happy holidays!

FCC ID: ACJ9TGWL15A WLAN Module

by: Panasonic Corporation of North America latest update: 2016-06-05 model: 9TGWL15A

Seventeen grants have been issued under this FCC ID from 10/24/2015 to 06/05/2016 (this is one of ninety-six releases in 2016 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked troubleshooting guides, warrantee terms, password defaults, instructions, & drivers.
permalink for this FCC identifier
|
|
|   
eg for Slack usage
app s submitted / available
various User Manual of Wireless Communiation Users Manual pdf 305.17 KiB May 11 2015
various User Manual 20160427 v1 - User Manual Host FZ-G1 Users Manual pdf 1.17 MiB / March 07 2016
various User Manual 20160427 v1 - User Manual Users Manual pdf 46.62 KiB / March 07 2016
various User manual Users Manual pdf 1.62 MiB May 06 2016
various Cover Letter(s) pdf May 06 2016
various Cover Letter(s) pdf May 06 2016
various Cover Letter(s) pdf May 06 2016
various Test Report pdf May 06 2016
various Test Setup Photos pdf May 06 2016
various Test Setup Photos pdf May 06 2016
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Attestation Statements pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various ID Label/Location Info pdf
various External Photos pdf / March 07 2016
various External Photos pdf / March 07 2016
various ID Label/Location Info pdf
various RF Exposure Info pdf
various Internal Photos pdf / March 07 2016
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf / March 07 2016
various ID Label/Location Info pdf
various Test Setup Photos pdf / March 07 2016
various Test Report pdf
various Cover Letter(s) pdf March 03 2016
various Cover Letter(s) pdf
various External Photos pdf
various Internal Photos pdf
various ID Label/Location Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf May 11 2015 / October 11 2015
various RF Exposure Info pdf May 11 2015 / October 11 2015
various RF Exposure Info pdf May 11 2015 / October 11 2015
various RF Exposure Info pdf May 11 2015 / October 11 2015
various RF Exposure Info pdf May 11 2015 / October 11 2015
various RF Exposure Info pdf May 11 2015 / October 11 2015
various RF Exposure Info pdf May 11 2015 / October 11 2015
various RF Exposure Info pdf May 11 2015 / October 11 2015
various RF Exposure Info pdf May 11 2015 / October 11 2015
various RF Exposure Info pdf May 11 2015 / October 11 2015
various RF Exposure Info pdf May 11 2015 / October 11 2015
various Cover Letter(s) pdf May 11 2015 / October 11 2015
various Attestation Statements pdf May 11 2015 / October 11 2015
various External Photos pdf May 11 2015
various ID Label/Location Info pdf May 11 2015 / October 11 2015
various Internal Photos pdf May 11 2015
various External Photos pdf May 11 2015 / October 11 2015
various External Photos pdf May 11 2015
various ID Label/Location Info pdf May 11 2015 / October 11 2015
various RF Exposure Info pdf May 11 2015 / October 11 2015
various Test Setup Photos pdf May 11 2015
various External Photos pdf May 11 2015
various Cover Letter(s) pdf May 11 2015 / October 11 2015
various Cover Letter(s) pdf May 11 2015 / October 11 2015
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various ID Label/Location Info pdf
various Cover Letter(s) pdf
various User Manual of Wireless Communiation Users Manual pdf 305.17 KiB May 11 2015
various User Manual 20160427 v1 - User Manual Host FZ-G1 Users Manual pdf 1.17 MiB / March 07 2016
various User Manual 20160427 v1 - User Manual Users Manual pdf 46.62 KiB / March 07 2016
various User manual Users Manual pdf 1.62 MiB May 06 2016

frequency equipment class purpose
1 2016-06-05 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
2 2412 ~ 2472 DTS - Digital Transmission System
3 2016-05-19 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
4 2422 ~ 2462 DTS - Digital Transmission System
5 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
6 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
7 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
8 2016-02-25 5745 ~ 5825 DTS - Digital Transmission System
9 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
10 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
11 2015-11-10 5775 ~ 5775 DTS - Digital Transmission System
12 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
13 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
14 2015-10-24 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX Change in identification of presently authorized equipment. Original FCC ID: PD98260NG Grant Date: 08/13/2015
15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
16 5775 ~ 5775 DTS - Digital Transmission System
17 JBP - Part 15 Class B Computing Device Peripheral Change in identification of presently authorized equipment. Original FCC ID: PD98260NG Grant Date: 05/27/2015

Application Forms

app s Applicant Information
various Effective 2016-06-05
various 2016-05-19
various 2016-02-25
various 2015-11-10
various 2015-10-24
various Applicant's complete, legal business name Panasonic Corporation of North America
various FCC Registration Number (FRN) 0003762242
various Physical Address Two Riverfront Plaza, 9th Floor
various Newark, New Jersey 07102-5490
various United States
app s TCB Information
various TCB Application Email Address t******@siemic.com
various L******@ul.com
various L******@ul.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code ACJ
various Equipment Product Code 9TGWL15A
app s Person at the applicant's address to receive grant or for contact
various Name B******** B******
various Title Project Manager
various Telephone Number 201-3********
various Fax Number 201-3********
various E-mail B******@us.panasonic.com
app s Technical Contact
various Firm Name UL Japan, Inc.
various Name T**** H******
various Physical Address 4383-326 Asama-cho, Ise-shi
various Mie-ken, 516-0021
various Japan
various Telephone Number 81-59******** Extension:
various 81-59********
various Fax Number 81-59********
various E-mail T******@ul.com
app s Non Technical Contact
various Firm Name UL Japan, Inc.
various Name T**** H****
various Physical Address 4383-326 Asama-cho, Ise-shi
various Mie-ken, 516-0021
various Japan
various Telephone Number 81-59********
various Fax Number 81-59********
various E-mail T******@ul.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)07/20/2016
various06/20/2016
various07/03/2016
various08/24/2016
various12/24/2015
various12/08/2015
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)WLAN Module
variousWireless Network Adaptor
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II permissive change or modification of presently authorized equipment
variousChange in identification of presently authorized equipment. Original FCC ID: PD98260NG Grant Date: 08/13/2015
variousChange in identification of presently authorized equipment. Original FCC ID: PD98260NG Grant Date: 05/27/2015
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsCIIPC to update from old to new NII rule. CIIPC to add host Panasonic Personal Computer model CF-54. The highest reported SAR value is 0.34W/kg. Original Grant Comments on 08/13/2013 were: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
variousCIIPC to update from old to new NII rule. CIIPC to add host Panasonic Personal Computer model CF-54. The highest reported SAR value is 0.14W/kg Original Grant Comments on 08/13/2013 were: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.78W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
variousClass II permissive change to approve U-NII Band 3 according to new rules with module installed in previously granted host Panasonic CF-20 tablet PC. Power Output listed is conducted. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values 1.07 W/kg and 0.61 W/kg respectively. The highest reported SAR values across all filings under this FCC ID for standalone and simultaneous SAR are are 0.79W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB616217 D04 for Laptop and Tablets v01r02.
variousClass II permissive change to allow configuration in portable tablet host Model FZ-G1. Power Output listed is conducted. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values for this filing for standalone and simultaneous SAR are are 0.71 W/kg and 1.28 W/kg respectively. The highest reported SAR values across all filings under this FCC ID for standalone and simultaneous SAR are are 0.79W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB616217 D04 for Laptop and Tablets v01r02.
variousClass II permissive change allow configuration in portable tablet host Model FZ-G1. Power Output listed is conducted. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR values for standalone and simultaneous SAR in this filing are: <0.1W/kg and 1.28 W/kg respectively. The highest reported SAR values across all filings under this FCC ID for standalone and simultaneous SAR are <0.1 W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB616217 D04 for Laptop and Tablets v01r02.
variousClass II permissive change to allow configuration in portable tablet host Model FZ-G1. Power Output listed is conducted. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR value for this filing for standalone and simultaneous SAR are are 0.53 W/kg and 1.28 W/kg respectively. The highest reported SAR values across all filings under this FCC ID for standalone and simultaneous SAR are are 0.79W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB616217 D04 for Laptop and Tablets v01r02.
variousClass II permissive change to approve standalone module U-NII Band 3 according to new rules. Original Grant Comments on 08/13/2013 were: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB616217 D04 for Laptop and Tablets v01r02. The highest reported SAR values across all filings under this FCC ID for standalone and simultaneous SAR are are 0.79W/kg and 1.53W/kg respectively.
variousCIIPC to add host Panasonic Personal Computer model CF-54. The highest reported SAR value is 0.14W/kg Original Grant Comments on 08/13/2013 were: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.78W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
variousCIIPC to add host Panasonic Personal Computer model CF-54. Original Grant Comments on 08/13/2013 were: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
variousCIIPC to add host Panasonic Personal Computer model CF-54. The highest reported SAR value is 0.34W/kg. Original Grant Comments on 08/13/2013 were: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
variousClass II permissive change to alternate Panasonic CF-20 table PC as described. The highest reported SAR value under this filing is 0.80 W/Kg. Original Grant Comments on 08/13/2013 were: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.78W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D4 for Laptop and Tablets v01. The highest reported SAR value across all filings under this FCC ID is 0.80 W/kg.
variousClass II permissive change to alternate Panasonic CF-20 table PC as described. The highest reported SAR value under this filing is 1.07 W/Kg. Original Grant Comments on 08/13/2013 were: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01. The highest reported SAR value across all filings under this FCC ID is 1.07 W/kg.
variousClass II permissive change to alternate Panasonic CF-20 table PC as described. Original Grant Comments on 08/13/2013 were: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
variousOriginal Grant Comments on 08/13/2013 were: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
variousOriginal Grant Comments on 08/13/2013 were: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
variousOriginal Grant Comments on 08/13/2013 were: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.78W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name UL Verification Services Inc. (formerly UL CCS)
various UL Japan, Inc. Head office EMC Lab.
various UL Japan, Inc
various Name M****** M********
various T**** H****
various M******** F****
various Telephone Number 919 5********
various +81-5********
various 81-59********
various Fax Number 000-0********
various +81-5********
various 81-59********
various E-mail m******@ul.com
various T******@jp.ul.com
various m******@jp.ul.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E 38 CC MO 5180 5240 0.0873
1 2 15E 38 CC MO ND 5260 5320 0.1413
1 3 15E 38 CC MO ND 5500 5720 0.1542
1 4 15E 38 CC MO 5745 5825 0.0968
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.01
2 2 15C CC MO 2412 2472 0.3532
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E 38 CC MO 5180 5240 0.1462
3 2 15E 38 CC MO 5190 5230 0.1343
3 3 15E 38 CC MO 5210 5210 0.113
3 4 15E 38 CC MO ND 5260 5320 0.1387
3 5 15E 38 CC MO ND 5270 5310 0.1413
3 6 15E 38 CC MO ND 5290 5290 0.0483
3 7 15E 38 CC MO ND 5500 5700 0.1393
3 8 15E 38 CC MO ND 5510 5670 0.1419
3 9 15E 38 CC MO ND 5530 5690 0.1542
3 1 15E 38 CC MO ND 5710 5710 0.151
3 11 15E 38 CC MO ND 5720 5720 0.1531
3 12 15E 38 CC MO 5745 5825 0.044
3 13 15E 38 CC MO 5755 5795 0.0504
3 14 15E 38 CC MO 5775 5775 0.055
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC MO 2412 2472 0.3532
4 2 15C CC MO 2422 2462 0.1503
4 3 15C CC 2402 2480 0.01
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E 38 CC MO 5180 5240 0.1462
6 2 15E 38 CC MO 5190 5230 0.1343
6 3 15E 38 CC MO 5210 5210 0.113
6 4 15E 38 CC MO ND 5260 5320 0.1387
6 5 15E 38 CC MO ND 5270 5310 0.1413
6 6 15E 38 CC MO ND 5290 5290 0.0483
6 7 15E 38 CC MO ND 5500 5700 0.1393
6 8 15E 38 CC MO ND 5510 5670 0.1419
6 9 15E 38 CC MO ND 5530 5690 0.1542
6 1 15E 38 CC MO ND 5710 5710 0.151
6 11 15E 38 CC MO ND 5720 5720 0.1531
6 12 15E 38 CC MO 5745 5825 0.044
6 13 15E 38 CC MO 5755 5795 0.0504
6 14 15E 38 CC MO 5775 5775 0.055
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E 38 CC MO 5180 5240 0.1462
7 2 15E 38 CC MO 5190 5230 0.1343
7 3 15E 38 CC MO 5210 5210 0.113
7 4 15E 38 CC MO ND 5260 5320 0.1387
7 5 15E 38 CC MO ND 5270 5310 0.1413
7 6 15E 38 CC MO ND 5290 5290 0.0483
7 7 15E 38 CC MO ND 5500 5700 0.1393
7 8 15E 38 CC MO ND 5510 5670 0.1419
7 9 15E 38 CC MO ND 5530 5690 0.1542
7 1 15E 38 CC MO ND 5710 5710 0.151
7 11 15E 38 CC MO ND 5720 5720 0.1531
7 12 15E 38 CC MO 5745 5825 0.044
7 13 15E 38 CC MO 5755 5795 0.0504
7 14 15E 38 CC MO 5775 5775 0.055
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402 2480 0.01
8 2 15C CC MO 2412 2472 0.3532
8 3 15C CC MO 5745 5825 0.3776
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E CC MO 5180 5240 0.1462
10 2 15E CC MO ND 5260 5320 0.1413
10 3 15E CC MO ND 5500 5720 0.1542
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402 2480 0.01
11 2 15C CC MO 2412 2472 0.3532
11 3 15C CC MO 2422 2462 0.1503
11 4 15C CC MO 5745 5825 0.3776
11 5 15C CC MO 5755 5795 0.3373
11 6 15C CC MO 5775 5775 0.1318
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E 39 CC MO 5180 5240 0.1462
12 2 15E 39 CC MO 5190 5230 0.1343
12 3 15E 39 CC MO 5210 5210 0.113
12 4 15E 39 CC MO ND 5260 5320 0.1387
12 5 15E 39 CC MO ND 5270 5310 0.1413
12 6 15E 39 CC MO ND 5290 5290 0.0483
12 7 15E 39 CC MO ND 5500 5700 0.1393
12 8 15E 39 CC MO ND 5510 5670 0.1419
12 9 15E 39 CC MO ND 5530 5690 0.1542
12 1 15E 39 CC MO ND 5710 5710 0.151
12 11 15E 39 CC MO ND 5720 5720 0.1531
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E CC MO 5180 5240 0.1462
14 2 15E CC MO 5190 5230 0.1343
14 3 15E CC MO 5210 5210 0.113
14 4 15E CC MO ND 5260 5320 0.1387
14 5 15E CC MO ND 5270 5310 0.1413
14 6 15E CC MO ND 5290 5290 0.0483
14 7 15E CC MO ND 5500 5700 0.1393
14 8 15E CC MO ND 5510 5670 0.1419
14 9 15E CC MO ND 5530 5690 0.1542
14 1 15E CC MO ND 5710 5710 0.151
14 11 15E CC MO ND 5720 5720 0.1531
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402 2480 0.01
16 2 15C CC MO 2412 2472 0.3532
16 3 15C CC MO 2422 2462 0.1503
16 4 15C CC MO 5745 5825 0.3776
16 5 15C CC MO 5755 5795 0.3373
16 6 15C CC MO 5775 5775 0.1318
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15B

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC