FCC ID: ACJ9TGWL15B Wireless Network Adapter

by: Panasonic Corporation of North America latest update: 2016-10-28 model: 9TGWL15B

Fourteen grants have been issued under this FCC ID from 12/18/2015 to 10/28/2016 (this is one of ninety-six releases in 2016 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked drivers, instructions, troubleshooting guides, password defaults, & warrantee terms.
permalink for this FCC identifier
|
|
|   
eg for Slack usage
app s submitted / available
various FZ-M1 User Manual rev2 Users Manual pdf 1.24 MiB
various FZ-M1 WLAN and BT OI Manual Users Manual pdf 218.81 KiB
various User manual Users Manual pdf 1.13 MiB
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Attestation Statements pdf
various External Photos pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Internal Photos pdf
various ID Label/Location Info pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various External Photos pdf May 08 2016
various Cover Letter(s) pdf May 08 2016
various ID Label/Location Info pdf May 08 2016
various RF Exposure Info pdf May 08 2016
various Test Setup Photos pdf May 08 2016
various Cover Letter(s) pdf October 05 2016
various Cover Letter(s) pdf October 05 2016
various Test Report pdf October 05 2016
various Test Setup Photos pdf October 05 2016
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various ID Label/Location Info pdf
various External Photos pdf
various Internal Photos pdf
various ID Label/Location Info pdf
various External Photos pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various ID Label/Location Info pdf
various FZ-M1 User Manual rev2 Users Manual pdf 1.24 MiB
various FZ-M1 WLAN and BT OI Manual Users Manual pdf 218.81 KiB
various User manual Users Manual pdf 1.13 MiB

frequency equipment class purpose
1 2016-10-28 2422 ~ 2462 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
2 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 2016-08-05 2422 ~ 2462 DTS - Digital Transmission System
5 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
7 2016-05-10 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
8 2016-01-15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 5775 ~ 5775 DTS - Digital Transmission System
10 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
11 2015-12-19 JBP - Part 15 Class B Computing Device Peripheral Change in identification of presently authorized equipment. Original FCC ID: PD98260D2 Grant Date: 08/14/2015
12 2015-12-18 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
13 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
14 5775 ~ 5775 DTS - Digital Transmission System

Application Forms

app s Applicant Information
various Effective 2016-10-28
various 2016-08-05
various 2016-05-10
various 2016-01-15
various 2015-12-19
various 2015-12-18
various Applicant's complete, legal business name Panasonic Corporation of North America
various FCC Registration Number (FRN) 0003762242
various Physical Address Two Riverfront Plaza, 9th Floor
various Newark, New Jersey 07102-5490
various United States
app s TCB Information
various TCB Application Email Address t******@siemic.com
various c******@ccsemc.com
various L******@ul.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code ACJ
various Equipment Product Code 9TGWL15B
app s Person at the applicant's address to receive grant or for contact
various Name B******** B******
various Title Project Manager
various Telephone Number 201-3********
various Fax Number 201-3********
various E-mail B******@us.panasonic.com
app s Technical Contact
various Firm Name UL Japan, Inc.
various Name T****** H******
various Physical Address 4383-326 Asama-cho, Ise-shi
various Mie-ken, 516-0021
various Japan
various Telephone Number 81-59********
various Fax Number 81-59********
various E-mail T******@ul.com
app s Non Technical Contact
various Firm Name UL Japan, Inc.
various Name T**** H******
various Physical Address 4383-326 Asama-cho, Ise-shi
various Mie-ken, 516-0021
various Japan
various Telephone Number 81-59********
various Fax Number 81-59********
various E-mail T******@ul.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
variousYes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)04/27/2017
various09/19/2016
various02/28/2016
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDTS - Digital Transmission System
variousNII - Unlicensed National Information Infrastructure TX
variousDSS - Part 15 Spread Spectrum Transmitter
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Wireless Network Adapter
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousYes
variousModular Equipment TypeSingle Modular Approval
variousPurpose / Application is forClass II permissive change or modification of presently authorized equipment
variousChange in identification of presently authorized equipment. Original FCC ID: PD98260D2 Grant Date: 08/14/2015
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsCIIPC to add host Panasonic Tablet Computer model FZ-Q2. Highest reported Stand-Alone and Simultaneous SAR values are: 0.56W/kg and 1.59W/kg respectively. Class II permissive change to install into Panasonic FZ-M1 tablet computer using reduced power table as described in this filing. The highest reported SAR value under this filing is 1.19 W/Kg. Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousCIIPC to add host Panasonic Tablet Computer model FZ-Q2. Highest reported Stand-Alone and Simultaneous SAR values are: 1.16W/kg and 1.59W/kg respectively. Class II permissive change to update to new U-NII rules as documented in this filing. Module was installed into Panasonic FZ-M1 tablet computer using a reduced power table. The highest reported SAR value under this filing is 1.19 W/Kg. Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousCIIPC to add host Panasonic Tablet Computer model FZ-Q2. Highest reported Stand-Alone and Simultaneous SAR values are: < 0.10W/kg and 1.59W/kg respectively. Class II permissive change to install into Panasonic FZ-M1 tablet computer. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Stand-Alone and Simultaneous SAR values are: 0.01W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousCIIPC to add host Panasonic Personal Computer model FZ-A2. Highest reported Stand-Alone and Simultaneous SAR values are: 1.05W/kg and 1.58W/kg respectively. Class II permissive change to install into Panasonic FZ-M1 tablet computer using reduced power table as described in this filing. The highest reported SAR value under this filing is 1.19 W/Kg. Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01
variousCIIPC to add host Panasonic Personal Computer model FZ-A2. Highest reported Stand-Alone and Simultaneous SAR values are: 1.39W/kg and 1.59W/kg respectively. Class II permissive change to update to new U-NII rules as documented in this filing. Module was installed into Panasonic FZ-M1 tablet computer using a reduced power table. The highest reported SAR value under this filing is 1.19 W/Kg. Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousCIIPC to add host Panasonic Personal Computer model FZ-A2. Highest reported Stand-Alone and Simultaneous SAR values are: < 0.10W/kg and 1.56W/kg respectively. Class II permissive change to install into Panasonic FZ-M1 tablet computer. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Stand-Alone and Simultaneous SAR values are: 0.01W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousClass II permissive change to update to new U-NII rules as documented in this filing. Module was installed into Panasonic FZ-M1 tablet computer using a reduced power table. The highest reported SAR value under this filing is 1.19 W/Kg. Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousClass II permissive change to install into Panasonic FZ-M1 tablet computer. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Stand-Alone and Simultaneous SAR values are: 0.01W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousClass II permissive change to install into Panasonic FZ-M1 tablet computer using reduced power table as described in this filing. The highest reported SAR value under this filing is 1.19 W/Kg. Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousClass II permissive change to install into Panasonic FZ-M1 tablet computer using reduced power table as described in this filing. The highest reported SAR value under this filing is 0.97 W/Kg. Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Stand-Alone and Simultaneous SAR values are: 0.97W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name UL Japan, Inc. Head office EMC Lab.
various UL Japan, Inc.
various Name T******** H********
various M****** I******
various Telephone Number +81-5********
various 81-59********
various Fax Number +81-5********
various 81-59********
various E-mail T******@jp.ul.com
various m******@ul.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402 2480 0.01
1 2 15C CC MO 2412 2472 0.3606
1 3 15C CC MO 2422 2462 0.2427
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E 38 CC MO 5180 5240 0.1393
2 2 15E 38 CC MO 5190 5230 0.1374
2 3 15E 38 CC MO 5210 5210 0.0969
2 4 15E 38 CC MO ND 5260 5320 0.1389
2 5 15E 38 CC MO ND 5270 5310 0.1369
2 6 15E 38 CC MO ND 5290 5290 0.0884
2 7 15E 38 CC MO ND 5500 5700 0.1383
2 8 15E 38 CC MO ND 5510 5670 0.1407
2 9 15E 38 CC MO ND 5530 5690 0.189
2 1 15E 38 CC MO ND 5710 5710 0.145
2 11 15E 38 CC MO ND 5720 5720 0.1918
2 12 15E 38 CC MO 5745 5825 0.0448
2 13 15E 38 CC MO 5755 5795 0.0485
2 14 15E 38 CC MO 5775 5775 0.0474
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0138000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.01
4 2 15C CC MO 2412 2472 0.3606
4 3 15C CC MO 2422 2462 0.2427
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E 38 CC MO 5180 5240 0.1393
5 2 15E 38 CC MO 5190 5230 0.1374
5 3 15E 38 CC MO 5210 5210 0.0969
5 4 15E 38 CC MO ND 5260 5320 0.1389
5 5 15E 38 CC MO ND 5270 5310 0.1369
5 6 15E 38 CC MO ND 5290 5290 0.0884
5 7 15E 38 CC MO ND 5500 5700 0.1383
5 8 15E 38 CC MO ND 5510 5670 0.1407
5 9 15E 38 CC MO ND 5530 5690 0.189
5 1 15E 38 CC MO ND 5710 5710 0.145
5 11 15E 38 CC MO ND 5720 5720 0.1918
5 12 15E 38 CC MO 5745 5825 0.0448
5 13 15E 38 CC MO 5755 5795 0.0485
5 14 15E 38 CC MO 5775 5775 0.0474
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0138000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E 38 CC MO 5180 5240 0.1393
7 2 15E 38 CC MO 5190 5230 0.1374
7 3 15E 38 CC MO 5210 5210 0.0969
7 4 15E 38 CC MO ND 5260 5320 0.1389
7 5 15E 38 CC MO ND 5270 5310 0.1369
7 6 15E 38 CC MO ND 5290 5290 0.0884
7 7 15E 38 CC MO ND 5500 5700 0.1383
7 8 15E 38 CC MO ND 5510 5670 0.1407
7 9 15E 38 CC MO ND 5530 5690 0.189
7 1 15E 38 CC MO ND 5710 5710 0.145
7 11 15E 38 CC MO ND 5720 5720 0.1918
7 12 15E 38 CC MO 5745 5825 0.0448
7 13 15E 38 CC MO 5755 5795 0.0485
7 14 15E 38 CC MO 5775 5775 0.0474
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0138000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402 2480 0.01
9 2 15C CC MO 2412 2472 0.3606
9 3 15C CC MO 2422 2462 0.2427
9 4 15C CC MO 5745 5825 0.3908
9 5 15C CC MO 5755 5795 0.3733
9 6 15C CC MO 5775 5775 0.2393
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E CC MO 5180 5240 0.1393
10 2 15E CC MO 5190 5230 0.1374
10 3 15E CC MO 5210 5210 0.0969
10 4 15E CC MO ND 5260 5320 0.1389
10 5 15E CC MO ND 5270 5310 0.1369
10 6 15E CC MO ND 5290 5290 0.0884
10 7 15E CC MO ND 5500 5700 0.1383
10 8 15E CC MO ND 5510 5670 0.1407
10 9 15E CC MO ND 5530 5690 0.189
10 1 15E CC MO ND 5710 5710 0.145
10 11 15E CC MO ND 5720 5720 0.1918
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E CC MO 5180 5240 0.1393
12 2 15E CC MO 5190 5230 0.1374
12 3 15E CC MO 5210 5210 0.0969
12 4 15E CC MO ND 5260 5320 0.1389
12 5 15E CC MO ND 5270 5310 0.1369
12 6 15E CC MO ND 5290 5290 0.0884
12 7 15E CC MO ND 5500 5700 0.1383
12 8 15E CC MO ND 5510 5670 0.1407
12 9 15E CC MO ND 5530 5690 0.189
12 1 15E CC MO ND 5710 5710 0.145
12 11 15E CC MO ND 5720 5720 0.1918
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0138000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402 2480 0.01
14 2 15C CC MO 2412 2472 0.3606
14 3 15C CC MO 2422 2462 0.2427
14 4 15C CC MO 5745 5825 0.3908
14 5 15C CC MO 5755 5795 0.3733
14 6 15C CC MO 5775 5775 0.2393

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC