all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Short Term Confidentiality User Manual | Users Manual | 2.69 MiB | October 01 2013 | |||
1 | ID Label/Location Info | October 01 2013 | ||||||
1 | Cover Letter(s) | October 01 2013 | ||||||
1 | RF Exposure Info | October 01 2013 | ||||||
1 | Cover Letter(s) | October 01 2013 | ||||||
1 | Test Report | October 01 2013 | ||||||
1 | ID Label/Location Info | October 01 2013 | ||||||
1 | External Photos | October 01 2013 | ||||||
1 | Test Setup Photos | October 01 2013 | ||||||
1 | Internal Photos | October 01 2013 |
1 | Short Term Confidentiality User Manual | Users Manual | 2.69 MiB | October 01 2013 |
SC-NE1_PPC~VQT4T91.book 1 Owners Manual Wireless Speaker System Model No. SC-NE1 I H S L G N E L O A P S E Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. If you have any questions, contact:
U.S.A. and Puerto Rico: 1-800-211-PANA (7262) Canada: 1-800-561-5505 Register online at www.panasonic.com/register (U.S. customers only) Included Installation Instructions (l 2, 3 and 10, 11) The installation work should be done by a qualified installation specialist. Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly.
(Please keep these instructions. You may need them when maintaining or moving this unit.) La referencia rpida en espaol se puede encontrar en la pgina 13. P PC VQT4T91 until 2013/1/17 SC-NE1_PPC~VQT4T91.book 2 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. instructions listed below. Keep these operating instructions handy for future reference. 1 1 2 2 3 3 4 4 5 5 6 6 7 7 DO NOT INGEST BATTERY, DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD CHEMICAL BURN HAZARD Read these instructions. Read these instructions. Keep these instructions. Keep these instructions. Heed all warnings. Heed all warnings. Follow all instructions. Follow all instructions. Do not use this apparatus near water. Do not use this apparatus near water. Clean only with dry cloth. Clean only with dry cloth. Do not block any ventilation openings. Install in Do not block any ventilation openings. Install in accordance with the manufacturers instructions. accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including heat registers, stoves, or other apparatus (including amplifiers) that produce heat. amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. replacement of the obsolete outlet. 8 8 9 9 10 Protect the power cord from being walked on or pinched 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. point where they exit from the apparatus. 11 Only use attachments/accessories specified by the 11 Only use attachments/accessories specified by the manufacturer. manufacturer. 12 Use only with the cart, stand, tripod, 12 Use only with the cart, stand, tripod, bracket, or table specified by the bracket, or table specified by the manufacturer, or sold with the manufacturer, or sold with the apparatus. When a cart is used, use apparatus. When a cart is used, use caution when moving the cart/apparatus caution when moving the cart/apparatus combination to avoid injury from combination to avoid injury from tip-over. tip-over. 13 Unplug this apparatus during lightning storms or when 13 Unplug this apparatus during lightning storms or when unused for long periods of time. unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. not operate normally, or has been dropped. WARNING WARNING Unit Unit To reduce the risk of fire, electric shock or product damage, To reduce the risk of fire, electric shock or product damage, Do not expose this unit to rain, moisture, dripping or Do not expose this unit to rain, moisture, dripping or splashing. splashing. this unit. this unit. Do not place objects filled with liquids, such as vases, on Do not place objects filled with liquids, such as vases, on Use only the recommended accessories. Use only the recommended accessories. Do not remove covers. Do not remove covers. Do not repair this unit by yourself. Refer servicing to Do not repair this unit by yourself. Refer servicing to qualified service personnel. qualified service personnel. AC power supply cord AC power supply cord The power plug is the disconnecting device. The power plug is the disconnecting device. Install this unit so that the power plug can be unplugged from Install this unit so that the power plug can be unplugged from the socket outlet immediately. the socket outlet immediately. Button-type battery (Lithium battery) Button-type battery (Lithium battery) Risk of fire, explosion and burns. Do not disassemble, heat Risk of fire, explosion and burns. Do not disassemble, heat above 60 oC (140 oF) or incinerate. above 60 oC (140 oF) or incinerate. 2 VQT4T91 This product contains a coin/button cell battery. If the coin/
This product contains a coin/button cell battery. If the coin/
button cell battery is swallowed, it can cause severe button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the Keep new and used batteries away from children. If the battery compartment does not close securely, stop using battery compartment does not close securely, stop using the product and keep it away from children. the product and keep it away from children. If you think batteries might have been swallowed or placed If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. inside any part of the body, seek immediate medical attention. If any electrolyte should come into contact with your hands If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water. or clothes, wash it off thoroughly with water. If any electrolyte should come into contact with your eyes, If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor. then consult a doctor.
<For USA-California only>
<For USA-California only>
This product contains a CR Coin Cell Lithium Battery which This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material s special handling may apply. contains Perchlorate Material s special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. See www.dtsc.ca.gov/hazardouswaste/perchlorate. CAUTION CAUTION Unit Unit Do not place sources of naked flames, such as lighted Do not place sources of naked flames, such as lighted Placement Placement To reduce the risk of fire, electric shock or product damage, To reduce the risk of fire, electric shock or product damage, candles, on this unit. candles, on this unit. Do not install or place this unit in a bookcase, built-in Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is cabinet or in another confined space. Ensure this unit is well ventilated. well ventilated. Do not obstruct this units ventilation openings with Do not obstruct this units ventilation openings with newspapers, tablecloths, curtains, and similar items. newspapers, tablecloths, curtains, and similar items. Button-type battery (Lithium battery) Button-type battery (Lithium battery) Danger of explosion if battery is incorrectly replaced. Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the Replace only with the type recommended by the manufacturer. manufacturer. Keep out of reach of children. Keep out of reach of children. Insert with poles aligned. Insert with poles aligned. Mishandling of batteries can cause electrolyte leakage and Mishandling of batteries can cause electrolyte leakage and may cause a fire. may cause a fire. Remove batteries if you do not intend to use the remote Remove batteries if you do not intend to use the remote control for a long period of time. Store in a cool, dark control for a long period of time. Store in a cool, dark place. place. Do not heat or expose to flame. Do not heat or expose to flame. Do not leave the battery(ies) in a car exposed to direct Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows sunlight for a long period of time with doors and windows closed. closed. Do not touch the terminals (i and j) with metal objects. Do not touch the terminals (i and j) with metal objects. Do not recharge, disassemble, remodel, heat or throw into fire. Do not recharge, disassemble, remodel, heat or throw into fire. When disposing the batteries, please contact your local When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of authorities or dealer and ask for the correct method of disposal. disposal. SC-NE1_PPC~VQT4T91.book 3 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Product Identification Marking is located on the bottom of the unit.
-If you see this symbol-
Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Table of contents IMPORTANT SAFETY INSTRUCTIONS............2 Accessories .......................................................4 About Bluetooth ..............................................4 Control reference guide....................................5 Connections ......................................................6 Bluetooth operations ......................................7 Sound adjustment.............................................8 Others.................................................................8 Troubleshooting................................................9 Attaching the unit to a wall (optional) ...........10 Specifications..................................................12 Unit care...........................................................12 License.............................................................12 Spanish Quick Reference /
Referencia rpida en espaol ........................13 Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO) ................................................14 Limited Warranty (ONLY FOR CANADA).......15 About descriptions in this Owners Manual Pages to be referred to are indicated as l OO. Unless otherwise indicated, operations are described using the remote control. 3 VQT4T91 SC-NE1_PPC~VQT4T91.book 4 Accessories Check the supplied accessories before using this unit. 1 Remote control (with a battery)
(N2QAYC000091) 1 AC power supply cord
(K2CB2CB00022) Wall mounting accessories 1 Screw
(XTB3+8JFJK-J) 1 Safety holder
(RGQ0660-K) 2 Wall mount brackets
(RMQX1082-S)
(ONLY FOR CANADA) The enclosed Canadian French label sheet corresponds to the English display on the top of the unit.
Do not use AC power supply cord with other equipment. Product numbers provided in this Owners Manual are correct as of December 2012. These may be subject to change. About Bluetooth Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. Frequency band used This unit uses the 2.4 GHz frequency band. Certification of this device This system conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. The actions below are punishable by law in some countries:
Taking apart or modifying the unit. Removing specification indications. Restrictions of use Wireless transmission and/or usage with all Bluetooth equipped devices is not guaranteed. All devices must conform to standards set by Bluetooth SIG, Inc. Depending on the specifications and settings of a device, it can fail to connect or some operations can be different. This system supports Bluetooth security features. But depending on the operating environment and/or settings, this security is possibly not sufficient. Transmit data wirelessly to this system with caution. This system cannot transmit data to a Bluetooth device. Range of use Use this device at a maximum range of 10 m
(33 ft). The range can decrease depending on the environment, obstacles or interference. Interference from other devices This unit may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference if this unit is located too close to other Bluetooth devices or the devices that use the 2.4 GHz band. This unit may not function properly if radio waves from a nearby broadcasting station, etc. is too strong. Intended usage This unit is for normal, general use only. Do not use this system near an equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc). 4 VQT4T91 SC-NE1_PPC~VQT4T91.book 5 Control reference guide Top view VOLUME 5 1 2 3 1 4 9 10 11 SOUND SETUP PLAY MENU OK I H S L G N E 4 5 6 7 8 1 Standby/on switch [/I] ([]) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. Before using for the first time Remove the insulation sheet A . 2 Enter sound menu 3 Enter setup menu 4 Select Bluetooth/AUX 5 Adjust the volume (0 (min) to 50 (max)) 6 Enter the Bluetooth menu/
Change the sound input level of the external device (l 6) 7 Mute the sound Mutes the sound. Press again to cancel. MUTE is also canceled when the volume is adjusted or the unit is turned off. 8 Selection/OK 9 Dynamic Bass sound effect selector 10 Display 11 Remote control signal sensor Distance: Within approx. 7 m (23 ft) directly in front. To avoid interference, please do not put any objects in front of signal sensor. To replace a button-type battery Battery type: CR2025 (Lithium battery) 1 2 Set the button-type battery with its (i) mark facing upward. Keep the button-type battery out of reach of children to prevent swallowing. 5 VQT4T91 SC-NE1_PPC~VQT4T91.book 6 Connections
Connect the AC power supply cord. This unit consumes a small amount of AC power (l 12) even when turned off. In the interest of power conservation, if you will not be using this unit for an extended period of time, unplug it from the household AC outlet. To a household AC outlet AC Power supply cord (supplied)
These speakers do not have magnetic shielding. Do not place them near a television, personal computer or other devices easily influenced by magnetism. Additional Connection
Connect an external music device (for AUX mode). 1 Plug the audio cable (not supplied) into the AUX jack. Plug type: 3.5 mm (1/8q) stereo 2 Press [
, AUX] to select AUX and start playback on the connected device. To select the sound input level of the external device 1 While in AUX mode, press [PLAY MENU] repeatedly to select INPUT LEVEL and then press [OK]. 2 Press [3, 4] to select NORMAL or HIGH. The default setting is NORMAL. Audio cable (not supplied)
Switch the equalizer off or turn the volume of the external device down to reduce the input signal. High level of input signal will distort the sound. For details, refer to the instruction manual of the other equipment. The cables and the devices are not supplied. 6 VQT4T91 SC-NE1_PPC~VQT4T91.book 7 Bluetooth operations By using the Bluetooth connection, you can listen to the sound from the Bluetooth audio device from this unit wirelessly. Refer to the operating instructions of the Bluetooth device for details. Pairing Bluetooth devices Bluetooth transmission mode Preparation Turn on the Bluetooth feature of the device and place the device near this unit. If this unit is already connected to a Bluetooth device, disconnect it. 1 Press [
2 Press [PLAY MENU] to select NEW DEV. and If PAIRING is indicated on the display, go to step 3.
, AUX] to select BLUETOOTH. then press [OK].
{. PAIRING is indicated on the display. 3 Select SC-NE1 from the Bluetooth devices 4 Start play on the Bluetooth device. Bluetooth menu.
If prompted for the passkey, input 0000. You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used for the longest time will be replaced. Connecting a paired Bluetooth device Preparation Turn on the Bluetooth feature of the device and place the device near this unit. If this unit is already connected to a Bluetooth device, disconnect it. 1 Press [
2 Select SC-NE1 from the Bluetooth devices
, AUX] to select BLUETOOTH.
{. READY is indicated on the display. Bluetooth menu.
{. The name of the connected device is indicated on the display for 2 seconds. 3 Start play on the Bluetooth device.
This unit can only be connected to one device at a time. When BLUETOOTH is selected as the source, this unit will automatically try and connect to the last connected Bluetooth device. The Bluetooth device will be disconnected if AUX is selected as an audio source. You can change the transmission speed to prioritize transmission quality or sound quality. Preparation Press [
If a Bluetooth device is already connected,
, AUX] to select BLUETOOTH. disconnect it. 1 Press [PLAY MENU] repeatedly to select 2 Press [3, 4] to select the mode and then LINK MODE. I H S L G N E press [OK]. MODE 1: Emphasis on connectivity MODE 2: Emphasis on sound quality
The default setting is MODE 1. Bluetooth input level If the sound input level of the Bluetooth transmission is too low, change the input level setting. Preparation Connect a Bluetooth device. 1 Press [PLAY MENU] repeatedly to select 2 Press [3, 4] to select the level and then press INPUT LEVEL.
[OK]. LEVEL 0 ,. LEVEL +1 ,. LEVEL +2
^----------------------------------------------------J
Select LEVEL 0 if the sound is distorted. The default setting is LEVEL 0. Disconnecting a Bluetooth device 1 While a Bluetooth device is connected:
Press [PLAY MENU] to select DISCONNECT?. 2 Press [3, 4] to select OK? YES and then press [OK]. 7 VQT4T91 SC-NE1_PPC~VQT4T91.book 8 Sound adjustment The following sound effects can be added to the audio output. 1 Press [SOUND] repeatedly to select the effect. 2 Press [3, 4] to select the setting and then press [OK]. Direct-Vocal Surround
(D.SURROUND) Preset EQ
(PRESET EQ) Bass (BASS) or Treble (TREBLE) Dynamic Bass*
(D.BASS) LEVEL 1, LEVEL 2 or OFF. The factory preset is OFF. HEAVY (heavy), SOFT
(soft), CLEAR (clear), VOCAL (vocal) or FLAT
(flat/off). The factory preset is HEAVY. Adjust the level (j4 to i4). ON D.BASS or OFF D.BASS. The factory preset is ON D.BASS.
* This function can also be selected with the [D.BASS] button on the unit. You may experience a reduction in sound quality when these effects are used with some sources. If this occurs, turn the sound effects off. Others Sleep timer The sleep timer can turn the unit off after a set time. 1 Press [SETUP] to select SLEEP. 2 Press [3, 4] to set the time (in minutes) and then press [OK]. SLEEP 30 ,. SLEEP 60 ,. SLEEP 90 ,. SLEEP 120
^--------------------. OFF (Cancel) (--------------------J The remaining time is indicated on the units display except when other operations are performed. Display brightness The brightness of this units display can be changed. 1 Press [SETUP] repeatedly to select DIMMER. 2 Press [3, 4] to select ON and then press
[OK].
To cancel the dimmer, select OFF in step 2. Automatic standby As a factory preset, this unit will always turn off automatically if there is no sound output and no operation for approx. 30 minutes. To cancel this function 1 Press [SETUP] repeatedly to select 2 Press [3, 4] to select OFF and then press AUTO OFF.
[OK].
To turn automatic standby on, select ON in step 2. Changing the unit and remote control code When other Panasonic equipment responds to the supplied remote control, change the remote control code. 1 Press [
2 While pressing and holding [
/ AUX] on the unit, press and hold [SOUND] on the remote control until the units display shows REMOTE 2.
, AUX] to select AUX. 3 Press and hold [OK] and [SOUND] on the remote control for at least 4 seconds.
To change the mode back to REMOTE 1, repeat the steps above but replace the button pressed on the remote control from [SOUND] to [
, AUX]. 8 VQT4T91 SC-NE1_PPC~VQT4T91.book 9 Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, refer to Customer Services Directory (United States and Puerto Rico) on page 14 if you reside in the U.S.A. or Puerto Rico, or refer to Limited Warranty (ONLY FOR CANADA) on page 15 if you reside in Canada. To return all settings to the factory preset When the following situations occur, reset the memory:
There is no response when buttons are pressed. You want to clear and reset the memory contents. 1 Disconnect the AC power supply cord. (Wait for at least 3 minutes before proceeding to step 2.) 2 While pressing and holding down [/I] on the unit, reconnect the AC power supply cord. Keep holding down [/I] until --------
appears on the display. 3 Release [/I].
All the settings are returned to the factory preset. You will need to reset the memory items. Common problems Humming heard during play. An AC power supply cord or fluorescent light is near the cords. Keep other appliances and cords away from this units cables. Bluetooth Pairing cannot be done. Check the Bluetooth device condition. The device cannot be connected. The pairing of the device was unsuccessful or the registration has been replaced. Try pairing the device again. This unit might be connected to a different device. Disconnect the other device and try pairing the device again. Remote control The remote control doesn't work properly. The remote control and this unit are using a different code.
(l below, REMOTE ) Is the battery depleted or is the battery inserted incorrectly?
(l 5) I H S L G N E Messages The following messages or service numbers may appear on the unit's display. AUTO OFF The unit has been left unused for about 30 minutes and will shut down within a minute. Press any button to cancel it. DIMMER Appears 10 seconds after the volume is turned to 0. ERROR Incorrect operation is performed. Read the instructions and try again. F ( stands for a number.) There is a problem with this unit. Note down the displayed number, disconnect the AC power supply cord and consult your dealer. REMOTE ( stands for a number.) The remote control and this unit are using different codes. Change the code on the remote control. When REMOTE 1 is displayed, press and hold [OK] and
[
, AUX] for more than 4 seconds. When REMOTE 2 is displayed, press and hold [OK] and
[SOUND] for more than 4 seconds. The device is connected but audio cannot be heard through this unit. For some built-in Bluetooth devices, you have to set the audio output to SC-NE1 manually. Read the operating instructions for the device for details. The sound is interrupted. The device is out of the 10 m (33 ft) communication range. Bring the Bluetooth device closer to this unit. Remove any obstacle between this unit and the device. Other devices that use the 2.4 GHz frequency band (wireless router, microwaves, cordless phones, etc.) are interfering. Bring the Bluetooth device closer to this unit and distance it from the other devices. Select MODE 1 for stable communication. (l 7). 9 VQT4T91 SC-NE1_PPC~VQT4T91.book 10 Attaching the unit to a wall (optional) This unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg (72.8 lbs). The screws and other items are not supplied as the type and size will vary with each installation. Refer to step 2 of Wall mount instructions for details about the required screws. Be sure to attach the fall prevention cord as a secondary safety measure. Installation accessories Wall mount instructions Before installation, turn the unit off and disconnect the AC power supply cord from the AC outlet. 1 Measure and mark the position of the wall mount brackets (Both sides).
{. Use figures below to identify the screwing positions. The position to attach the wall mount brackets 12.5 mm (1/2q) 252 mm (9 29/32q) Space required 300 mm (11 13/16q) 82 mm (3 7/32q) 67 mm (2 5/8q) 83 mm
(3 9/32q) 122 mm
(4 13/16q) 169 mm
(6 21/32q) 252 mm (9 29/32q) 319 mm (12 9/16q) 570 mm (22 7/16q) 770 mm (30 5/16q) Supplied accessories 1 Safety holder 1 Screw 2 Wall mount brackets Additionally required accessories
(commercially available) 4 Wall mount bracket fixing screws 1 Safety holder fixing screw 1 Fall prevention cord*
1 Screw eye
* Use a cord that is capable of supporting over 33 kg (72.8 lbs)
(with a diameter of about 1.5 mm (1/16q)). Keep the safety holder out of reach of children to prevent swallowing. Keep the screws out of reach of children to prevent swallowing. Keep the wall mount brackets out of reach of children to prevent swallowing. Safety precautions Professional installation is required. The installation should never be done by any other than a qualified installation specialist. PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING. Be sure to install this unit as indicated within this Owners Manual. 10 VQT4T91 SC-NE1_PPC~VQT4T91.book 11 2 Attach the wall mount bracket to the wall with 5 Hook the unit securely onto the wall mount 2 screws (not supplied). (Both sides) Use a level to ensure both wall mount brackets are level. At least 30 mm (1 3/16q) 4 mm
(5/32q) 7.5 mm (19/64q) to 9.4 mm (3/8q) Wall mount bracket 3 Fix the safety holder onto the unit with the screw (supplied).
{. Screw tightening torque: 50 N0cm (0.4 lbf0ft) to 70 N0cm (0.5 lbf0ft). Screw
(supplied) 4 Attach the fall prevention cord (not supplied) to this unit. Cord
(not supplied) brackets with both hands. Connect the AC power supply cord to the unit before hanging the unit onto the wall. (l 6) After hanging the unit, release your hands carefully to confirm the unit sits securely on the wall. Wall I H S L G N E 6 Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto the wall. Refer to step 2 for requirements before screwing. Safety holder Fixed to the wall Safety holder fixing screw
(not supplied) 7 Attach the fall prevention cord (not supplied) to the wall. Make sure that the slack of the cord is minimal. Screw eye (not supplied) Cord (not supplied) Wall 11 VQT4T91 SC-NE1_PPC~VQT4T91.book 12 Unit care Pull out the AC power plug from the outlet before maintenance. Clean this unit with a soft, dry cloth When dirt is heavy, wring a cloth moistened in water tightly to wipe the dirt, and then wipe it with a dry cloth. Never use alcohol, paint thinner or benzine to clean this unit. Before using chemically treated cloth, carefully read the instructions that came with the cloth. To dispose or transfer this unit The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings. (l 9, To return all settings to the factory preset) The operation history may be recorded in the memory of this unit. License The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. Specifications GENERAL Power consumption Power consumption in standby mode 11 W Approx. 0.1 W AC 120 V, 60 Hz Power supply Dimensions (WkHkD) 570 mmk206 mmk100 mm
(22 7/16qk8 1/8qk3 15/16q) Approx. 2.7 kg (5.95 lbs) Mass (Weight) Operating temperature range Operating humidity range 0 oC to r40 oC (r32 oF to r104 oF) 35 % to 80 % RH (no condensation) AMPLIFIER SECTION RMS Output Power Stereo mode Front Ch (both ch driven) 20 W per channel (6 ), 1 kHz, 10 % THD 40 W Total RMS Stereo mode power FTC Output Power Stereo mode Front Ch (both ch driven) Total FTC Stereo mode power 15 W per channel (6 ), 20 Hz to 20 kHz, 1 % THD 30 W 2 way, 2 speaker system (Bass reflex) SPEAKER SECTION Type Speaker unit(s) 1. Woofer 2. Tweeter Impedance Output sound pressure Frequency range 8 cm (3 1/8q)k1 per channel 2.5 cm (1q)k1 per channel 6 83.5 dB/W (1 m (3.3 ft)) 52 Hz to 25 kHz (s16 dB), 75 Hz to 22 kHz (s10 dB) BLUETOOTH SECTION Version Output Communication distance Communication method Correspondence profile
* Prospective communication distance Bluetooth Ver.2.1 +EDR Class 2 (2.5 mW) About 10 m (33 ft)*
2.4 GHz band FH-SS A2DP Measurement environment:
Temperature 25 oC (77 oF) / Height 1 m (3.3 ft) Measure in MODE 1 TERMINALS SECTION AUX Terminal Stereo, 3.5 mm (1/8q) jack
Specifications are subject to change without notice. Mass and dimensions are approximate. Total harmonic distortion is measured by a digital spectrum analyzer. 12 VQT4T91 SC-NE1_PPC~VQT4T91.book 13 Spanish Quick Reference / Referencia rpida en espaol Conexiones Operaciones Bluetooth Al usar la conexin Bluetooth, puede escuchar el sonido desde el dispositivo de audio Bluetooth desde este aparato, de forma inalmbrica. Consulte las instrucciones de funcionamiento del dispositivo Bluetooth para obtener ms detalles.
Conecte el cable de alimentacin de CA. Esta unidad consume poca corriente CA incluso cuando se encuentra apagada. Para ahorrar energa, si no va a usar esta unidad durante un perodo prolongado de tiempo, puede desconectarla. Consumo de energa en Standby (modo de espera):
Aprox. 0,1 W A la toma domstica de CA Cable de suministro de energa CA (suministrado) Conexin Adicional
Conecte un dispositivo externo de msica (para el modo AUX). 1 Enchufe el cable de audio (no suministrado) en el AUX conector. Tipo de enchufe: 3,5 mm (1/8q) estreo 2 Presione [
, AUX] topara seleccionar AUX y comenzar a reproducir en el dispositivo conectado. Desconecte el ecualizador o baje el volumen de sonido del dispositivo externo para reducir la seal de entrada. Un nivel alto de la seal de entrada distorsionar el sonido. Para mayores detalles, consulte el manual de instrucciones del otro equipo. No se proporcionan cables ni dispositivos. Cable de audio (no suministrado) Para seleccionar el nivel de entrada de sonido del dispositivo externo 1 Mientras est en modalidad AUX, pulse
[PLAY MENU] repetidamente para seleccionar INPUT LEVEL y luego pulse [OK]. 2 Presione [3, 4] para seleccionar NORMAL o HIGH. Dispositivos Bluetooth de sincronizacin Preparacin Encienda la funcin Bluetooth del dispositivo y coloque el dispositivo cerca de este aparato. Si este aparato ya est conectado a un dispositivo Bluetooth, desconctelo. 1 Pulse [
2 Presione [PLAY MENU] para seleccionar Si se indica PAIRING en la pantalla, vaya al paso 3.
, AUX] para seleccionar BLUETOOTH. NEW DEV. y luego presione [OK].
{. PAIRING se indica en la pantalla. del dispositivo Bluetooth. 3 Seleccione SC-NE1 desde el men Bluetooth 4 Inicie la reproduccin en el dispositivo Bluetooth.
Si se le solicita la contrasea, ingrese 0000. Puede registrar hasta 8 dispositivos con este aparato. Si se sincroniza un 9no dispositivo, se reemplazar el dispositivo que no se us por ms tiempo. Conexin de un dispositivo Bluetooth sincronizado Preparacin Encienda la funcin Bluetooth del dispositivo y coloque el dispositivo cerca de este aparato. Si este aparato ya est conectado a un dispositivo Bluetooth, desconctelo. 1 Pulse [
, AUX] para seleccionar BLUETOOTH. 2 Seleccione SC-NE1 desde el men Bluetooth
{. READY se indica en la pantalla. del dispositivo Bluetooth.
{. El nombre del dispositivo conectado se indica en la pantalla durante 2 segundos. 3 Inicie la reproduccin en el dispositivo Bluetooth.
Esta unidad se puede conectar solamente a un dispositivo por vez. Cuando se selecciona BLUETOOTH como fuente, este aparato intentar conectarse automticamente con el ltimo dispositivo conectado Bluetooth. El dispositivo Bluetooth se desconectar si se selecciona AUX como fuente de audio. Desconexin del dispositivo Bluetooth 1 Mientras se conecta un dispositivo Bluetooth:
Pulse [PLAY MENU] para seleccionar DISCONNECT?. 2 Presione [3, 4] para seleccionar OK? YES y luego presione [OK]. I H S L G N E L O A P S E 13 VQT4T91 SC-NE1_PPC~VQT4T91.book 14 Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO) Panasonic Consumer Marketing Company of North America, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Products Limited Warranty Limited Warranty Coverage
(For USA and Puerto Rico Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Marketing Company of North America
(referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor. Product or Part Name Wireless Speaker System All included Accessories
(Except Non-Rechargeable Batteries) Only Non-Rechargeable Batteries Parts 1 Year 90 Days 10 Days Labor 1 Year Not Applicable Not Applicable During the Labor warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold as is. Mail-In Service For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship the product prepaid to:
Panasonic Exchange Center 4900 George McVay Drive Suite B McAllen, TX 78503 panacare@us.panasonic.com Online Repair Request To submit a new repair request and for quick repair status visit our Web Site at www.panasonic.com/repair. When shipping the unit, carefully pack, include all supplied accessories listed in the Owners Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at www.panasonic.com/BatteryHandling as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty. IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/
PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantors Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/help or, contact us via the web at:
http://www.panasonic.com/contactinfo You may also contact us directly at:
1-800-211-PANA (7262) Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST For hearing or speech impaired TTY users, TTY: 1-877-833-8855 Accessory Purchases (United States and Puerto Rico) Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com Or, send your request by E-mail to:
npcparts@us.panasonic.com You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST) Panasonic National Parts Center 20421 84th Ave S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express) For hearing or speech impaired TTY users, TTY: 1-866-605-1277 As of October 2012 The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. MODEL NUMBER SERIAL NUMBER SC-NE1 14 User memo:
DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER VQT4T91 SC-NE1_PPC~VQT4T91.book 15 Limited Warranty (ONLY FOR CANADA) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT - LIMITED WARRANTY EXCHANGE PROGRAM Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc. I H S L G N E Panasonic Portable / Clock Radio (without Tape, CD, MD) Panasonic Audio Product Panasonic DVD Product Accessories including rechargeable batteries One (1) year One (1) year One (1) year Ninety (90) days This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold as is, and which product was delivered to you in new condition in the original packaging. IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED LIMITATIONS AND EXCLUSIONS This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are also excluded from coverage under this warranty. THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for illustration only.) In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory. CONTACT INFORMATION For product information and operation assistance, please contact:
Our Customer Care Centre:
Telephone #:
Fax #:
Email link:
1-800-561-5505
(905) 238-2360 Support # contact us # email on www.panasonic.ca For defective product exchange within the warranty period, please contact the original dealer or our Customer Care Centre. 15 VQT4T91 SC-NE1_PPC~VQT4T91.book 16 THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any unauthorized changes or modifications to this equipment would void the users authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party:
Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support Contact:
Panasonic Consumer Marketing Company of North America Telephone No.: 1-800-211-PANA (7262) THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of this device. FCC ID: ACJ-SC-NE1 IC: 216A-SCNE1 This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm (7 7/8q) or more away from persons body (excluding extremities: hands, wrists, feet and ankles). Panasonic Consumer Marketing Company of North America, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 http://www.panasonic.com C Panasonic Corporation 2012 Printed in Malaysia Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 www.panasonic.ca pr VQT4T91 F1212BM0
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-01-10 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2013-01-10
|
||||
1 | Applicant's complete, legal business name |
Panasonic Corporation of North America
|
||||
1 | FCC Registration Number (FRN) |
0003762242
|
||||
1 | Physical Address |
Two Riverfront Plaza, 9th Floor
|
||||
1 |
Newark, NJ
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
e******@ul.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
ACJ
|
||||
1 | Equipment Product Code |
SC-NE1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
B******** B******
|
||||
1 | Title |
Project Manager
|
||||
1 | Telephone Number |
201-3********
|
||||
1 | Fax Number |
201-3********
|
||||
1 |
B******@us.panasonic.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
UL Japan, Inc.
|
||||
1 | Name |
T******** H********
|
||||
1 | Physical Address |
4383-326 Asama-cho, Ise-shi
|
||||
1 |
Mie-ken, 516-0021
|
|||||
1 |
Japan
|
|||||
1 | Telephone Number |
81-59********
|
||||
1 | Fax Number |
81-59********
|
||||
1 |
T******@ul.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/24/2013 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Speaker System | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is Conducted. End-users must be provided with specific operating instructions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UL Japan, Inc. Head office EMC Lab.
|
||||
1 | Name |
T**** H******
|
||||
1 | Telephone Number |
+81-5********
|
||||
1 | Fax Number |
+81-5********
|
||||
1 |
T******@jp.ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0019000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC