WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5751588.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Car Navigation users manual Model AT2201 Product Specifications Audio Audio Section AM/FM AM/FM Radio Section No. Operating Function 3.2.1.1 Transition to the radio mode No./
Button No. /
Name
(Softkey) AM ,FM Performing Specifications Note Audio
"Source"Radio Radio TopFM Radio"
"AM Radio"FM/AM Select Audio icon ( ) in short cut menu, push
"Source" button at the bottom of screen, then push
"Radio".Select "FM Radio" or "AM Radio" to go to FM/AM mode.To receive radio broadcast, touch frequency in the bottomo of screen. 3.2.1.2 Reading/writing of the preset memory.
(Softkey) Favourite FM/AM In FM/AM mode, by pressing "Heart mark" in top-right of the screen, you can set/remove arbitrary frequency to/from preset memory. Register Unregister Product Specifications USB USB Section No. 3.2.4.1 Operating Function USB Transition to the USB mode No./
Button No. /
Name
(Softkey) USB Performing Specifications Note Audio
"Source""USB"
USB Select Audio icon ( ) in short cut menu, push
"Source" button at the bottom of screen, then push
"USB". Volume name of USB media is shown in source list.
[USB-Audio]
[USB-Video]
3.2.4.2 Playback / Pause
(softkey) If If playing. is pressed while playing, this unit pauses. is pressed while pausing, this unit stars Product Specifications iPod iPod Section No. 3.2.5.1 Operating Function iPod Transition to the iPod mode No./
Button No. /
Name
(Softkey) iPod Performing Specifications Note Audio
"Source""iPhone"
iPod/iPhone Select Audio icon ( ) in short cut menu, push
"Source" button at the bottom of screen, then push
"iPhone". Volume name of iPod/iPhone is shown in source list. 3.2.5.2 Playback / Pause
(softkey) If If playing. is pressed while playing, this unit pauses. is pressed while pausing, this unit stars Product Specifications Bluetooth Bluetooth Section Bluetooth Registration method of Bluetooth device Operation Method Screen Display Specifications Touch Gear icon () in short cut menu.
"Bluetooth devices"
Touch "Bluetooth & devicese" in the menu.
"Manage devices""Search for devices"
BT Touch "Manage devices", then touch "Search devices" in the bottom-right of the screen. Meantime, set smart phone to waiting BT connection. You can see available devices list in bottom-right of the window, then select the device that you want to connect. H/UBT You may see pass code on both H/U and smartphone. Then Approve both. BT paring established successfully. You may need to approve on smartphone to transfer phonebook.
*BT
*Cold start erase all BT paring. Product Specifications Handsfree Handsfree Section No. Operating Function 3.3.2.1 Transition to the telephone menu screen No./
Button No. /
Name
(softkey) Phone Performing Specifications Note Select Phone icon ( ) in the short cut menu. Select function you want to use from phone menu. 3.3.2.2 Outgoing
(softkey) Keypad
"Keypad"
( ) Select "Keypad" from phone menu to go to dial screen. Push numeric button to enter phone number, push
( ) to start phonecall. Product Specifications AudioSetup Audio Setup Section No. 3.6.3.1 Operating Function Audio setup Transition to the audio setup adjustment screen No./
Button No. /
Name
(Softkey) Sound Performing Specifications Note AMP
(AMP) 4.1.1
[INIT]
Setting Settings"Sound Media"
Sound & Media"Sound tuning"
Select Setting from shortcut menu. Select "Sound & Media" from Settings menu. Select "Sound tuning" from "Sound & Media". 3.6.3.2 Bass/Mid/Treble,
(softkey) Bass/Mid/Treble Bass/Mid/Treble To Adjust Treble/Mid/Bass, drag slider to left (low) or right (high). 3.6.3.3 Balance/Fader
(softkey) Balance/Fader Balance/Fader To Adjust Balance/Fader, drag pointer or press adjust button. Pointer Adjust button Product Specifications Navigation Section Location GPS A vehicle location is displayed by GPS, and a direction is detected with a gyroscope. 4ch FL/FR = + (-2dB) RL/RR = (-2dB)
*About navi guidance When the speaker output is 4 channels, sounds are outputted as follows. FL/FR = Navi guidance + Basic music(-2dB) RL/RR = Basic music(-2dB) Navi guidance check method Navi guidance Since this device is always used with vehicle, it is not sold to general end users separately. Therefore there is no user manual of this device by alone. The following statements must be described on the user manual of the vehicle;
[For FCC]
FCC ID : ACJ932AT2201 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Radio frequency radiation exposure information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
[For ISED]
IC : 216J-AT2201 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1.This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1.Lappareil ne doit pas produire de brouillage;
2.Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Cet quipement est conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lISDE. Cet quipement doit tre install et utilis en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.