FCC ID: ACJ9TGCF-521 Panasonic Toughbook with EvDO, WLAN and Bluetooth

 

OPERATING INSTRUCTIONS Personal Computer Model No. CF-52 series Contents Getting Started Introduction.................................................2 Read Me First..............................................3 Description of Parts .......................................9 First-time Operation .....................................11 d e t r a t S g n i t t e G Useful Information On-screen Manual.......................................14 Handling and Maintenance.............................15 Hard Disk Backup Function (Recover Pro)...........17 Hard Disk Data Erase Utility ...........................19 Reinstalling Software....................................20 Troubleshooting Error Code/Message ....................................22 Troubleshooting (Basic) ................................23 Hardware Diagnostics...................................27 Appendix LIMITED USE LICENSE AGREEMENT..............30 Specifications ............................................32 LIMITED WARRANTY ..................................35 For further information about the com-

puter, you can refer to the on-screen manual. To access the on-screen manual

page 14 On-screen Manual Please read these instructions carefully before using this product and save this manual for future use. n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U Introduction Thank you for purchasing this Panasonic computer. For optimum performance and safety, please read these instruc-

tions carefully.

Terms and illustrations in these instructions

Conditions that may result in minor or moderate injury. Useful and helpful information. Press [Enter] key. Press and hold [Fn] key, and then press [F5] key. CAUTION

NOTE Enter :

Fn + F5 :

[start] - [Run] : Click [start], and then click [Run]. You may need to double-click in some cases.

Page in these Operating Instructions or in the Reference Manual. Reference to the on-screen manuals.

Some illustrations are simplified to help your understanding and may look different from the actual unit.

If you do not log on as an administrator, you cannot use some functions or cannot display some screens.

Refer for the latest information about optional products to the catalogs, etc.

In these instructions, the names and terms are referred as follows. Microsoft Windows XP Professional Service Pack 2 with Advanced Security Technologies as Windows or Windows XP WinDVD 5 (OEM Version) as WinDVD Bs Recorder GOLD8 BASIC as Bs Recorder Bs CLiP 6 as Bs CLiP DVD-ROM & CD-R/RW drive and DVD MULTI drive as CD/DVD drive Circular media including DVD-ROM and CD-ROM as discs

The display modes are referred as follows. ( ) indicates the terms in [Intel Graphics Media Accelerator Driver for Mobile] screen. To display the screen, click [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Drive for Mobile]. Internal LCD (Notebook): The computers display External display (Monitor): External display Simultaneous display (Intel Dual Display Clone): The same screen is displayed on the internal LCD and the Extended desktop: The extended working area across the internal LCD and the external display. external display.

Copyright This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd. No patent liability is assumed with respect to the use of the information contained herein. 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.

Disclaimer Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the com-

puter and the manuals.

Trademarks Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other countries. Intel, Core, Centrino and PROSet are either registered trademarks or trademarks of Intel Corporation. SD Logo is a trademark. Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorpo-

rated in the United States and/or other countries. PhoenixBIOS, Phoenix Always and Recover Pro are trademarks and/or registered trademarks of Phoenix Technolo-

gies Ltd. Bluetooth is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Matsushita Electric Industrial Co., Ltd. WinDVD is a trademark of InterVideo, Inc. Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd. Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective own companies. g n i t o o h s e b u o r T l x i d n e p p A 2 Read Me First Models for U.S.A. receiver. Federal Communications Commission Radio Fre-

quency Interference Statement Note: This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment gener-

ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

Consult the Panasonic Service Center or an experi-

enced radio/TV technician for help. Warning To assure continued compliance, use only shielded inter-

face cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. FCC RF Exposure Warning:

This equipment is provided with PC Card slot that could be used with wireless transmitters, which will be specifi-

cally recommended when they become available. Other third-party wireless transmitters have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.

<Only for models with wireless LAN/Bluetooth>

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment has been approved for mobile opera-

tion, and unless otherwise advised in separate supple-

mental instructions for individual wireless transmitter(s), requires minimum 20 cm spacing be provided between antenna(s) and all persons body (excluding extremities of hands, wrist and feet) during wireless modes of oper-

ation.

This equipment may use multiple installed transmitters, which may be capable of simultaneous transmission.

<Only for models with wireless LAN>

This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the fre-

quency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, includ-

ing interference that may cause undesired operation. Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP5 (1-800-527-8675) FCC Regulation Notice for modem This equipment contains a FCC approved modem. 1. This equipment complies with CFR47 Part 68 rules. On the computer is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If required, this information must be provided to the tele-

phone company. 2. An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. See Installation Instruc-

tions for details. 4. 3. The REN is used to determine the quantity of devices which may be connected to the telephone line. Exces-

sive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all area, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as deter-

mined by the total RENs, contact the local telephone company. If your telephone equipment cause harm to the tele-

phone network, the telephone company will notify you in advice that temporary discontinuance of service may be required. But if advice notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. 5. The telephone company may take changes in its facili-

ties, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. If trouble is experienced with this equipment, for repair or warranty information, please contact Panasonic Corporation of North America at DIAL TOLL FREE 1-

800-LAPTOP5 (1-800-527-8675). If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equip-

ment until the problem is resolved. 7. There are no user serviceable parts contained in this 6. equipment. 8. This equipment may not be used on coin service pro-

vided by the telephone company. Connection to party lines is subject to state tariffs. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 3 Read Me First 9. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each trans-

mitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entry, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. In order to program this information into your fax soft-

ware, you should refer to the manual of the Fax soft-

ware being used. 10.According to the FCCs electrical safety advisory, we recommend that you may install an AC surge arrestor in the AC outlet to which this equipment is connected. Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources and that this is a major nationwide problem. Models for Canada Industry Canada (IC) Notice for modem This equipment contains an Industry Canada approved modem unit. The Industry Canada label is affixed on the modem unit. EQUIPMENT ATTACHEMENT LIMITATIONS NOTICE: The Industry Canada label identifies certified equip-

ment. This certification means that the equipment meets tele-

communications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equip-

ment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the users sat-

isfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecom-

munications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a rep-

resentative designated by the supplier. Any repairs or alter-

ations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connec-

tions themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. REN: See bottom of the computer Caution : To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord. ATTENTION : Pour rduire le risque dincendie, utiliser uniquement des conducteurs de tlcommunications 26 AWG ou de section suprieure. 16-M-1 Notice for the products using LCD This product has a fluorescent lamp that contains mer-

cury. Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please contact your local authorities, or the Electronic Industries Alliance:

<http://www.eiae.org/>

24-M-2 For U.S.A.-California Only This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

38-M-1 RESTRICTIONS CONCERNANT LE RACCORDEMENT DE MATRIEL AVIS: Ltiquette dIndustrie Canada identifie le matriel homologu. Cette tiquette certifie que le matriel est con-

forme aux normes de protection, dexploitation et de scurit des rseaux de tlcommunications, comme le prescrivent les documents concernant les exigences techniques relatives au matriel terminal. Le Ministre nassure toutefois pas que le matriel fonctionnera la satisfaction de lutilisateur. Avant dinstaller ce matriel, lutilisateur doit sassurer quil est permis de le raccorder aux installations de lentreprise locale de tlcommunication. Le matriel doit galement tre install en suivant une mthode accepte de raccordement. Labonn ne doit pas oublier quil est possible que la confor-

mit aux conditions nonces ci-dessus nempche pas la dgradation du service dans certaines situations. Les rparations de matriel homologu doivent tre coordon-

nes par un reprsentant dsign par le fournisseur. Lentreprise de tlcommunications peut demander lutili-

sateur de dbrancher un appareil la suite de rparations ou de modifications effectues par lutilisateur ou cause de mau-

vais fonctionnement. Pour sa propre protection, lutilisateur doit sassurer que tous les fils de mise la terre de la source dnergie lectrique, des lignes tlphoniques et des canalisations deau mtalliques, sil y en a, sont raccords ensemble. Cette prcaution est particu-

lirement importante dans les rgions rurales. Avertissement:

Lutilisateur ne doit pas tenter de faire ces raccordements lui-

mme; il doit avoir recours un service dinspection des instal-

lations lectriques, ou un lectricien, selon le cas. AVIS: Lindice dquivalence de la sonnerie (IES) assign chaque dispositif terminal indique le nombre maximal de ter-

minaux qui peuvent tre raccords une interface. La termi-

naison dune interface tlphonique peut consister en une combinaison de quelques dispositifs, la seule condition que la somme dindices dquivalence de la sonnerie de touts les dispositifs nexcde pas 5. IES: Voir sous le fond de lordinateur 17-Ca-1 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 4 Canadian ICES-003 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. 7-M-2

<Only for model with wireless LAN/Bluetooth>

Industry Canada This product complies with RSS210 Industry Canada. Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including inter-

ference that may cause undesired operation of the device. 30-Ca-1-1

<Only for model with wireless LAN>

This product (local network devices) for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users (mean-

ing they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LELAN devices. 30-Ca-2-1 This device has been designed to operate with an antenna having a maximum gain of 2.15 dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The Required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. 25-Ca-1-1

<Only for model with wireless LAN>

RF Exposure Warning This equipment has been approved for mobile operation, and unless otherwise advised in separate supplemental instructions for individual wireless transmitter(s), requires minimum 20cm spacing be proved between antenna(s) and all persons body (excluding extremities of hands, wrist and feet) during wireless modes of operation.

<Pour modles LAN sans fil uniquement>

Mise en garde concernant lexposition lnergie radiofrquence Cet quipement a t homologu pour un fonctionnement sans fil et, sauf avis contraire inclus dans la notice dutili-

sation dun autre metteur sans fil, une distance minimale de 20 cm doit tre assure entre lantenne et le corps de toute personne ( lexclusion des mains, poignets et pieds) pendant le fonctionnement sans fil. 25-M-5-1 Models for Europe

<Only for model with a CE mark on the bottom of the computer>

Declaration of Conformity (DoC) Hereby, we declare that this Personal Computer is in compliance with the essential requirements and other rele-

vant provisions of the Directive 1999/5/

EC. Hint:

If you want to get a copy of the original DoC of our prod-

ucts which relates to the R&TTE, please contact our web address: http://www.doc.panasonic.de Contact and pursuant to at the directive 2004/108/EC, article 9 (2) Panasonic Testing Centre Panasonic Service Europe, a division of Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, F.R. Germany Network connection. The terminal equipment is intended for connection to the following public network;

In all the countries of European Economical Area;

- Public Switched Telephony Networks Technical Features. The terminal equipment includes the following features;

- DTMF dialing

- Maximum bitrate receiving mode: 56 kbit/s

- Maximum bitrate sending mode: 33.6 kbit/s This product is designed to interwork with the Public Switched Tele-

communication Networks in UK, Ireland, Netherlands, Sweden, Denmark, Finland, Switzerland, Luxembourg, Belgium, France, Ger-

many, Spain, Portugal, Iceland, Greece, Italy, Norway and Austria. 18-E-2 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A Important Safety Instructions /

Importantes Mesures De Scurit When using your telephone equipment, basic safety precau-

tions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS 19-E-1 Certaines mesures de scurit doivent tre prises pen-

dant lutilisation de matrial tlphonique afin de rduire les risques dincendie, de choc lectrique et de blessures. En voici quelquesunes:

1. Ne pas utiliser lappareil prs de leau, p.ex., prs dune baignoire, dun lavabo, dun vier de cuisine, dun bac laver, dans un sous-sol humide ou prs dune piscine. 2. viter dutiliser le tlphone (sauf sil sagit dun appareil sans fil) pendant un orage lectrique. Ceci peut prsenter un risque de choc lectrique caus par la foudre. 3. Ne pas utiliser lappareil tlphonique pour signaler une fuite de gaz sil est situ prs de la fuite. 4. Utiliser seulement le cordon dalimentation et le type de piles indiqus dans ce manual. Ne pas jeter les piles dans le feu: elles peuvent exploser. Se conformer aux rglements pertinents quant llimination des piles. CONSERVER CES INSTRUCTIONS 19-F-1 5 Read Me First Information to the User

<Only for model with wireless LAN/Bluetooth>

This product and your Health This product, like other radio devices, emits radio fre-

quency electromagnetic energy. The level of energy emit-

ted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this prod-

uct may be restricted by the proprietor of the building or responsible representatives of the organization. These sit-

uations may for example include:

Lithium Battery / Pile au lithium Lithium Battery!

This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel. Warning! A risk of explosion from incorrect installation or misapplication may possibly occur. 15-E-1

Using this product on board of airplanes, or

In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment

(e.g. airports), you are encouraged to ask for authoriza-

tion to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interfer-

ence caused by unauthorized modification of this product. The correction of interference caused by such unautho-

rized modification will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. 26-M-1 Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui per-

met de sauvegarder certaines donnes, notamment la date et lheure. La pile ne doit tre remplace que par un technicien qualifi. Danger ! Risque dexplosion en cas de non respect de cette mise en garde!

15-F-1 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A CD/DVD Drive Caution CAUTION!

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. 12-E-1 AVERTISSEMENT!

CET APPAREIL UTILISE UN LASER. LUTILISATION DE COMMANDES OU DE RGLAGES OU LEXCUTION DE PROCDURES AUTRES QUE CELLES SPCIFIES ICI PEUVENT PROVOQUER UNE EXPOSITION DES RADIATIONS DANGEREUSES. NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RPARER SOIMME. CONFIER TOUT TRAVAIL DENTRETIEN UN PERSONNEL QUALIFI. 12-F-1 Laser safety information is appropriate only when drive with laser is installed. 12-M-2-1 Les mesures de scurit relatives au laser ne sappliquent que lors de linstallation dune unit avec laser. 12-F-2-1 Bottom 12-1-1 Information on Disposal for Users of Waste Electrical & Electronic Equipment

(private households) Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of dis-

posal. 36-M-1 6 Precautions THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIR-

CRAFT COCKPIT EQUIPMENT/SYSTEMS*1. PANA-

SONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.

*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36. Panasonic cannot guarantee any specifications, tech-

nologies, reliability, safety (e.g. Flammability/Smoke/

Toxicity/Radio Frequency Emission, etc) requirements related to aviation standards that exceed the specifica-

tions of our COTS (Commercial-Off-The-Shelf) products. 39-E-1 This computer is not intended for use in medical equipment including life-support systems, air traffic control systems, or other equipment, devices or systems that are involved with ensuring human life or safety. Panasonic cannot be held responsible in any way for any damages or loss resulting from the use of this unit in these types of equipment, devices or systems, etc. This computer has been designed so as to minimize shock to the LCD and hard disk drive, the leakage of liquid (e.g., water) on to the keyboard, etc., but no warranty is provided against such trou-

ble. Therefore, as a precision instrument, be extremely careful in the handling. If a Malfunction Occurs, Immediately Unplug the AC Plug and the Battery Pack This product is damaged Foreign object inside this product Smoke emitted Unusual smell emitted Unusually hot Continuing to use this product while any of the above con-

ditions are present may result in fire or electric shock. If a malfunction occurs, immediately turn the power off and unplug the AC plug, and then remove the battery pack. Then contact your technical support office. Do Not Touch This Product and Cable When It Starts Thundering Electric shock may result. Do Not Connect the AC Adaptor to a Power Source Other Than a Standard Household AC Outlet Otherwise, a fire due to overheating may result. Connect-

ing to a DC/AC converter (inverter) may damage the AC adaptor. On an airplane, only connect the AC adaptor/

charger to an AC outlet specifically approved for such use. Do Not Do Anything That May Damage the AC Cord, the AC Plug, or the AC Adaptor Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy objects on it, or bundle it tightly. Continuing to use a damaged cord may result in fire, short circuit, or electric shock. Do Not Pull or Insert the AC Plug If Your Hands Are Wet Electric shock may result. Clean Dust and Other Debris of the AC Plug Regularly If dust or other debris accumulates on the plug, humidity, etc. may cause a defect in the insulation, which may result in a fire. Pull the plug, and wipe it with a dry cloth. Pull the plug if the computer is not being used for a long period of time. Insert the AC Plug Completely If the plug is not inserted completely, fire due to overheat-

ing or electric shock may result. Do not use a damaged plug or loose AC outlet. Do Not Place Containers of Liquid or Metal Objects on Top of This Product If water or other liquid spills, or if paper clips, coins, or for-

eign matter get inside this product, fire or electric shock may result. If foreign matter has found its way inside, immediately turn the power off and unplug the AC plug and remove the battery pack. Then contact your technical support office. Do Not Disassemble This Product There are high-voltage areas inside which may give you an electric shock if you should touch them. Do not touch the pins and circuit boards inside, and do not allow foreign matter to enter inside. Also, remodeling or disassembly may cause a fire. Keep SD Memory Cards Away from Infants and Small Chil-

dren Accidental swallowing will result in bodily injury. In the event of accidental swallowing, see a doctor immediately. Do Not Place This Product on Unstable Surfaces If balance is lost, this product may fall over or drop, result-

ing in an injury. Avoid Stacking If balance is lost, this product may fall over or drop, result-

ing in an injury. Do Not Keep This Product Wherever There is a Lot of Water, Moisture, Steam, Dust, Oily Vapors, etc. Otherwise, possibly resulting in fire or electric shock. Do Not Leave This Product in High Temperature Environment Such as in a Sun-Heated Car, for a Long Period of Time Leaving this product where it will be exposed to extremely high temperatures such as in a sun-heated car or in direct sunlight may deform the cabinet and/or cause trouble in the internal parts. Continued use in such a resulting condition may lead to short-circuiting or insulation defects, etc. which may in turn lead to a fire or electric shocks. Do Not Block the Ventilation Hole Otherwise, heat will build up inside, possibly resulting in a fire. Hold the Plug When Unplugging the AC Plug Pulling on the cord may damage the cord, resulting in a fire or electric shock. Do Not Move This Product While the AC Plug Is Connected The AC cord may be damaged, resulting in fire or electric shock. If the AC cord is damaged, unplug the AC plug immediately. Use Only the Specified AC Adaptor With This Product Using an AC adaptor other than the one supplied

(attached to your product or supplied by Panasonic) may result in a fire. Do Not Subject the AC Adaptor to Any Strong Impact Using the AC adaptor after a strong impact such as being dropped may result in electric shock, short circuit, or fire. Take a Break of 10-15 Minutes Every Hour Using this product for long periods of time may have detri-

mental health effects on the eyes or hands. Do Not Look into the CD/DVD Drive Looking directly at the internal laser light source may result in damage to eyesight. Do Not Use Discs That Are Cracked or Deformed Because the discs rotate at high speeds, damaged discs may break apart causing injury. Discs that are not round and discs that have been repaired using adhesives are similarly dangerous, and so should not be used. Do Not Turn the Volume Up to Loud When Using Head-

phones Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hearing. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 7 Read Me First Use the Modem With a Regular Telephone Line Connection to an internal phone line (on-premise switches) of a company or business office, etc. or to a digital public phone or use in a country or area not supported by the computer may result in a fire or electric shocks. Do Not Connect a Telephone Line, or a Network Cable Other Than the One Specified, into the LAN Port If the LAN port is connected to a network such as the ones listed below, a fire or electric shock may result. Networks other than 1000BASE-T, 100BASE-TX or 10BASE-T Phone lines (Telephone lines, internal phone lines (on-premise switches), digital public phones, etc.) Precautions (Battery Pack) Do Not Use With Any Other Product The battery pack is rechargeable and was intended for the specified product. If it is used with a product other than the one for which it was designed, electrolyte leak-

age, generation of heat, ignition or rupture may result. Do Not Charge the Battery Using Methods Other Than Those Specified If the battery is not charged using one of the specified methods, electrolyte leakage, generation of heat, ignition or rupture may result. Do Not Throw the Battery Pack into a Fire or Expose It to Excessive Heat Generation of heat, ignition or rupture may result. Avoid Extreme Heat (Near the Fire, in Direct Sunlight, for Example) Electrolyte leakage, generation of heat, ignition or rupture may result. Do Not Insert Sharp Objects into the Battery Pack, Expose It to Bumps or Shocks, Disassemble, or Mod-

ify It Electrolyte leakage, generation of heat, ignition or rupture may result. Do Not Short the Positive (+) and Negative (-) Con-

tacts Generation of heat, ignition or rupture may result. Do not place the battery pack together with articles such as neck-

laces or hairpins when carrying or storing. Do Not Use This Product With a Battery Pack Other Than the One Specified Use only the specified battery pack (CF-VZSU43AU) with your product. Use of battery packs other than those man-

ufactured and supplied by Panasonic may present a safety hazard (generation of heat, ignition or rupture).

Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged.

Do not expose the battery pack to water, or allow it to become wet.

If the battery pack will not be used for a long period of time (a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 8 Do Not Use With Exposing the Skin to This Product For a Long Period of Time Using this product with exposing the skin to the heat source of this product or AC adaptor for a long period of time can cause a low-temperature burn. receiver.

Do not place the computer near a television or radio

Keep the computer away from magnets. Data stored on the hard disk may be lost.

This computer prevents overcharging of the battery by recharging only when the remaining power is less than approx. 95% of capacity.

The battery pack is not charged when the computer is first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automatically.

Should the battery leak and the fluid get into your eyes, do not rub your eyes. Immediately flush your eyes with clear water and see a doctor for medical treatment as soon as possible. NOTE

The battery pack may become warm during recharging or normal use. This is completely normal.

Recharging will not commence if internal temperature of the battery pack is outside of the allowable tempera-

ture range (0 C to 50 C {32F to 122F}) ( Ref-

erence Manual Battery Power). Once the allowable range requirement is satisfied, charging begins auto-

matically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10 C {50F} or below.)

If the temperature is low, the operating time is short-

ened. Only use the computer within the allowable tem-

perature range.

This computer has a high temperature mode function that prevents the degradation of the battery in high temperature environments. ( Battery Power) A level corresponding to a 100%

charge for high temperature mode is approximately equivalent to an 80% charge level for normal tempera-

ture mode. Reference Manual

The battery pack is a consumable item. If the amount of time the computer can be run by using a particular battery pack becomes dramatically shorter and repeated recharging does not restore its performance, the battery pack should be replaced with a new one.

When transporting a spare battery inside a package, briefcase, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected.

Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity

( Reference Manual LAN). Description of Parts A B I C D E F A : Speaker

Reference Manual Key Combinations B : Multimedia pocket

Reference Manual Multimedia Pocket C : SD Memory Card slot

Reference Manual SD Memory Card D : Battery pack E : Headphone jack You can connect headphones or amplified speakers. When they are connected, audio from the internal speakers is not heard. F : Microphone jack A condenser microphone can be used. If other types of microphones are used, audio input may not be pos-

sible, or malfunctions may occur as a result. When recording in stereo using a stereo microphone:

Click [start] - [All Programs] - [SoundMAX] - [Control Panel] and select [Microphone], and then add a check mark for [No Filtering] in [Microphone Enhancements]. When using a monaural microphone with a 2-terminal plug:

Click [start] - [All Programs] - [SoundMAX] - [Control Panel]

and select [Microphone], and then add a check mark for

[Voice Recording] in [Microphone Enhancements]. Otherwise, only audio on the left track will be recorded. G : Wireless LAN antenna

<Only for model with wireless LAN>

Reference Manual Wireless LAN H : LCD I : LED indicator Caps lock Numeric key (NumLk) Scroll lock (ScrLk) Multimedia pocket device status

Reference Manual Multimedia Pocket G H I J K A L M N I O I P d e t r a t S g n i t t e G Hard disk drive status Power status

(Off: Power off/Hibernation, Green: Power on, Blink-

ing green: Standby, Blinking green rapidly: Cannot power on or resume due to low temperature.) Battery status

Reference Manual Battery Power SD Memory Card status

(Blinking: During access or a password is requested)

Reference Manual SD Memory Card Wireless ready This indicator lights when Wireless LAN, Blue-

tooth, and/or Wireless WAN are connected and ready. It does not necessarily indicate the On/Off condition of the wireless connection.

Reference Manual Wireless LAN Bluetooth Disabling/Enabling Wireless Communication Wireless WAN status

<Only for model with wireless WAN>

Refer to the instruction manual of the wireless device J : Power switch K : Function key

Reference Manual Key Combinations L : Bluetooth antenna

<Only for model with Bluetooth>

Reference Manual Bluetooth M : Keyboard N : Touch pad O :Carrying handle P :Wireless switch

Reference Manual Disabling/Enabling Wire-

less Communication Wireless LAN Bluetooth n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 9 Description of Parts Right side A B C D EX PC E 1394 F G Rear side d e t r a t S g n i t t e G F H I J K L M LOCK Bottom N O P Q R A : Hard disk drive

Reference Manual Hard Disk Drive B : Smart Card slot

<Only for model with Smart Card slot>

Reference Manual Smart Card C : ExpressCard slot

Reference Manual PC Card / ExpressCard D :PC Card slot

Reference Manual PC Card / ExpressCard E : IEEE 1394 interface connector

Reference Manual IEEE 1394 Devices F : USB port

Reference Manual USB Devices G : DC-IN jack H : External display port

Reference Manual External Display I : Security lock A Kensington cable can be connected. For further information, read the manual that comes with the cable. J : Ventilation hole K : Modem port

Reference Manual Modem L : LAN port

Reference Manual LAN M : Serial port N : Expansion bus connector

Reference Manual Port Replicator O : RAM module slot

Reference Manual RAM Module P : Hard disk drive latch

Reference Manual Hard Disk Drive Q : Multimedia pocket release button

Reference Manual Multimedia Pocket R : Battery latch A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Lappareil que vous vous tes procur est aliment par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY. 48-M-1 10 First-time Operation

Preparation A Check and identify the supplied accessories. If you do not find the described accessories, contact Panasonic Technical Support ( page 36). AC Adaptor . 1 AC Cord . 1 Battery Pack . 1 Modem Telephone Cable . 1 Model No: CF-AA1683A Product Recovery DVD-ROM . 1 Operating Instructions (This book) . 1 Windows Book . 1

You will need the serial number when you reinstall Bs Recorder/Bs CLiP using Product Recovery DVD-ROM Model No: CF-VZSU29A

( page 26). B Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computers packaging ( page 30). 1 1 Insert the battery pack. A A Press and hold the B Insert the battery pack (B) until it securely fits the connector. C Slide the cover back. mark part (A), and slide and remove the cover. B

To remove the battery pack In step B above, slide and hold the latch (C), and pull the tab (D) of the battery pack. CAUTION

Make sure the cover is securely attached. Otherwise the battery pack may fall when you carry the computer.

Do not touch the terminals of the battery pack and the computer. Doing so can make the terminals dirty or damaged, and may cause malfunction of the battery pack and the computer. D C 2 2 Connect your computer to a power outlet. The battery charging starts automatically. CAUTION

Do not disconnect the AC adaptor and do not switch the wireless switch to on until the first-time operation procedure is completed.

When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor.

Handling the AC adaptor Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the battery pack alone. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 11 First-time Operation 3 Turn on the computer. A Pull the carrying handle forward. B Lift up the latch (A) and lift open the display. C Confirm the wireless switch (B) is OFF. D Press and hold the power switch power indicator lights. for approximately one second until the CAUTION

Do not press the power switch repeatedly.

The computer will be forcibly turned off if you press and hold the power switch for

Once you turn off the computer, wait for ten seconds or more before you turn on four seconds or longer. the computer again.

Do not perform the following operation until the hard disk drive indicator turns off. Connecting or disconnecting the AC adaptor Pressing the power switch Touching the keyboard, touch pad or external mouse Closing the display Turn on/off the wireless switch

When the CPU temperature is high, the computer may not start up to prevent overheating of the CPU. Wait until the computer cools down, and then turn the power on again. If the computer does not power on even after cooling down, contact Panasonic Technical Support ( page 36). 4 Setup Windows. A Follow the on-screen instructions. CAUTION

When you set date/time/time zone and click [Next], the screen may not go to the next step for a few minutes. Do not touch the keyboard or touch pad, and wait until the screen changes.

If An unexpected error has occurred (or a similar message) is displayed, click [OK]. This is not a malfunction.

Wait until the hard disk drive indicator has turned off. This computer periodically records the management information including the hard disk information such as number of hours powered-on, number of times powered-on, internal temperature, replacement sector. The maximum data vol-

ume for each record is 750 byte. These information are only used for estimating the cause when the hard disk goes down by any possibility. They are never sent to outside via network nor used for any other purpose except for the purpose described the above. To disable the function, add the check mark for [Disable the automatic save function for management information history] in [Hard Disk Status] of PC Infor-

mation Viewer, and click [OK].

( Reference Manual Checking the Computers Usage Status) 5 Create a new account. A Click [start] - [Control Panel] - [User Accounts] - [Create a new account]. CAUTION

Remember your password. If you forget the password, you cannot use the Win-

dows operation system. Creating a password reset disk beforehand is recom-

mended. 3 A B 2 1 4 d e t r a t S g n i t t e G 12 NOTE

Regarding Windows XP

Windows Update You can select the Classic view of Control Panel or the Classic Start menu. You can also change the way a user logs on or off. This manual explains using the Windows XP default setting (not Classic view or Classic Start menu etc.). You can update to the latest patches and service packs for Windows with the following menus. Click [start] - [All Programs] - [Windows Update]. Do not apply Driver Updates even if a message to update a driver appears. If a driver update is required, contact Panasonic Technical Support ( page 36).

If the message Your computer might be at risk is displayed

(red icon) on the notification area and make the appropriate settings. The Windows Security Center regu-

Select larly gives you notice so that you can make the optimum settings. This is not an error message and you can use the computer. However, making appropriate measures is recom-

mended to reduce the risk of virus and other attacks.

Note that the computer consumes electricity even when the computer power is off. If the battery pack is fully charged, the battery will fully discharge in:

Approx. 4 weeks (When Wake Up from LAN function is on. (default setting)) Approx. 8 weeks (When Wake Up from LAN function is off.) d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 13 On-screen Manual You can access the Reference Manual and the Important Tips on the computer screen. When you access the Reference Manual and the Important Tips for the first time, the License Agreement of the Adobe Reader may be displayed. Read it carefully and select [Accept] to proceed.

Reference Manual The Reference Manual contains the practical information to help you fully enjoy the computers performance. To access the Reference Manual:

A Click [start] - [Reference Manual]. Contents

Key Combinations

Standby or Hibernation Functions

Security Measures

Battery Power

Multimedia Pocket

CD/DVD Drive

WinDVD

Bs Recorder/Bs CLiP

PC Card / ExpressCard

SD Memory Card

SD Security d e t r a t S g n i t t e G

Smart Card

RAM Module

Port Replicator

External Display

USB Devices

IEEE 1394 Devices

Modem

LAN

Disabling/Enabling Wireless Com-

munication

Wireless LAN

Bluetooth

Hard Disk Drive

Setup Utility

Icon Enlarger

Loupe Utility

DMI Viewer

Recover Pro

Technical Information

Troubleshooting (Advanced)

Important Tips The Important Tips will provide you with the battery information so that you can use the battery pack in the optimum condition to obtain longer operation time. To access the Important Tips:

A Double-click on the desktop.

Alternatively click [start] - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips]. NOTE

When Adobe Reader update notice is displayed, we recommend you follow the on-screen procedure and update. See http://www.adobe.com/ for the latest version of Adobe Reader. n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 14 Handling and Maintenance Operation Environment exposed to an extremely strong impact, it may become inoperable.

Temperature:

Humidity:

Operation Storage Operation Storage

: 5 C to 35 C {41 F to 95 F}

: -20 C to 60 C {- 4 F to 140 F}

: 30% to 80% RH (No condensation)

: 30% to 90% RH (No condensation)

Place the computer on a flat stable surface. Do not place the computer upright or turn it over. If the computer is Even within the above temperature/humidity ranges, using for a long time in an extreme environment will result in the product deterioration and will shorten the product life.

Do not place the computer in the following areas, otherwise the computer may be damaged. Near electronic equipment. Image distortion or noise may occur. In extremely high or low temperature.

As the computer can become hot during operation, keep it away from items that are sensitive to heat. Handling Cautions This computer is designed to minimize shock to parts such as the LCD and the hard disk drive and equipped with a drip-

proof keyboard, but no warranty is provided against any trouble caused by shock. Be extremely careful when handling the computer.

When carrying the computer:

Turn off the computer. Remove all external devices, cables, PC Cards and other protruding things. Remove a disc in the CD/DVD drive. Do not drop or hit the computer against solid objects. Do not leave the display open. Do not grip the display part.

Do not put anything (e.g., a piece of paper) between the display and keyboard.

When you board an airplane, take the computer with you and never put it in your checked luggage. When using the computer on airplane, follow the airlines instructions.

When carrying a spare battery, put it in a plastic bag to protect its terminals.

The touch pad is designed to be used with a finger tip. Do not place any object on its surface and do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g., nails, pencils and ball point pens).

Avoid any harmful substances such as oil from getting into the touch pad. The cursor may not work correctly.

This computer contains a magnet and magnetic products at the locations circled in the illustration at right. Avoid leaving metallic object or magnetic media in contact with these areas.

When using peripheral devices Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction manuals of the peripheral devices.

Use the peripheral devices conforming to the computers specifications.

Connect to the connectors in the correct direction.

If it is hard to insert, do not try forcibly but check the connectors shape, direction, alignment of pins, etc.

If screws are included, fasten them securely.

Remove the cables when you carry the computer. Do not pull the cables forcibly.

Preventing your computer from unauthorized use via wireless LAN/Bluetooth/Wireless WAN

<Only for model with wireless LAN/Bluetooth/Wireless WAN>

Before using wireless LAN/Bluetooth/Wireless WAN, make the appropriate security settings such as data encryp-

tion. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 15 Handling and Maintenance

Computrace Software Computrace software tracks your stolen computer. Perform the following steps before installing Computrace software.

Computrace software is not included or installed in this computer. CAUTION

You will be unable to set [Computrace (R) BIOS Module] to [Disable] once you have set to [Enable]. Do not change the setting when not used. Even if you have set [Computrace (R) BIOS Module] to [Enable], this setting may return to [Disable] after repairs to the motherboard, etc. have been made. NOTE

Consult Absolute Software Corp. before disposal.

Refer to the following URL for Computrace software for installation and available service regions. Note that this service is only available in certain regions. http://www.absolute.com 1 2 3 4 5 6 Turn on or restart the computer, and press F2 while [Panasonic] boot screen is dis-

played. The Setup Utility starts up.

If the password is requested, enter the Supervisor Password. Select the [Security] menu, then select [Computrace (R) Sub-Menu] and press Enter. Select [Computrace (R) BIOS Module], and set to [Enable]. At the confirmation message, select [Execute] and press Enter. At the reconfirmation message, select [Execute] and press Enter. Press F10. At the confirmation message, select [Yes] and press Enter. The computer restarts. Maintenance To clean the LCD panel Use the soft cloth included with the computer. (For further information, refer to Suggestions About Cleaning the LCD Surface that comes with the soft cloth.) To clean areas other than the LCD panel Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in water-diluted detergent and wring it thoroughly. CAUTION

Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc. Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface.

Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause malfunction or damage. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 16 Hard Disk Backup Function (Recover Pro) The Recover Pro creates a backup area (storage area) on the hard disk to back up (store) the hard disk data, and restores the backup data to its original location when it is lost or corrupted by operational errors or other factors. You do not need external media or peripheral devices to back up or restore hard disk data on this computer. At purchase, the Recover Pro is not installed. Install using the instructions below. The Recover Pro cannot back up or restore data correctly if a hard disk problem occurs during data backup or restor-

ing. If an error occurs due to an unexpected malfunction, incorrect operation, or other reason while data is being restored, the hard disk data (data before restoration) may be lost. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for any damage suffered (including loss of data) as a result of the use of this function. The Recover Pro provides 3 types of backup as follows:

Quick Backup: Scheduled backup of the updated data

File Backup: File backup at file save and change

Complete Backup: Backup of the entire data on the internal hard disk Here, we will explain the procedures for installation, complete backup (backing up hard disk contents in case Windows cannot be booted), and complete restore (recovering the hard disk data to its condition at the time of the complete backup). For further information, refer to the softwares online manual ( page 18). CAUTION

All operations should be executed with the AC adaptor connected. Do not turn the power off while operations are in progress. If the power is turned off while installation, backup, or restore operations are in progress, these operations may not function properly, and it may be impossible to start Windows. Also, do not press any keys or slide any switches, including hot keys.

When restarting the computer, the message Check file system on C: may appear. Follow the on-screen instruc-

tions. Do not skip the check process.

Make sure you allow enough space on the hard disk when choosing settings during installation. To change these settings you must reinstall Recover Pro. To execute Complete Backup reliably, we recommend performing [Typical] installation in the following cases. Hard disk with a single partition Immediately after reinstalling software (when more than half of the entire space of the hard disk is available)

( page 20) hard disk drive.

Be sure to use the internal hard disk drive to create the backup area. Never use disk or device other than the internal

Some software (security software, backup software, encryption software, or hard disc accessible specific software, etc.) may be incompatible with Recover Pro. For further information, refer to:

http://www.phoenix.com/en/Customer+Services/White+Papers-Specs/Recover+Pro/default.htm

When using Personal Secure Drive ( Installation Manual of Trusted Platform Module (TPM)), do not execute File Backup for Personal Secure Drive.

The Create recovery CD-DVD function in Recover Pro is designed to help you save complete backup data to CD or DVD. When using the Create recovery CD-DVD, you can view the complete backup data on the hard disk, but take care to avoid accidentally deleting this data. Installation Preparation 1 2 3 4 5

Connect the AC adaptor. Log on to Windows as an administrator. Close all programs. Disable anti-virus software. Click [start] - [Run], enter [c:\util\rcvpro\setup.exe], and click [OK]. The InstallShield Wizard screen appears. Click [Next]. Follow the on-screen instructions. Carefully read the License Agreement, and click [I accept the agreement.]

The computer restarts several times to complete installation. appears in the notification area. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 17 Hard Disk Backup Function (Recover Pro) CAUTION

During the installation, the screen may become black (no display) momentarily. This is not a malfunction.

If you select [Typical] in installation, approximately 40% (max.) of the hard disk drive space is allocated as the backup area.

You cannot change the size of backup area after creation. Complete Backup Backs up all data on the hard disk. Preparation

Connect the AC adaptor. Log on to Windows as an administrator. Close all programs. Click [start] - [All Programs] - [Phoenix Applications] - [Phoenix Recover Pro 6]. Recover Pro 6 screen appears. Click [Complete Backup], and click [Yes].

The computer restarts, and Recover Pro 6 screen appears. Follow the on-screen instructions. NOTE

You can completely backup only one set of the whole data in the hard disk to the backup area.

Do not touch the power switch while using the Recover Pro. Complete Restore This function uses the data created during complete backup. It restores the hard disk data to the condition when you performed the complete backup. Files created and changes made to settings after the latest complete backup is made will be deleted. Preparation

Connect the AC adaptor. Click [start] - [All Programs] - [Phoenix Applications] - [Phoenix Always Launcher], and click [Run].

The computer restarts, and Phoenix Always screen appears. Alternatively turn on or restart the computer, and hold down F4 while [Panasonic] boot screen is displayed until Phoenix Always screen appears. Click [Protect / Recover], and click [Phoenix Recover Pro 6].

Recover Pro 6 screen appears. Click [Complete Restore]. Follow the on-screen instructions. NOTE

Do not touch the power switch while using the Recover Pro.

To access the online manual A Click [start] - [All Programs] - [Phoenix Applications] - [Docs], and double-click [UserGuides]. B Double-click the file of Recover Pro users guide or Phoenix Always users guide. d e t r a t S g n i t t e G 1 2 3 4 1 2 3 n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 18 Hard Disk Data Erase Utility When disposing the computer or transferring the ownership, erase all hard disk data in order to avoid data leakage. Even if you erase the data or initialize the hard disk using normal Windows commands, the data can be read with some special software. Use the hard disk data erase utility to erase the data completely. Note that transferring of the ownership without uninstalling the commercial software will be a violation of the softwares license agreement. The hard disk data erase utility erases data using an overwriting method, but there is a possibility that due to malfunc-

tions or other operational errors, data may not be completely erased. There are also specialized devices that may be able to read data that has been erased using this method. If you need to erase highly confidential data, we recom-

mend that you contact a company that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses or damages suffered as a result of the use of this utility. CAUTION

When the hard disk contains the Recover Pro backup data, the Recover Pro backup area is lost as well. NOTE

Even if hard disk data erase is performed, the number of times of DVDs region code setting will not be reset.

This utility cannot erase data for specific partitions. Preparation

Prepare the following items:

The Product Recovery DVD-ROM (included) Panasonic CD/DVD drive (included)

Remove all peripherals (except for the CD/DVD drive).

Connect the AC adaptor and do not remove it until hard disk data erase is complete. 1 2 3 4 5 6 7 Reference Manual Multimedia Pocket). Turn off the computer and insert the CD/DVD drive into the multimedia pocket

( Turn on the computer, and press F2 several times while [Panasonic] boot screen is dis-

played. The Setup Utility starts up.

If the password is requested, enter the Supervisor Password. Select the [Boot] menu, then select [IDE MP] and press F6 until [IDE MP] is at the top of the boot priority order. Select the [Security] menu and set [DVD Operation] to [Enable]. Set the Product Recovery DVD-ROM into the CD/DVD drive. Press F10. At the confirmation message, select [Yes] and press Enter. The computer restarts. Press 2 to execute [2. [Erase HDD]].

To cancel this operation, press 0. At the confirmation message, press Y. 8 9 When [<<< Start menu >>>] is displayed, press Enter. The approximate time required for erasing data will be displayed. 10 Press Space. At the confirmation message, press Enter. The hard disk erase process starts. When the operation is completed, the [Hard disk data has been deleted.]

message will appear. If a problem has occurred during the operation, an error message will appear.

To cancel partway, press Ctrl + C. The data erasure will be up to that point. 11 Remove the Product Recovery DVD-ROM, and then press any key to turn off the com-

puter. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 19 Reinstalling Software Reinstalling software will return the computer to the default condition. When you reinstall the software, the hard disk data including the backup data of the Recover Pro will be erased. Back up important data to other media or an external hard disk before reinstallation. Preparation

Prepare the following items:

The Product Recovery DVD-ROM (included) Panasonic CD/DVD drive (included)

Remove all peripherals (except for the CD/DVD drive).

Connect the AC adaptor and do not remove it until reinstallation is complete. NOTE

Even if reinstallation is performed, the number of times of DVDs region code setting will not be reset.

If you have installed the Recover Pro ( page 17), Select [1] or [2] in the step 10 below. If you select [3], the Recover Pro will no longer function properly. Only when you want to save the data which you stored in the separate partitions other than the first partition and the Recover Pro backup area, select [3] in the step 10 below and perform the following steps. A After reinstallation, backup the data to external media (e.g., removable disc). B Perform the reinstallation procedure again, and select [1] or [2] in the step 10. C Return the data backed up in external media to the internal hard disk. 1 2 Reference Manual Multimedia Pocket). Turn off the computer and insert the CD/DVD drive into the multimedia pocket

( Turn on the computer, and press F2 several times while [Panasonic] boot screen is dis-

played. The Setup Utility starts up.

If the password is requested, enter the Supervisor Password. 3 Write down all of the contents of the Setup Utility and press F9. At the confirmation message, select [Yes] and press Enter. Select the [Boot] menu, then select [IDE MP] and press F6 until [IDE MP] is at the top of the boot priority order. Select the [Security] menu and set [DVD Operation] to [Enable]. Set the Product Recovery DVD-ROM into the CD/DVD drive. Press F10. At the confirmation message, select [Yes] and press Enter. The computer will restart. Press 1 to execute [1. [Recovery]]. The License Agreement screen appears.

To cancel partway, press 0. Press 1 to select [1. Yes, I agree to the provisions above and wish to continue!]. 9 10 Select the settings.

[2]: Enter the size of operating system partition and press Enter.

(The size of data partition will be determined by subtracting the operating system partition size from the maximum size.)

[3]: Windows will be installed in the first partition.

(The size of the first partition must be 20 GB or more. If smaller, installation will not be possible.) At the confirmation message, press Y. Reinstallation starts automatically. (It will take approximately 30 - 60 minutes.)

Do not interrupt reinstallation, for example by turning off the computer or pressing Ctrl + Alt + Del. Other-

wise reinstallation may become unavailable as Windows may not start up or the data may be corrupted. 11 Remove the Product Recovery DVD-ROM, and then press any key to turn off the com-

puter. 4 5 6 7 8 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 20 12 Turn on the computer, and press F2 several times while [Panasonic] boot screen is dis-

played. The Setup Utility starts up.

If the password is requested, enter the Supervisor Password. 13 Press F9. At the confirmation message, select [Yes] and then press Enter. The Setup Utility settings excluding the password(s) will return to the default values. 14 Select the [Exit] menu and then select [Save Current Values], then press Enter. 15 At the confirmation message, select [Yes] and press Enter. Turn the computer off by using the power switch.

If additional instructions are included with the computer, be sure to read them. It may be necessary to perform additional operations during the following procedure. 16 Perform the First-time Operation ( page 11). 17 Start the Setup Utility and change the settings as necessary. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 21 Error Code/Message Follow the instructions below when an error message or code appears. If the problem persists or if the error code/mes-

sage is not shown here, contact Panasonic Technical Support ( page 36). Error Code/Message 0211 Keyboard error 0251 System CMOS checksum bad -

Default configuration used 0271 Check date and time settings 0280 Previous boot incomplete - Default configuration used Press <F2> to Setup Operating System not found d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U Solution

Disconnect external keyboard or mouse. An error has occurred in the memory of Setup Utility settings. This occurs when the memory content is changed by an unexpected program operation, etc.

Start the Setup Utility and return the settings to the default values, and then change the settings as necessary.

If the problem persists, the internal clock battery may need to be replaced. Contact Panasonic Technical Support ( page 36). The date and time settings are not correct.

Start the Setup Utility and set the correct date and time.

If the problem persists, the internal clock battery may need to be replaced. Contact Panasonic Technical Support ( page 36). Startup has failed repeatedly, so the Setup Utility settings have been returned to the default values to startup the computer.

Start the Setup Utility and return the settings to the default values, and then change the settings as necessary.

Write down the error details and press F2 to start the Setup Utility. Change the settings if necessary. The operating system is not installed in the floppy disk or the hard disk that you are going to boot from.

If using a floppy disk, change the disk to the one you can use for boot.

If using the hard disk, check if the hard disk is recognized in [Information] menu of the Setup Utility. If the hard disk is recognized, perform the reinstallation ( page 20). If not, contact Panasonic Technical Support ( page 36).

If a device is connected to the USB port, disconnect the device, or set [USB Port] or

[Legacy USB Support] to [Disable] in [Advanced] menu of the Setup Utility.

If a device is connected to the ExpressCard slot, disconnect the device, or set [Express-

Card slot] to [Disable] in the [Advanced] menu of the Setup Utility. RAM Module Failed When the RAM module is not inserted correctly or the RAM module is not conforming to the computers specifications, so a beep will sound and the RAM Module Failed message will be displayed when you turn the power on.

Press the power switch for four seconds or longer to turn off the computer, confirm that the RAM module conforms to the specifications, and reinsert it.

To start the Setup Utility A Restart the computer. B Press F2 several times while [Panasonic] boot screen is displayed. g n i t o o h s e b u o r T l x i d n e p p A 22 Troubleshooting (Basic) Follow the instructions below when a problem has occurred. There is also an advanced troubleshooting guide in the Reference Manual. For a software problem, refer to the softwares instruction manual. If the problem persists, contact Panasonic Technical Support ( page 36). You can also check the computers status in the PC Information Viewer

( Reference Manual Check the Computers Usage Status).

Starting Up Cannot start up. The power indicator or bat-

tery indicator is not lit.

Connect the AC adaptor.

Insert a fully charged battery.

Remove the battery pack and the AC adaptor, then connect them again.

If a device is connected to the USB port, disconnect the device, or set [USB Port] or

[Legacy USB Support] to [Disable] in the [Advanced] menu of the Setup Utility.

If a device is connected to the ExpressCard slot, disconnect the device, or set [Express-

Card Slot] to [Disable] in the [Advanced] menu of the Setup Utility. The power is turned on but Warming up the system (up to 30 minutes) appears. Cannot turn on the computer. The computer does not resume from standby mode.

(The power indicator blinks quickly in green.) You have forgotten the password. Remove disks or other media. Press any key to restart or a similar mes-

sage appears. Windows startup and opera-

tion is slow. The date and time are incor-

rect.

[Executing Battery Recali-

bration] screen appears.

The computer is warming up before start up. Wait for the computer to start up (takes up to 30 minutes). If, Cannot warm up the system is displayed, the computer failed to warm up and does not start. In this case, turn off the computer, leave it in an envi-

ronment of 5 C {41 F} or higher temperature for about an hour, and then turn on the power once more.

Leave it in an environment of 5 C {41 F} or higher temperature for about an hour, then turn on the power once more. d e t r a t S g n i t t e G

Supervisor Password or User Password: Contact Panasonic Technical Support

( page 36).

Administrator password:

If you have a password reset disk, you can reset the administrator password. Set the disk and enter any wrong password, then follow the on-screen instructions and set a new password. If you do not have a password reset disk, reinstall ( page 20) and set up Win-

dows, and then set a new password.

A floppy disk is in the drive and it does not contain system startup information. Remove the floppy disk and press any key.

If a device is connected to the USB port, disconnect the device, or set [USB Port] or

[Legacy USB Support] to [Disable] in the [Advanced] menu of the Setup Utility.

If a device is connected to the ExpressCard slot, disconnect the device, or set [Express-

Card Slot] to [Disable] in the [Advanced] menu of the Setup Utility.

If the problem persists after removing the disk, it may be a hard disk failure. Contact Panasonic Technical Support ( page 36).

Press F9 in the Setup Utility ( page 22 To start the Setup Utility) to return the Setup Utility settings (excluding the passwords) to the default values. Start the Setup Utility and make the settings again. (Note that the processing speed depends on the application software, so this procedure may not make Windows faster.)

If you installed a resident software after purchase, turn off the residence.

Disable Indexing Service in the following menu. Click [start] - [Search] - [Change preferences] - [With Indexing Service (for faster local searches)].

Make the correct settings. Click [start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Date and Time].

If the problem persists, the internal clock battery may need to be replaced. Contact Panasonic Technical Support ( page 36).

When the computer is connected to LAN, check the date and time of the server.

The 2100 A.D. or later year will not be correctly recognized on this computer.

The Battery Recalibration was canceled before Windows was shut down last time. To start up Windows, turn off the computer by the power switch, and then turn on. n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l 23 Troubleshooting (Basic)

Starting Up

[Enter Password] does not appear when resuming from standby/hibernation. Cannot resume. Other startup problems. d e t r a t S g n i t t e G

Entering Password On the [Enter Password]

screen, a beep sounds and the password cannot be entered. Even after entering the password, [Type your pass-

word] is displayed again.

Shutting down Windows does not shut down.

Display No display. n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 24

The password you have set in the Setup Utility is not requested at resuming. To use the password security at resuming, set the Windows password. A Click [start] - [Control Panel] - [User Accounts] and select the account, and set the password. B Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options]

- [Advanced] and add a check mark for [Prompt for password when computer resumes from standby].

An error may occur when the computer automatically enters the standby or hibernation mode while the screensaver is active. In this case, turn off the screensaver or change the pattern of the screensaver.

Press F9 in the Setup Utility ( page 22 To start the Setup Utility) to return the Setup Utility settings (excluding the passwords) to the default values. Start the Setup Utility and make the settings again.

Remove all peripheral devices.

Check to see if there was a disk error. A Click [start] - [My Computer] and right-click [Local Disk(C:)], and click [Proper-

ties]. B Click [Tools] - [Check Now]. C Select the option in [Check disk options] and click [Start].

Start the computer in Safe Mode and check the error details. When the [Panasonic]

boot screen disappears*1 at startup, press and hold F8 until the Windows Advanced Options Menu is displayed.

*1 When [Password on boot] is set to [Enable] in the [Security] menu of the Setup Util-

ity, [Enter Password] appears after the [Panasonic] boot screen disappears. As soon as you enter the password and press Enter, press and hold F8.

The computer may be in ten-key mode. If the NumLk indicator input. lights, press NumLk to disable the ten-key mode, and then

The computer may be in ten-key mode.

The computer may be in Caps Lock mode. If the NumLk indicator input. If the Caps Lock indicator mode, and then input. lights, press NumLk to disable the ten-key mode, and then lights, press Caps Lock to disable the Caps Lock

Remove the USB device and the ExpressCard.

Wait one or two minutes. It is not a malfunction.

The external display is selected. Press Fn + F3 to switch the display. Wait until the display has been switched completely before pressing Fn + F3 again.

When using an external display, Check the cable connection. Turn on the display. Check the settings of external display.

The display is turned off by the power-saving function. To resume, do not press the direct selection keys, but press any other key like Ctrl.

The computer entered standby or hibernation by the power-saving function. To resume, press the power switch.

Display The screen is dark. The screen is disordered.

<Only for model with Intel GM965 chipset>

During Simultaneous dis-

play, one of the screens becomes disordered.

<Only for model with Intel GM965 chipset>

The screen is darker when the AC adapter is not connected. Press Fn + F2 and adjust the brightness. As you increase the brightness, battery consumption increases. You can separately set the brightness for when the AC adaptor is connected and when not connected.

Changing the number of display colors and resolution may affect the screen. Restart the computer. play as those for the LCD.

When using Simultaneous display, set the same display colors for the external dis-

When using Simultaneous display, do not press Fn +F3.

Connecting/disconnecting an external display may affect the screen. Restart the com-

puter.

When using the Extended Desktop, use the same display colors for the external dis-

play as those used by the LCD.

If you continue to experience problems, try changing the display by clicking [start] -

[Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver for Mobile] -

[Display Devices].

When the [Command Prompt] is set to Full Screen by pressing Alt + Enter, the picture is displayed on one of the screens only. When the window display is restored by pressing Alt + Enter, the picture is displayed on both screens.

Simultaneous display cannot be used until Windows startup is complete (during Setup Utility, etc.). The external display does not work normally.

If the external display does not support the power saving function, it may not work normally when the computer enters the power saving mode. Turn off the external display.

Touch Pad The cursor does not work. Cannot input using the touch pad.

Reference Manual The Reference Manual is not displayed.

When using the external mouse, connect it correctly.

Restart the computer using the keyboard.

, U, and R to select [Restart].)

(Press

If the computer does not respond to keyboard commands, read No response

( page 26).

Set [Touch Pad] to [Enable] in the [Main] menu of the Setup Utility.

The drivers for some mice may disable the touch pad. Check your mouses operat-

ing instructions.

Install Adobe Reader. A Log on to Windows as an administrator. B Click [start] - [Run], input [c:\util\reader\AdbeRdr70_enu_full.exe], then click

[OK]. C Update Adobe Reader to its latest version. If your computer is connected to the internet, start up Adobe Reader and click [Help]

- [Check for updates now]. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 25 Troubleshooting (Basic)

Reinstalling Bs Recorder/Bs CLiP A serial number is requested when reinstalling.

Input the following serial number Bs Recorder: HT5PAA-AAAD-3775-4015 Bs CLiP: HG5PAA-AAAC-2804-1478

Recover Pro cannot be installed when four primary partitions exist. Reduce the number of primary partitions to three or less before installation. You can check the number of the primary partitions in the order of [start] - [Control Panel] - [Performance and Mainte-

nance] - [Administrative Tools] - [Computer Management] - [Disk Management].

Recover Pro cannot be installed when a backup area is remaining on the hard disk. Try one of the following methods:

If the backup area has complete backup data and you want to restore that data:

Follow the Complete Restore instructions in Hard Disk Backup Function (Recover Pro) ( page 18) to restore the data. To return the computer to its condition at the time of shipment:

Reinstall the software ( page 20). In step 10, do not select 3. Reinstall Windows to the first partition. If you do not need the data in the backup area, or if it is corrupted, or if does not include complete backup data:

A Access [http://www.phoenix.com/en/Customer+Services/Utilities/

Recover+Pro+6.htm#Where], and download/install Cleanup Utility for Recover Pro 6. B Delete the backup area using Cleanup Utility for Recover Pro 6. C Reinstall Recover Pro. In this case, all data in the backup area will be lost.

Perform the following steps. A Access [http://www.phoenix.com/en/Customer+Services/Utilities/

Recover+Pro+6.htm#Where], and download/install Cleanup Utility for Recover Pro 6. B Delete the backup region using Cleanup Utility for Recover Pro 6.

The hard disk area encrypted by security software may not be backed up. Exclude the area from the File Backup object.

Press Ctrl+Shift+Esc to open Task Manager and close the software application that is not responding.

An input screen (e.g., password input screen at startup) may be hidden behind another window. Press Alt+Tab to check.

Press the power switch for four seconds or longer to shut down the computer, and then press the power switch to turn it on. If the application program does not work normally, uninstall and reinstall the program. To uninstall, click [start] - [Control Panel] - [Add or Remove Programs].

Recover Pro Cannot install Recover Pro d e t r a t S g n i t t e G An unnecessary backup area is present (is left) when Recover Pro is not installed. Some parts of the hard disk cannot be File Backed up.

Others No response. n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 26 Hardware Diagnostics If it appears that the hardware installed in this computer is not operating properly, you can use the PC-Diagnostic Utility to determine whether or not there is a problem. If the utility discovers a problem in the hardware, contact Panasonic Technical Support. Hardware that can be checked using the PC-Diagnostic Utility Software cannot be checked using this utility.

CPU

Memory

Hard Disk

CD/DVD drive

Video Controller

Sound*1

Modem

LAN

Wireless LAN*2

Wireless WAN*3

Bluetooth*4

USB

IEEE 1394

PC Card Controller

SD Card Controller

Smart Card*5

Serial Port

Keyboard

Touch Pad

*1 The beep will not sound if mute is using Windows.

*2 Only for model with wireless LAN

*3 Only for model with wireless WAN

*4 Only for model with Bluetooth

*5 Only for model with Smart Card slot Regarding the PC-Diagnostic Utility NOTENOTE

Run this utility using the default settings in the Setup Utility. If the Setup Utility or other settings will not allow a hard-

ware to be executed, the hardware icon will be displayed in gray.

For the hard disk and memory only, you can select standard diagnostic check or extended diagnostic check.

When the PC-Diagnostic Utility starts up, it will run the standard diagnostic check. The extended diagnostic check is more detailed, and so requires a longer period of time to run. When the video diagnostic check is running, the display may be distorted, and when the audio diagnostic check is running, sounds may be generated from the speakers. These are not malfunctions.

You can check the status of the diagnostic check by the display color (A) on the left side of the hardware icon. Aqua: Not running diagnostic check Alternating blue and yellow: Currently running diagnostic check. The interval of the alternating colors dif-

fers depending on the type of diagnostic check currently running. During memory diagnostic check, the display may freeze for a long period of time. Wait until the process is complete. A Green: No problems discovered Red: Problems discovered d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l 27 Hardware Diagnostics internal keyboard instead. Operations Select icon Click the icon Complete the PC- Diagnos-

tics Utility and then restart the computer

We recommend that you use the touch pad for operations. When not using the touch pad, you can operate using the Touch pad operations Place the cursor above the icon Tap or click (right click cannot be used) Click

(close) Internal keyboard operations Press Space, and then press

Press Space above the icon Press Ctrl+Alt+Del.

(close) cannot be selected)

By clicking the icon, you can execute the following operations:

: Start the diagnostic check from the beginning

: Stop the diagnostic check (You cannot restart the check partway through by clicking

: Display help (click the screen or press Space to return to the original diagnostic check screen)

) Running the Diagnostic Check 2 Disconnect any peripheral devices (e.g., storage device) before running the diagnostic check. Connect the AC adaptor and turn on the wireless switch. ( page 9) 1 During the diagnostic check, do not remove the AC adaptor, or attach any peripheral devices. Turn on or restart the computer, and press F2 for several times while [Panasonic] boot screen is displayed. The Setup Utility starts up.

If the password is requested, enter the Supervisor Password.

If you are using the computer after changing the settings from the status at the time of purchase, we recom-

mend that you make a note of the settings that are changed. 3 4 5 Press F9. At the confirmation message, select [Yes] and press Enter. Press F10. At the confirmation message, select [Yes] and press Enter. The computer will restart. Press Ctrl+F7 while [Panasonic] boot screen is displayed. When the PC-Diagnostic Utility starts up, it will automatically begin the diagnostic check for all hardware components.

If the password is requested, enter the password.

The touch pad and the internal keyboard cannot be used until alternating blue and yellow colors are displayed on the left side of the hardware icon ( page 27). If the touch pad does not operate properly, press Ctrl+Alt+Del to restart the computer, or press the power switch to turn the power off, and then restart the PC-Diagnostic Utility. NOTENOTE

Using the following procedure, you can run a diagnostic check on a specified hardware component, or run an extended diagnostic check on the memory or the hard disk. A Click B Click the icon for the hardware that is not to be checked, so that the icon is displayed in gray (B). to stop the diagnostic check. When running a check on the memory or the hard disk, clicking the icon once will turn on the extended diagnostic check (FULL (C) will be displayed below the icon); click again, and the icon will be displayed in gray (D). C Click to start the diagnostic check. e.g. hard disk C D d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 28 6 When all the hardware has been checked, confirm the diagnostic check results. If the display is red and the message Check Result TEST FAILED is displayed, you can assume that there is a problem with the computers hardware. Confirm which hardware component is displayed as red, and contact Panasonic Technical Support ( page 36). If the display is green and the message Check Result TEST PASSED is displayed, the computers hardware is operating normally. Continue using the computer as is. If the computer still does not operate properly, reinstall the software ( page 20). NOTENOTE

If you run a memory diagnostic check after installing a new RAM module (sold separately) and the message Check Result TEST FAILED is displayed:

Remove the additional RAM module and run the diagnostic check again. If the message Check Result TEST FAILED is still displayed, you can assume that there is a problem with the internal RAM module. 7 After the diagnostic check is complete, click the computer.

(close), or press Ctrl+Alt+Del to restart d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 29 LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) (PROGRAMS) FURNISHED WITH THIS PANASONIC PRODUCT (PRODUCT) ARE LICENSED ONLY TO THE END-USER (YOU), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Matsushita Electric Industrial Co., Ltd. (MEI) has developed or otherwise obtained the Programs and hereby licenses their use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) to achieve your intended results, and for the installation, use and results obtained therefrom. LICENSE A. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving only a LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title, ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms, concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all of which title, ownership and rights shall remain with MEI or its suppliers. B. You may use the Programs only on the single Product which was accompanied by the Programs. C. You and your employees and agents are required to protect the confidentiality of the Programs. You may not distrib-

ute or otherwise make the Programs or related documentation available to any third party, by time-sharing or other-

wise, without the prior written consent of MEI. D. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation for any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of your use of the Programs on the single Product which was accompanied by the Programs. You shall not modify, or attempt to modify, the Programs. E. You may transfer the Programs and license them to another party only in connection with your transfer of the single Product which was accompanied by the Programs to such other party. At the time of such a transfer, you must also transfer all copies, whether in printed or machine readable form, of every Program, and the related documentation, to the same party or destroy any such copies not so transferred. F. You may not remove any copyright, trademark or other notice or product identification from the Programs and you must reproduce and include any such notice or product identification on any copy of any Program. YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART. YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE. IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PER-

MITTED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED. TERM This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminate this license at any time by destroying, at your expense, the Programs and related documentation together with all cop-

ies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditions thereof set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon any such termination, you agree to destroy, at your expense, the Programs and related documentation together with all cop-

ies thereof in any form. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-

MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MAT-

TER OF THIS AGREEMENT. About Intel software products The enclosed software products and documentation were developed at private expense, and are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the government is subject to restrictions as set forth in FAR 52.227-14 and DFARS 252.227-7013 et. seq. or its successor. The use of this product by the government constitutes acknowledgment of Intels proprietary rights in the product. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 30 Contrat de licence dusage limit Le(s) logiciel(s) (les Logiciels) fournis avec ce produit Panasonic (le Produit) sont exclusivement concds en licence lutilisateur ultime (vous), et ils ne peuvent tre utiliss que conformment aux clauses contractuelles cidessous. En utilisant les logiciels, vous vous engagez de manire dfinitive respecter les termes, clauses et conditions des prsentes. Matsushita Electric Industrial Co., Ltd. (MEI) a mis au point ou obtenu les Logiciels et vous en concde lutilisation par les prsentes. Vous assumez lentire responsabilit du choix de ce Produit (y compris des Logiciels associs) pour obtenir les rsultats escompts, ainsi que de linstallation, de lutilisation et des rsultats obtenus. Licence A. MEI vous octroie par les prsentes le droit et la licence personnels, non cessibles et non exclusifs dutiliser les Logiciels conformment aux termes, clauses et conditions de ce contrat. Vous reconnaissez ne recevoir quun droit limit dutiliser les Logiciels et la documentation les accompagnant et vous vous engagez nobtenir aucun droit de titre, proprit ni aucun autre droit vis--vis des Logiciels et de la documentation les accompagnant ni vis--vis des algorithmes, concepts, dessins, configurations et ides reprsents par ou incorpors dans les Logiciels et la documentation les accompagnant, dont les titres, la proprit et les droits resteront tous MEI ou leurs propritaires. B. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accompagn par les Logiciels. C. Vous et vos employs ou agents tes requis de protger la confidentialit des Logiciels. Vous ne pouvez ni distribuer ni mettre les Logiciels et la documentation les accompagnant la disposition dun tiers, par partage de temps ou de quelque autre manire que ce soit, sans lautorisation crite pralable de MEI. D. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la documentation les accompagnant pour quelque fin que ce soit, lexception dune (1) copie des Logiciels des fins de sauvegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est accompagn par les Logiciels. Vous ne pouvez ni modifier ni tenter de modifier les Logiciels. E. Vous ne pouvez cder les Logiciels et en octroyer la licence une autre partie quen rapport avec votre cession du Produit unique qui est accompagn par les Logiciels cette autre partie. Au moment de cette cession, vous devez cder galement toutes les copies, que ce soit sous forme imprime ou lisible par la machine, de tous les Logiciels ainsi que de la documentation les accompagnant, la mme partie ou dtruire les copies non cdes. F. Vous ne pouvez retirer aucune marque de droits dauteur, marque de commerce ou autre ni aucune identification de produit des Logiciels et vous devez reproduire et inclure toutes ces notices ou identifications de produit sur toutes les copies des Logiciels. Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurs copies, de faon lectronique ou mcanique, en tout ou en partie. Vous ne pouvez utiliser, copier, modifier, altrer ni cder les Logiciels ni aucune de leurs copies, en tout ou en partie, lexception de ce qui est expressment stipul dans ce contrat. Si vous cdez la possession de toute copie ou de tout Logiciel une autre partie, lexception de ce qui est autoris au paragraphe E ci-dessus, votre licence est automatiquement rsilie. Termes, clauses et conditions Cette licence nest effective que pour la dure de possession ou de crdit-bail du Produit, moins dune rsiliation antrieure. Vous pouvez rsilier cette licence tout moment en dtruisant, vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera galement rsilie, avec application immdiate, si les conditions de rsiliation dfinies ailleurs dans ce contrat se sont ralises ou si vous ne respectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la rsiliation, vous acceptez de dtruire, vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accept de respecter ses termes, clauses et conditions. Vous reconnaissez en outre quils sont la description complte et exclusive du contrat conclu entre nous, contrat qui remplace et annule toute proposition ou contrat prcdent, crit ou oral, et toute autre communication entre nous, relativement lobjet du prsent contrat. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 31 Specifications This page provides the specifications for the basic model CF-52AJCBDBM / CF-52BJCBZBM / CF-52AJCHDBM / CF-

52CCABXBM / CF-52DCABZBM. The model number is different according to the unit configuration.

To check the model number:

Check the bottom of the computer or the box the computer came in at the time of purchase.

To check CPU speed, memory size and the hard disk drive (HDD) size:

Run the Setup Utility (

[CPU Speed]: CPU speed, [System Memory]: Memory size, [Hard Disk]: Hard disk drive size Reference Manual Setup Utility) and select [Information] menu.

Main Specifications Model No. CPU Chipset Memory*1*2 Video Memory*1*3 Hard Disk Drive*4 CD/DVD drive Display Method Internal LCD*5 External Display*6 Wireless LAN*7 Bluetooth*8 LAN Modem Sound Security Chip Card Slot CF-52CCABXBM / CF-52DCABZBM Intel Core 2 Duo Processor T7100

(1.8 GHz, 2 MB*1 L2 cache, 800 MHz FSB) Mobile Intel GM965 Express Chipsets 1024 MB (4096 MB Max.) UMA (128 MB Max.) 80 GB CF-52AJCBDBM / CF-52BJCBZBM /

CF-52AJCHDBM Intel Core 2 Duo Processor T7300

(2.0 GHz, 4 MB*1 L2 cache, 800 MHz FSB) Mobile Intel PM965 Express Chipsets 1024 MB (4096 MB Max.) 512 MB 120 GB

page 33 15.4 WUXGA type (TFT) 65,536/16,777,216 colors

(800 600 dots/1024 768 dots/1280 768 dots/1600 1200 dots/1920 1080 dots/

1920 1200 dots) 65,536/16,777,216 colors (800 600 dots/1024 768 dots/1280 768 dots/1280 1024 dots/

1600 1200 dots/1920 1080 dots/1920 1200 dots/2048 1536 dots)

page 34

page 34 IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T Data: 56 kbps (V.92) FAX: 14.4 kbps WAVE and MIDI playback, Stereo speaker, Intel High Definition Audio subsystem support TPM (TCG V1.2 compliant)*9 Type I or Type II x 1 (3.3 V: 400 mA, 5 V: 400 mA) ExpressCard/34 or ExpressCard/54 x 1 15.4 WXGA type (TFT) 65,536/16,777,216 colors (800 600 dots/

1024 768 dots/1280 768 dots/1280 800 dots) PC Card ExpressCard SD Memory Card*10 x 1, Data transfer rate = 8 MB per second*11 Smart Card*12 RAM Module Slot Interface Keyboard / Pointing Device Power Supply AC Adaptor*13 x 1 200-pin, 1.8 V, SO-DIMM, DDR2 SDRAM, PC2-5300 Compliant USB port (4-pin, USB 2.0) x 4, Serial Port (Dsub 9-pin male), Modem port (RJ-11), LAN port

(RJ-45), External display port (Mini Dsub 15-pin female), IEEE1394a Interface Connector (4-pin 1), Microphone Jack (Miniature jack, 3.5 DIA, Stereo), Headphone Jack (Miniature jack, 3.5 DIA, Impedance 32 , Output Power 4 mW 2, Stereo) 87 keys / Touch Pad AC adaptor or Battery pack Input: 100 V to 240 V AC, 50 Hz/60 Hz, Output: 15.6 V DC, 8.0 A d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 32

Main Specifications Model No. Battery Pack Operating Time*14 Charging Time*14 Clock Battery Power Consumption*17 Physical Dimensions (W H D)

(including the carrying handle) Weight

(including the carrying handle) Operation Environment Storage Environment Operating System Utility Programs

CD/DVD Drive CD/DVD Drive Data Transfer Rate*21 Reading*22 Writing*23 Reading Supported Discs/

Format*4 Writing CF-52CCABXBM / CF-52DCABZBM Approx. 2.5 hours to 5.5 hours*15

(Approx. 5.5 hours*16) CF-52AJCBDBM / CF-52BJCBZBM /

CF-52AJCHDBM Li-ion 11.1 V, 7.65 Ah Approx. 2 hours to 4 hours*15

(Approx. 4 hours*16) Approx. 4.5 hours Coin type lithium battery 3.0 V Approx. 60 W*18/ Approx. 100 W

(Maximum when recharging in the ON state) 355 mm 46 - XX.X mm 257 mm {XX.X" X.X - X.X" XX.X"}

Approx. 45 W*18/ Approx. 100 W

(Maximum when recharging in the ON state) Approx. X.X kg {Approx. 6.96 lb.}

Temperature: 5 C to 35 C {41 F to 95 F}

Humidity: 30% to 80% RH (No condensation) Temperature: -20 C to 60 C {-4 F to 140 F}

Humidity: 30% to 90% RH (No condensation) Microsoft Windows XP Professional Service Pack 2 with Advanced Security Technologies

(NTFS File System) DMI Viewer, Adobe Reader, PC Information Viewer, SD Utility, Icon Enlarger, Loupe Utility, WinDVD 5 (OEM Version), Bs Recorder GOLD8 BASIC, Bs CLiP 6, Intel PROSet/Wireless Software*7, Bluetooth Stack for Windows by TOSHIBA*8, Wireless Switch Utility, Hotkey Settings, Battery Recalibration Utility, Infineon TPM Professional Package*20, Recover Pro 6*20 Setup Utility, Hard Disk Data Erase Utility*19 DVD MULTI Drive DVD-ROM: 8X (Max.), CD-ROM: 24X (Max.) CD-R: 4X/10X/10-16X/10-20X/10-24X CD-RW: 4X High-Speed CD-RW: 4X/10X Ultra-Speed CD-RW: 4X/10X/10-16X/10-20X/10-24X DVD-R: 1X/2X/2-4X/2-6X/2-8X DVD-RW: 1X/2X/2-4X/2-6X DVD-RAM: 2X/3X/3-5X

+R: 2.4X/2.4-4X/2.4-6X/2.4-8X

+R DL: 2.4X/2.4-4X

+RW: 2.4X/2.4-4X High-Speed +RW: 3.3X/3.3-6X/3.3-8X DVD-ROM (4.7 GB, 8.5 GB, 9.4 GB, 17 GB), DVD-Video, DVD-R (1.4 GB, 3.95 GB, 4.7 GB), DVD-R DL (8.5 GB), DVD-RW*24 (1.4 GB, 2.8 GB, 4.7 GB, 9.4 GB), DVD-RAM*25 (1.4 GB, 2.8 GB, 4.7 GB, 9.4 GB), +R (4.7 GB), +R DL (8.5 GB), +RW (4.7 GB), CD-Audio, CD-ROM, CD-R, Photo CD, Video CD, CD-RW, CD TEXT, CD-EXTRA DVD-R (1.4 GB, 4.7 GB for General), DVD-R DL (8.5 GB), DVD-RW*24 (1.4 GB, 2.8 GB, 4.7 GB, 9.4 GB), DVD-RAM*25 (1.4 GB, 2.8 GB, 4.7 GB, 9.4 GB),

+R (4.7 GB), +R DL (8.5 GB), +RW (4.7 GB), CD-R, CD-RW d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 33 Specifications

Wireless LAN <Only for model with wireless LAN>

Intel Wireless WiFi link 4965 AGN (802.11 a + b + g)*26 Data Transfer Rates*27 Standards Supported Transmission method Wireless Channels Used RF Frequency Band IEEE802.11a: 54/48/36/24/18/12/9/6 Mbps (automatically switched) IEEE802.11b: 11/5.5/2/1 Mbps (automatically switched) IEEE802.11g: 54/48/36/24/18/12/9/6 Mbps (automatically switched) IEEE802.11a/IEEE802.11b/IEEE802.11g OFDM system, DSSS system IEEE802.11a: Channels 36/40/44/48/52/56/60/64/149/153/157/161/165 IEEE802.11b/IEEE802.11g: Channels 1 to 11 IEEE802.11a: 5.18-5.32 GHz, 5.745-5.825 GHz IEEE802.11b/IEEE802.11g: 2.412-2.462 GHz

*14 Varies depending on the usage conditions.

*15 Measured using BatteryMark Version 4.0.1 (LCD bright-

ness: Maximum - Minimum)

*16 Measured using MobileMark 2005 (LCD brightness: 60 cd/m2)

*17 Approx. 0.9 W when the battery pack is fully charged (or not being charged) and the computer is OFF. Approx. 1.5 W when the Wake up from LAN has been enabled. This product meets the ENERGY STAR guideline for energy efficiency.

*18 Rated power consumption 23-E-1

*19 The Product Recovery DVD-ROM is required.

*20 You need to install to use the feature.

*21 The data transfer rate of DVD per 1X speed is 1,350 KB/s. The data transfer rate of CD per 1X speed is 150 KB/s.

*22 If an unbalanced disc (e.g., the balance has been displaced from the center) is inserted, the speed may become slower if there are large vibrations while the disc is rotating.

*23 Depending on the disc, the writing speed may become slower.

*24 Does not support DVD-RW Ver.1.0.

*25 DVD-RAM: Only non-cartridge type or removable cartridge type can be used.

*26 It does not correspond to IEEE802.11n.

*27 These are speeds specified in IEEE802.11a+b+g standards. Actual speeds may differ.

Bluetooth <Only for model with Bluetooth>

Bluetooth Version Transmission method Wireless Channels Used RF Frequency Band

*1 1MB = 1,048,576 bytes

*2 You can physically expand the memory up to 4 GB, but the total amount of usable memory available will be less depend-

ing on the actual system configuration. 2.0 + EDR FHSS system Channels 1 to 79 2.402-2.48 GHz

*3 A segment of the main memory is allotted automatically depending on the computers operating status. The size of the Video Memory cannot be set by the user.

*4 1GB = 1,000,000,000 bytes. Your operating system or some application software will report as fewer GB.

*5 A 16,777,216 color display is achieved by using the dithering function. external display.

*6 Maximum resolution depends on the specifications of the

*7 Only for model with wireless LAN

*8 Only for model with Bluetooth

*9 For information on TPM, click [start] - [Run] and input c:\util\drivers\tpm\README.pdf, and refer to the Installation Manual of Trusted Platform Module (TPM).

*10 Operation has been tested and confirmed using Panasonic SD Memory Cards with a capacity of up to 2 GB. Operation on other SD equipment is not guaranteed. This computer is not compatible with MultiMediaCards or SDHC Memory Cards. Do not insert these kinds of cards.

*11 Theoretical value and not the actual speed. The transfer rate does not become higher even if you use a card that supports the higher transfer rate.

*12 Only for model with Smart Card slot

*13 <Only for North America>

The AC adaptor is compatible with power sources up to 240 V AC adaptor. The computer is supplied with a 125 V AC compatible AC cord. 20-M-2-1 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 34 LIMITED WARRANTY For U.S.A. Panasonic Computer Solutions Company - Worldwide Product Warranties Section 1: Limited Warranty - Hardware Panasonic Computer Solutions Company (referred to as Panasonic) will repair the products listed below with new or rebuilt parts, free of charge in the U.S.A. or other Panasonic approved location for the period specified below from the date of original purchase in the event of a defect in materials or workmanship. These warranties are extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required before warranty performance is rendered. Laptop Computers 3 Years PDRC - LCD and Keyboard Assemblies 3 Years MDWD Mobile Computer and Wireless Display Assemblies (CF-07/CF-08) - 3 Years Hand-held Computers (P1/P2) 1 Year Arbitrator Video Camera 1 Year Arbitrator Recorder Unit 1 Year Arbitrator Remote Control Panel 1 Year Arbitrator Wireless Receiver Unit 1 Year Arbitrator P2 Card(s) (All Sizes) 1 Year Arbitrator Wireless Microphone(s) / Transmitter 90 Days Arbitrator System Component Interconnect Cables 90 days Main Battery d e t r a t S g n i t t e G The battery supplied with the product is covered under the warranty for one (1) year from date of purchase, except as excluded in Section 3. Batteries purchased separately are covered under the warranty for one (1) year from the date of purchase. A battery fur-

nished under the warranty is covered for the remaining period of the one year warranty on the original or purchased battery. Options and Accessories The below listed Panasonic brand or supplied options and accessories are covered under this limited warranty for the period speci-

fied from the date of purchase or as specifically stated:

AC Adaptor / Power Cord 3 Years Memory Card (Panasonic Brand) 3 Years Car Mount Docking Station PCB or Complete Vehicle Docking Station 3 Years Port Replicator / I-O Box / Device Cradle (like CF-08) 3 Years Antenna Pass-through Cable 3 Years Backlit or Full-sized keyboard - 3 Years or assumes warranty of the unit in which it is installed Integrated Panasonic supplied options and kits including, but not limited to Wireless WAN, Media Bay Drives (Floppy, CD/

DVD), GPS, Bluetooth, Smartcard Reader, and Fingerprint readers 3 Years or assumes warranty period of the unit in which it is installed provided the integration was performed by Panasonic or an Authorized Options Integrator. Hard Drive (separately purchased) 1 Year External USB Drives (CD / DVD / Floppy / Hard Drive) 1 Year Optional Battery 1 Year Battery Charger 1 Year Standard or Digitizer Stylus Pens 90 Days (physical damage excluded) Section 2 - Limited Warranty - Software Panasonic Computer Solutions Company (referred to as Panasonic) warrants to you only that the disk(s) or other media on which the Programs are furnished will be free from defects in material and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof to you, as evidenced by your purchase receipt. This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your requirements or that the operation of the Programs will be uninterrupted or error free. Panasonic shall have no obligation for any defects in the disk(s) or other media on which the Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media. Panasonics entire liability and your exclusive remedy under this warranty shall be limited to the replacement, in the United States or other Panasonic designated location, of any defective disk or other media which is returned to Panasonics Authorized Service Cen-

ter, together with a copy of the purchase receipt, within the aforesaid warranty period. The customer is responsible for ensuring that all data is backed up and made secure during normal use and before sending a unit for service. n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 35 LIMITED WARRANTY Section 3 - Limited Warranty Exclusions Specifically excluded from the warranty are:

All consumable items; such as screen protection films, logo badges, labels, cleaning cloths, carry cases, manuals, cables, straps, belts, holsters, tethers, and harnesses and any other options and accessories not listed above or covered under a sep-

arate warranty. Failures related to the product operating system, hard drive image, software setup, software program, virus, other program(s) or file(s) on the hard drive or in any computer memory location. Failures due to BIOS settings or changes, as well as any cosmetic or physical damage to the unit. Any unit or device with a missing or altered model number or serial number label Damage which occurs in shipment Failures which are caused by products not supplied by Panasonic Failures which result from alteration, accident, misuse, introduction of liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance or modification, use not in accordance with product use instructions Failures due to service by anyone other than a Panasonic Authorized Service Provider Failures caused by improper integration by any company other than Panasonic Configuration and Integration Centers. Damage, failure, or loss due to the unit being stolen, lost, misplaced, or used by anyone other than the original purchaser Damage that is attributable to acts of God This warranty only covers failures due to defects in materials or workmanship which occur during normal use. THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CON-

TROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*1. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.

*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Sys-

tems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36 Other Limits and Exclusions: There are no other express warranties except as listed above. PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclu-

sion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. For technical support or to arrange for service on your Panasonic computer product, call our toll-free 24 hour hotline at 1-800-

LAPTOP5. DIAL TOLL FREE: 1-800-LAPTOP5 (1-800-527-8675) Web Site : www.panasonic.com/toughbook d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 36 For Canada PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY Coverage Panasonic Canada Inc. (PCI) warrants to you, the first end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms set forth below, during the period of warranty coverage specified. Scope of Coverage Laptop Computers (except Battery) and AC Adaptor Factory/PCI installed options including Wireless WAN, GPS, Type of Failure Coverage Defective Materials or Work-

manship Period of Coverage Three (3) Years from Date of Original End User Customer Purchase Bluetooth, Finger print reader, Backlit keyboard, Memory Card and Media Bay Drives (Floppy, CD/DVD) Mobile Wireless Display PDRC LCD and Keyboard Assemblies Port Replicator Hand-held Computers Battery Battery charger Auto Adaptor External USB Drives Standard or Digitizer Stylus Pen One (1) Year from Date of Original End User Customer Purchase Defective Materials or Work-

manship Ninety (90) Days from Date of Original End User Customer Purchase No Coverage Defective Materials or Work-

manship d e t r a t S g n i t t e G All consumable items including protection film, cleaning cloth, carry case, tether and harness Remedy In the event of a warranty claim, contact PCIs representatives within the applicable warranty period, identifying the nature of the defect claimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. Fri. (excluding holidays) for instructions on how to obtain service. A purchase receipt or other proof of date of original purchase is required before warranty ser-

vice is performed. Defective parts covered by this Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair is subject to the terms of this Limited Warranty for the balance of the original period of warranty coverage. No Coverage This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defects in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, intro-

duction of liquid or other foreign matter into the product, alteration or servicing by anyone not authorized by PCI, or act of God. THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CON-

TROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*2. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.

*2 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Sys-

tems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36 Carefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original purchase. No liability is assumed for loss or damage to the product while in transit, if you chose your own transportation carrier. IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICE SOFTWARE MEDIA LIMITED WARRANTY Coverage PCI warrants to you, the first end user customer, that the disk(s) or other media on which software program(s) is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receipt as evidenced by your purchase receipt for your Panasonic Computer product. THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software. Please refer to the software licensors written warranty (accompanying the copy of the software) for any software warranty claim. Claim Procedure In the event of a defect in material or workmanship in the media during the sixty (60) day warranty period, and you return it, transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, 5770 Ambler Drive, Missis-

sauga, Ontario L4W 2T3, within the warranty period, together with a copy of your purchase receipt, and an explanation of the sus-

pected defect, PCI will replace in Canada the defective disk(s) or other media. Remedy PCIs entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only. It does not cover any other damages, including, but not limited to, loss of use or profit loss, or special, indirect or conse-

quential damages, or other claims, whether or not of similar character. No Coverage This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmental conditions other than those specified by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modification or attempted modification of the program, or if damaged by accident or act of God. PCI is not responsible for damage to or loss of any program, data or removable storage media. GENERAL NO OTHER WARRANTIES PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE, SOFTWARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES. NO LIABILITY FOR CONSEQUENTIAL DAMAGES IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THE COMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL. IN ANY EVENT, PCIS MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THE COMPUTER PRODUCT. NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION AROSE. Statutory Warranties Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you. n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 37 GARANTIE LIMITE Pour le Canada GARANTIE LIMITE ORDINATEURS ET PRIPHRIQUES PANASONIC Couverture Panasonic Canada Inc. ( PCI ) garantit lacheteur original que ce produit informatique ( lexclusion des supports des logiciels) est, au moment de sa vente par PCI ou dun revendeur agr par PCI, exempt de dfauts de pices et de fabrication dans les con-

ditions normales dutilisation, et ce, pendant la priode de couverture de la garantie, sous rserve des modalits dcrites ci-dessous. lments couverts Ordinateurs blocs-notes (sauf batteries) et adaptateur secteur Options installes en usine/par PCI incluant : WAN sans fil, GPS, Bluetooth, lecteur dempreintes digitales, clavier rtro-

clair, carte mmoire et lecteurs (disquettes, CD/DVD) Type de couverture Dfauts de pices et de fabrica-

tion Dure de couverture Trois (3) ans partir de la date dachat original. cran mobile sans fil Ensembles PDRC ACL et clavier Duplicateur de port Ordinateurs de poche Batterie Chargeur de batterie Adaptateur pour voiture Priphriques USB Stylo pointeur standard ou pour numriseur graphique Tous les articles consommables incluant les pellicules protectrices, chiffons de nettoyage, tuis de transport, longes et sangles Un (1) an partir de la date dachat original. Dfauts de pices et de fabrica-

tion Quatre-vingt-dix (90) jours partir de la date dachat original. Aucune couverture Dfauts de pices et de fabrica-

tion Recours Pour obtenir des informations sur la marche suivre dans le cas o une rclamation en vertu de la garantie deviendrait nces-

saire, communiquez par tlphone avec un reprsentant de PCI au 1-800-668-8386, entre 9h00 et 17h00 (heure de lEst) du lundi au ven-

dredi (sauf les jours fris), avant lchance de la garantie applicable, en prenant soin didentifier la nature de la dfaillance. Un reu ou toute autre pice justificative de la date dachat original sera exig avant toute rparation. Toute pice dfectueuse couverte par la prsente garantie limite sera rpare ou remplace par une pice neuve ou remise neuf. Le remplacement ou la rparation sera fait conform-

ment aux modalits de la prsente garantie limite pendant la dure restante de la priode originale de la garantie. Produits non couverts La prsente garantie limite ne couvre pas les produits achets lextrieur du Canada. Elle ne couvre pas non plus les dommages, la dfaillance ou les dfauts attribuables une manutention inadquate, une mauvaise installation, une utilisation anormale ou abusive, de la ngligence, un accident, un dversement ou la pntration dun objet tranger, une modifica-

tion, un cas fortuit ou une rparation effectue par une personne non agre par PCI. CE PRODUIT NEST PAS DESTIN TRE UTILIS, EN TOUT OU EN PARTIE, COMME SYSTME/QUIPEMENT NUCLAIRE, SYSTME/

QUIPEMENT DE CONTRLE DU TRAFFIC ARIEN OU SYSTME/QUIPEMENT DE POSTE DE PILOTAGE DAVION*3. PANASONIC DCLINE TOUTE RESPONSABILIT CONCERNANT LUTILISATION DE CE PRODUIT DANS LES CAS SUSMENTIONNS.

*3 Les SYSTMES/QUIPEMENTS DE POSTE DE PILOTAGE DAVION sont dots de systmes OEPP (organiseur lectronique de poste de pilotage) de classe 2 et de classe 1 utiliss pendant des phases critiques de vol (par exemple, pendant le dcollage et latterrissage) et(ou) monts sur lavion. Les systmes OEPP de classe 1 et de classe 2 sont dfinis par le circulaire dinforma-

tion FAA: AC (Advisory Circular) 120-76A ou le feuilet n 36 JAA: JAA TGL (Temporary Guidance Leaflets) No 36. EXPDITION DU PRODUIT POUR SERVICE SOUS GARANTIE Emballez soigneusement le produit, de prfrence dans son emballage dorigine. Joignez une description de la dfaillance de mme quune pice justificative de la date dachat. Panasonic Canada Inc. ne peut tre tenue responsable pour tout dommage ou perte subi pendant le transport si vous avez choisi le transporteur. GARANTIE LIMITE SUPPORTS DES LOGICIELS Couverture Panasonic Canada Inc. ( PCI ) garantit lacheteur original que la ou les disquettes ou tout autre support sur lequel le ou les programmes sont fournis sont exempts de dfauts de pices et de fabrication dans des conditions normales dutilisation au Canada, et ce, pour une priode de soixante (60) jours suivant la date de rception indique sur la preuve dachat. LA PRSENTE GARANTIE EST LA SEULE OFFERTE PAR PCI COUVRANT LES SUPPORTS DE LOGICIELS. PCI ne garantit pas les logiciels. Reportez-vous la garantie crite du concdant de licence dutilisation du logiciel (qui accompagne la copie du logiciel) pour toute rclamation en vertu de la garantie. Rclamation marche suivre Panasonic Canada Inc. remplacera toute disquette ou support dfectueux si larticle en question est retourn, port pay, son service de Marketing produits informatiques, 5770 Ambler Drive, Mississauga (Ontario) L4W 2T3, dans les soixante

(60) jours suivant la date dachat original. Joignez votre envoi une pice justificative de votre achat et une description du problme. Recours La responsabilit de PCI - et votre seul recours - dans le cas de toute dfaillance couverte par la garantie sur ce support de logiciel est limite au seul remplacement du support. Elle ne couvre aucun autre dommage, y compris, mais non exclusivement, la perte dusage ou de profits, ni aucun dommage spcial, indirect ou conscutif, ni aucune autre rclamation de nature similaire ou autre. Produits non couverts La prsente garantie limite ne sapplique pas si la ou les disquettes ou autre support ont t utiliss dans un produit dune marque autre que Panasonic ou dans des conditions environnementales autres que celles spcifies par PCI ou le fabricant, ou soumis une mauvaise utilisation, la ngligence, une manutention inadquate ou encore si le programme a t modifi ou subi une tentative de modification ou des dommages attribuables un accident ou un cas fortuit. De plus, PCI nassume aucune responsabilit pour toute perte de, ou tout dommage , un programme, des donnes ou un support de sauvegarde amovible. GNRALITS PCI NE RECONNAT AUCUNE AUTRE GARANTIE, EXPLICITE OU IMPLICITE, Y COMPRIS, MAIS NON EXCLUSIVEMENT, LES GARANTIES IMPLICITES DE VALEUR COMMERCIALE ET DUTILIT UNE FIN QUELCONQUE, LGARD DU LOGICIEL, SUPPORTS DE LOGICIELS, PRODUITS INFORMATIQUES, PRIPHRIQUES ET ACCESSOIRES. SOUS AUCUNE CIRCONSTANCE PCI NE POURRA TRE TENUE RESPONSABLE DES DOMMAGES SPCIAUX, INDIRECTS OU CONSCUTIFS ATTRIBUABLES UN MANQUEMENT AUX GARANTIES LIMITES DCRITES DANS LE PRSENT DOCUMENT OU LUTILISATION DU PRODUIT INFORMATIQUE, Y COMPRIS, SANS RESTRICTION, LA PERTE DE DONNES, DAFFAIRES, DACHALANDAGE OU DE PROFIT. DANS TOUS LES CAS, LA RESPONSABILIT MAXIMALE DE PCI POUR TOUT MANQUEMENT NE POURRA EXCDER LE PRIX DE VENTE DU PRODUIT INFORMATIQUE. AUCUNE RCLAMATION, SANS GARD SES MOTIFS, NE POURRA TRE FAITE AUPRS DE PCI PLUS DE DEUX (2) ANS APRS LES FAITS INVOQUS LA BASE DUNE TELLE RCLAMATION. Garantie statutaires Certaines juridictions interdisent de telles limitations ou exclusions; aussi, pourraient-elles ne pas sappliquer. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 38 MEMO d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 39 As an ENERGY STAR Partner, Matsushita Electric Industrial Co., Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Outline of the International ENERGY STAR Office Equipment Program The international ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissem-

ination of products with functions that effectively reduce energy consumption. It is an open system in which busi-

ness proprietors can participate voluntarily. The targeted products are office equipment such as computers, displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations. For information about ENERGY STAR, refer to the following web site:

http://www.energystar.gov 22-E-2 Panasonic Computer Solutions Company 3 Panasonic Way, Panazip 2F-5, Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Printed in Taiwan TA0507-0 DFQW5048ZAT