Features:
Bluetooth Spec 4.0 Compliant
Class 2 type Output Power
Support A2DP 1.2,AVRCP V1.4 Profiles
Secure simple pairing, CSR's proximity pairing and CSR's proximity connection
Support for multi-language programmable audio prompts
OS battery status monitoring and smart apps
Wired audio support (USB and analogue)
SBC, MP3, and AAC decoder support
5-band fully configurable EQ
Integrated dual switch-mode regulators, linear regulators and battery charger
Size: 210.5mm x 13.50.5 mm x 2.350.5mm
Weight: 0.8g System Architecture Product Specification BM830 Stereo Solution Module Qualified CSR8630A04 July 2013 Product Description:
The BM830 is a Class 2 Bluetooth sub-system using CSR8630 chipset from leading Bluetooth chipset supplier Cambridge Silicon Radio. It is a single-chip radio and baseband IC for Bluetooth 2.4GHz systems.The integrated peripherals reduce the number of external components required, including no requirement for external codec, battery charger, SMPS, LDOs, balun or external program memory, ensuring minimum production costs. Applications:
Wireless speaker Specifications:
Operating Frequency Band Bluetooth Specification Output Power Class Max. Output Power Date Rate Channel No. Modulation Type Operating Voltage Host Interface Audio Interface Dimension Specifications are subject to change without prior notice 2.4GHz ~ 2.48GHz unlicensed ISM band V4.0 Class 2 2.5mW 3Mbps 79 GFSK /4 DQPSK 8DPSK 3.3V USB 1.1 Analogue and USB audio 210.5mm x 13.50.5 mm x 2.350.5mm Spec-BM830-V0.2 Page 1 of 10 www.sunitec-cn.com Electrical Characteristics Absolute Maximum Rating Storage Temperature Supply Voltage, (V_CHG) Recommended Operating Conditions Operating Temperature Range Supply Voltage, (V_BAT) Supply Voltage, (V_CHG) Power Consumption Slave SCO Connection HV3 SCO Connection EV3 SCO Connection 2EV3 Stereo high quality SBC Stereo high quality MP3 Master SCO Connection HV3 SCO Connection EV3 SCO Connection 2EV3 Stereo high quality SBC Stereo high quality MP3 VBAT = 4.2V; f = 2.441GHz; T=20C RF Characteristics Receiver Sensitivity at 0.1% BER Maximum Receiver Signal C/I Co-Channel Adjacent Channel Selectivity C/I -1MHz 2nd Adjacent Channel Selectivity C/I -2MHz 3rd Adjacent Channel Selectivity C/I -3MHz Image Rejection C/I VBAT = 4.2V; f = 2.4441GHz; T=20C Transmitter RF Output Power RF Power Control Range RF Power Range Control Resolution 20dB Bandwidth for Modulated Carrier 2nd Adjacent Channel Power (+/- 2MHz) 3rd Adjacent Channel Power (+/- 3MHz) VBAT = 4.2V; f = 2.4441GHz; T=20C All specifications including pinouts and electrical specifications may be changed without prior notice Units dBm dBm dB dB dB dB dB dB dB KHz dBm dBm Min
-
-20
-
-
-
-
-
Min 4 16
-
-
-
-
Units dBm Min
-40C
-0.30V Min
-40C 2.5V 4.75V Units mA mA mA mA mA mA mA mA mA mA Typ
-90
-10 6
-6
-38
-45
-16 Typ 8 24 0.5 940
-36
-45 Product Specification Max
+105C
+5.75V Max
+85C 4.2V 5.25V Average 11.0 11.8 9.2 13.3 12.5 10.8 11.2 8.8 13.2 11.8 Max
-85
-
11 0
-30
-40
-9 Max
-
-
-
1000
-20
-40 Bluetooth Spec
-70
-20 11 0
-30
-40
-9 Bluetooth Spec
-6 to +4
> 16
-
<1000
-20
-40 Spec-BM830-V0.2 Page 2 of 10 www.sunitec-cn.com Product Specification Pin Configurations PIN NO. 1 2 3 GND AIO0 PIO14 NAME TYPE GND Bi-directional Bi-directional 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 PIO15 Bi-directional PIO16 Bi-directional PIO17 Bi-directional PIO10 Bi-directional SCL PIO11 Bi-directional Bi-directional PIO12 Bi-directional PIO13 Bi-directional SPI_PCM#
GND PIO3 Bidirectional with weak pull-down GND Bi-directional PIO2 Bi-directional PIO5 Bi-directional PIO4 Bi-directional GND GND RST#
GND LED1 LED0 VREGENA BLE GND GND Input with strong pull-up GND Bi-directional Bi-directional CMOS Input FUNCTION Ground Analogue programmable input / output line Programmable input / output line 14. Alternative function:
UART_RX: UART data input Programmable input / output line 15. Alternative function:
UART_TX: UART data output Programmable input / output line 16. Alternative function:
UART_RTS: UART request to send, active low Programmable input / output line 17. Alternative function:
UART_CTS: UART clear to send, active low Programmable input / output line 10. Alternative function:
QSPI_FLASH_CLK: SPI flash clock I2C_SCL: IC serial clock line Internal EEPROM SCL Programmable input / output line 11. Alternative function:
QSPI_IO[0]: SPI flash data bit 0 I2C_SDA: IC serial data line Programmable input / output line 12. Alternative function:
QSPI_FLASH_CS#: SPI flash chip select I2C_WP: IC bus memory write protect line Programmable input / output line 13. Alternative function:
QSPI_IO[1]: SPI flash data bit 1 SPI/PCM select input:
0 = PCM/PIO interface 1 = SPI Ground Programmable input / output line 3. Alternative function:
SPI_MISO: SPI data output PCM1_OUT: PCM1 synchronous data output Programmable input / output line 2. Alternative function:
SPI_MOSI: SPI data input PCM1_IN: PCM1 synchronous data input Programmable input / output line 5. Alternative function:
SPI_CLK: SPI clock PCM1_CLK: PCM1 synchronous data clock Programmable input / output line 4. Alternative function:
SPI_CS#: chip select for SPI, active low PCM1_SYNC: PCM1 synchronous data sync Ground Ground Reset if low. Pull low for minimum 5ms to cause a reset. Ground LED driver. Alternative function: programmable output PIO[30]. LED driver. Alternative function: programmable output PIO[29]. Regulator enable input Can also be sensed as an input. Regulator enable and multifunction button. A high RE-MARK Spec-BM830-V0.2 Page 3 of 10 www.sunitec-cn.com GND VBUS GND Power Input CHG_EXT VBAT_SEN SE Power IN VBAT GND GND 1V8_OUT Power out VDD_PADS Power IN Power out 3V3_OUT GND GND USB_N Bi-directional Bi-directional USB_P GND PIO9 GND Bi-directional PIO0 Bi-directional PIO1 Bi-directional PIO8 Bi-directional PIO7 PIO6 PIO21 PIO18 LED2 GND MIC_BIAS LINE_AN LINE_AP LINE_BN LINE_BP AGND SPK_RN SPK_RP SPK_LN SPK_LP GND RF_IN GND Bi-directional Bi-directional Bi-directional Bi-directional Bi-directional GND Analogue out Analogue in Analogue in Analogue in Analogue in Analogue Analogue out Analogue out Analogue out Analogue out GND GND GND Product Specification input (tolerant to VBAT) enables the on-chip regulators, which can then be latched on internally and the button used as a multifunction input Ground Charger input. Typically connected to VBUS (USB supply) as Section 12 shows. External battery charger control. External battery charger transistor base control when using external charger boost. Otherwise leave unconnected. Battery charger sense input. Connect directly to the battery positive pin. Battery positive terminal. Ground Serial Peripheral Interface Clock Positive supply input for input/output ports 3.3V bypass linear regulator output. Ground USB data minus USB data plus with selectable internal 1.5k pull-up resistor Ground Programmable input / output line 9. Alternative function:
UART_CTS: UART clear to send,active low Programmable input / output line 0. Alternative function:
UART_RX: UART data input Programmable input / output line 1. Alternative function:
UART_TX: UART data output Programmable input / output line 8. Alternative function:
UART_RTS: UART request to send, active low Programmable Input/Output Line Programmable Input/Output Line Programmable Input/Output Line Programmable Input/Output Line LED driver. Alternative function: programmable output PIO[31]
Ground Microphone bias Line input negative, channel A Line input positive, channel A Line input negative, channel B Line input positive, channel B Ground connection for audio and audio driver. Speaker output negative, right Speaker output positive, right Speaker output negative, left Speaker output positive, left Ground Bluetooth 50 transmitter output /receiver input Ground 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Spec-BM830-V0.2 Page 4 of 10 www.sunitec-cn.com Recommended Layout patterns:
Product Specification Spec-BM830-V0.2 Page 5 of 10 www.sunitec-cn.com Recommended Reflow Temperature Profile:
Product Specification Key features of the profile:
-Initial Ramp=1-2.5/sec to 175 equilibrium
-Equilibrium time=60 to 80 seconds
-Ramp to Maximum temperature (250)=3/sec Max
-Time above liquidus temperature(217): 45 - 90 seconds
-Device absolute maximum reflow temperature: 250 MAC Address:
Each Module has his MAC Address 00A6 94 XXXXXX Concerning the dimension and printing content of the tab 1 line the last six letters of the LAP on the module 2 line the software version 3 line the customer material part number Qr code area,with 12 letters(MAC Address) The tab code pastes style:
(This Photos are for reference only)
(This Photos are for reference only) Spec-BM830-V0.2 Page 6 of 10 www.sunitec-cn.com Moisture Sensitive Level The MSL Rating of BM830 Module is 3. Product Specification Un-opened reels Shelf life:
BM830 has 12 months maximum from bag seal date when stored at < 40C / 90%RH. Spec-BM830-V0.2 Page 7 of 10 www.sunitec-cn.com Product Specification Standard Packing Information Module packing Box (Max 3000pcs module per box) 60pcs per tray, 10trays per ESD bag, sealed in ESD PE bag. Maximum modules per ESD bag is 600pcs Module packing bag dimension: 350.0mm x 195.0mm Delivering carton box To hold two units of module carton boxes for shipment (Max 3000pcs modules per box) Delivery Carton Box dimension: 320.0mm x 210.0mm x 170.0mm (W x D x H) ESD tray dimension: 290.00mm x 145.00mm x 10mm(W x D x H) ESD tray (to be packed in ESD PE bag). ESD PE bag size: 350.0mm x 195mm QDL Certificate Document References References Specifications of the Bluetooth System BlueCore-CSR8630 Product Data Sheet Version V4.0, 17 Dec. 2009 CS-303724-DSP1 Spec-BM830-V0.2 Page 8 of 10 www.sunitec-cn.com Product Specification Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter. The module must be installed in HOME THEATER AUDIO SYSTEM IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling The final end product must be labeled in a visible area with the following:
Contains FCC ID: ACJ-SC-HTB8. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. Document History Revision Date History V0.1 V0.2 2013-08-02 2013-12-2 First release Add the packing information Contact Information Sunitec Enterprise Co., Ltd. Head Office:
3F.,No.98-1,Mincyuan Rd Sindian City, Taipei County 231,Taiwan China Factory:
No.2,Qilin Road 2,Run Tang Ind., Dan-Keng Village Fu Ming Community, Guan-lan Town, BaoAn District, Spec-BM830-V0.2 Page 9 of 10 www.sunitec-cn.com Tel: 886-2-82191696 Fax: 886-2-82191676
Product Specification Shenzhen GuangDong China Tel: 86-755-29802983 Fax: 86-755-29802984 E-mail: sales@sunitec-cn.com or project@sunitec-cn.com Http://www.sunitec-cn.com Spec-BM830-V0.2 Page 10 of 10 www.sunitec-
cn.com