all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 5 6 |
|
Users Manual Part 1 | Users Manual | 1.60 MiB | ||||
1 2 3 4 5 6 |
|
Users Manual Part 2 | Users Manual | 2.05 MiB | ||||
1 2 3 4 5 6 | Attestation Statements | |||||||
1 2 3 4 5 6 | Cover Letter(s) | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | External Photos | |||||||
1 2 3 4 5 6 | ID Label/Location Info | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | Test Setup Photos | |||||||
1 2 3 4 5 6 | Internal Photos | |||||||
1 2 3 4 5 6 | RF Exposure Info | |||||||
1 2 3 4 5 6 | RF Exposure Info | |||||||
1 2 3 4 5 6 | Test Setup Photos | |||||||
1 2 3 4 5 6 | Test Setup Photos | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | Attestation Statements | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | Test Report | |||||||
1 2 3 4 5 6 | Test Report |
1 2 3 4 5 6 | Users Manual Part 1 | Users Manual | 1.60 MiB |
Operating Instructions Smart Handheld EB-3901 Operating Instructions Basic Guide Tablet Computer Model No. FZ-N1 series Thank you for purchasing a Panasonic product. For optimum performance and safety, please read these instructions carefully. Table of Contents Introduction.............................................................. 3 Regulatory information................................................... 3 Handling cautions .......................................................... 5 Terms and illustrations in this document ....................... 9 Disclaimers .................................................................. 10 Getting Started....................................................... 11 Confirming the included items ..................................... 11 Description of parts...................................................... 12 Opening and closing the interface cover ..................... 16 Removing and attaching the battery cover .................. 17 Installing SIM cards (certain models only)................... 20 Installing an SD card.................................................... 21 Installing and removing the battery.............................. 23 Replacing the battery (Battery warm swap)................. 25 Charging the battery .................................................... 26 Turning the unit on and off........................................... 27 Home screen, status bar, and notifications.................. 28 Navigation and function buttons .................................. 29 Factory data reset........................................................ 30 Troubleshooting .................................................... 31 Appendix ................................................................ 35 Specifications............................................................... 35 LIMITED WARRANTY................................................. 42 LIMITED WARRANTY / GARANTIE LIMITE............. 47 2 Introduction Regulatory information Regulatory information For USA FCC RF exposure information The highest SAR value for this product as reported to the FCC when tested for use at the ear is listed below:
Highest value (W/kg) 0.54 And when worn on the body in a holder or carry case, is listed below:
Highest value (W/kg) 1.41 Introduction 3 For Canada / Pour le Canada RF exposure information The highest SAR value for this product as reported to the IC when tested for use at the ear is listed below:
Highest value (W/kg) 0.55 And when worn on the body in a holder or carry case, is listed below:
Highest value (W/kg) 1.41 Information sur lexposition aux radiofrquences (RF) La valeur de DAS la plus leve obtenue pour ce produit, telle que rapporte lIC lors des essais pour une utilisation prs de loreille, est telle que dcrite ci-dessous :
Valeur la plus leve (W/kg) 0.55 Et avec lappareil port sur soi dans un portoir ou un botier, la valeur est telle que ci-dessous :
Valeur la plus leve (W/kg) 1.41 4 Handling cautions Handling cautions General use Operating environment Temperature: Operation: -20 C to 50 C {-4 F to 122 F}
(IEC60068-2-1, 2)*1 Storage: -30 C to 70 C {-22 F to 158 F}
Humidity: Operation: 30 % to 80 % RH (No condensation) Storage: 30 % to 90 % RH (No condensation) Even within the above temperature/humidity ranges, operation for a long time in extreme environments, smoking nearby, or operation in places where oil is used or where there is a lot of dust will result in product deterioration and will shorten the product life. Also, when using the product in cold environments, the product may take longer to start up and battery operation time may be reduced. If the product is wet in temperatures of 0 C {32 F} or below, freeze damage may occur. Make sure to dry off the computer in such temperatures.
*1 Do not directly touch this product with your bare hands when using it in a hot or cold environment. Do not place the product in the following areas, as doing so may damage the product. Near electric appliances. The image may be distorted or noise may occur. This product is designed to reduce physical shock applied to the LCD and internal electrical components. However, protection against malfunction due to such shock is not guaranteed. As with any portable device, precautions should be taken to avoid any damage. When operating the screen using the dedicated stylus (sold separately), do not firmly press it down. Doing so may damage the dedicated stylus or result in scratches or dents on the screen. Do not place objects on the surface of the product or press down hard on the product with sharp objects. The screen surface may get scratched. Introduction 5 Do not scratch the rear camera, barcode reader, or flash panel. Do not use the dedicated stylus when dust or dirt (e.g., oil) is on the screen. Otherwise foreign particles on the screen/dedicated stylus may scratch the screen surface or obstruct operation of the dedicated stylus. Use the dedicated stylus only for touching the screen. Using it for any other purpose may damage the dedicated stylus and result in scratches on the screen. Confirm the safety and security of software before downloading or installing it on the product. Installing malware or viruses can cause malfunction and the disclosure of any private information stored in the product, or may cause excessive sound volume. Turn off the product before removing the SIM card or SD card. Failure to do so can result in data loss or damage to the SIM card, SD card, or product. Do not place the product near a television or radio receiver. This may cause television or radio interference. Keep the product away from magnets. Failure to do so may cause malfunction. It is illegal in many areas to record a call without permission. Always ask the other party for permission before recording a call. Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction manuals of the peripheral devices. Use peripheral devices that conform to the product's specifications. Connect to the connectors in the correct direction. If a connector is hard to insert, do not try forcibly. Check its shape, direction, alignment of pins, etc. Protecting your data To prevent accidental loss of data, we recommend that you back up any important data that you store in the product, SIM card, and SD card. To prevent the unintended disclosure of private information, always confirm the destination before sending messages, file attachments, or any other communications, such as email. 6 To prevent the unintended disclosure of sensitive information stored in the SD card, we recommend using the product's SD card encryption feature to encrypt the SD card (see the Reference Manual for more information). Before disposing of the product or handing the product over to a third party, remove the SIM card, SD card, and any other accessories. Before disposing of the product or handing the product over to a third party, perform a factory data reset (page 30) to erase any data stored in the product. Before using Wi-Fi or Bluetooth features, take appropriate action to secure your data. Waterproof/dustproof The product is waterproof/dustproof when the interface cover and headset jack cover are closed, and the battery and battery cover are attached. Therefore, keep water and dust away from product's internal components, accessories, and optional products. To prevent liquids, sand, dust, or any foreign objects from entering the product, always keep the battery cover and battery clean and make sure to firmly close the cover after opening. Take care not to get anything caught between the cover or battery and the product. If the product is exposed to water droplets, wipe them off with a dry, soft cloth and shake the product to remove the water droplets. Next, remove the battery cover, and shake the product while holding down the battery so that it does not detach to remove the water. Then, with the battery still attached, wipe off the water droplets on the battery and back side of the battery cover, and dry thoroughly. Do not leave any water droplets on the product. Water droplets may cause the micro USB port or headset jack to short circuit, or create smears on the screen. If the product is wet, wipe off the moisture before connecting with Do not dry the product with an appliance or heat source such as a peripheral devices. microwave oven or dryer. Introduction 7 Accessories Do not use in the rain or in very humid places such as bathrooms because the accessories are not waterproof/dustproof. Stop use if they are worn on the body, because the inside may corrode due to humidity from sweat and cause malfunction. Maintenance When cleaning the product, make sure to turn it off. When cleaning the product, wipe it with a soft, dry cloth. An alcohol-based disinfectant may be used if necessary. If the product is particularly dirty, thoroughly wring a cloth soaked in water, wipe off the dirt, and then wipe with a dry cloth. Do not clean the product with solvents such as benzene, thinner, or strong alkaline detergent because they may affect the surface of the product. Battery The battery is a consumable item. Depending on the usage conditions, it may swell as it reaches the end of its life. When the typical battery life of approximately one year or about 500 charge cycles is exceeded, the battery deteriorates. If the battery begins to swell, or the amount of time it can be used after a full charge becomes dramatically shorter, the battery should be replaced with a new one. Contact your technical support representative. Do not touch the terminals of the battery. Failure to observe this may cause poor contact. When the battery is left installed in the product, it discharges electricity gradually in small amounts even if the product's power is off. If left for a long period (several months or more), the battery will over discharge and its performance may deteriorate. Store the battery in environments with an ambient temperature of -20 C to 35 C (-4 F to 95 F). If the battery is stored in other environments, battery performance and battery life may be reduced. When storing or transporting the battery, make sure that the battery's terminals do not become dirty and that no foreign objects or debris become attached to the battery's terminals. 8 If battery charging is not completed after the specified charging time has passed, remove the battery from the product. The battery protection device may be damaged. You cannot charge an installed battery if it is not recognized by the product. Make sure that you use the specified battery. Terms and illustrations in this document Terms and illustrations in this document Panasonic Corporation and/or its affiliates are referred to collectively as we or Panasonic. This product supports microSD, microSDHC, and microSDXC memory cards. In this document, the term SD card is used as a generic term for any supported memory card. This product supports Nano SIM cards (certain models only). In this document, the term SIM card is used as a generic term for any supported SIM card. Some illustrations in this document may look different from the actual product. Also, the details of the descriptions may vary due to differences between the software versions or automatic updates of some software. Information in this document is subject to change without notice. For the latest information about optional products, refer to the product catalogs, etc. Introduction 9 Disclaimers Disclaimers Panasonic shall not be liable for loss of data or other incidental or consequential damages resulting from the use of this product. This product can download, store, forward, and receive additional content, such as applications, ringtones, contact information, and media files. The use of such content may be restricted or prohibited by the rights of third parties, including but not limited to restriction under applicable copyright laws. You are entirely responsible for additional content that you download to or forward from this product; Panasonic is not responsible for such content or its use. Before using such content, it is your responsibility to verify that your intended use is properly licensed or is otherwise authorized. Panasonic does not warrant or guarantee the accuracy, integrity or quality of any additional content or any other third-party content. Under no circumstances will Panasonic be liable in any way for the improper use of additional content or other third-party content by this product or its operator. This document and any related product documentation may refer to services and applications that are provided by third parties. The use of such services or programs may require separate registration with the third party provider and may be subject to additional terms of use. For applications accessed on or through a third-party web site, please review the web sites terms of use and applicable privacy policy in advance. Panasonic does not warrant or guarantee the availability or performance of any third-
party web sites, services, or applications. 10 Getting Started Confirming the included items Confirming the included items If any items are missing, please contact your technical support representative. Main unit 1 Battery (Model number FZ-VZSUN110U or FZ-VZSUN120U) 1 In general, FZ-VZSUN110U is used in the illustrations, but FZ-
VZSUN120U is used in some illustrations. Operating Instructions - Read Me First 1 Getting Started 11 Description of parts Description of parts Front view Orange, lit: Battery is charging Green, lit: Battery charging is complete Red, lit: Battery level is less than 15 % of a full charge A Indicator B Front camera C Earpiece 12 D Ambient light sensor, proximity sensor The ambient light sensor automatically adjusts the screen brightness. The proximity sensor prevents accidental operations on the touch panel during phone calls. E NFC antenna (internal) When using an NFC card or other NFC device, touch the card/
device to this area of the unit. F Display (touch panel) Can also be operated while using gloves (glove touch mode). G Speaker H Application button [A1] (page 29) I Application button [A2] (page 29) J Application button [A3] (page 29) K Headset jack cover (page 15) L Headset jack M Power button (page 27) N Microphone O Interface cover (page 16) P micro USB port Q Strap attachment hole R Side button (page 29) S Camera button (page 29) T Cradle rail Used when connecting the unit to an optional cradle, etc. Getting Started 13 Rear view A Microphone B Rear camera C Barcode reader D Battery cover E Battery lock lever F Cellular antenna (internal) G GPS antenna (internal) H Flash Can be used when taking pictures. I Strap attachment hole J Wi-Fi, Bluetooth antenna (internal) K Side button (page 29) L Volume buttons 14 M Cradle rail Used when connecting the unit to an optional cradle, etc. N Expansion bus connector Used when connecting an optional cradle, etc. or for other future expansion options. Opening and closing the headset jack cover Pull back at the protrusion of the headset jack cover with your fingertip. When closing, make sure the cover is closed firmly. IMPORTANT Observe the following to ensure the waterproof and dustproof performance of the unit. Make sure the headset jack cover is securely closed when the headset jack is not being used. When closing the headset jack cover, make sure there is no debris lodged in and around the cover. Getting Started 15 Opening and closing the interface cover Opening and closing the interface cover Opening the interface cover 1. Slide in the direction of the arrow at the protrusion
(circled in the illustration above) with your fingertip. Closing the interface cover 2. Pull back the cover and rotate it downward. 1. Rotate the cover upward and insert it to its original position. 2. Firmly slide in the direction of the arrow until the red area (circled in the illustration above) of the cover is no longer visible. 16 IMPORTANT Observe the following to ensure the waterproof and dustproof performance of the unit. Make sure the interface cover is securely closed and locked when the micro USB port is not being used. When closing the interface cover, make sure there is no debris lodged in the gasket that seals the cover. Removing and attaching the battery cover Removing and attaching the battery cover For FZ-VZSUN110U and FZ-VZSUN120U Removing the battery cover 1. Slide the battery lock lever (circled in the illustration) in the direction of
. Getting Started 17 2. Slide the battery cover by firmly placing your hands as shown in the illustration. When removing the battery cover, be careful so that you do not drop the battery. Top Attaching the battery cover 1. Place the battery cover on the unit as shown in the illustration. If the battery is protruding out of the unit, gently push the battery in using the battery cover. 18 2. Slide the battery cover by firmly placing your hands as shown in the illustration until you hear a click. Top 3. Lock the cover by sliding the battery lock lever (circled in the illustration) toward Firmly slide until the red area is no longer visible. IMPORTANT Observe the following to ensure the waterproof and dustproof performance of the unit. Always make sure the battery cover is securely closed and locked. Getting Started 19 Installing SIM cards (certain models only) Installing SIM cards (certain models only) You can install up to two SIM cards. 1. Remove the battery cover (page 17). If a battery is installed, remove it (page 24). 2. Slide the Nano SIM card slot in the direction of the arrow (A), and then open it (B). Insert the SIM card into the desired Nano SIM card slot. Install only Nano SIM cards. If only one SIM card is installed, insert it into Nano SIM card slot 1. Hold the SIM card so that the metal terminals are facing you, and insert with the notch facing in the same direction of the circled area in the illustration below. Slot 1 Slot 2 3. 20 4. Close the Nano SIM card slot (A), and slide it in the direction of the arrow (B) until you hear a click. To remove a SIM card, follow the same procedure, and then pull out the SIM card at step 3. Note See the Reference Manual (tap [Online Manual] in the app list) for information on selecting the active SIM card slot and the preferred mobile network mode. Installing an SD card Installing an SD card When installing or removing an SD card, place the unit on a flat surface. 1. Remove the battery cover (page 17). If a battery is installed, remove it (page 24). 2. Slide the microSD card slot in the direction of the arrow (A), and then open it (B). Getting Started 21 3. Insert the microSD card into the microSD card slot (A), and then close the slot (B). Install only microSD cards. Hold the microSD card so that the metal terminals are facing you, and insert with the notch facing in the same direction of the circled area in the illustration below. 4. Slide the microSD card slot in the direction of the arrow until you hear a click. To remove a microSD card, follow the same procedure, and then pull out the microSD card at step 3. 22 Installing and removing the battery Installing and removing the battery Make sure to turn off the unit before replacing the battery. Installing the battery 1. Remove the battery cover (page 17). 2. Insert the tabs at the batterys terminal side (A) into the notches of the unit (B), and then lower the battery into place (C). For FZ-VZSUN110U For FZ-VZSUN120U The battery may protrude out of the unit even if you install the battery correctly. However, this is not a malfunction or defect. Getting Started 23 IMPORTANT Observe the following to ensure the waterproof and dustproof performance of the unit. When installing the battery, make sure there is no debris lodged in the gasket that seals the unit and in the area around the battery. Removing the battery 1. Remove the battery cover (page 17). 2. Lift the battery up using the tab (circled in the illustration) (A), then remove it (B). For FZ-VZSUN110U For FZ-VZSUN120U 24 IMPORTANT Do not remove the battery while the unit is wet. When the unit is wet, remove the water by wiping off the water droplets and thoroughly drying the unit before removing the battery. (See
"Waterproof/dustproof", Page 7.) Replacing the battery (Battery warm swap) Replacing the battery (Battery warm swap) You can replace the battery without turning the unit off. Replace the battery within 30 seconds. If more than 30 seconds has passed, apps that are running are forced to close and you may lose unsaved data. During warm swapping, all wireless functions are turned off
(power button) until the power options dialog temporarily. 1. Press and hold is displayed. 2. Tap [Battery Warm Swap]. 3. Follow the on-screen instructions. It may take some time until the indicator lights in green. 4. Replace the battery. Getting Started 25 Charging the battery Charging the battery You can charge the unit by using the optional Charging Cup and the optional adaptor. For more information, refer to the Operating Instructions of the Charging Cup. Optional accessories Charging Cup: FZ-VCBN11U AC Adaptor: CF-AA6373A 1. Insert the adaptor straight into the rear indentation as shown in the figure, and insert into the DC input jack (A). Plug the power plug into a power outlet. 2. Rotate the adaptor downward (B), and firmly insert the unit until you hear a click (C). The battery is not charged at the time of purchase. Charge the battery before turning on the unit for the first time or after an extended period of storage. Charge the battery in environments with an ambient temperature of 10 C to 35 C (50 F to 95 F). The indicator lights in orange while the battery is charging, and lights in green when charging is complete. 26 The unit prevents overcharging of the battery by charging only when the remaining battery level is less than approximately 95 %
of its full capacity. You can also charge the unit by connecting it to the USB port of a computer or other device using a USB connection cable. Note When removing the USB connection cable, make sure to remove it while holding the plug. Do not pull by the cable. When connecting a USB connection cable, note the shape of the micro USB plug and the micro USB port. Do not attempt to connect the USB connection cable upside down. Remove any dust or water droplets from plugs before connecting them. Do not use excessive force when inserting plugs or insert them at an angle. Confirming the battery level The battery level is displayed in the upper-right corner of the screen, in the status bar. Fully charged Charging Very low You can also confirm the specific amount of battery level remaining. From the home screen, tap
[Settings] [Battery]. Turning the unit on and off Turning the unit on and off Turning the unit on Press and hold briefly vibrates. Turning the unit off 1. Press and hold 2. Select the power off option.
(power button) on the top of the unit until the unit until the power options dialog is displayed. Getting Started 27 Turning the screen on and off 1. Press 2. Swipe up from the bottom of the screen to release the screen
. lock. Swiping the bottom-left
(Android 5.1) to the right launches the [Phone] app (certain models only), and swiping
(Android 6.0) to the right launches the [Voice Search] app. Swiping the bottom-right app. to the left launches the [Camera]
Configuring the unit for the first time The first time you turn the unit on, you will be prompted to configure different settings. Follow the on-screen instructions and configure each item as needed. An Internet connection is required to configure certain items. Home screen, status bar, and notifications Home screen, status bar, and notifications Using the home screen The home screen is the main screen from which you can launch apps, check widgets, etc. You can customize the home screen to suit your needs by adding, moving, and removing items as desired. You can also view a list of all installed apps by tapping While the screen is on, you can display the home screen at any time by tapping Using the status bar The status bar is displayed at the top of the screen when using most apps. It displays icons that let you know the status of the battery, network signal, and other features. See the Reference Manual for a list of commonly used icons and or A2 (default setting). their meanings. 28 Using the notifications panel The notifications panel provides detailed information about incoming email messages, app updates, calendar events, etc. You can open the notifications panel by sliding your finger down slowly from the top of the screen toward the center of the screen. To close the notifications panel, slide your finger up slowly from the bottom of the screen toward the center of the screen. While the notifications panel is open, you can tap a notification and open the corresponding app, or swipe a notification left or right to delete it from the panel. Navigation and function buttons Navigation and function buttons The navigation buttons are available in most screens and help you navigate the unit's screens. They appear at the bottom or side of the touch panel screen, depending on the units orientation. Returns to the previous screen or closes the current dialog box, menu, etc. Displays the home screen. Displays a list of recently used apps. Once the list is displayed, tap an app to launch it, or swipe left or right to remove an app from the list. The unit also features physical buttons that can be used to access various functions quickly. The default button assignments are described below. A1 A2 A3 The same function as The same function as Displays the list of options (if available) for the current screen. No function by default. Press and hold to launch the camera app. When using the camera app, press this button to take a picture, start and stop video recording, etc. Side buttons Camera button
. Some buttons can be customized using the [UserButtonManager]
app; see the Reference Manual for more information. Getting Started 29 Factory data reset Factory data reset CAUTION The following procedure resets all settings and erases any data you have stored in the unit. Back up important data before performing this procedure. 1. From the home screen, tap
[Settings] [Backup &
reset]. 2. Tap [Factory data reset] [RESET TABLET] [ERASE EVERYTHING]. The unit restarts when the factory data reset is complete. All data in the /mnt/sdcard folder will be erased. Data stored in the SD card will not be erased. 30 Troubleshooting If you experience any trouble while using the unit, refer to the information in this section for troubleshooting. See the Reference Manual (tap [Online Manual] in the app list) for additional troubleshooting information. If the problem persists, contact your technical support representative. Starting up The unit does not turn on. To turn the unit on, press and hold
(power button) until the unit briefly vibrates. battery. The battery may be low or completely discharged. Charge the The unit may be too hot or too cold. Leave the unit in an environment of 10 C to 35 C (50 F to 95 F) for about an hour, and then try again. The unit does not wake up from sleep. The battery may have become completely discharged while the unit was in sleep mode. In this case, any data which has not been saved will be lost. Charge the battery. The unit may be too hot or too cold. Leave the unit in an environment of 10 C to 35 C (50 F to 95 F) for about an hour, and then try again. Nothing appears on the screen. The screen may have turned off to save power. Press
(power button). Charge the battery. Install the battery correctly. Replace the battery with a fully-charged one. The screen is too dark. See The screen is too dark. (page 32). Other startup problems Disconnect and remove all peripheral devices. Troubleshooting 31 Shutting down The unit does not turn off. It may take one or two minutes for the unit to turn off. This is not a malfunction. Press and hold
(power button) for at least 10 seconds to force the unit to restart, and then try again. Disconnect and remove all peripheral devices. Screen The screen is too dark. The [Adaptive brightness] setting reduced the brightness according to the ambient brightness. Manually adjust the screen brightness. 1. From the home screen, tap 2. Tap the [Adaptive brightness] switch to turn it off. 3. Tap [Brightness level] and then adjust the slider.
[Settings] [Display]. The [Minimum limit brightness] setting of customized silent mode was turned on. Turn the setting off. 1. From the home screen, tap notification] [Customized silent mode].
[Settings] [Sound &
2. Tap the [Customized silent mode] switch to turn it off, then tap the [Minimum limit brightness] switch to turn it off. 3. Tap the [Customized silent mode] switch to turn it on. There are red, green, or blue dots on the screen, or there is unevenness in screen colors or brightness. The following are not malfunctions. Although advanced high-precision technologies are used in the production of color LCD screens, a very small number of the screen pixels may be dark or remain constantly lit. Due to the natural characteristics of LCD screens, you may notice unevenness in colors and brightness depending on your angle of view. Hues may also vary by unit. 32 Indicator The indicator flashes in orange. The battery cannot be charged temporarily because the ambient temperature is too low or too high. Leave the unit in an environment of 10 C to 35 C (50 F to 95 F) for about an hour. The indicator lights in red. The remaining battery level is approximately less than 15 % of a full charge. Charge the battery. The indicator flashes in red. Battery authentication failed. Use a specified battery. There may be debris lodged in the battery charge terminals. Remove the battery and remove any debris found. Charging may have stopped automatically. Disconnect the charger and then reconnect it. The indicator does not light during charging. Battery charging ends quickly, or the battery cannot be charged at all. The unit is not connected to the charger properly, or the USB connection cable is not connected properly. Confirm the connection. There may be debris lodged in the battery charge terminals. Remove the battery and remove any debris found. Replace the battery with a new one. The screen is dim and the indicator flashes in red or lights in green. The battery cover may be detached. Attach the cover properly. Troubleshooting 33 Other The date and time are incorrect. Confirm the date and time settings. From the home screen, tap
[Settings] [Date & time]. Set the date and time automatically. 1. From the home screen, tap time].
[Settings] [Date &
2. Tap the [Automatic date & time] and [Automatic time zone] (certain models only) switches to turn them on. 3. Make sure the unit is in an area with good wireless reception, turn the unit off, and then turn it on again. The unit will not recognize dates after December 30, 2037. The units operation is slow. Ambient temperature may be too low or too high. Leave the unit in an environment of 10 C to 35 C (50 F to 95 F) for about an hour and then try again. The unit does not respond. Turn the unit off and then on again (page 27). If an app does not work normally, follow the instructions below to force quit or uninstall the problematic app or process. 1. From the home screen, tap 2. Select the desired app or process and then tap [UNINSTALL]
[Settings] [Apps]. or [FORCE STOP]. The screen freezes and no operations can be performed. Press and hold
(power button) for at least 10 seconds to force the unit to restart, and then try again. 34 Appendix Specifications Specifications Typical unit specifications and certain options are described below. Unit configuration may vary. Model No. FZ-N1 CPU Qualcomm SDM660-2 64bit 2.2GHzx4+1.8GHzx4 Octa Core 3 GB*1 32 GB Internal LCD 4.7 in. HD (1280 720 dots), Aspect ratio 16:9 16 777 216 colors Memory Storage Display Appendix 35 Standards supported IEEE 802.11a / IEEE 802.11b / IEEE 802.11g /
IEEE 802.11n / IEEE 802.11ac Transmission method OFDM system, DSSS system Wireless channels used IEEE 802.11a / IEEE 802.11n (5 GHz) / IEEE 802.11ac W52 (36, 38, 40, 42, 44, 46, 48 ch) W53 (52, 54, 56, 58, 60, 62, 64 ch) W56 (100, 102, 104, 106, 108, 110, 112, 116, 118, 120, 122, 124, 126, 128, 132, 134, 136, 140 ch) W58 (149, 151, 153, 155, 157, 159, 161, 165 ch) IEEE 802.11b / IEEE 802.11g / IEEE 802.11n
(2.4 GHz): 1 ch - 11 ch RF frequency band 2.4 GHz Band: 2.412 GHz - 2.462 GHz 5 GHz Band: 5.18 GHz - 5.32 GHz, 5.5 GHz -
5.7 GHz, 5.745 GHz - 5.825 GHz Data transfer rate IEEE 802.11a: up to 54 Mbps IEEE 802.11b: up to 11 Mbps IEEE 802.11g: up to 54 Mbps IEEE 802.11n:
HT20: up to 72.2 Mbps HT40: up to 150 Mbps IEEE 802.11ac:
VHT20: up to 86.7 Mbps VHT40: up to 200 Mbps VHT80: up to 433.3 Mbps Wi-Fi 36 Bluetooth Mobile networking
(certain models only) Sound Security chip Camera GNSS Barcode reader Enhanced data security Version 5.0, Class 1 Transmission method FHSS system Wireless channels used 0 - 78 ch (Low energy: 0 - 39 ch) RF frequency band 2402 MHz - 2480 MHz Supported profile A2DP, AVRCP, HFP, HID, HOGP, HSP, MAP, OPP, PAN (certain models only), PBAP, SPP, GAVDP, GATT LTE with C.A. , HSPA+, UMTS SIM card slot Nano SIM card slot 2 Speaker Twin speakers (100 dBA), phone speaker Microphone 3 microphones, noise suppressor ARM TrustZone (built-in) Front 5 megapixels Video: 1920 1080 pixels, 30 fps Still: 2592 1944 pixels Rear 8 megapixels Video: 1920 1080 pixels, 30 fps Still: 3264 2448 pixels GPS/GLONASS (2 to 4 m) 1D, 2D support FIPS 140-2 level-1 compliant Appendix 37 Sensors NFC Card slots Interfaces Touchscreen Power supply AC adaptor
(optional) Battery
(FZ-VZSUN110U) Ambient light sensor, Digital compass, Gyro sensor, Acceleration sensor, Proximity sensor Built-in (Type A, B, FeliCa) microSD card slot 1*2
(microSDXC compatible) USB 2.0 port 1*3, Headset jack 1, Expansion bus connector (lower part of the unit) 10-finger touch (capacitive) with:
Glove touch mode*4 Rain sensing touch mode*5 Stylus pen mode (Active type, Passive type) Battery CF-AA6373A*6 Input 100 V to 240 V AC, 50 Hz/60 Hz Output 16 V DC, 3.75 A Lithium-ion 3200 mAh (typ.) / 3100 mAh (min.) Rated Voltage 3.8 V Operating time (approx.)*7 Standby: 700 hours(TBD)*8 Talk: 24 hours(TBD)*8 Barcode scanning*9: 12 hours(TBD) Charging time (approx.)*10 2 hours(TBD) 38 Extended life battery
(FZ-VZSUN120U) Power consumption*11 Dimensions*13
(W D H) Weight*14 Operating environment*15 Lithium-ion 6400 mAh (typ.) / 6200 mAh (min.) Rated Voltage 3.8 V Operating time (approx.)*7 Standby: 1400 hours(TBD)*8 Talk: 48 hours(TBD)*8 Barcode scanning*9: 24 hours(TBD) Charging time (approx.)*10 4 hours(TBD) Approx. 15 W(TBD)*12 Battery (FZ-VZSUN110U) Approx. 74 mm 156 mm 16.3 mm / 31 mm
(barcode reader section)
[2.9 in. 6.1 in. 0.6 in. / 1.2 in (barcode reader section)]
without protrusions Extended Life Battery (FZ-VZSUN120U) Approx. 74 mm 156 mm 26 mm / 31 mm
(barcode reader section)
[2.9 in. 6.1 in. 1.0 in. / 1.2 in (barcode reader section)]
without protrusions Approx. 277 g (0.61 lb)(TBD), with the Battery (FZ-VZSUN110U) Approx. 368 g (0.81 lb)(TBD), with the Extended Life Battery (FZ-VZSUN120U) Temperature
-20 C to 50 C (-4 F to 122 F) Humidity 30 % to 80 % RH Appendix 39 Storage environment Operating system*16 Water and dust resistance Temperature
-30 C to 70 C (-22 F to 158 F) Humidity 30 % to 90 % RH Android 8.1 IP66, IP68 Specifications are subject to change without notice.
*1 1 MB = 1 048 576 bytes, 1 GB = 1 073 741 824 bytes
*2 Operation has been tested and confirmed using the following Panasonic brand memory cards: SD (up to 2 GB), SDHC (up to 32 GB). Compatibility with other SD devices is not guaranteed.
*3 Does not guarantee operation of all USB-compatible
*4 This mode may not operate properly depending on the type of peripherals. glove.
*5 Only single-finger operation is enabled.
*6 The AC adaptor is designed for use with power sources that supply up to 240 V AC. The AC cord supplied with the AC adaptor is designed for use with power sources that supply up to 125 V AC.
*7 Actual performance varies depending on usage conditions, connected peripherals, etc. Typically, operating time is reduced in colder environments.
*8 Results measured with a stable signal, a new battery, and at a stationary position. Results will vary depending on the signal quality, operating environment, and system settings.
*9 As defined by the JEITA Specification, Working Mode B. (Two times reading in every 10 seconds)
*10 Varies depending on usage conditions.
*11 When the battery is fully charged (or not being charged) and the unit is off.
*12 Rated power consumption 40
*13 Actual size may vary by unit configuration.
*14 Average weight. Actual weight may vary by unit configuration.
*15 Do not expose the skin to this product when using the product in a hot or cold environment. When using the product in hot or cold environments, some peripherals may not perform properly. Confirm the recommended operation environment of the peripherals. Using the product continuously in hot environments will shorten the product life. Avoid continuous use in these types of environments. When using the product in cold environments, the product may take longer to start up and battery operation time may be reduced. Even when using the product within the temperature and humidity ranges listed here, using the product continuously in extreme environments will result in product deterioration and will shorten the life of the product.
*16 Product functionality cannot be guaranteed if the operating system is modified or replaced by the user or a third party. The operating system version varies depending on the unit. To confirm the Android version, from the home screen tap
[Settings] [About tablet]. Appendix 41 LIMITED WARRANTY LIMITED WARRANTY Limited warranty for U.S.A. Panasonic System Solutions Company of North America (PSSNA) Computer Products - Worldwide Warranties Section 1: Limited Warranty - Hardware PSSNA, referred hereafter as Panasonic will repair the products listed below with Panasonic approved parts, free of charge in the Global Panasonic approved location for the period specified below from the date of original purchase in the event of a defect in materials or workmanship. These warranties are extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required before warranty performance is rendered. Laptop Computers (CF-##):
Tablet PC (FZ-##/JT-B#):
Ultra-Mobile PC (CF-U#/CF-H# Series):
PDRC - LCD & Keyboard Assembly:
3 Years 3 Years 3 Years 3 Years Original Battery Warranty Batteries supplied with the product are covered under the warranty for one (1) year from date of purchase, except as excluded in Section 3. Batteries purchased separately are covered under the warranty for one (1) year from the date of purchase. A replacement battery furnished under the product warranty is covered for the remaining period of the one year warranty of the original or purchased battery. Optional: Extended Warranty Program (PC) If this coverage is purchased, the serial numbered unit is entitled to the same warranty coverage as the original warranty, for a period determined at the time of the extended warranty purchase. In this case the battery is not included in the extended warranty coverage; a separate coverage program is available for the battery. The cost of labor, parts, and shipping are included in the price of the Extended Warranty Program. 42 Optional: Panasonic Protection Plus Warranty Any unit for which the Panasonic Protection Plus warranty has been purchased will receive additional coverage for any failure that occurs due to accidental damage. All other terms and conditions of the standard warranty apply and this additional coverage will exist for the duration of the standard warranty period of the unit. If an extended Protection Plus warranty program is purchased, coverage is extended to the end of the last year of extended coverage purchased. This warranty does not cover failures or defects that are caused by fire, intentional acts, loss, theft, improper maintenance, modification or service by anyone other than the Panasonic National Service Center or a Panasonic Authorized Service Provider, or damage that is attributable to acts of God. Cosmetic damage that does not affect functionality is not covered. Cosmetic damage on units with hardware failures will be repaired in accordance with the warranty terms. This warranty is extended solely to the original purchaser on the unit serial number for which it was purchased. Complete unit replacement fulfills the full obligation and is at the discretion of Panasonic and is limited to once during the coverage term. Refer to the Panasonic web site for full terms and conditions on the above programs. Options and Accessories Warranties The below listed Panasonic brand or supplied options and accessories are covered under this limited warranty for the period specified from the date of purchase or as specifically stated. AC Adaptor and Power Cord: 3 Years Car Adaptor and Power Cord: 3 Years Cradle: 3 Years Charging Cup: 3 Years Optional Battery: 1 Year Battery Charger: 1 Year Integrated Panasonic supplied options and kits including, but not limited to, Cameras, GPS devices, Bluetooth devices, Smartcard Readers, Magnetic Card Readers, Barcode Scanners, and Fingerprint Readers: 3 years or the warranty period of the unit in which it is installed provided the installation was performed by Panasonic or an Authorized Integrator. Appendix 43 Section 2: Limited Warranty - Software Panasonic warrants to you only that the disk(s) or other media on which the Programs are furnished will be free from defects in material and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof to you, as evidenced by your purchase receipt. This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your requirements or that the operation of the Programs will be uninterrupted or error free. Panasonic shall have no obligation for any defects in the disk(s) or other media on which the Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media. Panasonics entire liability and your exclusive remedy under this warranty shall be limited to the replacement, in the United States or other Panasonic designated location, of any defective disk or other media which is returned to Panasonics Authorized Service Center, together with a copy of the purchase receipt, within the aforesaid warranty period. Section 3: Limited Warranty Exclusions - Specifically excluded from the warranty are:
All consumable items; such as screen protection films, logo badges, labels, cleaning cloths, carry cases, manuals, cables, straps, belts, holsters, tethers, and harnesses and any other options and accessories not listed above or covered under a separate warranty Failures related to the product operating system, hard drive or solid state drive image, software setup, software program, virus, other program(s) or file(s) on any drive or in any computer memory location Failures due to BIOS settings or changes, as well as any cosmetic or physical damage to the unit Any unit or device with a missing or altered model number or serial number label Cosmetic damage or any damage which occurs in shipment Failures which are caused by products not supplied by Panasonic Failures which result from alteration, accident, misuse, introduction of liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance or modification, use not in accordance with product use instructions 44 Failures due to service by anyone other than a Panasonic Authorized Service Provider Failures caused by improper installation of options or accessories or due to installation by any company other than Panasonic or a Panasonic Authorized Integrator Damage, failure, or loss due to the unit being stolen, lost, misplaced, or used by anyone other than the original purchaser Damage that is attributable to acts of God This limited warranty only covers failures due to defects in materials or workmanship which occur during normal use. If a unit is sent to a Panasonic Authorized Service Center and no hardware failure is found, the customer will be billed for labor to correct a software issue or reimage the hard drive plus shipping and applicable administrative fees at the current rates set by the service provider. THIS PRODUCT IS NOT INTENDED FOR USE AS OR PART OF NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*1. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.
*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include class 2 Electronic Flight Bag
(EFB) Systems and Class 1 EFB Systems when used during critical phases of flight
(e.g., during take-off and landing) and/or mounted onto the aircraft. Class 1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No. 36. Other Limits and Exclusions: There are no other express warranties except as listed above. PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or Appendix 45 limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. For technical support or to arrange for service on your Panasonic computer product, call our toll-free hotline at 1-855-PSC-TECH (1-855-772-8324). Web site: www.panasonic.com/toughbook For hearing or speech impaired TTY users, call 1-877-833-8855 using a TTY device. 46 LIMITED WARRANTY / GARANTIE LIMITE LIMITED WARRANTY / GARANTIE LIMITE For Canada PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY Coverage Panasonic Canada Inc. (PCI) warrants to you, the first end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms set forth below, during the period of warranty coverage specified. Scope of Coverage Period of Coverage Type of Failure Coverage Defective Materials or Workmanship Three (3) Years from Date of Original End User Customer Purchase Laptop Computers (except Battery) and AC Adaptor Factory/PCI installed options including Wireless WAN, GPS, Bluetooth, Finger print reader, Backlit keyboard, Memory Card, Optical Drives, Cameras, Smart card Readers, Magnetic Card Readers and Barcode Scanners Ultra-Mobile PC Tablet PC PDRC LCD and Keyboard Assemblies Port Replicator Cradle Charging Cup Battery Battery charger AC Adaptor and Power Cord Car Adaptor and Power Cord External USB Drives Standard or Digitizer Stylus Pen One (1) Year from Date of Original End User Customer Purchase Defective Materials or Workmanship Ninety (90) Days from Date of Original End User Customer Purchase Defective Materials or Workmanship Appendix 47 Scope of Coverage All consumable items including protection film, cleaning cloth, carry case, tether and harness Period of Coverage Type of Failure Coverage No Coverage Remedy In the event of a warranty claim, contact PCIs representatives within the applicable warranty period, identifying the nature of the defect claimed, at 1-800-668-
8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. Fri. (excluding holidays) for instructions on how to obtain service. A purchase receipt or other proof of date of original purchase is required before warranty service is performed. Defective parts covered by this Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair is subject to the terms of this Limited Warranty for the balance of the original period of warranty coverage. No Coverage This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defects in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, introduction of liquid or other foreign matter into the product, alteration or servicing by anyone not authorized by PCI, or act of God. THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*1. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.
*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36 IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICE Carefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original purchase. No liability is assumed for loss or damage to the product while in transit, if you chose your own transportation carrier. 48 SOFTWARE MEDIA LIMITED WARRANTY Coverage PCI warrants to you, the first end user customer, that the disk(s) or other media on which software program(s) is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receipt as evidenced by your purchase receipt for your Panasonic Computer product. THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software. Please refer to the software licensors written warranty (accompanying the copy of the software) for any software warranty claim. Claim Procedure In the event of a defect in material or workmanship in the media during the sixty (60) day warranty period, and you return it, transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, 5770 Ambler Drive, Mississauga, Ontario L4W 2T3, within the warranty period, together with a copy of your purchase receipt, and an explanation of the suspected defect, PCI will replace in Canada the defective disk(s) or other media. Remedy PCIs entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only. It does not cover any other damages, including, but not limited to, loss of use or profit loss, or special, indirect or consequential damages, or other claims, whether or not of similar character. No Coverage This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmental conditions other than those specified by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modification or attempted modification of the program, or if damaged by accident or act of God. PCI is not responsible for damage to or loss of any program, data or removable storage media. GENERAL NO OTHER WARRANTIES PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE, SOFTWARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES. NO LIABILITY FOR CONSEQUENTIAL DAMAGES IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THE COMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL. Appendix 49 IN ANY EVENT, PCIS MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THE COMPUTER PRODUCT. NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION AROSE. Statutory Warranties Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you. Pour le Canada GARANTIE LIMITE ORDINATEURS ET PRIPHRIQUES PANASONIC Couverture Panasonic Canada Inc. ( PCI ) garantit lacheteur original que ce produit informatique ( lexclusion des supports des logiciels) est, au moment de sa vente par PCI ou dun revendeur agr par PCI, exempt de dfauts de pices et de fabrication dans les conditions normales dutilisation, et ce, pendant la priode de couverture de la garantie, sous rserve des modalits dcrites ci-dessous. lments couverts Dure de couverture Trois (3) ans partir de la date dachat original. Type de couverture Dfauts de pices et de fabrication Ordinateurs blocs-notes (sauf batteries) et adaptateur secteur Options installes en usine/par PCI incluant : WAN sans fil, GPS, Bluetooth, lecteur dempreintes digitales, clavier rtroclair, carte mmoire, lecteurs optiques, camras, lecteurs de carte puce, lecteurs de carte magntique et scanners de code-barres Ordinateurs personnels ultra-portables Ordinateurs tablettes Ensembles PDRC ACL et clavier Duplicateur de port Station daccueil Coque de charge 50 lments couverts Batterie Chargeur de batterie Adaptateur secteur et cordon Adaptateur automobile et cordon dalimentation dalimentation Priphriques USB Stylo pointeur standard ou pour numriseur graphique Tous les articles consommables incluant les pellicules protectrices, chiffons de nettoyage, tuis de transport, longes et sangles Dure de couverture Un (1) an partir de la date dachat original. Type de couverture Dfauts de pices et de fabrication Quatre-vingt-dix (90) jours partir de la date dachat original. Aucune couverture Dfauts de pices et de fabrication Recours Pour obtenir des informations sur la marche suivre dans le cas o une rclamation en vertu de la garantie deviendrait ncessaire, communiquez par tlphone avec un reprsentant de PCI au 1-800-668-8386, entre 9h00 et 17h00 (heure de lEst) du lundi au vendredi (sauf les jours fris), avant lchance de la garantie applicable, en prenant soin didentifier la nature de la dfaillance. Un reu ou toute autre pice justificative de la date dachat original sera exig avant toute rparation. Toute pice dfectueuse couverte par la prsente garantie limite sera rpare ou remplace par une pice neuve ou remise neuf. Le remplacement ou la rparation sera fait conformment aux modalits de la prsente garantie limite pendant la dure restante de la priode originale de la garantie. Produits non couverts La prsente garantie limite ne couvre pas les produits achets lextrieur du Canada. Elle ne couvre pas non plus les dommages, la dfaillance ou les dfauts attribuables une manutention inadquate, une mauvaise installation, une utilisation anormale ou abusive, de la ngligence, un accident, un dversement ou la pntration dun objet tranger, une modification, un cas fortuit ou une rparation effectue par une personne non agre par PCI. Appendix 51 CE PRODUIT NEST PAS DESTIN TRE UTILIS, EN TOUT OU EN PARTIE, COMME SYSTME/QUIPEMENT NUCLAIRE, SYSTME/QUIPEMENT DE CONTRLE DU TRAFFIC ARIEN OU SYSTME/QUIPEMENT DE POSTE DE PILOTAGE DAVION*1. PANASONIC DCLINE TOUTE RESPONSABILIT CONCERNANT LUTILISATION DE CE PRODUIT DANS LES CAS SUSMENTIONNS.
*1 Les SYSTMES/QUIPEMENTS DE POSTE DE PILOTAGE DAVION sont dots de systmes OEPP (organiseur lectronique de poste de pilotage) de classe 2 et de classe 1 utiliss pendant des phases critiques de vol (par exemple, pendant le dcollage et latterrissage) et(ou) monts sur lavion. Les systmes OEPP de classe 1 et de classe 2 sont dfinis par le circulaire dinformation FAA :
AC (Advisory Circular) 120-76A ou le feuillet JAA : JAA TGL (Temporary Guidance Leaflets) No 36. EXPDITION DU PRODUIT POUR SERVICE SOUS GARANTIE Emballez soigneusement le produit, de prfrence dans son emballage dorigine. Joignez une description de la dfaillance de mme quune pice justificative de la date dachat. Panasonic Canada Inc. ne peut tre tenue responsable pour tout dommage ou perte subi pendant le transport si vous avez choisi le transporteur. GARANTIE LIMITE SUPPORTS DES LOGICIELS Couverture Panasonic Canada Inc. ( PCI ) garantit lacheteur original que le ou les disques ou tout autre support sur lequel le ou les programmes sont fournis sont exempts de dfauts de pices et de fabrication dans des conditions normales dutilisation au Canada, et ce, pour une priode de soixante (60) jours suivant la date de rception indique sur la preuve dachat. LA PRSENTE GARANTIE EST LA SEULE OFFERTE PAR PCI COUVRANT LES SUPPORTS DE LOGICIELS. PCI ne garantit pas les logiciels. Reportez-vous la garantie crite du concdant de licence dutilisation du logiciel (qui accompagne la copie du logiciel) pour toute rclamation en vertu de la garantie. Rclamation marche suivre Panasonic Canada Inc. remplacera tout disque ou support dfectueux si larticle en question est retourn, port pay, son service de Marketing produits informatiques, 5770 Ambler Drive, Mississauga (Ontario) L4W 2T3, dans les soixante (60) jours suivant la date dachat original. Joignez votre envoi une pice justificative de votre achat et une description du problme. 52 Recours La responsabilit de PCI - et votre seul recours - dans le cas de toute dfaillance couverte par la garantie sur ce support de logiciel est limite au seul remplacement du support. Elle ne couvre aucun autre dommage, y compris, mais non exclusivement, la perte dusage ou de profits, ni aucun dommage spcial, indirect ou conscutif, ni aucune autre rclamation de nature similaire ou autre. Produits non couverts La prsente garantie limite ne sapplique pas si le ou les disques ou autre support ont t utiliss dans un produit dune marque autre que Panasonic ou dans des conditions environnementales autres que celles spcifies par PCI ou le fabricant, ou soumis une mauvaise utilisation, la ngligence, une manutention inadquate ou encore si le programme a t modifi ou subi une tentative de modification ou des dommages attribuables un accident ou un cas fortuit. De plus, PCI nassume aucune responsabilit pour toute perte de, ou tout dommage , un programme, des donnes ou un support de sauvegarde amovible. GNRALITS PCI NE RECONNAT AUCUNE AUTRE GARANTIE, EXPLICITE OU IMPLICITE, Y COMPRIS, MAIS NON EXCLUSIVEMENT, LES GARANTIES IMPLICITES DE VALEUR COMMERCIALE ET DUTILIT UNE FIN QUELCONQUE, LGARD DU LOGICIEL, SUPPORTS DE LOGICIELS, PRODUITS INFORMATIQUES, PRIPHRIQUES ET ACCESSOIRES. SOUS AUCUNE CIRCONSTANCE PCI NE POURRA TRE TENUE RESPONSABLE DES DOMMAGES SPCIAUX, INDIRECTS OU CONSCUTIFS ATTRIBUABLES UN MANQUEMENT AUX GARANTIES LIMITES DCRITES DANS LE PRSENT DOCUMENT OU LUTILISATION DU PRODUIT INFORMATIQUE, Y COMPRIS, SANS RESTRICTION, LA PERTE DE DONNES, DAFFAIRES, DACHALANDAGE OU DE PROFIT. DANS TOUS LES CAS, LA RESPONSABILIT MAXIMALE DE PCI POUR TOUT MANQUEMENT NE POURRA EXCDER LE PRIX DE VENTE DU PRODUIT INFORMATIQUE. AUCUNE RCLAMATION, SANS GARD SES MOTIFS, NE POURRA TRE FAITE AUPRS DE PCI PLUS DE DEUX (2) ANS APRS LES FAITS INVOQUS LA BASE DUNE TELLE RCLAMATION. Garantie statutaires Certaines juridictions interdisent de telles limitations ou exclusions ; aussi, pourraient-elles ne pas sappliquer. Appendix 53 Two Riverfront Plaza, Newark, NJ 07102, USA Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Panasonic Mobile Communications Co., Ltd. 2018 DHQP1024ZA/J1 C0618-0
1 2 3 4 5 6 | Users Manual Part 2 | Users Manual | 2.05 MiB |
Operating Instructions Smart Handheld EB-3901 Operating Instructions Read Me First Tablet Computer Model No. FZ-N1 series Model No. FZ-N1 series Safety Precautions ..................................................................2 Regulatory Information ......................................................... 10 Trademark and License Information....................................... 28 Accessories ........................................................................... 31 Refer to the Reference Manual by downloading from the URL below URL:- https://pc-dl.panasonic.co.jp/itn/manual/menu_en.html Thank you for purchasing a Panasonic product. Before operating this product, please read these instructions and precautions, and save them for future use. Safety Precautions To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbol word panels Explanation of symbol word panels The following symbol word panels are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed. DANGER WARNING CAUTION Denotes potential hazards that will result in serious injury or death. Denotes potential hazards that could result in serious injury or death. Denotes potential hazards that could result in minor injury. The following symbols are used to classify and describe the type of instructions to be observed. This symbol is used to alert users to specific operating procedures that must not be performed. This symbol is used to alert users to specific operating procedures that must be followed in order to operate the product safely. This symbol is used to alert users to specific operating procedures for which special attention is required. 2 Battery DANGER The battery is for use solely with this product. Do not use it with any other products. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Charge the battery using the specified method. Failure to do so may result in electrolyte leakage, overheating, smoke, rupture, or a fire. Do not throw the battery into a fire or expose it to excessive heat. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Do not disassemble, modify, or insert sharp foreign objects into the battery. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Do not short the positive (+) and negative () contacts. Do not carry the battery around or store it together with necklaces, hairpins, etc. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Keep the battery away from extreme heat, such as fire and direct sunlight. Failure to do so may result in electrolyte leakage, overheating, smoke, rupture, or a fire. Do not expose the battery to water or other liquids. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Safety Precautions 3 Do not throw the battery or subject it to strong impact such as dropping or applying high pressure. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Stop using the product if the battery is subjected to strong impact or if the battery is noticeably damaged or deformed. If the battery deteriorates, replace it with a new one. Failure to do so may result in electrolyte leakage, overheating, smoke, rupture, or a fire. WARNING Do not directly touch electrolyte that has leaked from the battery. Electrolyte may enter the eyes and cause blindness, or may come into contact with skin or clothing and cause rashes. Flush with clean water without rubbing and seek medical advice. Do not place the battery in microwave ovens or pressurized containers. Sudden application of heat or pressure may damage the battery, resulting in electrolyte leakage, overheating, smoke, rupture, or a fire. If the battery smells or leaks electrolyte, keep the battery away from fire. Failure to do so may result in electrolyte leakage, overheating, smoke, rupture, or a fire. 4 This product and charger WARNING When using the product for extended periods, do not expose your skin to the product for a prolonged period. Generated heat can cause low-temperature burns. Do not disassemble, repair, or modify the product. This may cause the battery to short circuit or overheat, which may result in a fire or electric shock. Do not insert foreign objects into the product. This may cause the battery to short circuit or overheat, which may result in a fire or electric shock. Do not allow conductive materials such as metal objects to touch the expansion bus connector. This may cause a short circuit and overheating, which may result in battery electrolyte leakage, overheating, smoke, rupture, or a fire. Do not place the product in microwave ovens or electromagnetic cookers. Doing so may cause overheating, smoke, or rupture, which may result in a fire. Do not touch the product or charger during lightning storms if the product is connected to a charger. There is a remote chance of electric shock. Safety Precautions 5 Do not turn the volume up too loud when using headphones, etc. Listening at high volumes for extended periods may result in loss of hearing. Also, turn down the volume before connecting headphones, etc. to prevent sudden loud sounds. Keep SD cards and SIM cards out of the reach of infants and small children. Small objects are suffocation and choking hazards. In the event of accidental swallowing, seek medical help immediately. Do not operate the product while walking, driving, riding a bicycle, etc. Being distracted while engaging in these kinds of activities can cause accidents or falls. Do not use headphones, etc. while driving or in potentially dangerous areas or situations. Your inability to hear the sounds around you can cause accidents. Take special care at rail crossings, station platforms, roads, construction sites, etc. Use only specified batteries. Use of unspecified batteries may result in electrolyte leakage, overheating, smoke, rupture, or a fire. 6 Immediately stop using the product if any of the following occurs. Product is damaged Water or foreign objects enter the product Product emits smoke Product emits unusual smell or sound Product becomes unusually hot Continuing use may result in a fire or electric shock. Immediately turn the product off, disconnect it from the power supply, remove the battery, and then contact your technical support representative. Close the headset jack cover and interface cover when using the product near water or other liquids, and in areas with a high concentration of moisture, steam, dust, oily vapors, etc. Foreign material that enters the product may cause fire or electric shock. If foreign material enters the product, turn the product off, disconnect it from the power supply, and then remove the battery. Contact your technical support representative for support or repair. Stop using the product immediately and consult your doctor if you feel any discomfort when staring at flashing lights on the screen. A very small percentage of individuals may experience seizures or blackouts when exposed to certain light patterns or flashing lights for extended periods. Do not look directly at the laser beam or point the barcode reader at another person's eyes. This may damage the eyes. Do not use the product near automatic control equipment such as automatic doors, fire alarms, etc. RF signals generated by the product may interfere with the proper operation of such equipment. Safety Precautions 7 CAUTION Do not leave the product in areas with a high concentration of moisture, steam, dust, oily vapors, etc. for extended periods. Foreign material that enters the product may cause a fire or electric shock. Do not move the product while the charger is connected. This may result in a fire or electric shock. Make sure not to charge the product when it is wet. This may result in a fire or electric shock. Do not leave the product in extremely high temperature environments for an extended period. Leaving the product where it will be exposed to extremely high temperatures, such as near fire or in direct sunlight, may deform the product or cause damage or malfunction to its internal components. Using the product in these conditions may cause short circuit, insulation defects, etc., which may in turn cause a fire or electric shock. Do not expose the skin to the product when using the product in hot or cold environments. Burns, low-temperature burns, or frostbite may result. If direct contact with the skin is necessary, perform the operation as quickly as possible. Do not place the product on an unstable surface. The product may drop, resulting in an injury. Do not stack the product. If balance is lost, the product may fall over or drop, resulting in an injury. 8 Do not look directly at the light emitter, or point the flash or barcode reader at another person's eyes. This may damage the eyes or cause temporary loss of eyesight which could result in an accident. Keep away from magnetic sources such as watches and magnetic cards. Failure to do so may cause data corruption or device malfunction. For safety purposes, pull the plug when cleaning the product or if you will not use it for extended periods. Failure to do so may result in a fire or electric shock. If a part such as the display is damaged, be careful of broken glass or internal components that may become exposed. Failure to do so can cause injury. Take a 1015 minute break every hour when using the product. Using the product continuously for extended periods may cause strain injuries and may have detrimental health effects on your eyes, hands, or other parts of your body. Safety Precautions 9 Regulatory Information This product and your health / Ce produit et votre sant This product and your health / Ce produit et votre sant This product, like other radio devices, emits radio frequency electromagnetic energy. Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:
Using this product on board of airplanes, or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product. Ce produit met, comme dautres appareils radio, de lnergie lectromagntique radiofrquence. Ce produit fonctionne selon les directives des normes et recommandations de scurit en matire de radiofrquences, nous pensons donc quil peut tre utilis en toute scurit par les consommateurs. Ces normes et recommandations sont le reflet du consensus de la communaut scientifique et rsultent de dlibrations de panels et de commissions de scientifiques qui consultent et interprtent en permanence les nombreux documents de recherche. Dans 10 certaines situations ou dans certains environnements, lutilisation du produit peut tre limite par le propritaire des lieux ou par les reprsentants responsables de lentreprise. Ces situations peuvent inclure :
lutilisation du produit en avion ou dans tout autre environnement o le risque dinterfrences au niveau dautres appareils ou services est peru ou identifi comme tant dangereux. Si vous ntes pas sr de la politique qui sapplique lutilisation dappareils sans fil dans une entreprise ou un environnement spcifique (aroports, par exemple), nous vous prions de bien vouloir demander lautorisation avant dallumer le produit. Information to the user / Avis aux utilisateurs Information to the user / Avis aux utilisateurs We are not responsible for any radio or television interference caused by unauthorized modification of this product. The correction of interference caused by such unauthorized modification will be the responsibility of the user. We and our authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. Nous ne pouvons tre tenus responsables des interfrences au niveau de la radio ou de la tlvision causes par des modifications non autorises du produit. La correction des interfrences causes par de telles modifications non autorises relve de la responsabilit de lutilisateur. Nous et nos revendeurs et distributeurs agrs ne pouvons tre tenus responsables pour les dommages ou les violations de rglementations gouvernementales qui peuvent survenir dans le cadre du non-respect des prsentes directives. Regulatory Information 11 Additional safety precautions Additional safety precautions Posted facilities Turn off the product when in hospitals, health care facilities, or any facility where posted notices require you to do so. Hospitals and health care facilities may be using equipment that could be sensitive to external RF energy. Pacemakers Medical device manufacturers recommend a minimum separation of 15 cm between a wireless device and an implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid potential interference with the medical device. Persons with pacemakers:
Should ALWAYS keep this product more than 15 cm from their pacemaker when this product is turned ON;
Should use the ear opposite the pacemaker to minimize the potential for interference;
Should not carry this product in a breast pocket;
Should turn off the product immediately if there is any reason to suspect that interference is taking place. Hearing aids Some digital wireless products may interfere with some hearing aids. In the event of such interference, consult the manufacturer of your hearing aid to discuss alternatives. Other medical devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. 12 Aircraft Turn off the product after boarding an aircraft, when instructed by flight staff. Obey instructions from flight staff regarding the use of the product in flight. Using this product in an aircraft may be hazardous to the aircrafts operation and disrupt wireless communication, and may also be illegal. Potentially explosive atmosphere Turn off the product in areas where a potentially explosive atmosphere exists and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in injury or even death. Areas with potentially explosive atmosphere may include fueling areas, chemical plants, below deck on boats, fuel or chemical transfer or storage facilities, vehicles using petroleum or natural gas, or areas where the atmosphere contains particles such as grain, dust, or metallic powders, and any other area where you would normally be advised to turn off your vehicle engine. Electronic devices This product receives and transmits radio frequency signals while switched on. Most electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from this product. Therefore, the use must be restricted in certain situations to avoid interference. Driving Give full attention to driving. Driving safely is your first responsibility. Pull off the road and park before placing or answering a call. It is unsafe to operate the product while driving. Check the laws and regulations in the areas where you drive, and always obey them. Regulatory Information 13 Only qualified personnel should install the product in a vehicle. Check regularly that the product is securely mounted in your vehicle and operating properly. Do not place or install the product in the area over the air bag or in the air bag deployment area. If the air bag inflates, serious injury and/or damage could result. RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Consult the manufacturer (or its representative) of the vehicle and any equipment that has been added to the vehicle regarding the use of mobile products. Use hands-free operation, if available and legally permitted. Emergency communications Never rely solely on a mobile product for essential or emergency communications. Network connections can be affected by remaining battery level, radio signals, service networks, and other conditions, and as a result, emergency communications cannot be guaranteed in all conditions. Antenna Do not replace the antenna. Unauthorized antennas, modifications, or attachments could damage the product and may violate regulations. Do not touch or cover the antenna area while the product is on. Call quality, power levels, and the overall performance of the product may be affected. Volume Do not turn the volume up too loud when using headphones and earphones. Exposure to excessive sound pressure levels for extended periods may cause hearing damage. Being unable to hear sounds in your environment may lead to accidents. 14 Intended use Intended use This product is not intended for use as, or as part of, nuclear equipment/systems, air traffic control equipment/systems, aircraft cockpit equipment/systems*1, medical devices or accessories*2, life-support systems or other equipment/devices/systems that are involved with ensuring human life or safety. Panasonic will not be responsible for any liability resulting from the use of this product arising out of the foregoing uses.
*1 Aircraft cockpit equipment/systems include Class 2 Electrical Flight Bag (EFB) Systems and Class 1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class 1 EFB Systems and 2 EFB Systems are defined by FAA: AC
(Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36.
*2 As defined by the European Medical Device Directive (MDD) 93/42/EEC. Panasonic cannot guarantee any specifications, technologies, reliability, safety (e.g., Flammability/Smoke/Toxicity/Radio Frequency Emission, etc.) requirements related to aviation standards and medical equipment standards that differ from the specifications of our COTS (Commercial-Off-The-Shelf) products. This product is not intended for use in medical equipment including life-support systems, air traffic control systems, or other equipment, devices or systems that are involved with ensuring human life or safety. Panasonic cannot be held responsible in any way for any damages or loss resulting from the use of this unit in these types of equipment, devices or systems, etc. This product has been designed so as to minimize shock to the LCD, the leakage of liquid
(e.g., water) on to the buttons, etc., but no warranty is provided against such trouble. Therefore, as a precision instrument, be extremely careful in the handling of the product. Regulatory Information 15 For USA For USA FCC Part 15 information This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. Increase the separation between the product and receiver. Connect the product to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC caution To assure continued FCC emission limit compliance, use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. 16 FCC RF exposure information This product meets the governments requirements for exposure to radio waves. This product is a radio transmitter and receiver. This product is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this product can be found under Reference Manual of https://pc-dl.panasonic.co.jp/itn/manual/menu_en.html For body-worn operation, this product has been tested and meets FCC RF exposure guidelines when used with a Panasonic accessory designated for this product and when used with an accessory that contains no metal and that positions the mobile device a minimum of 1.0 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The FCC has granted an Equipment Authorization for this product with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this product is on file with the FCC and can be found by searching for the products FCC ID number at http://www.fcc.gov/oet/ea/fccid. To find the FCC ID number for your product, first remove the battery pack. The FCC ID number is printed on the nameplate underneath. Regulatory Information 17 Wi-Fi use High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product. Do not use in the vicinity of these high power radar systems. Using hearing aids with mobile devices When some wireless mobile devices are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and mobile devices also vary in the amount of interference they generate. In the event of interference you may want to consult your hearing aid supplier to discuss solutions. The wireless telephone industry has developed ratings for some of their mobile devices, to assist hearing device users in finding mobile devices that may be compatible with their hearing devices. Not all mobile devices have been rated. Mobile devices that are rated have the rating on their box or label located on the box. The ratings are not guarantees. Results will vary depending on the users hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated mobile device successfully. Trying out the mobile device with your hearing device is the best way to evaluate it for your personal needs. M-Ratings: Mobile devices rated M3 or M4 are likely to generate less interference to hearing devices than mobile devices that are not labeled. M4 is the better/higher of the two ratings. T-Ratings: Mobile devices rated T3 or T4 are likely to be more usable with a hearing devices telecoil (T-Coil Switch or Telephone Switch) than unrated mobile devices. T4 is the better/higher of the two ratings.
(Note that the hearing aid telecoil must be activated in order for it to function, and that not all hearing devices have telecoils in them.) Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device. The 18 more immune your hearing aid is, the less likely you are to experience interference noise from mobile devices. The HAC rating and measurement procedure are described in the American National Standards Institute (ANSI) C63.19 standard. Hearing aid compatibility This mobile device has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this mobile device that have not been tested yet for use with hearing aids. It is important to try the different features of this mobile device thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this mobile device for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or mobile retailer. Responsible party Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102, USA Support contact:
http://business.panasonic.com/support-computerstablets Disposal USA Only: Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website:
http://www.panasonic.com/environmental or call 1-888-769-0149. TTY information For hearing or speech impaired TTY users, call 1-877-833-8855 using a TTY device. Regulatory Information 19 For Canada / Pour le Canada For Canada / Pour le Canada Innovation, Science and Economic Development Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Innovation, Sciences et Dveloppement conomique Canada Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et
(2) lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Wi-Fi use This product (local network devices) for the band 5150- 5250 MHz is only indoor usage to reduce potential for harmful interference to cochannel Mobile Satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN (licence-
exempt local area network) devices. Utilisation Wi-Fi Ce produit (appareils pour rseaux locaux) pour les bandes de frquences 5 150-5 250 MHz est rserv une utilisation lintrieur afin de rduire le risque dinterfrence avec les systmes satellites mobiles utilisant les mmes canaux. Les radars forte puissance sont dsigns comme tant les premiers utilisateurs (cest--dire quils ont la priorit) des bandes de 20 frquences 5 250-5 350 MHz et 5 650-5 850 MHz. Ces radars peuvent provoquer des interfrences et/ou des dommages aux dispositifs LAN-EL (rseaux locaux exempts de licence). RF exposure information This product complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. This product is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency
(RF) energy set by Industry Canada. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by Industry Canada is 1.6 W/kg. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by Industry Canada for each model. The highest SAR value for this product can be found under Reference Manual of https://pc-dl.panasonic.co.jp/itn/manual/menu_en.html For body-worn operation, this product has been tested and meets the RF exposure guidelines when used with a Panasonic accessory designated for this product and when used with an accessory that contains no metal and that positions the mobile device a minimum of 1.0 cm from the body. Use of other accessories may not ensure compliance with the RF exposure guidelines. Information sur lexposition aux radiofrquences (RF) Ce produit est conforme aux limites dexposition dIndustrie Canada tablies pour un environnement non contrl. Ce produit est un metteur-rcepteur radio. Il a t conu et fabriqu de Regulatory Information 21 faon ne pas dpasser les limites dmission tablies par Industrie Canada pour lexposition lnergie des radiofrquences (RF). Ces directives sont fondes sur des normes labores par des organisations scientifiques indpendantes au moyen dune valuation priodique et rigoureuse dtudes scientifiques. Ces normes comprennent une marge de scurit substantielle conue pour assurer la scurit de toutes les personnes, quel que soit leur ge ou leur tat de sant. La norme dexposition pour les combins sans fil utilise une unit de mesure appele dbit dabsorption spcifique ou DAS. La limite DAS fixe par Industrie Canada est de 1,6 W/kg. Les essais portant sur le DAS sont effectus en utilisant les positions et les emplacements dutilisation (par ex. au niveau de loreille et port au niveau du corps) spcifis par Industrie Canada pour chaque modle. Les valeurs de DAS les plus leves obtenues pour ce produit se trouvent dans le Manuel de rfrence ladresse https://pc-dl.panasonic.co.jp/itn/manual/menu_en.html Pour lutilisation lorsque lappareil est port sur soi, ce produit a t test et dclar conforme aux directives dexposition aux radiofrquences (RF) dans le cas dune utilisation avec un accessoire Panasonic conu pour ce produit et dans le cas dune utilisation avec un accessoire ne contenant pas de mtal et qui maintient lappareil mobile une distance dau moins 1,0 cm du corps. En cas dutilisation avec dautres accessoires, il est possible que la conformit aux directives dexposition aux radiofrquences (RF) ne soit pas assure. 22 General information / Informations gnrales General information / Informations gnrales CAUTION / ATTENTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Il y a risque dexplosion si la batterie est remplace par une batterie de type incorrect. Mettre au rebut les batteries usages conformment aux instructions. Recycle information / Informations de recyclage A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Lappareil que vous vous tes procur est aliment par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY. Explanation of graphical symbols on nameplate /
Explications relatives aux symboles graphiques prsents sur la plaque signaltique
: Alternating current / courant alternatif
: Direct current / courant continu
: Class II equipment / quipement de classe II Regulatory Information 23 Laser device caution / Mise en garde concernant les appareils laser Laser device caution / Mise en garde concernant les appareils laser CAUTION!
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. This product is using lasers that comply with DHHS RULE 21 CFR CHAPTER I, SUBCHAPTER J and IEC 60825-1:2007 regulations. This product utilizes a Class 2 laser. Class 2 laser readers use a low power, visible diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. Caution: Procedures other than those specified herein may result in hazardous radiation exposure. 24 ATTENTION !
CE PRODUIT UTILISE UN LASER. LUTILISATION DE COMMANDES OU DE RGLAGES OU LEXCUTION DE PROCDURES AUTRES QUE CEUX INDIQUS ICI PEUT ENTRANER LEXPOSITION DES RADIATIONS DANGEREUSES. NOUVREZ PAS LES CACHES ET NE PROCDEZ PAS AUX RPARATIONS VOUS-MME. CONFIEZ LENTRETIEN DU PERSONNEL QUALIFI. Ce produit utilise des lasers conformes aux rglementations CEI 60825-1:2007. Ce produit utilise un laser de classe 2. Les lecteurs laser de classe 2 utilisent une diode visible de faible puissance. Comme avec toute source de lumire trs vive, telle que le soleil, lutilisateur doit viter de regarder directement le faisceau lumineux. Lexposition momentane un laser de classe 2 nest pas connue comme tant dangereuse. Attention : les procdures autres que celles indiques ici peuvent entraner lexposition des radiations dangereuses. Regulatory Information 25 Labeling and device location / tiquetage et emplacement de lappareil
(The product illustration is shown with the Battery Pack (FZ-
VZSUN110U) installed. / Le produit est reprsent avec le bloc de batteries (FZ-VZSUN110U) install.) Barcode reader /
Lecteur de codes barres When the Battery Pack (FZ-VZSUN110U) is installed:
Lorsque le bloc de batteries (FZ-VZSUN110U) est install :
When the Extended Life Battery Pack (FZ-VZSUN120) is installed:
Lorsque le bloc de batteries dure de vie prolonge
(FZ-VZSUN120) est install :
26 Laser radiation information Wavelength: 630-680 nm Pulse duration: approx. 10 msec Repetition rate: approx. 1000/18 Hz Maximum power: 1 mW max Aiming pattern angle: 48.0 horizontal, 38.0 vertical Informations sur les rayonnements laser Longueur donde : 630-680 nm Dure dimpulsion : environ 10 ms Frquence de rptition : environ 1000/18 Hz Puissance max. : 1 mW max Angle de vise : 48,0 horizontal, 38,0 vertical Regulatory Information 27 Trademark and License Information Trademarks The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. microSDXC Logo is a trademark of SD-3C, LLC. The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Android is a trademark of Google, Inc. Wi-Fi, the Wi-Fi logo, the Wi-Fi CERTIFIED logo and Wi-Fi CERTIFIED are trademarks or registered trademarks of Wi-Fi Alliance. All other trademarks identified herein are the property of their respective owners. License information This product is licensed under the MPEG-4 Visual patent portfolio license for the personal and non-commercial use of a consumer for
(i) encoding video in compliance with the MPEG-4 Visual Standard
(MPEG-4 Video) and/or
(ii) decoding MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed by MPEG LA to provide MPEG-4 Video. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses and licensing may be obtained from MPEG LA, L.L.C. See http://www.mpegla.com. 28 This product is licensed under the AVC patent portfolio license for the personal use of a consumer or other uses in which it does not receive remuneration to
(i) encode video in compliance with the AVC Standard (AVC Video) and/or
(ii) decode AVC Video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, L.L.C. See http://www.mpegla.com. This product contains software licensed in compliance with GNU General Public License Version 2.0 (GPL v2.0), GNU Lesser General Public License (LGPL) or any other license. The program is free software; you can copy it, redistribute it, and modify it under the terms of the GPL v2.0, LGPL or any other license. At least three (3) years from delivery of products, Panasonic Mobile Communications Co., Ltd. will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL v2.0 and LGPL or any other license. Contact Information oss-cd-request@gg.jp.panasonic.com Source code is also freely available to the public via the web site listed below. https://panasonic.net/cns/oss/index.html Please note that we cannot respond to any inquiries regarding the source code. For more details on the relevant software (including license information of GPL v2.0 and LGPL), refer to the information displayed on the following screen: swipe up the home screen, Trademark and License Information 29 and then in the app list, tap [Settings] [System] [About tablet] [Legal information]. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.
(http://www.openssl.org/source/license.html) This product includes the Independent JPEG Group's software. This software is based in part on the work of the Independent JPEG Group. This product includes the software distributed under the terms of The FreeType Project License. This software is based in part of the work of the FreeType Team. This product includes the following software; ICU 1.8.1 and later Copyright (c) 1995-2011 International Business Machines Corporation and others. This product includes other free software or open source software. For more details on the relevant software (including license information), refer to the information displayed on the following screen: swipe up the home screen, and then in the app list, tap
[Settings] [System] [About tablet] [Legal information]. TouchSense Technology licensed from Immersion Corporation. TouchSense and other Immersion software contained herein are protected under one or more of the U.S. Patents found at the following address www.immersion.com/patent-marking.html and other patents pending. 30 Accessories For the latest information about optional products, refer to the product catalogs, etc. Product name AC Adaptor Battery Pack Cradle Charging Cup Holster Hand Strap Active Pen Protective Film
(10 sheets) 4-Bay Cradle 4-Bay Battery Charger 5-Bay Cradle 5-Bay Battery Charger 5-Bay Charge only Cradle Model number CF-AA6373A FZ-VZSUN110U FZ-VZSUN120U*1 FZ-VZSUN120W FZ-VEBN111 FZ-VCBN11U FZ-VSTN12U FZ-VSTN11AU FZ-VNPN11U FZ-VPF series FZ-VEBN121 FZ-VCBN121 FZ-VEBN141 FZ-VCBN131 FZ-VCBN141
*1 Certain models only. Accessories 31 Two Riverfront Plaza, Newark, NJ 07102, USA Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Panasonic Mobile Communications Co., Ltd. 2018
*DHQX1491ZA/J1*
DHQX1491ZA/J1 C0618-0 Printed in Japan
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-06-21 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | JBP - Part 15 Class B Computing Device Peripheral | |||
3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
4 | 1850 ~ 1910 | PCE - PCS Licensed Transmitter held to ear | ||
5 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | ||
6 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 5 6 | Effective |
2018-06-21
|
||||
1 2 3 4 5 6 | Applicant's complete, legal business name |
Panasonic Corporation of North America
|
||||
1 2 3 4 5 6 | FCC Registration Number (FRN) |
0003762242
|
||||
1 2 3 4 5 6 | Physical Address |
Two Riverfront Plaza, 9th Floor
|
||||
1 2 3 4 5 6 |
Newark, New Jersey 07102-5490
|
|||||
1 2 3 4 5 6 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 4 5 6 | TCB Application Email Address |
t******@pctest.com
|
||||
1 2 3 4 5 6 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 4 5 6 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
1 2 3 4 5 6 |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
app s | FCC ID | |||||
1 2 3 4 5 6 | Grantee Code |
ACJ
|
||||
1 2 3 4 5 6 | Equipment Product Code |
FZN1D
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 5 6 | Name |
B**** B********
|
||||
1 2 3 4 5 6 | Title |
Project Manager
|
||||
1 2 3 4 5 6 | Telephone Number |
201-3********
|
||||
1 2 3 4 5 6 | Fax Number |
201-3********
|
||||
1 2 3 4 5 6 |
B******@us.panasonic.com
|
|||||
app s | Technical Contact | |||||
1 2 3 4 5 6 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 2 3 4 5 6 | Name |
R**** O****
|
||||
1 2 3 4 5 6 | Physical Address |
6660-B Dobbin Road
|
||||
1 2 3 4 5 6 |
Columbia, Maryland 21045
|
|||||
1 2 3 4 5 6 |
United States
|
|||||
1 2 3 4 5 6 | Telephone Number |
410-2********
|
||||
1 2 3 4 5 6 | Fax Number |
410-2********
|
||||
1 2 3 4 5 6 |
t******@pctest.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 5 6 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 5 6 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 5 6 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/18/2018 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 5 6 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 5 6 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 3 4 5 6 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 4 5 6 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 5 6 | PCE - PCS Licensed Transmitter held to ear | |||||
1 2 3 4 5 6 | DXX - Part 15 Low Power Communication Device Transmitter | |||||
1 2 3 4 5 6 | DTS - Digital Transmission System | |||||
1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Multi-band UMTS/LTE Phone with Bluetooth, WLAN and RFID | ||||
1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
1 2 3 4 5 6 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 5 6 | Purpose / Application is for | Original Equipment | ||||
1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 5 6 | Grant Comments | Output power is conducted. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. This device supports 20, 40, and 80 MHz BW modes. The highest reported SAR for head, body-worn accessory, simultaneous transmission, product specific (phablet), and extremity (hand) exposure conditions is 0.14 W/kg, 0.32 W/kg, 1.54 W/kg, 3.59 W/kg, and 0.69 W/kg, respectively. HAC Rating: M4 T4 - 2011 | ||||
1 2 3 4 5 6 | Output power is conducted. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission, and extremity (hand) exposure conditions is < 0.10 W/kg, < 0.10 W/kg, < 0.10 W/kg,1.54 W/kg, and 0.69 W/kg, respectively. | |||||
1 2 3 4 5 6 | Output power listed is ERP for frequencies below 1 GHz and EIRP for frequencies above 1 GHz. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to the specific belt-clips / holsters / accessories tested for this filing, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. This device supports bandwidths of 1.4/3/5/10 MHz for LTE Band 12 and 5, bandwidths of 5/10 MHz for LTE Band 14 and 13, and bandwidths of 1.4/3/5/10/15/20 MHz for LTE Bands 2, 4 and 66. The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission, product specific (phablet), and extremity (hand) exposure conditions is 0.54 W/kg, 1.20 W/kg, 1.41 W/kg, 1.54 W/kg, 3.59 W/kg, and 0.69 W/kg, respectively. HAC Rating: M4 T4 - 2011 This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. | |||||
1 2 3 4 5 6 | Output power is conducted. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. This device supports 20 and 40 MHz BW modes. The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission, and extremity (hand) exposure conditions is 0.25 W/kg, 0.16 W/kg, 0.25 W/kg,1.54 W/kg, and 0.69 W/kg, respectively. HAC Rating: M4 T4 - 2011 | |||||
1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 5 6 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 2 3 4 5 6 | Name |
R******** O******
|
||||
1 2 3 4 5 6 | Telephone Number |
410-2********
|
||||
1 2 3 4 5 6 | Fax Number |
410 2********
|
||||
1 2 3 4 5 6 |
r******@pctestlab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC HC | 5180 | 5240 | 0.07 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC HC | 5260 | 5320 | 0.069 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | CC HC | 5500 | 5700 | 0.07 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15E | CC HC | 5745 | 5825 | 0.07 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | 16 CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0070000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 22H | HC | 824 | 849 | 0.102 | 2.5 ppm | 4M16F9W | |||||||||||||||||||||||||||||||||
4 | 2 | 24E | HC | 1850 | 1910 | 0.46 | 2.5 ppm | 4M16F9W | |||||||||||||||||||||||||||||||||
4 | 3 | 27 | HC | 699 | 716 | 0.091 | 2.5 ppm | 9M02G7D | |||||||||||||||||||||||||||||||||
4 | 4 | 27 | HC | 699 | 716 | 0.076 | 2.5 ppm | 9M05W7D | |||||||||||||||||||||||||||||||||
4 | 5 | 27 | HC | 777 | 787 | 0.066 | 2.5 ppm | 8M99G7D | |||||||||||||||||||||||||||||||||
4 | 6 | 27 | HC | 777 | 787 | 0.049 | 2.5 ppm | 9M01W7D | |||||||||||||||||||||||||||||||||
4 | 7 | 9 | HC PF | 788 | 798 | 0.062 | 2.5 ppm | 9M03W7D | |||||||||||||||||||||||||||||||||
4 | 8 | 9 | HC PF | 788 | 798 | 0.047 | 2.5 ppm | 9M00W7D | |||||||||||||||||||||||||||||||||
4 | 9 | 22H | HC | 824 | 849 | 0.105 | 2.5 ppm | 9M01G7D | |||||||||||||||||||||||||||||||||
4 | 1 | 22H | HC | 824 | 849 | 0.089 | 2.5 ppm | 8M99W7D | |||||||||||||||||||||||||||||||||
4 | 11 | 27 | HC | 1710 | 1780 | 0.342 | 2.5 ppm | 18M0G7D | |||||||||||||||||||||||||||||||||
4 | 12 | 27 | HC | 1710 | 1780 | 0.289 | 2.5 ppm | 18M0W7D | |||||||||||||||||||||||||||||||||
4 | 13 | 24E | HC | 1850 | 1910 | 0.305 | 2.5 ppm | 18M0G7D | |||||||||||||||||||||||||||||||||
4 | 14 | 24E | HC | 1850 | 1910 | 0.248 | 2.5 ppm | 18M0W7D | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15C | CC | 13.56000000 | 13.56000000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15C | CC HC | 2412 | 2462 | 0.072 | |||||||||||||||||||||||||||||||||||
6 | 2 | 15C | CC | 2402 | 2480 | 0.0007 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC