BT-205 Bluetooth® Over Ear Headphone
P/N 41840
User's Manual
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these
safety warnings and guidelines. Please keep this manual in a safe place for future reference.
• This device is intended for indoor use only.
• Do not expose this device to water or moisture of any kind. Do not place drinks or
other containers with moisture on or near the device. If moisture does get in or on
the device, immediately turn it off and allow it to fully dry before reapplying power.
• Do not expose this device to excessively high temperatures. Do not place it in, on,
or near a heat source, such as a fireplace, stove, radiator, etc. Do not leave it in
direct sunlight.
• This device contains a Lithium-polymer battery. Dispose of this device only in
accordance with local, state, or federal regulations for electronic waste.
• Charge the battery before first use and at least once every three months.
• Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.
• This device has no user serviceable parts. Do not attempt to open, service, or
• Do not subject the product to extreme force, shock, or fluctuations in temperature
• Do not use these headphones while operating a motor vehicle, heavy equipment,
walking in traffic, or any other situation in which situational awareness is a key to
modify this device.
or humidity.
safety.
2
FEATURES:
• 40mm drivers
•
100Hz ~ 10kHz ±9dB frequency response
• Supports Bluetooth® 5 with the HSP, HFP, A2DP, and AVRCP profiles
• Up to 8 hours of talk/playback time
• Less than 4% Total Harmonic Distortion
• Supports playback of mp3 files on an inserted microSD™ card (card not included)
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering,
purchasing, and delivery experience is second to none. If you have any problem with your
order, please give us an opportunity to make it right. You can contact a Monoprice
Customer Service representative through the Live Chat link on our website
www.monoprice.com or via email at support@monoprice.com. Check the website for
support times and links.
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service for a
replacement.
1x BT-205 Bluetooth® headphones
1x 3.5mm audio cable
1x Micro USB charging cable
1x User's manual
3
PRODUCT OVERVIEW
1. MicroSD Card Slot: Insert a microSD™ card with mp3 audio tracks into the slot. The
BT-205 headphones support microSD cards up to 32GB. It supports mp3 files and
tracks can be in any subdirectory structure, but will be played sequentially. If a card
is inserted, it takes priority over the Bluetooth® connection.
2. LED Indicator: The LED indicates the status of the headphones. Refer to the LED
INDICATIONS section for details.
3. 3.5mm AUX In Jack: Plug the included 3.5mm audio cable into the jack to play audio
from a physical source, such as your phone. Whenever a cable is plugged into the
jack, Bluetooth® and microSD™ card playback is blocked.
4. Micro USB Charging Port: Plug the included Micro USB charging cable into the port,
then plug the other end into a USB power source (not included) to charge the
headphones. The battery should be charged before first use and at least once every
5. Microphone: The microphone allows you to make and receive phone calls using the
3 months.
BT-205 headphones.
4
6. Volume +/Next Track Button: Momentarily press the button to increase the volume
level. The headphones will beep when the maximum volume level is reached. Press
and hold the button for about 1.5 seconds to skip forward to the next track.
7. Multifunction Button: Press and hold the button for about 2 seconds to turn the
headphones on or off. Momentarily press the button the pause or resume playback.
Refer to the MULTIFUNCTION BUTTON section for full details.
8. Volume -/Previous Track Button: Momentarily press the button to reduce the
volume level. The headphones will beep when the minimum volume level is
reached. Press and hold the button for about 1.5 seconds to skip back to the
previous track.
CHARGING
The battery in the headphones should be fully charged before first use and at least once
every three months to keep it fresh and capable of holding a full charge. When the battery
charge level is low, the headphones will beep and the LED Indicator will illuminate red. If
the charge level gets too low, the headphone will beep and say Power Off, then
automatically turn off.
1.
If the headphones are powered on, press and hold the Multifunction Button for
about 2 seconds to turn them off. The LED Indicator will turn off and the
headphones will say Power Off.
2. Plug one end of the included Micro USB cable into the Micro USB Port on the
headphones, then plug the other end into a USB power source (not included). The
LED Indicator will illuminate red while charging is in progress.
3. Once charging is complete, the LED Indicator will turn off. A full charge can take up
to 2 hours to complete.
5
BLUETOOTH PAIRING
Perform the following steps to pair the BT-205 headphones with your mobile device.
1. Press and hold the Multifunction Button for about 2 seconds to turn the
headphones on. The headphones will say Power On.
2.
If the headphones have not been previously paired, they will automatically enter
Bluetooth® pairing mode, the LED Indicator will flash red and blue alternately, and
the headphones will say Pairing. If the headphones have been previously paired to
another device, press and hold the Multifunction Button for about 5 seconds to
enter Bluetooth pairing mode.
Note: The headphones will remain in Bluetooth pairing mode for about 12 seconds.
If you do not pair them within that time, press and hold the Multifunction Button
for about 5 seconds to re-enter Bluetooth pairing mode.
3. Open the Bluetooth settings on your mobile device, then scan for nearby Bluetooth
devices.
4. Locate and select the BT-205 entry.
5. If prompted for a passcode, enter 0000 (four zeroes). If pairing is successful, the
headphones will say Connected and the LED Indicator will illuminate solid blue.
Note: If they are powered on within range of a previously paired mobile device, the
headphones will automatically connect to that device.
PHONE CALLS
When an incoming call is detected, the headphones will automatically pause playback to
play the ring tone. Momentary press the Multifunction Button to answer the call.
Once the call is complete, momentarily press the Multifunction Button to terminate the
call. Audio playback will automatically resume.
6
MULTIFUNCTION BUTTON
Function
Button Operation
Result
With the headphones
powered on, press and hold
The headphones will say
Power On
the Multifunction Button for
Power On and the LED
about 2 seconds to turn the
Indicator will slowly blink blue.
Power Off
the Multifunction Button for
headphones on.
With the headphones
powered off, press and hold
about 2 seconds to turn the
headphones off.
With the headphones
powered on, press and hold
about 5 seconds to enter
Bluetooth® pairing mode.
Pairing
the Multifunction Button for
The headphones will say
Power Off and the LED
Indicator will flash red twice,
then turn off.
The headphones will say
Pairing and the LED Indicator
will flash red and blue
alternately.
The headphones will say
Connected and the LED
Indicator will illuminate solid
blue.
Pairing Complete
N/A
Play
Pause
Momentarily press the
The LED Indicator will
Multifunction Button.
illuminate solid blue.
Momentarily press the
The LED Indicator will
Multifunction Button.
illuminate solid blue.
Previous Track
/Previous Track Button for
Press and hold the Volume -
about 1.5 seconds.
The LED Indicator will
illuminate solid blue.
7
Function
Button Operation
Result
Next Track
Volume +/Next Track Button
Press and hold the
for about 1.5 seconds.
The LED Indicator will
illuminate solid blue.
The LED Indicator will
Momentary press the
illuminate solid blue. The
Decrease Volume
Volume -/Previous Track
headphones will beep when
Button.
the minimum volume level is
Increase Volume
Momentary press the
Volume +/Next Track Button.
reached.
The LED Indicator will
illuminate solid blue. The
headphones will beep when
the maximum volume level is
reached.
Answer a Call
When an incoming call is
The LED Indicator will
detected, momentarily press
illuminate solid blue and audio
the Multifunction Button to
playback will automatically
answer the call.
pause.
When the call is complete,
The LED Indicator will
Terminate a Call
momentarily press the
illuminate solid blue and audio
Multifunction Button to hang
playback will automatically
up.
resume.
Double press the Multifunction
MicroSD™/Bluetooth®
Button to toggle between
Toggle
MicroSD card and Bluetooth
radio playback.
The LED Indicator will flash
blue twice. When switching to
the Bluetooth radio, the
headphones will say
Connected.
8
LED INDICATIONS
Charging
Charging Complete
Low Battery Condition
Power On
Power Off
Function
LED Indicator
Solid red
Off
Solid red
Slowly blinks blue
Flashes red twice, then turns off
Bluetooth® Pairing Mode
Flashes red and blue alternately
Incoming Call
Solid blue
Bluetooth Connected
Slowly blinks blue
Bluetooth Disconnected
Solid blue
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
or through email by sending a message to tech@monoprice.com. Check the website for
support times and links.
9
Frequency Response
100Hz ~ 10kHz ±9dB
Supported Bluetooth Profiles
HSP, HFP, A2DP, AVRCP
Bluetooth Range
Up to 32 feet (10 meters)
41840
40mm
< 4%
5
BT-205
250mAh
Up to 8 hours
Up to 2 hours
5 VDC, 200mA
SPECIFICATIONS
Model
Driver Size
Total Harmonic Distortion
Bluetooth® Version
Bluetooth Pairing Name
Battery Capacity
Talk/Playback Time
Charging Time
Charging Power
REGULATORY COMPLIANCE
Notice for FCC
Caution
operation.
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
10
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
11