|
app
s
|
Applicant Information
|
|
|
1 2
|
Effective |
2016-01-15
|
|
1 2
|
2015-11-19
|
|
1 2
|
Applicant's complete, legal business name |
Panasonic Corporation of North America
|
|
1 2
|
FCC Registration Number (FRN) |
0003762242
|
|
1 2
|
Physical Address |
Two Riverfront Plaza, 9th Floor
|
|
1 2
|
Newark, New Jersey 07102-5490
|
|
1 2
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2
|
TCB Application Email Address |
L******@ul.com
|
|
1 2
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
|
app
s
|
FCC ID
|
|
1 2
|
Grantee Code |
ACJ
|
|
1 2
|
Equipment Product Code |
9TGWW13B3
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2
|
Name |
B**** B******
|
|
1 2
|
Title |
Project Manager
|
|
1 2
|
Telephone Number |
201-3********
|
|
1 2
|
Fax Number |
201-3********
|
|
1 2
|
E-mail |
B******@us.panasonic.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 | No |
| 1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 | No |
| 1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/28/2016 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 | Equipment Class | PCB - PCS Licensed Transmitter |
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Radio Module |
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 | Modular Equipment Type | Single Modular Approval |
| 1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 | Change in identification of presently authorized equipment. Original FCC ID: ACJ9TGWW13B Grant Date: 08/30/2013 |
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
| 1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 | Grant Comments | Class II permissive change to install into Panasonic FZ-M1 tablet computer using reduced power table and antenna gains with proximity sensor triggered power reduction, and collocated with FCC ID ACJ9TGWL15B as described in this filing. The highest reported stand-alone and Simultaneous Transmission use condition SAR values under this filing are 1.37 W/Kg and 1.59 W/kg, respectively. Power out is conducted at the antenna terminal. Single Modular Approval. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. When this device is used for mobile and fixed application, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use. |
| 1 2 | Original Grant Comments on 12/18/2012 were:
Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use. |
| 1 2 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2
|
Firm Name |
UL Japan, Inc. Head office EMC Lab.
|
|
1 2
|
Name |
T****** H******
|
|
1 2
|
Telephone Number |
+81-5********
|
|
1 2
|
Fax Number |
+81-5********
|
|
1 2
|
E-mail |
T******@jp.ul.com
|
|