FCC ID: ACJ9TGWL13A Wireless Network Adapter

by: Panasonic Corporation of North America latest update: 2016-05-26 model: 9TGWL13A

Twenty Three grants have been issued under this FCC ID from 09/11/2013 to 05/26/2016 (this is one of ninety-six releases in 2016 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked password defaults, drivers, instructions, troubleshooting guides, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various User manual 1 of 2 Users Manual pdf 81.51 KiB November 06 2014
various User manual 2 of 2 Users Manual pdf 1.73 MiB November 06 2014
various User Manual rev1 Users Manual pdf 1.39 MiB December 01 2016
various Users Manual Users Manual pdf 4.23 MiB
various WLAN and BT Operating Instruction Users Manual pdf 352.13 KiB December 01 2016
various manual Users Manual pdf 1000.23 KiB / January 12 2013
various Host Internal photos V1.0 Internal Photos pdf 138.65 KiB December 01 2016
various Internal Photographs Internal Photos pdf 254.01 KiB May 02 2014 / April 08 2014
various Internal Photos Internal Photos pdf 1.16 MiB
various External Photographs External Photos pdf 321.11 KiB May 02 2014 / April 08 2014
various External Photos External Photos pdf 243.62 KiB
various External photos 2 of 3 External Photos pdf 321.75 KiB November 06 2014
various External photos 3 of 3 External Photos pdf 102.48 KiB November 06 2014
various Host External photos V1.0 External Photos pdf 157.41 KiB December 01 2016
various Module External Photographs External Photos pdf 159.49 KiB May 02 2014 / April 08 2014
various WLAN Module Extenal photos External Photos pdf 110.95 KiB December 01 2016
various FCC ID Label and Location ID Label/Location Info pdf 144.40 KiB
various Host ID Label location Info ID Label/Location Info pdf 25.78 KiB December 01 2016
various Label ID Label/Location Info pdf 145.36 KiB May 02 2014
various Label and Position ID Label/Location Info pdf 196.06 KiB May 02 2014
various Label location on host ID Label/Location Info pdf 22.89 KiB November 06 2014
various Label ID Label/Location Info pdf 79.40 KiB December 01 2016
various Cover Letters 20160517 v1 - Agent Authorization letter (C2PC for ) Cover Letter(s) pdf 27.64 KiB
various Cover Letters 20160517 v1 - C2PC letter (C2PC for ) Cover Letter(s) pdf 81.27 KiB
various Cover Letters 20160517 v1 - Request for Confidentiality letter (C2PC for Cover Letter(s) pdf 28.69 KiB
various Test Report pdf
various Test Report pdf
various Test Setup Photos pdf / October 07 2016
various Test Report pdf
various Test Report pdf
various Test Setup Photos pdf / October 07 2016
various Test Report pdf
various Test Setup Photos pdf
various Cover Letters 20160406 v1 - Agent Authorization letter (C2PC for ) Cover Letter(s) pdf 27.75 KiB October 05 2016
various Cover Letters 20160426 v1- C2PC letter (C2PC for ) Cover Letter(s) pdf 23.74 KiB October 05 2016
various Test Report pdf October 05 2016
various Test Setup Photos pdf October 05 2016
various RF Exposure Info pdf December 01 2016
various RF Exposure Info pdf December 01 2016
various RF Exposure Info pdf December 01 2016
various RF Exposure Info pdf December 01 2016
various RF Exposure Info pdf December 01 2016
various RF Exposure Info pdf December 01 2016
various RF Exposure Info pdf December 01 2016
various RF Exposure Info pdf December 01 2016
various RF Exposure Info pdf December 01 2016
various RF Exposure Info pdf December 01 2016
various RF Exposure Info pdf December 01 2016
various RF Exposure Info pdf December 01 2016
various Agent Authorization letter (C2PC for ) Cover Letter(s) pdf 25.88 KiB December 01 2016
various Attestation letter (C2PC for ) Cover Letter(s) pdf 22.30 KiB December 01 2016
various C2PC letter (C2PC for ) Cover Letter(s) pdf 43.10 KiB December 01 2016
various Confidentiality request letter (C2PC for ) Cover Letter(s) pdf 23.21 KiB December 01 2016
various Test Setup Photos pdf December 01 2016
various RF Exposure Info pdf December 01 2016
various Authorization Letter Attestation Statements pdf 50.90 KiB
various Class II Cover Letter Cover Letter(s) pdf 47.75 KiB
various Confidentiality Request Letter Cover Letter(s) pdf 51.88 KiB
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Agent authorization Cover Letter(s) pdf 23.42 KiB November 06 2014
various C2PC letter Cover Letter(s) pdf 24.29 KiB November 06 2014
various EMC justification letter Attestation Statements pdf 19.98 KiB November 06 2014
various RF Exposure Info pdf November 06 2014
various RF Exposure Info pdf November 06 2014
various RF Exposure Info pdf November 06 2014
various RF Exposure Info pdf November 06 2014
various RF Exposure Info pdf November 06 2014
various RF Exposure Info pdf November 06 2014
various RF Exposure Info pdf November 06 2014
various RF Exposure Info pdf November 06 2014
various Request for confidentiality Cover Letter(s) pdf 24.46 KiB November 06 2014
various RF Exposure Info pdf November 06 2014
various RF Exposure Info pdf November 06 2014
various Modular Approval Letter Cover Letter(s) pdf 40.59 KiB May 02 2014
various RF Exposure Info pdf May 02 2014
various Test Setup Photos pdf May 02 2014 / April 08 2014
various Agent Authorization letter Cover Letter(s) pdf 22.03 KiB
various C2PC request letter Cover Letter(s) pdf 23.74 KiB
various Confidentility letter Cover Letter(s) pdf 24.63 KiB
various RF Exposure Info pdf
various Test Setup Photos pdf / January 12 2013
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Authorization from Intel Cover Letter(s) pdf 22.42 KiB October 09 2013 / November 09 2013
various Request for change in ID Cover Letter(s) pdf 23.45 KiB October 09 2013 / November 09 2013
various Request for confidential Cover Letter(s) pdf 23.88 KiB October 09 2013 / November 09 2013
various User manual 1 of 2 Users Manual pdf 81.51 KiB November 06 2014
various User manual 2 of 2 Users Manual pdf 1.73 MiB November 06 2014
various User Manual rev1 Users Manual pdf 1.39 MiB December 01 2016
various Users Manual Users Manual pdf 4.23 MiB
various WLAN and BT Operating Instruction Users Manual pdf 352.13 KiB December 01 2016
various manual Users Manual pdf 1000.23 KiB / January 12 2013
various Host Internal photos V1.0 Internal Photos pdf 138.65 KiB December 01 2016
various Internal Photographs Internal Photos pdf 254.01 KiB May 02 2014 / April 08 2014
various Internal Photos Internal Photos pdf 1.16 MiB
various External Photographs External Photos pdf 321.11 KiB May 02 2014 / April 08 2014
various External Photos External Photos pdf 243.62 KiB
various External photos 2 of 3 External Photos pdf 321.75 KiB November 06 2014
various External photos 3 of 3 External Photos pdf 102.48 KiB November 06 2014
various Host External photos V1.0 External Photos pdf 157.41 KiB December 01 2016
various Module External Photographs External Photos pdf 159.49 KiB May 02 2014 / April 08 2014
various WLAN Module Extenal photos External Photos pdf 110.95 KiB December 01 2016
various FCC ID Label and Location ID Label/Location Info pdf 144.40 KiB
various Host ID Label location Info ID Label/Location Info pdf 25.78 KiB December 01 2016
various Label ID Label/Location Info pdf 145.36 KiB May 02 2014
various Label and Position ID Label/Location Info pdf 196.06 KiB May 02 2014
various Label location on host ID Label/Location Info pdf 22.89 KiB November 06 2014
various Label ID Label/Location Info pdf 79.40 KiB December 01 2016
various Cover Letters 20160517 v1 - C2PC letter (C2PC for ) Cover Letter(s) pdf 81.27 KiB
various Cover Letters 20160406 v1 - Agent Authorization letter (C2PC for ) Cover Letter(s) pdf 27.75 KiB October 05 2016
various Cover Letters 20160426 v1- C2PC letter (C2PC for ) Cover Letter(s) pdf 23.74 KiB October 05 2016
various Agent Authorization letter (C2PC for ) Cover Letter(s) pdf 25.88 KiB December 01 2016
various Attestation letter (C2PC for ) Cover Letter(s) pdf 22.30 KiB December 01 2016
various C2PC letter (C2PC for ) Cover Letter(s) pdf 43.10 KiB December 01 2016
various Confidentiality request letter (C2PC for ) Cover Letter(s) pdf 23.21 KiB December 01 2016
various Authorization Letter Attestation Statements pdf 50.90 KiB
various Class II Cover Letter Cover Letter(s) pdf 47.75 KiB
various Confidentiality Request Letter Cover Letter(s) pdf 51.88 KiB
various Agent authorization Cover Letter(s) pdf 23.42 KiB November 06 2014
various C2PC letter Cover Letter(s) pdf 24.29 KiB November 06 2014
various EMC justification letter Attestation Statements pdf 19.98 KiB November 06 2014
various Request for confidentiality Cover Letter(s) pdf 24.46 KiB November 06 2014
various Modular Approval Letter Cover Letter(s) pdf 40.59 KiB May 02 2014
various Agent Authorization letter Cover Letter(s) pdf 22.03 KiB
various C2PC request letter Cover Letter(s) pdf 23.74 KiB
various Confidentility letter Cover Letter(s) pdf 24.63 KiB
various Authorization from Intel Cover Letter(s) pdf 22.42 KiB October 09 2013 / November 09 2013
various Request for change in ID Cover Letter(s) pdf 23.45 KiB October 09 2013 / November 09 2013
various Request for confidential Cover Letter(s) pdf 23.88 KiB October 09 2013 / November 09 2013

frequency equipment class purpose
1 2016-05-26 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
2 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
3 2016-05-24 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
4 2016-05-10 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
5 2016-01-13 5755 ~ 5795 DTS - Digital Transmission System
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
7 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
8 2015-04-16 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
10 2422 ~ 2452 DTS - Digital Transmission System
11 2014-06-11 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 5755 ~ 5795 DTS - Digital Transmission System
14 2014-02-05 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
16 5755 ~ 5795 DTS - Digital Transmission System
17 2013-10-17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
18 5755 ~ 5795 DTS - Digital Transmission System
19 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
20 2013-09-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Change in identification of presently authorized equipment. Original FCC ID: PD97260NG Grant Date: 04/17/2013
21 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
22 JBP - Part 15 Class B Computing Device Peripheral
23 5755 ~ 5795 DTS - Digital Transmission System

Application Forms

app s Applicant Information
various Effective 2016-05-26
various 2016-05-24
various 2016-05-10
various 2016-01-13
various 2015-04-16
various 2014-06-11
various 2014-02-05
various 2013-10-17
various 2013-09-11
various Applicant's complete, legal business name Panasonic Corporation of North America
various FCC Registration Number (FRN) 0003762242
various Physical Address Two Riverfront Plaza, 9th Floor
various Newark, 07102-5490
various United States
app s TCB Information
various TCB Application Email Address c******@ccsemc.com
various L******@ul.com
various t******@pctestlab.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code ACJ
various Equipment Product Code 9TGWL13A
app s Person at the applicant's address to receive grant or for contact
various Name B**** B****
various Title Project Manager
various Telephone Number 201-3********
various Fax Number 201-3********
various E-mail B******@us.panasonic.com
app s Technical Contact
various Firm Name UL Japan, Inc.
various UL Verification Services, Inc.
various PCTEST Engineering Laboratory, Inc.
various Name T****** H****
various R******** O******
various Physical Address 4383-326 Asama-cho, Ise-shi
various 6660-B Dobbin Road
various Mie-ken, 516-0021
various Columbia, Maryland 21045
various Japan
various United States
various Telephone Number 81-59********
various 410-2********
various Fax Number 81-59********
various 410-2********
various E-mail T******@ul.com
various t******@pctestlab.com
app s Non Technical Contact
various Firm Name UL Japan, Inc.
various UL Verification Services, Inc.
various Name T******** H****
various T**** H****
various Physical Address 4383-326 Asama-cho, Ise-shi
various 47173 Benicia Street
various Mie-ken, 516-0021
various Fremont, California 94538
various Japan
various United States
various Telephone Number 81-59********
various 510-7********
various Fax Number 81-59********
various 510-6********
various E-mail T******@ul.com
various T******@ul.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)07/10/2016
various06/30/2016
various02/27/2016
various05/31/2015
various07/26/2014
various08/04/2014
various12/01/2013
various10/26/2013
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Wireless Network Adapter
variousModel 7260NGW Wireless Network Adapter
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II permissive change or modification of presently authorized equipment
variousChange in identification of presently authorized equipment. Original FCC ID: PD97260NG Grant Date: 04/17/2013
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsClass II permissive change to approve U-NII Band 3 according to new rules with module installed in previously granted host Panasonic FZ-M1. Original Grant Comments on 02/05/2014 were: Modular Approval. Power Output listed is conducted. Maximum output power is reduced when installed in this host. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. The highest reported SAR for the device is 0.39 W/kg for the device. The highest reported SAR for body and simultaneous transmission conditions across all filings under this FCC ID are 1.26 W/kg and 1.59 W/kg respectively.
variousClass II permissive change to approve U-NII Band 3 according to new rules with module installed in previously granted host Panasonic CF-C2. Original Grant Comments on 10/17/2013 were: Maximum output power is reduced when installed in this host. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15- 5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in laptop/Notebook/Netbook and Tablet Computer hosts is: 0.76 W/kg. Simultaneous TX: 1.02W/kg at 50mm antenna-to-antenna separation. The highest reported SAR for body and simultaneous transmission exposure conditions across all filings under this FCC ID are 1.26 W/kg and 1.59 W/kg respectively.
variousClass II permissive change to approve U-NII Band 3 according to new rules with module. Original Grant Comments on 04/17/2013 were: Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in laptop/Notebook/Netbook and Tablet Computer hosts is: 0.76 W/kg. Simultaneous TX: 1.02W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. The highest reported SAR for body and simultaneous transmission conditions across all filings under this FCC ID are 1.26 W/kg and 1.59 W/kg respectively.
variousClass II permissive change to update to new U-NII rules as documented in this filing. Module was installed into Panasonic FZ- Q1 host. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR for body and simultaneous transmission conditions are 1.26 W/kg and 1.59 W/kg respectively
variousClass II permissive change filing adds a new portable host (Panasonic/FZ- Q1) as documented in this filing. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR for body and simultaneous transmission conditions are 1.17 W/kg and 1.21 W/kg respectively.
variousClass II permissive change filing adds a new portable host (Panasonic/FZ-Q1) as documented in this filing. Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
variousClass II permissive change filing adds a new portable host (Panasonic/FZ- Q1) as documented in this filing. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR for body and simultaneous transmission conditions are 1.26 W/kg and 1.59 W/kg respectively.
variousClass II permissive change. Modular Approval. Module integrated in Panasonic model FZ-R1 with portable RF exposure conditions and collocated as described in this filing. Power Output listed is conducted. Maximum output power is reduced when installed in this host. The highest reported SAR for this device and simultaneous transmission is < 0.1 W/kg and 1.58 W/kg, respectively.
variousClass II permissive change. Modular Approval. Module integrated in Panasonic model FZ-R1 with portable RF exposure conditions and collocated as described in this filing. Power Output listed is conducted. Maximum output power is reduced when installed in this host. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band operations as described in this filing. This device supports 20, 40, and 80 MHz BW modes. The highest reported SAR for this device and simultaneous transmission is 0.57 W/kg and 1.58 W/kg, respectively.
variousClass II permissive change. Modular Approval. Module integrated in Panasonic model FZ-R1 with portable RF exposure conditions and collocated as described in this filing. Power Output listed is conducted. Maximum output power is reduced when installed in this host. Device is a 2 x 2 MIMO configuration, enabled for 2.4 GHz operations as described in this filing. This device supports 20 and 40 MHz BW modes. The highest reported SAR for this device and simultaneous transmission is 0.37 W/kg and 1.58 W/kg, respectively.
variousClass II permissive change filing adds a new portable host (Panasonic/FZ-G1) as documented in this filing. Output power is reduced when installed in this host. Professional installation is required when connecting with 5dBi external antenna with the car mounter and must be installed to provide a separation distance of at least 20 cm from all persons. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15- 5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in laptop/Notebook/Netbook and Tablet Computer hosts is: 0.76 W/kg. Simultaneous TX: 1.02W/kg at 50mm antenna-to-antenna separation. The highest reported SAR for the device is 0.34W/kg. The highest reported SAR value across all filings under this FCC ID is 1.18 W/Kg.
variousClass II permissive change filing adds a new portable host (Panasonic/FZ-G1) as documented in this filing. Professional installation is required when connecting with 5dBi external antenna with the car mounter and must be installed to provide a separation distance of at least 20 cm from all persons. Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 1.02W/kg at 50mm antenna-to-antenna separation.
variousClass II permissive change filing adds a new portable host (Panasonic/FZ-G1) as documented in this filing. Output power is reduced when installed in this host. Professional installation is required when connecting with 5dBi external antenna with the car mounter and must be installed to provide a separation distance of at least 20 cm from all persons. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in laptop/Notebook/Netbook and Tablet Computer hosts is: 0.55 W/kg. Simultaneous TX: 1.02W/kg at 50mm antenna-to-antenna separation. The highest reported SAR for the device is 0.52 W/kg. The highest reported SAR value across all filings under this FCC ID is 1.15 W/Kg.
variousClass II permissive change filing is for integration into a portable host (Panasonic FZ-M1) as documented in this filing. Modular Approval. Power Output listed is conducted. Maximum output power is reduced when installed in this host. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This device is restricted to indoor-only use for the 5150.0 - 5250.0 MHz band. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 06-96 as a Client only without Radar Detection. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. The highest reported SAR for the device is 0.29 W/kg.
variousClass II permissive change filing is for integration into a portable host (Panasonic FZ-M1) as documented in this filing. Modular Approval. Power Output listed is conducted. Maximum output power is reduced when installed in this host. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The highest reported SAR for the device is 0.13 W/kg.
variousClass II permissive change filing is for integration into a portable host (Panasonic FZ-M1) as documented in this filing. Modular Approval. Power Output listed is conducted. Maximum output power is reduced when installed in this host. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. The highest reported SAR for the device is 0.39 W/kg for the device.
variousClass II permissive change filing adds a new portable host (Panasonic/CF-C2) as documented in this filing. Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 1.02W/kg at 50mm antenna-to-antenna separation.
variousClass II permissive change filing adds a new portable host (Panasonic/CF-C2) as documented in this filing. Maximum output power is reduced when installed in this host. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in aptop/Notebook/Netbook and Tablet Computer hosts is: 0.55 W/kg. Simultaneous TX: 1.02W/kg at 50mm antenna-to-antenna separation. The highest reported SAR value for body and simultaneous transmission exposure conditions in this filing are 1.15 W/kg and 0.16 W/Kg respectively. The highest reported SAR value across all filings under this FCC ID is 1.15 W/Kg.
variousClass II permissive change filing adds a new portable host (Panasonic/CF-C2) as documented in this filing. Maximum output power is reduced when installed in this host. Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15- 5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in laptop/Notebook/Netbook and Tablet Computer hosts is: 0.76 W/kg. Simultaneous TX: 1.02W/kg at 50mm antenna-to-antenna separation. The highest reported SAR value for body and simultaneous transmission exposure conditions in this filing are 1.18 W/kg and 0.22 W/Kg respectively. The highest reported SAR value across all filings under this FCC ID is 1.18 W/Kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 1.02W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in laptop/Notebook/Netbook and Tablet Computer hosts is: 0.76 W/kg. Simultaneous TX: 1.02W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in aptop/Notebook/Netbook and Tablet Computer hosts is: 0.55 W/kg. Simultaneous TX: 1.02W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name UL Japan, Inc. Head office EMC Lab.
various UL Japan, Inc.
various PCTEST Engineering Laboratory, Inc.
various UL Japan, Inc
various TUV Rheinland Nederland B.V.
various Name T****** H******
various M****** I****
various R******** O****
various M**** F******
various R****** v******
various Telephone Number +81-5********
various 81-59********
various 410-2********
various 81-59********
various 31-08********
various Fax Number +81-5********
various 81-59********
various 410-2********
various 31-59********
various E-mail T******@jp.ul.com
various m******@ul.com
various l******@pctestlab.com
various m******@jp.ul.com
various r******@nl.tuv.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E 38 CC MO 5180 5240 0.036
1 2 15E 38 CC MO 5190 5230 0.037
1 3 15E 38 CC MO ND 5260 5320 0.038
1 4 15E 38 CC MO ND 5500 5700 0.046
1 5 15E 38 CC MO ND 5510 5670 0.046
1 6 15E 38 CC MO ND 5710 5710 0.038
1 7 15E 38 CC MO ND 5720 5720 0.036
1 8 15E 38 CC MO ND 5530 5690 0.046
1 9 15E 38 CC MO 5745 5825 0.033
1 1 15E 38 CC MO 5755 5795 0.038
1 11 15E 38 CC MO 5775 5775 0.02
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E 38 CC MO 5180 5240 0.036
2 2 15E 38 CC MO 5190 5230 0.037
2 3 15E 38 CC MO ND 5260 5320 0.038
2 4 15E 38 CC MO ND 5500 5700 0.046
2 5 15E 38 CC MO ND 5510 5670 0.046
2 6 15E 38 CC MO ND 5710 5710 0.038
2 7 15E 38 CC MO ND 5720 5720 0.036
2 8 15E 38 CC MO ND 5530 5690 0.046
2 9 15E 38 CC MO 5745 5825 0.033
2 1 15E 38 CC MO 5755 5795 0.038
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E 38 CC MO 5180 5240 0.036
3 2 15E 38 CC MO 5190 5230 0.037
3 3 15E 38 CC MO ND 5260 5320 0.038
3 4 15E 38 CC MO ND 5500 5700 0.046
3 5 15E 38 CC MO ND 5510 5670 0.046
3 6 15E 38 CC MO ND 5710 5710 0.038
3 7 15E 38 CC MO ND 5720 5720 0.036
3 8 15E 38 CC MO ND 5530 5690 0.046
3 9 15E 38 CC MO 5745 5825 0.033
3 1 15E 38 CC MO 5755 5795 0.038
3 11 15E 38 CC MO 5775 5775 0.04
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E 38 CC MO 5180 5240 0.036
4 2 15E 38 CC MO 5190 5230 0.037
4 3 15E 38 CC MO ND 5260 5320 0.038
4 4 15E 38 CC MO ND 5500 5700 0.046
4 5 15E 38 CC MO ND 5510 5670 0.046
4 6 15E 38 CC MO ND 5710 5710 0.038
4 7 15E 38 CC MO ND 5720 5720 0.036
4 8 15E 38 CC MO ND 5530 5690 0.046
4 9 15E 38 CC MO 5745 5825 0.032
4 1 15E 38 CC MO 5755 5795 0.035
4 11 15E 38 CC MO 5775 5775 0.035
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402 2480 0.006
5 2 15C CC MO 2412 2462 0.316
5 3 15C CC MO 2422 2452 0.347
5 4 15C CC MO 5745 5825 0.355
5 5 15C CC MO 5755 5795 0.174
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E CC MO 5180 5240 0.036
7 2 15E CC MO 5190 5230 0.037
7 3 15E CC MO ND 5260 5320 0.038
7 4 15E CC MO ND 5500 5700 0.046
7 5 15E CC MO ND 5510 5670 0.046
7 6 15E CC MO ND 5710 5710 0.038
7 7 15E CC MO ND 5720 5720 0.036
7 8 15E CC MO ND 5530 5690 0.046
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E 38 CC MO 5180 5240 0.035
9 2 15E 38 CC MO 5190 5230 0.037
9 3 15E 38 CC MO 5260 5320 0.038
9 4 15E 38 CC MO 5500 5700 0.046
9 5 15E 38 CC MO 5510 5670 0.046
9 6 15E 38 CC MO 5710 5710 0.038
9 7 15E 38 CC MO 5720 5720 0.036
9 8 15E 38 CC MO 5530 5690 0.046
9 9 15E 38 CC MO 5745 5825 0.355
9 1 15E 38 CC MO 5755 5795 0.174
9 11 15E 38 CC MO 5775 5775 0.018
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402 2480 0.006
10 2 15C CC MO 2412 2462 0.316
10 3 15C CC MO 2422 2452 0.347
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E 36 CC MO 5180 5240 0.036
11 2 15E 36 CC MO 5190 5230 0.037
11 3 15E 36 CC MO ND 5260 5320 0.038
11 4 15E 36 CC MO ND 5500 5700 0.046
11 5 15E 36 CC MO ND 5510 5670 0.046
11 6 15E 36 CC MO ND 5710 5710 0.038
11 7 15E 36 CC MO ND 5720 5720 0.036
11 8 15E 36 CC MO ND 5530 5690 0.046
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402 2480 0.006
13 2 15C 36 CC MO 2412 2462 0.316
13 3 15C 36 CC MO 2422 2452 0.347
13 4 15C 36 CC MO 5745 5825 0.355
13 5 15C 36 CC MO 5755 5795 0.174
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E CC MO 5180 5240 0.036
14 2 15E CC MO 5190 5230 0.037
14 3 15E CC MO ND 5260 5320 0.038
14 4 15E CC MO ND 5500 5700 0.046
14 5 15E CC MO ND 5510 5670 0.046
14 6 15E CC MO ND 5710 5710 0.038
14 7 15E CC MO ND 5720 5720 0.036
14 8 15E CC MO ND 5530 5690 0.046
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402 2480 0.006
16 2 15C CC MO 2412 2462 0.316
16 3 15C CC MO 2422 2452 0.347
16 4 15C CC MO 5745 5825 0.355
16 5 15C CC MO 5755 5795 0.174
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402 2480 0.006
18 2 15C CC MO 2412 2462 0.316
18 3 15C CC MO 2422 2452 0.347
18 4 15C CC MO 5745 5825 0.355
18 5 15C CC MO 5755 5795 0.174
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15E CC MO 5180 5240 0.036
19 2 15E CC MO 5190 5230 0.037
19 3 15E CC MO ND 5260 5320 0.038
19 4 15E CC MO ND 5500 5700 0.046
19 5 15E CC MO ND 5510 5670 0.046
19 6 15E CC MO ND 5710 5710 0.038
19 7 15E CC MO ND 5720 5720 0.036
19 8 15E CC MO ND 5530 5690 0.046
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15E CC MO 5180 5240 0.036
21 2 15E CC MO 5190 5230 0.037
21 3 15E CC MO ND 5260 5320 0.038
21 4 15E CC MO ND 5500 5700 0.046
21 5 15E CC MO ND 5510 5670 0.046
21 6 15E CC MO ND 5710 5710 0.038
21 7 15E CC MO ND 5720 5720 0.036
21 8 15E CC MO ND 5530 5690 0.046
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15C CC 2402 2480 0.006
23 2 15C CC MO 2412 2462 0.316
23 3 15C CC MO 2422 2452 0.347
23 4 15C CC MO 5745 5825 0.355
23 5 15C CC MO 5755 5795 0.174

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC