, 1C, 80g,
: 60mmx90mm
, TRUE WIRELES EARPHONES Contents Contents Auto Pairing Power ON/OFF Switch mode Charging Case
(L) Microphone
(R) MFB Multi-Function Button
(L)
(R) Earphones TRUE WIRELES EARPHONES 44882 Quick Start Guide USB Type-C Charging Cable 44882 Charging Case Indicator Type-C Interface 1 2 3 power on power o Or when earphones are out of charging case
(R)x 2sec Standby /Music mode Low Latency
(R)x 2sec Standby /Music mode Ambient mode
(L)x 2sec ANC mode
(L)x 2sec
(L)x 2sec Power on
(L)(R)x 4sec Switch device Power o
(L)/(R)x 10sec
(R)x 5sec Standby Pairing mode ready for new device
* Earphones will turn o automatically in 10 mins when did not connect to any device. Call Bluetooth 44882 Device 44882 Voice assistant
(L)x 4sec Receive an incoming call
(L)/ (R) x 1 Hang up the call
(L)/ (R) x 1 Reject Call
(L)/ (R) x 2sec Music Reset Specications FCC Warning
(L) (R) x 10sec Bluetooth Version V5.3 Bluetooth Prole A2DP/AVRCP/HFP/HSP/TMAP/PBP Audio Decodec aptX lossless audio This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Play music Pause music Previous Song Next Song Low Down Vol Add Up Vol
(L)/ (R) x 1
(L)/ (R) x 1
(L) x 3
(R) x 3
(L) x 2
(R) x 2 While both earphones are charging, press and hold the L and R MFB button for 10 s until the white lights ash. Then take out both eraphones, they will power on and enter pairing mode, which is available for new device connections. Charging
*Long press operation: When the long press time is up, you need to release in time to activate the corresponding function.
(except for power on/o operation USBC USBA
*Mono earphone: Take out either one side from the charging case and follow the steps to connect and control. Ensure the other earphone in charging case and close the cover securely. Battery Level LED Indictor 0%~35%
35%~70%
70%~99%
Orange light ashing White light ashing Green light ashing 100%
Green light on Frequency Range 20Hz-20KHz Distance 10m Driver 10mm Sensitivity 104 2dB Impedance 32 15%
Battery Capacity 40mAh 3.7V (each earphone), 350mAh, 3.7V (charging case) Input DC 5V / 1A Ouput DC 5V / 340mA (Max) Working Temperature -10~ +55 Any Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to This device complies with Industry Canada s licence-exempt IC Warning WARNING operate the equipment. RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference; and DO NOT use alcohol, paint thinners, detergent, shampoo, or other solvents for cleaning purposes. DO NOT intentionally immerse the earphones under water. DO NOT wash the earphones in washing machine. DO NOT expose the product to extremely high or low temperatures. DO NOT leave the product near candles, cooking burners and open ames. DO NOT disassemble the product in any way to avoid electric shock. Only charge the battery in accordance to the instructions provided by the company. DO NOT wash the charging box. CAUTION You must charge the earphone if it has not been used for more than 3 months. Risk of explosion increases if battery is replaced by an incorrect type. Dispose used batteries according to the instructions. INSTRUCTIONS Do not discard the used batteries along with household waste. Disposal of battery should comply with local environmental regulations. Note: This equipment has been tested and found to comply with
(2) This device must accept any interference, including interference the limits for a Class B digital device, pursuant to part 15 of the that maycause undesired operation of the device. FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada .Son fonctionnement est soumis aux deux conditions suivantes :
( 1 ) Ce dispositif ne peut causer d'interfrences ; et
( 2 ) Ce dispositif doit accepter toute interfrence , y compris les interfrences qui peuvent causer un mauvais fonctionnement de l'appareil. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 duCanada. The device has been evaluated to meet general RF exposure requirement The device can be used in portable exposure condition without
-Connect the equipment into an outlet on a circuit dierent restriction from that to which the receiver is connected.