FCC ID: V5PM50 Mobile Payment Cell Phone

1. Contents Checklist

Please check the components after unpacking. If any are missing, please contact the

dealer.

Name

M50 Mobile Payment Terminal

AC Power Adapter (optional)

USB Cable

Mobile phone Card Pick-up Needle

Product Manual

2. Product Description

Denoise MIC

Qty.

1

1

1

1

1

Rear-Camera

Flash Light

1.54 inch LCD

NFC Reading area

Touch Keypad

Bottom View

Speaker

Front Camera

Proximity Seneor

Main-MIC

Type-C

Receiver

Volume +

Volume -

Power Button

SIM/microSD

Card-Slot

Touch

Screen

IC Card-Slot

Fingerprint

Audio-Jack

TOP View

3. Installation

TYPE_C port: Connect USB device or PC.

SIM card:

TYPE-C

○1 Take the Card Pick-up Needle out of the box;

○2 Insert the Card Pick-up Needle into the SIM card slot;

○3 Insert SIM card into the pop-up card-slot.

microSD card:

○1 Take the Card Pick-up Needle out of the box;

○2 Insert the Card Pick-up Needle into the microSD card slot;

○3 Insert microSD card into the pop-up card-slot.

Nano SIM

Nano SIM

OR

microSD

4. Instructions

1） Power ON/OFF

Power on: press and hold the Power button for five seconds until the LCD besides, and

then the terminal is being turned on.

Power off: press and hold the Power button for three seconds until the shutdown menu

appears, tap Shutdown > Click Shutdown, and then “Shutting…” appears, the

terminal is being turned off.

2）IC card

Place the chip face up, insert the IC card into the IC card slot, and push it to the end.

3）Swiping contactless card

Place a contactless card close to the sensor area of swiping which is at the back of the

terminal.

5. Installation and Usage Tips

1）Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty

environment.

2）Forbid non-professional to repair the terminal.

3）Before insert the card, please check internal and around of IC card slot. When you

found some suspicious objects, must report to related administrator.

Working Environment： Temperature: -10℃~50℃(32℉~122℉)

Storage Environment： Temperature: -20℃~70℃(-4℉~158℉)

R.H.:5%~96%(non-condense)

R.H.:5%~95%(non-condense)

6. Lithium Ion Polymer Battery Usage Tips

WARNING:

1）Don't use the terminal in sunlight or smoke, dust environment.

2）Prohibited to strike, squeeze and tread on battery or throw it into the liquid and fire.

3）If battery is impressive, deformed, damaged or exothermic seriously, please stop

using immediately and replace it!

4）The battery replacement shall be done only by either cells supplier or device supplier

and never be done by the user!

5）Must use the specified battery model and charger, otherwise there will be explosion

6）Charging time can not exceed 24 hours. If the battery is out of power, please recharge

in time. Avoid damaging the battery in over-charge and over-discharge.

7）If be non-use for long time, please recharge the battery per 6 months to avoid

shortening its life.

8）Suggest to replace it when the battery have been used for 2 years.

7. Icon shows

Do not throw away, need professional recycling.

Class II Equipment

For indoor use only

Energy Efficiency Marking

AC voltage

DC voltage

Trademark notice:

“microSD logo is a trademark of SD-3C LLC.”

The full text of the EU declaration of conformity is available at the following internet address:

https://www.pax.com.cn/ProductCE/index.aspx

E-Label

This device has E-Lable, Steps to access the e-label is Setting—About phone---Regulatory labels.

FCC compliance statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

FCC SAR statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user

must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be

co-located or operating in conjunction with any other antenna or transmitter.

The portable device is designed to meet the requirements for exposure to radio waves established by the Federal

Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of

tissue. The highest SAR value reported under this standard during product certification for use when properly

worn on the body

This equipment should be installed and operated with minimum distance 10mm between the radiator and your body.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable

exposure condition without restriction.

While there may be differences between the SAR levels of various devices and at various positions, they all meet

the government requirement.

ISED compliance statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and

Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

device.

(2) This device must accept any interference, including interference that may cause undesired operation of the

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,

Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes :

(1) L’appareil ne doit pas produire de brouillage;

(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en

The user manual for LE-LAN devices shall contain instructions related to the restrictions mentioned in the above

compromettre le fonctionnement.

sections, namely that:

i.

ii.

i.

ii.

indicated.

indiquée.

the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for

harmful interference to co-channel mobile satellite systems;

where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain

compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly

le dispositif utilisé dans la bande 5150-5250 MHz est réservé à une utilisation en intérieur afin de

réduire le risque de brouillage préjudiciable aux systèmes mobiles par satellite dans le même canal;

èle (s) d'antenne et l'angle (s) d'inclinaison le plus défavorable nécessaire (s) pour rester conforme (e)

au p.e. L'exigence relative au masque d'élévation énoncée à la section 6.2.2.3 doit être clairement

IC SAR statement

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user

must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not

be co-located or operating in conjunction with any other antenna or transmitter.

The portable device is designed to meet the requirements for exposure to radio waves established by the ISED.

These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value

reported under this standard during product certification for use when properly worn on the body.

This equipment should be installed and operated with minimum distance 10mm between the radiator and your

body.

corps.

Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies pour un environnement

non contrôlé. L’utilisateur final doit suivre les instructions spécifiques pour satisfaire les normes. Cet émetteur ne

doit pas être co-implanté ou fonctionner en conjonction avec toute autre antenne ou transmetteur.

Le dispositif portatif est conçu pour répondre aux exigences d’exposition aux ondes radio établie par le

développement énergétique DURABLE. Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de

tissu. La valeur SAR la plus élevée signalée en vertu de cette norme lors de la certification de produit à utiliser

lorsqu’il est correctement porté sur le corps.

Cet équipement doit être installé et utilisé avec une distance minimale de 10 mm entre le radiateur et votre

PSU Model: M50. US. FCC ID: VSPM50 FE FCC 15.19a(3) statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation, Canada IC: 11689A-m50 ca

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name PAX Technology Limited Address Grantee Code FCC ID Authorized Contact Name Contact Email Contact Phone Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Hong Kong V5P V5PM50 Jenna Tan certservice@paxsz.com 86-755-86156663 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the A FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. nse, provide a production sample of the requested product to SGS, f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.20 r these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date:

2021-09-26 Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Jenna Tan Certification Leader Applicant Declaration Rev:0.0

PAX Technology Limited Request for Class II Permissive Change FCC ID V5PM50 Date 2021-09-26 TO Federal Communication Commission Please be notified that we this Class II permissive change are as below the undersigned PAX Technology Limited declare that the reasons for Describe the difference between the product in original ID and current one The middle frame changed from rounded corners to right angles, the Power key and volume key position exchanged, and the material of battery cover changed from plastic to glass. PCB without change and identical. Thank you. Sincerely. Print Name: Jenna Tan Title: Certification Leader Signature:

On behalf of Company: PAX Technology Limited Telephone: 86-755-86156663 E-mail: certservice@paxsz.com

PAX Technology Limited Date: 2021-09-26 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: V5PM50 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with PAX Technology Limited. This authorization is valid until further written notice from the applicant. Print Name: Jenna Tan Title: Certification Leader Signature:

On behalf of Company: PAX Technology Limited Telephone: 86-755-86156663 E-mail: certservice@paxsz.com

PAX Technology Limited TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding:

Confidentiality Request regarding application for FCC ID: V5PM50 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Schematic(s) Block Diagrams Operational Descriptions BOM List Tune Up Procedure Software Security Description External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Signature:

On behalf of Company: PAX Technology Limited Telephone: 86-755-86156663 E-mail: certservice@paxsz.com Print Name: Jenna Tan Title: Certification Leader

PAX Technology Limited We, PAX Technology Limited declare that this EUT (FCC ID: V5PM50) doesnt have ad Hoc Mode function on US/Canada frequencies. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US/ Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, Please have my best attention. Sincerely yours, Signature:

Print Name: Jenna Tan Title: Certification leader On behalf of Company: PAX Technology Limited Telephone: 86-755-86156663 E-mail: certservice@paxsz.com