FCC ID: BEJTM15FNNATY0 NAD module

Technical Specification

(TM15FNNATY0) FCC ID: BEJTM15FNNATY0 IC: 2703H-TM15FNNATY0 Model Name : TM15FNNATY0 1/9 History Ver. Date Contents 1.0 2022.12.02 Written by Checked by Approved by Note 2/9 Contents 1. Product Introduction .................................................................................................. 4 1.2 Environmental Specifications ...................................................................................... 4 1.3 Electrical Specifications .............................................................................................. 5 1.3.1 Absolute Maximum Rating and ESD Ratings ........................................................... 5 1.3.2 Current Consumption ............................................................................................... 5 1.4 Mechanical Specifications ........................................................................................... 5 1.4.1 Physical Dimensions and Connection Interface ....................................................... 5 1.4.2 Mechanical Drawing ................................................................................................. 5 2. RF Specification ............................................................................................................ 7 2.1 5G NR Specification .................................................................................................... 7 2.2 LTE Specification ........................................................................................................ 8 3/9 1. Product Introduction The TM15FNNATY0 are designed for the automotive industry. They support 5G NR, LTE and WCDMA air Interface standards. The TM15FNNATY0 are based on the Qualcomm SA515M wireless chipsets and support the following bands. Only 5G NR and LTE will be supported in USA Table 1. Supported Band Region NA (North America) NR n2/n5/n12/n66/n77 Band LTE B2/4/5/12/14/66 WCDMA

1.1 Block Diagram

- Confidential 1.2 Environmental Specifications The environmental specification for operating and storage of the TM15FNNATY0 are defined in the the table below. Table 2. Environmental Specifications Parameter Temperature Range Operating Temperature Excluding the ME

-30 to 95

-20 to 95 (BUB Discharge) ME

-30 to 100

-20 to 100 (BUB Discharge) Storage Temperature Excluding the ME ME

-40 to 95

-40 to 100 Humidity 95% or less 4/9 1.3 Electrical Specifications This section provides details for some of the key electrical specifications of the TM15FNNATY0 embedded modules. 1.3.1 Absolute Maximum Rating This section defines the Absolute Maximum Ratings of the TM15FNNATY0 embedded modules. Warning: If these parameters are exceeded, even momentarily, damage may occur to the device. 1.3.2 Current Consumption Table 4. TM15FNNATY0 Current Consumption (@3.9V) Mode Parameter Typical Max Units LTE Max TX Output /Full RB WCDMA Max TX Output /Full RB LTE Idle, Registered WCDMA Idle, Registered 550 550 2 2 TBD TBD

mA mA mA mA 1.4 Mechanical Specifications 1.4.1 Physical Dimensions and Connection Interface The TM15FNNATY0 embedded modules are a Land Grid Array(LGA) form factor device. The device does not have a System or RF connectors. All electrical and mechanical connections are made via the LGA pad on the underside of the PCB. Table5. TM15FNNATY0 Embedded Module Dimensions Nominal 45 x 39 Parameter Overall Dimension Overall Module Height 3.4 PCB Thickness 1.0 Flatness Specification Weight TBD Max 45.35 x 39.35 3.6 1.1 0.15 Units mm mm mm mm g 1.4.2 Mechanical Drawing 5/9 1.4.2.1 NAD PCB 6/9 2. RF Specification The specifications for the 5G NR & LTE interfaces are defined. TM15FNNATY0 is designed to be compliant with the standard shown in the table below. Table6. Standards Compliance Technology Standards 5G NR LTE 3GPP Release 15 3GPP Release 15 2.1 5G NR Specification 2.1.1 NR RX Sensitivity The Receiver Sensitivity of the TM15FNNATY0 are specified in the following table. Table7. Conducted RX (Receive) Sensitivity NR Bands BAND Method (DL CH) Specification n2 Reference sensitivity level n5 Reference sensitivity level n12 Reference sensitivity level n66 Reference sensitivity level n77 Reference sensitivity level Measure BLER of Mid Channel (392000) in Band2 Measure BLER of Mid Channel (176300) in Band5 Measure BLER of Mid Channel (147500) in Band12 Measure BLER of Mid Channel (431000) in Band66 Measure BLER of Mid Channel (650000) in Band77 sensitivity : -94.1 BLER : 5%

(SCS:15 kHz / BW:10 MHz) sensitivity : -94.1 BLER : 5%

(SCS:15 kHz / BW:10 MHz) sensitivity : -93.1 BLER : 5%

(SCS:15 kHz / BW:10 MHz) sensitivity : -95.6 BLER : 5%

(SCS:15 kHz / BW:10 MHz) sensitivity : -84.1 BLER : 5%

(SCS:30 kHz / BW:100 MHz) 7/9 2.2 LTE Specification 2.2.1 LTE RX Sensitivity The Receiver Sensitivity of the TM15FNNATY0 are specified in the following table. Table7. Conducted RX (Receive) Sensitivity LTE Bands BAND Method (DL CH) BAND 2 Reference sensitivity level BAND 4 Reference sensitivity level BAND 5 Reference sensitivity level BAND 12 Reference sensitivity level BAND 14 Reference sensitivity level BAND 66 Reference sensitivity level Measure BLER of Mid Channel (900) in Band2 Measure BLER of Mid Channel (2175) in Band4 Measure BLER of Mid Channel (2525) in Band5 Measure BLER of Mid Channel (5095) in Band12 Measure BLER of Mid Channel (5330) in Band14 Measure BLER of Mid Channel (66886) in Band66 Specification sensitivity : -94.3 BLER : 5%

sensitivity : -96.3 BLER : 5%

sensitivity : -94.3 BLER : 5%

sensitivity : -93.3 BLER : 5%

sensitivity : -93.3 BLER : 5%

sensitivity : -95.8 BLER : 5%

8/9 Notice Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiating element of this device and the user. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 9/9

1.1 ID Label Information FCC ID: BEJTM15FNNATY0 IC: 2703H-TM15FNNATY0 Model Name : TM15FNNATY0 1.2 Label Location Drawing The laser marking shown shall be permanently marked at a conspicuous location on the device. Figure 1.1 Laser marking Location FCC ID: BEJTM15FNNATY0 IC: 2703H-TM15FNNATY0 Model: TM15FNNATY0

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07/06/2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: BEJ LG Electronics USA (the applicant) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information:

FRN: 0023476120 Name: LG Electronics USA Address: 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Contact Person: Heejae Cho Tel.: 201-470-2696 Email: heejae.cho@lge.com Sincerely, LG Electronics USA Heejae Cho Rev 1/26/2023

LG Electronics USA, Inc. 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-01-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: BEJTM15FNNATY0 LG Electronics USA, Inc. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Heejae Cho Rev 1/26/2023 LG Electronics USA, Inc. 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-01-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: BEJTM15FNNATY0 LG Electronics USA, Inc. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List ( as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment . Sincerely, Heejae Cho Rev 1/26/2023

111SylvanAvenueNorthBuildingEnglewoodCliffsNewJerseyUnitedStates 07632 LGElectronicsUSA Date : 08/29/2023 Class II Permissive Change Request Letter FCC ID: BEJTM15FNNATY0 To Whom It May Concern:

We are submitting an application for a class II permissive change to the FCC approval. The change are as follows;

-Antenna changed (Refer to the antenna specification.)

-Trace design changed (Refer to the operation description.) ________________________ Signature Name: Heejae Cho Title: Director, Regulatory and Environmental Affairs, LG Electronics USA

LG Electronics USA, Inc. 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Date: 08/29/2023 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 FCC ID: BEJTM15FNNATY0 To Whom It may Concern:

Request of Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, LG Electronics USA, Inc.. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give LG Electronics USA, Inc.. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows:

PERMANENT & SHORT-TERM CONFIDENTIAL LIST PERMANENT SHORT-TERM Description Exhibit 1 2 3 4 5 6 7 8 9 Block Diagram Schematics Part Lists Operation Description Tune-up Procedure Internal Photos External Photos Test-Setup Photos NA The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Contact Name: Heejae Cho Title: Director, Regulatory and Environmental Affairs

LG Electronics USA, Inc. 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Date: 08/29/2023 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Letter of Authorization We, the undersigned, hereby authorize Geunki Son of Dt&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: BEJTM15FNNATY0 including signing of all documents relating to these matters. Any and all acts carried out by Geunki Son of Dt&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from LG Electronics USA, Inc.. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Sincerely, Contact Name: Heejae Cho Title: Director, Regulatory and Environmental Affairs

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-23-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: BEJTM15FNNATY0 LG Electronics USA certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Heejae Cho Rev 1/26/2023 LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-23-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: BEJTM15FNNATY0 LG Electronics USA certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Heejae Cho Rev 1/26/2023

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Date: 02/23/2023 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 FCC ID: BEJTM15FNNATY0 To Whom It may Concern:

Request of Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, LG Electronics USA, Inc.. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give LG Electronics USA, Inc.. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows:

PERMANENT & SHORT-TERM CONFIDENTIAL LIST PERMANENT SHORT-TERM Description Exhibit 1 2 3 4 5 6 7 8 9 Block Diagram Schematics Part Lists Operation Description Tune-up Procedure Internal Photos External Photos Test-Setup Photos User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Contact Name: Heejae Cho Title: Director, Regulatory and Environmental Affairs

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Date: 03/03/2023 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 FCC ID: BEJTM15FNNATY0 To Whom It may Concern:

Letter of Declaration We hereby declare that the module is not for sale and integration instructions are internal confidential manufacturing documents. We request that integration instructions be placed in operation description and treated as long-term confidential. Sincerely, Contact Name: Heejae Cho Title: Director, Regulatory and Environmental Affairs

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 MODULAR APPROVAL LETTER Date: 02/23/2023 FCC ID: BEJTM15FNNATY0 Modular Approval Requirement

(i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements.

(ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation.

(iii) The modular transmitter must have its own power supply regulation.

(iv) The modular transmitter must comply with the antenna and transmission system requirements of 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). The professional installation provision of 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section.

(v) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see 15.31(i)).

(vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number.

(vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization.

(viii) Radio frequency devices operating under the provisions of this part are subject to the radio frequency radiation exposure requirements specified in 1.1307(b), 1.1310, 2.1091, and 2.1093 of this chapter, as appropriate. Applications for equipment authorization of modular transmitters under this section must contain a statement confirming compliance with these requirements. The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Technical information showing the basis for this statement must be submitted to the Commission upon request. Sincerely, Contact Name: Heejae Cho Title: Director, Regulatory and Environmental Affairs Answers Yes Yes Yes Not applicable (This device is licensed transmitter. ) Yes Yes Yes Yes

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Date: 02/23/2023 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Letter of Authorization We, the undersigned, hereby authorize Geunki Son of Dt&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: BEJTM15FNNATY0 including signing of all documents relating to these matters. Any and all acts carried out by Geunki Son of Dt&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from LG Electronics USA. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Sincerely, Contact Name: Heejae Cho Title: Director, Regulatory and Environmental Affairs

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02/23/2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: BEJ LG Electronics USA (the applicant) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information:

FRN: 0023476120 Name: LG Electronics USA Address: 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Contact Person: Heejae Cho Tel.: 201-470-2696 Email: heejae.cho@lge.com Sincerely, LG Electronics USA Heejae Cho Rev 1/26/2023