FCC ID: ACJFZN1E Tablet Computer

Operating Instructions - Reference Manual Tablet Computer Model No. FZ-N1 series Table of Contents Table of Contents Introduction ..............................................................................................4 About this manual .............................................................................................................4 Disclaimers ........................................................................................................................4 Handling cautions .............................................................................................................5 Licenses .............................................................................................................................7 Trademarks ........................................................................................................................7 Getting started ..........................................................................................8 Confirming the included items ........................................................................................8 Description of parts ..........................................................................................................9 Opening and closing the interface cover ......................................................................12 Removing and attaching the battery cover ..................................................................13 Installing SIM cards (models supporting cellular transmission only) .......................15 Installing an SD card .......................................................................................................16 Installing and removing the battery ..............................................................................18 Replacing the battery (Battery warm swap) .................................................................19 Charging the battery .......................................................................................................20 Turning the unit on and off ............................................................................................21 Screen description .................................................................................23 Home screen ....................................................................................................................23 Navigation and function buttons ...................................................................................23 Status bar .........................................................................................................................23 Notifications panel ..........................................................................................................24 Icons .................................................................................................................................24 Customizing the home screen .......................................................................................26 Input ........................................................................................................27 Typing and voice input ...................................................................................................27 Using the keyboard .........................................................................................................27 Connectivity ............................................................................................29 Mobile network (models supporting cellular transmission only) ...............................29 Wi-Fi .................................................................................................................................30 Bluetooth .........................................................................................................................32 Airplane mode .................................................................................................................33 USB connection ..............................................................................................................33 SD memory card ..............................................................................................................33 Security ...................................................................................................35 Locking the screen .........................................................................................................35 Encrypting the SD card ..................................................................................................35

[DeviceManagement] app ...............................................................................................36

[VPN Client] app (certain models only) .........................................................................37 Settings ...................................................................................................38

[Settings] app ..................................................................................................................38 Power options menu .......................................................................................................39

[Dashboard] app ..............................................................................................................39

[UserButtonManager] app ..............................................................................................40 Customized silent mode .................................................................................................41 2 Operating Instructions - Reference Manual Table of Contents

[Panasonic Enterprise Launcher] app ..........................................................................42 Touch operation settings ...............................................................................................42 Accessibility settings .....................................................................................................44 Apps ........................................................................................................45 Starting apps ...................................................................................................................45 Preinstalled apps ............................................................................................................45 Using [Play Store] to download apps (models with GMS only) ..................................47

[StylusNote] app ..............................................................................................................47 Camera ....................................................................................................49 Taking pictures ................................................................................................................49 Recording videos ............................................................................................................49 Using the option menu ...................................................................................................49 Camera settings ..............................................................................................................50 Barcode reader .......................................................................................51 Configuring the barcode reader ....................................................................................51 Using the barcode reader ...............................................................................................51 NFC card reader/writer ..........................................................................52 Hardware diagnostics ............................................................................53 About hardware diagnostics ..........................................................................................53 Running hardware diagnostics ......................................................................................53 Saving or checking the system log and diagnosis results .........................................55 Supplementary items .............................................................................56 Hand strap (FZ-VSTN11AU) ............................................................................................56 Troubleshooting .....................................................................................59 General information ........................................................................................................59 Starting up .......................................................................................................................59 Shutting down .................................................................................................................59 Screen ..............................................................................................................................60 Indicator ...........................................................................................................................60 Touch screen operation .................................................................................................61 Connectivity .....................................................................................................................61 Sound ...............................................................................................................................62 Other .................................................................................................................................62 Appendix .................................................................................................64 Factory data reset ...........................................................................................................64 Tips for battery usage .....................................................................................................64 Updating the software ....................................................................................................65 Regulatory information ...................................................................................................67 Specifications ..................................................................................................................69 Accessories .....................................................................................................................74 WARRANTY for U.S.A .....................................................................................................76 WARRANTY for Canada .................................................................................................80 WARRANTY for Europe ..................................................................................................84 Operating Instructions - Reference Manual 3 Introduction Introduction About this manual Thank you for purchasing this Panasonic product. For optimum performance and safety, please read these instructions carefully. This manual describes the preparation of the unit for use, and the operations and settings of the main features. Panasonic Corporation and/or its affiliates are referred to collectively as we or Panasonic. This manual describes the barcode reader equipped model as a basic specification. This manual is for both Android 8.1 and Android 9. To confirm the OS version, swipe up the home screen, and then in the app list, tap [Settings] ( [System])*1 [About tablet] confirm under [Android version].

*1 Android 8.1 only This product supports microSD, microSDHC, and microSDXC memory cards. In this document, the term SD card is used as a generic term for any supported memory card. This product supports Nano SIM cards (certain models only). In this document, the term SIM card is used as a generic term for any supported SIM card. Information in this document is subject to change without notice. For the latest information about optional products, refer to the product catalogs, etc. Disclaimers Descriptions in this document are based on models with GMS (Google Mobile Services). Some illustrations and screens in this document may look different from the actual product. Some screen text and procedures in this document may vary from the actual product. Also, the details of the descriptions may vary due to automatic updates of some software. Panasonic assumes no liability for damage incurred from customer misuse or use under other irregular conditions, and damage resulting from the use or the unavailable use of the product. Panasonic shall not be liable for loss of data or other incidental or consequential damages resulting from the use of this product. This product can download, store, forward, and receive additional content, such as applications, ringtones, contact information, and media files. The use of such content may be restricted or prohibited by the rights of third parties, including but not limited to restriction under applicable copyright laws. You are entirely responsible for additional content that you download to or forward from this product; Panasonic is not responsible for such content or its use. Before using such content, it is your responsibility to verify that your intended use is properly licensed or is otherwise authorized. Panasonic does not warrant or guarantee the accuracy, integrity or quality of any additional content or any other third-party content. Under no circumstances will Panasonic be liable in any way for the improper use of additional content or other third-party content by this product or its operator. This document and any related product documentation may refer to services and applications that are provided by third parties. The use of such services or programs may require separate registration with the third party provider and may be subject to additional terms of use. For applications accessed on or through a third-party web site, please review the web sites terms of use and applicable privacy policy in advance. Panasonic does not warrant or guarantee the availability or performance of any third-party web sites, services, or applications. The availability of some functions depends on your units specifications and the locale of purchase. See Specifications (page 69) for information about your unit. This manual is written with the display language set to US English. 4 Operating Instructions - Reference Manual Introduction Handling cautions General use Operating environment Temperature:

Operation: -20 C to 50 C {-4 F to 122 F} (IEC60068-2-1, 2)*1 Storage: -30 C to 70 C {-22 F to 158 F}

Humidity:

Operation: 30 % to 80 % RH (No condensation) Storage: 30 % to 90 % RH (No condensation) Even within the above temperature/humidity ranges, operation for a long time in extreme environments, smoking nearby, or operation in places where oil is used or where there is a lot of dust will result in product deterioration and will shorten the product life. Also, when using the product in cold environments, the product may take longer to start up and battery operation time may be reduced. If the product is wet in temperatures of 0 C {32 F} or below, freeze damage may occur. Make sure to dry off the product in such temperatures.

*1 Do not directly touch this product with your bare hands when using it in a hot or cold environment. Do not place the product in the following areas, as doing so may damage the product. Near electric appliances. The image may be distorted or noise may occur. This product is designed to reduce physical shock applied to the LCD and internal electrical components. However, protection against malfunction due to such shock is not guaranteed. As with any portable device, precautions should be taken to avoid any damage. When operating the screen using the dedicated stylus, do not firmly press it down. Doing so may damage the dedicated stylus or result in scratches or dents on the screen. Do not place objects on the surface of the product or press down hard on the product with sharp objects. The screen surface may get scratched. Do not use the dedicated stylus when dust or dirt (e.g., oil) is on the screen. Otherwise foreign particles on the screen/dedicated stylus may scratch the screen surface or obstruct operation of the dedicated stylus. Use the dedicated stylus only for touching the screen. Using it for any other purpose may damage the dedicated stylus and result in scratches on the screen. Confirm the safety and security of software before downloading or installing it on the product. Installing malware or viruses can cause malfunction and the disclosure of any private information stored in the product, or may cause excessive sound volume. Turn off the product before removing the SIM card or SD card. Failure to do so can result in data loss or damage to the SIM card, SD card, or product. Do not place the product near a television or radio receiver. This may cause television or radio Keep the product away from magnets. Failure to do so may cause malfunction. It is illegal in many areas to record a call without permission. Always ask the other party for permission interference. before recording a call. Follow these instructions and this manual to avoid any damage to the devices. Carefully read the instruction manuals of the peripheral devices. Use peripheral devices that conform to the products specifications. Connect to the connectors in the correct direction. If a connector is hard to insert, do not try forcibly. Check its shape, direction, alignment of pins, etc. Do not use the product if the gasket is damaged, deformed, or peeled off. Protecting your data To prevent accidental loss of data, we recommend that you back up any important data that you store in the product, SIM card, and SD card. Operating Instructions - Reference Manual 5 Introduction To prevent the unintended disclosure of private information, always confirm the destination before sending messages, file attachments, or any other communications, such as email. To prevent the unintended disclosure of sensitive information stored in the SD card, we recommend using the products SD card encryption feature to encrypt the SD card (page 35). Before disposing of the product or handing the product over to a third party, remove the SIM card, SD card, and any other accessories. Before disposing of the product or handing the product over to a third party, perform a factory data reset

(page 64) to erase any data stored in the product. Before using Wi-Fi or Bluetooth features, take appropriate action to secure your data. Waterproof/dustproof The product is waterproof/dustproof when the interface cover and headset jack cover are closed, and the battery and battery cover are attached. Therefore, keep water and dust away from products internal components, accessories, and optional products. To prevent liquids, sand, dust, or any foreign objects from entering the product, always keep the battery cover and battery clean and make sure to firmly close the cover after opening. Take care not to get anything caught between the cover or battery and the product. If the product is exposed to water droplets, wipe them off with a dry, soft cloth and shake the product to remove the water droplets. Next, remove the battery cover, and shake the product while holding down the battery so that it does not detach to remove the water. Then, with the battery still attached, wipe off the water droplets on the battery and back side of the battery cover, and dry thoroughly. Do not leave any water droplets on the product. Water droplets may cause the micro USB port or headset jack to short circuit, or create smears on the screen. If the product is wet, wipe off the moisture before connecting with peripheral devices. Do not dry the product with an appliance or heat source such as a microwave oven or dryer. Accessories Do not use in the rain or in very humid places such as bathrooms because the accessories are not waterproof/dustproof. Stop use if they are worn on the body, because the inside may corrode due to humidity from sweat and cause malfunction. When cleaning the product, make sure to turn it off. When cleaning the product, wipe it with a soft, dry cloth. An alcohol-based disinfectant may be used if necessary. If the product is particularly dirty, thoroughly wring a cloth soaked in water, wipe off the dirt, and then wipe with a dry cloth. Do not clean the product with solvents such as benzene, thinner, or strong alkaline detergent because they may affect the surface of the product. Maintenance Battery The battery is a consumable item. Depending on the usage conditions, it may swell as it reaches the end of its life. When the typical battery life of approximately one year or about 500 charge cycles is exceeded, the battery deteriorates. If the battery begins to swell, or the amount of time it can be used after a full charge becomes dramatically shorter, the battery should be replaced with a new one. Contact your technical support representative. Do not touch the terminals of the battery. Failure to observe this may cause poor contact. When the battery is left installed in the product, it discharges electricity gradually in small amounts even if the products power is off. If left for a long period (several months or more), the battery will over discharge and its performance may deteriorate. Store the battery in environments with an ambient temperature of -20 C to 35 C (-4 F to 95 F). If the battery is stored in other environments, battery performance and battery life may be reduced. 6 Operating Instructions - Reference Manual When storing or transporting the battery, make sure that the batterys terminals do not become dirty and that no foreign objects or debris become attached to the batterys terminals. If battery charging is not completed after the specified charging time has passed, remove the battery from the product. The battery protection device may be damaged. You cannot charge an installed battery if it is not recognized by the product. Make sure that you use the Introduction specified battery. Licenses

*1 Android 8.1 only Trademarks For more details on the relevant software (including license information), refer to the information displayed on the following screen: swipe up the home screen, and then in the app list, tap [Settings]

( [System])*1 [About tablet] [Legal information]. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. microSDXC Logo is a trademark of SD-3C, LLC. The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Android and Google are trademarks of Google LLC. Wi-Fi, the Wi-Fi logo, the Wi-Fi CERTIFIED logo and Wi-Fi CERTIFIED are trademarks or registered trademarks of Wi-Fi Alliance. All other trademarks identified herein are the property of their respective owners. Operating Instructions - Reference Manual 7 Getting started Getting started Confirming the included items If any items are missing, please contact your technical support representative. Main unit 1 Battery (Model number FZ-VZSUN110U or FZ-VZSUN120) 1 In general, FZ-VZSUN110U is used in the illustrations, but FZ-VZSUN120 is used in some illustrations. AC adaptor (Model number FZ-AAE184E) 1

(certain models only) Connect only the supplied USB connection cable. The shape of the power plug varies depending on your country. USB connection cable 1

(certain models only) Operating Instructions - Read Me First 1 8 Operating Instructions - Reference Manual Description of parts Front view Getting started A Indicator Orange, lit: Battery is charging Green, lit: Battery charging is complete Red, lit: Battery level is less than 15 % of a full charge B Front camera C Earpiece D Ambient light sensor, proximity sensor The ambient light sensor automatically adjusts the screen brightness. The proximity sensor prevents accidental operations on the touch panel during phone calls. When using an NFC card or other NFC device, touch the card/device to this area of the unit. Can also be operated while using gloves (glove touch mode). E NFC antenna (internal) F Display (touch panel) G Speaker H Application button [A1] (page 23) I Application button [A2] (page 23) Operating Instructions - Reference Manual 9 Getting started J Application button [A3] (page 23) K Headset jack cover L Headset jack M Power button (page 21) N Microphone O Interface cover (page 12) P micro USB port Q Strap attachment hole*1 R Side button (page 23) S Camera button (page 23) T Cradle rail Used when connecting the unit to an optional cradle, etc.

*1 Not equipped on models without a barcode reader. Opening and closing the headset jack cover Pull back at the protrusion of the headset jack cover with your fingertip. When closing, make sure the cover is closed firmly. IMPORTANT cover. Observe the following to ensure the waterproof and dustproof performance of the unit. Make sure the headset jack cover is securely closed when the headset jack is not being used. When closing the headset jack cover, make sure there is no debris lodged in and around the 10 Operating Instructions - Reference Manual Rear view

<Models without a barcode reader>

Getting started A Microphone B Rear camera C Barcode reader D Battery cover E Battery lock lever F Mobile antenna (internal) G GPS antenna (internal) H Flash Can be used when taking pictures. I Strap attachment hole J Wi-Fi, Bluetooth antenna (internal) K Side button (page 23) L Volume buttons M Cradle rail Used when connecting the unit to an optional cradle, etc. N Expansion bus connector Used when connecting an optional cradle, etc. or for other future expansion options. Operating Instructions - Reference Manual 11 Getting started Opening and closing the interface cover Opening the interface cover 1. Slide in the direction of the arrow at the protrusion (circled in the illustration) with your fingertip. 2. Pull back the cover and rotate it downward. Closing the interface cover 1. Rotate the cover upward and insert it to its original position. 2. Firmly slide in the direction of the arrow until the red area (circled in the illustration) of the cover is no longer visible. IMPORTANT used. the cover. Observe the following to ensure the waterproof and dustproof performance of the unit. Make sure the interface cover is securely closed and locked when the micro USB port is not being When closing the interface cover, make sure there is no debris lodged in the gasket that seals 12 Operating Instructions - Reference Manual Getting started Removing and attaching the battery cover For FZ-VZSUN110U and FZ-VZSUN120 Removing the battery cover 1. Slide the battery lock lever (circled in the illustration) in the direction of

. 2. Slide the battery cover by firmly placing your hands as shown in the illustration. When removing the battery cover, be careful so that you do not drop the battery. Operating Instructions - Reference Manual 13 Top Getting started Attaching the battery cover 1. Place the battery cover on the unit as shown in the illustration. If the battery is protruding out of the unit, gently push the battery in using the battery cover. 2. Slide the battery cover by firmly placing your hands as shown in the illustration until you hear a click. 3. Lock the cover by sliding the battery lock lever (circled in the illustration) toward

. Firmly slide until the red area is no longer visible. IMPORTANT Observe the following to ensure the waterproof and dustproof performance of the unit. Always make sure the battery cover is securely closed and locked. 14 Operating Instructions - Reference Manual Top Getting started Installing SIM cards (models supporting cellular transmission only) You can install up to two SIM cards. When installing or removing a SIM card, place the unit on a flat surface. 1. Remove the battery cover (page 13). If a battery is installed, remove it (page 19). 2. Slide the Nano SIM card slot in the direction of the arrow (

), and then open it (

). 3. Insert the SIM card into the desired Nano SIM card slot. Install only Nano SIM cards. If only one SIM card is installed, insert it into Nano SIM Slot1. Hold the SIM card so that the metal terminals are facing you, and insert with the notch facing in the same direction of the circled area in the illustration below. Operating Instructions - Reference Manual 15 Nano SIM Slot1 Nano SIM Slot2 Getting started 4. Close the Nano SIM card slot (

), and slide it in the direction of the arrow (

) until you hear a click. To remove a SIM card, follow the same procedure, and then pull out the SIM card at step 3. See Mobile network (models supporting cellular transmission only) (page 29) for information on selecting the active SIM card slot and the preferred mobile network mode. Note Installing an SD card When installing or removing an SD card, place the unit on a flat surface. 1. Remove the battery cover (page 13). If a battery is installed, remove it (page 19). 2. Slide the microSD card slot in the direction of the arrow (

), and then open it (

). 16 Operating Instructions - Reference Manual 3. Insert the microSD card into the microSD card slot (

Install only microSD cards. Hold the microSD card so that the metal terminals are facing you, and insert with the notch facing

), and then close the slot (

). in the same direction of the circled area in the illustration below. Getting started 4. Slide the microSD card slot in the direction of the arrow until you hear a click. To remove a microSD card, follow the same procedure, and then pull out the microSD card at step 3. Operating Instructions - Reference Manual 17 Getting started Installing and removing the battery Make sure to turn off the unit before replacing the battery. Installing the battery 1. Remove the battery cover (page 13). 2. Insert the tabs at the batterys terminal side (

battery into place (

). For FZ-VZSUN110U For FZ-VZSUN120

) into the notches of the unit (

), and then lower the The battery may protrude out of the unit even if you install the battery correctly. However, this is not a malfunction or defect. IMPORTANT Observe the following to ensure the waterproof and dustproof performance of the unit. When installing the battery, make sure there is no debris lodged in the gasket that seals the unit and in the area around the battery. Make sure the gasket of the unit is not damaged, deformed, or peeled off. 18 Operating Instructions - Reference Manual Removing the battery 1. Remove the battery cover (page 13). 2. Lift the battery up using the tab (circled in the illustration) (

), then remove it (

). For FZ-VZSUN110U For FZ-VZSUN120 Getting started IMPORTANT Do not remove the battery while the unit is wet. When the unit is wet, remove the water by wiping off the water droplets and thoroughly drying the unit before removing the battery. (See Waterproof/dustproof (page 6).) Replacing the battery (Battery warm swap) You can replace the battery without turning the unit off. Replace the battery within 30 seconds. If more than 30 seconds has passed, apps that are running are forced to close and you may lose unsaved data. During warm swapping, all wireless functions are turned off temporarily. 1. Press and hold

(power button) until the power options dialog is displayed, and then tap [Battery Hot Swap]. You can also operate from [Warm Swap] in the app list. 2. Follow the on-screen instructions. It may take some time until the indicator lights in green. 3. Replace the battery. IMPORTANT Make sure the unit is not accessing the microSD card or SIM card before warm swapping the battery. Do not remove the SD card or SIM card while warm swapping the battery. Make sure you save any important data before warm swapping the battery. Operating Instructions - Reference Manual 19 Getting started Charging the battery The battery is not charged at the time of purchase. Charge the battery before turning on the unit for the first time or after an extended period of storage. Using the AC adaptor (FZ-AAE184E) to charge the unit 1. Face the USB mark of the USB connection cable upward, and connect the AC adaptor (A) and the unit (B). 2. Plug the power plug (C) of the AC adaptor into a power outlet. The shape of the power plug varies depending on your country. Charge the battery in environments with an ambient temperature of 10 C to 35 C (50 F to 95 F). The indicator lights in orange while the battery is charging, and lights in green when charging is complete. The unit prevents overcharging of the battery by charging only when the remaining battery level is less than approximately 95 % of its full capacity. You can also charge the unit by connecting it to the USB port of a computer or other device using a USB connection cable. Note pull by the cable. When removing the USB connection cable, make sure to remove it while holding the plug. Do not When connecting a USB connection cable, note the shape of the micro USB plug and the micro USB port. Do not attempt to connect the USB connection cable upside down. Remove any dust or water droplets from plugs before connecting them. Do not use excessive force when inserting plugs or insert them at an angle. Using optional accessories to charge the unit If FZ-AAE184E is not supplied, you can charge the unit by using the optional Charging Cup and the optional adaptor. For more information, refer to the Operating Instructions of the Charging Cup. Optional accessories Charging Cup: FZ-VCBN11U AC Adaptor: CF-AA6373A 20 Operating Instructions - Reference Manual 1. Insert the adaptor straight into the rear indentation as shown in the illustration, and insert into the DC input jack (

Plug the power plug into a power outlet.

). 2. Rotate the adaptor downward (

), and firmly insert the unit until you hear a click (

). Getting started The battery is not charged at the time of purchase. Charge the battery before turning on the unit for the first time or after an extended period of storage. Charge the battery in environments with an ambient temperature of 10 C to 35 C (50 F to 95 F). The indicator lights in orange while the battery is charging, and lights in green when charging is complete. The unit prevents overcharging of the battery by charging only when the remaining battery level is less than approximately 95 % of its full capacity. You can also charge the unit by connecting it to the USB port of a computer or other device using a USB connection cable. Note by the cable. When removing the USB connection cable, make sure to remove it while holding the plug. Do not pull When connecting a USB connection cable, note the shape of the micro USB plug and the micro USB port. Do not attempt to connect the USB connection cable upside down. Remove any dust or water droplets from plugs before connecting them. Do not use excessive force when inserting plugs or insert them at an angle. Confirming the battery level The battery level is displayed in the upper-right corner of the screen, in the status bar. Fully charged Charging Very low You can also confirm the specific amount of battery level remaining. Swipe up the home screen, and then in the app list, tap [Settings] [Battery]. Turning the unit on and off Turning the unit on Press and hold

(power button) on the top of the unit until the unit briefly vibrates. Operating Instructions - Reference Manual 21 Getting started until the power options dialog is displayed. Turning the unit off 1. Press and hold 2. Tap [Power off]. To restart the unit, tap [Restart]. Turning the screen on and off Going into sleep mode 1. Press

. Waking up from sleep 1. Press 2. Swipe up the screen to release the screen lock. Configuring the unit for the first time The first time you turn the unit on, you will be prompted to configure the initial settings. Follow the on-screen instructions and configure each item as needed. An internet connection is required to configure certain items. 22 Operating Instructions - Reference Manual Screen description Home screen Screen description The home screen is the main screen from which you can launch apps, check widgets, etc. You can customize the home screen to suit your needs by adding, moving, and removing items as desired.

(Customizing the home screen (page 26)) You can also view a list of all installed apps by swiping up the home screen. While the screen is on, you can display the home screen at any time by tapping or A2 (default setting). Navigation and function buttons The navigation buttons are available in most screens and help you navigate the units screens. Returns to the previous screen or closes the current dialog box, menu, etc. Displays the home screen. Displays a list of recently used apps. Once the list is displayed, tap an app to launch it, or swipe left or right to remove an app from the list. You can also tap and hold this while an app is running to split the screen and display two apps at the same time. To return to single screen, swipe the middle line up or down. The unit also features physical buttons that can be used to access various functions quickly. The default button assignments are described below. A1 A2 A3 The same function as The same function as

. Displays the list of options (if available) for the current screen. Side buttons No function by default. Camera button Press and hold to launch the camera app. When using the camera app, press this button to take a picture, start and stop video recording, etc. Some buttons can be customized using the [UserButtonManager] app (page 40). Status bar The status bar is displayed at the top of the screen when using most apps. It displays icons that let you know the status of the battery, network signal, and other features. Operating Instructions - Reference Manual 23 Screen description Notifications panel The notifications panel provides detailed information about incoming email messages, app updates, calendar events, etc. You can open the notifications panel by swiping down from the top of the screen toward the center of the screen. To close the notifications panel, swipe up the screen. While the notifications panel is open, you can swipe down/up to show or hide the hidden items. While the notifications panel is open, you can tap a notification and open the corresponding app, adjust the screen brightness, or switch the displayed apps on and off. You can also swipe a notification left or right to delete it from the panel. to move to [Settings] app. to move or add apps, or to reset the notification panel. Tap Tap Icons Status icons Status icons are displayed in the right side of the status bar. Some commonly displayed icons are explained below. Do not disturb mode (alarms only/priority only) is active*2 Do not disturb mode (total silence) is active*2 Battery is fully charged*1 Battery is charging*1 Battery level is very low*1 Vibration mode is active Do not disturb mode is active*3 Stylus pen mode is active Glove touch mode is active Rain sensing touch mode is active Airplane mode is active 24 Operating Instructions - Reference Manual Screen description Bluetooth is enabled Unit is connected to a Wi-Fi network Unit is not connected to a Wi-Fi network Portable Wi-Fi hotspot is active NFC is active Unit is connected to a mobile network (models supporting cellular transmission only) Unit is not connected to a mobile network (models supporting cellular transmission only)

*1

*2

*3 You can also use the [Settings] app to view details about battery usage. Swipe up the home screen, and then in the app list, tap [Settings] [Battery]. Android 8.1 only Android 9 only Notification icons Notification icons are displayed in the left side of the status bar and in the notifications panel. Some commonly displayed icons are explained below. Customized silent mode is active New email received New Gmail received (models with GMS only) USB tethering is enabled (models supporting cellular transmission only) Multiple tethering methods are enabled (models supporting cellular transmission only) App updates are available (models with GMS only) App was updated successfully (models with GMS only) Operating Instructions - Reference Manual 25 Screen description Customizing the home screen Adding app shortcuts/folders to the home screen 1. Swipe up the home screen, and then in the app list, find the desired app. 2. Tap and hold the desired app, and then move it slightly. The screen switches to the home screen. 3. Drag the app and drop it in the home screen. A folder will be created if you overlap it with another app. To change the folder name, tap [Unnamed Folder] while the folder is open. Adding widgets to the home screen 1. Tap and hold a blank area in the home screen. 2. Tap [WIDGETS]. 3. Scroll to find the desired widget. 4. Tap and hold the desired widget. The screen switches to the home screen. 5. Drag the widget and drop it in the home screen. Moving or deleting items in the home screen 1. Tap and hold the item, and then move it slightly. 2. Drag the item to the desired location (to move) or to [Remove] at the top of the screen (to delete). Changing the wallpaper in the home screen 1. Tap and hold a blank area in the home screen. 2. Tap [WALLPAPERS]. 3. Select the app, and then tap [JUST ONCE] or [ALWAYS]. 4. Select an image to set as the wallpaper, and then tap [Set wallpaper]. Configuring the home screen 1. Tap and hold a blank area in the home screen. 2. Tap [HOME SETTINGS]. 3. Follow the on-screen instructions and configure the desired settings as necessary. 26 Operating Instructions - Reference Manual Input Input Typing and voice input Using the keyboard Changing the default keyboard The units keyboard is displayed automatically when you tap a text entry field or when you are prompted to enter information. You can type using the on-screen keyboard; in some cases, you can also enter text by speaking. 1. Swipe up the home screen, and then in the app list, tap [Settings] [System] [Languages &

input]. input]. 2. Tap [Virtual keyboard], and then select the desired keyboard. Changing the keyboard language 1. Swipe up the home screen, and then in the app list, tap [Settings] [System] [Languages &

2. Tap [Virtual keyboard], select the desired keyboard, and then configure the desired settings according to your needs. If the desired keyboard is not shown, tap [Virtual keyboard] [Manage keyboards], and then select the desired keyboard. Using the SwiftKey keyboard (Android 8.1 only) A Tool bar/Text replacement Some commonly displayed icons are explained below. However, while entering text, text replacements are displayed.

: Displays the settings menu.

: Changes the settings related to keyboard and character input.

: Changes the theme of the keyboard. Operating Instructions - Reference Manual 27 Switches uppercase and lower case letters. Tap two times to lock to uppercase letters. Input

: Clipboard can be used. B Uppercase/lowercase letter key C Pictogram key Enters pictograms and smileys. D Input switching key Switches to alphabet/number and symbol mode. E Google voice typing key Tap and hold to switch to Google voice typing mode. F Delete key Deletes the character to the left of the cursor. G Line feed key Inserts line feeds in text. H Keyboard conversion key Changes the virtual keyboard (page 27). I Close the keyboard 28 Operating Instructions - Reference Manual Connectivity Connectivity Mobile network (models supporting cellular transmission only) You can use the unit to connect to mobile networks and access emails and the Internet. Mobile network-related settings are available by swiping up the home screen, and then in the app list, tapping

[Settings] [Network & Internet] [Mobile network]. Note Attach a SIM card before using mobile networks. The wireless WAN antenna is contained in the gray area indicated in the illustration below. Covering the area around the antenna with your hand may affect the signal quality. Changing the active SIM card slot (models with dual SIM card slots) You may be able to insert two SIM cards into the unit and select which card is active. See Installing SIM cards (models supporting cellular transmission only) (page 15) for the card installation procedure. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Network & Internet] [Mobile network] [Advanced] [SIM card slot]. 2. Select the desired slot and then tap [OK] [OK]. The unit restarts. Depending on the mobile network service provider associated with the corresponding SIM card, you may need to change the preferred mobile network mode (see Changing the preferred mobile network mode (page 29)). Changing the preferred mobile network mode You can select the preferred mobile network mode used for mobile network connections. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Network & Internet] [Mobile network] [Advanced] [Preferred network mode]*1. Depending on your model, [Preferred network type] may be displayed.

*1 2. Select the preferred network mode. Operating Instructions - Reference Manual 29 Connectivity Wi-Fi Note You can use the unit to connect to a wireless LAN access point and access emails and the Internet. The Wi-Fi antenna is contained in the gray area indicated in the illustration below. Covering the area around the antenna with your hand may affect the signal quality. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Network & Internet]

Turning Wi-Fi on and off

[Wi-Fi]. 2. Tap the switch to turn Wi-Fi on or off. Connecting to a Wi-Fi access point

[Wi-Fi]. Make sure that Wi-Fi is turned on. 2. Select the desired network name. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Network & Internet]

If the desired network name is not displayed, you may need to enter the network name (SSID) manually. See Entering the network name (SSID) manually (page 30) for more information. If you are connecting to a network with security protection, enter the password. 3. 4. Tap [CONNECT]. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Network & Internet]

Entering the network name (SSID) manually

[Wi-Fi]. Make sure that Wi-Fi is turned on. 2. Tap [Add network]. 3. Enter the network name (SSID), then select the networks security type and enter the password, if required. 4. Tap [SAVE]. 30 Operating Instructions - Reference Manual Connectivity Selecting the frequency band used for Wi-Fi 1. Swipe up the home screen, and then in the app list, tap [Settings] [Network & Internet]

[Wi-Fi]. Make sure that Wi-Fi is turned on. 2. Tap [Wi-Fi preferences] [Advanced] [Wi-Fi frequency band]. 3. Select the desired setting. Setting a portable Wi-Fi access point (models supporting cellular transmission only) You can use the unit as a Wi-Fi access point to connect other devices that are compatible with wireless LAN to the Internet. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Network & Internet] [Hotspot

& tethering]. 2. Android 8.1 Tap the [Wi-Fi hotspot] switch to turn it on, tap [Set up Wi-Fi hotspot], configure the network name, security type, and password as desired, and then tap [SAVE]. Android 9 Tap [Wi-Fi hotspot], tap the switch to turn on Wi-Fi hotspot, and then configure the network name, security type, password, etc. as desired. Using peer-to-peer Wi-Fi connections (Wi-Fi Direct) The unit can establish peer-to-peer connections with other devices that are compatible with Wi-Fi Direct. This allows you to directly send and receive data between the unit and other devices without using a wireless access point. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Network & Internet]

[Wi-Fi]. Make sure that Wi-Fi is turned on. 2. Tap [Wi-Fi preferences] [Advanced] [Wi-Fi Direct]. 3. Select the desired settings and functions as necessary. Available devices are displayed under [Peer devices]. Operating Instructions - Reference Manual 31 Connectivity Bluetooth Note You can use the unit to connect to other Bluetooth-compatible devices. The Bluetooth antenna is contained in the gray area indicated in the illustration below. Covering the area around the antenna with your hand may affect the signal quality. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Connected devices] (

Turning Bluetooth on and off

[Connection preferences])*1 [Bluetooth]. Android 9 only

*1 2. Tap the switch to turn Bluetooth on or off. Pairing a Bluetooth device Use this procedure to use the unit to initiate the pairing process, such as when pairing a Bluetooth headset. Make sure that Bluetooth is turned on, and set the other Bluetooth device to pairing mode or discoverable mode. (Refer to the instruction manuals included with the other device for details.) 1. Swipe up the home screen, and then in the app list, tap [Settings] [Connected devices] (

[Connection preferences])*1 [Bluetooth] [Pair new device]. Android 9 only

*1 The unit searches for nearby Bluetooth devices, and the names of Bluetooth devices available for pairing are displayed. 2. Tap the name of the device that you want to pair with the unit. 3. Follow the on-screen instructions. Note When the unit receives a connection request from the other Bluetooth device, a pairing request screen is displayed. Follow the on-screen instructions. Removing a paired Bluetooth device 1. Swipe up the home screen, and then in the app list, tap [Settings] [Connected devices] (

[Connection preferences])*1 [Bluetooth]. Android 9 only

*1 2. Tap

[FORGET] of the paired device that you want to remove. 32 Operating Instructions - Reference Manual Connectivity Sharing the units Internet connection via Bluetooth (Bluetooth tethering) Use this procedure to use the Bluetooth connection and share the Internet connection with a Bluetooth device that supports PAN profiles. You may not be able to share the units mobile network connection

(models supporting cellular transmission only) depending on your mobile network service provider. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Network & Internet] [Hotspot

& tethering]. 2. Tap the [Bluetooth tethering] switch to turn it on. When using the unit where wireless connections are prohibited, such as on airplanes and in hospitals, you can turn off all wireless connections by enabling airplane mode. Once you have turned on airplane mode, you can manually turn certain wireless communication features on again, such as Wi-Fi and Bluetooth. Turning airplane mode on and off 1. Swipe up the home screen, and then in the app list, tap [Settings] [Network & Internet] (

2. Tap the [Airplane mode] switch to turn it on or off. You can also turn airplane mode on and off by using the [Dashboard] app (see page 39). You can use the units micro USB port to connect the unit to a computer or other device. Connecting the unit to a computer You can connect the unit to a computer and transfer files. Connect the unit to a computer using the USB connection cable and follow the procedure below. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Connected devices]

Airplane mode

[Advanced])*1. Android 9 only

*1 Note USB connection

[USB]. 2. Tap [Transfer files]. Note the data. You can also change the setting by tapping the notification in the notifications panel. Do not remove the USB connection cable while the unit is being accessed. Doing so may corrupt Sharing the units Internet connection via USB (USB tethering) (models supporting cellular transmission only) Use this procedure to use the units USB connection to share the units Internet connection with a computer. You may not be able to share the units mobile network connection (models supporting cellular transmission only) depending on your mobile network service provider. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Network & Internet] [Hotspot

& tethering]. 2. Tap the [USB tethering] switch to turn it on. SD memory card See Installing an SD card (page 16) for the card installation procedure. See Encrypting the SD card (page 35) for information about encrypting the contents of the SD card. Operating Instructions - Reference Manual 33 Connectivity Confirming the available space on the SD card Swipe up the home screen, and then in the app list, tap [Settings] [Storage]. 34 Operating Instructions - Reference Manual Security Locking the screen Security You can lock the screen to prevent accidental operation. You can also enhance security by requiring a PIN, pattern, or password to prevent the screen from being unlocked. Configuring the screen lock 1. Swipe up the home screen, and then in the app list, tap [Settings] [Security & location] [Screen lock]. If the screen lock is already configured, you must unlock the unit before configuring a different unlock 2. Select the desired unlock method and then follow the on-screen instructions. method. Note The risk of unauthorized access to the unit is increased when using the [None] and [Swipe] unlock methods as these methods provide little to no security. For increased security, select an unlock method that is unknown to others and difficult to guess. Do not use a password, etc. that you already use for other features. Press

(power button) to put the unit into sleep mode, or wait for the screen to automatically turn off. Locking the screen Encrypting the SD card You can encrypt the contents of the SD card. After it is encrypted, the PIN or password used for unlocking the screen must be entered before the SD card can be mounted. IMPORTANT To prevent the unintended disclosure of sensitive information stored on the SD card, we recommend using this feature to encrypt the SD card. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Security & location] (

[Advanced])*1 [Encryption & credentials] [Encrypt SD card]. Android 9 only

*1 2. Tap the [Encryption] switch to turn it on, and then tap [Next]. 3. Enter the units PIN or password, and then tap [

]. This is the same PIN or password used for the screen lock feature (see Locking the screen

(page 35)). 4. Tap [ENCRYPT SD CARD]. Note to charge until the process is finished. Decrypting the SD card Encryption and disabling encryption takes time. Fully charge the battery before starting and continue 1. Swipe up the home screen, and then in the app list, tap [Settings] [Security & location] (

[Advanced])*1 [Encryption & credentials] [Encrypt SD card]. Android 9 only

*1 2. Tap the [Encryption] switch to turn it off, and then tap [Next]. Operating Instructions - Reference Manual 35 Security 3. Enter the units PIN or password, and then tap [

]. This is the same PIN or password used for the screen lock feature (see Locking the screen

(page 35)). 4. Tap [DISABLE SD CARD ENCRYPTION].

[DeviceManagement] app You can disable the units individual hardware features to prevent access to certain functions. IMPORTANT A password must be set in order to use this feature. If you forget this password, there is no way to reset it (it is not erased if the unit is reset using the factory data reset utility) and therefore you will no longer be able to change this features settings. If you forget the password, contact your technical support representative. Enabling and disabling certain hardware features 1. Swipe up the home screen, and then in the app list, tap [DeviceManagement] [Device setting items]. 2. Select the desired feature and then select the desired setting. Repeat this step to change the settings for other features, if desired. 3. Tap [APPLY], enter the password and then tap [OK]. If a password is not set, you will be prompted to create a new one. Some settings will take place the next time the corresponding hardware component is connected, Note mounted, etc. Adding the USB storage 1. Swipe up the home screen, and then in the app list, tap [DeviceManagement] [Device setting items]. 2. Add USB storage with the following procedures.

[Add device]: Enter the vendor ID or product ID of the USB storage you want to add.

[Do scan]: Scan the connected USB storage, and then tap the USB storage you want to add. Restricting the network connection You can restrict connecting servers or connection methods such as mobile networks or Wi-Fi. 1. Swipe up the home screen, and then in the app list, tap [DeviceManagement] [IP Filter Settings]. 2. Tap [Enable IP Filter] to turn on the checkbox. 3. Tap [Use Filtering Rule X] in Filtering Rule 1 to 5 to turn on the checkbox. 4. Tap [Filtering Network] or [Add IP Address to Accept] of the selected Filtering Rule, and then select the usable connection method or add the allowed server. 5. Tap [APPLY], enter the password and then tap [OK]. If a password is not set, you will be prompted to create a new one. Changing or deleting the password used for [DeviceManagement]

1. Swipe up the home screen, and then in the app list, tap [DeviceManagement] [Password settings]. 2. Select the desired item and then follow the on-screen instructions. 36 Operating Instructions - Reference Manual Security

[VPN Client] app (certain models only) The [VPN Client] app is a complete Mobile VPN solution that includes a fully-functional GUI. It is an app developed for Android devices which is based on INSIDE Secures proven QuickSec technology. For detailed information, refer to VPN Client for Android Usage Guide (English) available from the Panasonic website. Panasonic website:

http://pc-dl.panasonic.co.jp/itn/manual/menu_en.html Select a model from the website above. Operating Instructions - Reference Manual 37 Settings Settings

[Settings] app Network & Internet Connected devices Configure the units settings. Swipe up the home screen, and then in the app list, tap [Settings] to display the settings menu. Suggestions for frequently used settings are displayed at the top of the settings menu, and you can display or hide them using at the right side.

The settings are grouped into the categories below. Contains settings related to Wi-Fi, mobile networks, Ethernet configuration, hotspots, tethering, etc. Contains settings related to connected devices, such as Bluetooth, NFC, USB, and external devices*1.

*1 Gadget settings are available only for certain models. Apps & notifications Contains settings related to apps and notifications. Allows you to confirm battery status and usage. Also contains settings related to the battery. Contains settings related to screen functionality, such as brightness, wallpaper, font size, and touch operation. Contains settings related to the units various sounds, volume, Do Not Disturb mode, etc. Battery Display Sound Storage Allows you to confirm the available space in the units internal storage and SD card, and to manage files. Contains settings that control security-related features such as screen lock and data encryption. Also contains settings related to location information. Allows you to register and edit your information. You can also add a new user to share the unit with other users. Also, you can configure settings related to adding accounts and data syncing. Security & location Users & accounts (Android 8.1) Accounts (Android 9) Accessibility Allows you to configure settings related to adding accounts and data syncing. Contains settings that assist the user such as screen readers, display, and interaction controls

(Accessibility settings (page 44)). Digital Wellbeing (Android 9) Allows you to confirm information related to usage habits such as how often you unlock the unit and how long you use apps. You can set timers on apps. 38 Operating Instructions - Reference Manual Settings Allows you to configure the display and input language, date and time, backup, reset, etc. Android 8.1: You can also confirm information about the tablet, such as the status of the battery and the network, and the software version. Contains settings related to Google services. Google System About tablet (Android 9) Allows you to confirm information about the tablet. Power options menu You can press and hold or set the following commonly-used features.

(power button) to display the power options menu. From here, you can perform Power off Restart Battery Hot Swap (see Replacing the battery (Battery warm swap) (page 19)) Stylus pen (see Touch operation settings (page 42)) Glove touch (see Touch operation settings (page 42)) Rain sensing touch (see Touch operation settings (page 42)) Lockdown (Android 9)

[Dashboard] app The [Dashboard] app provides quick access to various unit features. You can use this app to perform the following. Change screen brightness Change speaker volume Confirm battery level Enable and disable airplane mode, Wi-Fi, Bluetooth, location information, WWAN (mobile network connections) (models supporting cellular transmission only)*1, screen auto rotation, customized silent mode, microphone*1.

*1 This item is not displayed by default; you can add it to [Dashboard] if desired. Launch apps Using [Dashboard]

1. Swipe up the home screen, and then in the app list, tap [Dashboard]. By default, you can also press and hold A3 to launch the [Dashboard] app. Features that have been disabled using the [DeviceManagement] app (see page 36) are not 2. Operate the desired function. Note available in [Dashboard]. Adding and deleting tiles You can add up to 12 tiles. 1. Swipe up the home screen, and then in the app list, tap [Dashboard]. By default, you can also press and hold A3 to launch the [Dashboard] app. Operating Instructions - Reference Manual 39 Settings 2. To add tiles Tap [MENU] [Add], select the desired tile type, and then follow the on-screen instructions. Two types of tiles are available.

[Toggles]: Tiles that allow you to enable or disable certain features.

[Application]: Tiles that allow you to launch a specific app. To remove tiles Tap and hold the desired tile, and then tap [YES]. To change the color theme Tap [MENU] [Skin], select the desired theme, and then tap [OK]. Importing and exporting [Dashboard] settings 1. Swipe up the home screen, and then in the app list, tap [Dashboard]. By default, you can also press and hold A3 to launch the [Dashboard] app. 2. To export Tap [MENU] [Export], enter the desired file name (up to 10 characters), and then tap [OK]. To import Tap [MENU] [Import], and then select the desired file. Note Settings are exported to:

[UserButtonManager] app Swipe up the home screen, and then in the app list, tap [Settings] [Storage] [Files]

[com.panasonic.mobile.dashboard]. You can customize the units function buttons. Some of the available functions that you can assign to the buttons are listed below. Back (the same function as

) Home (the same function as Menu Barcode reader trigger Launch the [Dashboard] app or an app of your choosing Capture a screenshot Security mode (turns off the screen and sound) Wake up from sleep mode Changing the functions assigned to the buttons 1. Swipe up the home screen, and then in the app list, tap [UserButtonManager]. 2. Tap next to the item you want to change, and then select the desired function. Default button assignments The default button assignments are explained below. Short press assignments A1 same function as

.) Returns to the previous screen or closes the current screen, menu, on-screen keyboard, etc. (The 40 Operating Instructions - Reference Manual Settings Displays the home screen. (The same function as

.) Displays the list of options (if available) for the current screen. For models with dual SIM card slots: Allows you to select the active SIM card slot. For other models: No function by default. A2 A3 A1+A2 A2+A3 A1+A3 Captures a screenshot. No function by default. Left Side button No function by default. Right Side button No function by default. Left+Right Side button No function by default. Camera button Launches the [Camera] app. Volume up button Increases the volume. Volume down button Decreases the volume. A2 A3 Launches the [Dashboard] app. Left Side button No function by default. Right Side button No function by default. Long press (press and hold) assignments A1 Turns on security mode. (Turns off the screen and sound.) Turns customized silent mode on and off (see Customized silent mode (page 41)). Wakeup Setting Assigns a button to wake up from sleep mode. (No assignment by default.) Customized silent mode Customized silent mode allows you to quickly change a variety of settings that affect sound volume, screen brightness, etc. You can adjust the settings that will be enabled when customized silent mode is turned on. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Sound] ( [Advanced])*1 Configuring customized silent mode

[Customized silent mode]. Android 9 only

*1 Operating Instructions - Reference Manual 41 Settings Note 2. Under [Customize], tap the switch of the desired settings to turn them on or off. 3. Tap the [Customized silent mode] switch to turn it on. Turn off customized silent mode before changing the settings. Turning customized silent mode on and off There are multiple methods you can use to turn customized silent mode on and off. Press the button assigned to customized silent mode in the [UserButtonManager] app (see page 40) Select [Custom silent] in the [Dashboard] app (see Using [Dashboard] (page 39)) Turn on [Customized silent mode] in the [Settings] app (see Configuring customized silent mode

(page 41))

[Panasonic Enterprise Launcher] app You can change the home app to Panasonic Enterprise Launcher. If Panasonic Enterprise Launcher is set, you can control the use of the functions or apps. In Panasonic Enterprise Launcher, there are two modes, kiosk mode and user mode. Administrator login is necessary to customize the Panasonic Enterprise Launcher. Launcher3 is the Android standard home app. Using [Panasonic Enterprise Launcher]

1. Swipe up the home screen, and then in the app list, tap [Settings] [Apps & notifications] (

[Advanced])*1 [Default apps]. 2. Tap [Home app] [Panasonic Enterprise Launcher] ( tap

)*2.

[Admin login] enter the password (default: blank) [OK].

[Settings], and then configure the desired settings according to your needs. 3. Tap 4. Tap

*1 May not be displayed

*2 Android 8.1 only Touch operation settings You can select or adjust the following touch operation modes to suit your working conditions. Stylus pen mode: Changes the screen to a sensitivity optimized for stylus pen (included with certain models and also available as an option) operations. For stylus pens, there are active types and passive types, and you can select the type of stylus pen you will use in [Stylus pen type] ([Passive pen only] by default). Active types are capacitive stylus pens that have a built-in battery and support pen pressure detection and functional buttons. Passive types are stylus pens with fine tips that can operate highly-sensitive capacitive touchscreens. Glove touch mode: Makes the screen more sensitive to touch operations. Useful when operating the unit while wearing gloves. Rain sensing touch mode: Prevents accidental operation when the screen is wet. The screen recognizes touches by the amount of pressure you apply to the screen with your finger. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Display] [Advanced]

[Touch operation mode]. 2. Tap the switch of the desired modes to turn them on. 42 Operating Instructions - Reference Manual Settings 3. When necessary, tap

[Advanced], select the desired feature and configure it as desired.

[Finger sensitivity]: Set the sensitivity required for the screen to respond to touch operations. If the sensitivity is high or the screen is wet, select a lower setting. If you feel that the sensitivity is low, select a higher setting.

[Stylus pen type]: Select the type of stylus pen (active type or passive type). When using both, select [Active and Passive pen].

[Active pen pressure]: Set the pen pressure required for an active type stylus pen to respond.

[Glove thickness]: Set the screen sensitivity according to the glove thickness.

[Coordinates offset]: Set the amount of coordinate offset when operating with gloves. When set to

[Auto], the offset is automatically set according to the [Glove thickness] setting.

[Rain condition]: Set according to the amount of rain falling on the screen, i.e., how wet the screen is. When [Rain condition] is set to [Heavy], tap and hold operations are limited to 2 seconds. Note You can also turn touch operation modes on or off by tapping [Stylus pen] / [Glove touch] / [Rain sensing touch] in the power options menu (see Power options menu (page 39)). In addition, you can use the [UserButtonManager] app to assign these features to the units buttons (see

[UserButtonManager] app (page 40)). Turn glove touch mode off when you are not wearing gloves. Even if glove touch mode is enabled, the unit may not be able to be operated while wearing certain types of gloves. When rain sensing touch mode is enabled, the screen operates in single-finger touch mode (i.e., only one finger press is recognized at a time) and responds by being firmly pressed with a finger. Even if rain sensing touch mode is enabled, the unit may not be able to be operated or may not respond properly to touches when the entire screen is wet or depending on the amount of water on the screen. Temporarily put the unit to sleep mode and wipe the water off of the screen. Remaining battery level display of active type stylus pens (certain models only) While an active type stylus pen is in use, its remaining battery level is detected and displayed with an icon in the following colors. Replace the battery when the icon is displayed in red. Remaining battery level: high Remaining battery level: medium Remaining battery level: low Note Passive pen]. To detect the remaining battery level, set [Stylus pen type] to [Active pen only] or [Active and The remaining battery level of active type stylus pens is detected when an active type stylus pen touches or comes close to the screen. (It may take several seconds for detections to be made.) The remaining battery level is not detected if there is no remaining power in the battery or if a battery is not inserted. Operating Instructions - Reference Manual 43 Settings While active type stylus pens are in use, the color of the icon may change to yellow or red when battery voltage is temporarily lowered. Accessibility settings The unit provides a variety of settings that allow you to change how the user and unit interact. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Accessibility]. 2. Select the desired feature or option and configure it as desired.

[Volume key shortcut]: Allows you to press and hold both volume buttons to start the selected accessibility feature.

[Select to Speak]: Allows you to tap specific items on your screen to hear them read aloud.

[TalkBack] (models with GMS only): Reads items on the screen aloud.

[Text-to-speech output]: Allows you to configure the units text-to-speech features.

[Font size]: Allows you to make the text on the screen smaller or larger.

[Display size]: Allows you to make the items on your screen smaller or larger.

[Magnification]: Allows you to turn on the units screen magnification feature.

[Color correction]: Allows you to correct the colors in the screen.

[Color inversion]: Allows you to invert the colors in the screen.

[Large mouse pointer]: Allows you to make the pointer size larger when a mouse is connected.

[Remove animations] (Android 9): Allows you to speed up the unit by disabling animations.

[Accessibility Menu] (Android 9): If on, allows you to display large menus anytime you tap the icon

[Switch Access] (models with GMS only): Allows you to use one or more switches to select items, at the bottom right of the screen. scroll, enter text, and more.

[Click after pointer stops moving] (Android 8.1) / [Dwell timing] (Android 9): Allows you to set the connected mouse pointer to click when it stops moving.

[Power button ends call] (models supporting cellular transmission only): Allows you to end a phone call by pushing the power button.

[Auto-rotate screen]: Allows you to configure the unit to rotate the screen automatically when the

[Touch & hold delay]: Allows you to adjust the amount of time that passes before the unit recognizes a long tap as a tap-and-hold operation.

[Vibration] (Android 9): Allows you to configure the vibration for rings, notifications, and touch unit is tilted. operations.

[Mono audio]: Combines channels when playing audio.

[Captions]: Allows the display of captions.

[High contrast text]: Allows you to clearly display text by increasing its contrast. 44 Operating Instructions - Reference Manual Apps Apps Starting apps There are several ways you can start an app. Swipe up the home screen, and then in the app list, tap the apps icon Create a shortcut to the app in the home screen (see Adding app shortcuts/folders to the home screen (page 26)) Use the [UserButtonManager] app to assign the app to one of the units buttons (see Changing the functions assigned to the buttons (page 40)) Add the app to the [Dashboard] app (see Adding and deleting tiles (page 39)) Preinstalled apps The unit comes preinstalled with the following apps. The descriptions use the icons in Android 8.1. The icons may vary in Android 9. Barcode Reader Allows you to configure the barcode reader (Configuring the barcode reader

(page 51)). Chrome (models with GMS only) Internet browser app. Dashboard Allows easy access to various features ([Dashboard] app (page 39)). DeviceManagement Allows you to disable the units individual hardware features

([DeviceManagement] app (page 36)). Operating Instructions - Reference Manual 45 Apps Photos (models with GMS only) Allows you to display, edit, and manage photos and movies. Contacts Allows you to store and manage your contacts. Play Store (models with GMS only) Allows you to download and purchase apps

(Using [Play Store] to download apps (models with GMS only) (page 47)). UserButtonManager Allows you to configure the units buttons ([UserButtonManager] app (page 40)). Hardware Diagnostic Allows you to check if the units functions are operating correctly

(About hardware diagnostics (page 53)). SignDemo A demo app for electronic signatures. StylusNote Allows you to save and share handwritten notes ([StylusNote] app (page 47)). 46 Operating Instructions - Reference Manual Apps File Manager (Android 8.1) Allows you to manage the files in the units internal storage. You cannot write or delete files, or add folders in external storage. (Read only) File Copy Allows you to work with files in storage. Other apps are preinstalled in addition to those mentioned above. Using [Play Store] to download apps (models with GMS only) Google Play is an online service that allows you to download and purchase apps and other content. You can use the [Play Store] app to download Google Play content. IMPORTANT Check that the app is safe and install at your own risk. We are not responsible for any malfunction or losses incurred to you or a third party by an app that you have installed. 1. Swipe up the home screen, and then in the app list, tap [Play Store]. 2. Search for the app that you want to download by looking through the various categories or using the search function. 3. Tap the app to see more information about it. 4. Follow the on-screen instructions to download and/or purchase the app. By agreeing to install the app, you assume responsibility for use of the app. Read the displayed information carefully and follow the on-screen instructions. 5. If the app is a paid app, select the desired payment method to complete the purchase. This is an app that allows you to save handwritten notes as images. You can also share saved notes with this app. Navigation menu: Save, share, and delete handwritten notes, change the screen orientation, or turn pen only mode on or off.

[StylusNote] app Icon description Pen tool Eraser tool Operating Instructions - Reference Manual 47 Apps Tool options: Set the pen and eraser thickness, or the pen color. Background tool: Set an image to use as the background. Return to the previous state. Close the app. Note Handwritten notes are saved to:

Swipe up the home screen, and then in the app list, tap [Settings] [Storage] [Files]

[Android] [data] [com.panasonic.psn.stylusdemo]. 48 Operating Instructions - Reference Manual Camera Taking pictures Camera 1. Swipe up the home screen, and then in the app list, tap [Camera]. You can also start the [Camera] app by the following methods. Press and hold the camera button on the side of the unit until it momentarily vibrates. Swipe at the bottom right of the lock screen. 2. Confirm that

(camera mode) is displayed. If is displayed, swipe the screen to the right and then tap to select camera mode. 3. Tap to take a picture. You can also take a picture by pressing the camera button on the side of the unit. When [Focus mode] is set to [Auto], press the button halfway to focus, and then continue to press all the way to take the picture. You can use the digital zoom by pinching in and out or by pressing the volume buttons to adjust the zoom ratio. Recording videos 1. Swipe up the home screen, and then in the app list, tap [Camera]. You can also start the [Camera] app by the following methods. Press and hold the camera button on the side of the unit until it momentarily vibrates. Swipe at the bottom right of the lock screen. 2. Confirm that

(video mode) is displayed. If is displayed, swipe the screen to the right and then tap to select video mode. 3. Tap to start recording, and tap to stop recording. You can also start and stop recording by pressing the camera button on the side of the unit. You can use the digital zoom by pinching in and out or by pressing the volume buttons to adjust the zoom ratio. Using the option menu 1. While using the [Camera] app, tap in the lower-right corner of the screen. 2. Tap the desired icon and then select the desired option. Front/rear camera selector Used to switch between the front and rear camera. Some features are not available depending on which camera is selected. Flash modes

: On

: Off

: Auto*1 Operating Instructions - Reference Manual 49 Camera Scene modes

: Snow

: Sunset

: Night view

: Landscape

: Auto

: HDR*1 Grid lines Self timer*1 Exposure*2 Set whether to display guiding grid lines in the shooting screen.

*1 Only in camera mode

*2 Only when [Manual exposure] is enabled in the camera settings Camera settings In the [Camera] app, swipe the screen to the right and then tap 1. 2. Select the desired feature and configure it as desired.

[Resolution]: Allows you to set the resolution.

[Quality]: Allows you to set the picture quality.

[Focus mode]*1: Allows you to set the shooting mode according to the subject.

[White balance]: Allows you to adjust the color development of images according to the weather and conditions of the shooting location.

[Date stamp]: Allows you to display the date and time when the picture was taken.

[ISO]*1: Allows you to set the ISO sensitivity.

[Save location]: Allows you to save location information in pictures.

[Advanced]: Allows you to set the exposure, storage location, and shutter sound.

*1 Only in camera mode 50 Operating Instructions - Reference Manual Barcode reader Barcode reader Configuring the barcode reader Barcode reader settings 1. Swipe up the home screen, and then in the app list, tap [Barcode Reader]. 2. Select the desired settings and then configure them according to your needs. Triggering the barcode reader You can use the [UserButtonManager] app to configure which button is used to start scanning the barcode. See Changing the functions assigned to the buttons (page 40) for more information. Using the barcode reader Typically, scanned barcodes are entered into the currently selected text field of the app that is in the foreground. You can try using the barcode reader by launching the demo app. 1. Swipe up the home screen, and then in the app list, tap [Barcode Reader]

[Demo]. About the demo app Note Although no functions are assigned to the side buttons by default, the barcode scan function is assigned to them in the demo app. Pressing the buttons emits a laser. Take care not to look directly at the laser or point it at other peoples eyes. Doing so will cause damage to the eyes. Operating Instructions - Reference Manual 51 NFC card reader/writer NFC card reader/writer The unit can read NFC card data. It can also transmit data with other devices that have NFC built in. Note Hold the NFC card in the orientation as shown in the figure. When using NFC, unlock the screen. If the unit is having difficulty reading, slightly shift the position. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Connected devices] (

Turning NFC on and off

[Connection preferences])*1. Android 9 only

*1 2. Tap the [NFC] switch to turn it on or off. Advanced NFC settings

[Connection preferences])*1. Android 9 only

*1 Make sure that NFC is turned on. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Connected devices] (

2. Tap [Advanced NFC settings]. 3. Select the desired settings and then configure them according to your needs. 52 Operating Instructions - Reference Manual Hardware diagnostics About hardware diagnostics Hardware diagnostics If you suspect that the units hardware is not operating correctly, you can use the [Hardware Diagnostic]

app to check if there are problems with the hardware. If there is a hardware problem, contact your technical support representative. This app cannot check for software problems. Diagnosable hardware Automatic Test Wi-Fi, Bluetooth, Wireless WAN (WWAN) (models supporting cellular transmission only), GPS, microSD card (external SD), USB storage, Ethernet Manual Test Touchscreen (Multi-touch, Single-touch), LCD, Sound, Battery Health Running hardware diagnostics A result icon is displayed on the left of the diagnosed device.

: Pass

: Fail Diagnosing with the automatic test 1. Swipe up the home screen, and then in the app list, tap [Hardware Diagnostic]. 2. Turn on the checkbox by tapping the device name ([1. Wi-Fi], [2. Bluetooth], [3. WWAN] (models supporting cellular transmission only), [4. GPS], [5. External SD], [6. USB storage], [7. Ethernet]) that you want to diagnose. To diagnose a microSD card or USB storage device, insert the microSD card or USB storage device into the unit. Back up any important data in the microSD card or USB storage device before diagnosis. 3. Tap [RUN] to start diagnosis. 4. When a message indicating that diagnosis is finished is displayed, tap [FINISH]. Diagnosing the touchscreen (multi-touch) 1. Swipe up the home screen, and then in the app list, tap [Hardware Diagnostic] [8. Touchscreen

(Multi-touch:5points)]. 2. Touch the screen with five fingers. 3. When you remove your fingers from the screen and a message indicating that diagnosis is finished is displayed, tap [PASS], [FAIL], or [RETRY]. Diagnosing the touchscreen (single-touch) 1. Swipe up the home screen, and then in the app list, tap [Hardware Diagnostic] [9. Touchscreen

(Single-touch)]. 2. Touch A with your finger and trace the screen in order to E. 3. When a message indicating that diagnosis is finished is displayed, tap [PASS], [FAIL], or [RETRY]. Operating Instructions - Reference Manual 53 Hardware diagnostics Diagnosing the LCD

<Vertical>

1. Swipe up the home screen, and then in the app list, tap [Hardware Diagnostic] [10. LCD]. 2. Rotate the unit and check that the screen is displayed as follows.

<Horizontal>

3. Tap the screen, and then tap 4. When the confirmation items are displayed, tap the test result items to turn on the checkboxes, and

. then tap [OK]. Diagnosing the sound 1. Swipe up the home screen, and then in the app list, tap [Hardware Diagnostic] [11. Sound]. 2. Tap

, speak into the units microphone, and then tap to stop recording. twice, and the confirmation items are displayed. Tap the test result items to turn on the 3. Tap the saved file to check the recorded sound. 4. Tap [SAVE]. 5. Tap checkboxes, and then tap [OK]. Diagnosing the battery health Health]. 2. Check the details and then tap [OK]. 1. Swipe up the home screen, and then in the app list, tap [Hardware Diagnostic] [12. Battery 54 Operating Instructions - Reference Manual Hardware diagnostics Saving or checking the system log and diagnosis results 1. Swipe up the home screen, and then in the app list, tap [Hardware Diagnostic] [System Checking the system information Information]. 2. Check the details and then tap [OK]. Checking the system log Saving the test results Note The test results are saved to:

Checking saved test results 1. Swipe up the home screen, and then in the app list, tap [Hardware Diagnostic] [System Log]. 2. Check the details and then tap [OK]. 1. After running hardware diagnostics, tap

[Save test result to the internal storage]. Swipe up the home screen, and then in the app list, tap [Settings] [Storage] [Files]

[DiagnosticResults]. 1. Swipe up the home screen, and then in the app list, tap [Hardware Diagnostic] [Test Result]. 2. Select the XML file of a saved test result, and then tap [OK]. 3. Check the details, and then tap to finish displaying the diagnosis results. Sharing saved test results 1. Swipe up the home screen, and then in the app list, tap [Hardware Diagnostic]

[Attach test result to mail]. 2. Select the zip file of a saved test result, and then tap [OK]. 3. Select an app with which to share, and follow the on-screen instructions. Saving Logcat (system log) in the background to the internal storage 1. Swipe up the home screen, and then in the app list, tap [Hardware Diagnostic]

[Save Logcat in background]. 2. Check the details and then tap [OK].

[OK]. To stop saving, tap [Save Logcat in background] again to turn off the checkbox, and then tap Operating Instructions - Reference Manual 55 Supplementary items Supplementary items Hand strap (FZ-VSTN11AU) Note Refer to Removing and attaching the battery cover (page 13) and Installing and removing the battery (page 18) for information about installation and removal of the battery cover and battery. Take care as there is a risk of the unit dropping when the hand strap is loose. Do not use the hand strap if it is worn out or damaged. For typical cleaning, wipe the hand strap with a soft, dry cloth. If the hand strap becomes dirty, wet a soft cloth with water and wring it thoroughly before wiping Do not clean the hand strap with benzene, thinner, alcohol, household cleansers, etc., as these the hand strap. may damage the hand strap. Attaching 1. Turn off the unit, and place it on a flat surface such as a desk with the screen face down. Make sure there are no foreign objects under the unit. 2. Remove the battery cover of the unit, and then remove the dummy mount (

). Remove the dummy mount straight out. 3. Attach the battery cover, insert the hand strap mount (

) into the unit, and then push in until you hear a click. Insert the mount straight in. 56 Operating Instructions - Reference Manual Supplementary items 4. Adjust the hand strap to fit on your hand, and then fold back and fasten the belt. (If the belt is too long, insert it into the hole (

).) Insert your hand into position as shown in the illustration. Fold back and fasten the belt so that the white line (

) on the belt is not visible. If the white line is visible, the belt may come loose because it is not fastened enough. If the belt is long or if the extra length of belt is not inserted into the hole, the belt may be included when using the camera of the unit. Adjust the belt so that it does not interfere with the camera. 5. Pass the attachment lace through both strap attachment holes of the unit (

), and then secure the lace to the hand strap ring (

Pass the attachment lace as shown in the illustration. Secure the attachment lace to each ring. Make sure that the attachment lace is secured to the ring.

). 6. Close the pad (

) and fasten. Make sure not to close the pad over the hand strap. A pen holder (

To remove, follow the procedure for attaching in reverse.

) is also attached. Operating Instructions - Reference Manual 57 Supplementary items Replacing the battery 1. Open the pad (

), remove the mount (

), and then fold back the entire hand strap (

). 2. Replace the battery. 3. Attach the mount and fasten the pad. 58 Operating Instructions - Reference Manual Troubleshooting Troubleshooting General information Starting up The unit does not turn on. If you experience any trouble while using the unit, refer to the information in this section for troubleshooting. If the problem persists, contact your technical support representative. To turn the unit on, press and hold The battery level may be low or completely discharged. Charge the battery. The unit may be too hot or too cold. Leave the unit in an environment of 10 C to 35 C (50 F to 95

(power button) until the unit briefly vibrates. F) for about an hour, and then try again. The unit does not wake up from sleep. The battery may have become completely discharged while the unit was in sleep mode. In this case, any data which has not been saved will be lost, and the unit will not wake up. Charge the battery. The unit may be too hot or too cold. Leave the unit in an environment of 10 C to 35 C (50 F to 95 F) for about an hour, and then try again. Nothing appears on the screen. The screen may have turned off to save power. Press Charge the battery. Install the battery correctly. Replace the battery with a fully-charged one. The screen is too dark. See The screen is too dark. (page 60). The battery cover may be detached. Attach it correctly.

(power button). Other startup problems Disconnect and remove all peripheral devices. Shutting down The unit does not turn off. It may take one or two minutes for the unit to turn off. This is not a malfunction. Press and hold

(power button) for at least 10 seconds to force the unit to restart, and then try again. Disconnect and remove all peripheral devices. Operating Instructions - Reference Manual 59 Troubleshooting Screen The screen is too dark. brightness])*1.

*1 Android 9 only The [Adaptive brightness] setting reduced the brightness according to the ambient brightness. Manually adjust the screen brightness. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Display] ( [Adaptive 2. Tap the [Adaptive brightness] switch to turn it off. 3. Android 8.1 Tap [Brightness level] and then adjust the slider. Android 9 Tap

, and then tap [Brightness level] and adjust the slider. The [Minimum limit brightness] setting of customized silent mode was turned on. Turn the setting off. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Sound] (

[Advanced])*1 [Customized silent mode].

*1 Android 9 only 2. Tap the [Customized silent mode] switch to turn it off, then tap the [Minimum limit brightness] switch to turn it off. 3. Tap the [Customized silent mode] switch to turn it on. There are red, green, or blue dots on the screen, or there is unevenness in screen colors or brightness. The following are not malfunctions. Although advanced high-precision technologies are used in the production of color LCD screens, a very small number of the screen pixels may be dark or remain constantly lit. Due to the natural characteristics of LCD screens, you may notice unevenness in colors and brightness depending on your angle of view. Hues may also vary by product. Residual images may be displayed if the same screen is displayed for a long time. Display a different Residual images are displayed. screen. I cannot operate the touchscreen. The touchscreen operates involuntarily. Temporarily put the unit into sleep mode and then wake it up again. Indicator The indicator flashes in orange. The indicator lights in red. The indicator flashes in red. debris found. The battery cannot be charged temporarily because the ambient temperature is too low or too high. Leave the unit in an environment of 10 C to 35 C (50 F to 95 F) for about an hour. The remaining battery level is approximately less than 15 % of a full charge. Charge the battery. Battery authentication failed. Use only a specified battery. There may be debris lodged in the battery charge terminals. Remove the battery and remove any Charging may have stopped automatically. Disconnect the AC adaptor and then reconnect it. The indicator does not light during charging. Battery charging ends quickly, or the battery cannot be charged at all. The AC adaptor or USB connection cable is not connected properly. Confirm all connections. 60 Operating Instructions - Reference Manual Troubleshooting There may be debris lodged in the battery charge terminals. Remove the battery and remove any debris found. Replace the battery with a new one. The screen is dim and the indicator flashes in red or lights in green. The battery cover may be detached. Attach the cover properly. Touch screen operation The settings described below are explained in Touch operation settings (page 42). I cannot operate the screen while wearing gloves. Turn [Glove touch] on, or increase the [Glove thickness] setting. The screen responds before I have touched the screen. Turn [Glove touch] off, or decrease the [Glove thickness] setting. Turn [Rain sensing touch] on. Turn [Stylus pen] off, or set [Stylus pen type] to [Active pen only]. The screen responds incorrectly when it is wet. Turn [Rain sensing touch] on, increase the [Rain condition] setting, or decrease the [Finger sensitivity] setting. The screen seems slightly unresponsive to touches. Turn [Rain sensing touch] off, or increase the [Finger sensitivity] setting. I cannot perform tap-and-hold operations. Set [Rain condition] to [Light]. The screen does not respond to pinch operations. Turn [Rain sensing touch] off. I cannot operate the unit with an active type stylus pen. Turn [Stylus pen] on, or set [Stylus pen type] to [Active pen only]. I cannot operate the unit with a passive type stylus pen. Turn [Stylus pen] on, or set [Stylus pen type] to [Passive pen only]. My active type stylus pen responds poorly. Set [Stylus pen type] to [Active pen only], or set [Active pen pressure] to [Light]. The touch position and response position are not aligned. Turn [Glove touch] off, or set [Coordinates offset] to [None]. Connectivity The SD card or other external device does not work. The unit cannot connect to a network. The corresponding hardware feature may be disabled by the [DeviceManagement] app (see Enabling and disabling certain hardware features (page 36)). The unit is not recognized as a mass storage device when connected to a computer (models supporting cellular transmission only). Make sure that USB tethering is turned off. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Network & Internet]

[Hotspot & tethering]. 2. Tap the [USB tethering] switch to turn it off. I want to confirm the units MAC address. Follow the procedure below. Operating Instructions - Reference Manual 61 1. Swipe up the home screen, and then in the app list, tap [Settings] ( [System])*1 [About Troubleshooting tablet] ( [Status])*1.

*1 Android 8.1 only 2. Confirm the address. Sound No sound is heard. is turned off. Using the [Dashboard] app, adjust the speaker volume and make sure that the [Silent] checkbox Customized silent mode was turned on. Turn customized silent mode off (see Turning customized silent mode on and off (page 42)) or configure customized silent mode to not mute the units sounds (see Configuring customized silent mode (page 41)). Android 8.1: Do not disturb mode is set to [Total silence]. Open the notifications panel, and then turn off Do not disturb mode or change the mode type. Android 9: Do not disturb was turned on. Open the notifications panel, and then turn off Do not disturb mode or configure Do not disturb settings to not mute the units sounds. To configure Do not disturb settings, swipe up the home screen, and then in the app list, tap [Settings] [Sound] [Do not disturb]. Sound stops or is distorted. It is normal for the sound to stop or be distorted in the following situations. When connecting or disconnecting a headset or headphones When rotating the screen Sounds are heard from the speaker even when a headset or headphones are connected. Notification sounds and alarms are played using the speaker even when a headset or headphones are connected to the unit. This is normal. Swipe up the home screen, and then in the app list, tap [Settings] [Sound] [Advanced], and then tap the [Speaker off during earphone use] switch to turn it on. Other The date and time are incorrect. Confirm the date and time settings. Swipe up the home screen, and then in the app list, tap

[Settings] [System] [Date & time]. Set the date and time automatically. 1. Swipe up the home screen, and then in the app list, tap [Settings] [System] [Date &

2. Tap the [Automatic date & time] and [Automatic time zone] (models supporting cellular transmission only) switches to turn them on. 3. Make sure the unit is in an area with good wireless reception, turn the unit off, and then turn it time]. on again. The unit will not recognize dates after December 30, 2037. The units operation is slow. Ambient temperature may be too low or too high. Leave the unit in an environment of 10 C to 35 C (50 F to 95 F) for about an hour and then try again. The unit does not respond. Turn the unit off and then on again. If an app does not work normally, follow the instructions below to force quit or uninstall the problematic app or process. 1. Swipe up the home screen, and then in the app list, tap [Settings] [Apps & notifications]. 2. Select the desired app or process and then tap [UNINSTALL] or [FORCE STOP]. 62 Operating Instructions - Reference Manual Troubleshooting The screen freezes and no operations can be performed. Press and hold

(power button) for at least 10 seconds to force the unit to restart, and then try again. the Internet. I cannot enter text using voice recognition. An Internet connection is needed to enter text using your voice. Make sure the unit can connect to Some apps do not function after updating the units software. The apps may not be compatible with the newest version of the units software. To return the unit to the previous version of the software, contact your technical support representative. The unit cannot connect to external services (Google services, mobile networks, etc.). Confirm all relevant settings and contact the service provider. If the trouble persists, contact your technical support representative. Location information is incorrect. Mobile networks (models supporting cellular transmission only) and radio waves from satellites are used to acquire location information. Positioning may take time, or location information may be less accurate under the following conditions because radio wave signal reception is poor. Immediately after turning on the unit When acquiring location information for the first time When out of the mobile network range When you are in the following places:

Inside a building Inside a vehicle such as car or train Inside a tunnel or underground Under an elevated bridge In a city with skyscrapers In an area dense with trees In a mountainous region Operating Instructions - Reference Manual 63 Appendix Appendix Factory data reset CAUTION The following procedure resets all settings and erases any data you have stored in the unit. Back up important data before performing this procedure. 1. Swipe up the home screen, and then in the app list, tap [Settings] [System] ( [Advanced])*1

[Reset options]. Android 9 only

*1 2. Tap [Erase all data (factory reset)] [RESET TABLET] [ERASE EVERYTHING]. The unit restarts when the factory data reset is complete. All data in the /ant/sdcard folder will be erased. Data stored in the SD card will not be erased. Tips for battery usage Minimizing battery deterioration The battery is a consumable and the deterioration of its performance and battery life is accelerated under the following conditions. Repeatedly charging the battery Using, charging, or storing the battery in a high-temperature environment To minimize battery deterioration and ensure longer battery life, keep the following tips in mind. Charge in an environment between 10 C and 35 C (50 F to 95 F) If the surrounding temperature is too high or too low, the units indicator flashes in orange and the battery cannot be charged temporarily. Avoid charging more than once per day Charging the battery too often will cause the battery performance to deteriorate. Therefore, the unit will not charge the battery immediately after it is fully charged unless the remaining charge is below 95 %

to avoid overcharging. Maximizing battery operation time To maximize the battery operation time, keep the following tips in mind. Reduce the screens power consumption Reduce power consumption by pressing use, or by reducing the screens brightness level. Turn off wireless devices when not in use

(power button) to put the unit in sleep mode when not in You can use the [Dashboard] app to easily turn off Wi-Fi, Bluetooth, GPS, and mobile network connections (models supporting cellular transmission only). You can also turn on airplane mode to quickly turn off all wireless connections. Reduce the time taken to automatically go into sleep mode Swipe up the home screen, and then in the app list, tap [Settings] [Display] ( [Advanced])*1

[Sleep], and select a shorter amount of time taken for the unit to automatically go into sleep mode.

*1 Android 9 only 64 Operating Instructions - Reference Manual Appendix Updating the software You can update the software when a system update is released. IMPORTANT Check the following before starting the update. The remaining battery level is sufficient The unit has available storage space (swipe up the home screen, and then in the app list, tap

[Settings] [Storage], and if there is no storage space, make some room for the update) 1. Swipe up the home screen, and then in the app list, tap [Settings] [System] ( [Advanced])*1 The date and time are correct

[System updates]. Android 9 only

*1 2. Follow the on-screen instructions. License agreement for the system update service 1. Service introduction The system update service (this service) is offered as a way to keep the products software*1 up to date after purchase, for feature and performance enhancement. Without visiting a customer service center, you can take advantage of convenient software updating to check for any required product updates and wirelessly*2 download and replace outdated software with the latest version. This service is managed by Panasonic Corporation and/or its affiliates, hereafter referred to collectively as we or Panasonic. Read the following terms of use carefully and make sure you understand them before use. By using in this service, you agree to accept all terms of use. 2. Disclaimer Panasonic is not liable for any loss or damage of data with user-installed software from use of this service. Nor are we liable for any malfunction or damage to the product due to user error. For details, see Precautions below. No guarantee is made that this service will be suitable for specific purposes, and we are not liable in any way for indirect, incidental, or consequential loss or lost profit to you or third parties arising from or related to use of this service. Panasonic reserves the right to change or discontinue this service, terms of use, and other matters without prior notice. Check the latest terms of use before using this service. Similarly, we reserve the right to interrupt or discontinue this service without prior notice. 3. Prohibited actions The following actions are prohibited when using this service. If you violate the terms of use by taking the following actions, Panasonic may interrupt or discontinue this service or terminate the agreement without prior notice, and seek compensation. Action that disadvantages Panasonic or third parties, or that causes or poses a risk of loss Action that infringes on or may infringe on intellectual property rights (such as copyrights or trademark rights) of Panasonic or third parties Action that undermines or may undermine the credibility or dignity of Panasonic, such as action offensive to public order and morals Action that is illegal or linked to criminal acts, or which poses a risk of same Action that violates or may violate laws, regulations, or ordinances Other action that we have deemed inappropriate and have requested you to cease 4. Privacy policy 5. Limitation on liability As this service is used, information identifying the product (such as model or serial numbers) is sent to our software update servers. We use this information only to provide service or support, and not for any other purposes. Operating Instructions - Reference Manual 65 Appendix Regarding liability borne by Panasonic in providing this service, and in the context of this license agreement, in the event of willful or gross negligence on our part in providing this service, regardless of the reason, users will be compensated only for an amount equivalent to the value of this service. 6. Precautions Although user data such as photos, email messages, and downloaded files remain on the product during software updates, in some cases it may not be possible to safeguard this data, depending on the condition of the product. We therefore recommend backing up important data. However, please understand that some data (e.g., downloaded files) cannot be backed up. Never turn off the product, reset it, or perform similar operations while a download is in progress, or during updates. If the products software is already up to date, no update is necessary. Note that updating the software may take some time, as data is being downloaded and uploaded. Thank you for understanding that you cannot specify the timing of file distribution to the product or the period for which updates will be valid. This service is not available under the following conditions. When the product is not turned on, or when it is in sleep mode When the product is not connected to a wireless network When the product is in international roaming mode When the product is in airplane mode When tethering mode is enabled When the correct date and time is not set When the remaining battery level is less than 50 %

When the server polling interval of the update application is set to 00 While the battery is being replaced (warm swap) Intellectual property rights Data provided to you for this service is licensed to you under the same conditions as in the license agreement of the software for which the data is used. Unless otherwise indicated, use of this service does not constitute licensing or transfer of any intellectual property rights from Panasonic to you. 7. 8. Governing law and court of jurisdiction Japanese law forms the basis for use of this service and interpretation and application of this license agreement. In the case of any disputes over this service, the Tokyo District Court will serve as the competent court of first instance. 9. Service inquiries For any inquiries regarding this service, please contact the Panasonic customer service center.

*1 Only applies to software provided by Panasonic.

*2 A fee may be incurred for users enrolled in pay-per-use data plans, as data transmission for this service will be added to the users other data consumption. 66 Operating Instructions - Reference Manual Appendix Regulatory information Camera Light / Lumire de la camra CAUTION The light from the LED is strong and can injure human eyes. Do not look directly at the LEDs with naked eyes. Possibly hazardous optical radiation emitted from this camera LED light. Do not stare at operating camera in less than 330 mm distance. Otherwise may be harmful to the eyes. La lumire de la diode LED est forte et peut blesser loeil humain. Ne regardez pas directement les LED avec les yeux non protgs. Possibles radiations optiques dangereuses mise par la lumire de la LED de cette camra. Ne regardez pas dans la camra en fonctionnement moins de 330 mm de distance. Vous risqueriez vous blesser les yeux. ATTENTION For USA models FCC RF exposure information The highest SAR value for this product as reported to the FCC when tested for use at the ear is listed below:

Highest value (W/kg) And when worn on the body in a holder or carry case, is listed below:

Highest value (W/kg) For Canada models / Pour les modles du Canada RF exposure information The highest SAR value for this product as reported to the IC when tested for use at the ear is listed below:

ISED certification number Highest value (W/kg) And when worn on the body in a holder or carry case, is listed below:

ISED certification number Highest value (W/kg) FCC ID ACJFZN1D ACJFZN1E FCC ID ACJFZN1D ACJFZN1E 216A-FZN1D 216A-FZN1E 216A-FZN1D 216A-FZN1E 0.54 0.62 1.41 1.29 0.55 0.62 1.41 1.29 Operating Instructions - Reference Manual 67 Appendix Information sur lexposition aux radiofrquences (RF) La valeur de DAS la plus leve obtenue pour ce produit, telle que rapporte lIC lors des essais pour une utilisation prs de loreille, est telle que dcrite ci-dessous :

Numro dhomologation dISDE Valeur la plus leve (W/kg) Et avec lappareil port sur soi dans un portoir ou un botier, la valeur est telle que ci-dessous :

Numro dhomologation dISDE Valeur la plus leve (W/kg) 216A-FZN1D 216A-FZN1E 216A-FZN1D 216A-FZN1E For Europe models 0,55 0,62 1,41 1,29 SAR (Specific Absorption Rates) The SAR limit for mobile devices is 2 W/kg and the highest SAR value for this product when tested at the ear is 0.828 W/kg (for models supporting cellular transmission) and 0.104 W/kg (for models supporting Wi-Fi transmission only)*1. For body-worn operation, the highest SAR value for this product is 1.868 W/kg (for models supporting cellular transmission) and 0.288 W/kg (for models supporting Wi-Fi transmission only)*1.

*1 The tests are carried out in accordance with international guidelines for testing.

<Models without a barcode reader>

SAR (Specific Absorption Rates) The SAR limit for mobile devices is 2 W/kg and the highest SAR value for this product when tested at the ear is 0.365 W/kg (for models supporting cellular transmission)*1. For body-worn operation, the highest SAR value for this product is 1.714 W/kg (for models supporting cellular transmission)*1.

*1 The tests are carried out in accordance with international guidelines for testing. 68 Operating Instructions - Reference Manual Appendix Specifications Typical unit specifications and certain options are described below. Unit configuration may vary. Model No. FZ-N1 CPU Memory Storage Display Wi-Fi

(for NA models) Qualcomm SDM660 3 GB*1 32 GB Internal LCD 4.7 in. HD (1280 720 dots), Aspect ratio 16:9 16 777 216 colors Standards supported IEEE 802.11a / IEEE 802.11b / IEEE 802.11g / IEEE 802.11n / IEEE 802.11ac / IEEE 802.11d / IEEE 802.11h / IEEE 802.11i / IEEE 802.11k /

IEEE 802.11r / IEEE 802.11v / IEEE 802.11w Transmission method OFDM system, DSSS system Wireless channels used IEEE 802.11a / IEEE 802.11n (5 GHz) / IEEE 802.11ac W52 (36, 40, 44, 48 ch) W53 (52, 56, 60, 64 ch) W56 (100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch) W58 (149, 153, 157, 161, 165 ch) IEEE 802.11b / IEEE 802.11g / IEEE 802.11n (2.4 GHz): 1 ch - 11 ch RF frequency band 2.4 GHz Band: 2.412 GHz - 2.462 GHz 5 GHz Band: 5.18 GHz - 5.32 GHz, 5.5 GHz - 5.7 GHz, 5.745 GHz - 5.825 GHz Data transfer rate IEEE 802.11a: up to 54 Mbps IEEE 802.11b: up to 11 Mbps IEEE 802.11g: up to 54 Mbps IEEE 802.11n:

HT20: up to 72.2 Mbps HT40: up to 150 Mbps IEEE 802.11ac:

VHT20: up to 86.7 Mbps VHT40: up to 200 Mbps VHT80: up to 433.3 Mbps Operating Instructions - Reference Manual 69 Appendix Wi-Fi

(for EU models) Standards supported IEEE 802.11a / IEEE 802.11b / IEEE 802.11g / IEEE 802.11n / IEEE 802.11ac / IEEE 802.11d / IEEE 802.11h / IEEE 802.11i / IEEE 802.11k /

IEEE 802.11r / IEEE 802.11v / IEEE 802.11w Transmission method OFDM system, DSSS system Wireless channels used IEEE 802.11a / IEEE 802.11n (5 GHz) / IEEE 802.11ac W52 (36, 40, 44, 48 ch) W53 (52, 56, 60, 64 ch) W56 (100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch) IEEE 802.11b / IEEE 802.11g / IEEE 802.11n (2.4 GHz): 1 ch - 13 ch RF frequency band 2.4 GHz Band: 2.412 GHz - 2.472 GHz 5 GHz Band: 5.18 GHz - 5.32 GHz, 5.5 GHz - 5.7 GHz Data transfer rate IEEE 802.11a: up to 54 Mbps IEEE 802.11b: up to 11 Mbps IEEE 802.11g: up to 54 Mbps IEEE 802.11n:

HT20: up to 72.2 Mbps HT40: up to 150 Mbps IEEE 802.11ac:

VHT20: up to 86.7 Mbps VHT40: up to 200 Mbps VHT80: up to 433.3 Mbps 70 Operating Instructions - Reference Manual Wi-Fi

(for AUS/NZ models) Bluetooth Appendix Standards supported IEEE 802.11a / IEEE 802.11b / IEEE 802.11g / IEEE 802.11n / IEEE 802.11ac / IEEE 802.11d / IEEE 802.11h / IEEE 802.11i / IEEE 802.11k /

IEEE 802.11r / IEEE 802.11v / IEEE 802.11w Transmission method OFDM system, DSSS system Wireless channels used IEEE 802.11a / IEEE 802.11n (5 GHz) / IEEE 802.11ac W52 (36, 40, 44, 48 ch) W53 (52, 56, 60, 64 ch) W56 (100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch) W58 (149, 153, 157, 161, 165 ch) IEEE 802.11b / IEEE 802.11g / IEEE 802.11n (2.4 GHz): 1 ch - 13 ch RF frequency band 2.4 GHz Band: 2.412 GHz - 2.472 GHz 5 GHz Band: 5.18 GHz - 5.32 GHz, 5.5 GHz - 5.7 GHz, 5.745 GHz - 5.825 GHz Data transfer rate IEEE 802.11a: up to 54 Mbps IEEE 802.11b: up to 11 Mbps IEEE 802.11g: up to 54 Mbps IEEE 802.11n:

HT20: up to 72.2 Mbps HT40: up to 150 Mbps IEEE 802.11ac:

VHT20: up to 86.7 Mbps VHT40: up to 200 Mbps VHT80: up to 433.3 Mbps Version 5.0, Class 1 Transmission method FHSS system Wireless channels used 0 - 78 ch (Low energy: 0 - 39 ch) RF frequency band 2402 MHz - 2480 MHz Supported profile A2DP, AVRCP, HFP, HID, HOGP, HSP, MAP, OPP, PAN (models supporting cellular transmission only), PBAP, SPP, GAVDP, GATT, DUN

(models supporting cellular transmission only) Mobile networking

(for NA models supporting cellular transmission) LTE with C.A., HSPA+, UMTS SIM card slot Nano SIM card slot 2 Mobile networking

(for EU models supporting cellular transmission) LTE, HSPA+, UMTS, EDGE, GPRS, GSM SIM card slot Nano SIM card slot 2 Sound Speaker Twin speakers (100 dBA), phone speaker Microphone 3 microphones, noise suppressor Security chip ARM TrustZone (built-in) Operating Instructions - Reference Manual 71 Appendix Camera Front 5 megapixels Video: 1920 1080 pixels, 30 fps Still: 2592 1944 pixels Rear 8 megapixels Video: 1920 1080 pixels, 30 fps Still: 3264 2448 pixels GNSS GPS/GLONASS CEP50 (2 to 4 m)

<Models without a barcode reader>

GPS/GLONASS/Galileo CEP50 (2 to 4 m) Barcode reader 1D, 2D support Enhanced data security FIPS 140-2 level-1 compliant Sensors NFC Card slots Interfaces Touchscreen Ambient light sensor, Digital compass, Gyro sensor, Acceleration sensor, Proximity sensor Built-in (Type A, B, FeliCa, ISO 15693) microSD card slot 1*2

(microSDXC compatible) USB 2.0 port 1*3, Headset jack 1, Expansion bus connector (lower part of the unit) 10-finger touch (capacitive) with:

Glove touch mode*4 Rain sensing touch mode*5 Stylus pen mode (Active type, Passive type) Power supply Battery AC adaptor (optional) Battery

(FZ-VZSUN110U) CF-AA6373A*6 Input 100 V to 240 V AC, 50 Hz/60 Hz Output 16 V DC, 3.75 A Lithium-ion 3200 mAh (typ.) / 3100 mAh (min.) Rated Voltage 3.8 V Operating time (approx.)*7 Talk: 27 hours*8 On user profiles: 12 hours*9

<Models without a barcode reader>

On user profiles: 20 hours*10 Charging time (approx.)*11 2 hours 72 Operating Instructions - Reference Manual Appendix Extended life battery

(FZ-VZSUN120)

(certain models only) Lithium-ion 6400 mAh (typ.) / 6200 mAh (min.) Rated Voltage 3.8 V Operating time (approx.)*7 Talk: 44 hours*8 On user profiles: 19 hours*9 Charging time (approx.)*11 3.3 hours Power consumption*12 Approx. 15 W Dimensions*13

(W D H) Battery (FZ-VZSUN110U) Approx. 74 mm 156 mm 16.3 mm / 31 mm (barcode reader section)

[2.9 in. 6.1 in. 0.6 in. / 1.2 in. (barcode reader section)]

without protrusions Extended Life Battery (FZ-VZSUN120) Approx. 74 mm 156 mm 26 mm / 31 mm (barcode reader section)

[2.9 in. 6.1 in. 1.0 in. / 1.2 in. (barcode reader section)]

without protrusions

<Models without a barcode reader>

Battery (FZ-VZSUN110U) Approx. 74 mm 156 mm 18.3 mm [2.9 in. 6.1 in. 0.7 in.]

without protrusions Weight*14 Approx. 274 g (0.60 lb), with the Battery (FZ-VZSUN110U) Approx. 365 g (0.80 lb), with the Extended Life Battery (FZ-VZSUN120)

<Models without a barcode reader>

Approx. 255 g (0.56 lb), with the Battery (FZ-VZSUN110U) Operating environment*15 Storage environment Temperature

-20 C to 50 C (-4 F to 122 F) Humidity 30 % to 80 % RH Temperature

-30 C to 70 C (-22 F to 158 F) Humidity 30 % to 90 % RH Operating system*16 Water and dust resistance Android 8.1 Android 9 IP66, IP68 Operating Instructions - Reference Manual 73 Appendix

*1

*3

*4

*7

*8

*9

*10

*2 Operation has been tested and confirmed using the following Panasonic brand memory cards: SD (up to 2 GB), SDHC (up to Specifications are subject to change without notice. 1 MB = 1 048 576 bytes, 1 GB = 1 073 741 824 bytes 32 GB). Compatibility with other SD devices is not guaranteed. Does not guarantee operation of all USB-compatible peripherals. This mode may not operate properly depending on the type of glove.

*5 Only single-finger operation is enabled.

*6 The AC adaptor is designed for use with power sources that supply up to 240 V AC. The AC cord supplied with the AC adaptor is designed for use with power sources that supply up to 125 V AC. Actual performance varies depending on usage conditions, connected peripherals, etc. Typically, operating time is reduced in colder environments. Talk time may vary depending on the condition of the mobile network. Including barcode scans, voice call and data transfer based on a typical user profile. Including voice call and data transfer based on a typical user profile.

*11 Varies depending on usage conditions.

*12 Rated power consumption

*13 Actual size may vary by unit configuration.

*14 Average weight. Actual weight may vary by unit configuration.

*15 Product or application booting can dependent upon the battery charge level. Do not expose the skin to this product when using the product in a hot or cold environment. When using the product in hot or cold environments, some peripherals may not perform properly. Confirm the recommended operation environment of the peripherals. Using the product continuously in hot environments will shorten the product life. Avoid continuous use in these types of environments. When using the product in cold environments, the product may take longer to start up and battery operation time may be reduced. Even when using the product within the temperature and humidity ranges listed here, using the product continuously in extreme environments will result in product deterioration and will shorten the life of the product.

*16 Product functionality cannot be guaranteed if the operating system is modified or replaced by the user or a third party. For the latest information about optional products, refer to the product catalogs, etc. Accessories Product name AC Adaptor Battery Pack Cradle Charging Cup Holster Hand Strap Active Pen Protective Film (10 sheets) 4-Bay Cradle 4-Bay Battery Charger 5-Bay Cradle 5-Bay Battery Charger 74 Operating Instructions - Reference Manual Model number CF-AA6373A CF-AA6413A FZ-VZSUN110U FZ-VZSUN120U*1*2 FZ-VZSUN120W*2 FZ-VEBN111 FZ-VCBN11U FZ-VSTN12U*2 FZ-VSTN11AU*2 FZ-VNPN11U FZ-VPF series FZ-VEBN121 FZ-VCBN121 FZ-VEBN141 FZ-VCBN131 5-Bay Charge only Cradle FZ-VCBN141

*1

*2 Certain models only. Not for models without a barcode reader. Appendix Operating Instructions - Reference Manual 75 Appendix WARRANTY for U.S.A Panasonic System Solutions Company of North America (PSSNA) Computer Products - Worldwide Warranties Section 1: Limited Warranty - Hardware PSSNA, referred to hereinafter as Panasonic, will repair the computer products listed below

(Product(s)) with new or rebuilt parts, free of charge in a Global Panasonic designated service location or Panasonic Authorized Service Center for the period specified below from the date of original purchase in the event of a defect in materials or workmanship. These warranties are extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required before warranty performance is rendered. Laptop PC (CF-##) 3 Years Tablet PC / Handheld (FZ-## / JT-##) 3 Years Ultra-Mobile (CF-U#/CF-H# Series) 3 Years PDRC - LCD & Keyboard Assembly 3 Years Original Battery Warranty Batteries supplied with the product are covered under the warranty for one (1) year from date of purchase. Batteries purchased separately are covered under the warranty for one (1) year from the date of purchase. A replacement battery furnished under the product warranty is covered for the remaining period of the one year warranty of the original or purchased battery. Optional: Extended Warranty Program (PC) If this coverage is purchased, the serial numbered Product is entitled to the same manufacturers warranty coverage on the Product with the exception of the battery. The cost of labor, parts, and shipping are included in the price of the Extended Warranty Program. Optional: Panasonic Protection Plus Warranty Any Product for which the Panasonic Protection Plus warranty has been purchased will receive additional coverage for any failure that occurs due to accidental damage. All other terms and conditions of the standard warranty apply and this additional coverage will exist for the duration of the standard warranty period of the Product. If an extended Protection Plus warranty program is purchased, coverage is extended to the end of the last year of extended coverage purchased. This warranty does not cover failures or defects that are caused by fire, intentional acts, loss, theft, improper maintenance, modification or service by anyone other than a Panasonic Authorized Service Provider, or damage that is attributable to acts of God. Cosmetic damage that does not affect functionality is not covered. Cosmetic damage on Products with hardware failures will be repaired in accordance with the warranty terms. This warranty is extended solely to the original purchaser on the Products serial number for which it was purchased. Complete Product replacement fulfills the full obligation and is at the discretion of Panasonic and is limited to once during the coverage term. Refer to the Panasonic website for full terms and conditions on the above programs. Additional exclusions apply please refer to limited warranty exclusions section below. Optional: Panasonic Ultimate Care Warranty Any Product for which the Panasonic Ultimate Care warranty program has been purchased will receive additional coverage as specified in that program, for any failure that occurs due to accidental damage. All other terms and conditions of the standard warranty will apply and this additional warranty coverage will exist for the duration of the standard warranty period of the applicable Product. If an extended warranty 76 Operating Instructions - Reference Manual Appendix is purchased for the Product together with the Ultimate Care warranty program coverage, the warranty term will be extended to the end of the last year of the purchased extended warranty coverage. The Ultimate Care warranty will cover any hardware failures occurring due to accidental damage of the Product with an exclusion only of customer intentional acts and damage caused by events beyond human control, for up to a maximum of 1 % of the total of Products deployed for a specific customer. This includes unlimited replacement of major sub-assemblies and components of the Product during the standard warranty term and any extended warranty term plan that has been purchased by the customer. This also includes cosmetic damages that may result from exposure of the internal components of the Product to the environmental conditions. Additional exclusions apply please refer to limited warranty exclusions section below. Wireless Module Warranty Panasonic approved wireless modems installed in Panasonic brand computers and integrated by Panasonic or an Authorized Panasonic Wireless Integrator are covered under the warranty for the remaining warranty period of the device in which the modem is installed. For devices with less than three

(3) months remaining on the unit warranty, the wireless modem will be covered for a period of three (3) months from the date of installation of the modem, covering only modem replacement or modem installation related issues. All modems must be approved by the wireless carrier prior to use. Any use or attempted use of a wireless modem not approved and activated by the carrier for use on their network is strictly prohibited and is not sanctioned or warranted by Panasonic and may result in legal action. In addition, all modems must be approved by Panasonic as compatible with the device hardware before installation or use. Panasonics sole responsibility for the warranty or technical support of the software required to install or operate the modem is defined in Section 2 (Limited Software Warranty). Any attempted software installation by anyone other than a Panasonic Authorized Wireless Integrator is not covered under warranty and may result in service charges. Installation or attempted installation by any party other than Panasonic or an Authorized Panasonic Wireless Integrator is strictly not covered under the warranty and may void the computer warranty if damage results. Options and Accessories Warranties The below listed Panasonic brand or supplied options and accessories are covered under this limited warranty for the period specified from the date of purchase or as specifically stated:

AC adaptor / Power Cord 3 Years Memory Expansion Card (Panasonic Brand) 3 Years Car Mount - Docking Station PCB or Vehicle Docking Station 3 Years Desktop Port Replicator, I-O Box, Docking Cradle (like CF-U1) 3 Years Antenna Pass-through Cable 3 Years Backlit or Full-sized keyboard 3 Years or assumes warranty of the unit in which it is installed Integrated Panasonic supplied options and kits including, but not limited to Wireless Modems, Media Bay Drives (Floppy, CD, DVD, Combo), Camera, GPS, Bluetooth, Smartcard Reader, Magnetic Card Reader, Barcode Scanner, and Fingerprint Reader 3 Years or assumes warranty period of the unit in which it is installed provided the integration was performed by Panasonic or an Authorized Integrator. Hard Drive / Solid State Drive (Internal) - 3 Years Separately purchased 2nd Hard Drive 1 Year External USB Drives (CD / DVD / Floppy / Hard Drive) 1 Year Optional Battery 1 Year Battery Charger / Multi-Bay Battery Charger 1 Year Stylus Pens, Digitizer & Standard 90 Days (physical damage excluded) Operating Instructions - Reference Manual 77 Appendix Section 2: Limited Warranty - Software Panasonic warrants to you only that the disk(s) or other media on which the Programs are furnished will be free from defects in material and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof to you, as evidenced by your purchase receipt. This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your requirements or that the operation of the Programs will be uninterrupted or error free. Panasonic shall have no obligation for any defects in the disk(s) or other media on which the Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media. Panasonics entire liability and your exclusive remedy under this warranty shall be limited to the replacement, in the United States or other Panasonic designated location, of any defective disk or other media which is returned to Panasonics Authorized Service Center, together with a copy of the purchase receipt, within the aforesaid warranty period. Section 3: Limited Warranty Exclusions - Specifically excluded from the warranty are:

All consumable items; such as screen protection films, logo badges, labels, cleaning cloths, carry cases, manuals, cables, straps, belts, holsters, tethers, and harnesses and any other options and accessories not listed above or covered under a separate warranty The Warranty excludes 3 or less faulty pixels on the LCD screen Failures related to the product operating system, hard drive or solid state drive image, software setup, software program, virus, other program(s) or file(s) on any drive or in any computer memory location Failures due to BIOS settings or changes, as well as any cosmetic or physical damage to the unit Any unit or device with a missing or altered model number or serial number label Cosmetic damage or any damage which occurs in shipment Failures which are caused by products not supplied by Panasonic Failures which result from alteration, accident, misuse, introduction of liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance or modification, use not in accordance with product use instructions Failures due to service by anyone other than a Panasonic Authorized Service Provider Failures caused by improper installation of options or accessories or due to integration by any company other than Panasonic or a Panasonic Authorized Service Center Damage, failure, or loss due to the unit being stolen, lost, misplaced, or used by anyone other than the original purchaser Damage that is attributable to acts of God

* Protection Plus and Ultimate Care warranty programs provide protection against accidental damage. Neither program is intended to provide product refurbishment due to normal wear and tear through normal use.

* Customers who have twenty (20) or more units requiring service are required to contact Panasonic at 800-527-8675 and request Field Engineering assistance to coordinate higher volume repairs. This limited warranty only covers failures due to defects in materials or workmanship which occur during normal use. If a unit is sent to a Panasonic Authorized Service Center and no hardware failure is found, the customer will be billed for labor to correct a software issue or reimage the applicable Hard Disk, or Solid State Drive plus shipping and applicable administrative fees at the current rates set by the service provider. THIS PRODUCT IS NOT INTENDED FOR USE AS OR PART OF NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/

SYSTEMS*1. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.

*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include class 2 Electronic Flight Bag (EFB) Systems and Class 1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted onto the aircraft. Class 1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No. 36. 78 Operating Instructions - Reference Manual Appendix Other Limits and Exclusions: There are no other express warranties except as listed above. PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. For technical support or to arrange for service on your Panasonic computer product, call our toll-free hotline at 1-800-LAPTOP5 [option 1] (800-527-8675). Operating Instructions - Reference Manual 79 Appendix WARRANTY for Canada For Canada PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY Coverage Panasonic Canada Inc. (PCI) warrants to you, the first end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms set forth below, during the period of warranty coverage specified. Scope of Coverage Period of Coverage Type of Failure Coverage Defective Materials or Workmanship Three (3) Years from Date of Original End User Customer Purchase Laptop Computers (except Battery) and AC Adaptor Factory/PCI installed options including Wireless WAN, GPS, Bluetooth, Finger print reader, Backlit keyboard, Memory Card, Optical Drives, Cameras, Smart card Readers, Magnetic Card Readers and Barcode Scanners Ultra-Mobile PC Tablet PC PDRC LCD and Keyboard Assemblies Port Replicator Cradle Charging Cup Battery Battery charger AC Adaptor and Power Cord Car Adaptor and Power Cord External USB Drives Standard or Digitizer Stylus Pen All consumable items including protection film, cleaning cloth, carry case, tether and harness One (1) Year from Date of Original End User Customer Purchase Defective Materials or Workmanship Defective Materials or Workmanship Ninety (90) Days from Date of Original End User Customer Purchase No Coverage Remedy In the event of a warranty claim, contact PCIs representatives within the applicable warranty period, identifying the nature of the defect claimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. Fri. (excluding holidays) for instructions on how to obtain service. A purchase receipt or other proof of date of original purchase is required before warranty service is performed. Defective parts covered by this Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair is subject to the terms of this Limited Warranty for the balance of the original period of warranty coverage. No Coverage This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defects in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, introduction of liquid or other foreign matter into the product, alteration or servicing by anyone not authorized by PCI, or act of God. THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/

SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/

80 Operating Instructions - Reference Manual Appendix SYSTEMS*1. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.

*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36 IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICE Carefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original purchase. No liability is assumed for loss or damage to the product while in transit, if you chose your own transportation carrier. SOFTWARE MEDIA LIMITED WARRANTY Coverage PCI warrants to you, the first end user customer, that the disk(s) or other media on which software program(s) is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receipt as evidenced by your purchase receipt for your Panasonic Computer product. THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software. Please refer to the software licensors written warranty (accompanying the copy of the software) for any software warranty claim. Claim Procedure In the event of a defect in material or workmanship in the media during the sixty (60) day warranty period, and you return it, transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, 5770 Ambler Drive, Mississauga, Ontario L4W 2T3, within the warranty period, together with a copy of your purchase receipt, and an explanation of the suspected defect, PCI will replace in Canada the defective disk(s) or other media. Remedy PCIs entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only. It does not cover any other damages, including, but not limited to, loss of use or profit loss, or special, indirect or consequential damages, or other claims, whether or not of similar character. No Coverage This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmental conditions other than those specified by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modification or attempted modification of the program, or if damaged by accident or act of God. PCI is not responsible for damage to or loss of any program, data or removable storage media. GENERAL NO OTHER WARRANTIES PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE, SOFTWARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES. NO LIABILITY FOR CONSEQUENTIAL DAMAGES IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THE COMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL. IN ANY EVENT, PCIS MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THE COMPUTER PRODUCT. NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION AROSE. Statutory Warranties Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you. Operating Instructions - Reference Manual 81 Appendix Pour le Canada GARANTIE LIMITE ORDINATEURS ET PRIPHRIQUES PANASONIC Couverture Panasonic Canada Inc. ( PCI ) garantit lacheteur original que ce produit informatique

( lexclusion des supports des logiciels) est, au moment de sa vente par PCI ou dun revendeur agr par PCI, exempt de dfauts de pices et de fabrication dans les conditions normales dutilisation, et ce, pendant la priode de couverture de la garantie, sous rserve des modalits dcrites ci-dessous. lments couverts Dure de couverture Type de couverture Trois (3) ans partir de la date dachat original. Dfauts de pices et de fabrication Ordinateurs blocs-notes (sauf batteries) et adaptateur secteur Options installes en usine/par PCI incluant :

WAN sans fil, GPS, Bluetooth, lecteur dempreintes digitales, clavier rtroclair, carte mmoire, lecteurs optiques, camras, lecteurs de carte puce, lecteurs de carte magntique et scanners de code-barres Ordinateurs personnels ultra-portables Ordinateurs tablettes Ensembles PDRC ACL et clavier Duplicateur de port Station daccueil Coque de charge Batterie Chargeur de batterie Adaptateur secteur et cordon dalimentation Adaptateur automobile et cordon dalimentation Priphriques USB Stylo pointeur standard ou pour numriseur graphique Tous les articles consommables incluant les pellicules protectrices, chiffons de nettoyage, tuis de transport, longes et sangles Un (1) an partir de la date dachat original. Dfauts de pices et de fabrication Quatre-vingt-dix (90) jours partir de la date dachat original. Aucune couverture Dfauts de pices et de fabrication Recours Pour obtenir des informations sur la marche suivre dans le cas o une rclamation en vertu de la garantie deviendrait ncessaire, communiquez par tlphone avec un reprsentant de PCI au 1-800-668-8386, entre 9h00 et 17h00 (heure de lEst) du lundi au vendredi (sauf les jours fris), avant lchance de la garantie applicable, en prenant soin didentifier la nature de la dfaillance. Un reu ou toute autre pice justificative de la date dachat original sera exig avant toute rparation. Toute pice dfectueuse couverte par la prsente garantie limite sera rpare ou remplace par une pice neuve ou remise neuf. Le remplacement ou la rparation sera fait conformment aux modalits de la prsente garantie limite pendant la dure restante de la priode originale de la garantie. Produits non couverts La prsente garantie limite ne couvre pas les produits achets lextrieur du Canada. Elle ne couvre pas non plus les dommages, la dfaillance ou les dfauts attribuables une manutention inadquate, une mauvaise installation, une utilisation anormale ou abusive, de la ngligence, un accident, un dversement ou la pntration dun objet tranger, une modification, un cas fortuit ou une rparation effectue par une personne non agre par PCI. CE PRODUIT NEST PAS DESTIN TRE UTILIS, EN TOUT OU EN PARTIE, COMME SYSTME/

QUIPEMENT NUCLAIRE, SYSTME/QUIPEMENT DE CONTRLE DU TRAFFIC ARIEN OU SYSTME/QUIPEMENT DE POSTE DE PILOTAGE DAVION*1. PANASONIC DCLINE TOUTE 82 Operating Instructions - Reference Manual Appendix RESPONSABILIT CONCERNANT LUTILISATION DE CE PRODUIT DANS LES CAS SUSMENTIONNS.

*1 Les SYSTMES/QUIPEMENTS DE POSTE DE PILOTAGE DAVION sont dots de systmes OEPP (organiseur lectronique de poste de pilotage) de classe 2 et de classe 1 utiliss pendant des phases critiques de vol (par exemple, pendant le dcollage et latterrissage) et(ou) monts sur lavion. Les systmes OEPP de classe 1 et de classe 2 sont dfinis par le circulaire dinformation FAA : AC (Advisory Circular) 120-76A ou le feuillet JAA : JAA TGL (Temporary Guidance Leaflets) No 36. EXPDITION DU PRODUIT POUR SERVICE SOUS GARANTIE Emballez soigneusement le produit, de prfrence dans son emballage dorigine. Joignez une description de la dfaillance de mme quune pice justificative de la date dachat. Panasonic Canada Inc. ne peut tre tenue responsable pour tout dommage ou perte subi pendant le transport si vous avez choisi le transporteur. GARANTIE LIMITE SUPPORTS DES LOGICIELS Couverture Panasonic Canada Inc. ( PCI ) garantit lacheteur original que le ou les disques ou tout autre support sur lequel le ou les programmes sont fournis sont exempts de dfauts de pices et de fabrication dans des conditions normales dutilisation au Canada, et ce, pour une priode de soixante (60) jours suivant la date de rception indique sur la preuve dachat. LA PRSENTE GARANTIE EST LA SEULE OFFERTE PAR PCI COUVRANT LES SUPPORTS DE LOGICIELS. PCI ne garantit pas les logiciels. Reportez-vous la garantie crite du concdant de licence dutilisation du logiciel (qui accompagne la copie du logiciel) pour toute rclamation en vertu de la garantie. Rclamation marche suivre Panasonic Canada Inc. remplacera tout disque ou support dfectueux si larticle en question est retourn, port pay, son service de Marketing produits informatiques, 5770 Ambler Drive, Mississauga (Ontario) L4W 2T3, dans les soixante (60) jours suivant la date dachat original. Joignez votre envoi une pice justificative de votre achat et une description du problme. Recours La responsabilit de PCI - et votre seul recours - dans le cas de toute dfaillance couverte par la garantie sur ce support de logiciel est limite au seul remplacement du support. Elle ne couvre aucun autre dommage, y compris, mais non exclusivement, la perte dusage ou de profits, ni aucun dommage spcial, indirect ou conscutif, ni aucune autre rclamation de nature similaire ou autre. Produits non couverts La prsente garantie limite ne sapplique pas si le ou les disques ou autre support ont t utiliss dans un produit dune marque autre que Panasonic ou dans des conditions environnementales autres que celles spcifies par PCI ou le fabricant, ou soumis une mauvaise utilisation, la ngligence, une manutention inadquate ou encore si le programme a t modifi ou subi une tentative de modification ou des dommages attribuables un accident ou un cas fortuit. De plus, PCI nassume aucune responsabilit pour toute perte de, ou tout dommage , un programme, des donnes ou un support de sauvegarde amovible. GNRALITS PCI NE RECONNAT AUCUNE AUTRE GARANTIE, EXPLICITE OU IMPLICITE, Y COMPRIS, MAIS NON EXCLUSIVEMENT, LES GARANTIES IMPLICITES DE VALEUR COMMERCIALE ET DUTILIT UNE FIN QUELCONQUE, LGARD DU LOGICIEL, SUPPORTS DE LOGICIELS, PRODUITS INFORMATIQUES, PRIPHRIQUES ET ACCESSOIRES. SOUS AUCUNE CIRCONSTANCE PCI NE POURRA TRE TENUE RESPONSABLE DES DOMMAGES SPCIAUX, INDIRECTS OU CONSCUTIFS ATTRIBUABLES UN MANQUEMENT AUX GARANTIES LIMITES DCRITES DANS LE PRSENT DOCUMENT OU LUTILISATION DU PRODUIT INFORMATIQUE, Y COMPRIS, SANS RESTRICTION, LA PERTE DE DONNES, DAFFAIRES, DACHALANDAGE OU DE PROFIT. DANS TOUS LES CAS, LA RESPONSABILIT MAXIMALE DE PCI POUR TOUT MANQUEMENT NE POURRA EXCDER LE PRIX DE VENTE DU PRODUIT INFORMATIQUE. AUCUNE RCLAMATION, SANS GARD SES MOTIFS, NE POURRA TRE FAITE AUPRS DE PCI PLUS DE DEUX (2) ANS APRS LES FAITS INVOQUS LA BASE DUNE TELLE RCLAMATION. Garantie statutaires Certaines juridictions interdisent de telles limitations ou exclusions ; aussi, pourraient-elles ne pas sappliquer. Operating Instructions - Reference Manual 83 Appendix WARRANTY for Europe Panasonic System Communications Company Europe (referred to as "Panasonic") will repair this product

(other than software, which is treated in a different section of this warranty) with new or refurbished parts, from the date of original purchase in the event of a defect in materials or workmanship. This warranty only applies to new Panasonic Toughbooks or Toughpads purchased in the EEA and Switzerland and Turkey. Panasonic (or its authorised Service Provider) target to repair your equipment within 48 hours from its receipt in our service centre. Additional charges may apply for shipment to countries outside of the European Union. Panasonic will use all reasonable endeavours to ensure this service. This warranty only covers failures due to defects in materials or workmanship which occur during normal use for the applicable Service Agreement Period listed below. In the event that any product (or part thereof) is replaced, Panasonic shall transfer ownership of the replacement product (or part) to the customer and the customer shall transfer ownership of the replaced product (or part) to Panasonic. Service Agreement Period - from original date of purchase Toughbooks (and every accessory included in the original packaging except the battery) - 3 years Toughpads (and every accessory included in the original packaging except the battery) - 3 years Additional peripherals manufactured by Panasonic (AC Adaptor and Power Cord, Car Adaptor and Power Cord, Cradle, Battery Charger) - 1 year Batteries - 6 months. Panasonic Warranty covers the battery for six months. A battery is considered good if it maintains 50 % of its charge capacity during the warranty period. If a battery is returned under this contract and testing determines that it has charge capacity greater than 50 %, the battery will be returned with an invoice for the retail purchase price of a new battery. This warranty is extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required before warranty performance is rendered. Limits and Exclusions:

This warranty does not cover and shall be void for:

Broken or cracked LCD screen. Defective pixel in notebook displays and LCD screens within 0.002 %

Damage that is attributable to fire, theft or acts of God. Damage caused by environmental influences (electrical storms, magnetic fields etc.). Damage which has not been caused during normal operation Repair of damage that is cosmetic only or does not affect product functionality such as wear and tear, scratches and dents. Failures caused by products not supplied by Panasonic. Failures resulting from alteration, accidental damage, casualty, misuse, abuse or neglect. Introduction of liquid or other foreign matter into the unit. Improper installation, operation or maintenance. Improper connections with peripherals. Maladjustment of consumer controls such as function settings. Modification or service by anyone other than Panasonic or its approved Service Providers. Products used as short term rental or leased equipment. Products whose serial number has been removed making the unit warranty condition impossible to clearly determine. THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES. There are no other express warranties except as listed above. 84 Operating Instructions - Reference Manual Appendix We strongly recommend that customers backup their data before sending back their unit to an Authorised Service Provider. Panasonic shall not be liable for loss of data or other incidental or consequential damages resulting from the use of this product, or arising out of any breach of this warranty. All express and implied warranties, including the warranties of satisfactory quality and fitness for a particular purpose are limited to the applicable warranty period set forth above. Panasonic shall not be liable for any indirect, special or consequential loss or damage (including without limitation any loss of profits) arising from the use of this product or for any breach of this warranty. This limited warranty gives you specific legal rights, and you may have other rights that vary from country to country. You must consult the applicable country laws for a full determination of your rights. This limited warranty is in addition to, and does not affect any rights arising out of any contract of sale or by statute. Panasonic System Communications Company Europe Data Storage Media Data Storage Media is the media on which the Operating System, drivers and programs originally installed by Panasonic on the main unit are stored. This media is originally provided with the unit. Panasonic warrants to you only that the disc(s) or other media on which the Programs are furnished will be free from defects in material and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof to you, as evidenced by your purchase receipt. This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your requirements or that the operation of the Programs will be uninterrupted or error free. Panasonic's entire liability and your exclusive remedy under this warranty shall be limited to the replacement of any defective disk or other media which is returned to Panasonic's authorized Service Centre, together with a copy of the purchase receipt, within the aforesaid warranty period. Panasonic shall have no obligation for any defects in the disk(s) or other media on which the Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media otherwise than on the Product or in the environment conditions other than those specified by Panasonic by alteration, accident, misuse, abuse, neglect, mishandling, misapplication, installation, maladjustment of consumer controls, improper maintenance, modification or damage that is attributable to acts of God. In addition, Panasonic shall have no obligation for any defects in the disk(s) or other media if you have modified, or attempted to modify any Program. Duration of implied warranties, if any is limited to sixty (60) days. Pre-installed software Pre-installed software means the software shipped pre-loaded by Panasonic, not that loaded by any third party or selling agent. Panasonic and its suppliers makes no warranty, either express, implied or statutory, with respect to software provided with the Product and licensed to Purchaser, its quality, performance, merchantability, or fitness for a particular purpose. Panasonic does not warrant that the functions contained in the software will be uninterrupted or error free. Panasonic assumes no risk of and shall not in any case be liable for any damages, including, without limitation, any special, incidental, consequential, or punitive damages arising from breach of warranty or contract, negligence or any other legal theory, including, without limitation loss of goodwill, profits or revenue, loss of use of the Programs or Products or any associated equipment, cost of capital, cost of any substitute equipment, facilities, or services, downtime costs, or claims of any party dealing with such damages. Some countries do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights and you may also have other rights that vary from country to country. You must consult applicable country laws for a full determination of your rights. Contacts Operating Instructions - Reference Manual 85 Appendix Address Panasonic System Communications Company Europe Panasonic Manufacturing U.K. Ltd. Service Centre Building B4, Wharfedale Road, Pentwyn Industrial Estate, Cardiff, United Kingdom CF23 7XB Web page http://www.toughbook.eu/

Panasonic Helpdesk France:

German:

Austria:

Swiss (German):

Swiss (French):

Italy:

Spain:

UK:

e-mail:

+33(0) 805636449

+49(0) 8007235211

+43(0) 800006493

+41(0) 800002429

+41(0) 800588017

+39 800986915

+34(0) 901101157

+44(0) 8000884324 toughbooksupport@eu.panasonic.com Czech speaking service 0800 143234 (in country only) Hungarian speaking service 06800 163 67 (in country only) Polish speaking service 00800 4911558 (in country only) Romanian speaking service 0800 894 743 (in country only) Slovakian speaking service 00800 42672627 (in country only) toughbooksupport@csg.de e-mail:

Payments toughbookservicepayments.cardiff@eu.panasonic.com 86 Operating Instructions - Reference Manual Panasonic Mobile Communications Co., Ltd. 600 Saedo-cho, Tsuzuki-ku, Yokohama-city, Kanagawa 224-8539, Japan DHQP1024VA/J1 C0718-4050

Operating Instructions Smart Handheld EB-3901 Tablet Computer Model No. FZ-N1 series English Franais Operating Instructions - Read Me First...........................2 Refer to the Reference Manual by downloading from the URL below Instructions dutilisation - Lisez-moi.............................26 Reportez-vous au Manuel de rfrence en le tlchargeant partir de lURL ci-dessous. URL:- https://pc-dl.panasonic.co.jp/itn/manual/

Thank you for purchasing a Panasonic product. Before operating this product, please read these instructions and precautions, and save them for future use. Vous venez dacqurir un produit Panasonic et nous vous en remercions. Avant dutiliser ce produit, veuillez lire les prsentes instructions et prcautions et les conserver pour usage ultrieur. Safety Precautions (English) To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbol word panels Explanation of symbol word panels The following symbol word panels are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed. DANGER Denotes potential hazards that will result in serious injury or death. WARNING Denotes potential hazards that could result in serious injury or death. CAUTION Denotes potential hazards that could result in minor injury. The following symbols are used to classify and describe the type of instructions to be observed. This symbol is used to alert users to specific operating procedures that must not be performed. This symbol is used to alert users to specific operating procedures that must be followed in order to operate the product safely. 2 Battery DANGER The battery is for use solely with this product. Do not use it with any other products. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Charge the battery using the specified method. Failure to do so may result in electrolyte leakage, overheating, smoke, rupture, or a fire. Do not throw the battery into a fire or expose it to excessive heat. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Do not disassemble, modify, or insert sharp foreign objects into the battery. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Do not short the positive (+) and negative () contacts. Do not carry the battery around or store it together with necklaces, hairpins, etc. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Keep the battery away from extreme heat, such as fire and direct sunlight. Failure to do so may result in electrolyte leakage, overheating, smoke, rupture, or a fire. Do not expose the battery to water or other liquids. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Safety Precautions (English) 3 Do not throw the battery or subject it to strong impact such as dropping or applying high pressure. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Stop using the product if the battery is subjected to strong impact or if the battery is noticeably damaged or deformed. If the battery deteriorates, replace it with a new one. Failure to do so may result in electrolyte leakage, overheating, smoke, rupture, or a fire. WARNING Do not directly touch electrolyte that has leaked from the battery. Electrolyte may enter the eyes and cause blindness, or may come into contact with skin or clothing and cause rashes. Flush with clean water without rubbing and seek medical advice. Do not place the battery in microwave ovens or pressurized containers. Sudden application of heat or pressure may damage the battery, resulting in electrolyte leakage, overheating, smoke, rupture, or a fire. If the battery smells or leaks electrolyte, keep the battery away from fire. Failure to do so may result in electrolyte leakage, overheating, smoke, rupture, or a fire. 4 This product and charger WARNING When using the product for extended periods, do not expose your skin to the product for a prolonged period. Generated heat can cause low-temperature burns. Do not disassemble, repair, or modify the product. This may cause the battery to short circuit or overheat, which may result in a fire or electric shock. Do not insert foreign objects into the product. This may cause the battery to short circuit or overheat, which may result in a fire or electric shock. Do not allow conductive materials such as metal objects to touch the expansion bus connector. This may cause a short circuit and overheating, which may result in battery electrolyte leakage, overheating, smoke, rupture, or a fire. Do not place the product in microwave ovens or electromagnetic cookers. Doing so may cause overheating, smoke, or rupture, which may result in a fire. Do not touch the product or charger during lightning storms if the product is connected to a charger. There is a remote chance of electric shock. Safety Precautions (English) 5 Do not turn the volume up too loud when using headphones, etc. Listening at high volumes for extended periods may result in loss of hearing. Also, turn down the volume before connecting headphones, etc. to prevent sudden loud sounds. Keep SD cards and SIM cards out of the reach of infants and small children. Small objects are suffocation and choking hazards. In the event of accidental swallowing, seek medical help immediately. Do not operate the product while walking, driving, riding a bicycle, etc. Being distracted while engaging in these kinds of activities can cause accidents or falls. Do not use headphones, etc. while driving or in potentially dangerous areas or situations. Your inability to hear the sounds around you can cause accidents. Take special care at rail crossings, station platforms, roads, construction sites, etc. Use only specified batteries. Use of unspecified batteries may result in electrolyte leakage, overheating, smoke, rupture, or a fire. 6 Immediately stop using the product if any of the following occurs. Product is damaged Water or foreign objects enter the product Product emits smoke Product emits unusual smell or sound Product becomes unusually hot Continuing use may result in a fire or electric shock. Immediately turn the product off, disconnect it from the power supply, remove the battery, and then contact your technical support representative. Close the headset jack cover and interface cover when using the product near water or other liquids, and in areas with a high concentration of moisture, steam, dust, oily vapors, etc. Foreign material that enters the product may cause fire or electric shock. If foreign material enters the product, turn the product off, disconnect it from the power supply, and then remove the battery. Contact your technical support representative for support or repair. Stop using the product immediately and consult your doctor if you feel any discomfort when staring at flashing lights on the screen. A very small percentage of individuals may experience seizures or blackouts when exposed to certain light patterns or flashing lights for extended periods. Do not use the product near automatic control equipment such as automatic doors, fire alarms, etc. RF signals generated by the product may interfere with the proper operation of such equipment. Safety Precautions (English) 7 CAUTION Do not leave the product in areas with a high concentration of moisture, steam, dust, oily vapors, etc. for extended periods. Foreign material that enters the product may cause a fire or electric shock. Do not move the product while the charger is connected. This may result in a fire or electric shock. Make sure not to charge the product when it is wet. This may result in a fire or electric shock. Do not leave the product in extremely high temperature environments for an extended period. Leaving the product where it will be exposed to extremely high temperatures, such as near fire or in direct sunlight, may deform the product or cause damage or malfunction to its internal components. Using the product in these conditions may cause short circuit, insulation defects, etc., which may in turn cause a fire or electric shock. Do not expose the skin to the product when using the product in hot or cold environments. Burns, low-temperature burns, or frostbite may result. If direct contact with the skin is necessary, perform the operation as quickly as possible. Do not place the product on an unstable surface. The product may drop, resulting in an injury. Do not stack the product. If balance is lost, the product may fall over or drop, resulting in an injury. 8 Do not look directly at the light emitter or point the flash at another person's eyes. This may damage the eyes or cause temporary loss of eyesight which could result in an accident. Keep away from magnetic sources such as watches and magnetic cards. Failure to do so may cause data corruption or device malfunction. Do not expose the camera lens to direct sunlight for extended periods. This may result in a fire, burns, or injury due to the converging effect of the lens. For safety purposes, pull the plug when cleaning the product or if you will not use it for extended periods. Failure to do so may result in a fire or electric shock. If a part such as the display is damaged, be careful of broken glass or internal components that may become exposed. Failure to do so can cause injury. Take a 1015 minute break every hour when using the product. Using the product continuously for extended periods may cause strain injuries and may have detrimental health effects on your eyes, hands, or other parts of your body. Safety Precautions (English) 9 Regulatory Information (English) This product and your health This product and your health This product, like other radio devices, emits radio frequency electromagnetic energy. Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:

Using this product on board of airplanes, or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product. Information to the user Information to the user We are not responsible for any radio or television interference caused by unauthorized modification of this product. The correction of interference caused by such unauthorized modification will be the responsibility of the user. We and our authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. 10 Additional safety precautions Additional safety precautions Posted facilities Turn off the product when in hospitals, health care facilities, or any facility where posted notices require you to do so. Hospitals and health care facilities may be using equipment that could be sensitive to external RF energy. Pacemakers Medical device manufacturers recommend a minimum separation of 15 cm between a wireless device and an implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid potential interference with the medical device. Persons with pacemakers:

Should ALWAYS keep this product more than 15 cm from their pacemaker when this product is turned ON;

Should use the ear opposite the pacemaker to minimize the potential for interference;

Should not carry this product in a breast pocket;

Should turn off the product immediately if there is any reason to suspect that interference is taking place. Hearing aids Some digital wireless products may interfere with some hearing aids. In the event of such interference, consult the manufacturer of your hearing aid to discuss alternatives. Other medical devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Regulatory Information (English) 11 Aircraft Turn off the product after boarding an aircraft, when instructed by flight staff. Obey instructions from flight staff regarding the use of the product in flight. Using this product in an aircraft may be hazardous to the aircrafts operation and disrupt wireless communication, and may also be illegal. Potentially explosive atmosphere Turn off the product in areas where a potentially explosive atmosphere exists and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in injury or even death. Areas with potentially explosive atmosphere may include fueling areas, chemical plants, below deck on boats, fuel or chemical transfer or storage facilities, vehicles using petroleum or natural gas, or areas where the atmosphere contains particles such as grain, dust, or metallic powders, and any other area where you would normally be advised to turn off your vehicle engine. Electronic devices This product receives and transmits radio frequency signals while switched on. Most electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from this product. Therefore, the use must be restricted in certain situations to avoid interference. Driving Give full attention to driving. Driving safely is your first responsibility. Pull off the road and park before placing or answering a call. It is unsafe to operate the product while driving. Check the laws and regulations in the areas where you drive, and always obey them. 12 Only qualified personnel should install the product in a vehicle. Check regularly that the product is securely mounted in your vehicle and operating properly. Do not place or install the product in the area over the air bag or in the air bag deployment area. If the air bag inflates, serious injury and/or damage could result. RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Consult the manufacturer (or its representative) of the vehicle and any equipment that has been added to the vehicle regarding the use of mobile products. Use hands-free operation, if available and legally permitted. Emergency communications Never rely solely on a mobile product for essential or emergency communications. Network connections can be affected by remaining battery level, radio signals, service networks, and other conditions, and as a result, emergency communications cannot be guaranteed in all conditions. Antenna Do not replace the antenna. Unauthorized antennas, modifications, or attachments could damage the product and may violate regulations. Do not touch or cover the antenna area while the product is on. Call quality, power levels, and the overall performance of the product may be affected. Volume Do not turn the volume up too loud when using headphones and earphones. Exposure to excessive sound pressure levels for extended periods may cause hearing damage. Being unable to hear sounds in your environment may lead to accidents. Regulatory Information (English) 13 Intended use Intended use This product is not intended for use as, or as part of, nuclear equipment/systems, air traffic control equipment/systems, aircraft cockpit equipment/systems*1, medical devices or accessories*2, life-support systems or other equipment/devices/systems that are involved with ensuring human life or safety. Panasonic will not be responsible for any liability resulting from the use of this product arising out of the foregoing uses.

*1 Aircraft cockpit equipment/systems include Class 2 Electrical Flight Bag (EFB) Systems and Class 1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class 1 EFB Systems and 2 EFB Systems are defined by FAA: AC

(Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36.

*2 As defined by the European Medical Device Directive (MDD) 93/42/EEC. Panasonic cannot guarantee any specifications, technologies, reliability, safety (e.g., Flammability/Smoke/Toxicity/Radio Frequency Emission, etc.) requirements related to aviation standards and medical equipment standards that differ from the specifications of our COTS (Commercial-Off-The-Shelf) products. This product is not intended for use in medical equipment including life-support systems, air traffic control systems, or other equipment, devices or systems that are involved with ensuring human life or safety. Panasonic cannot be held responsible in any way for any damages or loss resulting from the use of this unit in these types of equipment, devices or systems, etc. This product has been designed so as to minimize shock to the LCD, the leakage of liquid

(e.g., water) on to the buttons, etc., but no warranty is provided against such trouble. Therefore, as a precision instrument, be extremely careful in the handling of the product. 14 For USA For USA FCC Part 15 information This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. Increase the separation between the product and receiver. Connect the product to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC caution To assure continued FCC emission limit compliance, use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Regulatory Information (English) 15 FCC RF exposure information This product meets the governments requirements for exposure to radio waves. This product is a radio transmitter and receiver. This product is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this product can be found under Reference Manual of https://pc-dl.panasonic.co.jp/itn/manual/

For body-worn operation, this product has been tested and meets FCC RF exposure guidelines when used with a Panasonic accessory designated for this product and when used with an accessory that contains no metal and that positions the mobile device a minimum of 1.0 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The FCC has granted an Equipment Authorization for this product with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this product is on file with the FCC and can be found by searching for the products FCC ID number at http://www.fcc.gov/oet/ea/fccid. To find the FCC ID number for your product, first remove the battery pack. The FCC ID number is printed on the nameplate underneath. 16 Wi-Fi use High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product. Do not use in the vicinity of these high power radar systems. Using hearing aids with mobile devices When some wireless mobile devices are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and mobile devices also vary in the amount of interference they generate. In the event of interference you may want to consult your hearing aid supplier to discuss solutions. The wireless telephone industry has developed ratings for some of their mobile devices, to assist hearing device users in finding mobile devices that may be compatible with their hearing devices. Not all mobile devices have been rated. Mobile devices that are rated have the rating on their box or label located on the box. The ratings are not guarantees. Results will vary depending on the users hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated mobile device successfully. Trying out the mobile device with your hearing device is the best way to evaluate it for your personal needs. M-Ratings: Mobile devices rated M3 or M4 are likely to generate less interference to hearing devices than mobile devices that are not labeled. M4 is the better/higher of the two ratings. T-Ratings: Mobile devices rated T3 or T4 are likely to be more usable with a hearing devices telecoil (T-Coil Switch or Telephone Switch) than unrated mobile devices. T4 is the better/higher of the two ratings.

(Note that the hearing aid telecoil must be activated in order for it to function, and that not all hearing devices have telecoils in them.) Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device. The Regulatory Information (English) 17 more immune your hearing aid is, the less likely you are to experience interference noise from mobile devices. The HAC rating and measurement procedure are described in the American National Standards Institute (ANSI) C63.19 standard. Hearing aid compatibility This mobile device has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this mobile device that have not been tested yet for use with hearing aids. It is important to try the different features of this mobile device thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this mobile device for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or mobile retailer. Responsible party Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102, USA Support contact:

http://business.panasonic.com/support-computerstablets Disposal USA Only: Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website:

https://www.panasonic.com/us/corporate/sustainability/eco.html or call 1-888-769-0149. TTY information For hearing or speech impaired TTY users, call 1-877-833-8855 using a TTY device. 18 For Canada For Canada Innovation, Science and Economic Development Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Wi-Fi use This product (local network devices) for the band 5150-5250 MHz is only indoor usage to reduce potential for harmful interference to cochannel Mobile Satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-

5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN (licence-exempt local area network) devices. RF exposure information This product complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. This product is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency

(RF) energy set by Industry Canada. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by Industry Canada is 1.6 W/kg. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by Industry Canada for each model. Regulatory Information (English) 19 The highest SAR value for this product can be found under Reference Manual of https://pc-dl.panasonic.co.jp/itn/manual/

For body-worn operation, this product has been tested and meets the RF exposure guidelines when used with a Panasonic accessory designated for this product and when used with an accessory that contains no metal and that positions the mobile device a minimum of 1.0 cm from the body. Use of other accessories may not ensure compliance with the RF exposure guidelines. 20 General information General information CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Recycle information A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Explanation of graphical symbols on nameplate

: Alternating current

: Direct current

: Class II equipment Regulatory Information (English) 21 Trademark and License Information

(English) Trademarks The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. microSDXC Logo is a trademark of SD-3C, LLC. The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Android and Google are trademarks of Google LLC. Wi-Fi, the Wi-Fi logo, the Wi-Fi CERTIFIED logo and Wi-Fi CERTIFIED are trademarks or registered trademarks of Wi-Fi Alliance. All other trademarks identified herein are the property of their respective owners. License information This product is licensed under the MPEG-4 Visual patent portfolio license for the personal and non-commercial use of a consumer for

(i) encoding video in compliance with the MPEG-4 Visual Standard

(MPEG-4 Video) and/or

(ii) decoding MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed by MPEG LA to provide MPEG-4 Video. No license is granted or shall be implied for any other use. 22 Additional information including that relating to promotional, internal and commercial uses and licensing may be obtained from MPEG LA, LLC. See http://www.mpegla.com. This product is licensed under the AVC patent portfolio license for the personal use of a consumer or other uses in which it does not receive remuneration to

(i) encode video in compliance with the AVC Standard (AVC Video) and/or

(ii) decode AVC Video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com. This product contains software licensed in compliance with GNU General Public License Version 2.0 (GPL v2.0), GNU Lesser General Public License (LGPL) or any other license. The program is free software; you can copy it, redistribute it, and modify it under the terms of the GPL v2.0, LGPL or any other license. At least three (3) years from delivery of products, Panasonic Mobile Communications Co., Ltd. will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL v2.0 and LGPL or any other license. Contact Information oss-cd-request@gg.jp.panasonic.com Source code is also freely available to the public via the web site listed below. https://panasonic.net/cns/oss/index.html Please note that we cannot respond to any inquiries regarding the source code. Trademark and License Information (English) 23 For more details on the relevant software (including license information of GPL v2.0 and LGPL), refer to the information displayed on the following screen: swipe up the home screen, and then in the app list, tap [Settings] [About tablet]

[Legal information]. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.

(http://www.openssl.org/source/license.html) This product includes the Independent JPEG Group's software. This software is based in part on the work of the Independent JPEG Group. This software is based in part on the work of FreeType Project. This product includes the following software; ICU 1.8.1 and later Copyright (c) 1995-2011 International Business Machines Corporation and others. This product includes other free software or open source software. For more details on the relevant software (including license information), refer to the information displayed on the following screen: swipe up the home screen, and then in the app list, tap

[Settings] [About tablet] [Legal information]. TouchSense Technology licensed from Immersion Corporation. TouchSense and other Immersion software contained herein are protected under one or more of the U.S. Patents found at the following address www.immersion.com/patent-marking.html and other patents pending. 24 Accessories (English) For the latest information about optional products, refer to the product catalogs, etc. Product name Model number AC Adaptor CF-AA6413A FZ-AAE184EM Battery Pack FZ-VZSUN110U Cradle FZ-VEBN111 Charging Cup FZ-VCBN11U Active Pen FZ-VNPN11U Protective Film

(10 sheets) FZ-VPF series 5-Bay Cradle FZ-VEBN141 5-Bay Battery Charger FZ-VCBN131 5-Bay Charge only Cradle FZ-VCBN141 Accessories (English) 25 Prcautions de scurit (Franais) Pour rduire le risque de blessure, de dcs, de dcharge lectrique, dincendie, de dysfonctionnement et de dommages au niveau de lquipement et des biens, respectez toujours les consignes de scurit suivantes. Explication des symboles Explication des symboles Les symboles suivants sont utiliss pour classer et dcrire le niveau de danger, de blessures et de dommages matriels causs si les consignes indiques ne sont pas respectes et si le produit est utilis de manire incorrecte. DANGER AVERTISSEMENT ATTENTION Indique un danger potentiel qui provoquera des blessures graves, voire la mort. Indique un danger potentiel qui pourrait provoquer des blessures graves, voire la mort. Indique un danger potentiel qui pourrait provoquer des blessures mineures. Les symboles suivants sont utiliss pour classer et dcrire le type dinstructions suivre. Ce symbole est utilis pour attirer lattention des utilisateurs sur des procdures spcifiques qui ne doivent pas tre effectues. Ce symbole est utilis pour attirer lattention des utilisateurs sur des procdures spcifiques qui doivent tre effectues pour utiliser le produit en toute scurit. 26 Batterie DANGER La batterie doit uniquement tre utilise avec ce produit. Ne lutilisez pas avec dautres produits. Cela pourrait entraner une fuite dlectrolyte, une surchauffe, de la fume, une rupture ou un incendie. Chargez la batterie en suivant la mthode indique. Le non-respect de cette consigne peut entraner une fuite dlectrolyte, une surchauffe, de la fume, une rupture ou un incendie. Ne jetez pas la batterie au feu et ne lexposez pas une chaleur excessive. Cela pourrait entraner une fuite dlectrolyte, une surchauffe, de la fume, une rupture ou un incendie. Ne dmontez pas, ne modifiez pas et ninsrez pas de corps trangers tranchants dans la batterie. Cela pourrait entraner une fuite dlectrolyte, une surchauffe, de la fume, une rupture ou un incendie. Ne court-circuitez pas les bornes positive (+) et ngative (). Ne transportez pas et ne stockez pas la batterie avec des colliers, des pingles cheveux, etc. Cela pourrait entraner une fuite dlectrolyte, une surchauffe, de la fume, une rupture ou un incendie. Tenez la batterie loigne de la chaleur extrme (feu ou lumire directe du soleil, par exemple). Le non-respect de cette consigne peut entraner une fuite dlectrolyte, une surchauffe, de la fume, une rupture ou un incendie. Nexposez pas la batterie de leau ou dautres liquides. Cela pourrait entraner une fuite dlectrolyte, une surchauffe, de la fume, une rupture ou un incendie. Prcautions de scurit (Franais) 27 Ne jetez pas la batterie et ne la soumettez pas des impacts violents en la faisant tomber ou en exerant une forte pression, par exemple. Cela pourrait entraner une fuite dlectrolyte, une surchauffe, de la fume, une rupture ou un incendie. Cessez dutiliser le produit si la batterie a t soumise un impact violent ou si elle est endommage ou dforme de manire visible. Si la batterie est endommage, remplacez-la par une neuve. Le non-respect de cette consigne peut entraner une fuite dlectrolyte, une surchauffe, de la fume, une rupture ou un incendie. AVERTISSEMENT Ne touchez pas directement llectrolyte qui fuit de la batterie. Llectrolyte peut pntrer dans les yeux et entraner la ccit ou peut entrer en contact avec la peau ou les vtements et causer des ruptions cutanes. Rincez leau claire sans frotter et consultez un mdecin. Ne placez pas la batterie dans un four micro-ondes ou un rcipient sous pression. Lapplication soudaine de chaleur ou de pression peut endommager la batterie, ce qui peut entraner une fuite dlectrolyte, une surchauffe, de la fume, une rupture ou un incendie. Si la batterie dgage une odeur ou en cas de fuite dlectrolyte, tenez la batterie loigne du feu. Le non-respect de cette consigne peut entraner une fuite dlectrolyte, une surchauffe, de la fume, une rupture ou un incendie. 28 Ce produit et ce chargeur AVERTISSEMENT Lors de lutilisation du produit pendant des priodes de temps prolonges, nexposez pas votre peau au produit. La chaleur gnre peut causer des brlures basse temprature. Veillez ne pas dmonter, rparer ou modifier le produit. Cela peut causer un court-circuit ou une surchauffe de la batterie, qui peut entraner un incendie ou une dcharge lectrique. Ninsrez pas de corps trangers dans le produit. Cela peut causer un court-circuit ou une surchauffe de la batterie, qui peut entraner un incendie ou une dcharge lectrique. Ne laissez pas de matriaux conducteurs tels que des objets en mtal entrer en contact avec le connecteur du bus dextension. Cela peut causer un court-circuit et une surchauffe, ce qui peut entraner une fuite dlectrolyte de la batterie, une surchauffe, de la fume, une rupture ou un incendie. Ne placez pas le produit dans un four micro-ondes ou un cuiseur lectromagntique. Cela peut causer une surchauffe, de la fume ou une rupture, ce qui peut entraner un incendie. Ne touchez pas au produit ou au chargeur en cas dorage si le produit est connect un chargeur. Il y a un risque minime de dcharge lectrique. Prcautions de scurit (Franais) 29 Ne rglez pas le volume sur un niveau trop lev lors de lutilisation dun casque, etc. Lcoute volume lev pendant des priodes prolonges peut entraner une perte de laudition. De mme, baissez le volume avant de connecter un casque, etc. de manire viter les sons bruyants soudains. Gardez les cartes SD et SIM hors de porte des nourrissons et des jeunes enfants. Les petits objets peuvent entraner la suffocation et lasphyxie. En cas dingestion accidentelle, consultez immdiatement un mdecin. Nutilisez pas le produit en marchant, en conduisant, vlo, etc. Le manque dattention lors de telles activits peut causer des accidents ou des chutes. Nutilisez pas le casque, etc. en conduisant ou dans des situations ou des lieux potentiellement dangereux. Le fait de ne pas pouvoir entendre les sons gnrs autour de vous peut causer des accidents. Faites particulirement attention au niveau des passages niveau, des quais de gare, des routes, des chantiers de construction, etc. Utilisez uniquement les batteries indiques. Lutilisation de batteries non indiques peut entraner une fuite dlectrolyte, une surchauffe, de la fume, une rupture ou un incendie. 30 Cessez immdiatement dutiliser le produit si lun des vnements suivants survient. Le produit est endommag. De leau ou des corps trangers ont pntr dans le produit. Le produit met de la fume. Le produit met une odeur ou un bruit inhabituel. Le produit devient excessivement chaud. Le fait de continuer utiliser le produit peut entraner un incendie ou une dcharge lectrique. teignez immdiatement le produit, dbranchez-le de la prise lectrique, retirez la batterie, puis contactez le reprsentant de lassistance technique. Fermez le cache de la prise pour casque et le cache de linterface lors de lutilisation du produit proximit de leau ou dautres liquides et dans des lieux avec une forte concentration en humidit, en vapeur deau, en poussire, en vapeurs grasses, etc. La prsence de corps trangers dans le produit peut entraner un incendie ou une dcharge lectrique. Si des corps trangers pntrent dans le produit, teignez le produit, dbranchez-le de la prise lectrique, puis retirez la batterie. Contactez le reprsentant de lassistance technique pour obtenir de laide ou procder des rparations. Cessez immdiatement dutiliser le produit et consultez un mdecin si vous ressentez une gne lorsque vous fixez des lumires clignotantes lcran. Un trs faible pourcentage dindividus peuvent tre sujets des crises ou des voiles noirs lorsquils sont exposs certains motifs lumineux ou certaines lumires clignotantes pendant des priodes prolonges. Nutilisez pas le produit proximit dquipements de contrle automatiques, tels que des portes automatiques, des alarmes incendie, etc. Les signaux RF gnrs par le produit peuvent nuire au bon fonctionnement de ces quipements. Prcautions de scurit (Franais) 31 ATTENTION Ne laissez pas le produit dans des lieux avec une forte concentration en humidit, en vapeur deau, en poussire, en vapeur huileuse, etc. pendant des priodes de temps prolonges. La prsence de corps trangers dans le produit peut entraner un incendie ou une dcharge lectrique. Ne dplacez pas le produit alors que le chargeur est branch. Cela peut entraner un incendie ou une dcharge lectrique. Veillez ne pas charger le produit lorsquil est mouill. Cela peut entraner un incendie ou une dcharge lectrique. Ne laissez pas le produit dans des environnements trs hautes tempratures pendant des priodes de temps prolonges. Lexposition du produit des tempratures extrmement leves

( proximit dun feu ou la lumire directe du soleil, par exemple) peut le dformer ou entraner des dommages ou des dysfonctionnements au niveau de ses composants internes. Lutilisation du produit dans de telles conditions peut entraner un court-circuit, des dfauts disolation, etc., qui peuvent leur tour causer un incendie ou une dcharge lectrique. Nexposez pas la peau au produit lors de lutilisation du produit dans des environnements chauds ou froids. Cela peut entraner des brlures, des brlures faible temprature ou des gelures. Si un contact direct avec la peau est ncessaire, effectuez lopration aussi rapidement que possible. Ne placez pas le produit sur une surface instable. Le produit peut tomber et causer des blessures. 32 Nempilez pas le produit. En cas de perte dquilibre, le produit peut basculer ou tomber et entraner des blessures. Ne regardez pas directement lmetteur lumineux. De mme, norientez pas le flash vers les yeux dune autre personne. Cela peut entraner des lsions oculaires ou une perte temporaire de la vue, ce qui peut causer un accident. Tenez le produit loign des sources magntiques telles que les montres et les cartes magntiques. Le non-respect de cette consigne peut entraner la corruption des donnes ou une anomalie de fonctionnement de lappareil. Nexposez pas lobjectif de la camra la lumire directe du soleil pendant des priodes de temps prolonges. Le non-respect de cette consigne peut entraner un incendie, des brlures ou des blessures en raison de leffet de convergence de lobjectif. Pour des raisons de scurit, dbranchez le produit lors du nettoyage et lorsque vous ne lutilisez pas pendant une priode prolonge. Le non-respect de cette consigne peut entraner un incendie ou une dcharge lectrique. Si un composant tel que lcran est endommag, faites attention au verre cass et aux composants internes qui peuvent tre exposs. Le non-respect de cette consigne peut entraner des blessures. Faites une pause de 10 15 minutes toutes les heures lors de lutilisation du produit. Lutilisation continue du produit pendant des priodes prolonges peut entraner des microtraumatismes ou avoir des effets ngatifs sur vos yeux, vos mains ou dautres parties de votre corps. Prcautions de scurit (Franais) 33 Informations rglementaires (Franais) Ce produit et votre sant Ce produit et votre sant Ce produit met, comme dautres appareils radio, de lnergie lectromagntique radiofrquence. Ce produit fonctionne selon les directives des normes et recommandations de scurit en matire de radiofrquences, nous pensons donc quil peut tre utilis en toute scurit par les consommateurs. Ces normes et recommandations sont le reflet du consensus de la communaut scientifique et rsultent de dlibrations de panels et de commissions de scientifiques qui consultent et interprtent en permanence les nombreux documents de recherche. Dans certaines situations ou dans certains environnements, lutilisation du produit peut tre limite par le propritaire des lieux ou par les reprsentants responsables de lentreprise. Ces situations peuvent inclure :

lutilisation du produit en avion ou dans tout autre environnement o le risque dinterfrences au niveau dautres appareils ou services est peru ou identifi comme tant dangereux. Si vous ntes pas sr de la politique qui sapplique lutilisation dappareils sans fil dans une entreprise ou un environnement spcifique (aroports, par exemple), nous vous prions de bien vouloir demander lautorisation avant dallumer le produit. Avis aux utilisateurs Avis aux utilisateurs Nous ne pouvons tre tenus responsables des interfrences au niveau de la radio ou de la tlvision causes par des modifications non autorises du produit. La correction des interfrences causes par de telles modifications non autorises relve de la responsabilit de lutilisateur. Nous et nos revendeurs et distributeurs agrs ne pouvons tre tenus responsables pour les dommages ou les violations de rglementations gouvernementales qui peuvent survenir dans le cadre du non-respect des prsentes directives. 34 Consignes de scurit complmentaires Consignes de scurit complmentaires Lieux avec affichage teignez le produit dans les hpitaux, les tablissements de soins et tous les lieux o des affiches vous invitent le faire. Il est possible que les hpitaux et les tablissements de soins utilisent des quipements sensibles lnergie RF externe. Stimulateurs cardiaques (pacemakers) Les fabricants dappareils mdicaux recommandent une distance dau moins 15 cm entre un priphrique sans fil et un appareil mdical implant, tel quun stimulateur cardiaque ou un dfibrillateur cardioverteur implant, afin dviter les ventuelles interfrences avec lappareil mdical. Personnes quipes dun stimulateur cardiaque :

Elles doivent TOUJOURS garder le produit plus de 15 cm de leur stimulateur cardiaque lorsque le produit est allum. Elles doivent utiliser loreille oppose au stimulateur cardiaque pour limiter le risque dinterfrences. Elles ne doivent pas transporter le produit dans une poche poitrine. Elles doivent teindre immdiatement le produit si elles ont des raisons de suspecter la prsence dinterfrences. Aides auditives Certains produits sans fil numriques peuvent provoquer des interfrences au niveau de certaines aides auditives. Vous devez alors contacter le fabricant de votre aide auditive pour voquer les alternatives possibles. Autres appareils mdicaux Si vous utilisez dautres appareils mdicaux personnels, contactez le fabricant de lappareil pour dterminer sil est correctement protg contre lnergie RF. Votre mdecin peut vous aider obtenir ces informations. Informations rglementaires (Franais) 35 Avion teignez le produit dans les avions, lorsque le personnel de bord vous invite le faire. Respectez les consignes du personnel de bord concernant lutilisation du produit bord de lavion. Lutilisation du produit dans un avion peut prsenter un danger pour le fonctionnement de lavion, interrompre la communication sans fil et savrer illgale. Atmosphre potentiellement explosive teignez le produit dans les lieux o latmosphre est potentiellement explosive et respectez lensemble des panneaux et des consignes. La prsence dtincelles dans de tels lieux peut entraner une explosion ou un incendie, ce qui peut causer des blessures, voire la mort. Les lieux o latmosphre est potentiellement explosive peuvent inclure les stations-service, les usines chimiques, le pont infrieur des bateaux, les installations de stockage ou de transfert de carburant ou de produits chimiques, les vhicules qui fonctionnent au ptrole ou au gaz naturel ou les lieux o latmosphre contient des particules comme du grain, de la poussire ou des poudres mtalliques et tout autre lieu o il vous est normalement conseill de couper le moteur de votre vhicule. Appareils lectroniques Ce produit reoit et met des signaux radiofrquence lorsquil est allum. La plupart des quipements lectroniques sont protgs contre les signaux RF. Il est cependant possible que certains quipements lectroniques ne soient pas protgs contre les signaux RF de ce produit. Dans certains cas, lutilisation doit donc tre limite pour viter les interfrences. Conduite Faites attention la route lorsque vous conduisez. Conduire en toute scurit est votre premire responsabilit. Garez-vous avant de passer ou de rpondre un appel. Lutilisation du produit alors que vous conduisez prsente un danger. 36 Consultez et respectez toujours les lois et rglementations des zones o vous conduisez. Le produit doit uniquement tre install dans un vhicule par du personnel qualifi. Vrifiez rgulirement que le produit est bien fix dans votre vhicule et quil fonctionne correctement. Vous ne devez pas placer ou installer le produit sur un coussin gonflable ou dans la zone de dploiement dun coussin gonflable. Si le coussin gonflable se dclenche, cela peut entraner des blessures graves et/ou des dommages. Les systmes lectroniques de vhicules motoriss installs de manire incorrecte ou protgs de manire inadapte peuvent tre affects par les signaux RF. Contactez le fabricant du vhicule ou des quipements ajouts au vhicule (ou son reprsentant) au sujet de lutilisation de produits mobiles. Utilisez le mode mains libres, sil est disponible et si la loi lautorise. Communications durgence Ne vous appuyez jamais sur un produit mobile uniquement pour les communications essentielles ou durgence. Les connexions rseau peuvent tre affectes par le niveau de la batterie, les signaux radio, les rseaux de services et dautres facteurs. Les communications durgence ne peuvent donc pas tre garanties dans tous les cas. Antenne Ne remplacez pas lantenne. Les antennes, les modifications ou les accessoires non autoriss peuvent endommager le produit. Vous ne devez pas toucher ou recouvrir la zone de lantenne lorsque le produit est allum. La qualit des appels, les niveaux de puissance et les performances globales du produit peuvent tre affects. Volume Ne rglez pas le volume trop fort lors de lutilisation du casque et des couteurs. Informations rglementaires (Franais) 37 Lexposition des niveaux de pression acoustique excessifs pendant des priodes de temps prolonges peut entraner des dommages auditifs. Lincapacit entendre les bruits ambiants peut entraner des accidents. Usage prvu Usage prvu Ce produit nest pas conu pour tre utilis en tant que ou dans le cadre dquipements/systmes nuclaires, dquipements/systmes de contrle du trafic arien, dquipements/systmes utiliss dans les cockpits davions*1, dappareils ou accessoires mdicaux*2, de moyens dentretien artificiel de la vie ou dautres quipements/appareils/

systmes utiliss pour maintenir la vie humaine ou pour assurer la scurit. La socit Panasonic ne peut tre tenue responsable en cas dutilisation du produit non conforme lusage prvu.

*1 Les SYSTMES/QUIPEMENTS DE POSTE DE PILOTAGE DAVION sont dots de systmes OEPP (organiseur lectronique de poste de pilotage) de classe 2 et de classe 1 utiliss pendant des phases critiques de vol (par exemple, pendant le dcollage et latterrissage) et(ou) monts sur lavion. Les systmes OEPP de classe 1 et de classe 2 sont dfinis par le circulaire dinformation FAA : AC (Advisory Circular) 120-76A ou le feuillet JAA : JAA TGL (Temporary Guidance Leaflets) No 36.

*2 Comme indiqu dans la directive europenne portant sur les dispositifs mdicaux 93/42/CEE. Panasonic ne peut garantir les exigences en matire de spcifications, de technologies, de fiabilit, de scurit (exigences en matire dinflammabilit/de fume/de toxicit/dmissions radiofrquence, etc.) des normes de laviation et des quipements mdicaux qui ne correspondent pas aux spcifications de nos produits COTS (disponibles sur le march). Ce produit nest pas conu pour tre utilis dans des quipements mdicaux, dont des moyens dentretien artificiel de la vie, des systmes de contrle du trafic arien ou dautres quipements, 38 appareils ou systmes utiliss pour maintenir la vie humaine ou pour assurer la scurit. La socit Panasonic ne peut en aucun cas tre tenue responsable des dommages ou des pertes rsultant de lutilisation du produit dans ces types dquipements, dappareils ou de systmes, etc. Ce produit a t conu pour limiter les chocs au niveau de lcran LCD, la fuite de liquides (eau, etc.) sur les boutons, etc., mais ces problmes ne sont en aucun cas exclus. Par consquent, vous devez tre extrmement prudent lorsque vous manipulez le produit, qui est un instrument de prcision. Pour le Canada Pour le Canada Innovation, Sciences et Dveloppement conomique Canada Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) lappareil ne doit pas produire de brouillage, et

(2) lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Utilisation Wi-Fi Ce produit (appareils pour rseaux locaux) pour les bandes de frquences 5 150-5 250 MHz est rserv une utilisation lintrieur afin de rduire le risque dinterfrence avec les systmes satellites mobiles utilisant les mmes canaux. Les radars forte puissance sont dsigns comme tant les premiers utilisateurs (cest--dire quils ont la priorit) des bandes de frquences 5 250-5 350 MHz et 5 650-5 850 MHz. Ces radars peuvent provoquer des interfrences et/ou des dommages aux dispositifs LAN-EL (rseaux locaux exempts de licence). Information sur lexposition aux radiofrquences (RF) Ce produit est conforme aux limites dexposition dIndustrie Canada tablies pour un environnement non contrl. Ce produit est un metteur-rcepteur radio. Il a t conu et fabriqu de faon ne pas dpasser les limites dmission tablies par Industrie Canada pour lexposition lnergie des radiofrquences (RF). Informations rglementaires (Franais) 39 Ces directives sont fondes sur des normes labores par des organisations scientifiques indpendantes au moyen dune valuation priodique et rigoureuse dtudes scientifiques. Ces normes comprennent une marge de scurit substantielle conue pour assurer la scurit de toutes les personnes, quel que soit leur ge ou leur tat de sant. La norme dexposition pour les combins sans fil utilise une unit de mesure appele dbit dabsorption spcifique ou DAS. La limite DAS fixe par Industrie Canada est de 1,6 W/kg. Les essais portant sur le DAS sont effectus en utilisant les positions et les emplacements dutilisation (par ex. au niveau de loreille et port au niveau du corps) spcifis par Industrie Canada pour chaque modle. Les valeurs de DAS les plus leves obtenues pour ce produit se trouvent dans le Manuel de rfrence ladresse https://pc-dl.panasonic.co.jp/itn/manual/

Pour lutilisation lorsque lappareil est port sur soi, ce produit a t test et dclar conforme aux directives dexposition aux radiofrquences (RF) dans le cas dune utilisation avec un accessoire Panasonic conu pour ce produit et dans le cas dune utilisation avec un accessoire ne contenant pas de mtal et qui maintient lappareil mobile une distance dau moins 1,0 cm du corps. En cas dutilisation avec dautres accessoires, il est possible que la conformit aux directives dexposition aux radiofrquences

(RF) ne soit pas assure. 40 Informations gnrales Informations gnrales ATTENTION Il y a risque dexplosion si la batterie est remplace par une batterie de type incorrect. Mettre au rebut les batteries usages conformment aux instructions. Informations de recyclage Lappareil que vous vous tes procur est aliment par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY. Explications relatives aux symboles graphiques prsents sur la plaque signaltique

: courant alternatif

: courant continu

: quipement de classe II Informations rglementaires (Franais) 41 Informations relatives aux marques commerciales et aux licences (Franais) Si les informations relatives aux licences en langue franaise ci-dessous ne vous semblent pas claires, veuillez considrer en priorit les informations relatives aux licences que vous trouverez dans le mode demploi anglais. Marques commerciales La marque et les logos Bluetooth sont des marques commerciales dposes de Bluetooth SIG, Inc. et toute utilisation de ces marques par Panasonic Corporation est soumise une licence. Tous les autres noms de marque ou marques commerciales appartiennent leurs propritaires respectifs. Le logo microSDXC est une marque commerciale de SD-3C, LLC. N-Mark est une marque commerciale, dpose ou non, de NFC Forum, Inc. aux tats-Unis et dans dautres pays. Android et Google sont des marques de Google LLC. Wi-Fi, le logo Wi-Fi, le logo Wi-Fi CERTIFIED et Wi-Fi CERTIFIED sont des marques commerciales, dposes ou non, de Wi-Fi Alliance. Les autres marques commerciales indiques dans le prsent document sont la proprit de leurs dtenteurs respectifs. Informations relatives aux licences Ce produit est concd en licence au titre du contrat de licence de portefeuille de brevets MPEG-4 Visual pour lusage personnel et non commercial du consommateur aux fins

(i) de lencodage vido en conformit avec la norme MPEG-4 Visual (vido MPEG-4) et/ou 42

(ii) du dcodage de vidos MPEG-4 encodes par un consommateur dans le cadre dun usage personnel et non commercial et/ou fournies par un fournisseur de vido autoris par MPEG LA fournir des vidos MPEG-4. Aucune licence nest concde titre exprs ou implicite pour tout autre usage que ce soit. Des informations complmentaires, notamment celles relatives aux usages promotionnels, internes et commerciaux, peuvent tre obtenues auprs de MPEG LA, LLC. Voir http://www.mpegla.com. Ce produit est concd en licence au titre du contrat de licence de portefeuille de brevets AVC pour lusage personnel et non rmunr du consommateur aux fins

(i) de lencodage vido en conformit avec la norme AVC (vido AVC) et/ou

(ii) du dcodage de vidos AVC encodes par un consommateur dans le cadre dun usage personnel et/ou fournies par un fournisseur de vido autoris fournir des vidos AVC. Aucune licence nest concde titre exprs ou implicite pour tout autre usage que ce soit. Des informations complmentaires peuvent tre obtenues auprs de MPEG LA, LLC. Voir http://www.mpegla.com. Ce produit contient un logiciel fourni sous licence conformment la Licence publique gnrale GNU version 2.0 (General Public License, GPL version 2.0), la Licence publique gnrale limite GNU (Lesser General Public License, LGPL) ou toute autre licence. Le programme est un logiciel gratuit, vous pouvez le copier, le redistribuer et le modifier conformment aux conditions de la licence GPL version 2.0, la licence LGPL ou toute autre licence.Au moins trois (3) ans aprs la livraison des produits, Panasonic Mobile Communications Co., Ltd. fournira tous les tiers nous contactant aux coordonnes indiques ci-

dessous, pour des frais nexcdant pas le cot de lexcution physique de la distribution du code source, une copie complte, pouvant tre lue par un ordinateur, du code source correspondant couvert par les licences GPL version 2.0 et LGPL ou toute autre licence. Coordonnes oss-cd-request@gg.jp.panasonic.com Informations relatives aux marques commerciales et aux licences (Franais) 43 Le code source est galement disponible gratuitement pour le public via le site Web indiqu ci-dessous. https://panasonic.net/cns/oss/index.html Veuillez noter que nous ne pouvons pas rpondre aux demandes concernant le code source. Pour plus de dtails concernant le logiciel pertinent (y compris les informations relatives aux licences GPL version 2.0 et LGPL), reportez-

vous aux informations affiches sur lcran suivant : faites glisser lcran daccueil vers le haut puis, dans la liste des applications, appuyez sur

[Paramtres] [ propos de la tablette] [Informations lgales]. Ce produit comprend un logiciel dvelopp par OpenSSL Project dans le but dtre utilis avec lOpenSSL Toolkit

(http://www.openssl.org/source/license.html). Ce produit comprend un logiciel du groupe Independent JPEG Group. Ce logiciel est partiellement bas sur le travail du groupe Independent JPEG Group. Ce logiciel est en partie bas sur le travail du FreeType Project. Ce produit inclut le logiciel suivant : ICU versions 1.8.1 et plus rcentes, copyright (c) 1995-2011 International Business Machines Corporation et autres. Ce produit inclut dautres logiciels libres ou ouverts. Pour plus de dtails concernant les logiciels (y compris les informations relatives aux licences), reportez-vous aux informations affiches sur lcran suivant : faites glisser lcran daccueil vers le haut puis, dans la liste des applications, appuyez sur [Paramtres]

[ propos de la tablette] [Informations lgales]. Technologie TouchSense sous licence dImmersion Corporation. TouchSense et les autres logiciels Immersion inclus dans le produit sont protgs par un ou plusieurs brevets amricains disponibles ladresse suivante :

www.immersion.com/patent-marking.html et dautres brevets en attente. 44 Accessoires (Franais) Pour obtenir les dernires informations concernant les produits en option, reportez-vous aux catalogues des produits, etc. Nom du produit Numro de modle Adaptateur secteur CF-AA6413A FZ-AAE184EM FZ-VZSUN110U Batterie Station daccueil FZ-VEBN111 Coque de charge FZ-VCBN11U Stylet actif Film de protection

(10 feuilles) Station daccueil multi appareils

(5 baies) Baie de chargement pour 5 batteries Station daccueil de charge uniquement

(5 baies) FZ-VNPN11U Srie FZ-VPF FZ-VEBN141 FZ-VCBN131 FZ-VCBN141 Accessoires (Franais) 45 46 Accessoires (Franais) 47 Two Riverfront Plaza, Newark, NJ 07102, USA Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Panasonic Mobile Communications Co., Ltd. 2020

*DHQX1707ZA/J1*

DHQX1707ZA/J1 C0820-0 Printed in Japan

Battery Area Battery rear side of the device. is placed in shows drawing Label Area:

This outline the label in position within the battery The label is visible to the user at the point of sale prior to fitting and cover. batteypack compartment. The label is located inside and it is permanently attached removed from the device. the battery lid (under the battery), by glue, so it is not easily

Ben Botros, Manager Regulatory & Compliance Panasonic Corporation of North America Agent Authorization Letter May 27, 2020 TSBU-20-F005 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Original Application for Model FZ-N1KB with FCC ID: ACJFZN1E To whom it may concern:

Please be notified that Ben Botros of Panasonic Corporation of North America (PNA), hereby authorize Jones Tsai of Sporton International Inc to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Sporton International Inc. on our behalf shall have the same effect as acts of our own. The undersigned hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Sporton as our agent, we still recognize that we are responsible to:

a) b) documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

c) d) and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

e) reference thereto and return any certification documents as required by the Certification Division;

f) g) h) ensure that any reference to our product certification in communication media such as documents, brochures or use certification only to indicate the products are certified as being in conformity with specified standards;

upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute make all necessary arrangements for the conduct of the evaluation, including provision for examining endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

comply with the relevant provisions of the certification program;

advertising, complies with the requirements of the Certification Division;

i) keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;

j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com Ben Botros, Manager Regulatory & Compliance Panasonic Corporation of North America k) document the actions taken. This authorization is for Single filing for FZ-N1KB under FCC ID: ACJFZN1E and is valid for a six month period from the date of this letter. Thank you for your attention in this matter. Sincerely, Ben Botros Manager - Regulatory & Compliance Panasonic Corporation of North America Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com Ben Botros, Manager Regulatory & Compliance Panasonic Corporation of North America Declaration Letter MIF for HAC RF Interference Evaluation May 27, 2020 TSBU-20-F005 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Original Application for Model FZ-N1KB with FCC ID: ACJFZN1E To whom it may concern:

This device, with FCC ID: ACJFZN1E, Hearing Aid Compatibility Requirement will be certified under ANSI C63.19 2011 version per Part 20.19. For Radio Frequency Interference, Speags Audio Interference Analyzer (AIA) or other indirect or direct measurement was not used to determine the M rating. The M rating was determined by measuring the maximum steady state average E-field values in dB (V/m) or average antenna input power as documented in HAC test report exhibit and adding the MIF value in dB. The MIF values below for the worst-case operation mode for all air interfaces are pre-determined values provided by Speag. UID 10460 10225 10170 10061 10077 10427 10069 10616 10671 Communication System Name UMTS-FDD(WCDMA, AMR) UMTS-FDD (HSPA+) LTE-FDD(SC-FDMA,1RB,20MHz,16-QAM) IEEE 802.11b WiFi 2.4 GHz (DSSS, 11 Mbps) IEEE 802.11g WiFi 2.4 GHz (DSSS/OFDM, IEEE 802.11n (HT Greeneld, 150 Mbps, 64-

IEEE 802.11a/h WiFi 5 GHz (OFDM, 54 IEEE 802.11ac WiFi (40MHz, MCS0, 90pc IEEE 802.11ax (20MHz, MCS0, 90pc duty 54 Mbps) QAM) Mbps) duty cycle) cycle) MIF(dB)

-25.43

-20.39

-9.76

-2.02 0.12

-13.44

-3.15

-5.57

-5.58 We are confirming that the Speag simulation provided represents all the air interface modes applicable for a HAC rating for this handset. Sincerely, Ben Botros Manager Regulatory & Compliance Panasonic Corporation of North America Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com Ben Botros, Manager Regulatory & Compliance Panasonic Corporation of North America Request for Permanent & Short-Term Confidentiality May 27, 2020 TSBU-20-F005 Subject: Original Application for Model FZ-N1KB with FCC ID: ACJFZN1E Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject:

To whom it may concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as permanent confidential document from public disclosure. Schematic Diagram Block Diagram Part List Operational Description Tune-up Procedure External Photos Internal Photos Test Setup Photos User Manual Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In addition, please be advised that Panasonic Corporation of North America hereby requests the following filed sensitive information to be held under short-term confidential, pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions Rules and the provisions in FCC Public DA 04-1705. We request temporarily confidentiality of 180 days, starting from the original issued Certification grant date. We will immediately notify Sporton in the event the information regarding the product or the product is made available to the public. Sporton will them release the documents listed above for public disclosure, pursuant to FCC Public Notice DA 04-1705. Sincerely, Ben Botros Manager Regulatory & Compliance Panasonic Corporation of North America Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com