all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
OI Manual SC-HTB370 RQT9777-P 121011 | Users Manual | 1.47 MiB | ||||
1 |
|
OI Manual SC-HTB770 RQT9778-P 121012 | Users Manual | 1.79 MiB | ||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | OI Manual SC-HTB370 RQT9777-P 121011 | Users Manual | 1.47 MiB |
Owners Manual Home Theater Audio System Model No. SC-HTB370 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. If you have any questions, contact:
U.S.A. and Puerto Rico: 1-800-211-PANA (7262) Canada: 1-800-561-5505
RQT9777-P
IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1 2 3 4 5 6 7 8 9 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 2 RQT9777 WARNING Unit To reduce the risk of fire, electric shock or product damage, Do not expose this unit to rain, moisture, dripping or splashing. Do not place objects filled with liquids, such as vases, on this unit. Use only the recommended accessories. Do not remove covers. Do not repair this unit by yourself. Refer servicing to qualified service personnel. Power cord Install this unit so that the power cord can be unplugged from the socket outlet immediately if any problem occurs. Button-type battery (Lithium battery) Risk of fire, explosion and burns. Do not disassemble, heat above 60 oC (140 oF) or incinerate. DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water. If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor.
<For USA-California only>
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. special handling CAUTION Unit Do not place sources of naked flames, such as lighted candles, on this unit. Placement To reduce the risk of fire, electric shock or product damage, Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. Do not obstruct this units ventilation openings with newspapers, tablecloths, curtains, and similar items. Button-type battery (Lithium battery) Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. Keep out of reach of children. Insert with poles aligned. Mishandling of batteries can cause electrolyte leakage and may cause a fire. Remove the battery if you do not intend to use the remote control for a long period of time. Store in a cool, dark place. Do not heat or expose to flame. Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. Do not touch the terminals (
objects. Do not recharge, disassemble, remodel, heat or throw into fire.
) with metal and When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.
THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the follow ing measures:
Reorient or relocate the receiving antenna. Increase the separation betw een the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/T V technician for help. Any unauthorized changes or modifications to this equipment would void the users authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following tw o conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party:
Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support Contact:
Panasonic Consumer Marketing Company of North America Telephone N o.: 1-800-211-PANA (7262) THE FOLLOWING APPLIES ONLY IN CANADA. This device complies with RSS-GEN, RSS-210 of the IC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received, including interference that m ay cause undesired operation of the device. THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with F CC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (R F) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (R F) Exposure rules. This equipment has very low levels of RF energy that is deem ed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm (7 7/ 8 ) or more away from persons body (excluding extremities: hands, wrists, feet and ankles). RQT9777 3 Table of contents IMPORTANT SAFETY INSTRUCTIONS........................................................................... 2 Table of contents.............................................................................................................. 4 Before use Supplied items.................................................................................................................. 5 This unit (SC-HTB370) ............................................................................................................... 5 Accessories ................................................................................................................................ 5 Control reference guide................................................................................................... 6 This unit (Front) .......................................................................................................................... 6 This unit (Rear)........................................................................................................................... 7 Remote control ........................................................................................................................... 8 Getting started Step 1 Selecting the placement method ....................................................................... 9 The speaker system ................................................................................................................. 10 The active subwoofer ............................................................................................................... 10 Wireless interference ................................................................................................................ 10 Step 2 Assembling the speakers ................................................................................. 11 When attaching the speakers to a wall..................................................................................... 11 When placing the speakers on a table ..................................................................................... 16 Additional speaker fall prevention measures............................................................................ 20 Step 3 Connections....................................................................................................... 22 Connection with the TV ............................................................................................................ 22 Connection with other devices.................................................................................................. 22 Speaker cable connection ........................................................................................................ 23 AC power supply cord connection ............................................................................................ 23 Active subwoofer wireless connection...................................................................................... 24 Bluetooth connection .............................................................................................................. 24 Operations Using this unit ................................................................................................................ 25 3D sound ......................................................................................................................... 26 Audio output modes.................................................................................................................. 26 Advanced operations..................................................................................................... 27 Reference Troubleshooting............................................................................................................. 29 Specifications................................................................................................................. 30 Unit care.......................................................................................................................... 32 About Bluetooth ........................................................................................................... 32 Indicator illumination..................................................................................................... 33 Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO) ................................................................. 34 Limited Warranty (ONLY FOR CANADA) ..................................................................... 35 4 RQT9777 The illustrations shown may differ from your unit. Operations in this Owners Manual are described mainly with the remote control, but you can perform the operations on the main unit if the controls are the same. Supplied items This unit (SC-HTB370) 1 Main unit
(SU-HTB370) 1 Active subwoofer
(SB-HWA370) 2 Front speakers
(SB-HTB370) Accessories Check the supplied accessories before using this unit. 1 Remote control
(with a battery)
(N2QAYC000083) 2 AC power supply cords
(K2CB2YY00084) 2 Speaker cables
(REEX1266A: RED)
(REEX1267A: WHITE) Length: 3 m (9.8 ft) 1 Metal bracket
(RML0760A) 6 Screws
(XYN5+J14FJK) 2 Speaker feet
(RKAX0042-K) 2 Stand necks
(RGK2444) 2 Leg stands
(RGK2463) 2 Support legs
(RGK2464) 2 Speaker bases
(RGK2465)
(ONLY FOR CANADA) The enclosed French Canadian label sheet corresponds to the English display on the remote control and the top and rear of the main unit and active subwoofer. Product numbers are correct as of D ecember 2012. These may be subject to change. For U.S.A. and Puerto Rico:
To order accessories, refer to Accessory Purchases (United States and Puerto Rico) on page 34. For Canada: To order accessories, call the dealer from whom you have made your purchase. The supplied AC pow er supply cord is for use with this unit only. Do not use it with other equipment. Also, do not use cords from other equipment with this unit. RQT9777 5 Control reference guide This unit (Front) 4 5 6 7 1 2 3 1
/I) Standby/on switch (
Press to switch the main unit from on to standby mode or vice versa. In standby mode, the main unit is still consuming a small amount of power. 5 2 Adjust the volume of this unit 3 Select the input source
TV
BD/DVD
AUX
4 Input selector indicators Bluetooth indicator Lights blue when the Bluetooth device is the audio source TV indicator Lights green when the TV is the audio source BD/DVD indicator Lights amber when the device connected to the BD/DVD terminal is the audio source AUX indicator Lights amber when the device connected to the AUX terminal is the audio source Main unit Sound mode indicators Active subwoofer STANDARD indicator Lights when STANDARD is the current sound mode STADIUM/Dolby Digital indicator Lights when STADIUM is the current sound mode MUSIC/DTS indicator Lights when MUSIC is the current sound mode CINEMA/PCM indicator Lights when CINEMA is the current sound mode NEWS indicator Lights when NEWS is the current sound mode STEREO indicator Lights when STEREO is the current sound mode 6 Remote control signal sensor (
7 WIRELESS LINK indicator (
24) 8) The indicators will also blink in various conditions (
33) To indicate the current audio format, refer to page 27 (Audio format indicator) 6 RQT9777 This unit (Rear) 1 A C IN 23) 1 AC IN terminal (
2 Speaker terminals (
3 22) 4 BD/DVD terminal (
TV terminal (
23) 22) 2 3 4 5 6 7 6 R 6
SPEA KERS D IGITA L A U DIOIN TV(O PT 1) B D/D V D
(O PT2 ) FO R SER VICE ON LY A U X R L 1 5 USB port (for service use only) 6 AUX terminal (
7 Active subwoofer on/off button 22) The I/D SET button is only used when the main unit is not paired with the active subwoofer (
30) RQT9777 7 Remote control
Before using for the first time Remove the insulation sheet
. To replace a button-type battery Battery type: CR2025 (Lithium battery) 1 Turn the main unit on or off (
2 Adjust the dialog effect level (
3 Adjust the output level of the active subwoofer 25) 25) 25)
(bass sound) (
Adjust the volume of this unit (
4 5 Mute the sound (
25) 6 Select the input source (
AUX
BD/DVD
TV 25) 25)
7 Select the Bluetooth device as the source
25) 8 Select the sound mode (
STANDARD
STEREO 25)
STADIUM
NEWS
MUSIC
CINEMA Set the button-type battery with its (
facing upward.
) mark Remote control operation range The remote control signal sensor is located on the main unit. Use the remote control within the correct operation range. Remote control signal sensor Operation range Distance: Within approx. 7 m
(23 ft) directly in front Angle: Approx. 30o left and right 8 RQT9777 Step 1 Selecting the placement method Choose a placement method that suits you best. When attaching the speakers to a wall Place the speakers horizontally Place the speakers vertically When placing the speakers on a table Place the speakers using the leg stands Place the speakers using the support legs and speaker feet Place the speakers using the speaker bases Page 11 Page 14 Page 16 Page 17 Page 18 RQT9777 9 Caution This unit is to be used only as indicated in these instructions. F ailure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. C onsult a qualified service person if damage has occurred or if you experience a sudden change in performance. Do not attem pt to attach these speakers to a wall using m ethods other than those described in this m anual. The speaker system Use a screwdriver (
Do not hold the speakers in one hand to avoid injury, you may drop the speakers when carrying them.
) for assembling the speakers. When attaching the speakers to a wall The wall or pillar on which the speakers are to be attached should be capable of supporting 33 kg (72.8 lbs) per screw. Consultation with a qualified installation specialist is recommended when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers, and personal injury. When placing the speakers in front of the TV The speakers may block or interfere w ith the TVs various sensors (C.A.T.S. (Contrast Automatic Tracking System) sensor, remote control sensor, etc.) and the 3D Eyew ear transmitters on a 3D compatible TV. If the stands are being used If the stands are not used Change the height of the stands and/or move the speakers further away from the TV. If the TV still does not function correctly, try removing the stands. Move the speakers further away from the TV. If the TV still does not function properly, try placing them beside the TV (
9). The active subwoofer When carrying the active subwoofer
Do not hold the active subwoofer from this opening. The parts inside may get damaged. Always hold the bottom of the active subwoofer when moving it. Wireless interference To avoid interference, maintain the following distances between the main unit/active subwoofer and other electronic devices that use the same radio frequency (2.4 GHz band).
Main unit/active subwoofer Wireless LAN: approx. 2 m (6 1/2 ft) Cordless phone and other electronic devices:
approx. 2 m (6 1/2 ft) Place the active subwoofer within a few meters of the main unit and in a horizontal position with the top panel faced upward. Do not use this unit in a metal cabinet. Placing the active subwoofer too close to the walls and corners can result in excessive bass. C over w alls and windows with thick curtains. If irregular coloring occurs on your TV, turn the T V off for about 30 minutes. If it persists, move the speakers further away fr om the TV. Keep magnetized items away. Magnetized cards, watches, etc., can be damaged if placed too close to the active subwoofer and the speakers. 10 RQT9777 Step 2 Assembling the speakers When attaching the speakers to a wall Place the speakers horizontally 2 Speakers 4 Screws 2 Speaker cables WHITE: Left RED: Right 1 Metal bracket For a safety measure to prevent the speakers from falling, refer to page 20. To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers. The two speakers are interchangeable. Screw (supplied) Be sure to insert the screws follow ing the order as indicated in the illustration. Keep the screws out of reach of children to prevent swallowing. RQT9777 11 Connect the speaker cables. Push Insert the wire fully.
: White
: Blue line Press into the groove. Right speaker connector Left speaker connector Red White Insert the wire fully, taking care not to insert beyond the wire insulation. Drive a screw into the wall. Use the measurements indicated below to identify the screwing positions on the wall. Leave at least 20 mm ( 25/ 32 ) of space above and on each side of the speaker to allow enough space for fitting the speaker. The position on the wall where the screw is to be attached, as w ell as the screw, should be capable of supporting over 33 k g
(72.8 lbs). Keep the screws out of reach of children to prevent swallowing. At least 30 mm (1 3/16 ) 4.0 mm (5/32 ) 7.0 mm to Wall or pillar 5.5 mm to 6.5 mm (7/32 to 1/4 ) 9.4 mm (9/32 to 3/8 ) Front view (semi-transparent image) 248 mm (9 3/4 ) Wall mounting hole 745 mm (29 11/32 ) 238 mm (9 3/8 ) 20 mm (25/32 ) 12 RQT9777 Fit the speaker securely onto the screw(s). Red connector: The speaker attached to the red connector cable is to be place on the right side White connector: The speaker attached to the white connector cable is to be place on the left side White Red Right speaker connector Left speaker connector DO Move the speaker so that the screw is in this position. DO NOT In this position, the speaker will likely fall if moved to the left or right. RQT9777 13 Place the speakers vertically 2 Speakers 2 Screws 2 Speaker cables WHITE: Left RED: Right 2 Stand necks For a safety measure to prevent the speakers from falling, refer to page 20. To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Attach the stand neck. The two speakers are interchangeable. Keep the screws out of reach of children to prevent swallowing. Screw (supplied) Connect the speaker cables. Insert the wire fully, taking care not to insert beyond the wire insulation. Push 14 RQT9777 Insert the wire fully.
: White
: Blue line Press into the groove. Drive a screw into the wall. Use the measurements indicated below to identify the screwing positions on the w all. Leave at least 20 mm (25/32 ) of space above and on each side of the speaker to allow enough space for fitting the speaker. The position in the wall w here the screw is to be attached as well as the screw should be capable of supporting over 33 kg (72.8 lbs). Keep the screws out of reach of children to prevent swallowing. Front speaker
(Rear view) 100 mm (3 15/16 ) 436 mm (17 5/32 ) 34 mm (1 11/32 ) Wall mounting hole At least 30 mm (1 3/16 ) 4.0 mm (5/32 ) 7.0 mm to Wall or pillar 5.5 mm to 6.5 mm (7/32 to 1/4 ) 9.4 mm (9/32 to 3/8 ) Fit the speaker(s) securely onto the screw(s). Red connector: The speaker attached to the red connector cable is to be place on the right side. White connector: The speaker attached to the white connector cable is to be place on the left side. Left speaker connector Right speaker connector White Red DO Move the speaker so that the screw is in this position. DO NOT In this position, the speaker will likely fall if moved to the left or right. RQT9777 15 When placing the speakers on a table Place the speakers using the leg stands 2 Speakers 2 Leg stands 2 Speaker cables WHITE: Left RED: Right 4 Screws 1 Metal bracket For a safety measure to prevent the speakers from falling, refer to page 20. To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers following steps 1 and 2 of Place the speakers horizontally (
Attach the leg stands. 11). Red connector: With the speaker facing down, the speaker attached to the red connector cable is to be place on the left side. White connector: With the speaker facing down, the speaker attached to the white connector cable is to be place on the right side. Keep the screws out of reach of children to prevent swallowing. White Red Align the higher or lower holes with the projecting parts on the speaker. By changing the position that the stand is attached to the projecting parts, the height can be adjusted by 10 mm (13/32 ). Screw (supplied) Screw hole Right speaker connector Left speaker connector 16 RQT9777 Place the speakers using the support legs and speaker feet 2 Speakers 2 Support legs 2 Speaker cables WHITE: Left RED: Right 4 Screws 1 Metal bracket 2 Speaker feet For a safety measure to prevent the speakers from falling, refer to page 20. To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers following steps 1 and 2 of Place the speakers horizontally (
Attach the support legs and speaker feet. 11). Red connector: With the speaker facing down, the speaker attached to the red connector cable is to be place on the left side. White connector: With the speaker facing down, the speaker attached to the white connector cable is to be place on the right side. Keep the screws and the speaker feet out of reach of children to prevent sw allowing. Align the projecting parts on the speaker with support leg. Screw (supplied) Screw hole Speaker foot (supplied) White Red Right speaker connector Left speaker connector RQT9777 17 Place the speakers using the speaker bases 2 Speakers 2 Speaker bases 2 Speaker cables WHITE: Left RED: Right 4 Screws 2 Stand necks For a safety measure to prevent the speakers from falling, refer to page 20. To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers following step 1 of Place the speakers vertically (
Insert the speaker cable through the speaker base and connect the speaker cables. 14). Be sure to insert the speaker cable through the threading hole as indicated in the illustration. (If the speaker cable is twisted, it might not fit through the opening. Straighten the speaker cable before inserting.) Insert the wire fully, taking care not to insert beyond the wire insulation. Insert the wire fully.
: White
: Blue line Press into the groove. Push 18 RQT9777 Attach the speaker base to the front speaker. The two speakers are interchangeable. Keep the screws out of reach of children to prevent swallowing. Screw (supplied) Tighten securely. Align the projecting parts with the holes on the speaker. Press into the groove. Red connector: The speaker attached to the red connector cable is to be place on the right side. White connector: The speaker attached to the white connector cable is to be place on the left side. RQT9777 19 Additional speaker fall prevention measures To prevent the speakers from falling, it is recommended, as an additional protection measure, to attach the speakers to the wall or table with a fall prevention cord (hereafter cord). Consultation with a qualified installation specialist concerning the appropriate procedure when attaching to a concrete wall or a 12, 15). Improper attachment m ay result in damage to surface that may not have strong enough support is recommended (
the wall and speakers, and personal injury. Use a cord that is capable of supporting over 10 kg (22.05 lbs) (with a diameter of about 1.5 mm (1/16 )). The safety holder is to minimize the possibility of dam age and harm, but it does not guarantee this effect. Keep the screws out of reach of children to prevent swallowing. Make sure that the slack of the cord is minimal. When attaching the speakers to a wall Horizontal placement Vertical placement Cord Screw eye Wall Wall-mounted speakers If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 10 mm (13/32 ) apart from the tip, at an angle of 45o (as illustrated above). 20 RQT9777 When placing the speakers on a table Horizontal placement Vertical placement Cord Screw eye Depending on the placement of the speakers, the screwing position of the screw eye may differ. Wall Approx. 150 mm (5 29/32 ) If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 10 mm (13/32 ) apart from the tip, at an angle of 45o (as illustrated above). RQT9777 21 Step 3 Connections Turn off all equipment before connection and read the appropriate owners manual. Do not connect the AC power supply cord until all other connections are complete. Connection with the TV DI GITAL AU DIO IN TV
(OPT1) OPTICAL OUT TV Optical digital audio cable A C IN SPEAKERS/HAU T-PARLEURS TV(OPT1) A UX DI GITA L AUD IOIN When you use the optical digital audio cable, insert the tip correctly into the terminal. Connection with other devices You can direct the audio signal from the connected Blu-ray DiscTM player, DVD player, Set Top Box, etc. to this system. High quality audio Refer to the operating instructions of the respective devices for the optimal connection TV e.g., Blu-ray DiscTM player
Optical digital audio cable
Standard quality audio Refer to the operating instructions of the respective devices for the optimal connection
TV e.g., Set top box Audio cable
A U X R SPEAKERS/HAU T-PARLEURS L
DI GITA L AUD IO
IN
A UX L R A C IN 22 RQT9777 Speaker cable connection Match the connector shape and connect to the terminals of the same color.
RED Right speaker connector WHITE Left speaker connector AC power supply cord connection Connect only after all other connections are complete.
AC power supply cord To a household AC outlet 30) even when it is turned off. In the interest of This unit consumes a small amount of AC power (
power conservation, if you will not be using this unit for a long time, unplug it from the household AC outlet. Saving energy The main unit is designed to conserve its power consumption and save energy. The main unit will automatically switch to standby mode when no signal is input and no operation is performed for approx. 30 minutes. RQT9777 23 Active subwoofer wireless connection Preparation Turn on the main unit. I]. Press [
Bluetooth connection By using the Bluetooth connection, you can listen to the sound from the Bluetooth audio device from this unit wirelessly Preparation Turn on the Bluetooth feature of the device and place the device near this unit. Pairing a device Active subwoofer on/off button [
Use this button to turn the active subwoofer on and off. I:
The active subwoofer is on I]
The active subwoofer is off The active subwoofer will still consume a small amount of power even when it is turned off (
, PAIRING]. Press [
indicator will blink quickly. Select SC-HTB370 from the Bluetooth devices Bluetooth menu. Once the Bluetooth device is connected, the stops flashing and lights up.
indicator Refer to the operating instructions of the Bluetooth device for further instruction on how to connect a Bluetooth device. If prompted for the passkey on the Bluetooth device, enter
0000.
) Pairing additional devices Check that the wireless link is activated. Press [
, PAIRING].
, Press and hold the [
until the indicator flashes quickly. Repeat step 2 of Pairing a device. PAIRING]
WIRELESS LINK indicator lights Red:
The wireless link is not activated. Green:
The wireless link is activated. You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used for the longest time will be replaced. This unit can only be connected to one device at a time. To change the sound quality, refer to Bluetooth communication mode on page 27. 24 RQT9777 Using this unit Preparation Turn on the active subwoofer. Turn on the TV and/or connected device.
Press [
] to turn on the main unit. Select the source. To select
TV
BD/DVD Press
[INPUT SELECTOR]
This rem ote control cannot be used to control the operations of the connected devices.
(Bluetooth)
AUX
When is selected as the source On the Bluetooth device:
Select this unit as the output source of the Bluetooth device and start the playback. Make sure that the Bluetooth device is already paired with this unit. (
Playback may pause w hen a different source is selected. 24) When BD/DVD is selected as the source On the connected device:
Select the TVs input for this unit and start the playback on the connected device. When AUX is selected as the source On the connected device:
Select the TVs input for the device connected to AUX terminal and start the playback on the connected device. Adjust the volume and sound effect level. To adjust the volume of this unit Press [ VOL
]. Volum e range: 1 to 100 To adjust the dialog effect level This setting will change the level of the Clear-
mode dialog effect. (
1 Press [ DIALOG LEVEL
] to display the 26) current level. 2 While the level is displayed:
Press [ DIALOG LEVEL level.
] to adjust the Indication Effect level 4 3 2 1 Highest Lowest To adjust the subwoofer level 1 Press [ SUBWOOFER ] to display the current level. 2 While the level is displayed:
Press [ SUBWOOFER ] to adjust the level. The level indication pattern is the same as dialog effect level. To mute the sound Press [MUTE]. While muting, the sound mode indicators blink simultaneously. To cancel, press the button again or adjust the volume. Muting is canceled if the main unit is turned off. If the main unit does not operate as expected or sound is unusual, return the settings to the factory preset and operate the system again. (
29) The sound m ode indicators blink from left to right (
The indicators will not blink when it has reached the maximum or minimum. If there is sound coming out of the TVs speakers, reduce the volume of the TV to its minimum. If the main unit is turned off w ith the volume setting in the greater half (above 50), the main unit will automatically lower the volume to the middle (50) when the main unit is turned on (Volume limitation). To turn this function off, refer to page 28.
) or from right to left (
) while adjusting. RQT9777 25 3D sound This unit provides a feeling that the sound and the image are as one. To change the applied effect, refer to Audio output modes. (
e.g., Image of 3D sound field right) Audio output modes By changing the audio output mode, it is possible to enjoy the sound that is suitable to the TV program or image from the connected device. To select the sound mode Press [SOUND].
STANDARD
STEREO
STADIUM
NEWS
CINEMA
MUSIC The indicator for the selected sound mode lights. E.g., STANDARD
STANDARD
(Factory preset)
STADIUM
MUSIC
CINEMA
NEWS
STEREO Sound mode Produces a sound best suited for dramas and comedy shows. Produces a highly realistic sound for live broadcasts of sports. Re-creates the sound of musical instruments and songs with an expansive sound. Produces a powerful, three-
dimentional sound unique to movies. Enhances the voices of news and sports commentaries for clearer hearing. You can play any source in stereo. Dolby Virtual Speaker and 3D surround effects are turned off. The setting is maintained until it is changed again. When using the optical digital audio cable, D olby Virtual Speaker and the 3D surround effect will be temporarily canceled if the audio signals sampling frequency is greater than 48 kHz. Dolby Virtual Speaker 3D surround effect Clear-mode dialog 3D sound With this effect you can enjoy a surround sound effect similar to 5.1ch. Adding to the Dolby Virtual Speaker effect, Panasonic has applied its own sound field controlling technology to expand the sound field forwards, backwards, upwards, and downwards, providing a sound with depth and force that better matches 3D images. Sports commentary and dialogs from TV dramas are heard as if the sound is coming from the TV, giving the feeling that the sound and the image are one. Also, the dialog will stand out from the other sounds during normal volume playback and when the volume is lowered for night time viewing. right) To turn off Dolby Virtual Speaker and the 3D surround effects, select STEREO as the audio output mode.
To turn off the 3D surround and the Clear-mode dialog effects, refer to Only using the Dolby Virtual Speaker effect. (
28) 26 RQT9777 Advanced operations Audio format indicator To display the current audio format, Press and hold [SOUND] for more than 4 sec. The current audio format is indicated for 5 sec. Auto gain control With this function, you can prevent sudden loud sounds. The output will be reduced automatically when the input exceeds a certain level. Press and hold [INPUT SELECTOR]
on remote controller for more than 4 sec.
STADIUM indicator blinks:
Dolby Digital is the audio format.
STANDARD indicator blinks:
Auto gain control is on.
MUSIC indicator blinks:
DTS is the audio format.
CINEMA indicator blinks:
PCM or LPCM is the audio format. The audio format status is also indicated for 5 sec if the audio format on the selected source (TV, Blu-ray Disc/
DVD Player, etc.) is changed. Changing the dual audio Change the dual audio from main to secondary. This setting will only work if the audio output setting on the connected TV or player, etc. is set to "Bitstream"
and dual audio is available in the audio source. Press and hold [MUTE] for more than 4 sec. While the setting is displayed, press
[MUTE] to change the setting. The indicator for the selected setting blinks for 20 sec and then exits the setting mode.
STANDARD indicator blinks (
Main (Factory preset)
STEREO indicator blinks (
Secondary
(SAP: Secondary Audio Program)
: Main and secondary
, The setting is maintained until it is changed again. The same setting is used for all digital audio sources.
STEREO indicator blinks:
Auto gain control is off.
(Factory preset) While the setting is displayed, press
[INPUT SELECTOR] to change the setting. The indicator for the selected setting blinks for 20 sec and then exits the setting mode. The setting changes each time [IN PUT SELECTOR] is pressed. The setting is maintained until it is changed again. Default setting of this function is OFF. Bluetooth communication mode You can select different modes to suit the type of connections which emphasis on connectivity or high quality audio. Make sure that a Bluetooth device is already paired with this unit. (
24)
Disable the Bluetooth connection of the device.
indicator will blink slowly. Press [LINK MODE, current mode.
] to display the
STANDARD indicator blinks:
MODE1 (Factory preset) Emphasis on connectivity
STEREO indicator blinks:
MODE2 Emphasis on audio quality While the mode is displayed, press
] to select the mode.
[LINK MODE, The setting changes each time [LINK MODE, pressed. The indicator for the selected setting blinks for 10 sec and then exits the setting mode. The setting is maintained until it is changed again.
] is RQT9777 27 Only using the Dolby Virtual Speaker effect Depending on your preference, It is possible to turn off the 3D surround effect and the clear-mode dialog effect. While pressing and holding [SOUND]
on the remote control, press and hold [VOL ] on the main unit for more than 4 sec.
STANDARD indicator blinks:
3D surround effect and clear-mode dialog effect is on.
STEREO indicator blinks:
3D surround effect and clear-mode dialog effect is off. While the setting is displayed, press
[SOUND] to change the setting. The setting changes each time [SOUND] is pressed. The indicator for the selected setting blinks for 20 sec and then exits the setting mode. This setting will be reset to on when this unit is turned off. When off is selected, the dialog effect level cannot be adjusted. Dimmer mode You can turn off dimmer mode and keep the LED indicators bright. While pressing and holding [INPUT SELECTOR] on the remote control, press and hold [ VOL] on the main unit to turn off Dimmer mode. The indicator for the current condition will turn brighter. The setting is maintained until it is changed again. Default setting of this function is on. Others Remote control code When other Panasonic devices respond to this units remote control, change the remote control code on the main unit and the remote control. Preparation Turn off all other Panasonic products. Turn on the main unit. Change the remote control code to code 2:
1 Aim the remote control at this units remote control sensor. Press and hold [MUTE] and [
control for more than 4 sec. 2
] on the remote All the indicators will blink for 10 sec when the code of this unit is changed. The setting is maintained until it is changed again. If this unit does not operate after changing the code, repeat steps 1 and 2. To change the remote control code to code 1, repeat the steps above, but replace [
] with [INPU T SELECTOR]. To reduce the clear-mode dialog effect When the dialog does not sound natural while the volume is set low, it is possible to reduce the dialog enhancing effect as follows:
While pressing and holding [SOUND] on the remote control, press and hold [ VOL] on the main unit for more than 2 sec. All the indicators will blink once when the clear-mode dialog effect is reduced. Even if clear-mode dialog effect is reduced, dialog effect level is still adjustable. To turn on dimmer mode, repeat the operation above. After performancing the operation, the indicator for the current condition will be dim. To reset the setting, return to the factory preset. (
29) To turn off the volume limitation If a state of the lowered volume disturbs you every time this unit turns on, for example, it is possible to turn off this function as follows:
While pressing and holding [MUTE] on the remote control, press and hold [VOL for more than 2 sec.
] on the main unit All the indicators will blink once when the volume limitation is turned off. To reset the setting, return to the factory preset. (
right) 28 RQT9777 Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, refer to Customer Services Directory (United States and Puerto Rico) on page 34 if you reside in the U.S.A. or Puerto Rico, or refer to WARRANTY SERVICE on page 35 if you reside in Canada.
/I] on the main To return to the factory preset. While the main unit is on, press [
unit for more than 4 sec.
(All the indicators will blink twice when the main unit is reset.) If this unit does not operate as expected, returning the settings to the factory preset may solve the problem. The remote control code will return to when the main unit is returned to the factory preset. To change the remote control code, refer to page 28. General operation No power. Insert the AC power supply cord securely. (
After turning the main unit on, if the indicators blink and the main unit immediately turns off, unplug the AC power supply cord and consult your dealer. 23) 8) The remote control does not work properly. The battery is depleted. Replace it with a new one.
It is possible that the insulation sheet has not been removed. Remove the insulation sheet. (
It may be necessary to set the code of the remote control again after changing the battery of the remote control. (
Use the remote control within the correct operation range. (
28) 8) 8) Bluetooth Pairing cannot be done. Check the Bluetooth device condition. The device cannot be connected. The pairing of the device was unsuccessful. Try pairing the device again. The pairing of the device has been replaced. Pair the device again. (
This unit might be connected to a different device. Disconnect the other device and try pairing the device again. 24) The device is connected but audio cannot be heard through this unit. For some built-in Bluetooth devices, you have to set the audio output to SC-HTB370 manually. Read the operating instructions for the device for details. Sound from the device is uneven. The device is out of the 10 m (33 ft) communication range. Bring the device closer to the main unit. Remove any obstacle between the main unit and the device. Switch off any wireless LAN device. Select MODE1 for stable communication. (
27) Sound No sound (or image). 25) 30) 22) Turn muting off. (
Check the connections to the other devices. (
Make sure that the received audio signal is compatible with this unit. (
Turn this unit off and then on again. If the connections are correct, there might be a problem with the cables. Redo the connections with different cables. Check the audio output settings on the connected device. The TV indicator blinks. Remove the AC power supply cord and consult your dealer. If there are any other indicators blinking, be sure to inform your dealer about the blinking indicators. The main unit is automatically switched to standby mode. The main unit will automatically switch to standby mode when no signal is input and no operation is performed for approx. 30 minutes. (
23) The dual audio cannot be changed from main to secondary. If the audio received from the connected device is not
Dolby Dual Mono or the output setting is not Bitstream, the setting cannot be changed from this unit. Change the setting on the connected device. The volume is lowered when this unit is turned on. If the main unit is turned off with the volume setting in the greater half (above 50), the main unit will automatically lower the volume to the middle (50) when the main unit is turned on. (
28) The dialog is too persistent or the dialog does not sound natural. This unit has a function to make the dialog stand out when the volume is low. (
28) RQT9777 29 Specifications AMPLIFIER SECTION RMS output power 10 % total harmonic distortion Subwoofer ch 120 W per channel (100 Hz, 8 ) Front ch (L, R ch) 60 W per channel (1 kHz, 6 ) Total RMS Dolby Digital mode power FTC output power 1.0 % total harmonic distortion Subwoofer ch 60 Hz to 120 Hz 40 W (8 Front ch (L, R ch) Total FTC Dolby Digital mode power 120 Hz to 20 kHz 25 W (6 300 W
) 115 W WIRELESS SECTION Wireless module Frequency Range Number of channels 2.4 GHz band 3 TERMINAL SECTION Digital audio input Sampling frequency Optical digital input (TV, BD/DVD) 2 Audio format 32 kHz, 44.1 kHz, 48 kHz 88.2 kHz, 96 kHz (only LPCM) LPCM, Dolby Digital, DTS SPEAKER SECTION Front speakers 2 way, 2 speaker system (Bass reflex type) Speaker unit(s) Impedance 6 Woofer Tweeter 6.5 cm (2 1/2 ) cone type 1 2.5 cm (1 ) semi-dome type 1 Frequency range 100 Hz to 30 kHz ( 16 dB) 150 Hz to 25 kHz ( 10 dB) Active subwoofer 1 way, 1 speaker system (Bass reflex type) Woofer Frequency range 16 cm (6 1/2 ) cone type 1 30 Hz to 180 Hz ( 16 dB) 35 Hz to 160 Hz ( 10 dB) There is no audio. The power of the main unit turns off automatically.
(When the main unit detects a problem, a safety measure is activated and the main unit automatically switches to standby mode.) There is a problem with the amplifier. Is the volume extremely high?
If so, lower the volume. Is this unit placed in an extremely hot place?
If so, move this unit to a cooler place and wait a few moments and then try to turn it on again. If the problem persists, confirm the TV indicator and BD/DVD indicator blink, turn this unit off, remove the AC power supply cord and consult your dealer. Please be sure to remember the indicators that were blinking and inform the dealer. Active Subwoofer No power. Ensure the AC power supply cord of the active subwoofer is connected properly. After turning the subwoofer on, it immediately turns off. Unplug the AC power supply cord and consult your dealer. No sound from the subwoofer. Check that the active subwoofer is turned on. Check that the wireless link indicator lights green.
24) The wireless link indicator lights red. There is no link between this unit and the active subwoofer. Check that this unit is turned on. Turn the active subwoofer off and then back on. Alternatively, turn the active subwoofer off, disconnect the AC power supply cord and then reconnect it. The active subwoofer and the main unit may not be paired correctly. Try the following operation. (Wireless pairing) Turn on the main unit and active subwoofer. Press [ID SET] on the rear of the active subwoofer.
(The WIRELESS LINK indicator will light red and green alternately.) While pressing and holding [INPUT SELECTOR] on remote control, press and hold [VOL
] on the main unit for more than 4 sec. (The BD/DVD indicator will blink and sound mode indicators light up in sequence.) When the wireless pairing is successful, BD/DVD indicator w ill stop flashing and WIRELESS LINK indicator lights green. Turn the main unit off and on. Consult your dealer if the problem persists. 30 RQT9777 GENERAL SPEAKER GENERAL Power consumption Main unit: 22 W Active subwoofer: 20 W In standby condition Main unit (When the other connected devicesare turned off) Approx. 0.25 W Approx. 0.2 W AC 120 V, 60 Hz Active subwoofer:
Power supply Dimensions (W H D) Main unit Cabinet dimension Maximum outer dimension Active subwoofer 310 mm 44 mm 195 mm 7 11/16 )
(12 7/32 1 23/32 310 mm 45 mm 202 mm 7 15/16 )
(12 7/32 1 25/32 180 mm 408 mm 306 mm 12 1/16 ) 16 1/16
(7 3/32 Horizontal placement using the stands Dimensions (W H D) 956 mm 102 mm 74 mm 2 29/32 ) 1.61 kg (3.7 lbs)
(37 5/8 4 1/32 Mass (Weight) Horizontal placement using the speaker feet and the support legs Dimensions (W H D) 956 mm 78 mm 55 mm 2 5/32 ) 1.57 kg (3.5 lbs)
(37 5/8 3 1/16 Mass (Weight) Horizontal placement (for wall mount) Dimensions (W H D) 956 mm 75 mm 35 mm 1 3/8 ) 1.54 kg (3.5 lbs)
(37 5/8 2 15/16 Mass (Weight) Vertical placement using the speaker bases Dimensions (W H D) Mass (Weight) Main unit Active subwoofer Operating temperature range Mass (Weight) 1.1 kg (2.4 lbs) 5.2 kg (11.47 lbs) Vertical placement (for wall mount) Dimensions (W H D) Operating humidity range 0 oC to 40 oC ( 32 oF to 104 oF) Mass (Weight) 20 % to 80 % RH (no condensation) 148 mm 528 mm 145 mm 20 25/32 5 23/32 ) 0.88 kg (1.98 lbs)
(5 13/16 75 mm 478 mm 35 mm 1 3/8 ) 0.77 kg (1.76 lbs) 18 13/16
(2 15/16 Bluetooth SECTION Bluetooth system specification Wireless equipment classification V3.0 Class 2 (2.5 mW) A2DP, AVRCP Supported profiles Frequency band Operating distance 2.4 GHz band
(Adaptive Frequency Hopping) 10 m (33 ft) Line of Sight 1 Specifications are subject to change without notice. 2 Weight and dimensions are approximate. 3 Total harmonic distortion is measured by a digital spectrum analyzer. RQT9777 31 Unit care Clean this unit with a soft, dry cloth When dirt is heavy, wring a cloth moistened in water tightly to wipe the dirt, and then wipe it with a dry cloth. When cleaning this unit, use a fine cloth. Do not use tissues or other materials (towels, etc.) that can fall apart. Small grains may get stuck inside the speaker cover. Never use alcohol, paint thinner or benzine to clean this unit. Before using chemically-treated cloth, carefully read the instructions that came with the cloth. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of D olby Laboratories. Manufactured under license under U.S. Patent Nos:
5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of D TS, Inc. Product includes software. DTS, Inc. All Rights Reserved. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. About Bluetooth Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. Frequency band used This unit uses the 2.4 GHz frequency band. Certification of this device This unit conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. The action below are punishable by law in some countries:
Taking apart or modifying the unit. Removing specification indications. Restrictions of use Wireless transmission and/or usage with all Bluetooth equipped devices is not guaranteed. All devices must conform to standards set by Bluetooth SIG, Inc. Depending on the specifications and settings of a device, it can fail to connect or some operations can be different. This unit supports Bluetooth security features. But depending on the operating environment and/or settings, this security is possibly not sufficient. Transmit data wirelessly to this unit with caution. This unit cannot transmit data to a Bluetooth device. Range of use Use this device at a maximum range of 10 m (33 ft). The range can decrease depending on the environment, obstacles or interference. Interference from other devices When other devices use the same frequency as this unit, this unit may operate incorrectly or the sound may be distorted. To prevent interference from other devices:
Keep this unit away from other devices that emit radio frequency interference. Do not use this system and a wireless LAN device at the same time. Switch off any wireless LAN device. Intended usage This unit is for normal, general use only. Do not use this unit near an equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc). 32 RQT9777 Indicator illumination The indicators display the condition of this unit by flashing. The indicator patterns illustrated below are displayed during normal operational conditions. They do not refer to the indications of a problem. Refer to Troubleshooting (
Indicator 29) if the indicators do not light up as illustrated below. Description The BD/DVD indicator blinks 2 and sound mode indicators light up in sequence for 1 minute. When the main unit is in wireless pairing mode with the active subwoofer (
30) The indicator blinks for 20 sec. 28) When 3D surround effect and clear-mode dialog effect are on (
When the dual audio setting is Main (
When the auto gain control is on (
When the Bluetooth communication is mode 1 (
27) 27) 27)
The indicators blink for 5 sec. When the audio format is Dolby Digital (
27) The indicator blinks for 5 sec. When the audio format is DTS (
27) The indicators blink for 5 sec. When the audio format is PCM (
27) The indicator blinks for 20 sec. 28) When 3D surround effect and clear-mode dialog effect are off (
When the dual audio setting is Secondary (SAP:
Secondary Audio Program) (
27) When the auto gain control is off (
When the Bluetooth communication is mode 2 (
27) 27) The indicators blink for 20 sec. When the dual audio setting is Main and Secondary
27) The indicators blink for 10 sec. When the remote control code is changed (
28) The indicators blink once. When changing the setting (To reduce the clear-mode dialog effect, and To turn off the volume limitation)
28) Bluetooth indicator blinks quickly. When the main unit is ready for pairing Bluetooth indicator blinks slowly. When the main unit is waiting to connect Bluetooth indicator turns on. When the main unit is connected with a Bluetooth device 1 The selected source indicator will also light. 2 The BD/DVD indicator stops blinking and lights once the wireless pairing is successful. RQT9777 33 Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO) Panasonic Consumer Marketing Company of North America, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Products Limited Warranty Limited Warranty Coverage
(For USA and Puerto Rico Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Marketing Company of North America
(referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or
(c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor. Product or Part Name Home Theater Audio System All included Accessories
(Except Non-Rechargeable Batteries) Parts 1 year 90 days Only Non-Rechargeable Batteries 10 days Labor 1 year Not Applicable Not Applicable During the Labor warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold as is. Mail-In Service For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship the product prepaid to:
Panasonic Exchange Center 4900 George McVay Drive Suite B McAllen, TX 78503 panacare@us.panasonic.com Online Repair Request To submit a new repair request and for quick repair status visit our Web Site at www.panasonic.com/repair. When shipping the unit, carefully pack, include all supplied accessories listed in the Owners Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at www.panasonic.com/BatteryHandling as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty. IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/
PROOF OF PURCHASE INDICATIN G DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantors Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/help or, contact us via the web at:
http://www.panasonic.com/ contactinfo You may also contact us directly at:
1-800-211-PANA (7262) Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST For hearing or speech impaired TTY users, TTY: 1-877-833-8855 Accessory Purchases (United States and Puerto Rico) Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com Or, send your request by E-mail to:
npcparts@us.panasonic.com You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST) Panasonic National Parts Center 20421 84th Ave S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express) For hearing or speech impaired TTY users, TTY: 1-866-605-1277 As of October 2012 The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. MODEL NUMBER SERIAL NUMBER SC-HTB370 User memo:
DATE OF PURCHASE ______________________________ DEALER NAME ___________________________________ DEALER ADDRESS________________________________ _________________________________________________ TELEPHONE NUMBER _____________________________ 34 RQT9777 Limited Warranty (ONLY FOR CANADA) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT - LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc. Technics Audio Product - One (1) year, parts and labour Panasonic BD/DVD Product - One (1) year, parts and labour Panasonic Audio Receivers - One (1) year, parts and labour Home Theater Systems Product - One (1) year, parts and labour This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold as is, and which product was delivered to you in new condition in the original packaging. IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED LIMITATIONS AND EXCLUSIONS This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are also excluded from coverage under this warranty. THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for illustration only.) In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory. WARRANTY SERVICE For product operation and information assistance, please contact:
PRODUCT OPERATION ASSISTANCE Customer Care Centre:
Telephone #: 1-800-561-5505 Fax #: (905) 238-2360 Email link: Support contact us email on www.panasonic.ca PRODUCT REPAIRS Please locate your nearest Authorized Servicentre. Link: Support Panasonic Servicentre locator on www.panasonic.ca IF YOU SHIP THE PRODUCT TO A SERVICENTRE Carefully pack and send prepaid, adequately insured and preferably in the original carton. Include details of the defect claimed, and proof of date of original purchase. RQT9777 35
-If you see this symbol-
Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
RQT9777-P F1212RK0
1 | OI Manual SC-HTB770 RQT9778-P 121012 | Users Manual | 1.79 MiB |
Owners Manual Home Theater Audio System Model No. SC-HTB770 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. If you have any questions, contact:
U.S.A. and Puerto Rico: 1-800-211-PANA (7262) Canada: 1-800-561-5505
RQT9778-P
IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1 2 3 4 5 6 7 8 9 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 2 RQT9778 WARNING Unit To reduce the risk of fire, electric shock or product damage, Do not expose this unit to rain, moisture, dripping or splashing. Do not place objects filled with liquids, such as vases, on this unit. Use only the recommended accessories. Do not remove covers. Do not repair this unit by yourself. Refer servicing to qualified service personnel. Power cord Install this unit so that the power cord can be unplugged from the socket outlet immediately if any problem occurs. Button-type battery (Lithium battery) Risk of fire, explosion and burns. Do not disassemble, heat above 60 oC (140 oF) or incinerate. DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water. If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor.
<For USA-California only>
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. special handling CAUTION Unit Do not place sources of naked flames, such as lighted candles, on this unit. Placement To reduce the risk of fire, electric shock or product damage, Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. Do not obstruct this units ventilation openings with newspapers, tablecloths, curtains, and similar items. Button-type battery (Lithium battery) Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. Keep out of reach of children. Insert with poles aligned. Mishandling of batteries can cause electrolyte leakage and may cause a fire. Remove the battery if you do not intend to use the remote control for a long period of time. Store in a cool, dark place. Do not heat or expose to flame. Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. Do not touch the terminals (
objects. Do not recharge, disassemble, remodel, heat or throw into fire.
) with metal and When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.
THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the follow ing measures:
Reorient or relocate the receiving antenna. Increase the separation betw een the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/T V technician for help. Any unauthorized changes or modifications to this equipment would void the users authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following tw o conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party:
Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support Contact:
Panasonic Consumer Marketing Company of North America Telephone N o.: 1-800-211-PANA (7262) THE FOLLOWING APPLIES ONLY IN CANADA. This device complies with RSS-GEN, RSS-210 of the IC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received, including interference that m ay cause undesired operation of the device. THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with F CC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (R F) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (R F) Exposure rules. This equipment has very low levels of RF energy that is deem ed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm (7 7/ 8 ) or more away from persons body (excluding extremities: hands, wrists, feet and ankles). RQT9778 3 About Bluetooth Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. Frequency band used This unit uses the 2.4 GHz frequency band. Certification of this device This unit conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. The action below are punishable by law in some countries:
Taking apart or modifying the unit. Removing specification indications. Restrictions of use Wireless transmission and/or usage with all Bluetooth equipped devices is not guaranteed. All devices must conform to standards set by Bluetooth SIG, Inc. Depending on the specifications and settings of a device, it can fail to connect or some operations can be different. This unit supports Bluetooth security features. But depending on the operating environment and/or settings, this security is possibly not sufficient. Transmit data wirelessly to this unit with caution. This unit cannot transmit data to a Bluetooth device. Range of use Use this device at a maximum range of 10 m (33 ft). The range can decrease depending on the environment, obstacles or interference. Interference from other devices When other devices use the same frequency as this unit, this unit may operate incorrectly or the sound may be distorted. To prevent interference from other devices:
Keep this unit away from other devices that emit radio frequency interference. Do not use this system and a wireless LAN device at the same time. Switch off any wireless LAN device. Intended usage This unit is for normal, general use only. Do not use this unit near an equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc). Unit care Clean this unit with a soft, dry cloth When dirt is heavy, wring a cloth moistened in water tightly to wipe the dirt, and then wipe it with a dry cloth. When cleaning this unit, use a fine cloth. Do not use tissues or other materials (towels, etc.) that can fall apart. Small grains may get stuck inside the speaker cover. Never use alcohol, paint thinner or benzine to clean this unit. Before using chemically-treated cloth, carefully read the instructions that came with the cloth. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of D olby Laboratories. Manufactured under license under U.S. Patent Nos:
5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of D TS, Inc. Product includes software. DTS, Inc. All Rights Reserved. HDMI, the HDMI Logo, and High-Definition M ultimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. HDAVI Control is a trademark of Panasonic Corporation. VIERA Link is a trademark of Panasonic Corporation. EZ Sync is a trademark of Panasonic Corporation. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. 4 RQT9778 Table of contents IMPORTANT SAFETY INSTRUCTIONS .......................................................................... 2 Unit care ........................................................................................................................... 4 About Bluetooth ............................................................................................................. 4 Table of contents............................................................................................................. 5 Before use Supplied items ................................................................................................................. 6 This unit (SC-HTB770) ............................................................................................................... 6 Accessories................................................................................................................................ 6 Control reference guide .................................................................................................. 7 This unit (Front).......................................................................................................................... 7 This unit (Rear) .......................................................................................................................... 8 Remote control ........................................................................................................................... 9 Getting started Step 1 Selecting the placement method ..................................................................... 10 The speaker system ................................................................................................................. 11 The active subwoofer ............................................................................................................... 11 Wireless interference ............................................................................................................... 11 Step 2 Assembling the speakers................................................................................. 12 When attaching the speakers to a wall .................................................................................... 12 When placing the speakers on a table ..................................................................................... 18 Additional speaker fall prevention measures ........................................................................... 22 Step 3 Connections ...................................................................................................... 24 Connection with the TV ............................................................................................................ 24 Connection with other devices ................................................................................................. 25 Speaker cable connection ........................................................................................................ 26 AC power supply cord connection............................................................................................ 26 Active subwoofer wireless connection ..................................................................................... 27 Bluetooth connection.............................................................................................................. 27 Operations Using this unit................................................................................................................ 28 3D sound ........................................................................................................................ 29 Audio output modes ................................................................................................................. 29 Linked operations with the TV
(VIERA LinkTMHDAVI ControlTM).......................................................................... 30 Advanced operations .................................................................................................... 31 Reference Troubleshooting............................................................................................................. 33 Specifications ................................................................................................................ 35 Indicator illumination..................................................................................................... 37 Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO) ................................................................. 38 Limited Warranty (ONLY FOR CANADA)..................................................................... 39 5 RQT9778 The illustrations shown may differ from your unit. Operations in this Owners Manual are described mainly with the remote control, but you can perform the operations on the main unit if the controls are the same. Supplied items This unit (SC-HTB770) 1 Main unit
(SU-HTB770) 1 Active subwoofer
(SB-HWA770) 1 Center speaker 2 Front speakers
(SB-HTB770)
(SB-HTB570) Accessories Check the supplied accessories before using this unit. 1 Remote control
(with a battery)
(N2QAYC000083) 2 AC power supply cords
(K2CB2YY00084) 3 Speaker cables
(REEX1266A: RED)
(REEX1267A: WHITE)
(REEX1268: GREEN) Length: 3 m (9.8 ft) 1 Metal bracket
(RML0760A) 6 Screws
(XYN5+J14FJK) 2 Speaker feet
(RKAX0042-K) 2 Stand necks
(RGK2444) 2 Side caps
(RGK2445: R)
(RGK2446: L) 2 Leg stands
(RGK2463) 2 Support legs
(RGK2464) 2 Speaker bases
(RGK2465)
(ONLY FOR CANADA) The enclosed French Canadian label sheet corresponds to the English display on the remote control and the top and rear of the main unit and active subwoofer. Product numbers are correct as of D ecember 2012. These may be subject to change. For U.S.A. and Puerto Rico:
To order accessories, refer to Accessory Purchases (United States and Puerto Rico) on page 38. For Canada: To order accessories, call the dealer from whom you have made your purchase. The supplied AC pow er supply cord is for use with this unit only. Do not use it with other equipment. Also, do not use cords from other equipment with this unit. 6 RQT9778 Control reference guide This unit (Front) 4 5 6 7 Main unit Active subwoofer 5 Sound mode indicators STANDARD indicator Lights when STANDARD is the current sound mode STADIUM/Dolby Digital indicator Lights when STADIUM is the current sound mode MUSIC/DTS indicator Lights when MUSIC is the current sound mode CINEMA/PCM indicator Lights when CINEMA is the current sound mode NEWS indicator Lights when NEWS is the current sound mode STEREO indicator Lights when STEREO is the current sound mode 6 Remote control signal sensor (
7 WIRELESS LINK indicator (
9) 27) 1 2 3 1
/I) Standby/on switch (
Press to switch the main unit from on to standby mode or vice versa. In standby mode, the main unit is still consuming a small amount of power. 2 Adjust the volume of this unit 3 Select the input source
BD/DVD
AUX3
TV
AUX2
AUX1 4 Input selector indicators Bluetooth indicator Lights blue when the Bluetooth device is the audio source TV indicator Lights green when the TV is the audio source BD/DVD indicator Lights amber when the device connected to the BD/DVD terminal is the audio source AUX1 indicator Lights amber when the device connected to the AUX1 terminal is the audio source AUX2 indicator Lights amber when the device connected to the AUX2 terminal is the audio source AUX3 indicator Lights amber when the device connected to the AUX3 terminal is the audio source The indicators will also blink in various conditions (
37) To indicate the current audio format, refer to page 31 (Audio format indicator) RQT9778 7 This unit (Rear) 1 A C IN 2 3 4 5 6 7 8 9 10 6 R 6 CEN TER 6
SP EA K ER S/H A UT -P A RL EU RS D IGITA L A U DIO IN TV
(O PT 1) A U X3
(O PT2 ) FO R SER VICE ON LY A U X 2
(H D M I3 ) A V IN A U X1
(H D M I2 ) B D /D V D B D /D V D
(H D M I1) A V O U T T V (A R C ) 26) 1 AC IN terminal (
2 Speaker terminals (
3 24) 4 AUX3 terminal (
5 USB port (for service use only) TV terminal (
26) 25) 25) 25) AUX2 terminal (
AUX1 terminal (
BD/DVD terminal (
6 7 8 9 HDMI OUT terminal (ARC compatible) (
10 Active subwoofer on/off button 25) 1 24) The I/D SET button is only used when the main unit is not paired with the active subwoofer (
35) 8 RQT9778 Remote control
Before using for the first time Remove the insulation sheet
. To replace a button-type battery Battery type: CR2025 (Lithium battery) 1 Turn the main unit on or off (
2 Adjust the dialog effect level (
3 Adjust the output level of the active subwoofer 28) 28) 28)
(bass sound) (
Adjust the volume of this unit (
4 5 Mute the sound (
28) 6 Select the input source (
TV
BD/DVD
AUX3
AUX2 28) 28)
AUX1 7 Select the Bluetooth device as the source
28) 8 Select the sound mode (
STANDARD
STEREO 28)
STADIUM
NEWS
MUSIC
CINEMA Set the button-type battery with its (
facing upward.
) mark Remote control operation range The remote control signal sensor is located on the main unit. Use the remote control within the correct operation range. Remote control signal sensor Operation range Distance: Within approx. 7 m
(23 ft) directly in front Angle: Approx. 30o left and right RQT9778 9 Step 1 Selecting the placement method Choose a placement method that suits you best. When attaching the speakers to a wall Place the speakers horizontally Place the front speakers vertically When placing the speakers on a table Place the speakers using the leg stands Place the speakers using the support legs and speaker feet Place the front speakers using the speaker bases 10 RQT9778 Page 12 Page 15 Page 18 Page 19 Page 20 Caution This unit is to be used only as indicated in these instructions. F ailure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. Do not attem pt to attach these speakers to a wall using m ethods other than those described in this manual. The speaker system Use a screwdriver (
Do not hold the speakers in one hand to avoid injury, you may drop the speakers when carrying them.
) for assembling the speakers. When attaching the speakers to a wall The wall or pillar on which the speakers are to be attached should be capable of supporting 33 kg (72.8 lbs) per screw. Consultation with a qualified installation specialist is recomm ended when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers, and personal injury. When placing the speakers in front of the TV The speakers may block or interfere w ith the TVs various sensors (C.A.T.S. (Contrast Automatic Tracking System) sensor, remote control sensor, etc.) and the 3D Eyew ear transmitters on a 3D compatible TV. If the stands are being used If the stands are not used Change the height of the stands and/or move the speakers further away from the TV. If the TV still does not function correctly, try removing the stands. Move the speakers further away from the T V. If the TV still does not function properly, try placing them beside the TV (
10). The active subwoofer When carrying the active subwoofer
Do not hold the active subwoofer from this opening. The parts inside may get damaged. Always hold the bottom of the active subwoofer when moving it. Wireless interference To avoid interference, maintain the following distances between the main unit/active subwoofer and other electronic devices that use the same radio frequency (2.4 GHz band).
Main unit/active subwoofer Wireless LAN: approx. 2 m (6 1/2 ft) Cordless phone and other electronic devices:
approx. 2 m (6 1/2 ft) Place the active subwoofer within a few meters of the main unit and in a horizontal position with the top panel faced upward. Do not use this unit in a metal cabinet. Placing the active subwoofer too close to the walls and corners can result in excessive bass. C over walls and windows with thick curtains. If irregular coloring occurs on your TV, turn the T V off for about 30 minutes. If it persists, move the speakers further away from the TV. Keep magnetized items away. Magnetized cards, watches, etc., can be damaged if placed too close to the active subwoofer and the speakers. RQT9778 11 Step 2 Assembling the speakers When attaching the speakers to a wall Place the speakers horizontally 2 Front speakers 1 Center speaker 1 Metal bracket 4 Screws 3 Speaker cables WHITE: Left RED: Right GREEN: Center For a safety measure to prevent the speakers from falling, refer to page 22. To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers. The two front speakers are interchangeable. Screw (supplied) Be sure to insert the screws follow ing the order as indicated in the illustration. Keep the screws out of reach of children to prevent swallowing. 12 RQT9778 Connect the speaker cables. Push Insert the wire fully.
: White
: Blue line Press into the groove. White Green Red Right speaker connector Center speaker connector Left speaker connector Insert the wire fully, taking care not to insert beyond the wire insulation. Drive a screw into the wall. Use the measurem ents indicated below to identify the screwing positions on the wall. Leave at least 20 mm (25/ 32 ) of space above and on each side of the speaker to allow enough space for fitting the speaker. The position on the wall where the screw is to be attached, as w ell as the screw, should be capable of supporting over 33 kg
(72.8 lbs). Keep the screws out of reach of children to prevent swallowing. At least 30 mm (1 3/16 ) 4.0 mm (5/32 ) 7.0 mm to Wall or pillar 5.5 mm to 6.5 mm (7/32 to 1/4 ) 9.4 mm (9/32 to 3/8 ) Front view (semi-transparent image) 248 mm (9 3/4 ) Wall mounting hole 745 mm (29 11/32 ) 238 mm (9 3/8 ) 20 mm (25/32 ) RQT9778 13 Fit the speaker securely onto the screw(s). Red connector: The speaker attached to the red connector cable is to be place on the right side White connector: The speaker attached to the white connector cable is to be place on the left side White Red Right speaker connector Left speaker connector DO Move the speaker so that the screw is in this position. DO NOT In this position, the speaker will likely fall if moved to the left or right. 14 RQT9778 Place the front speakers vertically 2 Front speakers 1 Center speaker 2 Stand necks 2 Side caps 3 Speaker cables WHITE: Left RED: Right GREEN: Center 4 Screws 2 Speaker feet For a safety measure to prevent the speakers from falling, refer to page 22. To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Attach the side caps and speaker feet to the center speaker and connect the speaker cable. Screw (supplied) Speaker foot (supplied) Center speaker connector Push Insert the wire fully.
: White
: Blue line Green RQT9778 15 Attach the stand neck. The two front speakers are interchangeable. Keep the screws out of reach of children to prevent swallowing. Screw (supplied) Connect the speaker cables. Insert the wire fully, taking care not to insert beyond the wire insulation. Push 16 RQT9778 Insert the wire fully.
: White
: Blue line Press into the groove. Drive a screw into the wall. Use the measurements indicated below to identify the screwing positions on the w all. Leave at least 20 mm (25/32 ) of space above and on each side of the front speaker to allow enough space for fitting the front speaker. The position in the wall w here the screw is to be attached as well as the screw should be capable of supporting over 33 kg (72.8 lbs). Keep the screws out of reach of children to prevent swallowing. Front speaker
(Rear view) 100 mm (3 15/16 ) 436 mm (17 5/32 ) 34 mm (1 11/32 ) Wall mounting hole At least 30 mm (1 3/16 ) 4.0 mm (5/32 ) 7.0 mm to Wall or pillar 5.5 mm to 6.5 mm (7/32 to 1/4 ) 9.4 mm (9/32 to 3/8 ) Fit the front speaker(s) securely onto the screw(s). Red connector: The speaker attached to the red connector cable is to be place on the right side. White connector: The speaker attached to the white connector cable is to be place on the left side. Left speaker connector Right speaker connector White Red DO Move the front speaker so that the screw is in this position. DO NOT In this position, the front speaker will likely fall if moved to the left or right. RQT9778 17 When placing the speakers on a table Place the speakers using the leg stands 2 Front speakers 1 Center speaker 1 Metal bracket 2 Leg stands 3 Speaker cables WHITE: Left RED: Right GREEN: Center 6 Screws For a safety measure to prevent the speakers from falling, refer to page 22. To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers following steps 1 and 2 of Place the speakers horizontally (
Attach the leg stands. 12). Red connector: With the speaker facing down, the speaker attached to the red connector cable is to be place on the left side. White connector: With the speaker facing down, the speaker attached to the white connector cable is to be place on the right side. Keep the screws out of reach of children to prevent swallowing. White Red Align the higher or lower holes with the projecting parts on the speaker. By changing the position that the stand is attached to the projecting parts, the height can be adjusted by 10 mm (13/32 ). Right speaker connector Left speaker connector Screw (supplied) Screw hole 18 RQT9778 Place the speakers using the support legs and speaker feet 2 Front speakers 1 Center speaker 1 Metal bracket 2 Support legs 3 Speaker cables WHITE: Left RED: Right GREEN: Center 6 Screws 2 Speaker feet For a safety measure to prevent the speakers from falling, refer to page 22. To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers following steps 1 and 2 of Place the speakers horizontally (
Attach the support legs and speaker feet. 12). Red connector: With the speaker facing down, the speaker attached to the red connector cable is to be place on the left side. White connector: With the speaker facing down, the speaker attached to the white connector cable is to be place on the right side. Keep the screws and the speaker feet out of reach of children to prevent sw allowing. Align the projecting parts on the speaker with support leg. Screw (supplied) Screw hole Speaker foot (supplied) White Red Right speaker connector Left speaker connector RQT9778 19 Place the front speakers using the speaker bases 2 Front speakers 1 Center speaker 2 Stand necks 2 Speaker bases 3 Speaker cables WHITE: Left RED: Right GREEN: Center 2 Side caps 6 Screws 2 Speaker feet For a safety measure to prevent the speakers from falling, refer to page 22. To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers following step 1 and 2 of Place the speakers vertically (
Insert the speaker cable through the speaker base and connect the speaker cables. 15). Be sure to insert the speaker cable through the threading hole as indicated in the illustration. (If the speaker cable is twisted, it might not fit through the opening. Straighten the speaker cable before inserting.) Insert the wire fully, taking care not to insert beyond the wire insulation. Insert the wire fully.
: White
: Blue line Press into the groove. Push 20 RQT9778 Attach the speaker base to the front speaker. The two front speakers are interchangeable. Keep the screws out of reach of children to prevent swallowing. Screw (supplied) Tighten securely. Align the projecting parts with the holes on the speaker. Press into the groove. Red connector: The speaker attached to the red connector cable is to be place on the right side. White connector: The speaker attached to the white connector cable is to be place on the left side. RQT9778 21 Additional speaker fall prevention measures To prevent the speakers from falling, it is recommended, as an additional protection measure, to attach the speakers to the wall or table with a fall prevention cord (hereafter cord). Consultation with a qualified installation specialist concerning the appropriate procedure when attaching to a concrete wall or a 13, 17). Improper attachment m ay result in damage to surface that may not have strong enough support is recommended (
the wall and speakers, and personal injury. Use a cord that is capable of supporting over 10 kg (22.05 lbs) (with a diameter of about 1.5 mm (1/16 )). The safety holder is to minimize the possibility of dam age and harm, but it does not guarantee this effect. Keep the screws out of reach of children to prevent swallowing. Make sure that the slack of the cord is minimal. When attaching the speakers to a wall Horizontal placement Vertical placement Cord Screw eye Wall Wall-mounted speakers If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 10 mm (13/32 ) apart from the tip, at an angle of 45o (as illustrated above). 22 RQT9778 When placing the speakers on a table Horizontal placement Vertical placement Cord Screw eye Depending on the placement of the speakers, the screwing position of the screw eye may differ. Wall Approx. 150 mm (5 29/32 ) If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 10 mm (13/32 ) apart from the tip, at an angle of 45o (as illustrated above). RQT9778 23 Step 3 Connections Turn off all equipment before connection and read the appropriate owners manual. Do not connect the AC power supply cord until all other connections are complete. HDMI The HDMI connection supports VIERA Link HDAVI Control (
30) when used with a compatible Panasonic TV. Use the High Speed HDMI Cables. It is recommended that you use Panasonics HDMI cable. Recommended part number (High Speed HDMI cable):
RP-CDHS15 (1.5 m/4.9 ft), RP-CDHS30 (3.0 m/9.8 ft), RP-CDHS50 (5.0 m/16.4 ft), etc. Non-HD MI-compliant cables cannot be utilized. Connection with the TV Verify if the TVs HDMI terminal is labeled HDMI (ARC). Connection differs depending on the label printed next to the HDMI terminal. Labeled HDMI (ARC): Connection [A]
Not Labeled HDMI (ARC): Connection [B]
What is ARC?
ARC is an abbreviation of Audio R eturn Channel, also known as H DMI ARC. It refers to one of the HDMI functions. When you connect the main unit to the terminal labeled HD MI (ARC) on the TV, the optical digital audio cable that is usually required in order to listen to sound from a TV is no longer required, and T V pictures and sound can be enjoyed w ith a single HD MI cable. Make the connection.
[A] Labeled HDMI (ARC) HDMI IN (ARC) Be sure to connect to the TVs ARC compatible terminal.
(Refer to the operating instructions for the TV.) TV HDMI cable
[B] Not labeled HDMI (ARC) HDMI IN TV OPTICAL OUT A C IN SPEAKERS/HAU T-PARLEURS DI GITA L AUD IOIN DIGITAL AUDIO IN TV
(OPT1) A C IN SPEAKERS/HAU T-PARLEURS DI GITA L AUD IO IN TV
(OPT1) AV OU T TV (ARC) AV OU T TV (A RC) AV OU T TV (ARC) AV OU T TV (A RC) HDMI cable Optical digital audio cable When you use the optical digital audio cable, insert the tip correctly into the terminal. 24 RQT9778 Connection with other devices You can direct the audio signal from the connected Blu-ray DiscTM player, DVD player, Set Top Box, etc. to this unit. When the device has an HDMI terminal Preparation Connect the main unit to the TV (
24). e.g., Blu-ray DiscTM player e.g., Set top box HDMI OUT HDMI OUT HDMI OUT e.g., Video game console HDMI cable HDMI standby pass-through AUX2
(HDMI3) AV IN AUX1
(HDMI2) BD/DVD BD/DVD
(HDMI1) A C IN SPEAKERS/HAU T-PARLEURS AU X2
(HDMI 3) AV I N AU X1
(HDMI 2) BD/D VD BD/D VD
(HDMI1) DI GITA L AUD IO IN Even if the main unit is in standby mode, the audio and/or video signal from the device connected to the BD/DVD, AUX1 or AUX2 terminal w ill be sent to the TV connected to the H DMI OUT terminal (the sound will not be output from this unit). When devices are connected to all BD/DVD , AUX1 and AUX2 terminals, audio and/or video signal of the device whose input is lastly selected is output. 3D compatibility Compatible with F ULL HD 3D T V and Blu-ray Disc TM player. The main unit can through pass the 3D video signal from a 3D compatible Blu-ray DiscTM player to a FU LL HD 3D TV. When the device has an optical digital audio output terminal TV e.g., Set top box OPTICAL OUT DIGITAL AUDIO IN AUX3
(OPT2) DI GITA L AUD IO IN AU X3
(OPT2) A C IN SPEAKERS/HAU T-PARLEURS Refer to the operating instructions of the respective devices for the optimal connection Optical digital audio cable RQT9778 25 Speaker cable connection Match the connector shape and connect to the terminals of the same color.
RED Right speaker connector GREEN Center speaker connector WHITE Left speaker connector AC power supply cord connection Connect only after all other connections are complete.
AC power supply cord To a household AC outlet 35) even when it is turned off. In the interest of This unit consumes a small amount of AC power (
power conservation, if you will not be using this unit for a long time, unplug it from the household AC outlet. Saving energy The main unit is designed to conserve its power consumption and save energy. The main unit will automatically switch to standby mode when no signal is input and no operation is performed for approx. 30 minutes. 26 RQT9778 Active subwoofer wireless connection Preparation Turn on the main unit. I]. Press [
Bluetooth connection By using the Bluetooth connection, you can listen to the sound from the Bluetooth audio device from this unit wirelessly Preparation Turn on the Bluetooth feature of the device and place the device near this unit. Pairing a device
, PAIRING]. Press [
indicator will blink quickly. Select SC-HTB770 from the Bluetooth devices Bluetooth menu. Once the Bluetooth device is connected, the stops flashing and lights up.
indicator Refer to the operating instructions of the Bluetooth device for further instruction on how to connect a Bluetooth device. If prompted for the passkey on the Bluetooth device, enter
0000. Active subwoofer on/off button [
Use this button to turn the active subwoofer on and off. I:
The active subwoofer is on I]
The active subwoofer is off The active subwoofer will still consume a small amount of power even when it is turned off (
) Pairing additional devices Check that the wireless link is activated. Press [
, PAIRING].
, Press and hold the [
until the indicator flashes quickly. Repeat step 2 of Pairing a device. PAIRING]
WIRELESS LINK indicator lights Red:
The wireless link is not activated. Green:
The wireless link is activated. You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used for the longest time will be replaced. This unit can only be connected to one device at a time. To change the sound quality, refer to Bluetooth communication mode on page 31. RQT9778 27 Using this unit Preparation Turn on the active subwoofer. Turn on the TV and/or connected device.
Press [
] to turn on the main unit. Select the source. To select
BD/DVD
TV
AUX3
(Bluetooth) Press
[INPUT SELECTOR]
This rem ote control cannot be used to control the operations of the connected devices.
AUX1
AUX2
When is selected as the source On the Bluetooth device:
Select this unit as the output source of the Bluetooth device and start the playback. 27) Make sure that the Bluetooth device is already paired with this unit. (
Playback may pause when a different source is selected. When BD/DVD , AUX1 or AUX2 is selected as the source On the connected device:
Select the TVs input for this unit and start the playback on the connected device. When AUX3 is selected as the source On the connected device:
Select the TVs input for the device connected to AUX3 terminal and start the playback on the connected device. Adjust the volume and sound effect level. To adjust the volume of this unit Press [ VOL
]. Volum e range: 1 to 100 To adjust the dialog effect level This setting will change the level of the Clear-
mode dialog effect. (
1
] to display the Press [ DIALOG LEVEL current level. 29) 2 While the level is displayed:
Press [ DIALOG LEVEL level.
] to adjust the Indication Effect level 4 3 2 1 Highest Lowest 1 To adjust the subwoofer level Press [ SUBWOOFER ] to display the current level. 2 While the level is displayed:
Press [ SUBWOOFER ] to adjust the level. The level indication pattern is the same as dialog effect level. To mute the sound Press [MUTE]. While muting, the sound mode indicators blink simultaneously. To cancel, press the button again or adjust the volume. Muting is canceled if the main unit is turned off. If the main unit does not operate as expected or sound is unusual, return the settings to the factory preset and operate the system again. (
33) The sound mode indicators blink from left to right (
The indicators will not blink when it has reached the maximum or minimum. If there is sound coming out of the TVs speakers, reduce the volume of the TV to its minimum. If the main unit is turned off w ith the volum e setting in the greater half (above 50), the main unit will automatically lower the volume to the middle (50) when the main unit is turned on (Volume limitation). To turn this function off, refer to page 33.
) or from right to left (
) while adjusting. 28 RQT9778 3D sound This unit provides a feeling that the sound and the image are as one. To change the applied effect, refer to Audio output modes. (
e.g., Image of 3D sound field right) Audio output modes By changing the audio output mode, it is possible to enjoy the sound that is suitable to the TV program or image from the connected device. To select the sound mode Press [SOUND].
STANDARD
STEREO
STADIUM
NEWS
CINEMA
MUSIC Dolby Virtual Speaker 3D surround effect Clear-mode dialog 3D sound With this effect you can enjoy a surround sound effect similar to 5.1ch. Adding to the Dolby Virtual Speaker effect, Panasonic has applied its own sound field controlling technology to expand the sound field forwards, backwards, upwards, and downwards, providing a sound with depth and force that better matches 3D images. Sports commentary and dialogs from TV dramas are heard as if the sound is coming from the TV, giving the feeling that the sound and the image are one. Also, the dialog will stand out from the other sounds during normal volume playback and when the volume is lowered for night time viewing. right) To turn off Dolby Virtual Speaker and the 3D surround effects, select ST EREO as the audio output mode.
To turn off the 3D surround and the Clear-mode dialog effects, refer to Only using the Dolby Virtual Speaker effect. (
32) The indicator for the selected sound mode lights. E.g., STANDARD
STANDARD
(Factory preset)
STADIUM
MUSIC
CINEMA
NEWS
STEREO Sound mode Produces a sound best suited for dramas and comedy shows. Produces a highly realistic sound for live broadcasts of sports. Re-creates the sound of musical instruments and songs with an expansive sound. Produces a powerful, three-
dimentional sound unique to movies. Enhances the voices of news and sports commentaries for clearer hearing. You can play any source in stereo. Dolby Virtual Speaker and 3D surround effects are turned off. The setting is maintained until it is changed again. When using the optical digital audio cable, D olby Virtual Speaker and the 3D surround effect will be temporarily canceled if the audio signals sampling frequency is greater than 48 kHz. RQT9778 29 Linked operations with the TV
(VIERA LinkTMHDAVI ControlTM) What is VIERA Link HDAVI Control?
VIERA Link TM is a new name for EZ SyncTM. VIERA Link HDAVI Control is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) under
HDAVI Control. You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details. Preparation 24, 25) Confirm that the HDMI connection has been made.
Set the HDAVI Control operations on the connected equipment (e.g., TV). For the optimal HDAVI Control operations change the following settings on the connected TV 1. Set the default speaker settings to this unit. 2 Set the speaker selection settings to this unit. Turn on all HDAVI Control compatible equipment and select the TVs input for this unit so that the
HDAVI Control function works properly. If a device is connected to the HDMI IN terminal, start play to check that the picture is displayed on the TV correctly. When the connection or settings are changed, repeat this procedure. 1 The availability and function of the settings may vary depending on the TV. Refer to the operating instructions for the T V for details. 2 If the TV has a default speaker setting within the VIERA Link setting items, choosing this unit as the default speaker will automatically change the speaker selection to this unit. VIERA Link HDAVI Control, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consum er Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers equipment that supports HDMI CEC cannot be guaranteed. This unit supports HDAVI Control 5 function.
HDAVI C ontrol 5 is the newest standard (current as of November, 2011) for Panasonics HDAVI Control compatible equipment. This standard is compatible w ith Panasonics conventional HDAVI equipment. Please refer to individual manuals for other manufacturers equipment supporting VIER A Link function. 30 RQT9778 What you can do with VIERA Link HDAVI Control To make sure that the audio is output from this unit, turn the main unit on by using the TVs remote control and selecting home theater from the speaker menu of VIERA Link menu. The availability and function of the settings may vary depending on the TV. Refer to the operating instructions for the TV for details. Speaker control You can select whether audio output is from this unit or the TV speakers by using the TV menu settings. Home theater This unit is active. When this unit is in standby mode, changing the T V speakers to this unit in the VIERA Link menu will autom atically turn this unit on and select TV as the source. You can control the volume setting of this unit using the volume or m ute button on the T V remote control. If you turn off this unit, TV speakers will be automatically activated. Audio will automatically be output from this unit if the TV is compatible to VIERA Link HDAVI Control 4 or later. TV TV speakers are active. The volume of this unit is set to its minimum. Automatic input switching When the following operations are performed, this unit will automatically change the input to the corresponding source. When play starts on an HDMI connected device. 3 When the TV input or the TV channel is changed. 3 If the speaker output setting on the TV is set to this unit, the TV and this unit turn on automatically (Power on link). Power off link When the TV is turned off, the main unit also turns off automatically. (This function does not work when Bluetooth is the source.) Automatic lip-sync function
(for HDAVI Control 3 or later) Delay between audio and video is automatically adjusted by adding time-lag to the audio output, enabling you to enjoy smooth audio for the picture. The delay information is automatically set if the T V is compatible to VIERA Link HDAVI Control 3 or later and the VIERA Link is set to on. Advanced operations Audio format indicator To display the current audio format, Press and hold [SOUND] for more than 4 sec. The current audio format is indicated for 5 sec. Auto gain control With this function, you can prevent sudden loud sounds. The output will be reduced automatically when the input exceeds a certain level. Press and hold [INPUT SELECTOR]
on remote controller for more than 4 sec.
STADIUM indicator blinks:
Dolby Digital is the audio format.
STANDARD indicator blinks:
Auto gain control is on.
MUSIC indicator blinks:
DTS is the audio format.
CINEMA indicator blinks:
PCM or LPCM is the audio format. The audio format status is also indicated for 5 sec if the audio format on the selected source (TV, Blu-ray Disc/
DVD Player, etc.) is changed. Changing the dual audio Change the dual audio from main to secondary. This setting will only work if the audio output setting on the connected TV or player, etc. is set to "Bitstream"
and dual audio is available in the audio source. Press and hold [MUTE] for more than 4 sec. While the setting is displayed, press
[MUTE] to change the setting. The indicator for the selected setting blinks for 20 sec and then exits the setting mode.
STANDARD indicator blinks (
Main (Factory preset)
STEREO indicator blinks (
Secondary
(SAP: Secondary Audio Program)
: Main and secondary
, The setting is maintained until it is changed again. The same setting is used for all digital audio sources.
STEREO indicator blinks:
Auto gain control is off.
(Factory preset) While the setting is displayed, press
[INPUT SELECTOR] to change the setting. The indicator for the selected setting blinks for 20 sec and then exits the setting mode. The setting changes each time [IN PUT SELECTOR] is pressed. The setting is maintained until it is changed again. Default setting of this function is OFF. Bluetooth communication mode You can select different modes to suit the type of connections which emphasis on connectivity or high quality audio. Make sure that a Bluetooth device is already paired with this unit. (
27)
Disable the Bluetooth connection of the device.
indicator will blink slowly. Press [LINK MODE, current mode.
] to display the
STANDARD indicator blinks:
MODE1 (Factory preset) Emphasis on connectivity
STEREO indicator blinks:
MODE2 Emphasis on audio quality While the mode is displayed, press
] to select the mode.
[LINK MODE, The setting changes each time [LINK MODE, pressed. The indicator for the selected setting blinks for 10 sec and then exits the setting mode. The setting is maintained until it is changed again.
] is RQT9778 31 Only using the Dolby Virtual Speaker effect Depending on your preference, It is possible to turn off the 3D surround effect and the clear-mode dialog effect. While pressing and holding [SOUND]
on the remote control, press and hold [VOL ] on the main unit for more than 4 sec. Others Remote control code When other Panasonic devices respond to this units remote control, change the remote control code on the main unit and the remote control. Preparation Turn off all other Panasonic products. Turn on the main unit.
STANDARD indicator blinks:
3D surround effect and clear-mode dialog effect is on.
STEREO indicator blinks:
3D surround effect and clear-mode dialog effect is off. While the setting is displayed, press
[SOUND] to change the setting. The setting changes each time [SOUND] is pressed. The indicator for the selected setting blinks for 20 sec and then exits the setting mode. This setting will be reset to on when this unit is turned off. When off is selected, the dialog effect level cannot be adjusted. Dimmer mode You can turn off dimmer mode and keep the LED indicators bright. While pressing and holding [INPUT SELECTOR] on the remote control, press and hold [ VOL] on the main unit to turn off Dimmer mode. The indicator for the current condition will turn brighter. The setting is maintained until it is changed again. Default setting of this function is on. Change the remote control code to code 2:
Aim the remote control at this units remote 1 control sensor. Press and hold [MUTE] and [
control for more than 4 sec. 2
] on the remote All the indicators will blink for 10 sec when the code of this unit is changed. The setting is maintained until it is changed again. If this unit does not operate after changing the code, repeat steps 1 and 2. To change the remote control code to code 1, repeat the steps above, but replace [
] with [INPU T SELECTOR]. To reduce the clear-mode dialog effect When the dialog does not sound natural while the volume is set low, it is possible to reduce the dialog enhancing effect as follows:
While pressing and holding [SOUND] on the remote control, press and hold [ VOL] on the main unit for more than 2 sec. All the indicators will blink once when the clear-mode dialog effect is reduced. To turn on dimmer mode, repeat the operation above. After performancing the operation, the indicator for the current condition will be dim. Even if clear-mode dialog effect is reduced, dialog effect level is still adjustable. To reset the setting, return to the factory preset. (
33) 32 RQT9778 To turn off VIERA Link HDAVI Control When HDAVI Control compatible equipment does not work well with this unit, for example, it is possible to turn off this function as follows:
When VIERA Link is turned off the ARC function is not available. Be sure to connect the optical digital audio cable. (
24) 1 While pressing and holding [MUTE] on the remote control, press and hold [ VOL] on the main unit for more than 4 sec. 2 After the setting has changed, turn off all the connected devices and then turn them on again. All the indicators will blink once when VIERA Link HDAVI Control is turned off. To reset the setting, return to the factory preset. (
right) To turn off the volume limitation If a state of the lowered volume disturbs you every time this unit turns on, for example, it is possible to turn off this function as follows:
While pressing and holding [MUTE] on the remote control, press and hold [VOL for more than 2 sec.
] on the main unit All the indicators will blink once when the volum e limitation is turned off. To reset the setting, return to the factory preset. (
right) Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, refer to Customer Services Directory (United States and Puerto Rico) on page 38 if you reside in the U.S.A. or Puerto Rico, or refer to WARRANTY SERVICE on page 39 if you reside in Canada.
/I] on the main To return to the factory preset. While the main unit is on, press [
unit for more than 4 sec.
(All the indicators will blink twice when the main unit is reset.) If this unit does not operate as expected, returning the settings to the factory preset may solve the problem. The remote control code will return to when the main unit is returned to the factory preset. To change the remote control code, refer to page 32. General operation No power. Insert the AC power supply cord securely. (
After turning the main unit on, if the indicators blink and the main unit immediately turns off, unplug the AC power supply cord and consult your dealer. 26) 9) The remote control does not work properly. The battery is depleted. Replace it with a new one.
It is possible that the insulation sheet has not been removed. Remove the insulation sheet. (
It may be necessary to set the code of the remote control again after changing the battery of the remote control. (
Use the remote control within the correct operation range. (
32) 9) 9) The TV indicator blinks. Remove the AC power supply cord and consult your dealer. If there are any other indicators blinking, be sure to inform your dealer about the blinking indicators. The main unit is automatically switched to standby mode. The main unit will automatically switch to standby mode when no signal is input and no operation is performed for approx. 30 minutes. (
26) The main unit is turned off when the TVs speakers are selected in the speaker control. This is a normal feature when using VIERA Link (HDAVI Control 4 or later). Please read the operating instructions for the TV for details about its power save feature. (
30) RQT9778 33 Sound from the device is uneven. The device is out of the 10 m (33 ft) communication range. Bring the device closer to the main unit. Remove any obstacle between the main unit and the device. Switch off any wireless LAN device. Select MODE1 for stable communication. (
31) Sound No sound (or image). 28) 35) 24) Turn muting off. (
Check the connections to the other devices. (
24, 25) Make sure that the received audio signal is compatible with this unit. (
Turn this unit off and then on again. If this unit is connected to the TV with only an HDMI cable, make sure that the TVs HDMI terminal is labeled
HDMI (ARC). If not, connect using the optical digital audio cable. (
If this unit is connected to a Panasonic TV and turned on using the button on the main unit or the remote control, sound might not be output from this unit. In this case, turn the main unit on using the TVs remote control. (
If the connections are correct, there might be a problem with the cables. Redo the connections with different cables. Check the audio output settings on the connected device. If the BD/DVD indicator flashes and there is no audio output, try the following. 30) Turn the connected device off and then on. Turn off this unit, remove the HDMI cable, then reconnect the HDMI cable and turn this unit back on. The dual audio cannot be changed from main to secondary. If the audio received from the connected device is not
Dolby Dual Mono or the output setting is not Bitstream, the setting cannot be changed from this unit. Change the setting on the connected device. The volume is lowered when this unit is turned on. If the main unit is turned off with the volume setting in the greater half (above 50), the main unit will automatically lower the volume to the middle (50) when the main unit is turned on. (
33) The dialog is too persistent or the dialog does not sound natural. This unit has a function to make the dialog stand out when the volume is low. (
32) HDMI This unit does not operate correctly. If the HDMI cable is connected to the wrong terminal
(HDMI IN or HDMI OUT), this unit will not operate correctly. Turn the main unit off, disconnect the AC power 24, 25) supply cord and reconnect the HDMI cable(s). (
VIERA Link related operations no longer function properly. Check the VIERA Link setting on the connected devices. Have you turned the VIERA Link settings off? (
When the HDMI connections are changed, after a power failure or after the AC power supply cord has been removed, VIERA Link operations may not function properly. 33) Turn on all the devices that are connected to the TV with an HDMI cable and then turn the TV on. Turn off the VIERA Link settings of the TV and turn it on again. For details refer to the operating instructions for the TV. While this unit and the TV are connected with the HDMI cable, turn on the TV and then remove the main units AC power supply cord and reconnect it again. The first few seconds of audio cannot be heard when using the HDMI connection. This may occur during DVD-Video chapter playback. Change the digital audio output setting on the connected device from Bitstream to PCM. When operating an HDMI compatible device of a different brand, the main unit reacts in an unwanted manner. HDAVI Control commands may use a different signal depending on the brand of the device. In this case, turn VIERA Link off. (
33) Bluetooth Pairing cannot be done. Check the Bluetooth device condition. The device cannot be connected. The pairing of the device was unsuccessful. Try pairing the device again. The pairing of the device has been replaced. Pair the device again. (
This unit might be connected to a different device. Disconnect the other device and try pairing the device again. 27) The device is connected but audio cannot be heard through this unit. For some built-in Bluetooth devices, you have to set the audio output to SC-HTB770 manually. Read the operating instructions for the device for details. 34 RQT9778 There is no audio. The power of the main unit turns off automatically.
(When the main unit detects a problem, a safety measure is activated and the main unit automatically switches to standby mode.) There is a problem with the amplifier. Is the volume extremely high?
If so, lower the volume. Is this unit placed in an extremely hot place?
If so, move this unit to a cooler place and wait a few moments and then try to turn it on again. If the problem persists, confirm the TV indicator and BD/DVD indicator blink, turn this unit off, remove the AC power supply cord and consult your dealer. Please be sure to remember the indicators that were blinking and inform the dealer. Active Subwoofer No power. Ensure the AC power supply cord of the active subwoofer is connected properly. After turning the subwoofer on, it immediately turns off. Unplug the AC power supply cord and consult your dealer. No sound from the subwoofer. Check that the active subwoofer is turned on. Check that the wireless link indicator lights green.
27) The wireless link indicator lights red. There is no link between this unit and the active subwoofer. Check that this unit is turned on. Turn the active subwoofer off and then back on. Alternatively, turn the active subwoofer off, disconnect the AC power supply cord and then reconnect it. The active subwoofer and the main unit may not be paired correctly. Try the following operation. (Wireless pairing) Turn on the main unit and active subwoofer. Press [ID SET] on the rear of the active subwoofer.
(The WIRELESS LINK indicator will light red and green alternately.) While pressing and holding [INPUT SELECTOR] on remote control, press and hold [VOL
] on the main unit for more than 4 sec. (The BD/DVD indicator will blink and sound mode indicators light up in sequence.) When the wireless pairing is successful, BD/DVD indicator will stop flashing and WIRELESS LINK indicator lights green. Turn the main unit off and on. Consult your dealer if the problem persists. Specifications AMPLIFIER SECTION RMS output power 10 % total harmonic distortion Subwoofer ch 120 W per channel (100 Hz, 8 60 W per channel (1 kHz, 6 Front ch (L, R ch) Center ch (C ch) 60 W per channel (1 kHz, 6 Total RMS Dolby Digital mode power FTC output power 1.0 % total harmonic distortion Subwoofer ch Front ch (L, R ch) Center ch (C ch) 60 Hz to 120 Hz 40 W (8 120 Hz to 20 kHz 25 W (6 Total FTC Dolby Digital mode power 120 Hz to 20 kHz 25 W (6
) 300 W 115 W WIRELESS SECTION Wireless module Frequency Range Number of channels 2.4 GHz band 3 TERMINAL SECTION HDAVI Control HDMI AV input (BD/DVD, AUX1) This unit supports HDAVI Control 5 function. 2 Type A (19 pin) 1 Type A (19 pin) HDMI AV output (TV (ARC)) Input connector Output connector Digital audio input Optical digital input (TV, AUX2) 2 Sampling frequency 32 kHz, 44.1 kHz, 48 kHz 88.2 kHz, 96 kHz (only LPCM) Audio format LPCM, Dolby Digital, DTS RQT9778 35 SPEAKER SECTION SPEAKER GENERAL Front speakers 2 way, 2 speaker system (Bass reflex type) Speaker unit(s) Impedance 6 Horizontal placement using the stands Dimensions (W H D) Woofer Tweeter 6.5 cm (2 1/2 ) cone type 1 Mass (Weight) Impedance 6 Horizontal placement (for wall mount) Mass (Weight) 1 way, 1 speaker system (Bass reflex type) Dimensions (W H D) Power consumption Main unit: 37 W Active subwoofer: 20 W Mass (Weight) 956 mm 102 mm 74 mm 2 29/32 ) 1.61 kg (3.7 lbs)
(37 5/8 4 1/32 Horizontal placement using the speaker feet and the support legs Dimensions (W H D) 956 mm 78 mm 55 mm 2 5/32 ) 1.57 kg (3.5 lbs)
(37 5/8 3 1/16 Dimensions (W H D) Mass (Weight) Vertical placement using the speaker bases 956 mm 75 mm 35 mm 1 3/8 ) 1.54 kg (3.5 lbs)
(37 5/8 2 15/16 148 mm 528 mm 145 mm 20 25/32 5 23/32 ) 0.88 kg (1.98 lbs)
(5 13/16 Mass (Weight) Vertical placement (for wall mount) Dimensions (W H D) 75 mm 478 mm 35 mm 1 3/8 ) 0.77 kg (1.76 lbs) 18 13/16
(2 15/16 Bluetooth SECTION Bluetooth system specification Wireless equipment classification Supported profiles Frequency band Operating distance V3.0 Class 2 (2.5 mW) A2DP, AVRCP 2.4 GHz band
(Adaptive Frequency Hopping) 10 m (33 ft) Line of Sight 1 Specifications are subject to change without notice. 2 Weight and dimensions are approximate. 3 Total harmonic distortion is measured by a digital spectrum analyzer. 2.5 cm (1 ) semi-dome type 1 Frequency range 100 Hz to 30 kHz ( 16 dB) 150 Hz to 25 kHz ( 10 dB) Center speaker 1 way, 1 speaker system Speaker unit(s) Full range 6.5 cm (2 1/2 ) cone type 1 Frequency range 100 Hz to 30 kHz ( 16 dB) 150 Hz to 25 kHz ( 10 dB) Active subwoofer Woofer Frequency range 16 cm (6 1/2 ) cone type 1 30 Hz to 180 Hz ( 16 dB) 35 Hz to 160 Hz ( 10 dB) GENERAL In standby condition Main unit (When the other connected devicesare turned off) Active subwoofer:
Power supply Dimensions (W H D) Approx. 0.25 W Approx. 0.2 W AC 120 V, 60 Hz Main unit Cabinet dimension Maximum outer dimension 310 mm 44 mm 195 mm 7 11/16 )
(12 7/32 1 23/32 310 mm 45 mm 202 mm 7 15/16 )
(12 7/32 1 25/32 180 mm 408 mm 306 mm 12 1/16 ) 16 1/16
(7 3/32 1.1 kg (2.4 lbs) 5.2 kg (11.47 lbs) Active subwoofer Mass (Weight) Main unit Active subwoofer Operating temperature range Operating humidity range 0 oC to 40 oC ( 32 oF to 104 oF) 20 % to 80 % RH (no condensation) 36 RQT9778 Indicator illumination The indicators display the condition of this unit by flashing. The indicator patterns illustrated below are displayed during normal operational conditions. They do not refer to the indications of a problem. Refer to Troubleshooting (
Indicator 33) if the indicators do not light up as illustrated below. Description The BD/DVD indicator blinks 2 and sound mode indicators light up in sequence for 1 minute. When the main unit is in wireless pairing mode with the active subwoofer (
35) The indicator blinks for 20 sec. 32) When 3D surround effect and clear-mode dialog effect are on (
When the dual audio setting is Main (
When the auto gain control is on (
When the Bluetooth communication is mode 1 (
31) 31) 31)
The indicators blink for 5 sec. When the audio format is Dolby Digital (
31) The indicator blinks for 5 sec. When the audio format is DTS (
31) The indicators blink for 5 sec. When the audio format is PCM (
31) The indicator blinks for 20 sec. 32) When 3D surround effect and clear-mode dialog effect are off (
When the dual audio setting is Secondary (SAP:
Secondary Audio Program) (
31) When the auto gain control is off (
When the Bluetooth communication is mode 2 (
31) 31) The indicators blink for 20 sec. When the dual audio setting is Main and Secondary
31) The indicators blink for 10 sec. When the remote control code is changed (
32) The indicators blink once. When changing the setting (To reduce the clear-mode dialog effect, To turn off VIERA Link HDAVI Control, and To turn off the volume limitation) (
32) Bluetooth indicator blinks quickly. When the main unit is ready for pairing Bluetooth indicator blinks slowly. When the main unit is waiting to connect Bluetooth indicator turns on. When the main unit is connected with a Bluetooth device 1 The selected source indicator will also light. 2 The BD/DVD indicator stops blinking and lights once the wireless pairing is successful. RQT9778 37 Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO) Panasonic Consumer Marketing Company of North America, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Products Limited Warranty Limited Warranty Coverage
(For USA and Puerto Rico Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Marketing Company of North America
(referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or
(c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor. Product or Part Name Home Theater Audio System All included Accessories
(Except Non-Rechargeable Batteries) Parts 1 year 90 days Only Non-Rechargeable Batteries 10 days Labor 1 year Not Applicable Not Applicable During the Labor warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold as is. Mail-In Service For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship the product prepaid to:
Panasonic Exchange Center 4900 George McVay Drive Suite B McAllen, TX 78503 panacare@us.panasonic.com Online Repair Request To submit a new repair request and for quick repair status visit our Web Site at www.panasonic.com/repair. When shipping the unit, carefully pack, include all supplied accessories listed in the Owners Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at www.panasonic.com/BatteryHandling as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty. IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/
PROOF OF PURCHASE INDICATIN G DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantors Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/help or, contact us via the web at:
http://www.panasonic.com/ contactinfo You may also contact us directly at:
1-800-211-PANA (7262) Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST For hearing or speech impaired TTY users, TTY: 1-877-833-8855 Accessory Purchases (United States and Puerto Rico) Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com Or, send your request by E-mail to:
npcparts@us.panasonic.com You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST) Panasonic National Parts Center 20421 84th Ave S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express) For hearing or speech impaired TTY users, TTY: 1-866-605-1277 As of October 2012 The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. MODEL NUMBER SERIAL NUMBER SC-HTB770 User memo:
DATE OF PURCHASE ______________________________ DEALER NAME ___________________________________ DEALER ADDRESS________________________________ _________________________________________________ TELEPHONE NUMBER _____________________________ 38 RQT9778 Limited Warranty (ONLY FOR CANADA) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT - LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc. Technics Audio Product - One (1) year, parts and labour Panasonic BD/DVD Product - One (1) year, parts and labour Panasonic Audio Receivers - One (1) year, parts and labour Home Theater Systems Product - One (1) year, parts and labour This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold as is, and which product was delivered to you in new condition in the original packaging. IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED LIMITATIONS AND EXCLUSIONS This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are also excluded from coverage under this warranty. THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for illustration only.) In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory. WARRANTY SERVICE For product operation and information assistance, please contact:
PRODUCT OPERATION ASSISTANCE Customer Care Centre:
Telephone #: 1-800-561-5505 Fax #: (905) 238-2360 Email link: Support contact us email on www.panasonic.ca PRODUCT REPAIRS Please locate your nearest Authorized Servicentre. Link: Support Panasonic Servicentre locator on www.panasonic.ca IF YOU SHIP THE PRODUCT TO A SERVICENTRE Carefully pack and send prepaid, adequately insured and preferably in the original carton. Include details of the defect claimed, and proof of date of original purchase. RQT9778 39
-If you see this symbol-
Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
RQT9778-P F1212RK0
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-11-15 | 2403.35 ~ 2477.35 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2012-11-15
|
||||
1 | Applicant's complete, legal business name |
Panasonic Corporation of North America
|
||||
1 | FCC Registration Number (FRN) |
0003762242
|
||||
1 | Physical Address |
Two Riverfront Plaza, 9th Floor
|
||||
1 |
Newark, New Jersey 07102-5490
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
k******@tuv-sud-psb.sg
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
ACJ
|
||||
1 | Equipment Product Code |
11BT1301
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
B**** B******
|
||||
1 | Title |
Project Manager
|
||||
1 | Telephone Number |
201-3********
|
||||
1 | Fax Number |
201-3********
|
||||
1 |
B******@us.panasonic.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Panasonic AVC Networks
|
||||
1 | Name |
Y**** H**** P****
|
||||
1 | Physical Address |
202, Bedok South Avenue 1
|
||||
1 |
469332
|
|||||
1 |
Singapore
|
|||||
1 | Telephone Number |
+6562********
|
||||
1 | Fax Number |
+6562********
|
||||
1 |
v******@sg.panasonic.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
TV SD PSB Pte Ltd
|
||||
1 | Name |
L****** C****** H****
|
||||
1 | Physical Address |
1 Science Park Drive
|
||||
1 |
118221
|
|||||
1 |
Singapore
|
|||||
1 | Telephone Number |
+6568********
|
||||
1 | Fax Number |
+6567********
|
||||
1 |
c******@tuv-sud-psb.sg
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/30/2012 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Transmitter Module | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Single Modular Approval | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Single modular approval. Power output is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. The end-user must be provided with any information required to satisfy RF exposure compliance for the final host device. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
TUV SUD PSB Pte Ltd
|
||||
1 | Name |
H**** T******
|
||||
1 | Telephone Number |
65-68********
|
||||
1 | Fax Number |
65-67********
|
||||
1 |
h******@tuv-sud-psb.sg
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2403.35000000 | 2477.35000000 | 0.0009000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC