- The application product (LB-DF71) is the unit used in the system.
- This manual is the excerpt of only portions related to the application of the manual of whole system.
To reduce the risk of fire, electric shock or product damage,
Do not expose this unit to rain, moisture, dripping or splashing.
Do not place objects filled with liquids, such as vases, on this unit.
Use only the recommended accessories.
Do not remove covers.
Do not repair this unit by yourself. Refer servicing to qualified service personnel.
The socket outlet shall be installed near the equipment and shall be easily accessible.
The apparatus shall be connected to a mains socket outlet with a protective earthing connection.
Do not use any other AC cables except the supplied one.
The socket outlet shall be installed near the equipment and shall be easily accessible.
Do not use any other Exclusive use connection cables except the supplied one. [LB-
DF70/LB-DF71/LB-DF72Z/LB-DF72C/LB-DF73]
Connect the interface cable only when the server to be connected to this unit is turned off. [LB-DF70/LB-DF72C]
Do not use any other SAS cables except the supplied one. [LB-DF70/LB-DF72C]
Keep the screws out of reach of children to prevent swallowing.
This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. [LB-
DF70]
This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.
Be sure to use the mounting brackets to secure the unit to the 19-inch rack. [LB-
DF70/LB-DF71/LB-DF72Z/LB-DF72C/LB-DF73]
The unit is in the standby condition when the external power supply is connected. The primary circuit is always live as long as the external power supply is on. [LB-DF71/
LB-DF72Z/LB-DF72C]
Do not place sources of naked flames, such as lighted candles, on this unit. [LB-
DF70/LB-DF72C/LB-DF73]
To reduce the risk of fire, electric shock or product damage,
Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. [LB-DF70/LB-DF72C/LB-DF73]
Do not obstruct this units ventilation openings with newspapers, tablecloths, curtains, and similar items. [LB-DF70/LB-DF72C/LB-DF73]
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. [LB-DF71]
Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. USA Only: Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website:
http://www.panasonic.com/environmental/ or call 1-888-769-0149. FCC Note:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables with ferrite core when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party:
Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Support Contact: http://shop.panasonic.com/support
Location: Center of rear panel To replace a fuse:
1. Disconnect power and remove the AC plug. 2. Rotate the fuse holder counterclockwise and remove it. 3. After inserting the new fuse, rotate the fuse holder clockwise to fix it securely. Type: F20AH 600 V For continued protection against risk of fire, replace only with same type and rating of fuse.
Location: Center of rear panel Rated specification: 277 V 60 Hz Using an AC outlet of a higher rating than specified may cause risk of fire. UNSWITCHED 4 A MAX.
Front
No modifications may be made to the products.
Installation can only be performed by the vendor.
Please remove products that are no longer in use to prevent falls in case of an accident.
No modifications may be made to the products.
If the installation cannot be secured, reinforce to ensure sufficient strength.
Make sure the specified accessories are used for the installation.
Please follow the prescribed installation process.
/I
71