Collider Membrane Keyboard QIG Battery and Charging Battery 4 days (2 hours per day) Bluetooth mode. Standby mode 3 months Red LED indicator will illuminate when battery is charging. RED LED indicator will shut off when battery is fully charged FN key backlight LED will flash repeatedly when battery is low Backlights will shut off after 5 minutes without use to conserve batter. After 30 minutes without use keyboard will enter standby mode and disconnect from Bluetooth. Press any key to exit standby mode and wake up the keyboard. Bluetooth Pairing Instructions 1. Set switch on the back of the keyboard to the ON position 2. Press and hold FN + P for 3-5 seconds 3. The P key will begin to flash repeatedly to indicate that the keyboard is ready to conn ect to a new device over Bluetooth. 4. On the device you wish to connect to, search for Bluetooth devices and select Collide r 65 to pair the device. 5. Once the keyboard has connected to the device, the P ley will stop flashing to indicat e successful Bluetooth pairing. 6. The keyboard can support Bluetooth connections for up to three devices. Press and hol d FN+P and Q/W/E to set up a connection to a new device. 7. Switch previously paired devices by quickly pressing FM + Q/W/E RGB Backlighting and Animation Effects FN+DEL FN+INS FN+PG UP FN+PG DN FN+
FN+
FN+
FN+
Cycle backlit modesBreathing. Cycle, Ra inbow. Sparkle, Glitter, Colorful, Wave, Ch ase, Ripple Cycle backlit modes - Static, Single-on, Sin gle-off. Rotate, Scroll, Roll, Fall, Colorful, Glitt er Breathing animation effect Running animation effect Cycle through single color mode Red, Green, Blue, Yellow, Cyan, Pink, White Expanding animation effect Custom mode. Six-are backlit color Blastoff animation effect FN+9 FN+
FN+
FN+PG UP FN+PG DN Hot Keys FN+WIN FN+Backspace FN+Q/W/E FN+Z/X/C FN + Tab Voice/Music/Noise controlled effect. FN+P GUP/PGDN to change sensitivity. Toggles direction of current animation effe ct Toggles direction of current animation effe ct Increases backlight animation speed Decreases backlight animation speed Custom Backlight Mode Instructions:
1. Press Fn + Z/X/C. Each key can store one backlight mode macro. 2. Press Fn+Tab. The blue LED indicator will flash repeatedly to indicate that backlight macro recording has begun. 3. Press the keys that you wish to set backlighting for. 4. Press Fn+ Tab again to stop backlight macro recording. Lock and unlock windows keys Hold 3 seconds to reset keyboard Switch Bluetooth profiles Switch custom backlighting profiles Backlight macro recording and saving FCC STATEMENTS:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditio ns:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. NOTE:
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an autlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.