FCC ID: ACJ9TGWL23A Intel Wi-Fi 6 AX211

FCC ID ACJ9TGWL23A WLAN+BT module adapter Model number: WL23A User Manual GENERAL This device is a 2x2 Wi-Fi+Bluetooth adapter. Integration to the end product 1. WL23A module is mounted on the main board. 2. Insert Antenna Unit into Antenna Connectors of WL23A module. Technical Specification a) Dimensions (W x L x H):

b) Weight:

c) IEEE WLAN Standard:

d) Bluetooth:

e) Operating Temperature:

f) Humidity:

g) Host interface:

22mm x 30mm x 2.4mm Approx. 3.0g IEEE 802.11a/b/g/n/ac/ax BDR, EDR, Low energy

-10 to 50 degree Celsius 30 to 80 %RH M.2: CNVio2 FCC ID ACJ9TGWL23A Regulatory Information Federal Communications Commission Radio Frequency Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. FOR MOBILE DEVICE USAGE (>20cm/low power) Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled FCC ID ACJ9TGWL23A environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. For 6XD (Indoor Client) a. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. b. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. This module is intended for OEM integrators only. Per FCC KDB 996369 D03 OEM Manual, the following conditions must be strictly followed when using this certified module:

KDB 996369 D03 OEM Manual rule sections:

2.2 List of applicable FCC rules This module has been tested for compliance to FCC Part 15 2.3 Summarize the specific operational use conditions The module is tested for standalone mobile RF exposure use condition. Any other usage conditions such as co-location with other transmitter(s) or being used in a portable condition will need a separate reassessment through a class II permissive change application or new certification. 2.4 Limited module procedures Not applicable. 2.5 Trace antenna designs Not applicable. 2.6 RF exposure considerations This equipment complies with FCC mobile radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. If the module is installed in a portable host, a separate SAR evaluation is required to confirm compliance with relevant FCC portable RF exposure rules. FCC ID ACJ9TGWL23A 2.7 Antennas The following antennas have been certified for use with this module; antennas of the same type with equal or lower gain may also be used with this module. The antenna must be installed such that 20 cm can be maintained between the antenna and users. Antenna Type Antenna Gain Antenna connector PIFA 5 dBi MHF4L 2.8 Label and compliance information The final end product must be labeled in a visible area with the following: Contains FCC ID: ACJ9TGWL23A. The grantee's FCC ID can be used only when all FCC compliance requirements are met. 2.9 Information on test modes and additional testing requirements This transmitter is tested in a standalone mobile RF exposure condition and any co-located or simultaneous transmission with other transmitter(s) or portable use will require a separate class II permissive change re-evaluation or new certification. 2.10 Additional testing, Part 15 Subpart B disclaimer This transmitter module is tested as a subsystem and its certification does not cover the FCC Part 15 Subpart B (unintentional radiator) rule requirement applicable to the final host. The final host will still need to be reassessed for compliance to this portion of rule requirements if applicable. As long as all conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. FCC ID ACJ9TGWL23A The end user manual shall include all required regulatory information/warning as show in this manual. OEM/Host manufacturer responsibilities OEM/Host manufacturers are ultimately responsible for the compliance of the Host and Module. The final product must be reassessed against all the essential requirements of the FCC rule such as FCC Part 15 Subpart B before it can be placed on the US market. This includes reassessing the transmitter module for compliance with the Radio and EMF essential requirements of the FCC rules. This module must not be incorporated into any other device or system without retesting for compliance as multi-radio and combined equipment The following information must be indicated on the host device of this module;

Model : WL23A FCC ID : ACJ9TGWL23A IC : 216H-CFWL23A

WLAN FCC ID: ACJ9TGWL23A IC: 216H-CFWL23A Label 1. Label for WLAN Module Model: WL23A FCC ID: ACJ9TGWL23A IC: 216H-CFWL23A 2. Label position Visible outline for Module Model: WL23A FCC ID: ACJ9TGWL23A IC: 216H-CFWL23A 1/1

Covered Equipment CFR 47 2.911 (d)(5) Attestation August 4, 2023 MSBD-23-F004 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: FCC ID: ACJ9TGWL23A for Wireless LAN Module To whom it may concern:

Panasonic Corporation of North America certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Panasonic Corporation of North America certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Ben Botros Manager Regulatory & Compliance Panasonic Corporation of North America

Ben Botros Manager Regulatory Compliance Panasonic Corporation of North America Agent Designation Attestation CFR 47 2.911 (d)(7) Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 9, 2023 Subject: FRN 0003762242 with FCC Grantee Code ACJ - Attestation Statements Part 2.911(d)(7) Panasonic Corporation of North America (the applicant) certifies that, Panasonic Corporation of North America is our designated U.S. agent for service of process for the above referenced FCC Grantee Code ACJ. Panasonic Corporation of North America accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Panasonic Corporation of North America accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for Grantee Code ACJ. Designated U.S. Agent Information:

Name: Panasonic Corporation of North America Address: Two Riverfront Plaza, Newark, New Jersey, United States Contact Person: Ben Botros Tel.: 201-348-7760 Email: [email protected] This agreement applies to all products applied by Panasonic Corporation of North America for FCC Grantee Code ACJ and is valid within the product life. Sincerely, Ben Botros Manager Regulatory & Compliance Panasonic Corporation of North America FRN 0003762242 Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel: 201-348-7760 / [email protected]

Request for Permanent Confidentiality August 4, 2023 MSBD-23-F004 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Re:

From:

To:

Change of Identification Application Intel Model AX211NG under FCC ID: PD9AX211NG Panasonic Corporation of North America Model WL23A under FCC ID: ACJ9TGWL23A To whom it may concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as permanent confidential documents from public disclosure. Software Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Thank you for your attention in this matter. Sincerely, Ben Botros Manager Regulatory and Compliance Panasonic Corporation of North America Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / [email protected]

Agent Authorization Letter August 4, 2023 MSBD-23-F004 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Re: Change of Identification Application From: Intel Model AX211NG under FCC ID: PD9AX211NG To:

Panasonic Corporation of North America Model WL23A under FCC ID: ACJ9TGWL23A To whom it may concern:

The undersigned hereby authorize Emerald Chen / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. The undersigned hereby certify that I am not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing BV CPS Taoyuan as our agent, we still recognize that we are responsible to:

a) Comply with the relevant provisions of the certification program;

Make all necessary arrangements for the conduct of the evaluation, including provision for examining b) documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

c) Make claims regarding certification only in respect of the scope for which certification has been granted;

Do not use our product certification in such a manner as to bring the Certification Division into disrepute d) and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

Upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any e) reference thereto and return any certification documents as required by the Certification Division;

f) g) Use certification only to indicate the products are certified as being in conformity with specified standards;

Endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

h) Ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / [email protected] i) Keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;

j) Take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) Document the actions taken. This Authorization is valid for a six month period from the date of this letter. This application for the subject equipment has not been submitted to another TCB for certification. Thank you for your attention in this matter. Authorized by, Ben Botros Manager Regulatory & Compliance Panasonic Corporation of North America Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / [email protected]

Federal Communications Commission 7435 Oakland Mills Road Columbia, Maryland 21046 USA Re: Change of Identification Authorization, FCC ID: PD9AX211NG Date: August 22, 2023 To Whom It May Concern:

This letter grants authorization for representatives of Panasonic Corporation of North America to apply to the FCC for a change in identification as specified under 47CFR2.933 of the FCC rules. This authorization applies to the Intel Corporation, Intel Wireless AX211, 802.11a/b/g/n/ac/ax+

BT M.2 form factor, model: AX211NGW, FCC ID: PD9AX211NG (Original grant dates:

02/17/2021(DSS, DTS), 08/29/2022(C2PC-NII), 04/26/2021(6XD), 02/17/2021 (JBP)). We are aware that Panasonic Corporation of North America intends to market the above referenced product under Panasonics own FCC ID: ACJ9TGWL23A. Sincerely, ______________________________ Benjamin Lavenant / Regulatory Engineer Intel Corporation E-mail: [email protected] Intel Corporation S.A.S. 425 Rue de Goa Le Cargo B6 06600 Antibes France Tel. +33 (0)4 93 00 14 00 - Fax +33 (0)4 93 00 14 01 SAS au capital de 5 208 026,16 Euros RCS Nanterre 302 456 199 Siret 302 456 199 00256 - TVA FR54302456199