A920MAX Smart Mobile Payment Terminal Quick Setup Guide PAX Technology Limited 1 1. Checklist Congratulations on receiving your PAX Technology payment terminal. We do hope you enjoy it! The box you have just opened should contain the following items:
1 x PAX A920MAX Smart Mobile Payment Terminal 1 x Thermal Paper Roll 1 x AC Power Adapter 1 x Battery 1 x Cable Please use the original accessories including the USB cable, power adapter and battery. 2. Product Description Contactless Card ReaderScan ButtonVolume+Volume-Magstripe Card Reader Power ButtonLCD DisplaySmart Card Reader 3. Installation 2 ScannerSAM 1 Card SlotSIM 2/SAM 2 Card SlotSIM 1 Card SlotmicroSD Card Slot USB Port: connect to a USB-enabled device. SAM/SIM/microSD Cards:
a) Open the battery cover underneath the terminal;
b) Remove the battery;
c) Insert SAM/SIM/microSD cards into the corresponding card slots. 4. Instructions Power On/OffPower On: press and hold the Power button for 5 seconds until the LCD lights on, showing that the terminal is being turned on. Power Off: press and hold the Power button for 3 seconds until the shutdown menu appears, tap Power Off > Click Power Off, and Shutting Down will appear. Contactless TransactionsTap a contactless enabled card or smartphone in proximity to the top end of the terminal where the contactless sensor is located, indicated by the contactless icon. Chip Card TransactionsWith the card's chip facing upwards, insert the chip card fully into the chip card slot. Magnetic Stripe TransactionsWith the card's magnetic stripe facing downwards, swipe the card through the magnetic reader at a constant speed, in either direction. Paper ReceiptsTear off the receipt at a 45-degree angle to the paper cutter. Battery ChargingWith a charging cable connected, the device's charging status shows on the display. 5. General Usage Tips 3 Avoid placing this product in direct sunlight for extended periods, nor in environments with excessively high temperature, moisture or dust. Only qualified personnel should repair this product. Before using cards in the chip & magstripe readers, please ensure they are free from any foreign objects. 6. Important Safety Warning Do not place the terminal or battery in direct sunlight, nor in environments with excessively high temperatures, smoke, dust, or dampness. Do not attempt to disassemble the battery, nor insert or use foreign objects to penetrate the casing. Never place the battery in a fire or excessively hot surfaces. Take care not to drop the battery. Excessive external shocks or pressure could cause battery liquid leakage or result in the battery catching fire or even exploding. Keep the battery well away from children and animals. Immediately replace any battery which appears to be deformed, expanded or in an overheated state. We recommend you only use power adaptors supplied by PAX Technology. If you must use 3rd party supplier accessories, please ensure specifications meet exactly those recommended for our products, which must comply with international and local regulations
& standards. Non-compatible power supplies, chargers or batteries could cause fires or even explosions, and will invalidate any product warranty. Charge the battery when the indicator level is low, but make sure to never charge a battery continuously for more than 24 hours. If a battery is not used for a long time, please charge it at least once every 6 months to avoid overcharge or discharge damage. For long-term optimal product performance, it is recommended that a battery be replaced after 2 years of continual usage. When disposing of the device, battery, or accessories, please do so responsibly and according to local regulations. These are not household waste items. Improper disposal of the battery could cause a fire or explosion, and any liquid leakage could be damaging to the environment and toxic to humans & animals. 7. Environmental Parameters Working Environment:
Temperature: 045 (32113) Storage Environment:
Temperature: -20~70(-4~158) (non-charging) Humidity:5%~95% (non-condensing) 8. Icons Dispose in a professional recycling manner Class II equipment 4 For indoor use only Energy efficiency marking AC voltage DC voltage microSD logo Trademark notice:
microSD logo is a trademark of SD-3C LLC. FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. ISED compliance statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
5
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The user manual for LE-LAN devices shall contain instructions related to the restrictions mentioned in the above sections, namely that:
the device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
le dispositif utilis dans la bande 5150-5250 MHz est rserv une utilisation en intrieur afin de rduire le risque de brouillage prjudiciable aux systmes mobiles par satellite dans le mme canal;
FCC SAR statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 4W/kg averaged over ten grams of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the limbs. IC SAR statement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 4W/kg averaged over ten grams of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the limbs. Cet quipement est conforme aux limites dexposition aux rayonnements ISED tablies pour un environnement non contrl. Lutilisateur final doit suivre les instructions spcifiques pour satisfaire les normes. Cet metteur ne doit pas tre co-implant ou fonctionner en conjonction avec toute autre antenne ou transmetteur. Les appareils portables sont conus pour rpondre aux exigences d'exposition aux ondes radio tablies par ISDE. Ces exigences fixent une limite SAR de 4 W / kg en moyenne pour un tissu de 10 grammes. La valeur SAR la plus leve rapporte conformment cette norme lors de la certification du produit lorsqu'il est port correctement sur les membres. 6 PAX continually invests to maintain its high quality products up to date with the latest certifications, therefore a comprehensive list can be requested via the website's contact form or on downloadable product brochures. PAX TECHNOLOGY LIMITED Manufacturer: PAX Computer Technology (Shenzhen) Co.,Ltd. Address:4/F, No.3 Building, Software Park, Second Central Science-Tech Road, High-Tech Industrial Park, Shenzhen, Guangdong, P.R.C. Tel: 0755-86169630 Website: http://www.pax.com.cn Responsible Party:PAX Technology, Inc. 8880 Freedom Crossing Trail, Building 400, 3rd Floor Suite 300, Jacksonville , Florida, 32256 Help-desk 1 877-859-0099 Fax: 0755-86169634 7