all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Amended User Manual Pages 32 to 37 | Users Manual | 637.45 KiB | / September 02 2000 | |||
1 |
|
Amended User Manual Pgs 2 to 10 | Users Manual | 351.91 KiB | / September 02 2000 | |||
1 |
|
Amended User Manual Pgs 32 to 37 | Users Manual | 519.72 KiB | / September 02 2000 | |||
1 |
|
User Manual | Users Manual | 783.00 KiB | / September 02 2000 | |||
1 | Cover Letter(s) | / September 02 2000 | ||||||
1 | Cover Letter(s) | January 02 2000 / September 02 2000 | ||||||
1 | Operational Description | / September 02 2000 | ||||||
1 | External Photos | / September 02 2000 | ||||||
1 | Operational Description | / September 02 2000 | ||||||
1 | Block Diagram | / September 02 2000 | ||||||
1 | Schematics | January 02 2000 / September 02 2000 | ||||||
1 | Test Report | January 02 2000 / September 02 2000 | ||||||
1 | Test Report | / September 02 2000 | ||||||
1 | Test Setup Photos | / September 02 2000 | ||||||
1 | Cover Letter(s) | July 12 1999 / September 02 2000 | ||||||
1 | Block Diagram | / September 02 2000 | ||||||
1 | Cover Letter(s) | / September 02 2000 | ||||||
1 | External Photos | / September 02 2000 | ||||||
1 | ID Label/Location Info | / September 02 2000 | ||||||
1 | Cover Letter(s) | / September 02 2000 | ||||||
1 | Schematics | / September 02 2000 | ||||||
1 | Cover Letter(s) | / September 02 2000 | ||||||
1 | Test Report | / September 02 2000 | ||||||
1 | Test Setup Photos | / September 02 2000 |
1 | Amended User Manual Pages 32 to 37 | Users Manual | 637.45 KiB | / September 02 2000 |
Weak Signal Display ON/OFF When ON is selected, picture is displayed even when broadcast signal is weak or nonexistent. 1 Display MAIN MENU. a Press ACTION*. Display SET UP CH 2sET screen. am SELECT 1) Press AV > @a:CH UP to select CH. v:CH DOWN 2) Press ACTION >:VOL UP to display. 4:VOL DOWN
~ 4 ACTION Select WEAK SIGNAL h DISPLAY. 1) Press AV to select. 2) Press to set ON or OFF.
* ON = Picture is displayed regardless of signal condition, and may not always be clearly visible. OFF = Screen turns solid blue when signal is absent or weak.
* If unit is connected to equipment which has blue back feature, selecting ON will have no effect on the other equipment. 4 Return to the normal 4 screen. O Press ACTION twice. Model PV-C2060 unit is shown here.
K S VCR Lock RN > All operations are prohibited except Timer recording and tape A 3 eject. Useful for families with small children. 8 ph To turn ON. fa) REC In stop mode, hold a 4 down REC on the nN unit without a nw cassette inserted for - _ nS 7 seconds. Creer 5 i n To turn OFF. N 9 Repeat above with Ss v or without cassette. qw REC
* VCR Lock is canceled automatically after about 24 hours if clock is set. 32 For assistance, call 1-800-211-PANA(7262)
| C2060- P32-33 32 : 99.12.14, 11:33 PM C a aD pen ECL pane) meek ae eee NUMBERED keys Opy s/o) 81g Tapes (Dubbing) Ae aC aay anon Pao aun button on the remote Connections you'll need to make. Recording (Editing) unit
<Model PV-C2060 unit is shown here.> y 8 8) IN FROM Recording (Editing) unit
<Model PV-C2080 unit is shown here.>
Playing (Source) VCR R-AUDIO-L IN FROM VIDEO
% Insert pre- Insert blank tape with Pa recorded tape. record tab. af)
* Dubbing tapes protected with Copy a Guard will have poor quality results. Pi oO}
oO Select LINE mode. oS See Selecting Input Mode section on page 13. Py or Put in Standby Put in Standby mode. g mode. FEC, PAUSE | Press REC, then Press PLAY then ((e)) F PAUSE/SLOW immediately. PAUSE at starting point. 4 Start dubbing. mAUSE Start dubbing.
[ray Press PLAY. 5 Cr) Press PAUSE/SLOW. 5 Stop dubbing. sro? Stop dubbing. sre Press STOP/ Press STOP. EIeer Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.
| | C2060- P32-33 33 99.12.14, 11:33 PM | |
FM Radio is ... This unit has an FM radio with built-in antenna, 9 station preset, and a band range Display FM radio mode. of 87.5 ~ 108.1 MHz. You can even set the On-Timer (page 20) to wake up to your Press FM/TV* on the remote or favorite radio station. TIMER/FM twice on the unit. ae Model PV-C2060 unit is shown here.
Select the FM number. Press a OO@
ODO@ we key OoOoe Set the radio station. 1) Press CH AV to select the K desired radio station.
(Each press changes frequency 200 kHz.) 2) Press ADD/DLT to set. ae 3. CLIOdd0tt-T T1605 oO 1 TIMER/FM ADD/OLT
) 1 FM/TV Sset
* SELECT --
a:CH UP
* w:CH DOWN C>:vot up 4:VOL DOWN Aaction Quick Station Scan Hold down CH A or for a few seconds, then release to scan for FM stations in your area.
* To cancel, press CH A or while in search mode. To Make Corrections, select station with a NUMBERED key, then do step 3 again. To exit FM mode, press FM/TV on the remote or TIMER/FM twice on the unit. ATP NHaD cota Make sure FM tuning is done correctly
(See FM Radio Setup.) a 4 Display MAIN MENU. O Press ACTION. 2 NUMBERED Keys Sappout Display SET UP TV screen. 1) Press AV<4 >
to select TV. 2) Press ACTION to display. Continued on the next page... 34 For assistance, call 1-800-211-PANA(7262)
| | C2060- FM TRANSMITTER(P34-37) 34 99.12.14, 11:32 PM | |
Important: if the remote control POWER, CH Up/Down, NUMBERED keys, ACTION, PROG/VCRY+, DISPLAY, SEARCH. R-TUNE, FM/TV, or ADD/DLT button does not work when pressed, press COMBO button on the remote and try the butlon again. Select FM ANTENNA. 1) Press AV to select. 2) Press > to select INT
(INTERNAL) or EXT (EXTERNAL) whichever sounds the best. a CTION KEY
<For Model PV-C2060 only>
@ For cable TV users > INT
@ For antenna users > EXT End setup. 4 O Press ACTION twice to exit. Using FM Radio Display FM radio mode. AL @
Press FM/TV on the remote or TIMER/FM twice on the unit. Select the FM number. Press a OoOD aoOw NUMBERED key
(1~9) to select a
@ preset station
(see steps 2 and 3 on the previous page.) To cancel, press FM/TV on the remote or TIMER/FM twice on the unit. Once stations are set, the selected station and current time are displayed when FM Radio mode is entered. To remove time, press DISPLAY. if DISPLAY is pressed, the unit status screen appears. To select Audio Mode for FM Radio Select STEREO or MONO. Press AUDIO AUDIO | repeatedly in FM Radio mode.
| | C2060- FM TRANSMITTER(P34-37) 36 Model PV-C2060 unit is shown here. Buumsereo Keys WCelhi-Bi-lel@m ol-relli-yiy eh y/
* FM radio cannot be recorded on a Video cassette.
* You may get better reception by repositioning the unit. You cannot select FM Radio mode during playback or record, or while a blue back
(PROG, ACTION, MENU) screen is displayed. 99.12.14, 11:32 PM | |
FM Transmitter is ... <For Model PV-C2080 only>
a feature whereby this unit's sound signai can be heard on your em a=
FM Radio. First, tune your radio to a frequency (98~97,99~ = 99 [poo Send Wireless 103 MHz) that is not being broadcast on by a radio station. Then, set this unit to the same carry frequency (see below.) Now, fine-tune your radio so the sound comes in clearly. FM Transmitter Carry Frequency Setup Sin 187 net Audio equipment 4 4 Display MAIN MENU. [Carry Frequency : 93 = 97, 99~ 103 MHz]
O Press ACTION. FM Transmitter ON/OFF Display SET UP TV 1 Do FM Transmitter Carry Frequency
? : a | steps 1~3. (See left.)
| (e@ es a get ew) Select SET UP FM to select ia TRANSMITTER. Ty, 1) Press AV 2) Press to select. ACTION 2) Press . to i set ON to display. or OFF. Select SET UP FM. End setup 1) Press AV to select. Press ACTION three 2) Press > O times. to display.
) Select SET UP FM Do FM Transmitter Carry Frequency TRANSMITTER. steps 1~3. (See left.)
: 1) P :
) oeey Select Speaker with 2) Press P to Ea TRAN MITER | Transmitter. display. Ee 1) Press AV
* When step 4 is done, FM TRANSMITTER ae to select. i ; ON * SELECT. A KEY . is automatically set to ON. a f SN Key Se CES 2) Press > to
: : set ON TRaANeuiner. | Set the Carry Frequency. or OFF. If you select... 1) Press AV @ ON 3 intemal Speaker ON with Transmitter to select the B OFF > Internal Speaker MUTE with Transmitter frequency CD range. Th
(93-97 or This operation has effect only when FM TRANSMITTER : ON" (see above.) 99-103MHz) if SPKR W/FM TRANS : OFF, the MUTE and VOLUME 2) Press <p> key will not function. to select Se the Carry End setup 3) Frequency. 4 Press ACTION three ress times. ACTION to set. O
. The selector bar returns (T steps ie lo center position when . frequency range is redisplayed.) Cp switched. The Carry Frequency shown by the selector bar is a guide M . only. Please listen to the sound and adjust accordingly. To Make Corrections, * The unit will transmit sound when unit power is on and select frequency with CH AW, then repeat step 5. FM TRANSMITTER : ON is selected.
* When unit power is turned off, FM TRANSMITTER End setup returns to OFF setting. * Please put your FM Radio within 157 inch of the unit. Press ACTION three times. - interference occurs when you select CATV channels O 95, 96, or 97, while FM Transmitter is operating. FM Transmitter will not work in FM Radio Mode. For assistance, call 1-800-211-PANA(7262)
| | C2060- FM TRANSMITTER(P34-37) 36 99.12.14, 11:32 PM Pp i if A Important if the remote control POWER, CH Up/Down, NUMBERED &
icture } TG st me nt ONONN aL Oe) Lem pN Asa etn SIN =
ot ADD/DLT button does not work when pressed. press CON button on the remote and try the button again. Display MAIN MENU. Press ACTION. Display SET UP TV screen. 2 1) Press AV-<4 >
to select TV. 2) Press ACTION to display. 2 SET
= SELECT _ 3 CH UP Y ~:CH DOWN 4 >:VOL UP 4:VOL DOWN Display VIDEO ADJUST screen. 1) Press AV to select. 2) Press > to display. 1) Press AV to select an item.
(See below right.) 2) Press <4 > to adjust. To Reset Picture Controls. Press AV and to select and set NORMAL. All controls return to their factory settings.
2. 4 p=) i?) i") on
(eo) xe) i) oa as
\e)
=) Picture Adjustment mw COLOR Control Adjust color intensity. End setup. & TINT Control 5 4 O Press ACTION three times Adjust for natural flesh tones. to exit. Hm BRIGHTNESS Control Adjust picture brightness.
@ PICTURE Control Adjust picture intensity by adjusting both contrast and color level in the proper balance.
@ SHARPNESS Control Adjust picture sharpness. 37
| | C2060- FM TRANSMITTER(P34-37) 37 99.12.14, 11:32 PM | |
1 | Amended User Manual Pgs 2 to 10 | Users Manual | 351.91 KiB | / September 02 2000 |
Important Safeguards and Precautions READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL WARNINGS IN THE MANUAL AND ON UNIT INSTALLATION 1 POWER SOURCE CAUTION Operate only from power source indicated on unit or in this manual. If uncertain, have your Electric Utility Service Company or Video Products Dealer verify your home power source. 2 POWER CORD PLUG For safety, this unit has a polarized type plug (one wide blade), or a three-wire grounding type plug. Always hold the plug firmly and make sure your hands are dry when plugging in or unplugging the AC power cord. Regularly remove dust, dirt, etc. on the plug. POLARIZED PLUG CAUTION:
The plug fits into outlet one way. If it cannot be fully inserted, try reversing it. If it still will not fit, have an electrician install the proper wall outlet. Do not tamper with the plug. GROUNDING PLUG CAUTION:
The plug requires a three-hole grounding outlet. If necessary, have an electrician install the proper outlet. Do not tamper with the plug. 3 POWER CORD To avoid unit malfunction, and to protect against electrical shock, fire or personal injury:
- Keep power cord away from heating appliances and walking traffic. Do not rest heavy objects on, or roll such objects over the power cord.
- Do not tamper with the cord in any way.
- An extension cord should have the same type plug (polarized or grounding) and must be securely connected.
- Overloaded wall outlets or extension cords is a fire hazard.
- Frayed cords, damaged plugs, and damaged or cracked wire insulation are hazardous and should be replaced by a qualified electrician. 4 DO NOT BLOCK VENTILATION HOLES Ventilation openings in the cabinet release heat generated during operation. If blocked, heat build-up may result in a fire hazard or heat damage to cassettes. For your protection:
a. Never cover ventilation slots while unit is ON, or operate unit while placed on a bed, sofa, rug, or other soft surface. b. Avoid built-in installation, such as a book case or rack, unless properly ventilated. 5 AVOID EXTREMELY HOT LOCATIONS OR SUDDEN TEMPERATURE CHANGES Do not place unit over or near a heater or regulator, in direct sunlight, etc. If unit is suddenly moved from a cold place to a warm place, moisture may condense in unit and on the tape causing damage. 6 TO AVOID PERSONAL INJURY Never place unit on support or stand that is not firm, level, and adequately strong. The unit could fall causing serious injury to a child or adult and damage to the unit. Move any appliance and cart combination with care. Quick stops, excessive force, and uneven surfaces may cause objects to overturn. Carefully follow all operating instructions. OUTDOOR ANTENNA INSTALLATION 1 SAFE ANTENNA AND CABLE CONNECTION GROUND CLAMP ANTENNA LEAD IN WIRE An outside antenna or cable system must be properly grounded to provide some protection against built up static charges and voltage. Section 810 of the National Electrical Code, ANSI/NFPA 70 (in Canada, part 1 of the Canadian Electrical Code) provides information regarding proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC ART 250, PART H) ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20) NEC - NATIONAL ELECTRICAL CODE ELECTRIC SERVICE EQUIPMENT GROUND CLAMPS GROUNDING CONDUCTORS
(NEC SECTION 810-21) 2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES OR CIRCUITS Locate an outside antenna system well away from power lines and electric light or power circuits so it will never touch these power sources should it ever fall. When installing antenna, absolutely never touch power lines, circuits or other power sources as this could be fatal. USING THE UNIT Before unit is brought out of storage or moved to a new location, refer again to the INSTALLATION section of these safeguards. 1 KEEP UNIT WELL AWAY FROM WATER OR MOISTURE, such as vases, sinks, tubs, etc. 2 IF EXPOSED TO RAIN, MOISTURE, OR STRONG IMPACT, unplug unit and have it inspected by a qualified service technician before use. 3 ELECTRICAL STORMS During a lightning storm, or before leaving unit unused for extended periods of time, disconnect all equipment from the power source as well as the antenna and cable system. 4 WHEN UNIT IS PLUGGED IN DO NOT OPERATE IF:
- liquid has spilled into unit.
- unit was dropped or otherwise damaged.
- unit emits smoke, malodors, or noises. Immediately unplug unit, and have it inspected by a service technician to avoid potential fire and shock hazards. Never drop or push any object through openings in unit. Touching internal parts may cause electric shock or fire hazard. Keep magnetic objects, such as speakers, away from unit to avoid electrical interference. 5 USING ACCESSORIES Use only accessories recommended by the manufacturer to avoid risk of fire, shock, or other hazards. 6 CLEANING UNIT Unplug unit. Use a clean, dry, chemically untreated cloth to gently remove dust or debris. DO NOT USE cleaning fluids, aerosols, or forced air that could over-spray, or seep into unit and cause electrical shock. Any substance, such as wax, adhesive tape, etc. may mar the cabinet surface. Exposure to greasy, humid, or dusty areas may adversely affect internal parts. SERVICE 1 DO NOT SERVICE PRODUCT YOURSELF If, after carefully following detailed operating instructions, the unit does not operate properly, do not attempt to open or remove covers, or make any adjustments not described in the manual. Unplug unit and contact a qualified service technician. 2 REPLACEMENT OF PARTS Make sure the service technician uses only parts specified by the manufacturer, or have equal safety characteristics as original parts. The use of unauthorized substitutes may result in fire, electric shock, or other hazards. 3 SAFETY CHECK AFTER SERVICING After unit is serviced or repaired, request that a through safety check be done as described in the manufacturers service literature to insure video unit is in safe operating condition. 2 C2060- P02-7 2 99.12.14, 11:22 PM s Safety Precautions/Mesures de scurit Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Avertissement: Afin de prvenir tout risque dincendie ou de chocs lectriques, ne pas exposer cet appareil la pluie ou une humidit excessive. Attention: Pour viter les chocs lectriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusquau fond. This video recorder, equipped with the HQ (High Quality) System, is compatible with existing VHS equipment. Only use those tapes with the mark. It is recommended that only cassette tapes that have been tested and inspected for use in 2, 4, 6, and 8 hour VCR machines be used. This television receiver provides display of television closed captioning in accordance with 15.119 of the FCC rules. FCC WARNING: Any unauthorized changes or modifications to this equipment would void the users authority to operate. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit. This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems. C2060- P02-7 3 99.12.14, 11:22 PM 3 Table of Contents To Start!
Use Now!
Enjoy more!
Important Safeguards and Precautions ... 2 Before Using .................................. 6 Accessories .................... 6 Loading the Batteries ...... 6 Record/Playback Time ... 6 Prevent Accidental Tape Erasure .................. 6 TV Operation................................ 10
(Main Operation, NIGHT (NITE) Mode, Using the 100 Key, Rapid Tune, Audio Mute, Phones, SELF-DEMO Mode) MTS Broadcast /
TV Stereo System........................ 11
(Stereo/SAP/Mono broadcast, Select Audio Mode for TV Viewing) Timer Recording ..................14 ~ 15
(Main Operation, Cancel, Replace or Clear Program Contents) Timer Program using VCR Plus+ System .............. 16 ~ 19 CABLE BOX SETUP .............. 17 VCR Plus+ Channel Setup ..... 18 VCR Plus+ System Programming ... 19 TV Timer Features................ 20 ~ 21 ON-TIMER with Alarm ............ 20 SLEEP TIMER ........................ 21 INSTANT ALARM ................... 21 Closed Caption System ......22 ~ 23 Closed Caption Mode Feature ..... 22 Caption On Mute Feature ............. 23 Tape Operation..................... 24 ~ 27 Commercial Skip ........... 24 Program End Search .... 24 Tape Position ................ 24 Repeat Play .................. 25 Zero Search .................. 25 Auto Operation Functions ... 25 VHS Index Search System .. 26, 27 Other Information!
Reset Language, Channels, Clock...46 On-Screen Display (OSD) ........... 47 Unit Information........................... 48 Before Requesting Service ........ 49 4 For assistance, call 1-800-211-PANA(7262) C2060- P02-7 4 99.12.14, 11:22 PM Connections............................................................... 7 Outdoor Antenna Connections ...... 7 DSS/Cable box Connections ......... 7 One Time Setup ................................................... 8 ~ 9
(Language, Channel, Clock) Playback a Tape ....................................................... 12
(Main Operation, Forward or Reverse Search, Still Picture, Slow Motion, Frame by Frame Advance, Features for a Quality Picture) Record On a Tape .................................................... 13
(Main Operation, One Touch Recording(OTR), Selecting Input Mode) Special VCR Features...................................... 28 ~ 32 Channel Caption .................... 28, 29 Time Stamp ........................... 30, 31 Weak Signal Display ON/OFF ......... 32 VCR Lock ..................................... 32 Copy Your Tapes (Dubbing) .................................... 33 FM Radio .......................................................... 34 ~ 35 FM Radio Setup ........................... 34 FM ANTENNA Setup ................... 34 Using FM Radio ........................... 35 To select Audio Mode for FM Radio .... 35 FM Transmitter (For Model PV-C2080 only) .................. 36
(FM Transmitter Carry Frequency Setup, FM Transmitter Setup, Speaker with FM Transmitter Setup) Picture Adjustment ................................................. 37 V-Chip Control Feature ................................... 38 ~ 41 Enter Secret Code ....................... 38 Setup US MOVIES Ratings ......... 39 Setup US TV PROGRAMS Ratings .. 40 Blocking Message ........................ 41 Cable Box Universal Remote Control Feature ..... 42 ~ 43 The Universal Remote Control Setup .... 42 Using the Universal Remote Controls .... 42 Remote Warning ON/OFF ................. 43 DSS/Cable Box Brand Code Numbers .... 43 n g G e t t i G G e e t t t t i i n n g g S S t t a a r r t t e e d d t a r t e d S B a s B a s i i c c O O p p e e r r a a t i t i o n o n A A d d v v a a n n c c e e d d O O p p e e r r a a t t i i o o n n Audio Feature (For Model PV-C2080 only)........... 44 ~ 45 Service Center List .................................................. 50 Spanish Quick Use Guide ............................... 51 ~ 53 Location of Controls................................................ 54 Warranty ................................................... Back Cover 5 C2060- P02-7 5 99.12.14, 11:22 PM F o r Y o u r I F o r Y o u r I n f o r m a t i o n n f o r m a t i o n Before Using Congratulations on your purchase of one of the most sophisticated and reliable products on the market today. Used properly, it will bring you and your family years of enjoyment. Please fill in the information below. The serial number is on the tag located on the back of your unit. Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Model No. Serial No. Accessories VOL C H C H
+VOL
R C V Remote Control LSSQ0198 Batteries 2 AA To order accessories, call toll free 1-800-332-5368. Record/Playback Time Only use tapes with the mark in this unit. Tape Speed Setting SP
(Standard Play) LP
(Long Play) Type of Video Cassette T60 T120 T160 1 Hour 2 Hours 2 Hours 4 Hours 2 Hours 40 Minutes 5 Hours 20 Minutes Loading the Batteries 1) Open the cover. 2) Insert batteries as marked. 3) Close the cover. Battery replacement caution Do not mix old and new batteries. Do not mix alkaline with manganese batteries. Prevent Accidental Tape Erasure Break off the tab to protect. Record Tab Screw driver To record again. SLP
(Super Long Play) 3 Hours 6 Hours 8 Hours Cover the hole with cellophane tape. 6 For assistance, call 1-800-211-PANA(7262) C2060- P02-7 6 99.12.14, 11:22 PM Connections Outdoor Antenna Connection Unhook the antenna from your previous TV or VCR and connect it to the back of the unit as shown in the diagram. If your antenna system has separate UHF and VHF lead-ins, you need a UHF/VHF Band Mixer (not supplied.) WARNING:
When using Nut type RF coaxial cables, tighten with fingers only. Overtightening may damage terminals. UHF/VHF Band Mixer (not supplied)
(Flat) Twin Lead 300 Ohm Cable
(Round) 75 Ohm coaxial Cable or from Antenna 300-75 ohm Transformer
(not supplied) VHF/UHF
(Flat) Twin Lead 300 Ohm Cable Back of unit
<Model PV-C2060 unit is shown here>
DSS/Cable box Connections I Without a Cable Box You can;
record or view unscrambled channels. You cannot;
record or view scrambled channels. view a channel other than the one selected for any type of recording. Antenna or CABLE
. I With a Cable Box You can;
record or view any channel including scrambled channels. NOTE: Channel selection must be made at the cable box. You cannot;
view a channel other than the one selected for any do a Timer recording of a channel unless you select it type of recording. at the cable box. Note to CABLE System Installer This reminder is provided to call the CABLE (Cable TV) System Installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. unit unit Antenna or CABLE Cable Box IN OUT I With a DSS Receiver You can;
record or view any channel including scrambled channels. NOTE: Channel selection must be made at the DSS Receiver. You cannot;
view a channel other than the one selected for any type of recording. do a Timer recording of a channel unless you select it at the DSS box. NOTE: The DSS receiver must be turned off to view programs from a cable box or antenna. See the DSS manual for details. Antenna or CABLE Satellite unit DSS Receiver IN IN OUT C2060- P02-7 7 99.12.14, 11:22 PM VHF/
UHF VHF/
UHF VHF/
UHF 7 G G e e t t t t i i n n g g S S t t a a r r t t e e d d B a s i c O p e r a t i o n A d v a n c e d O p e r a t i o n F o r Y o u r I n f o r m a t i o n Process of Setup Language channel Clock POWER 1 2 CHANNEL DOWN VOL C H C H
+VOL
R C V 2 3 2 CHANNEL UP VOLUME UP One Time Setup When the unit is turned on the first time, setup mode is entered automatically. 1 2 Press POWER* on the remote or unit. Select the language. C H for English SELECT LANGUAGE PUSH CH : E n g l i s h OPR I M I R CH : E s p a o l C H APP. VOL + : F r a n a i s for Spanish
(Espaol) for French
(Franais) If wrong language is set, complete Reset all unit Memory
+VOL Functions steps page 48. If you use a cable box, it must be left on. 3 CHANNEL / CLOCK AUTO SET CONNECT ANTENNA CABLE AND I F YOU USE A CABLE BOX, TUNE I T TO YOUR LOCAL PBS CH THEN. PLE ASE PUSH CH UP KEY Start Channel Auto Set and Clock Auto Set. Press CH
. C H CH AUTO SET PROCEED I NG AUTO CLOCK SET PROCEED I NG Case 1
(Setup completed) Case 2
(Setup incomplete) 6 / 7 / 2000 WED 12 : 00PM DST : ON SETT I NG : CH 1 0 AUTO CLOCK SET COMPLETED END : PUSH CH UP KEY C H Press CH to exit. If your area observes daylight saving time, but you would like to turn the DST feature off, complete the To Set or Reset the Clock step on page 46 and set DST : OFF. If your area observes daylight saving time and DST is set to ON, but the time is incorrect; complete the Time Zone Adjust steps on the next page. AUTO CLOCK SET I S I NCOMPLETE PUSH ACT I ON TO SET CLOCK See Case 2 next page. IMPORTANT NOTE FOR AUTO CLOCK SET Auto clock set is performed the first time when the unit is turned off each day. If used, a cable box must be left on and tuned to the PBS channel at the time the unit power is turned off if you want auto clock set to be done. If using a DSS receiver, it must be turned off for auto clock set. If a Cable Box or DSS receiver is connected to the unit via Audio/Video Jacks, an RF coaxial cable must also be connected for auto clock set and channel auto set features. If for any reason the time is changed manually, automatic time correction will not occur. 8 For assistance, call 1-800-211-PANA(7262) C2060- P08-10 8 99.12.14, 11:23 PM G e t t i n g S t a r t e d A d v a n c e d O p e r a t i o n
*Important:
if the remote control POWER, CH Up/Down, NUMBERED keys, ACTION, PROG/VCR+, DISPLAY, SEARCH, R-TUNE, FM/TV, or ADD/DLT button does not work when pressed, press COMBO button on the remote and try the button again. Case 1 Set TIME ZONE ADJUST. Display MAIN MENU. Press ACTION. M A I N MENU Display SET CLOCK screen. T V C H C H VCR LANGUAGE CLOCK EX I T VOL SELECT : KEY SET : ACT I ON KEY C H C H
+VOL 1) Press to select CLOCK 2) Press ACTION to display. VOL C H C H
+VOL
R C V ACTION SET SELECT 2 3
:CH UP
:CH DOWN b
:VOL UP
:VOL DOWN 1 2 4 a c 1 2 3 4 a b c SET CLOCK AUTO CLOCK SET MANUAL T I ME ZONE ADJUST : 0 SELECT : KEY SET : KEY END : ACT I ON KEY Select TIME ZONE ADJUST. VOL C H C H
+VOL 1) Press to select. 2) Press to subtract or add hour(s) as necessary. End setup. Press ACTION twice. TIME ZONE ADJUST returns to 0 if clock is set manually. Case 2 Clock Setup is Incomplete Set the clock manually. AUTO CLOCK SET I S I NCOMPLETE PUSH ACT I ON TO SET CLOCK Display SET CLOCK screen. Press ACTION to exit this mode. SET CLOCK 1 / /
1 / /
Set the clock manually.
DST : ON SESELE CT MONTH SELECT : KEY SET : KEY END : ACT I ON KEY VOL C H C H
+VOL 1) Press to select the month. to set. 2) Press Likewise set date, year, time, and DST (Daylight Saving Time.) To Make Corrections, repeatedly press to error, then correct. to move End setup. Press ACTION twice
(Clock starts.) Notes This units calendar is accurately maintained up to Dec. 31, 2089, 11:59 PM. Channel auto set selects normal TV or Cable channels depending on your unit hookup. STOP/EJECT REW/
ACTION key on the unit You can operate the menu screen using unit buttons. To display the menu, press STOP/EJECT and REW together with no tape inserted. ACTION On Unit To exit the menu, repeat above with or without tape inserted. VOL C H C H On Remote
+VOL keys Using
: CH UP
: CH DOWN
: VOLUME UP
: VOLUME DOWN Whenever the menu or program screen is displayed, CHANNEL UP/DOWN and function as VOLUME UP/DOWN only. function as CHCH VOLVOL On Unit 9 C2060- P08-10 9 99.12.14, 11:23 PM
*Important:
if the remote control POWER, CH Up/Down, NUMBERED keys, ACTION, PROG/VCR+, DISPLAY, SEARCH, R-TUNE, FM/TV, or ADD/DLT button does not work when pressed, press COMBO button on the remote and try the button again. TV Operation 1 2 CH 0 8 ABC C H Press POWER* on the remote or unit. Select a channel. or Using CH NUMBERED keys. C H or 3 24 Adjust volume. Press VOL + -. VOL
+VOL NIGHT (NITE) Mode Color and picture intensity levels are adjusted so the screen is easier on your eyes during night time use. N I GHT Set NIGHT mode. Press NITE. NIGHT mode may be selected when watching TV, playing a tape, or while in FM mode. To Cancel, press NITE. Previous settings are restored. NIGHT mode is canceled when power is turned off or power failure occurs. I Using the 100 key When selecting CABLE channels 100 to 125 with the NUMBERED keys, first press the 100 key, and then enter the remaining two digits. I Rapid Tune Press R-TUNE to display the last channel you were watching. I Audio Mute Press MUTE to instantly mute the sound. Press again, to restore the previous sound level. I Phones Connect an earphone (not supplied) or headphones (not supplied) to the Phones Jack. I SELF-DEMO Mode With Power ON, hold down PLAY/REPEAT on the unit for 5 seconds to display demo screen. Repeat this to exit. Check list before you begin. All connections are made. (See page 7.) Your unit is plugged in. Model PV-C2060 unit is shown here. 3 PLAY/
REPEAT POWER POWER VOLVOL CHCH STOP/EJECT REW/
STOP/EJECT REW/
PLAY/REPEAT FF/FF/
PLAY/REPEAT RECREC TIMER/FM TIMER/FM RECREC ON TIMER ON TIMER PROG TIMER PROG TIMER VIDEO IN AUDIO IN VIDEO IN AUDIO IN ACTION ACTION 1 2 PHONES Jack NITE 10 For assistance, call 1-800-211-PANA(7262) C2060- P08-10 10 99.12.14, 11:23 PM
1 | Amended User Manual Pgs 32 to 37 | Users Manual | 519.72 KiB | / September 02 2000 |
Special VCR Features (continued) Weak Signal Display ON/OFF When ON is selected, picture is displayed even when broadcast signal is weak or nonexistent. 1 2 3 4 Display MAIN MENU. Press ACTION*. M A I N MENU
T V VCR LANGUAGE Display SET UP CH screen. C H CLOCK EX I T VOL SELECT : KEY SET : ACT I ON KEY C H C H
+VOL 1) Press to select CH. 2) Press ACTION to display. SET UP CHANNEL ANTENNA : CABLE AUTO SET CHANNEL CAPT I ON WEAK S I GNAL CABLE BOX SET UP VCR P l u s+ CH SET UP GNAL D I SPLAY SELECT : KEY SET : KEY END : ACT I ON KEY SPLAY : OFFOFF Select WEAK SIGNAL DISPLAY. VOL C H C H
+VOL to 1) Press select. 2) Press to set ON or OFF. Notes ON = Picture is displayed regardless of signal condition, and may not always be clearly visible. OFF = Screen turns solid blue when signal is absent or weak. VOL C H C H
+VOL
R C V SET SELECT 2 3
:CH UP
:CH DOWN
:VOL UP
:VOL DOWN ACTION 1 2 4 If unit is connected to equipment which has blue back feature, selecting ON will have no effect on the other equipment. Return to the normal screen. Press ACTION twice. Model PV-C2060 unit is shown here. VCR Lock All operations are prohibited except Timer recording and tape eject. Useful for families with small children. VCR LOCK ACT I VATED RECREC VCR LOCK OFF To turn ON. In stop mode, hold down REC on the unit without a cassette inserted for 7 seconds. To turn OFF. Repeat above with or without cassette. POWER POWER VOLVOL CHCH STOP/EJECT REW/
STOP/EJECT REW/
PLAY/REPEAT FF/FF/
PLAY/REPEAT RECREC TIMER/FM TIMER/FM RECREC ON TIMER ON TIMER PROG TIMER PROG TIMER VIDEO IN AUDIO IN VIDEO IN AUDIO IN ACTION ACTION REC 32 VCR Lock is canceled automatically after about 24 hours if clock is set. For assistance, call 1-800-211-PANA(7262) C2060- P32-33 32 99.12.14, 11:33 PM Copy Your Tapes (Dubbing)
*Important:
if the remote control POWER, CH Up/Down, NUMBERED keys, ACTION, PROG/VCR+, DISPLAY, SEARCH, R-TUNE, FM/TV, or ADD/DLT button does not work when pressed, press COMBO button on the remote and try the button again. Connections youll need to make.
<Model PV-C2060 unit is shown here.>
Recording (Editing) unit Playing (Source) VCR AUDIO VIDEO OUT IN IN FROM ANT. OUT TO TV
<Model PV-C2080 unit is shown here.>
Playing (Source) VCR R-AUDIO-L VIDEO OUT IN MONO IN FROM ANT. OUT TO TV VIDEO IN AUDIO IN Recording (Editing) unit VIDEO IN L-AUDIO IN-R Playback (Source) VCR Recording (Editing) unit 1 2 3 4 5 Insert pre-
recorded tape. Our Vacation Insert blank tape with record tab. Dubbing tapes protected with Copy Guard will have poor quality results. Select LINE mode. See Selecting Input Mode section on page 13. PLAY PAUSE PLAY STOP EJECT Put in Standby mode. Press PLAY then PAUSE at starting point. Start dubbing. Press PLAY. Stop dubbing. Press STOP/
EJECT. Put in Standby mode. Press REC, then PAUSE/SLOW immediately. Start dubbing. Press PAUSE/SLOW. Stop dubbing. Press STOP. A d v a n c e d O p e r a t i o n Caution Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement. 33 C2060- P32-33 33 99.12.14, 11:33 PM FM Radio FM Radio Setup 1 2 3 Display FM radio mode. Press FM/TV* on the remote or TIMER/FM twice on the unit. FM Radio is ... This unit has an FM radio with built-in antenna, 9 station preset, and a band range of 87.5 ~ 108.1 MHz. You can even set the On-Timer (page 20) to wake up to your favorite radio station. Model PV-C2060 unit is shown here. 1 2 : 0 0PM Select the FM number. FM 1 87. 5MHz Press a NUMBERED key
(1~9.) 1 2 : 0 0PM Set the radio station. 1) Press CH FM 1 8 7. 7MHz MEMORY : PUSH ADD / DLT KEY C H C H to select the desired radio station.
(Each press changes frequency 200 kHz.) 2) Press ADD/DLT to set. or Quick Station Scan Hold down CH seconds, then release to scan for FM stations in your area. To cancel, press CH in search mode. for a few while or 1 2 : 0 0PM FM 1 8 7. 7MHz MEMOR I ZED To Make Corrections, select station with a NUMBERED key, then do step 3 again. To exit FM mode, press FM/TV on the remote or TIMER/FM twice on the unit. VIDEO IN AUDIO IN VIDEO IN AUDIO IN POWER VOL CH STOP/EJECT REW/
PLAY/REPEAT FF/
REC TIMER/FM POWER VOL CH STOP/EJECT REW/
PLAY/REPEAT FF/
REC TIMER/FM REC ON TIMER PROG TIMER REC ON TIMER PROG TIMER ACTION ACTION 1 TIMER/FM FM ANTENNA Setup Make sure FM tuning is done correctly
(See FM Radio Setup.) a b Display MAIN MENU. Press ACTION. M A I N MENU Display SET UP TV screen. T V C H VCR LANGUAGE CLOCK EX I T SELECT : KEY SET : ACT I ON KEY VOL C H C H
+VOL 1) Press to select TV. 2) Press ACTION to display. 34 For assistance, call 1-800-211-PANA(7262) C2060- FM TRANSMITTER(P34-37) 34 99.12.14, 11:32 PM Continued on the next page...
*Important:
if the remote control POWER, CH Up/Down, NUMBERED keys, ACTION, PROG/VCR+, DISPLAY, SEARCH, R-TUNE, FM/TV, or ADD/DLT button does not work when pressed, press COMBO button on the remote and try the button again. to Model PV-C2060 unit is shown here. c SET UP TV LOCK CAPT I ON INPUT SELCT : TUNER V I DEO ADJUST FM ANTENNA SELECT : KEY SET : KEY END : ACT I ON KEY ANTENNA : I NTNT
<For Model PV-C2060 only>
Select FM ANTENNA. VOL C H C H
+VOL 1) Press select. 2) Press to select INT
(INTERNAL) or EXT (EXTERNAL) whichever sounds the best. I For cable TV users INT I For antenna users EXT d End setup. Press ACTION twice to exit. Using FM Radio Display FM radio mode. Press FM/TV on the remote or TIMER/FM twice on the unit. 1 2 : 0 0PM Select the FM number. A B VIDEO IN AUDIO IN VIDEO IN AUDIO IN POWER VOL CH STOP/EJECT REW/
PLAY/REPEAT FF/
REC TIMER/FM POWER VOL CH STOP/EJECT REW/
PLAY/REPEAT FF/
REC TIMER/FM REC ON TIMER PROG TIMER REC ON TIMER PROG TIMER ACTION ACTION A TIMER/FM A FM/TV A d v a n c e d O p e r a t i o n FM 1 87. 5MHz Press a NUMBERED key
(1~9) to select a preset station
(see steps 2 and 3 on the previous page.) VOL C H C H
+VOL
R C V To cancel, press FM/TV on the remote or TIMER/FM twice on the unit. Notes Once stations are set, the selected station and current time are displayed when FM Radio mode is entered. To remove time, press DISPLAY. If DISPLAY is pressed, the unit status screen appears. B NUMBERED Keys DISPLAY AUDIO To select Audio Mode for FM Radio 1 2 : 0 0PM STEREO MONO FM 1 8 7. 7MHz Select STEREO or MONO. Press AUDIO repeatedly in FM Radio mode. Notes FM radio cannot be recorded on a Video cassette. You may get better reception by repositioning the unit. You cannot select FM Radio mode during playback or record, or while a blue back
(PROG, ACTION, MENU) screen is displayed. 35 C2060- FM TRANSMITTER(P34-37) 35 99.12.14, 11:32 PM FM Transmitter FM Transmitter is ... a feature whereby this units sound signal can be heard on your FM Radio. First, tune your radio to a frequency (93 ~ 97, 99 ~
103 MHz) that is not being broadcast on by a radio station. Then, set this unit to the same carry frequency (see below.) Now, fine-tune your radio so the sound comes in clearly. FM Transmitter Carry Frequency Setup Display MAIN MENU. Press ACTION*. M A I N MENU Display SET UP TV screen. T V C H VCR LANGUAGE CLOCK EX I T VOL C H C H
+VOL SELECT : KEY SET : ACT I ON KEY 1) Press to select TV. 2) Press ACTION to display.
<For Model PV-C2080 only>
Send Wireless POWER POWER VOLVOL CHCH STOP/EJECT REW/
STOP/EJECT REW/
PLAY/REPEAT FF/FF/
PLAY/REPEAT RECREC TIMER/FM TIMER/FM RECREC ON TIMER ON TIMER PROG TIMER PROG TIMER VIDEO IN VIDEO IN R L AUDIO IN AUDIO IN ACTION ACTION Within 157 inch Audio equipment with FM Radio Carry Frequency : 93 ~ 97, 99 ~ 103 MHz FM Transmitter ON/OFF steps 1~3. (See left.) 1 Do FM Transmitter Carry Frequency 2 SET UP FM FM ANTENNA : INT FM TRANSMITTER FM TRANSMITTER : ON: ON SET UP FM TRANSMITTER SPKR W/FM TRANS : OFF Select SET UP FM TRANSMITTER. 1) Press SELECT : KEY SET : KEY END : ACT I ON KEY VOL C H C H
+VOL to select. 2) Press to set ON or OFF. SET UP TV LOCK CAPT I ON I NPUT SELECT : TUNER V I DEO ADJUST SET UP FM SPEAKER : ON SELECT : KEY SET : KEY END : ACT I ON KEY SET UP FM FM ANTENNA : INT FM TRANSMITTER : ON SET UP FM TRANSMITTER SPKR W/FM TRANS : OFF SELECT : KEY SET : KEY END : ACT I ON KEY Select SET UP FM. 1) Press VOL C H C H
+VOL to select. 2) Press to display. Select SET UP FM TRANSMITTER. VOL C H C H
+VOL 1) Press to select. 2) Press display. to When step 4 is done, FM TRANSMITTER is automatically set to ON. SET UP FM TRANSMITTER Set the Carry Frequency. 93MHz - 97MHz 99MHz - 103MHz 93MHz 97MHz SELECT : KEY SET : KEY END : ACT I ON KEY SET UP FM TRANSMITTER 93MHz - 97MHz 99MHz - 103MHz 99MHz 103MHz SELECT : KEY SET : KEY END : ACT I ON KEY The selector bar returns to center position when frequency range is switched. To Make Corrections, select frequency with CH VOL C H C H
+VOL 1) Press to select the desired frequency range.
(93-97 or 99-103MHz) 2) Press to select the Carry Frequency. 3) Press ACTION to set.
(Then screen in step 4 is redisplayed.)
, then repeat step 5. End setup Press ACTION three times. 3 End setup Press ACTION three times. Speaker with FM Transmitter ON/OFF steps 1~3. (See left.) 1 Do FM Transmitter Carry Frequency 2 SET UP FM FM ANTENNA : INT FM TRANSMITTER : ON SET UP FM TRANSMITTER SPKR W/FM TRANS SPKR W/FM TRANS : ON: ON Select Speaker with Transmitter. 1) Press SELECT : KEY SET : KEY END : ACT I ON KEY VOL C H C H
+VOL to select. 2) Press to set ON or OFF. If you select... I ON Internal Speaker ON with Transmitter I OFF Internal Speaker MUTE with Transmitter Notes This operation has effect only when FM TRANSMITTER : ON (see above.) If SPKR W/FM TRANS : OFF, the MUTE and VOLUME key will not function. 3 End setup Press ACTION three times. Notes The Carry Frequency shown by the selector bar is a guide only. Please listen to the sound and adjust accordingly. The unit will transmit sound when unit power is on and FM TRANSMITTER : ON is selected. When unit power is turned off, FM TRANSMITTER returns to OFF setting. Please put your FM Radio within 157 inch of the unit. Interference occurs when you select CATV channels 95, 96, or 97, while FM Transmitter is operating. FM Transmitter will not work in FM Radio Mode. For assistance, call 1-800-211-PANA(7262) 1 2 3 4 5 6 36 C2060- FM TRANSMITTER(P34-37) 36 99.12.14, 11:32 PM Picture Adjustment 1 Display MAIN MENU. Press ACTION.
*Important:
if the remote control POWER, CH Up/Down, NUMBERED keys, ACTION, PROG/VCR+, DISPLAY, SEARCH, R-TUNE, FM/TV, or ADD/DLT button does not work when pressed, press COMBO button on the remote and try the button again. 2 3 M A I N MENU Display SET UP TV screen. T V C H VCR LANGUAGE CLOCK EX I T VOL C H C H
+VOL SELECT : KEY SET : ACT I ON KEY 1) Press to select TV. 2) Press ACTION to display. SET UP TV LOCK CAPT I ON I NPUT SELECT : TUNER V I DEO ADJUST FM ANTENNA : I NT SELECT : KEY SET : KEY END : ACT I ON KEY Display VIDEO ADJUST screen. VOL C H C H
+VOL 1) Press select. 2) Press display. to to
<For Model PV-C2060 only>
4 COLOR T I NT BR I GHTNESS P I CTURE SHARPNESS NORMAL SELECT : KEY ADJUST : KEY END : ACT I ON KEY COLOR T I NT BR I GHTNESS P I CTURE SHARPNESS NORNORMALAL SELECT : KEY SET : KEY END : ACT I ON KEY Adjust desired item. VOL C H C H
+VOL 1) Press to select an item.
(See below right.) 2) Press to adjust. To Reset Picture Controls. Press and set NORMAL. All controls return to their factory settings. to select and 5 End setup. Press ACTION three times to exit. VOL C H C H
+VOL
R C V SET SELECT 2 3
:CH UP
:CH DOWN 4
:VOL UP
:VOL DOWN ACTION 1 2 5 A d v a n c e d O p e r a t i o n Picture Adjustment I COLOR Control Adjust color intensity. I TINT Control Adjust for natural flesh tones. I BRIGHTNESS Control Adjust picture brightness. I PICTURE Control Adjust picture intensity by adjusting both contrast and color level in the proper balance. I SHARPNESS Control Adjust picture sharpness. 37 C2060- FM TRANSMITTER(P34-37) 37 99.12.14, 11:32 PM
1 | User Manual | Users Manual | 783.00 KiB | / September 02 2000 |
| C2060- PO1(HOUKI) Panasonic Combination VCR Omnivieion Mis! Operating Instructions Models No. PV-C2060 / PV-C2080
-TENTATIVE-
EXHIBIT #
FIG FCC MODEL OUR REF :
As an ENERGY STAR? Partner, e Matsushita Electric Corporation of TS America has determined that this R Grergge product or product model meets the ENERGY STAR? guidelines for . energy efficiency. Easy Taping. Please read these instr before attempting to connect, operate or adjust this product. Please save this manual. Spanish Quick Use Guide is included. (Guia para rapida consulta en espafiol esta incluida.) LSQTO185A For assistance, call 1-800-211-PANA(7262) 1 99.11.4, 10:24 AM Ey ELAM OL eb P19) uoljesadg oiseg pa a.
Sy) 3 3) a. O x]
o) on) S) o
=) UOI]JEWOJU] INOA 404
| C2060- P02-7 3 99.11.3, 5:40 AM Safety Precautions/Mesures de scurit Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Avertissement: Afin de prvenir tout risque dincendie ou de chocs lectriques, ne pas exposer cet appareil a la pluie ou a une humidit excessive. Attention: Pour viter les chocs lectriques, introduire la lame la plus large de Ia fiche dans la borne correspondante de la prise et pousser jusquau fond. This video recorder, equipped with the HQ (High Quality) System, is compatible with existing VHS equipment. Only use those tapes with the mark. It is recommended that only cassette tapes that have been tested and inspected for use in 2, 4, 6, and 8 hour VCR machines be used. This television receiver provides display of television closed captioning in accordance with 15.119 of the FCC rules. FCC WARNING: Any unauthorized changes or modifications to this equipment would void the users authority to operate. This symbol warns the user that uninsulated e7NCH IC] voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind CAUTION: TO REDUCE THE RISK of contact with any inside part of this unit. This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems. OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
| C2060- P02-7 ion!
Important Safeguards and Precautions ... 2 Before Using................ sesasneeeesess 6 ACCOSSOMES oo. esecssenscsesserseesseee 6 Record/Playback Time ............. 6 Loading the Batteries .............. 6 * Prevent Accidental Tape Erasure .. 6 TV Operation............ aaseneeeanes veseeee 10
(Main Operation, NIGHT (NITE) Mode, Using the 100 Key, Rapid Tune, Audio Mute, Phones, SELF-DEMO Mode) MTS Broadcast /
TV Stereo System. ...cscscccceccccssees 11
(Stereo/SAP/Mono broadcast, Select Audio Mode for TV Viewing) Timer Recording .......... veneeee 14 ~ 15
(Main Operation, Cancel, Replace or Clear Program Contents) Timer Program using VCR Plus+ System weneees wessese 16 ~ 19 CABLE BOX SETUP .........ssecssesseeens VCR Plus+ Channel Setup .............-++ 13 VCR Plus+ System Programming deteeese 19 TV Timer Features......... avenues 20 ~ 21 ON-TIMER with Alariny .........sccescsssessers 20 SLEEP TIMER .......ccccsssssesssetsessenseeenees 21 INSTANT ALARM ........ccccccecereseseseeseeees 21 Closed Caption System wes 22 ~ 23 Closed Caption Mode Feature ............. Caption On Mute Feature ......... eee 38 Tape Operation...........00008 24 ~27 Commercial Skip ............ce 24 = Zero S@AaNCH ce. eeeeeeeeesseeeeee 25
* Program End Search... 24 ~~ Auto Operation Functions ........ 25 Tape Position ........scssseseeee 24 VHS Index Search System .. 26, 27 Repeat Play ........sscsseseresene 25 Reset Language, Channels, Clock... 46 On-Screen Display (OSD) ...........47 Unit Information........:..::ccccesessseee 48 Before Requesting Service ........ 49 For assistance, call 1-800-211-PANA(7262) 99.11.3, 5:40 AM Connections BEBEEBEE SeEanauue BESS R ESET TREES ETE ECT ERROR Ree nuaneceuas 7 +e
* Outdoor Antenna Connections ...........eeese: 7 =
DSS/Cable box Connections .....0... ee 7 oe
. One Time Setup SECRETE RRBESTECRSRRERSEERERTRECRER RRR RRR Bennee 8 ~ 9 =
(Language, Channel, Clock) A Playback a Tape.......... sesessaneesseseeseseseseeseesnns eneunenenees 12 fy
(Main Operation, Forward or Reverse Search, Still Picture, Slow Motion, Frame by Frame Advance, nae Features for a Quality Picture) rd oO Record ON & Tape ........0ccccesssseeeesceeeeeesnseenceneeesuerseeens 13 Ee
(Main Operation, One Touch Recording(OTR), Selecting Input Mode) 2 oi Special VCR Features........ssscsse sunesuananeneneees was 28 ~ 32 Channel Caption ............0 28,29 Weak Signal Display ON/OFF ...32 Time Stamp ....ceeeeeeeeees 30,31 @ VOR LOCK... ces eeeteeeeeteneeeeee 32 Copy Your Tapes (DUDDING) ..........:c:.:esceereereeenssees 33
. Bo
@ FM Radio BEBEGBSBBEEEEES Ssuseaseacea BESOEEBSEEGEES SU NR RBRBREOEEE BSsuneans 34 ~ 35 Lo FM Radio Setup... 34 Using FM Radio .........cessseee 35 ~
FM ANTENNA Setup........0-.-0- 34 To select Audio Mode for FM Radio... 35 FM Transmitter (For Model PV-C2080 onlly)............++ 36
(FM Transmitter Carry Frequency Setup, FM Transmitter Setup, Speaker with FM Transmitter Setup) o Picture AGjUStMENE ........:eeceeceseceeesseeeeenseeneensenenenens 37 BS
. ) V-Chip Control Feature ............cceccssscsssenssesenes 38 ~ 41 Ih
* Enter Secret Code -..scsecssee 38 Setup US TV PROGRAMS Ratings .. 40 asl Setup US MOVIES Ratings.....39 Blocking Message... 41 Ss Cable Box Universal Remote Control Feature ..... 42 ~ 43
* The Universal Remote Control Setup ...42 Remote Waring ON/OFF ........:ssssss0 Using the Universal Remote Controls..42 * DSS/Cable Box Brand Code Numbers ... 3 Audio Feature (For Model PV-C2080 only). auucneneens 44 ~ 45. a s mu Service Center List....... nseeeeeenss asteeenenees eeneenenes ssssres 00 -
a a s Spanish Quick Use Guide. .............. ee OL~ OS By
. i) Location of Controls BEGEEE SSGREBEBEGESS See URE BEBE BeE RBBSBSBBEEGaE eanteanas 54 g Warrant ....ccccscsssssssessssrssessesssessesseenseseas Back Cover I a]
| G2060- P02-7 5 99.11.3, 5:40 AM |
Connections Outdoor Antenna Connection io
: a Unhook the antenna from your ve We Band. J =
previous TV or VCR and connect it to (Flat) Twin Lead ixer (not supplied) ce the back of the unit as shown in the 300 Ohm Cable rs wm diagram. (Round) 75 Ohm ay If your antenna system has separate coaxial Cable as UHF and VHF lead-ins, you need a ae) Ly UHF/VHF Band Mixer (not supplied.) = # ;j We________ or from . WARNING: Antenna Transformer ({{@--~-----~
When using Nut type RF coaxial (not supplied) cables, tighten with fingers only. Overtightening may damage terminals. (Flat) Twin Lead Back of unit 300 Ohm Cable <Model PV-C2060 unit is shown here>
DSS/Cable box Connections
@ Without a Cable Box You can;
* record or view unscrambled channels. You cannot;
record or view scrambled channels. view a channel other than the one selected for any type of recording.
@ With a Cable Box You can;
record or view any channel including scrambled channels. NOTE: Channel selection must be made at the cable box. You cannot;
* view a channel other than the one selected for any type of recording. do a Timer recording of a channel unless you select it Cable Box at the cable box. r Note to CABLE System Installer This reminder is provided to call the CABLE (Cable TV) System installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. H@ With a DSS Receiver You can;
record or view any channel including scrambled channels. NOTE: Channel selection must be made at the DSS Receiver. You cannot;
* view a channel other than the one selected for any type of recording. do a Timer recording of a channel unless you select it at the DSS box. NOTE: The DSS receiver must be turned off to view programs from a cable box or antenna. See the DSS manual for details. DSS Receiver
| C2060- P02-7 7 99.11.3, 5:41 AM |
FM Radio Display FM radio mode. un) Press FM/TV* on the remote or TIMER/FM twice on the unit. Select the FM number. Press a O@O NUMBERED key Ooo Set the radio station. 1) Press CH AV Cap to select the oe desired radio station. ADDYDLT (Each press changes
(Co) frequency 200 kHz.) 2) Press ADD/DLT to set. Quick Station Scan Hold down CH A or for a few seconds, then release to
* To cancel, press CH & or W while in search mode. To Make Corrections, select station with a NUMBERED key, then do step 3 again. To exit FM mode, press FM/TV on the remote or TIMER/FM twice on the unit. FM ANTENNA Setup Make sure FM tuning is done correctly
(See FM Radio Setup.) a 4 Display MAIN MENU. O Press ACTION. Display SET UP TV screen. 1) Press AV-<4 >
to select TV. 2) Press ACTION to display. scan for FM stations in your area. FM Radio is ... This unit has an FM radio with built-in antenna, 9 station preset, and a band range of 87.5 ~ 108.1 MHz. You can even set the On-Timer (page 20) to wake up to your favorite radio station. Model PV-C2060 unit is shown here. ape CL BSS S a TIO) rT 5 1 TIMER/FM 1 et SSET SELECT a:CH UP
* w:CH DOWN C>:voL up 4:VOL DOWN AactION 2 NUMBERED Key J Sapp0it Continued on the next page... 34 For assistance, cal! 1-800-211-PANA(7262)
| C2060- P34-37 34 99.11.4, 10:31 AM
~Important: if the remote control POWER, CH Up/Down, NUMBERED keys, ACTION, PROG/VCR+, DISPLAY, SEARCH, R-TUNE, FM/TV, or ADD/DLT button does not work when pressed, press COMBO button on the remote and try the button again. Select FM ANTENNA. 1) Press AV to select. 2) Press to select INT
(INTERNAL) or
<For Model PV-C2060 only> EXT (EXTERNAL) whichever sounds the best. Model PV-C2060 unit is shown here.
@ For cable TV users > INT
@ For antenna users > EXT End setup. 4 O Press ACTION twice to exit. A TIMER/FM Using FM Radio Display FM radio mode.
(wm) Press FM/TV on the remote or TIMER/FM twice on the unit. Acw TV Select the FM number. Press a OO DOO NUMBERED key
(1~9) to select a
| preset station
(see steps 2 and 3 on the previous page.) To cancel, press FM/TV on the remote or TIMER/FM twice on the unit. Byumserep Ton =siclel@ we er=selel-7iNehy/
Key Once stations are set, the selected station and current time are displayed when FM Radio mode is entered. To remove time, press DISPLAY. lf DISPLAY is pressed, the unit status screen appears. AUDIO To select Audio Mode for FM Radio Select STEREO or MONO. QUgp FM radio cannot be recorded on a Video repeatedly in FM casts |
pe y You may get better reception by Radio mode. repositioning the unit. You cannot select FM Radio mode during playback or record, or while a blue back
(PROG, ACTION, MENU) screen is displayed.
* If SEARCH is pressed while in the FM Radio mode, you will not be able to select other stations with the NUMBERED keys.
| C2060- P34-37 35 ; 99.11.4, 10:31 AM |
7 FM Transmitter is .. a feature whereby this unit's 's sound signal can be heard on your FM Radio. Tune the same carry frequency of this unit, after the frequency of your Radio is set. (88.1 ~ 107.9MHz.) (Please choose frequency that is not used by other radio station.) Fine-tune the frequency of your Radio that sound is clear. FM Transmitter Carry Frequency Setup 1 A Display MAIN MENU. Press ACTION. O Display SET UP TV 1) Press AV< >
to select TV". 2) Press ACTION to display. Select SET UP FM. 1) Press AV to select. 2) Press >
to display. Select SET UP FM TRANSMITTER. 1) Press AV to select. 2) Press > to display. Set the Carry Frequency. 1) Press CH AT to select the desired frequency.
(Each press changes frequency 200 kHz.) 2) Press ADD/DLT to set. Frequency is set after 5 seconds, or Press ACTION to return to step 4. To Make Corrections, select frequency with a CH AV, then repeat step 5. mr! a lEndseup setup Press ACTION four times. _<For Model PV-C2080 only>
Send Wireless Audio equipment with FM Radio
[Carry Frequency : 88.1 ~ 107.9MHz | Frequency : [Carry Frequency : 88.1 ~ 107.9MHz | 1 ~ 107.9MHz FM Transmitter Setup 1 Do FM Transmitter Carry Frequency steps 1~3. (See left.) Select SET UP FM TRANSMITTER. 1) Press AV to select.
" 2) Press > to set ON or OFF. a Endsetup setup Press ACTION three times. Speaker with FM Transmitter Setup 1 Do FM Transmitter Carry Frequency steps 1~3. (See left.) Select Speaker with Transmitter. 1) Press AV to select. 2) Press to set ON or OFF. If you select... m ON = internal Speaker ON with Transmitter
@ OFF > Internal Speaker MUTE with Transmitter This operation has effect only when FM TRANSMITTER : ON (see above.) If SPKR W/FM TRANS : OFF, the MUTE and VOLUME key will not function. 3 4 The unit will transmit sound when unit power is on and FM TRANSMITTER :ON is selected. When unit power is turned off, FM TRANSMITTER returns to OFF setting. FM TRANSMITTER? can not be set and sound will not transmit when TV channels 95 - 97 are selected. Please put your FM Radio within 3 meters from the unit. End setup Press ACTION three times. For assistance, call 1-800-211-PANA(7262)
| C2060- P34-37 36 99.11.4, 10:31 AM
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2000-02-09 | 88.1 ~ 107.9 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2000-02-09
|
||||
1 | Applicant's complete, legal business name |
Panasonic Corporation of North America
|
||||
1 | FCC Registration Number (FRN) |
0003762242
|
||||
1 | Physical Address |
Two Riverfront Plaza, 9th Floor
|
||||
1 |
Newark, New Jersey 07102-5490
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
n/a | ||||||
app s | FCC ID | |||||
1 | Grantee Code |
ACJ
|
||||
1 | Equipment Product Code |
927130TX
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
B******** B****
|
||||
1 | Title |
Project Manager
|
||||
1 | Telephone Number |
201-3********
|
||||
1 | Fax Number |
201-3********
|
||||
1 |
B******@us.panasonic.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Matsushita Electrinic Corp of America
|
||||
1 | Name |
R**** M******
|
||||
1 | Physical Address |
One Panasonic Way, Panazip 4B-8
|
||||
1 |
Secaucus, New Jersey 07094
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
(201)********
|
||||
1 | Fax Number |
(201)********
|
||||
1 |
m******@panasonic.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | FM Transmitter used With TV/VCR | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Panasonic Healthcare Co., Ltd
|
||||
1 | Name |
O****** K********
|
||||
1 | Telephone Number |
81-89********
|
||||
1 |
K******@jp.panasonic.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 88.10000000 | 107.90000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC