FCC ID: ACJ9TGFZG2 Personal Computer

 

OPERATING INSTRUCTIONS Read Me First Personal Computer Model No. FZ-G2 series Contents Read Me First / Lecture prliminaire Safety Precautions / Mesures de scurit .......2 Regulatory Information / Informations rglementaires .....15 Getting Started Before Turning on the Computer .................26 First-time Operation .....................................27 Detaching the tablet from the keyboard base .... 33 Attaching the tablet to the keyboard base .... 34 Appendix Software License .........................................36 t s r i F e M d a e R d e t r a t S g n i t t e G x i d n e p p A n Terms and illustrations in these instructions In these instructions, the names and terms are referred as follows. Windows 10 Pro as Windows or Windows 10 This manual explains operation procedures using the touchpad or mouse as typical examples. In addition, you can touch the display screen to operate the computer. When using the touch operation, please replace the terms as described below, and read the instructions. Operation terms to be replaced:

- Click Touch

(Settings):

(Settings).

Click

(Start) and then click Page in these Operating Instructions. Reference to the on-screen manuals. Please read these instructions carefully before using this product, and save this manual for future use. Update the on-screen manuals. Veuillez lire attentivement ces instruction avant dutiliser ce produit et conservez ce manuel pour une prochaine utilisation. Mettez jour les manuels qui figurent lecran. Safety Precautions To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbol word panels The following symbol word panels are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed. DANGER Denotes a potential hazard that will result in serious injury or death. WARNING Denotes a potential hazard that could result in serious injury or death. CAUTION Denotes a hazard that could result in mi-

nor injury. NOTICE Denotes a hazard that could result in property damage. The following symbols are used to classify and describe the type of instructions to be observed. This symbol is used to alert users to a specific operating procedure that must not be performed. This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safety. DANGER Precautions on the Battery Pack Electrolyte leakage, generation of heat, ignition or rupture of the Battery Pack may result. n Do Not Throw the Battery Pack into a Fire or Expose It to Ex-

cessive Heat n Do Not Deform, Disassemble, or Modify the Battery Pack n Do Not Short the Positive (+) and Negative (-) Contacts Do not place the battery pack together with articles such as necklaces or hairpins when car-

rying or storing. n Do Not Apply Shocks to the Product by Dropping It, Apply-

ing Strong Pressure to It, etc. If this product is subjected to a strong impact, remove the battery pack from the computer immediately. n Do Not Charge the Battery Us-

ing Methods Other Than Those Specified n Do Not Use the Battery Pack with Any Other Product The battery pack is rechargeable and was intended for the speci-

fied product. n Do Not Use This Product with a Battery Pack Other Than the One Specified Use only the specified battery pack with your product. n Avoid Extreme Heat (Near the Fire, in Direct Sunlight, for Ex-

ample) n When the Battery Pack Has De-

teriorated or If Abnormal Swell-

ing Occur, Replace It with a New One Do not continue to use a dam-

aged battery pack. 2 Read Me First DANGER Precautions on the Battery Pack Electrolyte leakage, generation of heat, ignition or rupture of the Battery Pack may result. WARNING

<Only for model with Built-in Bridge Bat-

tery>

Generation of heat, ignition or rupture of the Built-in Bridge Battery may result. n If a Malfunction or Trouble Oc-

curs, Immediately Stop Use If the battery pack appears to be damaged or deformed, or if it emits smoke, abnormal odor, excessive heat, or other abnor-

mality, remove it from the com-

puter immediately. DANGER Precautions on the Built-in Bridge Battery (for disposal)

<Only for model with Built-in Bridge Bat-

tery>

When disposing the battery, generation of heat, ignition or rupture of the Built-in Bridge Battery may result. Handling This Computer n Do Not Disassemble the Com-

puter Except When Disposing of It Handling the Built-in Bridge Bat-

tery n Do Not Short the Positive (+) and Negative (-) Contacts n Do Not Throw the Battery into a Fire or Expose It to Excessive Heat n Do Not Apply Shocks to the Built-in Bridge Battery by Drop-

ping It, Applying Strong Pres-

sure to It, etc. n Do Not Charge n Do Not Use n Do Not Deform, Disassemble, or Modify the Built-in Bridge Bat-

tery n Avoid Extreme Heat (Near the Fire, in Direct Sunlight, for Ex-

ample) Fire or electric shock may result. n Do Not Throw This Product Into a Fire or Expose It to Excessive Heat n Do Not Deform, Disassemble, or Modify This Product n Do Not Apply Shocks to the Product by Dropping It, Apply-

ing Strong Pressure to It, etc. n Do Not Charge the Battery Us-

ing Methods Other Than Those Specified n Avoid Extreme Heat (Near the Fire, In Direct Sunlight, for Ex-

ample) n When the Built-in Bridge Battery Has Deteriorated or If Abnormal Swelling Occur, Contact Your Technical Support Office to Re-

place the Battery n Do Not Do Anything That May Damage the AC Cord, the AC Plug, or the AC Adaptor Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy objects on it, or bundle it tightly. Do not continue to use a dam-

aged AC cord, AC plug and AC adaptor. Contact your technical support office for repair. n Do Not Connect the AC Adaptor to a Power Source Other Than a Standard Household AC Outlet Connecting to a DC/AC con-

verter (inverter) may damage the AC adaptor. On an airplane, only connect the AC adaptor/

charger to an AC outlet specifi-

cally approved for such use. 3 Read Me First Safety Precautions WARNING Fire or electric shock may result. n Do Not Pull or Insert the AC Plug If Your Hands Are Wet n Do Not Disassemble This Product No user serviceable parts inside this unit. Refer servicing to quali-

fied technician. n Do Not Touch This Product In a Thunderstorm If Connected with the AC Cable or Any Other Cables n If a Malfunction or Trouble Oc-

curs, Immediately Stop Use If the Following Malfunction Occurs, Immediately Unplug the AC Plug and the Battery Pack This product is damaged Foreign object inside this product Smoke emitted Unusual smell emitted Unusually hot After the above procedure, contact your technical support office for repair. n Clean Dust and Other Debris of the AC Plug Regularly If dust or other debris accumulates on the plug, humidity, etc. may cause a defect in the insulation. n Insert the AC Plug Completely Do not use a damaged plug or loose AC outlet. n Close the Connector Cover Tightly When Using This Prod-

uct Where Is a Lot of Water, Moisture, Steam, Dust, Oily Vapors, etc. If foreign matter has found its way inside, immediately turn the power off and unplug the AC cord, and then remove the battery pack. Then contact your technical support office. n Turn the Power off Beforehand when Entering Locations, Such as a Gas Station Where Inflam-

mable Gases Are Generated Such gases may be ignited. 4 Burns or low-temperature burns may result. n Do Not Use This Product in Close Contact With Your Body For a Long Period of Time Do not use this product with its heat-emitting parts in close con-

tact with your body for a long period of time. Low-temperature burns may result. n Do Not Expose Yourself or Other Persons to the Hot Wind from the Ventilation Hole (Exhaust) For a Long Period of Time Depending on the direction of the computer or the way you hold the computer, your hands and body will be more exposed to the hot wind. Covering the ventilation hole (ex-

haust) with your hand or other object can cause heat to build up inside, possibly resulting in burns. n Do Not Touch The Surface of The AC Adaptor Continuously While Using/Charging Burns may result. n Do Not Place the Product in a Bag or Case While It is Turned On Doing so may cause the product to overheat and result in burns. n Do Not Turn the Volume Up Too Loud When Using Headphones Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hearing.

<Only for model with wireless WAN>

n Do Not Leave a nanoSIM Card within Reach of Infants In case of swallowing, consult a doctor immediately. Detrimental health effects on your body may result. Read Me First WARNING Radio waves transmitted from this prod-

uct may affect the surrounding area. CAUTION Fire or electric shock may result. n Do Not Use This Product near Automatic Control Devices, Such As Automatic Doors And Fire Alarms Automatic control devices may malfunction, resulting in acci-

dents. n Turn the Power Off on an Air-

plane*1 For use on a plane, follow the airlines instructions. The safety of navigation may be compromised. n Turn the Power Off in Hospitals or at Locations Where Medical Equipment is Present *1 Do not bring this product into operating rooms, intensive care units, CCU, etc. *2 Medical electrical equipment may be affected, and malfunc-

tion may occur, resulting in ac-

cidents. n Turn the Power Off in Crowded Locations, Such As a Crowded Train, Where There May Be a Person with a Cardiac Pacemak-

er The operation of a pacemaker may be affected. n Keep This Product at Least 15 cm Away from the Position of an Implantable Pacemaker The operation of a pacemaker may be affected.

*1 If there is no choice but to use this product in such an environment, turn the wireless capa-

bility off. However, bear in mind that use of a computer may be prohibited during takeoff and landing of an aircraft, etc. even if the wireless capability is turned off.

*2 CCU is an abbreviated term of Coronary Care Unit. n Do Not Move This Product While the AC Plug Is Connected If the AC cord is damaged, un-

plug the AC plug immediately. n Do Not Connect a Telephone Line, or a Network Cable Other Than the One Specified, Into the LAN Port Do not connect to a network such as the ones listed below. Networks other than 1000BASE-T, 100BASE-TX or 10BASE-T Phone lines (IP phone (Internet Protocol Telephone), Telephone lines, internal phone lines (on-

premise switches), digital public phones, etc.) n Do Not Subject the AC Adaptor To Any Strong Impact Do not continue to use the AC adaptor after a strong impact such as being dropped. Contact your technical support office for repair. n Do Not Leave This Product in High Temperature Environment for a Long Period of Time Leaving this product where it will be exposed to extremely high temperatures such as near fire or in direct sunlight may deform the cabinet and/or cause trouble in the internal parts. n Do Not Block the Ventilation Hole (Exhaust/Intake) Do not use this product wrapped in cloth or on top of bedding or a blanket. 5 Read Me First NOTICE l Do not place the computer near a television or radio receiver. l Keep the computer away from magnets. Data stored on the flash memory may be lost. l This computer is not intended for the display of images for use in medical diagnosis. l This computer is not intended for a use with connection of medical equipment for the pur-

pose of medical diagnosis. l Panasonic shall not be liable for loss of data or other incidental or consequential damages resulting from the use of this product. l Do not touch the terminals on the battery pack. The battery pack may no longer function prop-

erly if the contacts are dirty or damaged. l Do not expose the battery pack to water, or allow it to become wet. l If the battery pack will not be used for a long period of time (a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40%

and store it in a cool, dry place. l This computer prevents overcharging of the battery by recharging only when the remaining power is less than approx. 95% of capacity. l The battery pack is not charged when the computer is first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automatically. l Should the battery leak and the fluid get into your eyes, do not rub your eyes. Immediately flush your eyes with clear water and see a doc-

tor for medical treatment as soon as possible. Safety Precautions CAUTION Fire or electric shock may result. n Hold the Plug When Unplugging the AC Plug n Use Only the Specified AC Adaptor With This Product Do not use an AC adaptor other than the one supplied (supplied with the unit or one sold sepa-

rately as an accessory). This product may fall over or drop, result-

ing in an injury. n Do Not Place This Product on Unstable Surfaces n Avoid Stacking n When Carrying the Computer, Attach the Tablet To the Key-

board Base Tightly Until Or-

ange-colored Signs Under the Detach Lock And Release Lever Are Concealed. Detrimental health effects on your body may result. n Take a Break Of 10-15 Minutes Every Hour Using this product for long peri-

ods of time may have detrimen-

tal health effects on the eyes or hands. Burns, low-temperature burns, or frost-

bite may result. n Do Not Expose the Skin To This Product When Using the Prod-

uct In A Hot Or Cold Environ-

ment When it is necessary to expose the skin to this product such as to scan a fingerprint, perform the operation in the shortest time possible. 6 Read Me First NOTE l The battery pack may become warm during recharging or normal use. This is completely normal. l Recharging will not commence if internal tem-

perature of the battery pack is outside of the allowable temperature range (0 C to 50 C

{32 F to 122 F}). (

Operating Instruc-

tions - Reference Manual Basic Operation Battery Power) Once the allowable range requirement is satisfied, charging begins auto-

matically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10 C {50 F} or below.) l If the temperature is low, the operating time is shortened. Only use the computer within the allowable temperature range. l The battery pack is a consumable item. If the amount of time the computer can be run by us-

ing a particular battery pack becomes dramati-

cally shorter and repeated recharging does not restore its performance, the battery pack should be replaced with a new one. l When transporting a spare battery inside a package, briefcase, etc., it is recommended that it be placed in a plastic bag so that its con-

tacts are protected. l Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity. l <Only for model with Built-in Bridge Battery>

To minimize deterioration of the built-in bridge battery, connect the computer to the AC adap-

tor and recharge it for approximately 2 hours about once every year. While we anticipate use of our products in cer-

tain environments such as nuclear equipment/

systems, air traffic control equipment/systems, aircraft equipment/systems (as defined in*3), medical devices or accessories (as defined in*4), medical treatment diagnosis image display, life-

support system, or other equipment/devices/

systems that are involved with ensuring human life or safety, we do not allow users to integrate our product such that it becomes an integral part of the systems found in these environments.

*3 Aircraft equipment/systems include Class2 Electric Flight Bag (EFB) systems are defined by FAA AC120-76D or EASA Commission Regulation (EU) No 965/2012.

*4 As defined by the Regulation (EU) 2017/745 Medical Device Regulation. Panasonic cannot guarantee any specifications, technologies, reliability, safety (e.g. flammability/

smoke/toxicity/radio frequency emission, etc.) requirement related to aviation standards that exceed the specifications of our COTS products. This computer is not intended for use in medical equipment including life-support systems, air traf-

fic control systems, or other equipment, devices or systems that are involved with ensuring human life or safety. Panasonic cannot be held responsible in any way for any damages or loss resulting from the use of this unit in these types of equipment, devices or systems, etc. As with any portable computer device precautions should be taken to avoid any damage. The follow-

ing usage and handling procedures are recom-

mended. Before putting the computer away, be sure to wipe off any moisture. 7 Read Me First Mesures de scurit Pour rduire tout risque de blessure, de dcs, dlectrocution, dincendie ou de dysfonctionne-

ment, respectez toujours les mesures de scurit suivantes. Explication des symboles Les symboles suivants sont utiliss pour classer et dcrire le degr de danger, de blessure et de dommages matriels causs si ces symboles sont ignors et le produit est utilis de manire inap-

proprie. DANGER Indique un danger potentiel qui pro-

voquera des blessures graves voire la mort. AVERTISSEMENT Indique un danger potentiel qui pourrait provoquer des blessures graves voire la mort. ATTENTION Indique un danger potentiel qui pourrait provoquer des blessures mineures. AVIS Indique un danger qui pourrait provo-

quer des dommages matriels. Les symboles suivants sont utiliss pour clas-

ser et dcrire le type dinstructions suivre. Ce symbole est utilis pour alerter les utilisateurs quune procdure dutilisation spcifique ne doit pas tre effectue. Ce symbole est utilis pour alerter les utilisateurs quune procdure dutilisation spcifique doit tre respecte de faon faire fonctionner lappareil en toute scurit. DANGER Prcautions relatives la batterie Des pertes dlectrolytes et une produc-

tion de chaleur sont possibles, la batterie risque galement de prendre feu ou de casser. n Ne pas jeter la batterie au feu et ne pas la soumettre une cha-

leur excessive n Ne pas dformer la batterie, ne pas la dmonter et ny apporter aucune modification n Ne pas mettre la borne positive

(+) en court-circuit avec la borne ngative (-) Ne pas mettre la batterie en con-

tact avec des objets tels que des colliers ou des pingles pendant le transport ou le stockage. n Ne pas soumettre le produit aux secousses ni aux chocs, ne pas le soumettre une pression excessive, etc. Si ce produit subit un choc vio-

lent, enlevez immdiatement le bloc de batterie de lordinateur. n Ne pas charger la batterie en appliquant des mthodes autres que celles indiques n Ne pas utiliser la batterie avec un autre produit La batterie est rechargeable et a t conue pour un produit sp-

cifique. n Ne pas utiliser ce produit avec une batterie autre que celle sp-

cifie Nutiliser que la batterie spci-

fie avec le produit. n viter les chaleurs extrmes

(proximit dun feu, lumire di-

recte du soleil, par exemple) n Quand le bloc de batterie est dtrior ou si un gonflement anormal se produit, le remplacer avec un bloc neuf Ne pas continuer utiliser une batterie endommage. 8 Read Me First DANGER AVERTISSEMENT Prcautions relatives la batterie Des pertes dlectrolytes et une production de chaleur sont possibles, la batterie risque galement de prendre feu ou de casser. n Si un dysfonctionnement ou

<Uniquement pour les modles avec batterie relais intgre>

La batterie relais intgre risque de pro-

duire de la chaleur, de prendre feu ou de casser. un problme se produit, cesser immdiatement lutilisation Si le bloc de batterie apparait endommag ou dform, ou sil met de la fume, une odeur an-

ormale, une chaleur excessive ou dautres anomalies, retirez-le immdiatement de lordinateur. DANGER Prcautions pour la batterie relais intgre (pour llimination)

<Uniquement pour les modles avec bat-

terie relais intgre>

Lors de la mise au rebut de la batterie relais intgre, celle-ci risque de produire de la chaleur, de prendre feu ou de casser. Manipulation de lordinateur n Ne pas dmonter lordinateur sauf lors de la mise au rebut Manipulation de la batterie relais intgre n Ne pas mettre la borne positive

(+) en court-circuit avec la borne ngative (-) n Ne pas jeter la batterie au feu et ne pas la soumettre une cha-

leur excessive n Ne pas soumettre la batterie relais intgre aux secousses ni aux chocs, ne pas la soumettre une pression excessive, etc. n Ne pas recharger n Ne pas utiliser n Ne pas dformer la batterie re-

lais intgre, ne pas la dmonter et ny apporter aucune modifica-

tion n viter les chaleurs extrmes

(proximit dun feu, lumire di-

recte du soleil, par exemple) n Ne pas jeter ce produit au feu et ne pas le soumettre une chal-

eur excessive n Ne pas dformer ce produit, ne pas le dmonter et ny apporter aucune modification n Ne pas soumettre le produit aux secousses ni aux chocs, ne pas le soumettre une pression ex-

cessive, etc. n Ne pas charger la batterie en appliquant des mthodes autres que celles indiques n viter les chaleurs extrmes

(proximit dun feu, lumire di-

recte du soleil, par exemple) n Lorsque la batterie relais int-

gre est dtriore ou si elle pr-

sente un gonflement anormal, contacter le service de support technique afin de la remplacer 9 Read Me First Mesures de scurit AVERTISSEMENT Un incendie ou un choc lectrique risque de se produire. n Ne rien faire qui puisse endom-

mager le cordon secteur, la fiche dalimentation ou ladaptateur secteur Ne pas endommager ni modifier le cordon, ne pas le placer prs doutils chauds, ne pas plier, tordre ou tirer avec force, ne pas placer dobjets lourds sur ce dernier ni le serrer fermement. Ne pas continuer utiliser un cordon dalimentation, une fiche dalimentation et un adaptateur secteur endommags. Contacter lassistance technique pour faire rparer le produit. n Ne pas brancher ladaptateur secteur une source dalimen-

tation autre quune prise secteur domestique standard Ladaptateur secteur risque dtre endommag sil est connect un convertisseur C.C./C.A. (inverseur). En avion, ne brancher ladaptateur sec-

teur/chargeur que sur une prise secteur spcifiquement adapte un tel usage. n Ne pas insrer ni retirer la fiche C.A. les mains mouilles n Ne pas dmonter ce produit Lappareil ne contient pas de pices pouvant tre rpares par lutilisateur. Contactez un tech-

nicien qualifi pour des rpara-

tions. n Ne pas toucher ce produit en cas dorage sil est branch au cble dalimentation ou nim-

porte quel autre cble Un incendie ou un choc lectrique risque de se produire. n En cas de dysfonctionnement ou de panne, arrter immdiate-

ment lutilisation Si le dysfonctionnement suivant se produit, dbrancher immdia-

tement la fiche dalimentation (et la batterie) Ce produit est endommag Prsence de corps trangers dans ce produit mission de fume mission dune odeur inhabituelle Dgagement de chaleur inha-

bituelle Aprs la procdure ci-dessus, contacter lassistance technique pour faire rparer le produit. n liminer rgulirement la pous-

sire et dautres rsidus de la fiche C.A. Si de la poussire ou dautres rsidus saccumulent sur la fiche, si celle-ci est humide, par exemple, cela pourrait entraner une dfaillance de lisolation. n Insrer compltement la fiche C.A Ne pas utiliser de fiche endomma-

ge ni de prise secteur dtache. n Fermer le couvercle du connec-

teur fermement lors de lutili-

sation de ce produit dans un endroit o la prsence deau, dhumidit, de vapeur, de pous-

sire, de vapeurs dhuile, etc. est importante. Si un corps tranger a pntr dans ce produit, mettre immdi-

atement celui-ci hors tension et dconnecter le cordon secteur. puis retirer la batterie. Contactez ensuite lassistance technique. n Mettez lappareil hors tension avant dentrer dans des lieux, tels quune station service o des gaz inflammables sont pro-

duits De tels gaz risqueraient de sen-

flammer. 10 Read Me First AVERTISSEMENT Cela peut entraner des effets nfastes sur votre sant. Il peut sen suivre des brlures ou des brlures basse temprature. n Ne pas monter le volume trop fort lors de lutilisation du casque Lcoute des niveaux sonores levs qui stimulent loreille de manire excessive pendant une priode prolonge peut se tra-

duire par une perte daudition.

<Uniquement pour les modles WAN sans fil>

n Ne laissez pas les cartes na-

no-SIM porte des nourrissons En cas dingestion, consultez immdiatement un docteur. Les ondes radio mises par cet appareil peuvent affecter la zone environnante. n Nutilisez pas cet appareil proximit de dispositifs de contrle automatiques, comme des portes automatiques et des alarmes incendie Les dispositifs de contrle auto-

matiques risquent de mal fonc-

tionner et provoquer des acci-

dents. n Ne pas utiliser ce produit prs du corps pendant une priode prolonge Ne pas exposer votre corps au contact direct de la source de chaleur de ce produit pendant une priode prolonge. Il peut sen suivre des brlures basse temprature. n Ne pas vous exposer, ou expo-

ser dautres personnes, lair chaud mis par le trou de ven-

tilation (chappement) pendant une priode prolonge. Selon la direction de lordinateur ou la manire dont vous le tenez, vos mains et votre corps seront davantage exposs au vent chaud. Couvrir le trou de ventilation

(chappement) avec votre main ou tout autre objet peut causer une accumulation de chaleur lintrieur et risque dentraner des brlures. n Ne pas toucher la surface de ladaptateur secteur pendant lutilisation/le chargement Il peut sen suivre des brlures. n Ne pas placer le produit dans un sac ou un botier lorsquil est allum Cela risquerait de faire surchauf-

fer lappareil et de causer des brlures. 11 Read Me First Mesures de scurit AVERTISSEMENT Les ondes radio mises par cet appareil peuvent affecter la zone environnante. ATTENTION Un incendie ou un choc lectrique risque de se produire. n Mettez lappareil hors tension bord dun avion *1 En cas dutilisation bord dun avion, conformez-vous au rgle-

ment de la compagnie arienne. La scurit de navigation pourrait tre compromise. n Mettez lappareil hors tension dans des hpitaux ou dans des endroits avec de lquipement mdical prsent *1 Namenez pas cet appareil dans les salles dopration, les uni-

ts de soins intensifs, les CCU, etc. *2 Les quipements lectriques mdicaux risqueraient dtre affects et connaitre des dys-

fonctionnements, provoquant des accidents. n Mettez lappareil hors tension dans les endroits avec beau-

coup de monde, comme les trains bonds, o une personne portant un stimulateur cardiaque peut se trouver Le fonctionnement dun stimula-

teur pourrait tre affect. n Maintenez cet appareil haut moins 15 cm de la position dun stimulateur implantable Le fonctionnement dun stimula-

teur pourrait tre affect.

*1 Sil est impratif dutiliser lappareil dans un tel environnement, dsactivez la fonction sans fil. Cependant, notez que lutilisation dun ordina-

teur peut tre interdite pendant le dcollage et latterrissage dun avion, etc. mme si la fonction sans fil est dsactive.

*2 CCU est un terme abrg pour unit de soins intensifs de cardiologie. 12 n Ne pas dplacer ce produit tant que la fiche C.A. est connecte Si le cordon secteur est endom-

mag, dconnecter immdiate-

ment la fiche C.A. n Ne pas brancher de ligne tl-

phonique ni de cble rseau autres que ceux spcifis, dans le port pour rseau local Ne pas connecter un rseau comme lun de ceux rpertoris ci-dessous. Rseaux autres que 1000BASE-T, 100BASE-TX ou 10BASE-T Lignes tlphoniques (tlphone IP (tlphone protocole Inter-

net), lignes tlphoniques, lignes internes (commutateurs tlpho-

niques prsents chez labonn), tlphones publics numriques, etc.) n Ne soumettre ladaptateur sec-

teur aucun choc violent Ne pas poursuivre lutilisation de ladaptateur secteur aprs un choc violent comme, par exem-

ple, une chute. Contacter lassistance technique pour faire rparer le produit. n Ne pas laisser ce produit dans un environnement temprature leve pendant une priode pro-

longe Laisser ce produit dans un en-

droit o il sera expos des tem-

pratures extrmement leves, comme prs du feu ou la lu-

mire directe du soleil, risque de dformer le botier et/ou den-

dommager les lments internes. n Ne pas obstruer lorifice de ventilation (chappement/aspira-

tion) Ne pas utiliser ce produit enroul dans un tissu ou sur une literie ou un canap. Read Me First AVIS l Ne pas placer lordinateur prs dune tlvision ou dun rcepteur radio. l Tenir lordinateur lcart des aimants. Des donnes du disque dur pourraient tre per-

dues. l Cet ordinateur nest pas prvu pour laffichage dimages des fins de diagnostic mdical. l Cet ordinateur nest pas prvu pour une connexion un quipement mdical des fins de diagnostic mdical. l Panasonic ne pourra tre tenu responsable de perte de donnes ou de tout autre dommage accessoire ou indirect rsultant de lutilisation de ce produit. l Ne pas toucher les bornes de la batterie. La batterie risque de ne plus fonctionner correc-

tement si les bornes sont sales ou endomma-

ges. l Ne pas exposer la batterie leau et viter quelle soit mouille. l Si vous nutilisez pas la batterie pendant une priode prolonge (un mois ou plus), la char-

ger ou la dcharger (lutiliser) jusqu ce que son niveau de charge se situe entre 30 % et 40 % de sa capacit maximale, puis la ranger dans un endroit frais et sec. l Cet ordinateur protge la batterie contre une ventuelle surcharge en ne dclenchant son rechargement que lorsque sa charge est in-

frieure 95 % environ de sa capacit maxi-

male. l lachat de lordinateur, la batterie nest pas charge. La charger avant dutiliser votre ordi-

nateur pour la premire fois. Lorsque ladap-

tateur secteur est branch sur lordinateur, la charge dmarre automatiquement. l En cas de contact du liquide de la batterie avec les yeux, ne pas les frotter. Les rincer immdiatement avec de leau et consulter un mdecin. ATTENTION Un incendie ou un choc lectrique risque de se produire. n Tenir fermement la fiche C.A. lors de son retrait n Nutiliser que ladaptateur sec-

teur spcifi pour ce produit Ne pas utiliser un adaptateur secteur autre que celui fourni

(Nutiliser que ladaptateur secteur spcifi pour ce produit). Ce produit risque de tomber et dentraner des blessures. n Ne pas placer ce produit sur des surfaces instables n viter tout empilage n Lorsque vous transportez lor-

dinateur, fixez fermement la Tablette sur la base du clavier jusqu ce que les signes de couleur orange en dessous du verrou de sparation et du levier de dgagement soient dissimu-

ls Cela peut entraner des effets nfastes sur votre sant. n Faire une pause de 10 15 mi-

nutes par heure Utiliser ce produit pendant une priode prolonge peut tre n-

faste pour les yeux ou les mains. Des brlures, des brlures basse tem-

prature ou des gelures pourraient tre causes. n Ne pas toucher ce produit lors de son utilisation dans un envi-

ronnement chaud ou froid. Lorsquil est ncessaire dexposer la peau ce produit comme pour scanner une em-

preinte digitale, veuillez effectuer lopration le plus rapidement possible. 13 Read Me First Mesures de scurit REMARQUE l La batterie peut chauffer pendant la charge ou lutilisation normale. Il sagit dun phnomne tout fait normal. l La charge ne peut commencer si la tempra-

ture interne de la batterie excde la plage de tempratures acceptable (0 C 50 C).

( Operating Instructions - Reference Manual Basic Operation Battery Power) La charge commence automatiquement lorsque la temprature revient dans les limites auto-

rises. Il est important de noter que le temps de charge varie en fonction des conditions dutilisation. (Le temps de charge est plus long que dhabitude lorsque la temprature est inf-

rieure ou gale 10 C.) l Lorsque la temprature est basse, lautonomie est diminue. Nutiliser lordinateur que dans la plage de tempratures autorise. l La batterie est un produit consommable. Si le temps dutilisation de la batterie est consi-

drablement rduit et si ses performances ne samliorent pas lorsquelle est recharge plusieurs reprises, la remplacer par une nou-

velle batterie. l Lors du transport dune batterie de rechange dans un bagage, une valise, etc., nous recom-

mandons de la placer dans un sac en plastique afin den protger les bornes. l Toujours mettre lordinateur hors tension sil nest pas utilis. Si lordinateur est laiss sous tension alors que ladaptateur secteur nest pas branch, la batterie risque de se dchar-

ger compltement. l <Uniquement pour les modles avec batterie relais intgre>

Pour rduire au minimum la dtrioration de la batterie relais intgre, reliez lordinateur ladaptateur secteur et rechargez-le pendant environ 2 heures une fois par an. Bien que nous anticipions lutilisation de nos produits dans certains environnements tels que les systmes/quipements nuclaires, systmes/

quipements de contrle du trafic arien ou systmes/quipements davions (comme dfini dans*3), dispositifs ou accessoires mdicaux

(comme dfini dans*4), affichages dimages de diagnostic pour traitement mdical, systmes dassistance de vie artificielle ou tout autre quipement/dispositif/systme li la vie ou la scurit humaine, nous nautorisons pas les utilisateurs intgrer nos produits de telle sorte quils fassent partie intgrante des systmes trouvs dans ces environnements.

*3 Les systmes/quipements davion incluent les systmes Sac de vol lectronique (EFB) sont dfinis par lAA AC120-76D ou le R-

glement de la Commission de lAESA (UE) N 965/2012.

*4 Comme prescrit par la Rglement (UE) 2017/745 concernant les dispositifs mdi-

caux. Panasonic ne donne aucune garantie en ce qui concerne les spcifications, les technologies, la fiabilit et la scurit (par exemple, linflammabili-

t, la fume, la toxicit, lmission de frquences radio, etc.) relatives aux normes de laviation qui ont dpassent les spcifications de nos produits produits COTS. Cet ordinateur nest pas destin un usage m-

dical, notamment dans des systmes de maintien des fonctions vitales, les systmes de contrle des voies respiratoires ou tout autre quipement, dispositif ou systme qui assure le maintien de la vie humaine ou la scurit. Panasonic ne peut pas tre tenu responsable pour tout dommage ou perte rsultant de lutilisation de cet appareil avec ces types dquipement, de dispositif ou de systme. Comme avec tout ordinateur portable des pr-

cautions doivent tre prises pour viter tout dom-

mage. Les procdures dutilisation et de transport suivantes sont recommandes. Avant de ranger lordinateur, veiller essuyer toute trace dhumidit. 14 Read Me First Regulatory Information / Informations rglementaires Information to the User / Informations destines aux utilisateurs

<Only for model with wireless LAN/Bluetooth>

This product and your Health This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless de-

vices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recom-

mendations, we believe this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the build-

ing or responsible representatives of the organization. These situations may for example include:

l Using this product on board of airplanes, or l In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interference caused by unauthorized modification of this prod-

uct. The correction of interference caused by such unauthorized modification will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. 26-M-1

<Uniquement les modles avec rseau local sans fil et/ou Bluetooth>

Ce produit et votre sant Ce produit, comme tout autre appareil radio, met de lnergie radiolectrique. Toutefois, la quantit dnergie mise par ce produit est beaucoup moins importante que lnergie radiolectrique mise par des appareils sans fil tels que les tlphones portables. Lutilisation de ce produit ne comporte aucun risque pour le consommateur du fait que cet appareil opre dans les limites des directives concernant les normes et les recommandations de scurit sur les frquences radio. Ces normes et recommandations refltent le consensus de la communaut scientifique et rsultent de dlibrations de jurys et comits de scientifiques qui examinent et interprtent continuellement les nouveauts de la vaste littrature sur les recherches effectues. Dans certaines situations ou environnements, lutilisation de ce produit peut tre restreinte par le propritaire du btiment ou par les reprsentants responsables de lorganisation. Ces situations peuvent tre les suivantes par exemple :

l A bord dun avion, ou l Dans tout autre environnement o les risques dinterfrence sur dautres appareils ou services sont perus ou identifiables comme dangereux. Si vous ntes pas sr de la rglementation applicable lutilisation dappareils sans fil dans une organi-

sation ou un environnement spcifique, (par exemple dans un aroport) nous vous invitons demander lautorisation dutiliser ce produit avant sa mise en marche. Informations concernant la rglementation Nous dclinons toute responsabilit pour toute interfrence radio ou tlvision cause par des modifica-

tions non autorises apportes ce produit. La correction dinterfrences causes par de telles modifica-

tions non autorises sera la seule responsabilit de son utilisateur. Nousmmes, les revendeurs officiels et les distributeurs ne sommes pas responsable de tout dgt ou de toute violation des rglements de ltat pouvant dcouler du non-respect de ces directives. 26-F-1 15 Read Me First Regulatory Information / Informations rglementaires 57-E-1 57-F-1 Camera Light / Lumire de la camra

<For model with rear camera>

<For model with Barcode Reader>

CAUTION

- The light from the LED is strong and can injure human eyes. Do not look directly at the LEDs with naked eyes.

- Possibly hazardous optical radiation emitted from this camera LED light. Do not stare at operating camera in less than @@ mm distance. Otherwise may be harmful to the eyes.

<Pour les modles munis dune camra arrire>

<Pour les modles quips dun Lecteur de codes barres>

ATTENTION

- La lumire de la diode LED est forte et peut blesser loeil humain. Ne regardez pas directement les LED avec les yeux non protgs.

- Possibles radiations optiques dangereuses mise par la lumire de la LED de cette camra. Ne regardez pas dans la camra en fonctionnement moins de @@ mm de distance. Vous risqueriez vous blesser les yeux. USB Type-C Adaptors and Cables / Cbles et adaptateurs USB type C For USA/CANADA:

- Use only UL Listed USB Type-C AC adaptors.

- Use only UL Listed USB Type-C cables (ICT Power Cables). Pour -U/CANADA :

- Utilisez uniquement des adaptateurs secteur Type C USB homologus UL.

- Utilisez uniquement des adaptateurs Type C USB homologus UL (cbles dalimentation ICT). Laser Devices / Priphriques laser

<Only for model with Rear Camera>

CAUTION!

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

<Uniquement pour les modles avec camra arrire>

AVERTISSEMENT!

CET APPAREIL UTILISE UN LASER. LUTILISATION DE COMMANDES OU DE RGLAGES OU LEXCUTION DE PROCDURES AUTRES QUE CELLES SPCIFIES ICI PEUVENT PROVOQUER UNE EXPOSITION DES RADIATIONS DAN-

GEREUSES. NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RPARER SOIMME. CONFIER TOUT TRAVAIL DENTRETIEN UN PERSONNEL QUALIFI. 12-E-1 12-F-1 The following label is put on the rear side of the computer. Ltiquette suivante est appose larrire de lordinateur. 16 Read Me First<Only for model with Barcode Reader>

This equipment is using lasers that comply with 21 CFR 1040.10, 1040.11, except for deviations pursuant to Laser Notice No.50, dated June 24, 2007 regulations. The laser is a Class 2 laser which is indicated on the label for this product. Class 2 laser readers use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. Caution-Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. n Labeling/Marking Location of aperture @@

Beam Divergence

- Vertical angle: 30 degree

- Horizontal angle: 36 degree 650 nm, 1 mW MAX, 16.8 ms

<Uniquement pour les modles quips dun Lecteur de codes barres>

Cet appareil utilise des rayons laser conformes aux rglements 21 CFR 1040.10, 1040.11, sauf les excep-

tions cites dans le document Laser Notice N 50 du 24 juin 2007. Le laser est de Classe 2, comme ltiquette de ce produit lindique. Les lecteurs de laser de Classe 2 utilisent une diode lumineuse rayonnement visible et basse nergie. Comme cest le cas pour toutes les sources trs lumineuses, comme le soleil, il est recommand lutilisateur dviter de regarder directe-

ment le faisceau. Une exposition momentane un laser de Classe 2 nest pas reconnue comme nocive. Attention-Les procdures autres que celles qui sont dtermines ici peuvent entraner une exposition des radiations dangereuses. 13-E-1 n tiquettes/marques Emplacement de louverture @@

Divergence du faisceau

- Angle vertical : 30 degrs

- Angle horizontal : 36 degrs 650 nm, 1 mW MAX, 16,8 ms Installation in Vehicle / Installation dans un vhicule This unit is to be installed by a qualified installation professional only. Cet appareil doit tre install par un installateur professionnel qualifi. 13-F-1 61-M-1 61-F-1 17 Read Me First Regulatory Information / Informations rglementaires Lithium Battery / Pile au lithium Lithium Battery!

This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel. Warning!

A risk of explosion from incorrect installation or misapplication may possibly occur. Handling of lithium battery pack Do not charge, use, or leave the battery in extremely high temperature or extremely low air pres-

sure like high altitude where ordinary not entered, as this may result in explosion or leakage of flammable liquids. Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines donnes, notam-

ment la date et lheure. La pile ne doit tre remplace que par un technicien qualifi. Danger! Risque dexplosion en cas de non respect de cette mise en garde!

Manipulation de la batterie au lithium Ne pas charger, utiliser ou laisser la batterie dans un endroit soumis une temprature extrme-

ment leve ou une pression dair extrmement basse, comme haute altitude, l o elle nest pas habituellement utilise, car cela peut entraner une explosion ou une fuite de liquides inflam-

mables. Battery Pack / Batterie CAUTION:

Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions. ATTENTION:

Il y a risque dexplosion si la batterie est remplace par une batterie de type incorrect. Mettre au rebut les batteries usages conformment aux instructions. 15-E-1 15-F-1 58-E-1 58-F-1 FZ-VZSU1TU Battery pack model number Recommended charging condition Notice FZ-VZSU1UU FZ-VZSU1VU 12.6 V / 3150 mA

(Constant voltage/current) 13.05 V / 3052 mA

(Constant voltage/current) l Dispose of used battery pack according to local ordinances and/or regulations. l Do not expose this computer to temperatures greater than 60C {140F}. l Charging Limit Voltage:

l Charging Limit Voltage:

13.05 V: 0 - 45 C (Charging start temperature: 2 C and over) 12.6 V: 45 - 60 C 12.6 V: 0 - 45 C (Charging start temperature: 2 C and over) 12.15 V: 45 - 60 C Numro de modle du bloc de batterie Conditions de re-

charge recomman-

des FZ-VZSU1TU FZ-VZSU1UU FZ-VZSU1VU 13.05 V / 3052 mA

(Tension/courant constant) 12.6 V / 3150 mA

(Tension/courant constant) Avis l Mettez le bloc utilis au rebut selon les ordonnances et/ou rglements locaux en vigueur. l Nexposez pas cet ordinateur des tempratures suprieures 60 C. l Tension de recharge limite :

l Tension de recharge limite :

13,05 V : 0 - 45 C (Temprature de recharge au dmarrage : 2 C et plus) 12,6 V : 45 - 60 C 12,6 V : 0 - 45 C (Temprature de recharge au dmarrage : 2 C et plus) 12,15 V : 45 - 60 C 18 Read Me First Energy Star

<Only for model with the above logo on the computer>

As an ENERGY STAR Partner, Panasonic Corporation has determined that this product meets ENERGY STAR guidelines for energy efficiency. By enabling available power management settings, Panasonic computers enter a low-power sleep mode after a period of inactivity, saving the user energy.

<For U.S.A.>

To learn more about power management, please visit the web site:

www.energystar.gov Outline of the International ENERGY STAR Office Equipment Program The international ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the develop-

ment and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations.

<For U.S.A.>

For information about ENERGY STAR, refer to the following web site:

Web Site: www.energystar.gov

<Only for model without the above logo on the computer>

This model is not certified to the ENERGY STAR. 22-M-2

<Uniquement pour le modle muni du logo ci-dessus sur lordinateur>

Partenaire ENERGY STAR, Panasonic Corporation propose des produits conformes aux recommanda-

tions ENERGY STAR pour la gestion de lnergie. Par lactivation des rglages de gestion de consomma-

tion dnergie disponibles, les ordinateurs Panasonic pas-sent en mode de veille faible consommation dnergie aprs une certaine priode dinactivit, procurant ainsi des conomies dnergie lutilisateur. Prsentation du programme ENERGY STAR international en matire dquipements de bureau-

tique Ce programme international a pour objectif de normaliser les fonctions dconomie dnergie pour les or-

dinateurs et les quipements de bureau. Il soutient le dveloppement et la diffusion de produits proposant des fonctions permettant une gestion efficace de lnergie. Cest un systme ouvert auquel les entreprises peuvent librement participer. Les produits cible sont des quipements de bureau tels que les ordinateurs, moniteurs, imprimantes, tlcopieurs et photocopieurs. Les standards dfinis et les logos utiliss sont identiques dans tous les pays participants.

<Uniquement pour le modle ntant pas muni du logo ci-dessus sur lordinateur>

Ce modle nest pas certifi ENERGY STAR. 22-F-2 19 Read Me First Regulatory Information / Informations rglementaires For U.S.A. / Pour les tats-Unis Federal Communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

l Reorient or relocate the receiving antenna. l Increase the separation between the equipment and receiver. l Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. l Consult the Panasonic Service Center or an experienced radio/TV technician for help. Warning To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compli-

ance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. FCC RF Exposure Warning:

l Other third-party wireless transmitters have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.

<Only for model with wireless LAN/wireless WAN/Bluetooth>

l This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. l This equipment may not be collocated or operated with any other antenna or transmitter. l This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio fre-

quency (RF) energy set by the Federal Communications Commission of the U.S. Government. l The exposure standard for wireless device employs a unit of measurement known as the Specific Ab-

sorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.

* Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Responsible Party: Panasonic Corporation of North America Two Riverfront Plaza Newark, NJ 07102 https://na.panasonic.com/us/support Support Contact:

25-M-9 6-M-1 20 Read Me First About FCC ID Number SAR information on this product is on file with the FCC and can be found by searching for the products FCC ID Number at https://www.fcc.gov/oet/ea/fccid. To find the FCC ID number for your product, first remove the battery pack from the tablet. The FCC ID number is printed on the nameplate (A) shown at right. USA Only: Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website:

https://www.panasonic.com/us/corporate/sustainability.html or call 1-888-769-0149

<US & Canada Only>

A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.

<.-U. et Canada seulement>

Lappareil que vous vous tes procur est aliment par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY. For Used in Motor Vehicle / Pour Lutilisation Dans Un Vhicule Motoris Warning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if used to support vehicle related functions such as vehicle information, system control, rear or side observation and navigation. If used for entertainment purpose, such as television reception or video play, it must be installed to the rear of the drivers seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Check with individual state/provincial laws to determine lawful use of this product while operating within a motor vehicle. Avertissement : Lordinateur bloc-notes peut tre install dans un vhicule motoris et dans le champ de vision du conducteur uniquement en tant que dispositif daide aux fonctions du vhicule, comme par exem-

ple pour fournir des informations sur le vhicule, comme dispositif de contrle de systme, pour lobservation larrire ou sur les cts du vhicule, ainsi que pour fournir de linformation routire. Pour toute utilisation fin de divertissement, comme par exemple pour regarder la tlvision ou jouer des jeux vido, il doit tre install larrire du sige du conducteur, en un emplacement o il ne sera pas visible, ni directement ni indirectement, pour le conducteur du vhicule motoris. Vrifiez les lois fdrales et nationales qui rgis-

sent lutilisation lgale de cet appareil lintrieur dun vhicule motoris. This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material -

special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/

A 65-M-2 48-M-1 35-M-1 38-M-1 21 Read Me First Regulatory Information / Informations rglementaires For Canada / Pour le Canada Canadian ICES-003 CAN ICES-3(B)/NMB-3(B)

<Only for model with wireless LAN/Bluetooth>

ISED Canada This product complies with ISED Canadas licence-exempt RSSs. Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. 7-M-2

<Ne sapplique quaux modes avec technologie Bluetooth/LAN sans fil/WAN sans fil>

ISED Canada Cet quipement est conforme aux normes sans licence RSS dISED Canada. Son fonctionnement est soumis aux deux conditions suivantes :

(1) ce dispositif ne peut produire de brouillage, et

(2) ce dispositif doit accepter le brouillage, y compris le brouillage pouvant entraner le fonctionnement non dsir de lappareil. 30-Ca-1-1

<Only for model with wireless LAN>

This product (local network devices) for the band 5150-5250 MHz is only indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LELAN devices.

<Ne sapplique quaux modles une utilization avec technologie LAN sans fil>

Cet appareil (pour rseaux locaux radiolectriques) dans les bandes de frquences 5150-5250 MHz est rserv une utilization lintrieur afin de rduire le risque dinterfrence avec les systmes satellites mobiles bicanaux. Les radars forte puissance sont dsigns comme tant les premiers utilisateurs (cest-dire quils ont la priorit) des bandes de frquences 5250-5350 MHz et 5650-5850 MHz. Ces stations radars peuvent pro-

voquer des interfrences et/ou des dommages ce priphrique. 30-Ca-2-1 22 Read Me First<Only for model with wireless LAN/wireless WAN/Bluetooth>

l This computer complies with ISED Canada radiation exposure limits set forth for an uncontrolled envi-

ronment. l This PC with WLAN and/or Bluetooth transmitters installed, has been approved for portable operation and does not require any minimum spacing be provided between antennas and all persons body.

<Ne sapplique quaux modles avec technologie Bluetooth/LAN sans fil/WAN sans fil>

l Cet quipement est conforme aux limites dexposition aux rayonnements ISED Canada tablies pour un environnement non contrl. l Ce PC avec metteurs WLAN et/ou Bluetooth a t approuv des fins dopration mobile ; aucun espace minimum entre les antennes et le corps de lutilisateur nest requis. FOR USE WITH MODEL NO. : CF-AA5713A POUR UTILISER AVEC MODLE : CF-AA5713A 20-Ca-1 23 Read Me First Regulatory Information / Informations rglementaires CE marking

<Only for model with a CE mark on the bottom of the computer>

Declaration of Conformity (DoC) Hereby, Panasonic declares that this computer is in compliance with the essential requirements and other relevant provisions of EU Council Directives Hint:

If you want to get a copy of the original DoC of our above mentioned products, please contact our web ad-

dress: https://www.ptc.panasonic.eu/

Authorised Representative:

Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems 18-E-1 These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general house-

hold waste. For proper treatment, recovery and recycling of old products and batteries, please take them to applicable collection points, in accordance with your national legislation. By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment. For more information about collection and recycling, please contact your local municipality. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. Note for the battery symbol (bottom symbol) This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. 36-E-1 For Australia For Used in Motor Vehicle Warning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if used to support vehicle related functions such as vehicle information, system control, rear or side observation and navigation. If the Notebook Computer is to be used for work or entertainment purposes, such as television reception, video play or other work programs, it must be installed in a position where it will NOT:

(a) be visible, directly or indirectly, to the operator of the motor vehicle; or

(b) cause distraction to drivers of other motor vehicles. Check with individual state laws to determine lawful use of this product while operating within a motor ve-

hicle. If the visual display unit is, or is part of, a drivers aid, above rule is not applied. Drivers aid includes closed-circuit television security cameras, dispatch systems, navigational or intelligent highway and vehicle system equipment, rear view screens, ticket-issuing machines and vehicle monitoring devices. 35-A-1 24 Read Me First For India Declaration of Conformity with the requirements of the E-Waste (Management) Rules The Product is in conformity with the requirements of the reduction of hazardous substances of the E-

Waste Rules. The content of hazardous substance with the exemption of the applications listed in SCHEDULE II of the E-waste Rules:

1. Lead (Pb) - not over 0.1% by weight;

2. Cadmium (Cd) - not over 0.01% by weight;

3. Mercury (Hg) - not over 0.1% by weight;

4. Hexavalent chromium (Cr6+) - not over 0.1% by weight;

5. Polybrominated biphenyls (PBBs) - not over 0.1% by weight;

6. Polybrominated diphenyl ethers (PBDEs) - not over 0.1% by weight. For the purpose of recycling to facilitate effective utilization of resources, please return this product to a nearby authorized collection center, registered dismantler or recycler, or Panasonic service center when disposing of this product. Please see the Panasonic website for further information on collection centers, etc. , or call the toll-free number below. Website:

https://www.panasonic.com/in/corporate/sustainability/panasonic-india-i-recycle-program.html Service helpline: 1800 103 1333 or 1800 108 1333 Dos & Donts: - E-Waste (Management ) Amendment Rules 2018 S.No. Dos 1 All electrical and electronic products are required to be handed over only to the Authorized recycler. 2 The product should be handed over only to autho-

rized recycler for disposal. 3 Keep the product in isolated area, after it be-

comes non-functional/un-repairable so as to prevent its accidental breakage. For more information about collection and recy-

cling, please contact your local municipality. 5 Always Dispose products that have reached 4 end-of life at Panasonic India authorized service center. 6 Wherever possible or as instructed, separate the packaging material according to responsible waste disposal options and sorting for recycling. Donts The product should not be opened by the User himself/herself, but only by authorized service personnel. The product is not meant for re-sale any unau-

thorized agencies/scrap dealer/kabariwalahs. The product is not meant for mixing into house-

hold waste stream. Do not keep any replaced spare part(s) from the product in exposed area. Do not donate old electronic items to anybody. Do not give e-waste to informal and unorganized sectors like Local Scrap Dealer/Rag Pickers. along with municipal waste that ultimately reach-

es landfill. 68-M-3 7 Create environment awareness PAN India Level. Do not dispose your product in garbage bins 25 Read Me First Before Turning on the Computer Refer to the following URL for how to attach options to the Expansion bays. Confirm the part numbers of the optional items before connection. https://askpc.panasonic.co.jp/manual/option/w/

Expansion Bays Top Expansion Bay Rear Expansion Bay IMPORTANT l If the above options are not attached, be sure to attach a dummy pack or cover before using. 26 Getting Started First-time Operation n Preparation A Check and identify the supplied accessories. If you do not find the described accessories, contact your support office. AC Adaptor . 1 AC Cord . 1 Battery Pack*1 . 1 Model No: FZ-VZSU1TU Model No: CF-AA5713A Soft Cloth . 1 Tether . 1 Digitizer pen*1 . 1 Hand Strap*2 . 1 OPERATING INSTRUCTIONS - Read Me First (This book) . 1 Depending on the model, the following items are supplied. Keyboard Base . 1 The keyboard base is attached to the tablet at the time of packing.

*1 Stored in the tablet at the time of packing.

*2 Not included with some models. n Latest Information on Windows 10 When Microsoft Windows 10 is updated, the screen display or operation procedures may be changed. For the latest information on Windows 10, see the following web page. https://pc-dl.panasonic.co.jp/itn/addendum/

27 Getting Started First-time Operation 1 2 2 A B 1 Inserting the Battery Pack 1 A Turn over the computer and insert the battery pack. B Slide the lock latch (A) to the locked position. l Make sure no foreign objects are under the computer. IMPORTANT l Make sure the latch is securely locked. Otherwise the battery pack may fall when you carry the computer. l Do not touch the terminals of the battery pack and the com-

puter. Doing so can make the terminals dirty or damaged, and may cause malfunction of the battery pack and the computer. 2 Use the tether to attach the pen (included) to the computer Use the tether to attach the pen (included) to the computer so you will not lose it. Remove the pen from the computer, and then perform the following steps to attach the tether to the pen (A and B) and the computer (C and D). A Pass one of the loops through the hole. B Pass one of the loops through another loop. C Thread the second loop on the tether through the hole (B) as illustrated. D Pass the pen and tether through the second loop. 1 3 2 4 IMPORTANT l Do not pull the tether with excessive force. The stylus may hit the computer, persons body or other objects when re-

leased. 28 Getting Started 3 Connect your computer to a power outlet A Connect the power cord and AC adaptor. Hold the plug (C) of the power cord, and securely insert it straight to the end. B <Only for model with keyboard base> Slide the cover to the arrow direction and then open the cover.

<For tablet> Slide the cover. C Connect the AC adaptor to the DC-IN jack (D) of the com-

puter. D Connect your computer to a power outlet. The shape of AC Plug and AC Outlet depend on the country. The battery charging starts automatically. IMPORTANT l Do not disconnect the AC adaptor until the first-time opera-

tion procedure is completed. l When using the computer for the first time, do not connect any peripheral device (including wired LAN cable) except the battery pack and AC adaptor. l Handling the AC adaptor Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the battery pack alone. l When the DC plug is not connected to the computer, dis-

connect the AC cord from your electrical outlet. Power is consumed simply by having the AC adaptor plugged into an electrical outlet. 3 1 C D

<For tablet>

D 2 2 3 2 3 4 29 Getting Started First-time Operation 4 3 1 4 Open the display

<Only for model with keyboard base>

A Pull out the handle. 2 4 E l If you do not pull out the handle before opening the display, the computer may fall over due to the weight of the display. B Rotate the latch (D) to the arrow direction. C Hold the dents with both hands, and lift the display slightly. D Hold the side of the computer with either of your hands and then lift up the display to open. IMPORTANT l Do not open the display wider than necessary (150 or more), and do not apply excessive pressure to the LCD. Do not open or close the computer holding the edge of the LCD segment. 5 5

<For tablet>

F G IMPORTANT 5 Turn on the computer Press and hold the power switch lights. until the power indicator l Do not press the power switch repeatedly. l The computer will be forcibly turned off if you press and hold the power switch for four seconds or longer. l Do not perform the following operation until the First-time Operation is completed.

<Only for model with keyboard base> Touching the release lever (F) and detach lock (G)

<Only for model with keyboard base> Detaching the tablet from keyboard base Disconnecting the AC adaptor Pressing the power switch

<Only for model with keyboard base> Closing the display Any changes from the default setting of the Setup Utility l Once you turn off the computer, wait for ten seconds or more before you turn on the computer again. l When the CPU temperature is high, the computer may not start up to prevent overheating of the CPU. Wait until the computer cools down, and then turn the power on again. If the computer does not power on even after cooling down, contact Panasonic Technical Support (

Operating In-

structions - Reference Manual). 30 Getting Started 6 Setup Windows Select language and click [Yes]. Follow the on-screen instructions. l The computer restarts several times. Do not touch the touchscreen, external keyboard or external mouse, and wait until the drive indicator has turned off. l After the computer is turned on, the screen remains black or unchanged for a while, but this is not a malfunction. Wait for a moment until the Windows setup screen appears. l During setup of Windows, use the touchpad and clicking to move the pointer and to click an item. l Setup of Windows will take approximately 5 minutes. Go to the next step, confirming each message on the display. l You can set the Wireless Network after the setup of Windows is complete. If Lets connect you to a network is displayed, you can select [I dont have internet]. If Theres more to discover when you connect to the internet is displayed, you can select [Continue with limited setup]. l We recommend that you set the password after the setup of Windows in complete. l If Microsoft Edge-related screens are displayed, click [Get started] and follow the on-screen instructions. IMPORTANT l You can change the user name, image and security setting after setup of Windows. l Use standard characters as a computer name: numbers 0 through 9, uppercase and lowercase letters from A to Z, and the hyphen (-) character. Do not use the following words and characters for user name: CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, LPT, &, space. If the error message The computer name is not valid ap-

pears, check if characters other than the above are not entered. If the error message still remains on the display, set the key entry mode to English (ENG) and enter characters. 7 Restart the computer A Click B Click l A portion of the Panasonic PC Settings Utility functions will

(Start).

(Power) - [Restart]. be enabled after the computer restarts. NOTE l When the Emergency notification setting screen appears, read the on-screen messages carefully. Follow the on-screen instructions. You can set the Emergency notification setting after the setup of Windows is complete. 31 Getting Started First-time Operation 8 Update the on-screen manual A Connect to the internet. Sign in to Windows as an admin-

istrator. For further information, refer to B Update the on-screen manual. Connect to a network. Click Follow the on-screen instructions.

(Start) - [Panasonic PC Manual Selector]. 9 Create a recovery disc A recovery disc allows you to install OS and restore its fac-

tory default condition, in case, the recovery partition of the flash memory is damaged. Refer to Operating Instructions - Reference Manual Important Operation/Settings Create a Recovery Disc about creating the disc. NOTE l To set the password, proceed as follows.

(Start) -

(Settings) - [Accounts] - [Sign-in options]. A Click B Click [Password] - [Add]. To display the password input screen every time the computer is resumed from the modern standby or hibernation, perform the following setting. A Click B Select [Every Time] under Require sign-in.

(Settings) - [Accounts] - [Sign-in options].

(Start) -

l Set the key entry mode to English (ENG) and enter characters. The keyboard layout can be added or changed in the following steps. A Click

(Settings) - [Time & Language] - [Language]. B Click a language and click [Options]. C Click [Add a keyboard] and choose a keyboard from the list.

(Start) -

l Remember your password. If you forget the password, you cannot use Windows. Creating a password reset disk beforehand is recommended. l PC Information Viewer This computer periodically records the management information of the flash memory, etc. The maximum data volume for each record is 1024 bytes. This information is only used for estimating the cause in the case when the flash memory goes down by any possibility. They are never sent to outside via network nor used for any other purpose except for the purpose described the above. To disable the function, add the check mark for [Disable the automatic save function for man-

agement information history] in [Hard Disk Status] of PC Information Viewer, and click [OK]. Then follow the on-screen instructions.

( Operating Instructions - Reference Manual Troubleshooting Troubleshooting Checking the Computers Usage Status) 32 Getting Started Detaching the tablet from the keyboard base When detaching the tablet from the keyboard base while it is turned on, note the following points. IMPORTANT l Before detaching the tablet, confirm the following things.

- Save the necessary data.

- Close files you have opened from removable disks and network drives.

- Remove peripheral devices connecting to the tablet. l Do not detach the tablet in the conditions below. When playing/recording audio files or displaying motion video such as MPEG files. When using communication software or network functions. NOTE l Do not detach the tablet in the rain. A Release the detach lock (A). B Slide the release lever (B) in the direction of the arrow. 1 2 A B C Detach the tablet from the keyboard base. IMPORTANT l When detaching the tablet from the keyboard base, hold the position at the locations dashed line circled in the illustration. l Attach/detach the tablet on a flat location. l While holding the keyboard base with hand, at-

tach/detach the tablet. 33 Getting Started Attaching the tablet to the keyboard base NOTE l Do not attach the tablet in the rain. l Clean the Tablet terminals (D) with a dry cloth. (Attached dust may cause a contact failure.) D A Push the tablet at the locations dashed line circled in the illustration in a downward direction. IMPORTANT l When inserting the tablet, place the keyboard base on a hard stable surface or hold the bottom side of the keyboard base securely with your hand. Correct Incorrect 34 Getting Started B Slide the release lever (B) in the direction of the arrow shown in B. 3 2 A B C Raise the detach lock (A) above to the locked position. l Confirm that the orange-colored signs near the detach lock and the release lever can not IMPORTANT be seen. 35 Getting Started Software License This product incorporates the following software:

(1) the software developed independently by or for Panasonic Corporation,

(2) the software owned by third party and licensed to Panasonic Corporation,

(3) the software licensed under the GNU General Public License Version 2.0 (GPL V2.0),

(4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or

(5) open source software other than the software licensed under the V2.0 and/or LGPL V2.1. The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICU-

LAR PURPOSE. Please refer to the detailed terms and conditions thereof shown in the Instructions - Reference Manual Appendix Software License. At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0, LGPL V2.1 or the other licenses with the obligation to do so, as well as the respective copyright notice thereof. Operating The source code and the copyright notice are also available for free in our website below. Contact Information: oss-cd-request@gg.jp.panasonic.com https://panasonic.net/cns/oss/

36 Appendix MEMO 37 MEMO 38 39 Panasonic Corporation Osaka, Japan Panasonic System Solutions Company of North America Two Riverfront Plaza Newark, NJ 07102 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Panasonic Australia Pty. Limited ACN 001 592 187 ABN 83 001 592 187 1 Innovation Road, Macquarie Park, NSW 2113 Web Site : https://panasonic.net/cns/pc/

Panasonic Corporation 2021 Printed in Taiwan HS0421-0 DHQX1742ZA/T1

 

 

 

 

 

 

 

 

 

 

FZ-G2 < FCC ID: ACJ9TGFZG2>

FCC ID Label location Backside view Battery Pack Label for FZ-G2

(Under the battery pack)

 

 

Ben Botros, Manager Regulatory & Compliance Panasonic Corporation of North America Agent Authorization Letter December 21, 2021 MSBD-21-F013 comply with the relevant provisions of the certification program;

Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Original Application for Panasonic Personal Computer Model FZ-G2 under FCC ID: ACJ9TGFZG2 To whom it may concern:

The undersigned hereby authorize UL Japan, Inc. (UL Japan) to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan on our behalf shall have the same effect as acts of our own. The undersigned hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Japan as our agent, we still recognize that we are responsible to:

a) b) examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

c) granted;

d) disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

e) contains any reference thereto and return any certification documents as required by the Certification Division;

f) standards;

g) make claims regarding certification only in respect of the scope for which certification has been use certification only to indicate the products are certified as being in conformity with specified do not use our product certification in such a manner as to bring the Certification Division into upon suspension or cancellation of certification, discontinue use of all advertising matter that make all necessary arrangements for the conduct of the evaluation, including provision for endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com Ben Botros, Manager Regulatory & Compliance Panasonic Corporation of North America i) h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or j) services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid for a one year period from the date of this letter. This application for the subject equipment has not been submitted to another TCB for certification. Thank you for your attention in this matter. Sincerely, Ben Botros Manager Regulatory and Compliance Panasonic Corporation of North America Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ben Botros, Manager Regulatory & Compliance Panasonic Corporation of North America December 21, 2021 MSBD-21-F013 Request for Permanent & Short-Term Confidentiality Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Original Application for Panasonic Personal Computer Model FZ-G2 under FCC ID: ACJ9TGFZG2 To whom it may concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as permanent confidential document from public disclosure. Theory of Operation Tune-up and Alignment Procedure Block Diagram Simulation report for Power Density Schematics Parts List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In addition, please be advised that Panasonic Corporation of North America hereby requests the following filed sensitive information to be held under short-term confidential, pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions Rules and the provisions in FCC Public DA 04-1705. We request temporarily confidentiality of 45 days, starting from the original issued Certification grant date. Operating Instructions (Users Manual) External and Internal Photographs Test Setup Photographs Panasonic also acknowledges that we will provide appropriate notice to UL Japan should either of the following occur. If we require additional 45 day extension period, we will notify UL Japan with a new request letter at least seven days prior to the short-term confidentiality expiration date [Note: up to a maximum of 3 extensions only allowed], or We will immediately notify UL Japan in the event the information regarding the product or the product is made available to the public. UL Japan will them release the documents listed above for public disclosure, pursuant to FCC Public Notice DA 04-1705.. Sincerely, Ben Botros Manager Regulatory and Compliance Panasonic Corporation of North America Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Qualconn UL Japan, Inc. 526 Asama cho 0021, Japan Part 2 Test Capability Sir/Madame, This letter is being provided to UL Japan, Inc. to attest that the steps required to establish a capability for performing time varying testing in accordance with FCC approved procedure 80 have been successfully s shown in the process summary below. ualcomm Technologies makes no representations or warranties regarding the services provided by third parties, including without limitation, support services for Smart Trans lmelce\ulel-om ey, compliance lab ny such third parties are not agents or subcontractors of QTI (or its affiliates and use the services of such Ely UL Japan, Inc. 9/12/2019

(Pre-existing Agreement) ces Completion Date:

3/26/2021. ere

|s0-wse80-1 (26-56 User Guide Icompletion Date: 1/27/2021

[30-W5680-3 (26-5G Install Guide) Icompletion Date: 1/27/2021

[30-w2112-2 (5G mm NREnabled JaRD sar CHAR and PD CHAR using

|combination of Simulation and Inteasurement) Icompletion Date: 1/27/2021

[30-w2112-4 (Part Static Testing) lcompletion Date: 1/27/2021

[30-2112 (Pare? Dynamic resting) Icompletion Date: 1/27/2021

[s0-w2112-16 (RF Exposure

|compliance Overview) Icompletion Date: 1/27/2021

|30-ws038-27 (Gen2 Overview) Completion Date: 1/27/2021 Completion Date:

aj23/2021

{SW Tools License Purchase) Training Legacy Completion Date:

4/21/2024 - 8/19/2021 FR1 Completion Date:

18/19/2024 - 8/30/2021 FR2 Completion Date:

8/31/2024 - 9/27/2021 Verify (Legacy, FR1, and FR2) Technologies, Inc. essen WAelk=)a ouse Drive, San Diego, CA 92121 www.qualcomm.com Qualconn third parties at own risk ny such third parties are independent contractors and have no authority to bind QTI (or its affiliates) is not an intended beneficiary of any agreement entered into by and between QT (or its affiliates) and any such third party, and any claim that has against any such third parties will be brought solely by the Om against such third parties and not against QTI (or its affiliates). Sincerely, Paul Guckian VP, Engineering EMC & Regulatory 858 6511547