SPECIFICATIONS PRODUCT NAME : 802.11a/b/g/n/ac + Bluetooth Combo Module MODEL NAME
: WC1NP8 The information contained herein is the exclusive property of LG Innotek and shall not be distributed, reproduced or disclosed in whole or no in part without prior written permission of LG Innotek. Designed Checked Approved H.J. ROH D.S. OH S.D. CHOI LG Innotek Co., Ltd. DOCUMENT No. 17(A)ER-005 2017.10.22 2017.10.27 2017.11.01 PAGE 25
(00)-0073 REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV.NO : 2.0 PAGE :
1 / 22 DOCUMENT No :
WC40134 Index No Description 1 Features 2 Ordering Information 3 Label Marking 4 Block Diagram 5 Absolute Maximum Ratings 6 Operating Conditions 7 Standard Test Conditions 8 Electrical Specifications for Wi-Fi 9 Electrical Specifications for Bluetooth 10 Environment Tests 11 Pin Description 12 Test Method 13 Mechanical Characteristics 14 Outline Drawing 15 Insulation Parts List 16 Packing Information 17 LG CI Specification 18 Change History of Revision Page 2 2 2 3 3 4 4 5 11 14 15 16 17 18 19 20 22 25 Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV.NO : 2.0 PAGE :
2 / 22 DOCUMENT No :
WC40134 1. Features WC1NP8 is the small size and low power module for IEEE 802.11ac wireless LAN &
BT4.2 + HS. TWCM-E001D is based on QCA9379-7 solution.
* Caution: This model dont support AC Mode IEEE 802.11 a/b/g/n/ac Dual Band WLAN infrastructure Bluetooth 4.2+ HS , BLE Size : 68.0mm x 38.0 x 6.8 mm Two stream spatial multiplexing up to 300Mbps(802.11n)/ 867Mbps(802.11ac) WLAN Metal Press antenna(Ready), BT Printed antenna on Use on-chip OTP (One-Time Programmable) Host Interface :
-WLAN : USB2.0
-BT : USB1.1 Security : WAPI, WEP, WPA, WPA2, WMM, AES, WEP, TKIP, CKP Application: DTV, DVR, HD DVD Player, Blue-ray Disk Player, STB 2. Ordering Information Description 802.11 a/b/g/n/ac + BT combo Module, Dual Band 2T2R MIMO Model TWCM-E001D WC1NP8 3. Label marking EAT64113401 1710A210101 TWCM-E001D 001EB2B00339 Customer P/N Product Lot No. : 1710A210101 MAC Address BAR Code
-17 : Year - 21 : Date Model No
- 10: Month - 01 : Manufactured Process
- A : Revision No - 01 : Change History of Revision MAC Address No. Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
3 / 22 DOCUMENT No :
WC40134 4. Block Diagram ANT0 Diplexer
& Balun ANT1 Matching Diplexer
& Balun Matching BT ANT QCA9379 2.4GHz 5GHz 2.4GHz 5GHz 11ac 2T2R Baseband 32bit RISC CPU System Control MAC /
USB2.0 Packet buffer/
Interface Security engine LPF 2.4GHz BT Bluetooth Baseband MAC 40MHz 1.1V Main Clock DC Buck USB1.1 Interface 3.45V R O T C E N N O C N I P 2 1 F
/
I B S U 5. Absolute Maximum Ratings Caution : The specifications in Table 1 define levels at which permanent damage to the device can occur. Function operation is not guaranteed under these conditions. Operating at absolute maximum conditions for extend periods can adversely affect the long-term reliability of the device. Parameter Storage Temperature Storage Humidity (40)
. Other conditions Min
-20
-
< Table 1 >
Max
+80 90 Unit
%
1) Do not use or store modules in the corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are contained. Also, avoid exposure to moisture. 2) Store the modules where the temperature and relative humidity do not exceed 5 to 40 and 20 to 60%. 3) Assemble the modules within 6 months. Check the soldering ability in case of 6 months over. Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
4 / 22 DOCUMENT No :
WC40134 6. Operating Conditions Parameter Min Typ Max Unit Ambient Temperature Ambient Humidity (40) 0
-
-
-
Supply Voltage 3.35 3.45 60 85 3.6
%
Vdc 7. Standard Test Conditions The Test for electrical specification shall be performed under the following condition Otherwise this following conditions, not guaranteed this performance. 7-1. Ambient condition Temperature Humidity 7-2. Power supply voltages Input power VDD_3.3V 25 5 65 5%
Supply Voltage 3.35 ~ 3.6V 7-3. Current consumption (2X2 Continuous Power) Current Consumption Min. Typ. Max. TX Mode ( CCK 1M @ 17dBm)
-
1A Note 1 : This figure is the RMS(root mean square) Value. Unit mA 7-4. ESD Information Human Body Model (HBM) Min. Contact Air
-
-
Max. 2 10 Unit kV Note 1 : IEC 61000-4-2 (150pF, 330R) Test condition : After 8-pin USB Cable connect to module, progress ESD test. Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
5 / 22 DOCUMENT No :
WC40134 8. Electrical Specifications for Wi-Fi ( Radiation Test ) 8-1. RF Characteristics for IEEE802.11b ( 11Mbps mode unless otherwise specified) Items Specification Mode Channel frequency Data rate Contents IEEE802.11b DSSS/CCK 2400 ~ 2483.5 MHz 1, 2, 5.5, 11Mbps TX Characteristics Min. Typ. Max. Unit 14 17 20 dBm dBr dBr
%
Usec ppm ppm Unit dBm dBm Power Level 2) Spectrum Mask 1st side lobes ( to fc 11MHz) 2nd side lobes ( to fc 22MHz) Modulation Accuracy (EVM) Power On/Off ramp Freq. Tolerance Chip Clock Freq. Tolerance
-
-
-
-
-20
-20
-43
-58 30 0.5
-
-
-30
-50 35 2.1 20 20 RX Characteristics Min. Typ. Max. Minimum Input Level Sens. (FER 8%) Maximum Input Level (FER 8%)
-10
-88
-
-82
-
* Normal Condition : 25, VDD=3.3V. Note 1. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Note 2. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
6 / 22 DOCUMENT No :
WC40134 8-2. RF Characteristics for IEEE802.11g ( 54Mbps mode unless otherwise specified) Items Specification Mode Channel frequency Data rate Contents IEEE802.11g OFDM 2400 ~ 2472 MHz 6, 9, 12, 18, 24, 36, 48, 54Mbps TX Characteristics Min. Typ. Max. Unit 12 15 18 dBm Power Level Spectrum Mask at fc 11MHz at fc 20MHz at fc 30MHz Constellation Error (EVM) Freq. Tolerance Chip Clock Freq. Tolerance
-
-
-
-
-20
-20
-32
-43
-48
-32
-
-
-20
-28
-40
-25 20 20 dBr dBr dBr dB ppm ppm Unit dBm dBm RX Characteristics Min. Typ. Max. Minimum Input Level Sens. (PER 10%)
-
Maximum Input Level (PER 10%)
-20
-74
-
-67
-
* Normal Condition : 25, VDD=3.3V. Note 1. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Note 2. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
7 / 22 DOCUMENT No :
WC40134 8-3. RF Characteristics for IEEE802.11a ( 54Mbps mode unless otherwise specified) Items Specification Mode Channel frequency Data rate Contents IEEE802.11a OFDM 5150~5850 MHz 6, 9, 12, 18, 24, 36, 48, 54Mbps TX Characteristics Min. Typ. Max. Unit 10 13 16 dBm Power Level 2) Spectrum Mask at fc 11MHz at fc 20MHz at fc 30MHz Constellation Error (EVM) Freq. Tolerance Chip Clock Freq. Tolerance
-
-
-
-
-20
-20
-32
-43
-48
-32
-
-
-20
-28
-40
-25 20 20 dBr dBr dBr dB ppm ppm Unit dBm dBm RX Characteristics Min. Typ. Max. Minimum Input Level Sens. (PER 10%)
-
Maximum Input Level (PER 10%)
-30
-73
-
-67
-
* Normal Condition : 25, VDD=3.3V. Note 1. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Note 2. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
8 / 22 DOCUMENT No :
WC40134 8-4. RF Characteristics for IEEE802.11gn ( MCS7 mode unless otherwise specified) Items Contents Specification Mode Channel frequency Data rate IEEE802.11n 2.4GHz OFDM 2400 ~ 2483.5 MHz 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps TX Characteristics Min. Typ. Max. Unit Power Level (HT20:MCS7) 12 15 18 dBm Spectrum Mask (HT20) at fc 11MHz at fc 20MHz at fc 30MHz Constellation Error (EVM) Freq. Tolerance Chip Clock Freq. Tolerance
-
-
-
-
-20
-20
-32
-35
-45
-32
-
-
-20
-28
-40
-28 20 20 RX Characteristics Min. Typ. Max. dBr dBr dBr dB ppm ppm Unit Minimum Input Level Sens.
(HT20,PER 10%)
-
-73
-66 dBm Maximum Input Level (PER 10%)
-20
-
-
dBm
* Normal Condition : 25, VDD=3.3V. Note 1. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Note 2. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
9 / 22 DOCUMENT No :
WC40134 8-5. RF Characteristics for IEEE802.11an ( MCS7 mode unless otherwise specified) Items Contents Specification Mode Channel frequency Data rate IEEE802.11n 5GHz OFDM 5150~5850 MHz 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps TX Characteristics Min. Typ. Max. Unit Power Level (HT20/HT40:MCS7) 10 13 16 dBm Spectrum Mask (HT20) at fc 11MHz at fc 20MHz at fc 30MHz Constellation Error (EVM) Freq. Tolerance Chip Clock Freq. Tolerance
-
-
-
-
-20
-20
-32
-35
-45
-32
-
-
-20
-28
-40
-28 20 20 RX Characteristics Min. Typ. Max. dBr dBr dBr dB ppm ppm Unit Minimum Input Level Sens.
(HT20,PER 10%) Minimum Input Level Sens.
(HT40,PER 10%)
-
-
-70
-64 dBm
-67
-62 dBm Maximum Input Level (PER 10%)
-30
-
-
dBm
* Normal Condition : 25, VDD=3.3V. Note 1. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Note 2. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
10 / 22 DOCUMENT No :
WC40134 8-4. RF Characteristics for IEEE802.11ac ( MCS8/9 mode unless otherwise specified) Items Contents Dont support This Model Note 1: This varies by regulatory domain Refer to the product documentation for specific details for each regulatory domain Note 2: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
11 / 22 DOCUMENT No :
WC40134 9. Electrical Specifications for Bluetooth ( Conducted Test ) 9-1. Transmitter Performance Parameter (Condition) Min. Typ. Max. Unit Transmit Power (PGPSK) Power Density Frequency Range 20dB Bandwidth In-band Spurious Emissions 500kHz
|M-N| = 2MHz
|M-N| 3MHz 6
-
2400
-
-
-
-
11
-
-
-
-
-
-
15 20 dBm dBm 2483.5 MHz 1000 kHz
-20
-20
-40 Modulation Characteristics, frequency Deviation F1avg (00001111 sequence in payload) 140 155 175 F2max (10101010 sequence in payload) 115 F1avg / F2max Initial Carrier Frequency Tolerance Carrier Frequency Drift DH1 Packet DH3 Packet DH5 Packet Drift rate
* Normal Condition : 25, VDD=3.5V.
* Supported bluetooth tx power class 1. 80
-75
-25
-25
-40
-20
-
90
-
-
-
-
-
-
-
75 25 25 40 20 Copyright. 2016. All Rights Reserved. dBc dBm dBm kHz kHz
%
kHz kHz kHz kHz kHz / s REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
12 / 22 DOCUMENT No :
WC40134 9-2. Transmitter Performance Parameter (Condition) Min. Typ. Max. Unit EDR Relative Transmit Power EDR Carrier Frequency Stability i (2-DH5 and 3-DH5) 0 (2-DH5 and 3-DH5) i + 0 (2-DH5 and 3-DH5) EDR Modulation Accuracy RMS DEVM 99% DEVM DEVM < 0.30, /4-DQPSK DEVM < 0.20, 8DPSK symbols Peak DEVM EDR Differential Phase Encoding
(packet with 0 error > 99%) EDR In-band Spurious Emissions
|M-N| = 1MHz
|M-N| = 2MHz
|M-N| = 3MHz Enhanced Power Control 2-DH5 3-DH5 2-DH5 3-DH5 2-DH5 3-DH5
-4
-75
-10
-75
-
-
99 99
-
-
99
-
-
-
-
-
-
-
-
6 6
-
-
13 13
-
-
-
-
-
1 dB 75 10 75 20 13
-
-
35 25
-
Ptx_ref-
26
-20
-40 4 kHz kHz kHz
%
%
%
%
%
%
%
dBm dBm dBm dBm 9-3. BLE RF Performance Parameter (Condition) Min. Typ. Max. Unit Tx Power Rx sensitivity (GFSK, BER, 1 Mbps) 0
-
4 8 dBm
-90
-80 dBm Mod Char : delta F1 average 225 255 275 kHz Mod Char : delta F2 max Mod Char : ratio 99.9 80
-
95
-
-
%
%
Copyright. 2016. All Rights Reserved. DOCUMENT No :
WC40134 REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
13 / 22 9-4. Receiver Performance Parameter (Condition) Min. Typ. Max. Unit Rx sensitivity GPSK, 0.1% BER, 1Mbps
/4-DQPSK, 0.01% BER, 2Mbps 8-DPSK, 0.01% BER, 3Mbps C/I performance C/I co-channel (GFSK, 0.1%BER) C/I 1MHz (GFSK, 0.1%BER) C/I 2MHz (GFSK, 0.1%BER) C/I 3MHz (GFSK, 0.1%BER) C/I image (GFSK, 0.1%BER) C/I image 1MHz (GFSK, 0.1%BER) C/I co-channel (/4-DQPSK, 0.1%BER) C/I 1MHz (/4-DQPSK, 0.1%BER) C/I 2MHz (/4-DQPSK, 0.1%BER) C/I 3MHz (/4-DQPSK, 0.1%BER) C/I image (/4-DQPSK, 0.1%BER) C/I image1MHz (/4-DQPSK,0.1%BER) C/I co-channel (8-DPSK, 0.1%BER) C/I 1MHz (8-DPSK, 0.1%BER) C/I 2MHz (8-DPSK, 0.1%BER) C/I 3MHz (8-DPSK, 0.1%BER) C/I image (8-DPSK, 0.1%BER) C/I image1MHz (8-DPSK, 0.1%BER) Intermodulation(BER0.1%) Input = -64dBm, n=5 Out-of-band blocking (CW, BER0.1%) 30MHz ~ 2000MHz 2000MHz ~ 2399MHz 2498MHz ~ 3000MHz 3000MHz ~ 12.75GHz Maximum input (GFSK, 0.1% BER)
* Normal Condition : 25, VDD=3.3V. Copyright. 2016. All Rights Reserved.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-39
-10
-27
-27
-10
-20
-85
-80
-80
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-70
-70
-70 11 0
-30
-40
-9
-20 13 0
-30
-40
-7
-20 21 5
-25
-33 0
-13
-
-
-
-
-
-
dBm dBm dBm dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
14 / 22 DOCUMENT No :
WC40134 10. Environment Tests Item Test Conditions Specifications Heat Load Test Humidity Load Test Heat Test Cold Test Initial values are measured at standard test condition. Leave samples in 603 for 965 hours, and in standard test condition for 30 minutes, then take measurements within 1 hour.
- Supply voltage : standard 5%
Initial values are measured at standard test condition. Leave samples in 403, 90 ~ 95% RH for 96 5 hours, and in standard test condition for 30 minutes, then take measurements within 1 hour.
- Supply voltage : standard + 5%
Initial values are measured at standard test condition. Leave samples in 702 for 96 5 hours, and in standard ambient for 1 hour with standard power Supply then take measurements within 1 hour. TX Power
: 4dB Max Initial values are measured at standard test condition. Leave samples in 202 for 96 5 hours, and Min Input Level
: 4dB Max in standard ambient for 1 hour with standard power Supply then take measurements within 1 hour. Temperature Shock Take measurements in standard test condition. Temp. : -40 ~ +85 Duration : 30 min Ramp-up & Ramp-down for 5 min Cycle : 200cycle. Initial value measure at standard test condition. Sweep rate : 1 single sweep/ minute Vibration Test Amplitude : 1.5 mm Frequency : 10-55Hz Duration : 1 Hours per direction (X,Y,Z) Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
15 / 22 DOCUMENT No :
WC40134 11. Pin Description Pin No. Pin Name I/O Pin Description 1 2 3 4 5 6 7 8 9 10 11 12 VCC I Power Supply 3.3V USB_DN_WiFi I/O WiFi USB Communication signal USB D-
USB_DP_WiFi I/O WiFi USB Communication signal USB D+
GND WOWL VCC WLAN_EN GND I I I I I Ground Wake On WLAN Power Supply 3.3V WiFI_RESET Ground USB_DN_BT I/O BT USB Communication signal USB D-
USB_DP_BT I/O BT USB Communication signal USB D+
GND BT_EN I I Ground BT_RESET Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
16 / 22 DOCUMENT No :
WC40134 12. Test method This is a conducted test method of WiFi RF performance. 1) Test Condition. LAN Cable LitePoint IQxel l e b a C F R r o t a u n a t t A Auto test Program Cable Power 5V TESCOM Shield Box
( TC-5910DP) Power Supply 2) Test Set-up List.
- Instrument : LitePoint IQxel
- Shield Box : Tescom TC-5910DP
- RF Cable : TESCOM 4011-0011
- Attenuator : Mini-Circuit 15542 10dB attenuator
- USB Cable, LAN Cable, Murata RF Cable : MXHT83QE3000 or MXHS83QE3000
- Power Supply 3) Test Flow
- Install the test set-up.
- Power OFF.
- Open the Shield box and install the DUT for test.
- Close the shield box.
- Power ON.
- Check the driver icon.
- Start testing.
#. Notes.
- Be careful that you can consider a RF cable LOSS. Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
17 / 22 DOCUMENT No :
WC40134 13. Mechanical Characteristics 1) Outline view Item Test Conditions Assembly No defects of wiring, soldering and assembling Appearance No dirt, rust, corrosion or foreign material 2) Appearance structure Item Test Conditions Dimension As assembly drawing Mounting As assembly drawing Weight 8 g Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
18 / 22 DOCUMENT No :
WC40134 14. Outline Drawing Copyright. 2016. All Rights Reserved. Jangeun YangHojin RohYeongtaek Kang'17. 09 13'17. 09 13'17. 09 13 DOCUMENT No :
WC40134 REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
19 / 22 15. Packing Information Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
20 / 22 DOCUMENT No :
WC40134 Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
21 / 22 DOCUMENT No :
WC40134 16. LG CI Specification. LG CI regulation LG CI print in Carton box Logo Ratio 1 : 0.65 Logo Type Color -- Black Planar figure of Carton box Copyright. 2016. All Rights Reserved. DOCUMENT No :
WC40134 REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
21 / 22 FCC and ISED Statements FCC Part 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Part 15.105 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. OEM Responsibilities to comply with FCC and Industry Canada Regulations The module has been certified for integration into products only by OEM integrators under the following condition:
- The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times.
- The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. As long as the two condition above is met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). End Product Labeling The module is labeled with its own FCC ID and IC Certification Number. If the FCC ID and ISED Certification Number are not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labeled in a visible area with the following:
Contains FCC ID: BEJ-WC1NP8 Contains ISED ID: 2703H- WC1NP8 Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
21 / 22 DOCUMENT No :
WC40134 RSS-GEN, Sec. 7.1.3 (licence-exempt radio apparatus) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux C NR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RF Exposure The antenna (or antennas) must be installed so as to maintain at all times a distance minimum of at least 20 cm between the radiation source (antenna) and any individual. This device may not be installed or used in conjunction with any other antenna or transmitter. l'exposition aux RF Lantenne (ou les antennes) doit tre installe de faon maintenir tout instant une distance minimum de au moins 20 cm entre la source de radiation (lantenne) et toute personne physique. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate thisequipment.Attention:
Les changements ou modifications de cet appareil non expressment approuv par le fabricant peuvent annuler votre droit utiliser cet quipement. tiquetage du produit final (IC) Le module BT111 est tiquet avec sa propre identification FCC et son propre numro de certification IC. Si lidentification FCC et le numro de certification IC ne sont pas visibles lorsque le module est install lintrieur dun autre dispositif, la partie externe du dispositif dans lequel le module est install devra galement prsenter une tiquette faisant rfrence au module inclus. Dans ce cas, le produit final devra tre tiquet sur une zone visible avec les informations suivantes :
Contient module metteur identification FCC ID : BEJ-WC1NP8 Contient module metteur ISED ID : 2703H-- WC1NP8 Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
21 / 22 DOCUMENT No :
WC40134 CE Statements Hereby, LG Electronics Inc. declares that the radio equipment type RF Module is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times. This device must not be collocated or operating in conjunction with any other antenna or transmitter. The host manufacturer integrating this module should be assessed total compliance with all essential requirements regarding this radio module. The host manufacturer has the responsibility that the host device should be compliance with all essential requirement of RED. Contact Address LG Electronics European Shared Service Center B.V. Krijgsman 1, 1186 DM Amstelveen, The Netherlands Copyright. 2016. All Rights Reserved. REG. DATE : 2017.11.01 S P E C I F I C A T I O N REV.NO : 2.0 REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 PAGE :
22 / 22 DOCUMENT No :
WC40134 Change History of Revision Revision Date Contents of Revision Change 1.0
'17.11.01 First release Remark H.J.Roh 2.0
'17.11.16 Remove 802.11AC specification(Customer request) H.J.Roh Copyright. 2016. All Rights Reserved.