all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Revised user manual | Users Manual | 400.31 KiB | ||||
1 |
|
User manual | Users Manual | 354.90 KiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Revised user manual | Users Manual | 400.31 KiB |
PRINTER OPERATING INSTRUCTIONS Model No. JT-H200PR Series Contents English Read Me First .... 1 1.Getting Started ... 2 2.Operation . 6 3.Appendix .. 8 Deutsch Einfhrung ... 11 1.Vorbereitung .. 12 2.Betrieb .... 16 3.Anhang ... 18 Read Me First Introduction Thank you for purchasing the JT-H200PR series Panasonic Printer. This manual describes the instructions for the printer. Please read this manual carefully before using this product. This Printer is equipped with Bluetooth wireless communication. [Class2 Device]
Whats in the Box?
1. Printer (Battery is not included.) 2. Operation Instructions manual (this book) Options 1. Battery Pack : JT-H100DP-50 2. Battery Charger : JT-H100CG-50/51 3. Wearable Case : JT-H200PR-C0 Other Equipment 1. Thermal Paper (Please ask our sales rep about the recommended Paper.) 1. Getting Started Precautions
[ Printer:JT-H200PR- ]
1. Avoid Radio Frequency Interference Do not place the printer near a television or radio receiver. 2. Avoid Stacking Do not place heavy objects on the printer. 3. Keep Small Objects Away Do not insert paper clips or other small objects into printer. There is the risk of heat, fire or explosion. 4. Keep Dry There is the risk of heat, fire or explosion. 5. Do Not Disassemble the Printer Do not attempt to disassemble the printer. There is the risk of heat, fire or explosion. 6. Do Not Touch Keep your hands away from the paper cutter and the thermal head. There is the danger of injury. 7. Do Not Use With Any Other Battery The printer is designed for the specified JT-H100DP-50 battery. Do not use the printer with any other battery. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions and local requirements. 8. Do Not Use DC Jack and Serial I/F DC jack and serial I/F is used for maintenance purposes by Panasonic service person only. Do not use them without a service person. If the equipment is inappropriately used, there is a risk of heat, fire or explosion. 9. Do Not Use In Aircrafts or Hospitals This printer includes Bluetooth wireless communication. Turn off the power switch in aircrafts or hospitals. Abnormal use may occur if used in close proximity to electric instruments or electro-medical apparatus.
<NOTE>
Do not open the cover while the printer is operating. Keep the thermal paper away from the direct exposure to light, high temperature, dust and humidity. Precautions
[ Battery Pack:JT-H100DP-50 ]
1. Avoid Heat Do not throw the battery pack into a fire or expose it to excessive heat. There is the risk of explosion. 2. Keep Articles Away Do not place the battery pack together with articles such as necklaces or hairpins when carrying or storing. There is the risk of heat, fire or explosion. 3. Keep Dry There is the risk of heat, fire or explosion. 4. Do Not Disassemble Do not insert sharp objects into the battery pack. Do not deform, disassemble, or modify the printer. There is the risk of heat, fire or explosion. 5. Do Not Short Do not short the positive (+) and negative(-) contact. There is the risk of heat, fire or explosion. 6. Avoid Extreme Heat, Cold, and Direct Sunlight Do not charge, use or leave the battery pack for extended periods where it will be exposed to direct sunlight or in a hot, or cold environment. 7. Do Not Put Into a Microwave Oven Do not put the battery pack into a microwave oven or a pressurized chamber. There is the risk of explosion. 8. Do Not Use With Any Other Device The battery pack is designed for the specified JT-H200PR- printer and JT-H100CG-50/51 charger. Do not use the battery with any other device. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions and local requirements. 9. Stop Using Should the battery emit an abnormal odor, become hot to the touch, become discolored, change shape, or become in any way different, remove it from the printer and stop using it.
<NOTE>
Please charge the battery pack for a minium of 100mins before first use. Please ask our sales rep about the dispose method of the battery. If the battery pack is not going to be used for a long period, charge or discharge the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place. Precautions
[ Battery Charger:JT-H100CG-50/51 ]
1. Keep Small Objects Away Do not insert paper clips or other small objects into charger. There is the risk of heat or fire. 2. Do Not Disassemble the Charger Do not attempt to disassemble the charger. There is the risk of heat or fire. 3. Keep Dry There is the risk of heat or fire. 4. Do Not Short Do not short the positive(+) and negative(-) contact. There is the risk of heat or fire. 5. Do Not Use With Any Other Battery The charger is designed for the specified JT-H100DP-50 battery. Do not use the charger with any other battery. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions and local requirements. 6. Do Not Touch the Plug with Wet Hands. There is the risk of electric shock. 7. Do Not Touch the Charger During a Lightning. There is the risk of electric shock. 8. Be Certain to Plug Fully Into the Outlet. There is the risk of electric shock or fire. 9. When Unplugging, Make Sure to Hold the Body of the Plug . If the power strip is damaged, there is a risk of electric shock, short circuit or fire. 10. Do Not Use a Damaged Power-code or Plug. There is the risk of electric shock or fire. 11. Clean the Dust off the Plug, Periodically. There is the risk of heat or fire.
<NOTE>
To prolong the life of battery pack, please remove it from the charger within 24 hours after charging is complete. Please charge the battery in 5 to 40 degrees temperature. Name of each part & function Paper Out Paper Cover Lever Power Switch IrDA I/F Status LED Status Receiving Feed Receiving LED Feed
(Press button to feed paper) Paper Cover Connector Cover Battery Cover Lever
(DC Jack) *
(Serial I/F) *
* Maintenance purpose only Signal Part Status LED Receiving LED Indicator Off Green Light Status Normal status. 1. Power-on (5 seconds lightning), 2. Power-off (0.5 second lightning) Orange Light Detect battery capacity low; printable. Red Light Detect Low voltage; not printable. 1. The cover of paper is open. 2. The paper is empty. 3. Others, the printer is out of order. Red Blink Green Blink In communications. 2. Operation Battery Installation
<Open Battery Cover>
1) Slide Battery Cover Lever 2) Slide and open Battery Cover 3) Battery Cover opened 4) Slide Battery in fully 2) 1)
<Close Battery Cover>
1) Close Battery Cover 2) Slide Battery Cover 3) Slide Battery Cover Lever
<NOTE>
If the cover comes open, fit it as indicated. 3) 1) 4) 3) 2)
* Slide the battery cover into the metal bar, as the circle highlight in the image to the left. Paper Installation 1) Slide Paper Cover Lever 2) Open Paper Cover 1) 2) 3) Install Paper (Paper must be tight and free from dust/sand) 4) Close Paper Cover (Make sure Cover is closed completely) 4) 4) 3) Paper Charging Battery 1) Put Battery and slide to direction 2) When charging, Charger LED blinks green. When charging is complete, Charger LED light stays green. Charging work is limited to one Battery at any one time. When charging is finished in one Slot, charging in another Slot automatically starts.
* Charging Time: approx. 2H/ Battery 3) Remove Battery from the Charger after Charging. Charger LED (Slot2)
:Green Power LED :Red Charger LED (Slot1)
:Green 3. Appendix Troubleshooting Symptom No Power in Printer 1.Has the battery fully inserted?
Possible Cause 2.Is the power turned on?
1.Is the power turned on?
2.Is the paper set correctly?
3.Are the LED signals lighting red?
4.Is the LED blinking red?
5. Are you using Bluetooth?
6.Are you using IrDA?
1.Isnt the thermal head dirty?
2.Are you using the recommended paper?
Noting is printing The print is faint The orange or red LED is lighting even after charging battery. Action 1.Charge the battery pack. 2.Turn on power. 1.Turn on power. 2.Check the print paper setting. 3.Charge the battery. 4.Make sure that the paper is setting properly, or close the paper cover completely. 5.Reduce the distance of the device and the printer. 6. Adjust the angle of IrDA, or clean up the window, or avoid direct sunlight. 1.Clean it up. 2.Check the paper. The life cycle of the battery pack may have expired. Replace the battery pack with a new one. How to care How to clean up the thermal head and the rubber roller. 1) Push the paper cover lever to open the paper cover. 2) Wipe off any dust/dirt using the cotton swab with a small amount of alcohol (ethanol).
(Do not use thinner, benzene series or kerosene series.) 3) Close the cover after alcohol is dry. Thermal head Rubber roller Items Mechanical Head Paper Communication Size & Weight Environment Items Battery Cell Life time Size & Weight Environment Items LED Indication Charging Function Power Environment Size & Weight Specifications
[ Printer:JT-H200PR- ]
Printing Function Font Type Life Time Head Description Specifications Printing Printing Speed Printing Width Character font Line Thermal Max. 80mm/Sec (Panasonic Test Standard) 48mm (384 dots/ line) 12 x 24 dots (standard) Alpha-numeric, Barcode, 2D code Equal or more than 1 X 10 pulse Equal or more than 25Km(Recommended paper 58mm +0 - 1mm Outside (outside surface; thermal) Bluetooth V1.1 (Class 2) 2.4GHz IrDA V1.2 (Proprietary) Approx.W88mmXL102mmX D43mm Approx. 280g (without paper) Paper width Roll direction Type1 Type2 Size Weight Operation temperature 0 to 40 degree centigrade (without paper)
[ Battery Pack:JT-H100DP-50 ]
Description Type Rated capacity Specifications Lithium ion Battery 7.2V 1,150mAh (standard discharging) 300 times discharge/charge or 1year *1 Approx. W70mmXL38mm X D20mm Approx. 90g Size Weight Operation temperature 0 to 40 degree centigrade
*1: The battery is a consumable item therefore consumption and life time is just an indication and may vary depending on usage and environment conditions.
[ Battery Charger:JT-H100CG-50/51*2 ]
Specifications Description Power LED (Red) Charger LED
(Green: X 2 (Slot)) Charging time Charging current Power-on : on 1) Charging, Output short : 1Hz blinking 2)Complete charging : on 3) Abnormal temperature, No good mode : off Charging 2-battery Approx. 4 hours *3 Approx.1,200mA(10 to 40degree centigrade) Approx. 840mA(0 to 10degree centigrade) AC100V-240V50/60Hz Operation temperature 0 to 40 degree centigrade Size Approx.W94mmXL122mmXD35mm
(without cable Approx. 270g Weight
*2: JT-H100CG-50; Europe version (excluding UK) JT-H100CG-51; UK version
*3: Charging is parallel and 1 slot only. (Automatical slot change) Charging time varies depending on battery comsumption and temperature. Warranty Policy The warranty period and what is covered are according to the application, contract or distributor. Please ask our sales rep.
<NOTE>
The out of term warranty is as follows:
- Any secondary damages as for the loose of Printing paper, data or business chances.
- Any damages by user including dropping, water contact or any other wrong use, other than the purpose designed for. Compliance Notice Hereby, we declare that this printer is in compliance with the essential requirements and other relevant provision of Directive 1999/5/EC. Comliance Notice CE Mark This equipment is in conformance with the reuirements of European Council Directive listed below:
- R&TTE Directive 1995/5/EC This notice is based upon compliance of the product to the following standards:
- EN 60950 :2000;
- EN 300 328 :2003;
- EN 301 489-1 :2002; EN 301 489-17 :2002 Einfhrung Einfhrung Vielen Dank, dass Sie sich fr den Kauf eines Panasonic-Druckers der Baureihe JT-H200PR entschieden haben. Dieses Handbuch beschreibt die Bedienung des Druckers. Bitte lesen Sie diese Bedienungsanweisung vor dem Gebrauch dieses Produktes sorgfltig durch. Dieser Drucker ist mit Bluetooth fr drahtlose Kommunikation ausgerstet.
[Gert der Klasse 2]
Was ist im Karton?
1. Drucker (Batterie nicht inbegriffen) 2. Bedienungsanleitung (dieses Handbuch) Optionen 1. Batterie: JT-H100DP-50 2. Batterieladegert: JT-H100CG-50/51 3. Tragetasche: JT-H200PR-C0 Sonstige Ausrstungen 1. Thermalpapier
(Bitte fragen Sie Panasonic hinsichtlich der empfohlenen Papiersorte.) 1. Vorbereitung Vorsichtsmanahmen
[ Drucker :JT-H200PR- ]
1. Strende Radiofrequenzen vermeiden Den Drucker nicht in der Nhe eines Fernseh- oder Radiofunkgerts aufstellen. 2. Nicht belasten Keine schweren Gegenstnde auf den Drucker legen. 3. Kleine Gegenstnde fernhalten Keine Broklammern oder andere kleine Gegenstnde in den Drucker stecken. 4. Trocken halten Andernfalls besteht eine Hitze-, Feuer- oder Explosionsgefahr. 5. Den Drucker nicht zerlegen Nicht versuchen den Drucker zu zerlegen. Es besteht Hitze-, Feuer- oder Explosionsgefahr. 6. Nicht berhren Das Papiermesser und den Thermodruckkopf nicht berhren. Es besteht Verletzungsgefahr. 7. Keine anderen Batterien verwenden Der Drucker ist fr den Einsatz mit der vorgeschriebenen Batterie JT-H100DP-50 ausgelegt. Den Drucker mit keiner anderen Batterie betreiben. VORSICHT! Es besteht Explosionsgefahr, wenn die Batterie gegen einen falschen Typ ausgewechselt wird. Leere Batterien entsprechend den Anweisungen und rtlichen Vorschriften entsorgen. 8. Die Stromversorgungs-Buchse und serielle Schnittstelle nicht benutzen Die Stromversorgungsbuchse und die serielle Schnittstelle sind ausschlielich fr Wartungszwecke durch Panasonic-Personal vorgesehen. Sie drfen nur in Anwesenheit des Service-Personals benutzt werden. Bei unsachgemer Nutzung des Gerts besteht Hitze-, Feuer- oder Explosionsgefahr. 9. Nicht in Flugzeugen und Krankenhusern benutzen Dieser Drucker ist mit Bluetooth fr drahtlose Kommunikation ausgerstet. Den Drucker in Flugzeugen und Krankenhusern ausschalten. Die Verwendung in der Nhe von elektrischen Gerten bzw. medizinischen Ausrstungen kann Fehlfunktionen zur Folge haben.
<Hinweis>
Den Deckel des Druckers nicht whrend des Druckbetriebs ffnen. Das Thermopapier nicht direkter Sonneneinstrahlung, hohen Temperaturen, Staub und Feuchtigkeit aussetzen. Vorsichtsmanahmen
[ Batterie:JT-H100DP-50 ]
1. Wrmeeinfluss vermeiden Die Batterie nicht ins Feuer werfen oder extremer Hitze aussetzen. Es besteht Explosionsgefahr. 2. Von anderen Gegenstnden fernhalten Die Batterie nicht mit Gegenstnden wie Halsketten oder Haarnadeln zusammen tragen oder lagern. Es besteht Hitze-, Feuer- oder Explosionsgefahr. 3. Trocken halten Es besteht Hitze-, Feuer- oder Explosionsgefahr. 4. Nicht zerlegen Keine scharfen Gegenstnde in die Batterie stecken. Nicht versuchen den Drucker zu zerlegen oder zu modifizieren. Es besteht Hitze-, Feuer- oder Explosionsgefahr. 5. Nicht kurzschlieen Plus (+) und Minus (-) Kontakte nicht kurzschlieen. Es besteht Hitze-, Feuer- oder Explosionsgefahr. 6. Extreme Hitze, Klte, und direkte Sonneneinstrahlung vermeiden Die Batterie nicht fr lngere Zeit bei direkter Sonneneinstrahlung, bzw. in heier oder kalter Umgebung laden, benutzen oder aufbewahren. 7. Nicht in Mikrowellenofen legen Die Batterie nicht in einen Mikrowellenofen oder eine Druckkammer legen. Es besteht Explosionsgefahr. 8. Nicht mit anderen Gerten verwenden Die Batterie ist fr den spezifizierten Drucker JT-H200PR-** und das Ladegert JT-H100CG-
50/51 ausgelegt. Die Batterie mit keinem anderen Gert verwenden. VORSICHT! Es besteht Explosionsgefahr, wenn die Batterie gegen einen falschen Typ ausgewechselt wird. Leere Batterien entsprechend den Anweisungen und rtlichen Vorschriften entsorgen. 9. Verwendungsverbot Falls von der Batterie ein starker Geruch ausstrmt, zu hei wird, sich verfrbt, verformt oder sonst wie verndert, ist sie zu entfernen und darf nicht mehr verwendet werden.
<Hinweis>
Bitte laden Sie die Batterie vor dem Erstgebrauch mindestens 100 Minuten lang auf. Bitte konsultieren Sie unseren Handelsvertreter hinsichtlich Batterieentsorgung. Falls die Batterie ber einen lngeren Zeitraum nicht verwendet wird, laden bzw. entladen Sie sie solange, bis der Reststrom in der Batterie 30 % bis 40 % betrgt, und bewahren Sie sie danach an einem khlen und trockenen Ort auf. Vorsichtsmanahmen
[ Batterieladegert :JT-H100CG-50/51 ]
1. Kleine Gegenstnde fernhalten Keine Broklammern oder andere kleine Gegenstnde in das Ladegert stecken. Es besteht Hitze-, Feuer- oder Explosionsgefahr. 2. Das Ladegert nicht zerlegen Nicht versuchen, das Ladegert zu zerlegen. Es besteht Hitze-, Feuer- oder Explosionsgefahr. 3. Trocken halten Es besteht Hitze-, Feuer- oder Explosionsgefahr. 4. Nicht kurzschlieen Plus (+) und Minus (-) -Kontakte nicht kurzschlieen. Es besteht Hitze-, Feuer- oder Explosionsgefahr. 5. Nicht mit anderen Batterien verwenden Das Batterieladegert ist fr die spezifizierte Batterie JT-H100DP-50 ausgelegt. Das Ladegert mit keiner anderen Batterie verwenden. VORSICHT! Es besteht Explosionsgefahr, wenn die Batterie gegen einen falschen Typ ausgewechselt wird. Leere Batterien entsprechend den Anweisungen und rtlichen Vorschriften entsorgen. 6. Den Stecker nicht mit nassen Hnden berhren Es besteht Elektroschockgefahr. 7. Das Ladegert whrend eines Gewitters nicht berhren. Es besteht Elektroschockgefahr. 8. Darauf achten, dass der Stecker ganz in die Steckdose hineingesteckt wird. Es besteht Elektroschock- bzw. Feuergefahr. 9. Darauf achten, dass beim Herausziehen der Stecker angefasst wird. Wenn das Netzkabel beschdigt ist, besteht Elektroschock-, Kurzschlu- bzw. Feuergefahr. 10. Keine beschdigten Netzkabel bzw. stecker verwenden Es besteht Elektroschock- bzw. Feuergefahr. 11. Staub auf dem Netzstecker regelmig entfernen. Es besteht Hitze- bzw. Feuergefahr.
<Hinweis>
Um die bestmgliche Lebensdauer der Batterie zu erzielen, ist diese innerhalb von 24 Stunden nach beendigtem Aufaden aus dem Ladegert zu entfernen. Die Batterie bitte bei Umgebungstemperaturen von 5 bis 40 Grad laden. Bezeichnung und Funktion der Teile EIN /AUS Schalter Papierausgabe IrDA-
Schnittstelle Sicherung der Papierabdeckung Feed Status-LED Status Receiving Empfangs-LED
(Fr Papiervorschub Knopf drcken) Papierabdeckung Steckerabdeckung Batteriefachabdeckung
* Nur fr Wartungszwecke Element Status-
LED Anzeige Aus Grnes Licht Status Normal 1. Strom ein (leuchtet 5 Sekunden), 2. Strom aus (leuchtet 0.5 Sekunden) Rotes Licht Oranges Licht Erfasste Batteriespannung niedrig, drucken mglich Erfasste Batteriespannung niedrig, drucken nicht mglich 1. Die Papierabdeckung ist offen . 2. Kein Papier im Drucker. 3. Sonstiges, der Drucker ist defekt. Rotes Licht blinkt Empfangs-
LED Grnes Licht blinkt Whrend der Kommunikation 2. Betrieb Einsetzen der Batterie
<Batteriefachabdeckung ffnen>
1) Die Sicherung der Batteriefachabdeckung nach vorn schieben. 2) Die Batteriefachabdeckung nach oben ziehen. 3) Die Batteriefachabdeckung ffnen. 4) Die Batterie einsetzen. 2) 1) 3) 4) 3) 2) 1)
<Batteriefachabdeckung schlieen>
1) Die Batteriefachabdeckung zuklappen. 2) Die Batteriefachabdeckung nach unten schieben. 3) Die Sicherung der Batteriefachabdeckung nach hinten schieben.
<Hinweis>
Wenn sich die Batteriefachabdeckung vom Gehuse lsen sollte, wie angegeben wieder einsetzen.
* Die Batteriefachabdeckung ber den im Bild links eingekreisten Drehanker schieben. Papier einsetzen 1) Die Sicherung der Papierabdeckung nach hinten schieben. 2) Die Papierabdeckung ffnen. 1) 2) 3) Papier einlegen (das Papier mu fest aufgerollt und frei von Staub/Sand sein). 4) Die Papierabdeckung schlieen (darauf achten, da die Abdeckung vollstndig geschlossen wird.) 4) 4) 3) Papier Batterie aufladen 1) Die Batterie einsetzen und in Pfeilrichtung hineinschieben. 2) Whrend des Aufladens blinkt die grne Leuchtdiode. Nach beendigtem Aufladen geht die Ladeleuchte in Dauerlicht ber. Das Ladegert ldt immer nur eine Batterie auf. Wenn das Aufladen im Ladefach eins beendet ist, beginnt automatisch das Aufladen in Ladefach zwei. Ladedauer: ca. 2 Std./Batterie 3) Nach dem Aufladen die Batterie aus dem Ladegert entfernen. LED Aufladen (Ladefach 2) Betriebs-LED, rot LED Aufladen (Ladefach 1) 3. Anhang Strungsbeseitigung Problem Mgliche Ursachen Gegenmanahmen Keine Spannung am Drucker Es wird nichts gedruckt 1.Ist die Batterie korrekt eingesetzt?
2.Ist der Drucker eingeschaltet?
1.Ist der Drucker eingeschaltet?
2.Ist das Papier korrekt eingesetzt?
3.Leuchten die LEDs rot?
4.Blinkt das LED rot?
5. Verwenden Sie Bluetooth?
6. Verwenden Sie IrDA?
1.Ist der Druckkopf verschmutzt?
2.Verwenden Sie das vorgeschriebene Papier?
Die Gebrauchsdauer der Batterie ist erreicht. Schwaches Druckbild Das orangefarbene LED leuchtet auch nach dem Aufladen der Batterie Instandhaltung 1.Die Batterie aufladen. 2.Den Drucker einschalten. 1. Den Drucker einschalten. 2. Die Papiereinstellung berprfen. 3. Die Batterie aufladen. 4. berprfen, ob das Papier korrekt eingesetzt oder die Papierabdeckung vollstndig geschlossen ist. 5. Den Abstand zwischen Gert und Drucker verringern. 6. Den Winkel der IrDA Gerte zueinander ndern. Fenster reinigen, oder direkte Sonneneinstrahlung verhindern. 1. Den Druckkopf reinigen. 2. Die Papiersorte berprfen. Die Batterie durch eine neue Ersetzen. Reinigen des Druckkopfes und der Gummiwalze 1) Die Sicherung nach hinten schieben und die Papierabdeckung ffnen. 2) Staub/Schmutz mit einem weichen, leicht mit Alkohol (Ethanol) getrnkten Tuch abwischen.
(Verdnner, Benzol oder Petroleum darf nicht verwendet werden.) 3) Wenn der Alkohol verdunstet ist, die Abdeckung wieder schlieen. Druckkopf Gummiwalze Technische Daten
[ Drucker:JT-H200PR- ]
Position Bezeichnung Drucken Mechanik Druckgeschwindigkeit Max. 80mm/Sek. (Panasonic Test Standard) Druckbreite Zeichenfont Font-Typ Druckkopf Technische Daten Thermal-Zeilendruck Druckfunktion Lebensdauer Druckkopf 48mm (384 Punkte/Zeile) 12 x 24 Punkte (Standard) Alpha-numerisch, Barcode, 2D Code Grer gleich als 1 X 10 Impulse Grer gleich 25Km
(bei Nutzung des empfohlenen Papiers) 58mm +0 - 1mm Nach auen (Auenflche thermal) Bluetooth V1.1 (Klasse 2) 2.4GHz IrDA V1.2 (Proprietr) Ca. B88mm x L102mm x H43mm Ca. 280g (ohne Papier mit Akku) 0 bis 40 Grad Celsius (ohne Papier) Papier Kommunikation Paperbreite Abrollrichtung Typ 1 Typ 2 Abmessungen Gewicht Betriebstemperatur Abmessungen und Gewicht Umgebung
[ Batterie:JT-H100DP-50 ]
Bezeichnung Position Typ Batteriezelle Nennleistung Technische Daten Lithium-Ion-Batterie 7.2V 1,150mAh (Normalentladung) 300 Ent-/Aufladungen oder 1 Jahr *1 Ca. B70mm x L38mm x D20mm Ca. 90g 0 bis 40 Grad Celsius Abmessungen Gewicht Betriebstemperatur Gebrauchsdauer Abmessungen und Gewicht Umgebung
*1 Da die Batterie ein Verbrauchsgegenstand ist, sind die Angaben fr Verbrauch und Gebrauchsdauer nur ungefhre Werte und knnen in Abhngigkeit von den Betriebs- und Umgebungsbedingungen unterschiedlich sein.
[ Batterieladegert :JT-H100CG-50/51*2 ]
Position LED-Anzeige Bezeichnung Betriebs-LED (rot) LED Aufladen (grn x 2
(Ladefach)) Technische Daten Spannung ein, aus 1) Aufladen, Ausgang kurz: blinkt 1Hz 2) Aufladen beendet: leuchtet 3) Abnormale Temperatur, Strung: aus 2 Batterien aufladen: ca. 4 Stunden Ca. 1'200 mA (10 bis 40 Grad Celsius) Ca. 840 mA (0 bis 10 Grad Celsius) 100V 240V Ws, 50/60 Hz Ca. B94mm x L122mm x H35mm Ca. 270g 0 bis 40 Grad Celsius Aufladen Funktion Ladedauer Ladestrom Netzspannung Abmessungen und Gewicht Umgebung
*2 JT-H100CG-50: Europamodell (auer GB); JT-H100CG-51: GB-Modell
*3 Das Aufladen erfolgt parallel fr je ein Ladefach (automatischer Ladefachwechsel) Die Ladedauer ist abhngig von Verbrauch und Temperatur unterschiedlich. Abmessungen Gewicht Betriebstemperatur Garantie Garantiedauer und Deckungsumfang gelten entsprechend des Kaufvertrages. Bitte konsultieren Sie unseren Handelsvertreter.
<Hinweis>
Von der Garantie ausgeschlossen sind:
- Jegliche Folgeschden wie Verlust von Papier, Daten oder Geschftsausflle.
- Jegliche durch den Benutzer verursachten Schden wie Fallenlassen, Wasserkontakt oder Nutzung zu anderen Zwecken als dem Auslegungszweck. Konformittserklrung Wir erklren hiermit, dass dieser Drucker den grundlegenden Anforderung und sonstigen relevanten Vorgaben gem Richtlinie 1999/5/EC entspricht. Konformittserklrung CE-Kennzeichen Dieses Gert entspricht den Anforderungen der unten aufgefhrten Richtlinie der Europischen Gemeinschaft:
-R&TTE-Richtlinie 1999/5/EC Diese Erklrung basiert auf der Konformitt des Produktes mit folgenden Standards:
-EN 60950 : 2000
-EN 300 328 : 2003
-EN 301 489-1 : 2002; EN 301 489-17: 2002 For USA Federal communications commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure requirements This device complies with RF exposure requirements for an uncontrolled environment. This device and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter. For CANADA This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled Digital Apparatus", ICES-003 of the Department of Communications."
Cet appareil numrique respecte les limites de bruits radiolectriques applicables aux appareils numriques de Classe B prescrites dans la norme sur le matriel brouilleur : Appareils Numriques", NMB-003 dicte par le ministre des Communications. Memo This manual is copyrighted by Matsushita Electric Industrial Co.,Ltd. with all right reserved. Prouct may be subject to export control regulations. Specifications and manuals are subject to change without notice. Panasonic is aregistered of trademark of Matsushita Electric Industrial Co.,Ltd. Panasonic Marketing Europe(Germany) Phone:0611-235-343 Fax:0611-235-395 Panasonic Deutschland GmbH Phone:040-8549-0 Fax:040-8549-2500 Panasonic Business Systems U.K. Phone:01344-476514 Fax:01344-853705 Government & Corporate Systems Business Unit Matsushita Electric Industrial Co., Ltd. Phone:045-544-3447 Fax:045-544-3448 2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Printed in Japan J8Q57861B4
1 | User manual | Users Manual | 354.90 KiB |
PRINTER OPERATING INSTRUCTIONS Model No. JT-H200PR Series Contents English Read Me First .... 1 1.Getting Started ... 2 2.Operation . 6 3.Appendix .. 8 Deutsch Einfhrung ... 11 1.Vorbereitung .. 12 2.Betrieb .... 16 3.Anhang ... 18 Read Me First Introduction Thank you for purchasing the JT-H200PR series Panasonic Printer. This manual describes the instructions for the printer. Please read this manual carefully before using this product. This Printer is equipped with Bluetooth wireless communication. [Class2 Device]
Whats in the Box?
1. Printer (Battery is not included.) 2. Operation Instructions manual (this book) Options 1. Battery Pack : JT-H100DP-50 2. Battery Charger : JT-H100CG-50/51 3. Wearable Case : JT-H200PR-C0 Other Equipment 1. Thermal Paper (Please ask our sales rep about the recommended Paper.) 1. Getting Started Precautions
[ Printer:JT-H200PR- ]
1. Avoid Radio Frequency Interference Do not place the printer near a television or radio receiver. 2. Avoid Stacking Do not place heavy objects on the printer. 3. Keep Small Objects Away Do not insert paper clips or other small objects into printer. There is the risk of heat, fire or explosion. 4. Keep Dry There is the risk of heat, fire or explosion. 5. Do Not Disassemble the Printer Do not attempt to disassemble the printer. There is the risk of heat, fire or explosion. 6. Do Not Touch Keep your hands away from the paper cutter and the thermal head. There is the danger of injury. 7. Do Not Use With Any Other Battery The printer is designed for the specified JT-H100DP-50 battery. Do not use the printer with any other battery. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions and local requirements. 8. Do Not Use DC Jack and Serial I/F DC jack and serial I/F is used for maintenance purposes by Panasonic service person only. Do not use them without a service person. If the equipment is inappropriately used, there is a risk of heat, fire or explosion. 9. Do Not Use In Aircrafts or Hospitals This printer includes Bluetooth wireless communication. Turn off the power switch in aircrafts or hospitals. Abnormal use may occur if used in close proximity to electric instruments or electro-medical apparatus.
<NOTE>
Do not open the cover while the printer is operating. Keep the thermal paper away from the direct exposure to light, high temperature, dust and humidity. Precautions
[ Battery Pack:JT-H100DP-50 ]
1. Avoid Heat Do not throw the battery pack into a fire or expose it to excessive heat. There is the risk of explosion. 2. Keep Articles Away Do not place the battery pack together with articles such as necklaces or hairpins when carrying or storing. There is the risk of heat, fire or explosion. 3. Keep Dry There is the risk of heat, fire or explosion. 4. Do Not Disassemble Do not insert sharp objects into the battery pack. Do not deform, disassemble, or modify the printer. There is the risk of heat, fire or explosion. 5. Do Not Short Do not short the positive (+) and negative(-) contact. There is the risk of heat, fire or explosion. 6. Avoid Extreme Heat, Cold, and Direct Sunlight Do not charge, use or leave the battery pack for extended periods where it will be exposed to direct sunlight or in a hot, or cold environment. 7. Do Not Put Into a Microwave Oven Do not put the battery pack into a microwave oven or a pressurized chamber. There is the risk of explosion. 8. Do Not Use With Any Other Device The battery pack is designed for the specified JT-H200PR- printer and JT-H100CG-50/51 charger. Do not use the battery with any other device. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions and local requirements. 9. Stop Using Should the battery emit an abnormal odor, become hot to the touch, become discolored, change shape, or become in any way different, remove it from the printer and stop using it.
<NOTE>
Please charge the battery pack for a minium of 100mins before first use. Please ask our sales rep about the dispose method of the battery. If the battery pack is not going to be used for a long period, charge or discharge the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place. Precautions
[ Battery Charger:JT-H100CG-50/51 ]
1. Keep Small Objects Away Do not insert paper clips or other small objects into charger. There is the risk of heat or fire. 2. Do Not Disassemble the Charger Do not attempt to disassemble the charger. There is the risk of heat or fire. 3. Keep Dry There is the risk of heat or fire. 4. Do Not Short Do not short the positive(+) and negative(-) contact. There is the risk of heat or fire. 5. Do Not Use With Any Other Battery The charger is designed for the specified JT-H100DP-50 battery. Do not use the charger with any other battery. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions and local requirements. 6. Do Not Touch the Plug with Wet Hands. There is the risk of electric shock. 7. Do Not Touch the Charger During a Lightning. There is the risk of electric shock. 8. Be Certain to Plug Fully Into the Outlet. There is the risk of electric shock or fire. 9. When Unplugging, Make Sure to Hold the Body of the Plug . If the power strip is damaged, there is a risk of electric shock, short circuit or fire. 10. Do Not Use a Damaged Power-code or Plug. There is the risk of electric shock or fire. 11. Clean the Dust off the Plug, Periodically. There is the risk of heat or fire.
<NOTE>
To prolong the life of battery pack, please remove it from the charger within 24 hours after charging is complete. Please charge the battery in 5 to 40 degrees temperature. Name of each part & function Paper Out Paper Cover Lever Power Switch IrDA I/F Status LED Status Receiving Feed Receiving LED Feed
(Press button to feed paper) Paper Cover Connector Cover Battery Cover Lever
(DC Jack) *
(Serial I/F) *
* Maintenance purpose only Signal Part Status LED Receiving LED Indicator Off Green Light Status Normal status. 1. Power-on (5 seconds lightning), 2. Power-off (0.5 second lightning) Orange Light Detect battery capacity low; printable. Red Light Detect Low voltage; not printable. 1. The cover of paper is open. 2. The paper is empty. 3. Others, the printer is out of order. Red Blink Green Blink In communications. 2. Operation Battery Installation
<Open Battery Cover>
1) Slide Battery Cover Lever 2) Slide and open Battery Cover 3) Battery Cover opened 4) Slide Battery in fully 2) 1)
<Close Battery Cover>
1) Close Battery Cover 2) Slide Battery Cover 3) Slide Battery Cover Lever
<NOTE>
If the cover comes open, fit it as indicated. 3) 1) 4) 3) 2)
* Slide the battery cover into the metal bar, as the circle highlight in the image to the left. Paper Installation 1) Slide Paper Cover Lever 2) Open Paper Cover 1) 2) 3) Install Paper (Paper must be tight and free from dust/sand) 4) Close Paper Cover (Make sure Cover is closed completely) 4) 4) 3) Paper Charging Battery 1) Put Battery and slide to direction 2) When charging, Charger LED blinks green. When charging is complete, Charger LED light stays green. Charging work is limited to one Battery at any one time. When charging is finished in one Slot, charging in another Slot automatically starts.
* Charging Time: approx. 2H/ Battery 3) Remove Battery from the Charger after Charging. Charger LED (Slot2)
:Green Power LED :Red Charger LED (Slot1)
:Green 3. Appendix Troubleshooting Symptom No Power in Printer 1.Has the battery fully inserted?
Possible Cause 2.Is the power turned on?
1.Is the power turned on?
2.Is the paper set correctly?
3.Are the LED signals lighting red?
4.Is the LED blinking red?
5. Are you using Bluetooth?
6.Are you using IrDA?
1.Isnt the thermal head dirty?
2.Are you using the recommended paper?
Noting is printing The print is faint The orange or red LED is lighting even after charging battery. Action 1.Charge the battery pack. 2.Turn on power. 1.Turn on power. 2.Check the print paper setting. 3.Charge the battery. 4.Make sure that the paper is setting properly, or close the paper cover completely. 5.Reduce the distance of the device and the printer. 6. Adjust the angle of IrDA, or clean up the window, or avoid direct sunlight. 1.Clean it up. 2.Check the paper. The life cycle of the battery pack may have expired. Replace the battery pack with a new one. How to care How to clean up the thermal head and the rubber roller. 1) Push the paper cover lever to open the paper cover. 2) Wipe off any dust/dirt using the cotton swab with a small amount of alcohol (ethanol).
(Do not use thinner, benzene series or kerosene series.) 3) Close the cover after alcohol is dry. Thermal head Rubber roller Items Mechanical Head Paper Communication Size & Weight Environment Items Battery Cell Life time Size & Weight Environment Items LED Indication Charging Function Power Environment Size & Weight Specifications
[ Printer:JT-H200PR- ]
Printing Function Font Type Life Time Head Description Specifications Printing Printing Speed Printing Width Character font Line Thermal Max. 80mm/Sec (Panasonic Test Standard) 48mm (384 dots/ line) 12 x 24 dots (standard) Alpha-numeric, Barcode, 2D code Equal or more than 1 X 10 pulse Equal or more than 25Km(Recommended paper 58mm +0 - 1mm Outside (outside surface; thermal) Bluetooth V1.1 (Class 2) 2.4GHz IrDA V1.2 (Proprietary) Approx.W88mmXL102mmX D43mm Approx. 280g (without paper) Paper width Roll direction Type1 Type2 Size Weight Operation temperature 0 to 40 degree centigrade (without paper)
[ Battery Pack:JT-H100DP-50 ]
Description Type Rated capacity Specifications Lithium ion Battery 7.2V 1,150mAh (standard discharging) 300 times discharge/charge or 1year *1 Approx. W70mmXL38mm X D20mm Approx. 90g Size Weight Operation temperature 0 to 40 degree centigrade
*1: The battery is a consumable item therefore consumption and life time is just an indication and may vary depending on usage and environment conditions.
[ Battery Charger:JT-H100CG-50/51*2 ]
Specifications Description Power LED (Red) Charger LED
(Green: X 2 (Slot)) Charging time Charging current Power-on : on 1) Charging, Output short : 1Hz blinking 2)Complete charging : on 3) Abnormal temperature, No good mode : off Charging 2-battery Approx. 4 hours *3 Approx.1,200mA(10 to 40degree centigrade) Approx. 840mA(0 to 10degree centigrade) AC100V-240V50/60Hz Operation temperature 0 to 40 degree centigrade Size Approx.W94mmXL122mmXD35mm
(without cable Approx. 270g Weight
*2: JT-H100CG-50; Europe version (excluding UK) JT-H100CG-51; UK version
*3: Charging is parallel and 1 slot only. (Automatical slot change) Charging time varies depending on battery comsumption and temperature. Warranty Policy The warranty period and what is covered are according to the application, contract or distributor. Please ask our sales rep.
<NOTE>
The out of term warranty is as follows:
- Any secondary damages as for the loose of Printing paper, data or business chances.
- Any damages by user including dropping, water contact or any other wrong use, other than the purpose designed for. Compliance Notice Hereby, we declare that this printer is in compliance with the essential requirements and other relevant provision of Directive 1999/5/EC. Comliance Notice CE Mark This equipment is in conformance with the reuirements of European Council Directive listed below:
- R&TTE Directive 1995/5/EC This notice is based upon compliance of the product to the following standards:
- EN 60950 :2000;
- EN 300 328 :2003;
- EN 301 489-1 :2002; EN 301 489-17 :2002 Einfhrung Einfhrung Vielen Dank, dass Sie sich fr den Kauf eines Panasonic-Druckers der Baureihe JT-H200PR entschieden haben. Dieses Handbuch beschreibt die Bedienung des Druckers. Bitte lesen Sie diese Bedienungsanweisung vor dem Gebrauch dieses Produktes sorgfltig durch. Dieser Drucker ist mit Bluetooth fr drahtlose Kommunikation ausgerstet.
[Gert der Klasse 2]
Was ist im Karton?
1. Drucker (Batterie nicht inbegriffen) 2. Bedienungsanleitung (dieses Handbuch) Optionen 1. Batterie: JT-H100DP-50 2. Batterieladegert: JT-H100CG-50/51 3. Tragetasche: JT-H200PR-C0 Sonstige Ausrstungen 1. Thermalpapier
(Bitte fragen Sie Panasonic hinsichtlich der empfohlenen Papiersorte.) 1. Vorbereitung Vorsichtsmanahmen
[ Drucker :JT-H200PR- ]
1. Strende Radiofrequenzen vermeiden Den Drucker nicht in der Nhe eines Fernseh- oder Radiofunkgerts aufstellen. 2. Nicht belasten Keine schweren Gegenstnde auf den Drucker legen. 3. Kleine Gegenstnde fernhalten Keine Broklammern oder andere kleine Gegenstnde in den Drucker stecken. 4. Trocken halten Andernfalls besteht eine Hitze-, Feuer- oder Explosionsgefahr. 5. Den Drucker nicht zerlegen Nicht versuchen den Drucker zu zerlegen. Es besteht Hitze-, Feuer- oder Explosionsgefahr. 6. Nicht berhren Das Papiermesser und den Thermodruckkopf nicht berhren. Es besteht Verletzungsgefahr. 7. Keine anderen Batterien verwenden Der Drucker ist fr den Einsatz mit der vorgeschriebenen Batterie JT-H100DP-50 ausgelegt. Den Drucker mit keiner anderen Batterie betreiben. VORSICHT! Es besteht Explosionsgefahr, wenn die Batterie gegen einen falschen Typ ausgewechselt wird. Leere Batterien entsprechend den Anweisungen und rtlichen Vorschriften entsorgen. 8. Die Stromversorgungs-Buchse und serielle Schnittstelle nicht benutzen Die Stromversorgungsbuchse und die serielle Schnittstelle sind ausschlielich fr Wartungszwecke durch Panasonic-Personal vorgesehen. Sie drfen nur in Anwesenheit des Service-Personals benutzt werden. Bei unsachgemer Nutzung des Gerts besteht Hitze-, Feuer- oder Explosionsgefahr. 9. Nicht in Flugzeugen und Krankenhusern benutzen Dieser Drucker ist mit Bluetooth fr drahtlose Kommunikation ausgerstet. Den Drucker in Flugzeugen und Krankenhusern ausschalten. Die Verwendung in der Nhe von elektrischen Gerten bzw. medizinischen Ausrstungen kann Fehlfunktionen zur Folge haben.
<Hinweis>
Den Deckel des Druckers nicht whrend des Druckbetriebs ffnen. Das Thermopapier nicht direkter Sonneneinstrahlung, hohen Temperaturen, Staub und Feuchtigkeit aussetzen. Vorsichtsmanahmen
[ Batterie:JT-H100DP-50 ]
1. Wrmeeinfluss vermeiden Die Batterie nicht ins Feuer werfen oder extremer Hitze aussetzen. Es besteht Explosionsgefahr. 2. Von anderen Gegenstnden fernhalten Die Batterie nicht mit Gegenstnden wie Halsketten oder Haarnadeln zusammen tragen oder lagern. Es besteht Hitze-, Feuer- oder Explosionsgefahr. 3. Trocken halten Es besteht Hitze-, Feuer- oder Explosionsgefahr. 4. Nicht zerlegen Keine scharfen Gegenstnde in die Batterie stecken. Nicht versuchen den Drucker zu zerlegen oder zu modifizieren. Es besteht Hitze-, Feuer- oder Explosionsgefahr. 5. Nicht kurzschlieen Plus (+) und Minus (-) Kontakte nicht kurzschlieen. Es besteht Hitze-, Feuer- oder Explosionsgefahr. 6. Extreme Hitze, Klte, und direkte Sonneneinstrahlung vermeiden Die Batterie nicht fr lngere Zeit bei direkter Sonneneinstrahlung, bzw. in heier oder kalter Umgebung laden, benutzen oder aufbewahren. 7. Nicht in Mikrowellenofen legen Die Batterie nicht in einen Mikrowellenofen oder eine Druckkammer legen. Es besteht Explosionsgefahr. 8. Nicht mit anderen Gerten verwenden Die Batterie ist fr den spezifizierten Drucker JT-H200PR-** und das Ladegert JT-H100CG-
50/51 ausgelegt. Die Batterie mit keinem anderen Gert verwenden. VORSICHT! Es besteht Explosionsgefahr, wenn die Batterie gegen einen falschen Typ ausgewechselt wird. Leere Batterien entsprechend den Anweisungen und rtlichen Vorschriften entsorgen. 9. Verwendungsverbot Falls von der Batterie ein starker Geruch ausstrmt, zu hei wird, sich verfrbt, verformt oder sonst wie verndert, ist sie zu entfernen und darf nicht mehr verwendet werden.
<Hinweis>
Bitte laden Sie die Batterie vor dem Erstgebrauch mindestens 100 Minuten lang auf. Bitte konsultieren Sie unseren Handelsvertreter hinsichtlich Batterieentsorgung. Falls die Batterie ber einen lngeren Zeitraum nicht verwendet wird, laden bzw. entladen Sie sie solange, bis der Reststrom in der Batterie 30 % bis 40 % betrgt, und bewahren Sie sie danach an einem khlen und trockenen Ort auf. Vorsichtsmanahmen
[ Batterieladegert :JT-H100CG-50/51 ]
1. Kleine Gegenstnde fernhalten Keine Broklammern oder andere kleine Gegenstnde in das Ladegert stecken. Es besteht Hitze-, Feuer- oder Explosionsgefahr. 2. Das Ladegert nicht zerlegen Nicht versuchen, das Ladegert zu zerlegen. Es besteht Hitze-, Feuer- oder Explosionsgefahr. 3. Trocken halten Es besteht Hitze-, Feuer- oder Explosionsgefahr. 4. Nicht kurzschlieen Plus (+) und Minus (-) -Kontakte nicht kurzschlieen. Es besteht Hitze-, Feuer- oder Explosionsgefahr. 5. Nicht mit anderen Batterien verwenden Das Batterieladegert ist fr die spezifizierte Batterie JT-H100DP-50 ausgelegt. Das Ladegert mit keiner anderen Batterie verwenden. VORSICHT! Es besteht Explosionsgefahr, wenn die Batterie gegen einen falschen Typ ausgewechselt wird. Leere Batterien entsprechend den Anweisungen und rtlichen Vorschriften entsorgen. 6. Den Stecker nicht mit nassen Hnden berhren Es besteht Elektroschockgefahr. 7. Das Ladegert whrend eines Gewitters nicht berhren. Es besteht Elektroschockgefahr. 8. Darauf achten, dass der Stecker ganz in die Steckdose hineingesteckt wird. Es besteht Elektroschock- bzw. Feuergefahr. 9. Darauf achten, dass beim Herausziehen der Stecker angefasst wird. Wenn das Netzkabel beschdigt ist, besteht Elektroschock-, Kurzschlu- bzw. Feuergefahr. 10. Keine beschdigten Netzkabel bzw. stecker verwenden Es besteht Elektroschock- bzw. Feuergefahr. 11. Staub auf dem Netzstecker regelmig entfernen. Es besteht Hitze- bzw. Feuergefahr.
<Hinweis>
Um die bestmgliche Lebensdauer der Batterie zu erzielen, ist diese innerhalb von 24 Stunden nach beendigtem Aufaden aus dem Ladegert zu entfernen. Die Batterie bitte bei Umgebungstemperaturen von 5 bis 40 Grad laden. Bezeichnung und Funktion der Teile EIN /AUS Schalter Papierausgabe IrDA-
Schnittstelle Sicherung der Papierabdeckung Feed Status-LED Status Receiving Empfangs-LED
(Fr Papiervorschub Knopf drcken) Papierabdeckung Steckerabdeckung Batteriefachabdeckung
* Nur fr Wartungszwecke Element Status-
LED Anzeige Aus Grnes Licht Status Normal 1. Strom ein (leuchtet 5 Sekunden), 2. Strom aus (leuchtet 0.5 Sekunden) Rotes Licht Oranges Licht Erfasste Batteriespannung niedrig, drucken mglich Erfasste Batteriespannung niedrig, drucken nicht mglich 1. Die Papierabdeckung ist offen . 2. Kein Papier im Drucker. 3. Sonstiges, der Drucker ist defekt. Rotes Licht blinkt Empfangs-
LED Grnes Licht blinkt Whrend der Kommunikation 2. Betrieb Einsetzen der Batterie
<Batteriefachabdeckung ffnen>
1) Die Sicherung der Batteriefachabdeckung nach vorn schieben. 2) Die Batteriefachabdeckung nach oben ziehen. 3) Die Batteriefachabdeckung ffnen. 4) Die Batterie einsetzen. 2) 1) 3) 4) 3) 2) 1)
<Batteriefachabdeckung schlieen>
1) Die Batteriefachabdeckung zuklappen. 2) Die Batteriefachabdeckung nach unten schieben. 3) Die Sicherung der Batteriefachabdeckung nach hinten schieben.
<Hinweis>
Wenn sich die Batteriefachabdeckung vom Gehuse lsen sollte, wie angegeben wieder einsetzen.
* Die Batteriefachabdeckung ber den im Bild links eingekreisten Drehanker schieben. Papier einsetzen 1) Die Sicherung der Papierabdeckung nach hinten schieben. 2) Die Papierabdeckung ffnen. 1) 2) 3) Papier einlegen (das Papier mu fest aufgerollt und frei von Staub/Sand sein). 4) Die Papierabdeckung schlieen (darauf achten, da die Abdeckung vollstndig geschlossen wird.) 4) 4) 3) Papier Batterie aufladen 1) Die Batterie einsetzen und in Pfeilrichtung hineinschieben. 2) Whrend des Aufladens blinkt die grne Leuchtdiode. Nach beendigtem Aufladen geht die Ladeleuchte in Dauerlicht ber. Das Ladegert ldt immer nur eine Batterie auf. Wenn das Aufladen im Ladefach eins beendet ist, beginnt automatisch das Aufladen in Ladefach zwei. Ladedauer: ca. 2 Std./Batterie 3) Nach dem Aufladen die Batterie aus dem Ladegert entfernen. LED Aufladen (Ladefach 2) Betriebs-LED, rot LED Aufladen (Ladefach 1) 3. Anhang Strungsbeseitigung Problem Mgliche Ursachen Gegenmanahmen Keine Spannung am Drucker Es wird nichts gedruckt 1.Ist die Batterie korrekt eingesetzt?
2.Ist der Drucker eingeschaltet?
1.Ist der Drucker eingeschaltet?
2.Ist das Papier korrekt eingesetzt?
3.Leuchten die LEDs rot?
4.Blinkt das LED rot?
5. Verwenden Sie Bluetooth?
6. Verwenden Sie IrDA?
1.Ist der Druckkopf verschmutzt?
2.Verwenden Sie das vorgeschriebene Papier?
Die Gebrauchsdauer der Batterie ist erreicht. Schwaches Druckbild Das orangefarbene LED leuchtet auch nach dem Aufladen der Batterie Instandhaltung 1.Die Batterie aufladen. 2.Den Drucker einschalten. 1. Den Drucker einschalten. 2. Die Papiereinstellung berprfen. 3. Die Batterie aufladen. 4. berprfen, ob das Papier korrekt eingesetzt oder die Papierabdeckung vollstndig geschlossen ist. 5. Den Abstand zwischen Gert und Drucker verringern. 6. Den Winkel der IrDA Gerte zueinander ndern. Fenster reinigen, oder direkte Sonneneinstrahlung verhindern. 1. Den Druckkopf reinigen. 2. Die Papiersorte berprfen. Die Batterie durch eine neue Ersetzen. Reinigen des Druckkopfes und der Gummiwalze 1) Die Sicherung nach hinten schieben und die Papierabdeckung ffnen. 2) Staub/Schmutz mit einem weichen, leicht mit Alkohol (Ethanol) getrnkten Tuch abwischen.
(Verdnner, Benzol oder Petroleum darf nicht verwendet werden.) 3) Wenn der Alkohol verdunstet ist, die Abdeckung wieder schlieen. Druckkopf Gummiwalze Technische Daten
[ Drucker:JT-H200PR- ]
Position Bezeichnung Drucken Mechanik Druckgeschwindigkeit Max. 80mm/Sek. (Panasonic Test Standard) Druckbreite Zeichenfont Font-Typ Druckkopf Technische Daten Thermal-Zeilendruck Druckfunktion Lebensdauer Druckkopf 48mm (384 Punkte/Zeile) 12 x 24 Punkte (Standard) Alpha-numerisch, Barcode, 2D Code Grer gleich als 1 X 10 Impulse Grer gleich 25Km
(bei Nutzung des empfohlenen Papiers) 58mm +0 - 1mm Nach auen (Auenflche thermal) Bluetooth V1.1 (Klasse 2) 2.4GHz IrDA V1.2 (Proprietr) Ca. B88mm x L102mm x H43mm Ca. 280g (ohne Papier mit Akku) 0 bis 40 Grad Celsius (ohne Papier) Papier Kommunikation Paperbreite Abrollrichtung Typ 1 Typ 2 Abmessungen Gewicht Betriebstemperatur Abmessungen und Gewicht Umgebung
[ Batterie:JT-H100DP-50 ]
Bezeichnung Position Typ Batteriezelle Nennleistung Technische Daten Lithium-Ion-Batterie 7.2V 1,150mAh (Normalentladung) 300 Ent-/Aufladungen oder 1 Jahr *1 Ca. B70mm x L38mm x D20mm Ca. 90g 0 bis 40 Grad Celsius Abmessungen Gewicht Betriebstemperatur Gebrauchsdauer Abmessungen und Gewicht Umgebung
*1 Da die Batterie ein Verbrauchsgegenstand ist, sind die Angaben fr Verbrauch und Gebrauchsdauer nur ungefhre Werte und knnen in Abhngigkeit von den Betriebs- und Umgebungsbedingungen unterschiedlich sein.
[ Batterieladegert :JT-H100CG-50/51*2 ]
Position LED-Anzeige Bezeichnung Betriebs-LED (rot) LED Aufladen (grn x 2
(Ladefach)) Technische Daten Spannung ein, aus 1) Aufladen, Ausgang kurz: blinkt 1Hz 2) Aufladen beendet: leuchtet 3) Abnormale Temperatur, Strung: aus 2 Batterien aufladen: ca. 4 Stunden Ca. 1'200 mA (10 bis 40 Grad Celsius) Ca. 840 mA (0 bis 10 Grad Celsius) 100V 240V Ws, 50/60 Hz Ca. B94mm x L122mm x H35mm Ca. 270g 0 bis 40 Grad Celsius Aufladen Funktion Ladedauer Ladestrom Netzspannung Abmessungen und Gewicht Umgebung
*2 JT-H100CG-50: Europamodell (auer GB); JT-H100CG-51: GB-Modell
*3 Das Aufladen erfolgt parallel fr je ein Ladefach (automatischer Ladefachwechsel) Die Ladedauer ist abhngig von Verbrauch und Temperatur unterschiedlich. Abmessungen Gewicht Betriebstemperatur Garantie Garantiedauer und Deckungsumfang gelten entsprechend des Kaufvertrages. Bitte konsultieren Sie unseren Handelsvertreter.
<Hinweis>
Von der Garantie ausgeschlossen sind:
- Jegliche Folgeschden wie Verlust von Papier, Daten oder Geschftsausflle.
- Jegliche durch den Benutzer verursachten Schden wie Fallenlassen, Wasserkontakt oder Nutzung zu anderen Zwecken als dem Auslegungszweck. Konformittserklrung Wir erklren hiermit, dass dieser Drucker den grundlegenden Anforderung und sonstigen relevanten Vorgaben gem Richtlinie 1999/5/EC entspricht. Konformittserklrung CE-Kennzeichen Dieses Gert entspricht den Anforderungen der unten aufgefhrten Richtlinie der Europischen Gemeinschaft:
-R&TTE-Richtlinie 1999/5/EC Diese Erklrung basiert auf der Konformitt des Produktes mit folgenden Standards:
-EN 60950 : 2000
-EN 300 328 : 2003
-EN 301 489-1 : 2002; EN 301 489-17: 2002 For USA Federal communications commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
<NOTE> Model No. Model No: JT-H200PR-** [ ** : ID mark variation of printer]
1. Mark description: Double figures of alpha-numeral 2. Difference: Color of case, design of logo label, design of operating panel (in colors, In character), description of main brand (size, with or without logo, language: mother language etc), with or without hook for fixing belt. There is no different in electric spec and mechanism. For CANADA This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled Digital Apparatus", ICES-003 of the Department of Communications."
Cet appareil numrique respecte les limites de bruits radiolectriques applicables aux appareils numriques de Classe B prescrites dans la norme sur le matriel brouilleur : Appareils Numriques", NMB-003 dicte par le ministre des Communications. Memo This manual is copyrighted by Matsushita Electric Industrial Co.,Ltd. with all right reserved. Prouct may be subject to export control regulations. Specifications and manuals are subject to change without notice. Panasonic is aregistered of trademark of Matsushita Electric Industrial Co.,Ltd. Panasonic Marketing Europe(Germany) Phone:0611-235-343 Fax:0611-235-395 Panasonic Deutschland GmbH Phone:040-8549-0 Fax:040-8549-2500 Panasonic Business Systems U.K. Phone:01344-476514 Fax:01344-853705 Government & Corporate Systems Business Unit Matsushita Electric Industrial Co., Ltd. Phone:045-544-3447 Fax:045-544-3448 2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Printed in Japan J8Q57861B4
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-10-14 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-10-14
|
||||
1 | Applicant's complete, legal business name |
Panasonic Corporation of North America
|
||||
1 | FCC Registration Number (FRN) |
0003762242
|
||||
1 | Physical Address |
Two Riverfront Plaza, 9th Floor
|
||||
1 |
Newark, New Jersey 07102-5490
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@telefication.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
ACJ
|
||||
1 | Equipment Product Code |
JT-H200PR
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
B****** B******
|
||||
1 | Title |
Project Manager
|
||||
1 | Telephone Number |
201-3********
|
||||
1 | Fax Number |
201-3********
|
||||
1 |
B******@us.panasonic.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Matsushita Electric Industrial Co., Ltd.
|
||||
1 | Name |
M****** H******
|
||||
1 | Physical Address |
4-3-1 Tsunashima-higashi Kohoku-ku
|
||||
1 |
Yokohama, 223-8639
|
|||||
1 |
Japan
|
|||||
1 | Telephone Number |
+81 4********
|
||||
1 | Fax Number |
+81 4********
|
||||
1 |
h******@jp.panasonic.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bluetooth Handy Printer | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is EIRP. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific operating instructions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
TUV Rheinland Nederland B.V.
|
||||
1 | Name |
T******** K******
|
||||
1 | Telephone Number |
31-59********
|
||||
1 | Fax Number |
31-59********
|
||||
1 |
t******@nl.tuv.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CE | 2402.00000000 | 2480.00000000 | 0.0011000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC