Hyper-K Wireless Ultralight Gaming Mouse P/N 44028 Quick User Guide PACKAGE CONTENTS 1x Hyper-K Wireless Ultralight Gaming Mouse 1x USB Micro Receiver 1x USB Charging Cable 1x Quick User Guide ONLINE SUPPORT Monoprice is pleased to provide free online support. For order related issues, contact the Customer Service department through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com For technical issues, contact the Technical Support department through the online chat button on our website www.monoprice.com or by sending an email to tech@monoprice.com Check the website for support times and links. 1 CHARGING will flash red. 1. When the internal battery charge is low, the scroll wheel LED 2. Plug one end of the included USB Charging Cable into the mouse, then plug the other end into a USB power source. The scroll wheel LED will flash blue while charging is in progress. You can use the mouse while it is charging. 3. When charging is complete, the scroll wheel LED will change to a solid color corresponding to the selected DPI setting. WIRED/WIRELESS OPERATION To use the mouse in wired mode, simply plug one end of the included USB Charging Cable into the mouse, then plug the other end into an available USB port on your computer. Wired operation offers better and smoother performance than wireless mode. If the USB Micro Receiver is not plugged into your computer, the scroll wheel LED will flash blue during wired operation. The mouse is automatically in wireless mode when it is not plugged into your computer. For best results, plug the USB Micro Receiver into an available USB port on your computer, then ensure that the mouse and the Receiver are as close as possible to each other, with no obstructions to interfere with the wireless signal. DPI INDICATIONS When not indicating charging or wired operation status, the scroll wheel LED changes color, depending on the selected DPI setting. The following table shows the corresponding colors for each DPI setting. LED Color Red Green DPI Setting 800 1600 (default) 2 LED Color DPI Setting Blue Purple Yellow Cyan 3200 6400 12000 16000 PRODUCT OVERVIEW 3 SPECIFICATIONS P/N Sensor 44028 PixArt PAW 3335 DPI Settings 800, 1600, 3200, 6400, 12000, 16000 Scroll Wheel LED Colors Red, Green, Blue, Purple, Yellow, Polling Rate Acceleration Systems Button Life Up to 1000Hz Cyan 40g macOS 20 million presses Compatible Operating Windows XP/2000/Vista/7/8/10, Nominal Input Power 5 VDC, 30mA Battery Capacity 400mAh Operating Time Up to 50 hours without LED Charging Time About 3 hours Dimensions (LxWxH) 4.9" x 2.6" x 1.5" (126 x 66 x 39 mm) Weight 2.5 oz. (70g) REGULATORY COMPLIANCE Notice for FCC This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifying the equipment without Monoprice's authorization may result in the equipment no longer complying with FCC requirements 4 for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Notice for ISED Canada This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 5 Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio exempts de license. Lexploitation est authorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Monoprice, Dark Matter, the Dark Matter logo, and all Monoprice logos are trademarks of Monoprice Inc. USB Type-C and USB-C are registered trademarks of USB Implementers Forum. PixArt is a registered trademark of PixArt Imaging Inc. Microsoft, Windows, and Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Apple, Mac, and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. 6