happy holidays!

FCC ID: ACJ9TGWL22B Intel Wi-Fi 6 AX211

by: Panasonic Corporation of North America latest update: 2022-08-15 model: 9TGWL22B

Nine grants have been issued under this FCC ID from 03/31/2022 to 08/15/2022 (this is one of seventy-eight releases in 2022 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked troubleshooting guides, password defaults, drivers, warrantee terms, & instructions.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
1 2 3 4 5 6 7 8 9 User Manual Users Manual pdf 144.51 KiB May 01 2022
1 2 3 4 5 6 7 8 9 User Manual CF-33 Users Manual pdf 3.41 MiB July 29 2022 / January 25 2023 delayed release
1 2 3 4 5 6 7 8 9 SAR INTERNAL PHOTO Internal Photos pdf 133.84 KiB July 29 2022 / January 25 2023 delayed release
1 2 3 4 5 6 7 8 9 Internal Photo Internal Photos pdf 486.91 KiB July 29 2022 / January 25 2023 delayed release
1 2 3 4 5 6 7 8 9 SAR EXTERNAL PHOTO External Photos pdf 148.02 KiB July 29 2022 / January 25 2023 delayed release
1 2 3 4 5 6 7 8 9 External Photos External Photos pdf 370.42 KiB May 20 2022
1 2 3 4 5 6 7 8 9 External Photo External Photos pdf 569.16 KiB July 29 2022 / January 25 2023 delayed release
1 2 3 4 5 6 7 8 9 Label Info ID Label/Location Info pdf 126.13 KiB May 20 2022
1 2 3 4 5 6 7 8 9 Label location ID Label/Location Info pdf 202.23 KiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 1 C2PC Change Letter R rev2 Cover Letter(s) pdf 557.06 KiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 2 Agent Authorization Letter rev1 Cover Letter(s) pdf 563.59 KiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 3 Request for Confidentiality letter FCCID rev1 Cover Letter(s) pdf 558.63 KiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 4 FCC Modular Approval Declaration letter rev.3.2 Cover Letter(s) pdf 102.01 KiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 Power reduction verification REV RF Exposure Info pdf 384.00 KiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 SAR Report FCC REV RF Exposure Info pdf 3.19 MiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 WI-FI 6E RF Exposure RF Exposure Info pdf 4.23 MiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 SAR Setup Photos Test Setup Photos pdf 404.64 KiB July 29 2022 / January 25 2023 delayed release
1 2 3 4 5 6 7 8 9 Antenna Gain Report R Test Report pdf 75.66 KiB September 06 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 Antenna Specification Test Report pdf 477.97 KiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 Theory of Operation CF-33 Rev3 Operational Description pdf July 29 2022 confidential
1 2 3 4 5 6 7 8 9 Theory of Operation CF-33 Rev4a Operational Description pdf August 08 2022 confidential
1 2 3 4 5 6 7 8 9 Tune Up Procedure of CF-33 Final FCC Parts List/Tune Up Info pdf July 29 2022 confidential
1 2 3 4 5 6 7 8 9 Tune up Procedure Bluetooth Parts List/Tune Up Info pdf July 29 2022 confidential
1 2 3 4 5 6 7 8 9 Agent Authorization Letter Cover Letter(s) pdf 106.53 KiB May 20 2022
1 2 3 4 5 6 7 8 9 Authorization Letter from Original Cert. Holder Cover Letter(s) pdf 125.97 KiB May 20 2022
1 2 3 4 5 6 7 8 9 Change in ID Request Letter Cover Letter(s) pdf 94.73 KiB May 20 2022
1 2 3 4 5 6 7 8 9 Operational Description pdf May 01 2022
1 2 3 4 5 6 7 8 9 Software Security Documentation SDR Software/Security Inf pdf May 01 2022 confidential
1 2 3 4 5 6 7 8 9 User Manual Users Manual pdf 144.51 KiB May 01 2022
1 2 3 4 5 6 7 8 9 User Manual CF-33 Users Manual pdf 3.41 MiB July 29 2022 / January 25 2023 delayed release
1 2 3 4 5 6 7 8 9 SAR INTERNAL PHOTO Internal Photos pdf 133.84 KiB July 29 2022 / January 25 2023 delayed release
1 2 3 4 5 6 7 8 9 Internal Photo Internal Photos pdf 486.91 KiB July 29 2022 / January 25 2023 delayed release
1 2 3 4 5 6 7 8 9 SAR EXTERNAL PHOTO External Photos pdf 148.02 KiB July 29 2022 / January 25 2023 delayed release
1 2 3 4 5 6 7 8 9 External Photos External Photos pdf 370.42 KiB May 20 2022
1 2 3 4 5 6 7 8 9 External Photo External Photos pdf 569.16 KiB July 29 2022 / January 25 2023 delayed release
1 2 3 4 5 6 7 8 9 Label Info ID Label/Location Info pdf 126.13 KiB May 20 2022
1 2 3 4 5 6 7 8 9 Label location ID Label/Location Info pdf 202.23 KiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 1 C2PC Change Letter R rev2 Cover Letter(s) pdf 557.06 KiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 2 Agent Authorization Letter rev1 Cover Letter(s) pdf 563.59 KiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 3 Request for Confidentiality letter FCCID rev1 Cover Letter(s) pdf 558.63 KiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 4 FCC Modular Approval Declaration letter rev.3.2 Cover Letter(s) pdf 102.01 KiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 Power reduction verification REV RF Exposure Info pdf 384.00 KiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 SAR Report FCC REV RF Exposure Info pdf 3.19 MiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 WI-FI 6E RF Exposure RF Exposure Info pdf 4.23 MiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 SAR Setup Photos Test Setup Photos pdf 404.64 KiB July 29 2022 / January 25 2023 delayed release
1 2 3 4 5 6 7 8 9 Antenna Gain Report R Test Report pdf 75.66 KiB September 06 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 Antenna Specification Test Report pdf 477.97 KiB July 29 2022 / August 15 2022
1 2 3 4 5 6 7 8 9 Agent Authorization Letter Cover Letter(s) pdf 106.53 KiB May 20 2022
1 2 3 4 5 6 7 8 9 Authorization Letter from Original Cert. Holder Cover Letter(s) pdf 125.97 KiB May 20 2022
1 2 3 4 5 6 7 8 9 Change in ID Request Letter Cover Letter(s) pdf 94.73 KiB May 20 2022

frequency equipment class purpose
1 2022-08-15 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II Permissive Change
2 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
3 2422 ~ 2462 DTS - Digital Transmission System
4 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 2022-05-20 JBP - Part 15 Class B Computing Device Peripheral Change in Identification
6 2022-05-01 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Change in identification of presently authorized equipment. Original FCC ID: PD9AX211NG Grant Date: 04/26/2021
7 2022-03-31 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Change in Identification
8 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
9 2422 ~ 2462 DTS - Digital Transmission System

Application Forms

app s Applicant Information
1 2 3 4 5 6 7 8 9 Effective 2022-08-15
1 2 3 4 5 6 7 8 9 2022-05-20
1 2 3 4 5 6 7 8 9 2022-05-01
1 2 3 4 5 6 7 8 9 2022-03-31
1 2 3 4 5 6 7 8 9 Applicant's complete, legal business name Panasonic Corporation of North America
1 2 3 4 5 6 7 8 9 FCC Registration Number (FRN) 0003762242
1 2 3 4 5 6 7 8 9 Physical Address Two Riverfront Plaza, 9th Floor
1 2 3 4 5 6 7 8 9 Newark, NJ
1 2 3 4 5 6 7 8 9 Newark, New Jersey 07102-5490
1 2 3 4 5 6 7 8 9 United States
app s TCB Information
1 2 3 4 5 6 7 8 9 TCB Application Email Address k******@hctamerica.com;charvey@ieee.org
1 2 3 4 5 6 7 8 9 T******@hctamerica.com
1 2 3 4 5 6 7 8 9 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
1 2 3 4 5 6 7 8 9 A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
1 2 3 4 5 6 7 8 9 Grantee Code ACJ
1 2 3 4 5 6 7 8 9 Equipment Product Code 9TGWL22B
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 7 8 9 Name B******** B******
1 2 3 4 5 6 7 8 9 Title Project Manager
1 2 3 4 5 6 7 8 9 Telephone Number 201-3********
1 2 3 4 5 6 7 8 9 Fax Number 201-3********
1 2 3 4 5 6 7 8 9 E-mail B******@us.panasonic.com
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 5 6 7 8 9 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 8 9 No
1 2 3 4 5 6 7 8 9 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 8 9 No
1 2 3 4 5 6 7 8 9 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)01/25/2023
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 7 8 9 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 7 8 9 Equipment Class6XD - 15E 6 GHz Low Power Indoor Client
1 2 3 4 5 6 7 8 9 NII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6 7 8 9 DTS - Digital Transmission System
1 2 3 4 5 6 7 8 9 DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 7 8 9 JBP - Part 15 Class B Computing Device Peripheral
1 2 3 4 5 6 7 8 9 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Wi-Fi 6 AX211
1 2 3 4 5 6 7 8 9 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?Yes
1 2 3 4 5 6 7 8 9 No
1 2 3 4 5 6 7 8 9 Modular Equipment TypeSingle Modular Approval
1 2 3 4 5 6 7 8 9 Does not apply
1 2 3 4 5 6 7 8 9 Purpose / Application is forClass II Permissive Change
1 2 3 4 5 6 7 8 9 Change in Identification
1 2 3 4 5 6 7 8 9 Change in identification of presently authorized equipment. Original FCC ID: PD9AX211NG Grant Date: 04/26/2021
1 2 3 4 5 6 7 8 9 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 7 8 9 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 7 8 9 Grant CommentsClass II Permissive to address RF Exposure in the Panasonic Convertible PC Model CF-33, as documented in this filing. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes. Host: The highest reported SAR for body-supported and simultaneous transmission exposure conditions in this CF-33 host are 0.64 W/kg and 0.65 W/kg, respectively.
1 2 3 4 5 6 7 8 9 Class II Permissive to address RF Exposure in the Panasonic Convertible PC Model CF-33, as documented in this filing. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Host: The highest reported SAR for body-supported and simultaneous transmission exposure conditions in this CF-33 host are 1.20 W/kg and 1.20 W/kg, respectively.
1 2 3 4 5 6 7 8 9 Class II Permissive to address RF in the Panasonic Convertible PC Model CF-33, as documented in this filing. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Host: The highest reported SAR for body-supported and simultaneous transmission exposure conditions in this CF-33 host are 1.32 W/kg and 1.32 W/kg, respectively.
1 2 3 4 5 6 7 8 9 Class II Permissive to address RF in the Panasonic Convertible PC Model CF-33, as documented in this filing. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Host: The highest reported SAR for body-supported and simultaneous transmission exposure conditions in this CF-33 host are 0.29 W/kg and 1.32 W/kg, respectively.
1 2 3 4 5 6 7 8 9 Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.
1 2 3 4 5 6 7 8 9 Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 8 9 Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 8 9 Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 8 9 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 7 8 9 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 7 8 9 Firm Name HCT Co., Ltd.
1 2 3 4 5 6 7 8 9 Intel Corporation S.A.S.
1 2 3 4 5 6 7 8 9 Name L**** Y********
1 2 3 4 5 6 7 8 9 N**** A******
1 2 3 4 5 6 7 8 9 Telephone Number 82-31********
1 2 3 4 5 6 7 8 9 00334********
1 2 3 4 5 6 7 8 9 Fax Number 82-31********
1 2 3 4 5 6 7 8 9 E-mail y******@hct.co.kr
1 2 3 4 5 6 7 8 9 n******@intel.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC EP MO 5955 7115 0.003
1 2 15E CC EP MO 5965 7085 0.007
1 3 15E CC EP MO 5985 7025 0.012
1 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E CC MO 5180 5240 0.152
2 2 15E CC MO 5190 5230 0.182
2 3 15E CC MO 5210 5210 0.093
2 4 15E CC MO 5250 5250 0.064
2 5 15E CC MO ND 5260 5320 0.152
2 6 15E CC MO ND 5270 5310 0.194
2 7 15E CC MO ND 5290 5290 0.088
2 8 15E CC MO ND 5500 5700 0.154
2 9 15E CC MO ND 5510 5670 0.249
2 1 15E CC MO ND 5710 5710 0.122
2 11 15E CC MO ND 5720 5720 0.104
2 12 15E CC MO ND 5530 5690 0.215
2 13 15E CC MO 5745 5825 0.254
2 14 15E CC MO 5755 5795 0.257
2 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402 2480 0.009
3 2 15C CC MO 2412 2472 0.979
3 3 15C CC MO 2422 2462 0.836
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15B
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC EP MO 5955 7115 0.003
6 2 15E CC EP MO 5965 7085 0.007
6 3 15E CC EP MO 5985 7025 0.012
6 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E MO 5180 5240 0.152
8 2 15E MO 5190 5230 0.182
8 3 15E CC MO 5210 5210 0.093
8 4 15E CC MO 5250 5250 0.064
8 5 15E CC MO ND 5260 5320 0.152
8 6 15E CC MO ND 5270 5310 0.194
8 7 15E CC MO ND 5290 5290 0.088
8 8 15E CC MO ND 5500 5700 0.154
8 9 15E CC MO ND 5510 5670 0.249
8 1 15E CC MO ND 5710 5710 0.122
8 11 15E CC MO ND 5720 5720 0.104
8 12 15E CC MO ND 5530 5690 0.215
8 13 15E CC MO 5745 5825 0.254
8 14 15E CC MO 5755 5795 0.257
8 15 15E CC MO 5775 5775 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402 2480 0.009
9 2 15C CC MO 2412 2472 0.979
9 3 15C MO 2422 2462 0.836

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC