FCC ID: ACJ96NKX-TGCA35A UPCS Cordless Handset

Operating Instructions Model No. Cordless Telephone KX-TGC350 KX-TGC352 Cordless Telephone with Digital Answering Machine KX-TGC360 KX-TGC362 KX-TG3620 Model No. Model shown is KX-TGC350. Before initial use, see Getting Started on page 8. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte Gua Rpida Espaola, pgina 36. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A. Please register your product: http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 1 2015/11/16 9:16:32 Answering system settings .........................26 Useful Information Voicemail service .......................................28 Error messages ..........................................29 Troubleshooting .........................................29 Wall mounting (Charger only) ....................32 FCC and other information .........................33 Gua Rpida Espaola Gua Rpida Espaola ...............................36 Appendix Customer services .....................................40 Limited Warranty (ONLY FOR U.S.A.) .......41 Index Index...........................................................43 Table of Contents Introduction Model composition .......................................3 Accessory information ..................................3 Important Information For your safety .............................................5 Important safety instructions ........................6 For best performance ...................................6 Other information .........................................7 Specifications ...............................................7 Getting Started Setting up .....................................................8 Controls ........................................................9 Display icons ..............................................10 Language settings ......................................10 Date and time .............................................10 Recording your greeting message

(KX-TGC360 series) ...................................11 Other settings .............................................11 Making/Answering Calls Making calls ...............................................12 Answering calls ..........................................12 Useful features during a call .......................12 Intercom .....................................................13 Phonebook Phonebook .................................................14 Speed dial ..................................................15 Programming Menu list .....................................................17 Alarm ..........................................................20 Silent mode ................................................20 Call block ....................................................20 Other programming ....................................21 Registering a handset to the base unit .......22 Caller ID Service Using Caller ID service ...............................23 Caller list ....................................................23 Answering System Answering system (KX-TGC360 series) ....24 Turning the answering system on/off .........24 Greeting message ......................................24 Listening to messages ...............................24 Remote operation .......................................25 2 TGC35x_36x(en)_1116_ver012.pdf 2 2015/11/16 9:16:35 Introduction Model composition Series Model No. Base unit Part No. Handset Part No. Quantity KX-TGC350 series KX-TGC360 series KX-TGC350 KX-TGC350 KX-TGCA35 KX-TGC352 KX-TGC350 KX-TGCA35 KX-TGC360 KX-TGC360 KX-TGCA35 KX-TGC362 KX-TGC360 KX-TGCA35 KX-TG3620 KX-TGC360 KX-TGCA35 1 2 1 2 1 Accessory information Supplied accessories No. Accessory item/Part number A AC adaptor/PNLV226-0X B Telephone line cord/

PQJA10075Y (Black) or PQJA10075Z (Transparence) C Rechargeable batteries/HHR-4DPA D Handset cover*1/PNYNTGCA35BR E Charger/PNLC1073ZB Quantity KX-TGC350 KX-TGC360 KX-TG3620 KX-TGC352 KX-TGC362 1 1 2 1 1 1 4 2 1

*1 The handset cover comes attached to the handset. A B C D E For assistance, please visit http://shop.panasonic.com/support 3 TGC35x_36x(en)_1116_ver012.pdf 3 2015/11/16 9:16:35 Introduction Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 40). Accessory item Model number/Specifications Rechargeable batteries HHR-4DPA R To order, please visit http://shop.panasonic.com/support Battery type:

Nickel metal hydride (Ni-MH) 2 x AAA (R03) size for each handset Range extender KX-TGA405*1

*1 By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. This product can be purchased online. Please visit our Web site: http://shop.panasonic.com/support Expanding your phone system Handset (optional): KX-TGDA20 You can expand your phone system by registering optional handsets (6 max.) to a single base unit. 4 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 4 2015/11/16 9:16:35 For your safety To prevent severe injury and loss of life/

property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. R Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at http://shop.panasonic.com/support R Unplug from power outlets and never touch the inside of the product if its casing has been broken open. R Never touch the plug with wet hands. Danger of electric shock exists. Installation R To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. R Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. Important Information R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects. Operating safeguards R Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. R Do not disassemble the product. R Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use. Medical R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF

(radio frequency) energy. (The product operates in the frequency range of 1.92 GHz to 1.93 GHz, and the RF transmission power is 115 mW (max.).) R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. CAUTION Installation and location R Never install telephone wiring during an electrical storm. R Never install telephone line jacks in wet locations unless the jack is specifically designed for wet locations. R Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. R Use caution when installing or modifying telephone lines. R The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. For assistance, please visit http://shop.panasonic.com/support 5 TGC35x_36x(en)_1116_ver012.pdf 5 2015/11/16 9:16:35 Important Information R This product is unable to make calls when:

the handset batteries need recharging or have failed. there is a power failure. Battery R We recommend using the batteries noted on page 4. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed. R Exercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns. R Charge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual. R Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode. Attention:

A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY

(1-800-822-8837) for information on how to recycle this battery. Important safety instructions When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS For best performance Environment R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R When you leave the product unused for a long period of time, unplug the product from the power outlet. R The product should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 0 C (32 F) or greater than 40 C (104 F). Damp basements should also be avoided. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. 6 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 6 2015/11/16 9:16:35 Important Information Other information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Specifications R Standard:

DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) Notice for product disposal, transfer, or return R This product can store your private/

confidential information. To protect your privacy/confidentiality, we recommend that you erase information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product. Notice R Frequency range:

1.92 GHz to 1.93 GHz R RF transmission power:

115 mW (max.) R Power source:

120 V AC, 60 Hz R Power consumption:

Base unit*1:

Standby: Approx. 0.6 W Maximum: Approx. 3.2 W Base unit*2:

Standby: Approx. 0.7 W Maximum: Approx. 3.5 W Charger:

Standby: Approx. 0.1 W Maximum: Approx. 1.8 W R Operating conditions:

0 C 40 C (32 F 104 F), 20 % 80 %

relative air humidity (dry)

*1 KX-TGC350 series

*2 KX-TGC360 series For assistance, please visit http://shop.panasonic.com/support 7 TGC35x_36x(en)_1116_ver012.pdf 7 2015/11/16 9:16:35 Getting Started Setting up Connections Connect the AC adaptor to the unit by pressing the plug firmly. Fasten the cord by hooking it. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit, then to the single-line telephone jack

(RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Battery installation R USE ONLY rechargeable Ni-MH batteries

). AAA (R03) size (

R Do NOT use alkaline/manganese/Ni-Cd batteries. R Confirm correct polarities (

). Battery charging Charge for about 7 hours. Note for battery charging R Clean the charge contacts with a soft and dry cloth once a month. Before cleaning the unit, disconnect from power outlets and any telephone line cords. Battery level Icon Battery level High Medium Low Needs charging. Empty Panasonic Ni-MH battery performance (supplied batteries) Operation Operating time In continuous use 9 hours max.*1 Not in use (standby) 4 days max.*1

*1 If eco mode is on. 8 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 8 2015/11/16 9:16:35 12344511 Note:

R Actual battery performance depends on usage and ambient environment. Intelligent eco mode This feature automatically reduces handset power consumption whenever possible. When it is activate, is displayed. Controls Handset Getting Started N (TALK) M Dial keypad (*: TONE) MZN (SP-PHONE: Speakerphone) Microphone Receiver Display MOFFN MFLASHNMCALL WAITN MINTERCOMN R This feature is available between 2 handsets. Charge contacts Soft keys Navigator key MDN, MCN, MFN, or MEN: Scroll through various lists and items. VOL. (Volume: MDN or MCN): Adjust the receiver or speaker volume while talking.

: View the phonebook entry. MFN MEN REDIAL: View the redial list. MCN CID (Caller ID): View the caller list. Base unit n KX-TGC350 series Charge contacts N (LOCATOR) M Speaker For assistance, please visit http://shop.panasonic.com/support 9 TGC35x_36x(en)_1116_ver012.pdf 9 2015/11/16 9:16:35 ABACJKHBGADFIEAB Getting Started n KX-TGC360 series Item Meaning Ringer volume is off.

(page 12) Silent mode is on. (page 20) Call sharing mode is off.

(page 19) Alarm is on. (page 20) Handset number Battery level Blocked call (page 20) Clarity booster is on automatically. Answering system is being used by the base unit

(KX-TGC360 series) or another handset. Someone is using the line. In use Line in use Language settings Display language 1 MMENUN#110 2 MbN: Select the desired setting. a MSAVEN a MOFFN Voice guidance language

(KX-TGC360 series) 1 MMENUN#112 2 MbN: Select the desired setting. a MSAVEN a MOFFN Date and time 1 MMENUN#101 N (LOCATOR) Charge contacts M N (Repeat) MjN/MkN (VOLUME: Volume up/down) M Speaker MERASEN ANSWER ON/OFF indicator MANSWER ON/OFFN M N (PLAY/STOP) Message indicator M N (Skip) Display icons Handset display items Item Meaning Within base unit range Out of base unit range The line is in use. R When flashing:

The call is put on hold. R When flashing rapidly: An incoming call is now being received. Eco mode is on. (page 9) Speakerphone is on.

(page 12) Z 10 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 10 2015/11/16 9:16:35 AGEFDCBHIJK Getting Started 2 Enter the current month, date, and year by selecting 2 digits for each. Example: July 15, 2016 07 15 16 3 MOKN 4 Enter the current hour and minute

(12-hour clock format) by selecting 2 digits for each. Example: 9:30 09 30 5 *: Select AM or PM. 6 MSAVEN a MOFFN Note:

R Either 12-hour or 24-hour time format is used depending on the display language. Recording your greeting message (KX-TGC360 series) You can record your own greeting message instead of using a pre-recorded greeting message. See page 24 for details. 1 MMENUN#302 2 MbN: Yes a MSELECTN 3 Record a greeting message. a MSTOPN a MOFFN Other settings Dialing mode 1 MMENUN#120 2 MbN: Select the desired setting. a MSAVEN a MOFFN For assistance, please visit http://shop.panasonic.com/support 11 TGC35x_36x(en)_1116_ver012.pdf 11 2015/11/16 9:16:35 Making/Answering Calls Making calls 1 Lift the handset and dial the phone number. R To correct a digit, press MCLEARN. 2 M N or MZN R To adjust the receiver or speaker volume, press MDN or MCN repeatedly. 3 When you finish talking, press MOFFN. Note:

R To switch back to the receiver, press MZN/

M N. Making a call using the redial list The last 5 phone numbers dialed are stored in the redial list. 1 MEN REDIAL 2 MbN: Select the desired entry. a M N Pause (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 15). Example: If you need to dial the line access number 9 when making outside calls with a PBX:

1 9 a MDN (Pause) 2 Dial the phone number. a M N Answering calls 1 Lift the handset and press M when the unit rings. N or M N 2 When you finish talking, press MOFFN. Auto talk: You can answer calls simply by lifting the handset (page 19). Temporary handset ringer off: Press M N. Adjusting the handset ringer volume Press MDN or MCN repeatedly while ringing. Adjusting the base unit ringer volume

(KX-TGC360 series) Press MjN or MkN repeatedly. R To turn the ringer off, press and hold MkN until the unit beeps. Useful features during a call Hold 1 Press MMENUN during an outside call. 2 MbN: Hold a MSELECTN 3 To release hold, press M Note:

R After holding for 10 minutes, the call is N. disconnected. Mute 1 Press MMUTEN during a call. 2 To return to the call, press MMUTEN. Flash MFLASHN allows you to use the special features of your host PBX. Note:

R To change the flash time, see page 19. For call waiting or Call Waiting Caller ID service users To use call waiting or Call Waiting Caller ID, you must first subscribe with your phone service provider. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone. 12 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 12 2015/11/16 9:16:36 Making/Answering Calls R To put the outside call on hold:

MMENUN a MbN: Hold a MSELECTN To resume the conference: MMENUN a MbN: Conf. a MSELECTN R To cancel the conference: MMENUN a MbN: Stop conference a MSELECTN Intercom Making an intercom call 1 MINTERCOMN. When 3 or more handsets are registered:

MbN: Select the desired unit. a MSELECTN If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd callers information is displayed on the handset that is in use after you hear the call waiting tone. 1 Press MCALL WAITN to answer the 2nd call. 2 To switch between calls, press MCALL WAITN. Note:

R Please contact your phone service provider for details and availability of this service in your area. Temporary tone dialing (for rotary/pulse service users) Press * (TONE) before entering access numbers which require tone dialing. Call share While you are on an outside call, another unit can join the conversation. Only 2 units can join an outside call. Note:

R To prevent other users from joining your conversations, turn call sharing mode off

(page 19). Transferring calls, conference calls 1 During an outside call, press MINTERCOMN. When 3 or more handsets are registered:

MbN: Select the desired unit. a MSELECTN 2 Wait for the paged party to answer. R If the paged party does not answer, N to return to the outside press M call. 3 To complete the transfer:

Press MOFFN. To establish a conference call:

MMENUN a MbN: Conf. a MSELECTN R To leave the conference, press MOFFN. For assistance, please visit http://shop.panasonic.com/support 13 TGC35x_36x(en)_1116_ver012.pdf 13 2015/11/16 9:16:36 Phonebook Phonebook You can add 50 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook. Adding phonebook entries or MFN a MMENUN 1 2 MbN: Add new entry a MSELECTN 3 Enter the partys name. a MOKN 4 Enter the partys phone number. a MOKN 5 MbN: Select the desired group. a MSELECTN 2 times a MOFFN Entering characters Press the dial key that corresponds to the desired character. Press repeatedly to scroll through the available characters. The following operations are also available. Key

Operation Switch between the uppercase and lowercase

(A a) MFN MEN Move the cursor MCLEARN Erase the character or number R To erase all, press and hold it. Storing a redial list number to the phonebook 1 MEN REDIAL 2 MbN: Select the desired entry. a MSAVEN 3 To store the name, continue from step 3, Editing entries, page 15. Storing caller information to the phonebook 1 MCN CID 2 MbN: Select the desired entry. R To edit the number: MMENUN a MbN:

Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the desired format. And then, press MSAVEN. Go to step 5. 3 MMENUN 4 MbN: Save CID a MSELECTN 5 MbN: Phonebook a MSELECTN 6 Continue from step 3, Editing entries, page 15. Groups You can assign your phone entries to groups for each searching. You can assign a ringtone to each group to help identify incoming calls

(Caller ID required). Changing group names/setting ringer ID or MFN 1 a MMENUN 2 MbN: Group a MSELECTN 3 MbN: Select the desired group. a MSELECTN 4 To change group names MbN: Group name a MSELECTN a Edit the name. a MSAVEN To set group ringer tone MbN: Select the current setting of the group ringer tone. a MSELECTN a MbN:

Select the desired ringer tone. a MSAVEN 5 MOFFN Finding and calling from a phonebook entry or MFN 1 2 MbN: Select the desired entry. 3 M N 14 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 14 2015/11/16 9:16:36 Phonebook Speed dial You can assign 1 phone number to each of the dial keys (1 to 9) on the handset. Adding phone numbers to speed dial keys n By entering phone numbers:

1 Press and hold the desired speed dial key (1 to 9). a MADDN 2 MbN: Manual a MSELECTN 3 Enter the partys name. a MOKN 4 Enter the partys phone number. a MOKN a MSELECTN a MOFFN n From the phonebook:

1 Press and hold the desired speed dial key (1 to 9). a MADDN 2 MbN: Phonebook a MSELECTN 3 MbN: Select the desired entry. a MSAVEN a MOFFN Note:

R If you edit a phonebook entry which is assigned to a speed dial key, the edited entry does not transfer to the speed dial key. Editing an entry 1 Press and hold the desired speed dial key

(1 to 9). a MMENUN 2 MbN: Edit a MSELECTN 3 Edit the name if necessary. a MOKN 4 Edit the phone number if necessary. a MOKN a MSELECTN a MOFFN Editing entries 1 Find the desired entry (page 14). 2 MMENUN a MbN: Edit a MSELECTN 3 Edit the name if necessary. a MOKN 4 Edit the phone number if necessary. a MOKN 5 MbN: Select the desired group (page 14). a MSELECTN 2 times a MOFFN Erasing an entry 1 Find the desired entry (page 14). 2 MMENUN a MbN: Erase a MSELECTN 3 MbN: Yes a MSELECTN a MOFFN Chain dial This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the phonebook, without having to dial manually. 1 During an outside call, press MMENUN. 2 MbN: Phonebook a MSELECTN 3 MbN: Select the desired entry. 4 Press MCALLN to dial the number. Note:

R When storing a calling card access number and your PIN in the phonebook as one phonebook entry, press MDN (Pause) to add pauses after the number and PIN as necessary (page 12). R If you have rotary/pulse service, you need to press * (TONE) before pressing MMENUN in step 1 to change the dialing mode temporarily to tone. When adding entries to the phonebook, we recommend adding * (TONE) to the beginning of phone numbers you wish to chain dial

(page 14). For assistance, please visit http://shop.panasonic.com/support 15 TGC35x_36x(en)_1116_ver012.pdf 15 2015/11/16 9:16:36 Phonebook Erasing an entry 1 Press and hold the desired speed dial key

(1 to 9). a MMENUN 2 MbN: Erase a MSELECTN 3 MbN: Yes a MSELECTN a MOFFN Making a call Press and hold the desired speed dial key (1 to 9). a M N 16 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 16 2015/11/16 9:16:36 Programming Menu list Scrolling through the display menus: MMENUN a Press MCN or MDN to select the desired main menu. a MSELECTN OR Using the direct command code: MMENUN a Enter the desired code. Example: Press MMENUN#101. R To exit the operation, press MOFFN. Display menu tree and direct command code table Main menu:

Phonebook Operation Viewing the phonebook entry. Main menu:

Caller list Operation Viewing the caller list. Code

#280 Page 14 Code

#213 Page 23 Main menu:

Answering device*1 Sub-menu 1 Sub-menu 2 Settings <Default> Code Page Play new msg. Play all msg. Erase all msg. Greeting Settings Answer on Answer off Record greeting Check greeting Pre-recorded Ring count Recording time Remote code Screen call Toll saver

<4 rings>

2-7 rings

<3 min>

1 min Greeting only*2

<111>

<On>

Off

#323

#324

#325

#302

#303

#304

#211 25 25 24 24 24 26

#305 27

#306

#310

#327

#328 25 26 For assistance, please visit http://shop.panasonic.com/support 17 TGC35x_36x(en)_1116_ver012.pdf 17 2015/11/16 9:16:36 Programming Main menu:

V.M. access (V.M.: Voicemail) Operation Listening to voicemail messages. Main menu:

Intercom Operation Paging the desired unit. Main menu:

Set date & time Code

#330 Page 28 Code

#274 Page 13 Sub-menu 1 Sub-menu 2 Settings <Default>

Code Page Date and time Alarm Time adjustment*3 Main menu:

Initial setting

#101

#720 10 20

<Off>

Once Daily

<Caller ID auto>

Manual

#226 Sub-menu 1 Sub-menu 2 Settings <Default>

Code Page Ringer setting Ringer volume Ringer tone*4 Silent mode On/Off Silent mode Start/End Off6 <6>

<Tone 1>

On

<Off>

<11:00 PM/06:00 AM>

Set date & time Date and time Alarm

<Off>

Once Daily Time adjustment*3

<Caller ID auto>

Manual Handset name Call block First ring Block w/o num*2 Speed dial

<On>

Off On

<Off>

#160

#161

#238

#237

#101

#720

#226

#104

#217

#173

#240

#261 12 20 20 10 20 21 20 21 21 15 18 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 18 2015/11/16 9:16:36 Sub-menu 2 Settings <Default>

Code Page Programming Store VM access#

Sub-menu 1 Voice mail LCD contrast Key tone Caller ID edit Auto talk VM tone detect Set tel line Set dial mode Set flash time Set line mode*5 Call sharing Registration Register handset Deregistration*2 Change language Display Voice prompt*1 Main menu:

Customer support Operation Displaying customer support Web address.

<On>

Off Level 14 <2>

<On>

Off

<On>

Off On

<Off>

<Tone>

Pulse 80 ms 90 ms 100 ms 110 ms 160 ms 200 ms 250 ms 300 ms 400 ms 600 ms

<700 ms>

900 ms A

<B>

<On>

Off

<English>

Espaol

<English>

Espaol

#331

#332

#145

#165

#214

#200

#120

#121

#122

#194

#130

#131

#110

#112 28 28 23 12 11 12 13 22 22 10 10 Code

#680 Page

*1 KX-TGC360 series

*2 This menu is not displayed when scrolling through the display menus. It is only available in direct command code. For assistance, please visit http://shop.panasonic.com/support 19 TGC35x_36x(en)_1116_ver012.pdf 19 2015/11/16 9:16:36 Programming

*3 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. To turn this feature on, select Caller ID auto. To turn this feature off, select Manual. (Caller ID subscribers only) To use this feature, set the date and time first (page 10).

*4 The preset melodies in this product (Tone 3 - Tone 5, Melody 1 - Melody 10) are used with permission of 2012 Copyrights Vision Inc.

*5 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to A if telephone line condition is not good. Alarm An alarm sounds at the set time for 3 minutes once or daily. Alarm can be set for each handset. 1 MMENUN#720 2 MbN: Select the desired alarm option. a MSELECTN 3 Enter the desired month and date. a MOKN 4 Set the desired time. 5 *: Select AM or PM. a MOKN 6 MbN: Select the desired alarm tone. a MSELECTN 7 MSELECTN a MOFFN Silent mode Silent mode allows you to select a period of time during which the handset will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each unit. Important:

R If you have set the alarm, the alarm sounds even if the silent mode is turned on. Turning silent mode on/off 1 MMENUN#238 2 MbN: Select the desired setting. a MSAVEN 3 Follow the directions on the display to complete the operation. Changing the start and end time 1 MMENUN#237 2 Follow the directions on the display to complete the operation. Call block This feature allows the unit to block calls when:

the unit receives a call from a phone number stored in the call block list as unwanted (Storing unwanted callers, page 21). the unit receives a call without phone number (Blocking incoming calls that have no phone number, page 21). When a call is received, the unit rings once*1 while caller information is being received. If the callers phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call. (Caller ID subscribers only)

*1 This is called first ring. If you do not want the first ring to sound, turn this setting to Off (page 21). Important:

R Blocked calls are logged in the caller list. 20 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 20 2015/11/16 9:16:36 Storing unwanted callers You can store up to 30 phone numbers in the call block list. Important:

R We recommend storing 10 digits (including the area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked. n From the caller list:

1 MCN CID 2 MbN: Select the entry to be blocked. R To edit the number: MMENUN a MbN:

Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the 10-digit format. And then, press MSAVEN. Go to step 5. 3 MMENUN 4 MbN: Save CID a MSELECTN 5 MbN: Call block a MSELECTN 6 MbN: Yes a MSELECTN 7 Edit the phone number if necessary (24 digits max.). 8 MSAVEN a MOFFN n By entering phone numbers:

1 MMENUN#217 2 MMENUN a MbN: Add a MSELECTN 3 Enter the phone number (24 digits max.). R To erase a digit, press MCLEARN. 4 MSAVEN a MOFFN Blocking incoming calls that have no phone number You can block calls when no phone number is provided, such as private callers or out of area calls. 1 MMENUN#240 2 MbN: Select the desired setting. a MSAVEN a MOFFN Programming Turning the first ring on and off You can choose whether the first ring sounds when a call is received. On (default): The first ring for all calls will be heard, including calls from blocked phone numbers. Off: The first ring is muted for all calls. If this setting is selected, the unit will never ring for calls from blocked phone numbers. 1 MMENUN#173 2 MbN: Select the desired setting. a MSAVEN a MOFFN Viewing/editing/erasing call block numbers 1 MMENUN#217 2 MbN: Select the desired entry. 3 To edit a number:

MEDITN a Edit the phone number. a MSAVEN a MOFFN To erase a number:

MERASEN a MbN: Yes a MSELECTN a MOFFN Note:

R When viewing, Block w/o num is displayed if the blocking incoming calls without phone number feature is turned on. To turn the feature off: MERASEN a MCN a MSAVEN a MOFFN Other programming Changing the handset name 1 MMENUN#104 2 Enter the desired name. 3 MSAVEN 4 MbN: Select the desired setting. a MSELECTN 2 times a MOFFN For assistance, please visit http://shop.panasonic.com/support 21 TGC35x_36x(en)_1116_ver012.pdf 21 2015/11/16 9:16:36 Programming Registering a handset to the base unit If for some reason the handset is not registered to the base unit, re-register the handset. 1 Handset:

MMENUN#130 2 Base unit:

Press and hold M N for about 5 seconds. R If all registered handsets start ringing, N again to stop, then repeat press M this step. 3 Handset:

Press MOKN, then wait until a long beep sounds. Deregistering a handset 1 MMENUN#131 R All handsets registered to the base unit are displayed. 2 MbN: Select the handset you want to cancel. a MSELECTN 3 MbN: Yes a MSELECTN a MOFFN 22 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 22 2015/11/16 9:16:36 Caller ID Service 5 M N Auto edit feature After you edit and call back a phone number in the caller list, the unit remembers the way you edited the phone number and edits subsequent calls from the same area code in the same way. Note:

R This feature can be set for each unit

(page 19). Erasing selected caller information 1 MCN CID 2 MbN: Select the desired entry. 3 MERASEN a MbN: Yes a MSELECTN a MOFFN Using Caller ID service Important:

R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Caller ID features When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest. R If the unit cannot receive caller information, the following is displayed:

Out of area: The caller dials from an area which does not provide a Caller ID service. Private caller: The caller requests not to send caller information. Long distance: The caller makes a long distance call. R If the unit is connected to a PBX system, caller information may not be properly received. Contact your PBX supplier. Caller list Viewing the caller list and calling back 1 MCN CID 2 Press MCN to search from the most recent call, or MDN to search from the oldest call. 3 To call back, press M N. Editing a callers phone number 1 MCN CID 2 MbN: Select the desired entry. 3 MMENUN a MbN: Edit a MSELECTN 4 Press MEDITN repeatedly until the phone number is shown in the desired format. For assistance, please visit http://shop.panasonic.com/support 23 TGC35x_36x(en)_1116_ver012.pdf 23 2015/11/16 9:16:36 Answering System Answering system

(KX-TGC360 series) The answering system can answer calls and record caller messages. If you do not want to record messages, select Greeting only as the recording time setting (page 27). Recording capacity The total recording time is about 17 minutes, including your greeting message. Up to 64 messages can be recorded. Note:

R When message memory becomes full:

Messages full is shown on the handset display. The ANSWER ON/OFF indicator on the base unit flashes rapidly if the answering system is turned on. Turning the answering system on/off Base unit Press MANSWER ON/OFFN to turn on/off the answering system. Using a pre-recorded greeting message Select Greeting only in step 2 of Callers recording time, page 27. Resetting to a pre-recorded greeting message 1 MMENUN#304 2 MYESN a MOFFN Playing back the greeting message 1 MMENUN#303 2 To exit, press MOFFN. Listening to messages Using the base unit When new messages have been recorded, message indicator on the base unit flashes. Press M R New messages will be played. If there are no new messages, old messages will be played. N (PLAY). Greeting message Operating the answering system during playback Recording your greeting message Key 1 MMENUN#302 2 MbN: Yes a MSELECTN 3 After a beep sounds, hold the handset away and speak clearly into the microphone. MjN or MkN N N M M M Operation Adjust the speaker volume Repeat message Skip message N (STOP) Stop playback 4 Press MSTOPN to stop recording.a MOFFN MERASEN Erase currently playing message 24 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 24 2015/11/16 9:16:36 Answering System Calling back (Caller ID subscribers only) 1 Press MPAUSEN during playback. 2 MbN: Call back a MSELECTN Remote operation You can use a touch-tone phone to call the unit while away from home and listen to messages. Remote access code For security, a 3-digit remote access code must be entered when operating the answering system remotely. The default setting is 111. Important:

R To prevent unauthorized access to this product, we recommend that you regularly change the remote code. 1 MMENUN#306 2 Enter the desired 3-digit remote access code. R To deactivate remote operation, press

*. 3 MSAVEN a MOFFN Using the answering system remotely 1 Dial your phone number from a touch-tone phone. 2 After the greeting message starts, enter your remote access code. 3 Follow the voice guidance prompts as necessary or control the unit using remote commands (page 26). 4 When finished, hang up. Erasing all messages Press MERASEN 2 times while the unit is not in use. Using the handset When new messages have been recorded, New message is displayed. 1 To listen to new messages:

MMENUN#323 To listen to all messages:

MMENUN#324 2 When finished, press MOFFN. Operating the answering system MMENUN a MbN: Answering device a MSELECTN Key Operation MDN or MCN 1 or MFN 2 or MEN 3 4 5 6 76 8 Adjust the receiver/speaker volume (during playback) Repeat message (during playback) Skip message (during playback) Enter the Settings menu Play new messages Play all messages Play greeting message Record greeting message Turn answering system on MPAUSEN Pause message*1 9 or MSTOPN Stop recording Stop playback 0

*4

*5

*6 Turn answering system off Erase currently playing message Erase all messages Reset to a pre-recorded greeting message

*1 To resume playback:

MbN: Playback a MSELECTN For assistance, please visit http://shop.panasonic.com/support 25 TGC35x_36x(en)_1116_ver012.pdf 25 2015/11/16 9:16:36 Answering System Voice guidance n When the English voice guidance is Turning on the answering system remotely selected During remote operation, the units voice guidance starts and prompts you to press 1 to perform a specific operation, or press 2 to listen to more available operations. n When the Spanish voice guidance is selected To start the voice guidance, press 9. The voice guidance announces the available remote commands (page 26). Note:

R If you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call. Remote commands Key Operation 1 2 4 5 9 0 Repeat message (during playback) Skip message (during playback) Play new messages Play all messages Stop playback*1 Start voice guidance*2 Turn answering system off

*4 Erase currently playing message

*5 Erase all messages

*# End remote operation

(or hang up)

*1 For English voice guidance only

*2 For Spanish voice guidance only 1 Dial your phone number from a touch-tone phone. 2 Let the phone ring 15 times. R A long beep is heard. 3 Enter your remote access code within 10 seconds after the long beep. R The greeting message is played back. R You can either hang up, or enter your remote access code again and begin remote operation (page 25). Answering system settings Call screening While a caller is leaving a message, you can listen to the call through the handsets speaker. 1 MMENUN#310 2 MbN: Select the desired setting. a MSAVEN a MOFFN Number of rings before the unit answers a call You can change the number of times the phone rings Ring count before the unit answers calls. You can select 2 to 7 rings, or Toll saver. The default setting is 4 rings. Toll saver: The units answering system answers at the end of the 2nd ring when new messages have been recorded, or at the end of the 5th ring when there are no new messages. 1 MMENUN#211 2 MbN: Select the desired setting. a MSAVEN a MOFFN 26 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 26 2015/11/16 9:16:36 Answering System Callers recording time You can change the maximum message recording time allowed for each caller. 1 MMENUN#305 2 MbN: Select the desired setting. a MSAVEN a MOFFN Selecting Greeting only You can select Greeting only which sets the unit to announce a greeting message to callers but not record messages. Select Greeting only in step 2 on Callers recording time, page 27. For assistance, please visit http://shop.panasonic.com/support 27 TGC35x_36x(en)_1116_ver012.pdf 27 2015/11/16 9:16:36 Useful Information Voicemail service In addition to your units answering system you may also have voicemail service from your phone service provider. Voicemail is an answering service that may be offered by your phone service provider. This service can also record calls when you are unavailable to answer the phone or when your line is busy. Messages are recorded on the phone company system and not on the units answering system. R To use the voicemail service rather than the units answering system, turn off the answering system (page 24). If you have units answering system set to on and also the voicemail enabled, the system with least amount of rings will record the message first. Example:

If the units answering system is set to 4 rings

(page 26) and the voicemail answering system provided by your phone company is set to 6 rings (call your service provider), the units answering system will record the incoming call first. Storing the voicemail (VM) access number You can store the phone number used to access your voicemail service. 1 MMENUN#331 2 Enter your access number. a MSAVEN a MOFFN Note:

R When storing your voicemail access number and your mailbox password, press MDN (Pause) to add pauses (page 12) between the access number and the password as necessary. Contact your phone service provider for the required pause time. Example:

To erase the voicemail access number 1 MMENUN#331 2 Press and hold MCLEARN until all digits are erased. a MSAVEN a MOFFN Voicemail (VM) tone detection Your voicemail service provider sends special signals to the unit to let you know that you have new voicemail messages. If you hear a series of dial tones followed by a continuous dial tone after you press M voicemail messages. The unit can detect these signals automatically. Turn this feature off in the following situations. You do not subscribe to voicemail service. Your phone is connected to a PBX. N, you have new Turning VM tone detection on/off 1 MMENUN#332 2 MbN: Select the desired setting. a MSAVEN a MOFFN Listening to voicemail messages 1 MMENUN#330 R The speakerphone turns on. 2 Follow the pre-recorded instructions. 3 When finished, press MOFFN. Note:

R You can also use the MVMN soft key, if displayed, to play new voicemail messages. R If the handset still indicate there are new messages even after you have listened to all new messages, turn it off by pressing and holding # until the handset beeps. 28 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 28 2015/11/16 9:16:36 1-222-333-4444VM access numberPausesPasswordPPPP8888 Useful Information Error messages Display message Cause/solution Base no power or No link. Re-connect base AC adaptor. R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handsets registration may have been canceled. Re-register the handset (page 22). Busy R Other units are in use and the system is busy. Try Call phone company for your access #

Check tel line Error!!

Invalid again later. R You have not stored the voicemail access number. Store the number (page 28). R The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 8). R Recording was too short. Try again. R There is no handset registered to the base unit matching the handset number you entered. R The handset is not registered to the base unit. Register the handset (page 22). Use rechargeable battery. R A wrong type of battery such as alkaline or manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 4, 6. Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base units AC adaptor, then reconnect the base units AC adaptor. Remove the batteries from the handset, and then insert the batteries into the handset again. General use Problem The handset does not turn on even after installing charged batteries. The unit does not work. Cause/solution R Place the handset on the base unit or charger to turn on the handset. R Make sure the batteries are installed correctly (page 8). R Fully charge the batteries (page 8). R Check the connections (page 8). R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset has not been registered to the base unit. Register the handset (page 22). For assistance, please visit http://shop.panasonic.com/support 29 TGC35x_36x(en)_1116_ver012.pdf 29 2015/11/16 9:16:36 Useful Information Problem Cause/solution I cannot hear a dial tone. R The base units AC adaptor or telephone line cord is not connected. Check the connections. Time on the unit has shifted. R Incorrect time information from incoming Caller ID changes the time. Set the time adjustment to Manual

(off) (page 18). Battery recharge Problem Cause/solution I fully charged the batteries, but the operating time seems to still flashes, is displayed, or be shorter. R Clean the battery ends (

) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 8). Making/answering calls, intercom Problem is displayed. Noise is heard, sound cuts in and out. Cause/solution R The handset is too far from the base unit. Move closer. R The base units AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The handset is not registered to the base unit. Register it

(page 22). R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. The handset does not ring. R The ringer volume is turned off. Adjust the ringer volume

(page 12, 18). R Silent mode is turned on. Turn it off (page 20). I cannot make a call. R The dialing mode may be set incorrectly. Change the setting (page 11). 30 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 30 2015/11/16 9:16:36 Caller ID Problem Caller information is not displayed. Useful Information Cause/solution R You must subscribe to Caller ID service. Contact your phone service provider for details. R If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone line jack, plug the unit directly into the wall jack. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The name display service may not be available in some areas. Contact your phone service provider for details. Caller information is displayed late. R Depending on your phone service provider, the unit may display the callers information at the 2nd ring or later. Answering system Problem Cause/solution The unit does not record new messages. R The answering system is turned off. Turn it on (page 24). R The message memory is full. Erase unnecessary messages (page 24). R The recording time is set to Greeting only. Change the setting (page 27). R Your phone service providers voicemail service may be answering your calls before the units answering system can answer your calls. Change the units number of rings setting (page 26) to a lower value, or contact your phone service provider. Voicemail Problem New Voice Mail is shown on the handset display. How do I remove this message from the display?

Cause/solution R Listen your new voicemail messages (page 28). Depending on your voicemail service provider, you may need to erase all messages in your voice mailbox in order to remove this message. R You can remove this message manually by pressing and holding # until the unit beeps. For assistance, please visit http://shop.panasonic.com/support 31 TGC35x_36x(en)_1116_ver012.pdf 31 2015/11/16 9:16:36 Useful Information Liquid damage Problem Cause/solution Liquid or other form of moisture has entered the handset/base unit. R Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center. Caution:

R To avoid permanent damage, do not use a microwave oven to speed up the drying process. Wall mounting (Charger only) Note:

R Make sure that the wall and the fixing method are strong enough to support the weight of the unit. Drive the screws (

) (not supplied) into the wall. 27.2 mm (1 1/16 inches) 32 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 32 2015/11/16 9:16:36 1212 FCC and other information Useful Information For assistance, please visit http://shop.panasonic.com/support 33 TGC35x_36x(en)_1116_ver012.pdf 33 2015/11/16 9:16:36 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------.If requested, this number must be provided to the telephone company.L Registration No: KX-TGC350 series: found the rear of the unit KX-TGC360 series: found the bottom of the unitL Ringer Equivalence No. (REN).......0.1BA plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with the product. It is designed to be connected to a compatible modular jack that is also compliant.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for the product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Service Center or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset Useful Information 34 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 34 2015/11/16 9:16:36 accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices.WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS:1) Remain on the line and briefly explain to the dispatcher the reason for the call.2) Perform such activities in the off-peak hours, such as early morning or late evenings.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Privacy of communications may not be ensured when using this phone.CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, move the cordless telephone further away from the TV or VCR. This will often reduce or eliminate interference. FCC RF Exposure Warning:L This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. L To comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the product and all persons body. L This product may not be collocated or operated in conjunction with any other antenna or transmitter. L For body-worn operation, the handset must be used only with a non-metallic accessory. Use of other accessories may not ensure compliance with FCC RF exposure requirements.Notice:L FCC ID can be found inside the battery compartment or on the bottom of the units. Useful Information For assistance, please visit http://shop.panasonic.com/support 35 TGC35x_36x(en)_1116_ver012.pdf 35 2015/11/16 9:16:36 Compliance with TIA-1083 standard:Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants.TCompatible withHearing Aid T-CoilTIA-1083 Gua Rpida Espaola Gua Rpida Espaola 36 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) TGC35x_36x(en)_1116_ver012.pdf 36 2015/11/16 9:16:36 ConexionesInstalacin y carga de la bateraCargue aproximadamente durante 7 horas.Nota:LUTILICE SOLO bateras recargables de Ni-MH tamao AAA (R03) ().LNO utilice bateras alcalinas, de manganeso o de Ni-Cd.LConfirme que las polaridades estn correctas (S, T).LCambie el idioma de la pantalla.1344521 Conecte el adaptador de corriente alterna a la unidad presionndolo firmemente.2 Enganche el cable para fijarlo.3 Conecte el adaptador de corriente alterna a la toma de corriente.4 Conecte el cable de la lnea telefnica a la unidad, y despus a la toma telefnica de una sola lnea (RJ11C) hasta que escuche un clic.5 Se requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.11 Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 37 TGC35x_36x(en)_1116_ver012.pdf 37 2015/11/16 9:16:37 Sugerencias de operacinTeclas de funcinAl oprimir una tecla de funcin, puede seleccionar la funcin que aparece directamente encima de ella en la pantalla. Preste atencin a la pantalla para ver qu funciones estn asignadas a las teclas de funcin durante la operacin.Tecla navegadora{^}, {V}, {<} o {>}: Navegue por diversas listas y elementos.VOL. (Volumen: {^} o {V}): Ajuste el volumen del receptor o el altavoz mientras habla.{<} k: Vea la entrada del directorio telefnico.{V} CID (identificador de llamadas): Vea la lista de personas que llamaron.{>} REDIAL (Remarcacin): Vea la lista de remarcacin.Cambio de idiomas (Auricular) (predeterminado: English)Cuando instale las bateras por primera vez, es posible que aparezca Date and time Press SELECT. Oprima {OFF} para salir.Idioma de la pantalla{MENU} (11) s {r}: Espaol s {GUARDA} s {OFF} Idioma de la gua de vozDisponible para: serie KX-TGC360{MENU} (112 s {r}: Espaol s {GUARDA} s {OFF}Fecha y hora (Auricular)1{MENU} (1)12Introduzca el da, mes y ao actuales. s {OK}3Introduzca la hora y minuto actuales (formato de reloj de 24 horas).4{GUARDA} s {OFF}{V}{^}{<}{>} Gua Rpida Espaola 38 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) TGC35x_36x(en)_1116_ver012.pdf 38 2015/11/16 9:16:37 Operaciones bsicasCmo hacer y contestar llamadas (Auricular)Para hacer llamadasMarque el nmero telefnico. s {C}/{s}Para contestar llamadas{C}/{s}Para colgar{OFF}Para ajustar el volumen del receptor o del altavozOprima {^} o {V} repetidamente mientras habla.Cmo hacer una llamada usando la lista de remarcacin{>} REDIAL s {r}: Seleccione la entrada deseada. s {C}Para ajustar el volumen del timbre del auricularOprima {^} o {V} repetidamente mientras timbra.Directorio telefnico (Auricular)Para aadir entradas1{k} o {<} k s {MENU}2{r}: Agregar Ent. Nueva s {SELEC.}3Introduzca el nombre de la persona (mx. 16 caracteres). s {OK}4Introduzca el nmero telefnico de la persona (mx. 24 dgitos). s {OK}5{r}: Seleccione el grupo deseado. s {SELEC.} 2 veces s {OFF}Para hacer llamadas1{k} o {<} k2{r}: Seleccione la entrada deseada. s {C}Sistema contestador de llamadas (unidad base: serie KX-TGC360)Contestador encendido/apagadoOprima {ANSWER ON/OFF} para encender y apagar el contestador de llamadas.Para escuchar mensajes{P} (PLAY)Sistema contestador de llamadas (auricular: serie KX-TGC360)Para escuchar mensajesPara escuchar mensajes nuevos:{REPRO.} o {MENU} (323Para escuchar todos los mensajes:{MENU} (324 Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 39 TGC35x_36x(en)_1116_ver012.pdf 39 2015/11/16 9:16:37 Preguntas frecuentesPreguntaCausa y solucinPor qu aparece _?LEl auricular est demasiado lejos de la unidad base. Acrquelo.LEl adaptador para corriente de la unidad base no est conectado correctamente. Conecte de nuevo el adaptador para corriente a la unidad base.LEl auricular no est registrado en la unidad base. Regstrelo.1Auricular: {MENU} (13)2Unidad base: Oprima y mantenga oprimido {x} durante aproximadamente 5 segundos.3Auricular: Oprima {OK}, y despus espere hasta que suene un pitido largo. Cmo se incrementa el nivel de volumen del auricular?LOprima la tecla de navegacin {^} repetidamente mientras habla.Por qu hay ruido o se corta la conversacin?LTrate de reubicar la unidad base de forma que se minimice la distancia al auricular.LSi ocurre el mismo problema aunque el auricular se encuentre enseguida de la unidad base, visite http://shop.panasonic.com/supportEs posible aadir otro auricular accesorio a mi unidad base?LS, puede aadir hasta 6 auriculares (incluyendo los que se venden con su unidad base) a una sola unidad base.LPara adquirir auriculares accesorios adicionales (KX-TGDA20), visite: http://shop.panasonic.com/support Los usuarios TTY (usuarios con impedimentos auditivos o del habla) pueden llamar al 1-877-833-8855.Es posible mantener cargando las bateras todo el tiempo?LPuede dejar el auricular en la unidad base o el cargador en cualquier momento. Esto no daa las bateras.Cmo se contestan las llamadas en espera (2a llamada)?LOprima {CALL WAIT} cuando escuche el tono de llamada en espera. Appendix Customer services 40 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 40 2015/11/16 9:16:37 Accessories!hp://shop.panasonic.com/supportCustomer Services DirectoryShopfor all your Panasonic gearGo to Get everything you need to get the most out ofyour Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & moreFor Product Informa!on, Opera!ng Assistance, Parts, Owners Manuals, Dealer and Service infogo to hp://shop.panasonic.com/supportFor the hearing or speech impaired TTY: 1- 877-833-8855 As of June 2015 Limited Warranty (ONLY FOR U.S.A.) Appendix For assistance, please visit http://shop.panasonic.com/support 41 TGC35x_36x(en)_1116_ver012.pdf 41 2015/11/16 9:16:37 Limited Warranty Coverage (For USA Only)LaborOne (1) YearPartsOne (1) YearTo submit a new repair request and for quick repair status visit our Web Site athttp://shop.panasonic.com/supportPanasonic Products Limited WarrantyOnline Repair RequestMail-In Service--Online Repair RequestIf your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts,(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.During the Labor warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States.This warranty is extended only to the original purchaser of a new product which was not sold as is.TelephoneWhen shipping the unit, carefully pack, include all supplied accessories listed in the Owners Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.com/support as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.Product or Part Name Appendix 42 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 42 2015/11/16 9:16:37 Limited Warranty Limits and Exclusions(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE.THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to: Consumer Affairs Department Panasonic Corporation of North America 661 Independence Pkwy Chesapeake, VA 23320As of June 2015 Index I Intercom: 13 K Key tone: 19 L M Making calls: 12 Line mode: 19 P Mute: 12 Pause: 12 Phonebook: 14 T S R Redialing: 12 Ringer ID: 14 Ringer tone: 18 Rotary/pulse service: 13 Silent mode: 20 Speed dial: 15 SP-PHONE (Speakerphone): 12 Temporary tone dialing: 13 Time adjustment: 18 Transferring calls: 13 Troubleshooting: 29 TTY: 40 VM (Voicemail): 28 Voice guidance language: 10 Voicemail: 28 Volume V Receiver: 12 Ringer (Base unit): 12 Ringer (Handset): 12, 18 Speaker: 12 W Wall mounting: 32 Index A Additional handset: 4 Alarm: 20 Answering calls: 12 Answering system Call screening: 26 Erasing messages: 24, 25, 26 Greeting message: 24 Greeting only: 27 Listening to messages: 24, 25 Number of rings: 26 Recording time: 27 Remote access code: 25 Remote operation: 25 Ring count: 26 Toll saver: 26 Turning on/off: 24 Auto talk: 12, 19 B Battery: 8 Booster (Clarity booster): 10 C Call block: 20 First ring: 21 Call share: 13, 19 Call waiting: 12 Call Waiting Caller ID: 12 Caller ID number auto edit: 19, 23 Caller ID service: 23 Caller list: 23 Caller list edit: 23 Chain dial: 15 CID (Caller ID): 23 Conference calls: 13 Customer support: 19 D Date and time: 10 Dialing mode: 11 Direct command code: 17 Display Contrast: 19 Language: 10 E Eco mode: 9 Error messages: 29 Flash: 12, 19 F G Groups: 14 H Handset Deregistration: 22 Name: 21 Registration: 22 Hold: 12 TGC35x_36x(en)_1116_ver012.pdf 43 2015/11/16 9:16:37 43 For your future reference We recommend keeping a record of the following information to assist with any repair under warranty. Serial No. Date of purchase

(found on the bottom of the base unit) Name and address of dealer Attach your purchase receipt here. Panasonic Corporation 2015 Printed in Malaysia

*PNQX7789YA*

*PNQX7789YA*

PNQX7789YA PT1215MU1027 TGC35x36x(en)_0120_ver101.pdf 44 2017/01/20 19:00:09 1 Reconnect AC adaptor to the base unit.2 Check if telephone line cord is connected.3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)4 Read troubleshooting page in the Operating Instructions.Visit our Web site: http://shop.panasonic.com/supportLFAQ and troubleshooting hints are available.If your product is not working properly. IMPORTANT!Two Riverfront Plaza, Newark, NJ 07102-5490