all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.87 MiB | ||||
1 | Cover Letter(s) | / January 04 2014 | ||||||
1 | External Photos | |||||||
1 | RF Exposure Info | / January 04 2014 | ||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | / January 04 2014 | ||||||
1 | Test Report | / January 04 2014 | ||||||
1 | Test Setup Photos | |||||||
1 | Cover Letter(s) | / January 04 2014 |
1 | User Manual | Users Manual | 1.87 MiB |
SC-NJ03_P.fm 1 Owners Manual Portable Wireless Speaker System Model No. SC-NJ03 Licenses Android and Google Play are trademarks of Google Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. Accessories Check the supplied accessories before using this unit. 1 DC cable (SFQ0004) The DC cable is dedicated for this unit, so do not use with other devices. 1 Carrying Poach (SFQ0003) Note Product numbers provided in this Owners Manual correct as of December 2013. These may be subject to change. Control reference guide 1 3 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Register online at www.panasonic.com/register
(U.S. customers only) If you have any questions, visit:
U.S.A. and Puerto Rico : www.panasonic.com/support 2 4 5 6 7 11 8 9 10 P Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 http://www.panasonic.com Panasonic Corporation 2014 Printed in China VQT5J47 F0214TA0 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1 2 3 4 5 6 7 8 9 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 10 11 12 13 14 Precautions WARNING Unit To reduce the risk of fire, electric shock or product damage, Do not expose this unit to rain, moisture, dripping or splashing. Do not place objects filled with liquids, such as vases, on this unit. Use only the recommended accessories. Do not remove the covers. Do not repair this unit by yourself. Refer servicing to qualified service personnel. DC cable The cable is the disconnecting device. Install this unit so that the cable can be unplugged from the USB terminal of PC immediately. CAUTION Unit Do not throw. Do not hit this unit to anything. Do not apply strong pressure to this unit. External case may break when strong impact is applied, causing to damage or malfunction. Do not leave the unit in a car exposed to direct sunlight for a long period of time with doors and windows closed. Product identification marking is located on the bottom of the unit. Keep the volume knob out of reach of children to prevent swallowing. Do not use this unit continuously with high volume sound. This may deteriorate the sound quality of the speaker and severely shorten the life of the speaker. Battery pack (Lithium ion battery pack) This unit has a built-in battery. The following is the caution for removing the battery when disposing of this unit. Do not heat or expose to flame. Do not short circuit. Do not disassemble, crush. Do not re-use. Do not place in microwave ovens. Front Rear 1 DC OUT terminal 2 NFC touch area 3 AUX IN jack 4 Volume knob: Adjusts the volume When the maximum or minimum volume is reached, you will be notified by a beep sound. 5 Battery indicator (red) 6 Bluetooth indicator (blue) 7 DC IN terminal 8 Standby/on switch [/I]
9 Bluetooth pairing button /Play button/Pause button/Call button [
10 Microphone 11 RESET switch [RESET]
]
When this unit does not turn off/on or is not operating correctly in any other way, press the switch by inserting a straightened clip, etc. Conforms to UL STD 60065. THE FOLLOWING APPLIES ONLY IN THE U.S.A. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of this device. SC-NJ03 FCC ID:ACJ-SC-NJ03 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from persons body (excluding extremities: hands, wrists, feet and ankles). A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-
800-8-BATTERY for information on how to recycle this battery. FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Declaration of Conformity Trade Name: Panasonic Model No.: SC-NJ03 Responsible Party:
Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Support Contact: http://www.panasonic.com/contactinfo About the power of this unit This unit has a built-in battery. Please charge the battery before using this unit for the first time. If the battery level is low when this unit is turned on, the battery indicator (red) blinks. Charging the battery Connect this unit with the power turned off and the PC with the power turned on using the DC cable (supplied). Listening to audio from a Bluetooth device Preparation Enable the Bluetooth function of the device you want to connect to, please bring it closer to the unit. Use a Bluetooth device within the approximate range of 10 m (33 ft.) from the unit. If you intend to use an NFC (Near Field Communication)-compatible Bluetooth device, proceed to One-Touch Connection (Connecting by NFC). DC cable
(supplied) If charging is necessary, the battery indicator (red) lights. When charging is complete, the battery indicator goes off. Battery Charge time Approx. 6 hours*1
*1 When charging at the surrounding temperature of 25 oC (i77 oF) after the battery is depleted Using this unit with a built-in battery Unplugging the DC cable and turning on the power by pressing the
[/I]. If the battery level is low during use, the battery indicator (red) blinks. About the battery indicator (red) blinking status when the battery level is low. Blinking Speed Slow blinking
(at approximately 2 second intervals) Fast blinking
(at approximately 1 second intervals) Battery status About 15%*2 About 5%*2
*2 These battery statuses of the unit serve only as an approximation, and may vary according to the conditions of use. Using and charging by connecting to a PC turned on Press [/I] to turn this unit on. The Bluetooth indicator (blue) blinks or lights, and it is possible to operate this unit with the supplied power from a PC. The volume will decrease compared with using a built-in battery power, however this does not mean a malfunction with this unit. It takes longer to charge while this unit is turned on. Note Do not use any other DC cables except the supplied one. (Operation is not guaranteed.) When this unit is not used over a long period of time, charge the built-in battery at least once every six months to prevent it from deteriorating. Communication is not possible when this unit is connected to a PC. Charging may not start if the battery level is sufficiently high even if it is not full. To ensure safety, in the case of an excessive input signal, the system may be automatically interrupted and power is turned off. Auto Power Off This unit automatically turns off if there is no audio input and no operation is performed for approximately 10 minutes. Note This function will not operate when the AUX input is used while connected with the DC cable. This function may operate even when the music is being played back if the volume of the connected device is low. This function may not operate depending on the connected device. When the DC OUT terminal is in use, this function will not work. Connecting via Bluetooth menu Pairing with Bluetooth device 1 Press [/I] to turn this unit on. The Bluetooth indicator (blue) blinks slowly. If this unit is being used for the first time (factory preset state):
The Bluetooth indicator (blue) blinks fast. The unit will enter pairing standby.
Skip to step 3. 2 Press and hold [
] until the Bluetooth indicator (blue) blinks fast. The unit will enter pairing standby. 3 Select SC-NJ03/NJ40 from the Bluetooth devices Bluetooth menu. When the Bluetooth device is paired and connected, the Bluetooth indicator (blue) on the unit lights up. If prompted for a passkey, input 0000. If the Bluetooth device need to operate the Bluetooth pairing setting and the Bluetooth connecting setting, operate both settings. The Bluetooth device displays this unit as SC-NJ03/NJ40. 4 Start playing back audio on your Bluetooth device. The volume can be adjusted by rotating the volume knob of the unit. When the maximum or minimum volume is reached, you will be notified by a beep sound. Press the [
] on this unit to play back/stop media.
(If the Bluetooth device is compatible with AVRCP (profile). Listening to audio from a paired device When this unit is turned on, the Bluetooth indicator (blue) will blink slowly indicating that the unit is in connection standby mode. Please perform Steps 3 and 4. When the power is turned on, this unit is connected to the last-used Bluetooth device. At this point, please perform Step 4. One-Touch Connection (Connecting by NFC) For NFC-compatible AndroidTM (Ver.4.1 or later) devices only Just placing an NFC (Near Field Communication)-compatible Bluetooth device on the unit, you can complete all preparations, from registering a Bluetooth device to establishing a connection. Preparation Turn on the NFC feature of the device. 1 Touch and hold your device on the NFC touch area of this unit.
(Until a pop-up window on your device indicates that the connection is established.) When the unit recognizes your device, a beep sound is emitted. When the Bluetooth device is paired and connected, the Bluetooth indicator (blue) on the unit lights up. Once the registration and connection of the Bluetooth device is complete, move the device away from the unit. When the Bluetooth indicator (blue) does not light up even if you have touched the NFC touch area, change the touching position. 2 Start playing back audio on your Bluetooth device. Connecting to another device If you touch another device to this unit, you can update the Bluetooth connection. The previously connected device will be disconnected automatically. Disconnecting Bluetooth Turn off this unit or the device. Stop / disable the Bluetooth transmission of the device. Note This unit can only be connected to one device at a time. This unit can register up to 4 devices. When the number of registered devices exceeds the maximum limit, a device that has not made a Bluetooth connection for the longest time will be replaced. This will cancel the registration of the device. To use the device again, re-register it. If the image and sound are out of sync during playback, restart the playback app you are using. If the problem persists, connect the Bluetooth device and this unit with an audio cable (commercially-available). The One-Touch Connection may not work properly depending on the type of device being used. Depending on the specifications and settings of a device, it can fail to connect or some operations can be different. Refer to the operating instructions of the Bluetooth device for details. 1 2 3 4 SC-NJ03_P.fm 2 Receiving a call hands-free If receiving a call on the mobile phone connected to this unit with Bluetooth, you can make a hands-free call through this unit.
(If the mobile phone is compatible with HFP (profile). Preparation Connect this unit and the mobile phone with Bluetooth. Receiving a call Press [
When receiving the call, the Bluetooth indicator (blue) on the unit blinks. Talk into the microphone on this unit.
] when this unit rings. Ending the call Press [
]. Note Adjust the volume during a call with volume knob on this unit. When the mobile phone and the unit are connected with Bluetooth, even if you receive a call and have a conversation on the mobile phone, the unit may also output the incoming voice. To switch from a hands-free call using the unit to a call using only the mobile phone, operate the mobile phone. If a call is received during audio playback using a Bluetooth connection, the sound will automatically switch to the ringtone. If a call is received while the AUX IN jack is in use, the sound will switch to the ringtone of the mobile phone connected with Bluetooth. If you touch other devices to the NFC touch area of this unit when receiving a call, Bluetooth connection will not switch. To mute the ringtone, turn the volume knob of the unit to [- VOL] until no sound can be heard. Some apps for the mobile phone may not be available for hands-free. When the hands-free function is not available, set up a hands-free connection from the mobile phone to this unit. In a place with poor mobile phone reception, it may be harder to have a conversation. Use the mobile phone in a place with good reception. In a place where voices echo considerably, such as an area near a wall, it may be harder to have a conversation. Before using the unit, move it away from the wall or lower its volume. Hands-free function with a mobile phone may not work when you are playing back an audio of other device with a Bluetooth connection. IN jack. Using the AUX input You can listen to audio via the AUX IN jack when this unit is connected to a device with an audio cable (commercially-available). Note When the AUX IN jack is in use, the jack takes priority over the Bluetooth function or the NFC function.
(When a call is received on a unit connected by Bluetooth, the audio will automatically switch to ringtone of the connected Bluetooth unit. After the call, the audio will switch back to the AUX input terminal. ) The setting of the Bluetooth is not changed even if the audio cable (commercially-available) is inserted into AUX When using the AUX input, the volume may seem low depending on the connected device. In that case, check if the volume limit can be changed on the device. For details, refer to the manual of the device. The playback of Bluetooth device stops. When the AUX IN jack is in use and an audio playback of a Bluetooth device starts, noise may occur. About the DC OUT terminal The DC OUT terminal of this unit is for supplying power to a connected device (rated value: 5 V/1 A). Note that the port cannot be used for purposes other than supplying power. Note that when the unit is turned off, charging is not possible. When this unit is connected with DC cable, power cannot be supplied to a connected device. Preparation Turn on the unit. PC. Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, refer to Customer Services Directory (United States and Puerto Rico). Sound from the device is cut off. Simultaneous use with microwaves may result in connection interruptions. Simultaneous use with other 2.4 GHz devices, such as cordless telephones, etc., may result in connection interruptions. Increase the distance between this system and these devices. Do not place the unit in a place where radio waves will be blocked, such as a metal cabinet. The device is out of the 10 m (33 ft.) communication range. Move the device nearer to this unit. (See About Bluetooth) Remove any obstacle between this unit and the device. Switch off any wireless LAN device. When a PC and the unit are connected with Bluetooth, check the sound output destination setting of the If the sound skips or is not output correctly in other ways, perform To return to the factory preset state, and register the unit to the Bluetooth device again. Depending on the device connected to the unit, sound may be cut off or noise may be produced. When this happens, lower the volume of the device. The battery indicator (red) blinks during charging. It is recommended to charge the battery in the temperature of between 10 oC and 35 oC
(i50 oF and i95 oF). The battery indicator (red) may flash and charging may not be possible when it is out of recommended temperature range. The battery may not charge when the temperature surrounding the battery is high during the operation or right after the operation even when it is within the recommended temperature range. In such case, stop the usage and let it cool down. The volume does not increase. Check the volume of the unit or the Bluetooth device. The device cannot be connected. Refer to the operating instructions of the device, and perform the pairing operation again.
(See Pairing with Bluetooth device) Make sure that this unit is not connected to a different device. The registration information of the unit may have been deleted from the Bluetooth device. Register the unit again. Delete the registration information of the unit through the Bluetooth menu, etc. on the Bluetooth device first, and try to register the device again. The device is connected but audio cannot be heard from this unit. For some built-in Bluetooth devices, you have to set the audio output to SC-NJ03/NJ40 manually. Read the operating instructions of the device for details. This unit is not operating correctly. For example, this unit turns off all of a sudden or all indicators blink. Press [RESET] by inserting a straightened clip, etc. The registration information of the Bluetooth devices will not be deleted. (See Control reference guide) The One-Touch Connection (NFC feature) is not working. Turn on the NFC feature of the device. Volume is low when this unit is connected to a TV via Bluetooth. Adjust the volume on the TV. The volume of headphone output may be coupled with the volume of the Bluetooth output depending on the TV. In such case, adjust the volume of the headphone output on the TV. Maintenance Turn off the power of this unit and wipe with dry soft cloth. Disconnect the DC cable when the DC cable is used. When it gets very dirty, wipe off dirt with a cloth immersed in water and wrung strongly, and then wipe with dry soft cloth. Solvents such as benzine, thinner, alcohol, oil, detergents, etc., may cause the external case to be altered or the coating may come off, so do not use them. Before using chemically treated cloth, read the instructions that came with the cloth carefully. Side view USB cable (accessory of connected device) To the connected device 1 Using a USB cable, connect the unit and a connected device. During connecting, the battery indicator (red) of this unit lights. 2 Once fully charged, remove the USB cable from the DC OUT terminal. Note A cable compatible with your device is required. If a cable is supplied with your device, use the cable. A USB cable may make the battery indicator (red) light even though you connect the cable only to this unit without a connection to the device. Even if you connect a cable compatible with the DC OUT terminal of this unit, your device may not be charged. In Depending on your device, charging methods other than the specified one may not be allowed. Check the that case, use a charger supplied with your device. operating instructions of your device before use. Do not connect a device with a rated value higher than 5 V/1 A to this unit. Doing so may cause malfunction. To check if charging is complete, look at the screen of the connected device, etc. Audio cannot be played back while this unit supplies a connected device with power. If the battery level is low during use, the battery indicator (red) blinks. ( 2) To return to the factory preset state Perform the following when you want to delete pairing device information, etc. Preparation Turn off the unit. Press and hold [/I] for 10 seconds until battery indicator (red) and Bluetooth indicator (blue) blink. The pairing device information will be deleted by the reset, so it will be necessary to perform pairing again. Delete the pairing information for this unit from the Bluetooth device, then perform the pairing operation again.
-If you see this symbol-
Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. About Bluetooth Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. Frequency band used This unit uses the 2.4 GHz frequency band. Certification of this device This unit conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. The actions below are punishable by law in some countries:
Taking apart/modifying the unit. Removing specification indications. Restrictions of use Wireless transmission and/or usage with all Bluetooth equipped devices is not guaranteed. All devices must conform to standards set by Bluetooth SIG, Inc. Depending on the specifications and settings of a device, it may fail to connect or some operations may be different. This system supports Bluetooth security features. But depending on the operating environment and/or settings, this security is possibly not sufficient. Transmit data wirelessly to this system with caution. This system cannot transmit data to a Bluetooth device. Range of use Use this device at a maximum range of 10 m (33 ft). The range can decrease depending on the environment, obstacles or interference. Interference from other devices This unit may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference if this unit is located too close to other Bluetooth devices or the devices that use the 2.4 GHz band. This unit may not function properly if radio waves from a nearby broadcasting station, etc. is too strong. Intended usage This unit is for normal, general use only. Do not use this system near an equipment or in an environment that is sensitive to radio frequency interference
(example: airports, hospitals, laboratories, etc). Specifications Amplifier section RMS Output Power (Battery):
10 % total harmonic distortion: 2 W (1 kHz, 4 ) FTC Output Power (Battery):
1.0 % total harmonic distortion: 1.5 W (150 Hz-10 kHz, 4 ) Operating distance:
Approx. 10 m (33 ft.) Line of sight Mesurement enviroment: Height 1.0 m (3.3 ft.) Microphone section Type:
Mono Terminals section DC IN (USB-Micro B):
AUX input:
DC OUT (USB-A):
Speaker section Type:
Unit(s):
Impedance:
5 V 500 mA General Power supply:
Stereo 3.5 mm (1/8q) jack Battery Life in Use (Bluetooth):
Internal Battery: 3.6 V (Li-ion: 2200 mAh) 5 V 1 A (Supply output only power-on) 1 way 1 speaker system (Bass reflex type, Mono) Charging Time (Power-off):
Rechargeable times Dimensions (W k H k D):
Approx. 18.5 h*
Approx. 6 h About 500 times Bluetooth section Bluetooth system specification:
Wireless equipment classification:
Supported profiles:
Supported codec:
Frequency band:
40 mm k 1 (19/16q k 1) 4 Ver. 3.0 Class 2 (2.5 mW) SBC 2.4 GHz band FH-SS 50.2 mm k 122 mm k 23.2 mm
(1 31/32q k 4 13/16q k 29/32q) Mass (Weight):
Operating temperature range:
Charge temperature range:
Operating humidity range:
Approx. 118 g (0.26 lbs) 0 oC to i40 oC (i32 oF to i104 oF) 10 oC to i35 oC (i50 oF to i95 oF) 35% to 80% RH (no condensation) Note Specifications are subject to change without notice. Mass and dimensions are approximate.
* By the measurement method prescribed in the provisions. A2DP (SCMS-T compatible)/AVRCP/HFP To remove the battery when disposing of this unit The following instructions are not intended for repairing purposes but for the disposal of this unit. This unit is not restorable once disassembled. When disposing of this unit, take out the battery installed in this unit and recycle it. Use up the battery before disassembling. (For Cautions of the battery) Keep the screws out of reach of children to prevent swallowing. How to disassemble the SC-NJ03 1 2 3 4 Insulate the A with cellophane tape or similar. Do not disassemble the battery. Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO) Panasonic Products Limited Warranty Limited Warranty Coverage
(For USA and Puerto Rico Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor. Parts Product or Part Name Portable Wireless Speaker System 1 Year All included Accessories
(Except Non-Rechargeable Batteries) Only Non-Rechargeable Batteries 90 Days Not Applicable 10 Days Not Applicable Labor 1 Year During the Labor warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold as is. Mail-In Service--Online Repair Request Online Repair Request To submit a new repair request and for quick repair status visit our Web Site at www.panasonic.com/repair. When shipping the unit, carefully pack, include all supplied accessories listed in the Owners Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at www.panasonic.com/BatteryHandling as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty. IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantors Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/support or, contact us via the web at:
http://www.panasonic.com/contactinfo For hearing or speech impaired TTY users, TTY: 1-877-833-8855 Accessory Purchases (United States and Puerto Rico) Purchase Parts, Accessories and Owners Manual online for all Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com Or, send your request by E-mail to:
npcparts@us.panasonic.com You may also contact us directly at:
1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST) Panasonic National Parts Center 20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express) For hearing or speech impaired TTY users, TTY: 1-866-605-1277 As of November 2013 The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. SC-NJ03 MODEL NUMBER SERIAL NUMBER User memo:
DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER USA Only: Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website:
http://www.panasonic.com/environmental/
or call 1-888-769-0149. 5 6 7 8
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-04-01 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2014-04-01
|
||||
1 | Applicant's complete, legal business name |
Panasonic Corporation of North America
|
||||
1 | FCC Registration Number (FRN) |
0003762242
|
||||
1 | Physical Address |
Two Riverfront Plaza, 9th Floor
|
||||
1 |
Newark, NJ
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@telefication.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
ACJ
|
||||
1 | Equipment Product Code |
SC-NJ03
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
B**** B****
|
||||
1 | Title |
Project Manager
|
||||
1 | Telephone Number |
201-3********
|
||||
1 | Fax Number |
201-3********
|
||||
1 |
B******@us.panasonic.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Neutron Engineering, Inc.
|
||||
1 | Name |
S******** L********
|
||||
1 | Physical Address |
No.3,Jinshagang 1st Rd, ShiXia,Dalang
|
||||
1 |
China
|
|||||
1 | Telephone Number |
86-76********
|
||||
1 | Fax Number |
86-76********
|
||||
1 |
s******@btl.org.cn
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Neutron Engineering, Inc.
|
||||
1 | Name |
C**** W********
|
||||
1 | Physical Address |
No.3,Jinshagang 1st Rd, ShiXia,Dalang
|
||||
1 |
China
|
|||||
1 | Telephone Number |
86-76********
|
||||
1 | Fax Number |
86-76********
|
||||
1 |
c******@btl.org.cn
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/16/2014 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Portable Wireless Speaker System | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
BTL Inc.
|
||||
1 | Name |
D****** D********
|
||||
1 | Telephone Number |
00867******** Extension:
|
||||
1 | Fax Number |
0086 ********
|
||||
1 |
d******@btl.org.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0010000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC