change establishes portable category SAR conditions for the HP model
HSN-I46C PC with Hong-Bo 6036B0312901 and 6036B0313001 and WNC 6036B0312401 and 6036B0312501 antennas. The WLAN TAS feature is enabled
for this application.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation
of this device into specific final products may require the submission of a permissive change application, containing
appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth
modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.65W/kg and 1.43W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I46C PC with Hong-Bo 6036B0312901 and 6036B0313001 and WNC 6036B0312401 and 6036B0312501 antennas. The WLAN TAS feature is enabled for this application.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.43W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I46C PC with Hong-Bo 6036B0312901 and 6036B0313001 and WNC 6036B0312401 and 6036B0312501 antennas. The WLAN TAS feature is enabled for this application.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.44W/kg respectively.
This change establishes portable category SAR conditions for the HP model
TPN-W146 ( Slinky 1.2) PC with INPAQ 025.901SM.0021 and 025.901SM.0031 and WNC 025.901SM.0001 and 025.901SM.0011 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter
product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating
conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.34 W/kg and 1.60 W/kg respectively.
This change establishes portable category SAR conditions for the HP model
TPN-W146 ( Slinky 1.2) PC with INPAQ 025.901SM.0021 and 025.901SM.0031 and WNC 025.901SM.0001 and 025.901SM.0011 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation
of this device into specific final products may require the submission of a permissive change application, containing
appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth
modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 1.32W/kg and 1.44W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W146 ( Slinky 1.2) PC with INPAQ 025.901SM.0021 and 025.901SM.0031 and WNC 025.901SM.0001 and 025.901SM.0011 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to
integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.08W/kg and 1.44W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W146 ( Slinky 1.2) PC with INPAQ 025.901SM.0021 and 025.901SM.0031 and WNC 025.901SM.0001 and 025.901SM.0011 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
The highest reported Body and Simultaneous SAR values are 0.94 W/kg and 1.25 W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Intel RC57 with Auden ANTRP5C119-1801 (Tx1) and ANTRP5C119-1802 (Tx2) antennas. And decrease in the WLAN Output Power through BIOS respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
The highest reported Body and Simultaneous SAR values are 0.34 W/kg and 1.53 W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Intel RC57 with Auden ANTRP5C119-1801 (Tx1) and ANTRP5C119-1802 (Tx2) antennas. And decrease in the WLAN Output Power through BIOS respectively.
Antenna is of the same type and higher gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
The highest reported Body and Simultaneous SAR values are 1.20 W/kg and 1.53 W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Intel RC57 with Auden ANTRP5C119-1801 (Tx1) and ANTRP5C119-1802 (Tx2) antennas. And decrease in the WLAN Output Power through BIOS respectively.
Antenna is of the same type and higher gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used
with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance,or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to
integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 1.27W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W148 PC with High-Tek 025.901S2.0011 and 025.901S2.0001 and WNC 025.901S2.0031 and 025.901S2.0021 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.27W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W148 PC with High-Tek 025.901S2.0011 and 025.901S2.0001 and WNC 025.901S2.0031 and 025.901S2.0021 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation
of this device into specific final products may require the submission of a permissive change application, containing
appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth
modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 1.25W/kg and 1.27W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W148 PC with High-Tek 025.901S2.0011 and 025.901S2.0001 and WNC 025.901S2.0031 and 025.901S2.0021 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and
SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.36 W/kg and 0.74 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W148 PC with High-Tek 025.901S2.0011 and 025.901S2.0001 and WNC 025.901S2.0031 and 025.901S2.0021 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must
be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.34 W/kg and 0.68 W/kg respectively.
This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 5mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets KDB 447498 as a mobile device.
Addition an new antenna, antenna type is different from the original application. The antenna gain is <= original. (Antenna type: Dipole Antenna / 6XD Grant).
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 Supplement documentation. When all
conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating
compliance,or a new application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as
described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.29W/kg and 1.35W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W149 PC with WNC 025.901S3.0011 and 025.901S3.0001 and High-Tek 025.901S3.0031 and 025.901S3.0021 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must
be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.41 W/kg and 0.88 W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W149 PC with WNC 025.901S3.0011 and 025.901S3.0001 and High-Tek 025.901S3.0031 and 025.901S3.0021 antennas.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final
products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes
as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.35W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W149 PC with WNC 025.901S3.0011 and 025.901S3.0001 and High-Tek 025.901S3.0031 and 025.901S3.0021 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except in
accordance with FCC multi-transmitter product procedures. Grantee must provide installation and
operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions
for satisfying RF exposure compliance. The highest reported Body and
Simultaneous SAR values are 0.06W/kg and 1.35W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W149 PC with WNC 025.901S3.0011 and 025.901S3.0001 and
High-Tek 025.901S3.0031 and 025.901S3.0021 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge
channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those
antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure
RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB
616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing
appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device
is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.41W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.41W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.41W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish
minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.67W/kg and 1.42W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 1.42W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except in
accordance with FCC multi-transmitter product procedures. Grantee must provide installation
and operating instructions for complying with FCC multi-transmitter product procedures. Only
those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.42W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish
minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi
transmitter product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
Addition of new antenna, antenna type is different with the original application. Antenna type - Wieson Dipole ARY121-0009-002-H0, tested at 20cm. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance,or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
Addition of new antenna, antenna type is different from the original application. Antenna type - Wieson Dipole ARY121-0009-002-H0 tested at 20cm. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate
with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a
client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as
described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
Addition of new antenna, antenna type is different with the original application. Antenna type - Wieson Dipole ARY121-0009-002-H0, tested at 20cm. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except in
accordance with FCC multi transmitter product procedures. Grantee must provide installation
and operating instructions for complying with FCC multi-transmitter product procedures. Only
those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be
used with this transmitter. End-users and installers must be provided with transmitter
operating conditions for satisfying RF exposure compliance. The highest reported Body and
Simultaneous SAR values are 0.01W/kg and 1.14W/kg respectively.
Addition of a new antenna, antenna type is different with the original application. (Antenna type: Hong Bo Monopole Antenna P/N 260-25083) tested at 29mm.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.14W/kg respectively.
Addition of a new antenna, antenna type is different with the original application. (Antenna type: Hong Bo Monopole Antenna P/N 260-25083) tested at 29mm.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.58W/kg and 1.14W/kg respectively.
Addition of a new antenna, antenna type is different with the original application. (Antenna type: Hong Bo Monopole Antenna P/N 260-25083) tested at 29mm.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and
SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively.
This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are
0.79W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance, or a new application.
OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
Intel Corporation S.A.S.
|
various
|
Intel Corporation - Oregon CPRS Labs
|
various
|
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
various
|
SPORTON International Inc.
|
various
|
EMITECH Montpellier
|
various
|
Name |
N****** A******
|
various
|
F**** B****
|
various
|
M**** L********
|
various
|
A******** C********
|
various
|
O****** H****
|
various
|
Telephone Number |
00334********
|
various
|
50361********
|
various
|
+886-******** Extension:
|
various
|
+886-******** Extension:
|
various
|
33-4-********
|
various
|
00334********
|
various
|
Fax Number |
50369********
|
various
|
+886-********
|
various
|
33-4-********
|
various
|
00334********
|
various
|
E-mail |
n******@intel.com
|
various
|
f******@intel.com
|
various
|
m******@dekra.com
|
various
|
a******@sporton.com.tw
|
various
|
o******@emitech-group.com
|
|