all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 3.03 MiB | May 11 2009 | |||
1 | Attestation Statements | May 11 2009 | ||||||
1 | Cover Letter(s) | May 11 2009 | ||||||
1 | External Photos | May 11 2009 | ||||||
1 | ID Label/Location Info | May 11 2009 | ||||||
1 | Internal Photos | May 11 2009 | ||||||
1 | RF Exposure Info | May 11 2009 | ||||||
1 | Cover Letter(s) | May 11 2009 | ||||||
1 | Test Report | May 11 2009 | ||||||
1 | Test Setup Photos | May 11 2009 |
1 | Users Manual | Users Manual | 3.03 MiB | May 11 2009 |
1 t r a t S k c u Q i Savi Office WO200 Professional Wireless Headset System
(WO1 Base + WH210 Headset) Quick Start Guide Guide de dmarrage rapide Gua de inicio rpido Guia de Incio Rpido 2-1 2-3 2-2 3-2 4 3-1 5-6 6-4 Savi WO1 Base 11 10 Welcome Telephone Interface Cable Congratulations on purchasing your new Plantronics product. This Quick Start Guide contains instructions for setting up the Savi Office WO200 Professional Wireless Headset System. Please refer to the separate safety instructions for important product safety information prior to installation or use of the product. 1 2 3 5 4 Base Power Supply 9 8 6 7 5-2 5-7 5-2 6-6 5-2 6-5 1. Desk Phone Speaking Volume 2. Configuration Switch 3. Desk Phone Listening Volume 4. Subscription Button and Indicator Light 5. Power/Charging Indicator Light 6. Power Jack 7. Handset Lifter Jack 8. Telephone Interface Cable Jack 9. USB Port 10. Desk Phone Talk Button and Indicator Light 11. PC Talk Button and Indicator Light Savi WH210 Headset USB Cable CD includes:
PerSono Suite Software Animated Setup Guide Complete User Guide We highly recommend that you refer to the CD for Animated Set Up instructions and the complete User Guide. System Requirements The minimum system requirements for Savi Office are as follows:
Supported Operating Systems: Windows XP, Windows Vista Processor: 400 MHz Pentium processor or equivalent (Minimum); 1GHz Pentium processor or equivalent (Recommended) RAM: 96 MB (Minimum); 256 MB (Recommended) Hard Disk: 280 MB (Minimum); 500 MB (Recommended) Display: 800 x 600, 256 colours (Minimum); 1024 x 768 high colour, 32-bit (Recommended) Internet Explorer V6 or better must be on the users system (Required) 7-1 7-2 1 5 3 4 2 6 1. Listening Volume (also controls mute and switching functions) 2. Call Control Button 3. Indicator Light 4. Noise-Canceling Boom 5. Ear tips 6. Charge Cradle Safety Instructions Do not use headphones / headsets at high volumes for an extended period of time. Doing so can cause hearing loss. Always listen at moderate levels. See www.plantronics.com/
healthandsafety for more information on headsets and hearing. Setting Up the Savi Office WO200 System 1. Attaching Charge Cradle to Base Connect the headset charge cradle to the base. Push firmly on the cradle until the cradle snaps into place. 2. Connecting Base to Desk Phone 2-1. Connect the telephone interface cable to the telephone interface cable jack on the base. 2-2. After disconnecting the handset coil cord from the desk phone, connect the telephone 2-3. Connect the handset coil cord to the telephone interface cable junction box. interface cable to the now open handset port on the desk phone. 3. Connecting Power Supply to Base 3-1. Connect the base power supply into the power jack on the base. 3-2. Connect the power supply to outlet. 4. Docking and Charging Headset and continue with Step 6. Making a Test Call with Desk Phone. If the dial tone is too loud or too soft, adjust the headset volume level. If the dial tone still does not sound clear, adjust the configuration switch until the dial tone sounds the best. 5-5. Listen for a dial tone. If the dial tone sounds clear, press the call control button on headset 5-6. 5-7. nOte Multiple settings might work with your phone; however, only one is the optimal position. 5-8. Press the call control button on the headset and return the handset to the cradle to complete configuration. 6. Making a test Call with Desk Phone 6-1. With your headset on, press the call control button on headset. 6-2. Remove the handset from desk phone cradle. 6-3. Dial the number using your desk phone. 6-4. 6-5. 6-6. 6-7. Press the call control button on the headset and return the handset to the cradle to If needed, adjust the listening volume on the headset. If the listening volume is still too loud or too soft, adjust the desk phone listening volume on the base. If the speaking volume is too loud or too soft for your listener, adjust the desk phone speaking volume on the base. complete the test call. Gently push the headset into the charge cradle. Charge for at least 20 minutes prior to the first use. A full charge takes 3 hours. 7. Connecting to the PC Charging time 20 min ..................... minimum charge before first use 3 hours ................... Full charge 5. Checking Configuration volume and desk phone listening volume are both set to 3. 5-1. Set volume on desk phone to mid-range. 5-2. On the base, ensure the configuration switch is set to A and the desk phone speaking nOte For most phones, these factory default settings will sound the best. 5-3. With your headset on, press the call control button on headset. 5-4. Remove the handset from desk phone cradle. 7-1. Connect the USB cable to the USB port on the back of the base. 7-2. Connect the other end of the USB cable to the USB port on the PC. 7-3. Insert the CD and install the PerSono Suite software. Follow the installation instructions shown on your PC. 8. Making a test Call with PC 8-1. Ensure the PerSono Suite software is running on your PC. 8-2. With your headset on, press the PC talk button on the base. 8-3. Dial the number using your softphone application. 8-4. Adjust listening and speaking volume using your softphone application and/or sound and 8-5. You can fine tune the listening volume on the headset. 8-6. To end the test call, press the call control button on the headset. audio devices in your PC control panel. Please refer to the complete User Guide located on the CD for further details on how to use your Savi Office WO200 Professional Wireless Headset System. Base Savi WO1 11 10 Bienvenue Cble dinterface tlphonique 1 2 3 5 Bloc dalimentation de la base 4 9 8 6 7 1. Volume dmission du tlphone 2. Commutateur de configuration 3. Volume de rception du tlphone 4. Bouton dassociation et voyant 5. Voyant dalimentation/charge 6. Prise dalimentation 7. Prise du dcrocheur de combin 8. Prise de cble dinterface tlphonique 9. Port USB 10. Bouton de conversation par tlphone et voyant 11. Bouton de conversation par ordinateur et voyant Micro-casque Savi WH210 Cble USB Contenu du CD :
Logiciel PerSono Guide de configuration Guide de lutilisateur anim complet 1 5 3 4 2 6 1. Volume (contrle aussi les fonctions de sourdine et de commutation) 2. Bouton de contrle des appels 3. Voyant 4. Microphone liminateur de bruit 5. Embouts 6. Chargeur Flicitations pour votre nouveau produit Plantronics. Ce guide explique comment installer le systme de micro-casque sans fil professionnel Savi Office WO200. systme de micro-casque sans fil professionnel Savi Office WO100. Veuillez lire les consignes de scurit fournies sparment avant dinstaller ou dutiliser le produit. Elles contiennent des renseignements importants relatifs la scurit. Configuration systme requise La configuration systme requise pour Savi Office est la suivante :
Systmes dexploitation compatibles : Windows XP et Windows Vista Processeur : 400 MHz (minimum); 1 GHz (recommand) Mmoire : 96 Mo (minimum); 256 Mo (recommand) Disque dur : 280 Mo (minimum); 500 Mo (recommand) Affichage : 800 x 600, 256 couleurs (minimum); 1 024 x 768, couleurs 32 bits (recommand) Internet Explorer version 6 nous vous recommandons fortement de vous reporter aux instructions du guide de configuration anim et du guide de lutilisateur complet sur le CD. Renseignements sur la scurit Attention : Nutilisez pas les casques et micro-casques volume lev sur de longues priodes. Cela pourrait provoquer des problmes daudition. Conservez toujours un niveau dcoute modr. Consultez le site www.plantronics.com/healthandsafety pour obtenir de plus amples renseignements sur les micro-casques et laudition. Installation du Savi Office WO200 1. Connexion du chargeur la base Connectez le chargeur la base. Appuyez fermement sur le chargeur jusqu ce quil soit bien en place. 2. Connexion de la base au tlphone 2-1. Branchez le cble dinterface dans la prise dinterface de la base. 2-2. Dbranchez le cble enroul de combin sur le tlphone, puis branchez le cble dinterface 2-3. Branchez le cble enroul de combin dans la bote de jonction du cble dinterface. dans cette mme prise sur le tlphone. 3. Branchement du bloc dalimentation 3-1. Branchez la mini-fiche du bloc dans la prise dalimentation de la base. 3-2. Branchez la fiche dans une prise lectrique. 4. Recharge du micro-casque des appels du micro-casque, puis passez ltape 6. Appel de test avec le tlphone. 5-5. Vous devriez entendre la tonalit. Si la tonalit est claire, appuyez sur le bouton de contrle 5-6. Si la tonalit est trop forte ou trop faible, rglez le volume du micro-casque. 5-7. Si, malgr vos rglages, la tonalit nest toujours pas clairement audible, changez la position ReMARQUe : mme si plusieurs rglages peuvent fonctionner avec le tlphone, un seul est optimal. 5-8. Pour terminer la configuration, appuyez sur le bouton de contrle des appels du micro-
du slecteur de configuration jusqu ce quelle vous convienne. casque et reposez le combin sur le tlphone. 6. Appel de test avec le tlphone 6-1. Mettez le micro-casque, puis appuyez sur le bouton de contrle des appels. 6-2. Soulevez le combin du tlphone. 6-3. Composez le numro sur le tlphone. 6-4. Au besoin, rglez le volume de rception sur le micro-casque. 6-5. Sil est encore trop fort ou trop faible, ajustez-le sur la base du tlphone. 6-6. Si le volume dmission ne convient pas votre interlocuteur, rglez-le sur 6-7. Pour terminer lappel de test, appuyez sur le bouton de contrle des appels du micro-
la base du tlphone. casque et reposez le combin sur le tlphone. Poussez doucement le micro-casque dans le chargeur. Chargez le micro-casque pendant au moins 20 minutes avant de lutiliser pour la premire fois. Une charge complte dure 3 heures. 7. Connexion lordinateur temps de Charge 20 min ..................... Charge minimale avant la premire utilisation 3 heures .................. Charge complte 5. Vrification de la configuration volumes dmission et de rception du tlphone sont rgls sur 3. 5-1. Sur le tlphone, rglez le volume la moiti. 5-2. Assurez-vous que le slecteur de configuration de la base est positionn sur A et que les ReMARQUe : sur la plupart des tlphones, ces rglages par dfaut permettent dobtenir la meilleure qualit sonore. 5-3. Mettez le micro-casque, puis appuyez sur le bouton de contrle des appels. 5-4. Soulevez le combin du tlphone. 7-1. Branchez une extrmit du cble USB dans le port USB larrire de la base. 7-2. Branchez lautre extrmit dans un port USB de lordinateur. 7-3. Insrez le CD dans le lecteur optique de lordinateur et installez le logiciel PerSono. Suivez les instructions affiches. 8. Appel de test avec lordinateur 8-1. Dmarrez PerSono Suite sur lordinateur. 8-2. Mettez le micro-casque, puis appuyez sur le bouton de conversation par PC sur la base. 8-3. Composez le numro de tlphone avec votre application de tlphonie. 8-4. Vous pouvez rgler le volume dmission et dcoute avec lapplication de tlphonie ou avec loption Sons et priphriques audio du Panneau de configuration de Windows. 8-5. Vous pouvez ajuster le volume dcoute sur le micro-casque. 8-6. Pour raccrocher, appuyez sur le bouton de contrle des appels du micro-casque. Pour plus de dtails sur lutilisation de votre systme de micro-casque sans fil professionnel Savi Office WO200, consultez le guide de lutilisateur sur le CD. Base Savi WO1 11 10 Bienvenido Cable de interfaz del telfono Felicidades por su compra de un nuevo producto Plantronics. Esta gua de inicio rpido contiene instrucciones para configurar el sistema de audfonos inalmbricos profesionales Savi Office WO200. Antes de instalar o utilizar el producto, consulte las instrucciones de seguridad (aparte) para obtener informacin importante acerca de la seguridad del producto. Requisitos del sistema 1 2 3 5 4 Fuente de alimentacin de la base 9 8 6 7 1. Volumen de conversacin del telfono de escritorio 2. Control de configuracin 3. Volumen de escucha del telfono de escritorio 4. Botn de suscripcin y luz indicadora 5. Luz indicadora de energa/carga 6. Entrada de alimentacin 7. Entrada del dispositivo para descolgar el telfono 8. Entrada del cable de interfaz del telfono 9. Puerto USB 10. Botn de conversacin por el telfono de escritorio 11. Botn de conversacin por la PC y luz indicadora Audfono Savi WH210 y luz indicadora Cable USB El CD incluye:
Software PerSono Suite Gua animada de configuracin Manual del usuario completo 1 5 6 3 4 2 1. Volumen de escucha (tambin controla las funciones de silencio y conmutacin) 2. Botn de control de llamadas 3. Luz indicadora 4. Micrfono con anulacin de ruido 5. Tapones 6. Base de carga Los requisitos mnimos del sistema para Savi Office son:
Sistemas operativos compatibles: Windows XP, Windows Vista Procesador: procesador Pentium a 400 MHz o equivalente (mnimo); procesador Pentium a 1GHz o equivalente (recomendado) RAM: 96 MB (mnimo); 256 MB (recomendado) Disco duro: 280 MB (mnimo); 500 MB (recomendado) Pantalla: 800 x 600, 256 colores (mnimo); 1024 x 768 color de alta calidad, 32 bits Debe tener instalado Internet Explorer V6 o posterior en el sistema (necesario)
(recomendado) Le recomendamos que consulte las instrucciones animadas de configuracin y el manual del usuario completo incluidos en el CD. Instrucciones de seguridad No use nunca los audfonos o auriculares a un volumen alto durante periodos prolongados. Esto puede causar prdida de audicin. Use siempre un volumen moderado. Visite www. plantronics.com/healthandsafety para obtener ms informacin acerca de los auriculares y la audicin. Instalacin del sistema Savi Office WO200 1. Conexin de la base de carga a la base Conecte la base de carga del audfono a la base. Presione firmemente la base de carga contra la base hasta que encaje en su sitio. 2. Conexin de la base al telfono de escritorio 2-1. Conecte el cable de interfaz del telfono a la entrada correspondiente en la base. 2-2. Despus de desconectar el cable espiral del auricular del telfono de escritorio, conecte 2-3. Conecte el cable espiral del auricular a la caja de conexiones del cable de interfaz del el cable de interfaz del telfono a la entrada de auricular (ahora desocupada) del telfono de escritorio. telfono. 3. Conexin de la fuente de alimentacin a la base 3-1. Conecte la fuente de alimentacin de la base a la entrada de alimentacin de la base. 3-2. Conecte la fuente de alimentacin a una toma de corriente. 4. Acoplamiento y carga del audfono Presione suavemente el audfono en la base de carga. Crguelo durante al menos 20 minutos antes de usarlo por primera vez. La carga completa tarda 3 horas. tiempo de Carga 20 min ..................... Carga mnima antes del primer uso 3 horas .................... Carga completa 5. Comprobacin de la configuracin 5-1. Ajuste el volumen del telfono de escritorio en un nivel intermedio. 5-2. En la base, compruebe que el control de configuracin est ajustado en A, y que el nOtA En la mayora de los telfonos, estos ajustes preconfigurados de fbrica producen un sonido 5-3. Con el audfono puesto, presione el botn de control de llamadas del audfono. 5-4. Retire el auricular de la base del telfono de escritorio. volumen de conversacin y el volumen de escucha del telfono de escritorio estn ajustados en el nivel 3. ptimo. audfono. botn de control de llamadas del audfono y contine con el paso 6. Realizacin de una llamada de prueba con el telfono de escritorio. 5-5. Espere a escuchar el tono de marcar. Si escucha claramente el tono de marcar, presione el 5-6. Si el tono de marcar se escucha demasiado alto o demasiado bajo, ajuste el volumen del 5-7. Si el tono de marcar an no suena claro, ajuste el control de configuracin hasta obtener un nOtA Puede haber varias configuraciones que funcionen con su telfono; sin embargo, solo una 5-8. Presione el botn de control de llamadas del audfono y devuelva el auricular a la base para finalizar la configuracin. es la posicin ptima. sonido ptimo. 6. Realizacin de una llamada de prueba con el telfono de escritorio 6-1. Con el audfono puesto, presione el botn de control de llamadas del audfono. 6-2. Retire el auricular de la base del telfono de escritorio. 6-3. Marque el nmero en el telfono de escritorio. 6-4. Si es necesario, ajuste el volumen de escucha en el audfono. 6-5. Si el volumen de escucha sigue siendo demasiado alto o demasiado bajo, ajuste el volumen 6-6. Si el volumen de conversacin es demasiado alto o demasiado bajo para su interlocutor, 6-7. Presione el botn de control de llamadas del audfono y devuelva el auricular a la base para ajuste el volumen de conversacin del telfono de escritorio en la base. de escucha del telfono de escritorio en la base. finalizar la llamada de prueba. 7. Conexin a la PC 7-1. Conecte el cable USB al puerto USB de la parte posterior de la base. 7-2. Conecte el otro extremo del cable USB al puerto USB de la PC. 7-3. Inserte el CD e instale el paquete de software PerSono . Siga las instrucciones de instalacin que aparecen en la PC. 8. Realizacin de una llamada de prueba con la PC 8-1. Compruebe que el paquete de software PerSono se est ejecutando en su PC. 8-2. Con el audfono puesto, presione el botn de conversacin por la PC de la base. 8-3. Marque el nmero con la aplicacin de telfono. 8-4. Ajuste el volumen de escucha y de conversacin con la aplicacin de telfono o en 8-5. Puede realizar un ajuste fino del volumen de escucha en el auricular. 8-6. Para terminar la llamada de prueba, presione el botn de control de llamadas del audfono. Consulte el manual del usuario completo incluido en el CD para obtener ms informacin acerca de cmo usar el sistema de audfonos inalmbricos profesionales Savi Office WO200. Dispositivos de sonido y audio, en el Panel de control de la PC. Base do Savi WO1 11 10 Bem-vindo As Cabo de interface Parabns por adquirir o seu novo produto da Plantronics. Este Guia de Incio Rpido contm instrues para configurar o sistema de headset wireless profissional do Savi Office WO200. Consulte o folheto de instrues sobre segurana para obter informaes importantes de segurana do produto antes da instalao ou do uso do produto. Requisitos de sistema 1 2 3 5 Fonte de alimentao da base 4 9 8 6 7 1. Volume de fala do telefone de mesa 2. Chave de configurao 3. Volume de audio do telefone de mesa 4. Boto de vinculao e luz indicadora 5. Luz indicadora de energia/carga 6. Entrada de energia 7. Tomada do suporte de monofone 8. Entrada do cabo de interface do telefone 9. Porta USB 10. Boto de conversao e luz indicadora do telefone 11. Boto de conversao e luz indicadora do PC de mesa Headset Savi WH210 Os requisitos mnimos de sistema para o Savi Office so os seguintes:
Sistemas operacionais suportados: Windows XP, Windows Vista Processador: processador Pentium de 400 MHz ou equivalente (mnimo); processador Pentium de 1GHz ou equivalente (recomendado) RAM: 96 MB (mnimo); 256 MB (recomendado) Disco rgido: 280 MB (mnimo); 500 MB (recomendado) Visor: 800 x 600, 256 cores (mnimo); cores de alta resoluo de 1024 x 768, 32 bits Internet Explorer 6.0 ou superior (necessrio)
(recomendado) Cabo USB O CD inclui:
Software PerSono Suite Guia de instalao animado Guia completo do usurio Recomendamos que voc consulte o CD com instrues interativas de configurao e o Guia do Usurio. 1 5 3 4 2 6 1. Volume de audio (controla tambm as funes de mudo e alternncia) 2. Boto de controle de chamadas 3. Luz indicadora 4. Cancelamento de rudos 5. Pontas auriculares 6. Base de carga Instrues de Seguran No use fones de ouvido/headsets em volume muito alto por perodos prolongados de tempo. Isso pode causar a perda de audio. Oua sempre em nveis moderados. Visite www.plantronics. com/healthandsafety para obter mais informaes sobre headsets e assuntos de audio. Configurando o sistema Savi Office WO200 1. Conectando a base de carga base Conecte a base de carga do headset base. Empurre firmemente a base at que ela se encaixe e fique no lugar. 2. Conectando a base ao telefone de mesa 2-1. Conecte o cabo de interface do telefone entrada do cabo de interface na base. 2-2. Aps desconectar o cabo espiral do monofone do telefone de mesa, conecte o cabo de 2-3. Conecte o cabo espiral do monofone caixa de juno do cabo de interface do telefone. interface do telefone para abrir a porta do monofone no telefone de mesa. 3. Conectando a fonte de alimentao base 3-1. Conecte a fonte de alimentao da base na entrada de energia da base. 3-2. Conecte a fonte de alimentao tomada. 4. encaixando e recarregando o headset Empurre levemente o headset para a base de carga. Carregue por, no mnimo, 20 minutos antes de usar pela primeira vez. Uma carga completa leva 3 horas. tempo de Carregamento 20 min ..................... Carga mnima antes do primeiro uso 3 horas .................... recarga completa 5. Verificando a configurao volumes de fala e de audio do telefone estejam definidos para 3. 5-1. Ajuste o volume do telefone de mesa para um nvel mdio. 5-2. Na base, certifique-se de que a chave de configurao esteja definida para A e que os nOtA para a maioria dos telefones, as configuraes padres de fbrica so as melhores. 5-3. Com o seu headset ligado, pressione o boto de controle de chamadas do headset. 5-4. Remova o monofone da base do telefone de mesa. de chamadas do headset e continue no Passo 6. Fazendo uma chamada teste com o telefone de mesa. 5-5. Oua um tom de discagem. Se o tom de discagem for claro, pressione o boto de controle 5-6. Se o tom de chamada soar muito alto ou muito suave, ajuste o volume do headset. 5-7. Se o tom de discagem no soar claro, ajuste a chave de configurao at que ele atinja nOtA diversas configuraes podem funcionar com o seu telefone; no entanto, apenas uma ser 5-8. Pressione o boto de controle de chamadas do headset e retorne o monofone base para concluir a configurao. a posio ideal. o som ideal. 6. Fazendo uma chamada teste com o telefone de mesa 6-1. Com o seu headset ligado, pressione o boto de controle de chamadas do headset. 6-2. Remova o monofone da base do telefone de mesa. 6-3. Disque o nmero usando o seu telefone de mesa. 6-4. Se necessrio, ajuste o volume de audio do headset. 6-5. Se o volume de audio do telefone de mesa ainda estiver muito alto ou muito suave, 6-6. Se o volume de fala estiver muito alto ou muito suave para o receptor, ajuste o volume de 6-7. Pressione o boto de controle de chamadas do headset e retorne o monofone base para concluir a chamada teste. fala do telefone na base. ajuste-o na base. 7. Conectando ao PC 7-1. Conecte o cabo USB na porta USB da parte traseira da base. 7-2. Conecte a outra extremidade do cabo USB na porta USB do PC. 7-3. Insira o CD e instale o software PerSono Suite. Siga as instrues de instalao exibidas em seu computador. 8. Fazendo uma chamada teste com o PC 8-1. Verifique se o software PerSono Suite est em execuo no seu computador. 8-2. Com o headset ligado, pressione o boto de conversao do computador na base. 8-3. Disque um nmero usando o aplicativo do seu softphone 8-4. Ajuste os volumes de fala e audio usando o aplicativo do seu softphone e/ou na opo 8-5. Voc pode ajustar da melhor forma o volume de audio no headset. 8-6. Para finalizar a chamada teste, pressione o boto de controle de chamadas no headset. Consulte o Guia de Usurio, que est no CD, para obter mais detalhes de como usar o seu sistema de headset wireless profissional do Savi Office WO200. Sons e Dispositivos de udio no Painel de Controle do seu computador. Homologao Anatel Este produto est homologado pela ANATEL, de acordo com os procedimentos regulamentados pela resoluo 242/2000, e atende aos requisitos tcnicos aplicados. Para maiores informaes consulte o site da ANATEL. http://www.anatel.gov.br 0647-09-1893
( 0 1 ) 0 7 8 9 8 4 0 1 7 1 0 6 1 0 PROTEO CONTRA INTERFERNCIA PREJUDICIAL, MESMO DE ESTAES DO MESMO TIPO E ESTE EQUIPAMENTO OPERA EM CARTER SECUNDRIO. ISTO , NO TEM DIREITO A NO PODE CAUSAR INTERFERNCIA A SISTEMAS OPERANDO EM CARTER PRIMRIO. Distribudo por Plantronics Telecomunicaes Ltda CNPJ 05.758.913/0001-95 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the radio or television off and on, the user is encouraged to try to correct interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on another circuit. 4. Consult the dealer or an experienced radio/TV technician for help. FCC REGISTRATION INFORMATION Part 68 This equipment complies with Part 68 of the FCC rules and the requirements adopted by ACTA. On the exterior of this equipment is a label that contains a product identifier in the format US:AAAEQ##TXXXX. If requested, this information must be provided to your telephone company. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible jack that is also compliant. See installation instructions for details. The REN is useful to determine the quantity of devices you may connect to your telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, contact your local telephone company. For products approved after August 8, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without the decimal point. (For example, 03 represents a REN of 0.3.) For earlier producers, the REN is separately shown on the label. If this telephone equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance in order for you to make necessary modifications to maintain uninterrupted service. If trouble is experienced with this unit, for repair or warranty information, please contact customer service at (800) 544-4660. If the equipment is causing harm to the network, the telephone company may request that you disconnect the equipment until the problem is resolved. DO NOT DISASSEMBLE THIS EQUIPMENT: it does not contain any user-serviceable components. We recommend the installation of an AC surge arrester in the AC outlet to which this equipment is connected. Telephone companies report that electrical surges, typically lighting transients, are very destructive to customer terminal equipment connected to AC power sources. Exposure to RF Radiation The internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. Independent studies have shown that the internal wireless radio is safe for use by consumers. Visit www.plantronics.com for more information. In order to comply with FCC RF Exposure requirements, the base must be installed and operated such that a minimum separation distance of 20 cm is maintained between the base and all persons during normal operation. NOTE: Modifications not expressly approved by Plantronics, Inc. could void the users authority to operate the equipment. InDuSTRy CAnADA ReGulATORy InfORMATIOn This product meets the applicable Industry Canada technical specifications/Le prsent materiel est conforme aux specifications techniques applicable d Induristrie Canada. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Plantronics, Inc. 345 Encinal Street Santa Cruz, CA 95060 United States Tel: 800-544-4660 Tel: 831-426-5858 www.plantronics.com 2008 Plantronics, Inc. All rights reserved. Plantronics, the logo design, PerSono, Savi, and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. All other trademarks are the property of their respective owners. Patents US 5,210,791; D539,266; D469,756; Australia 147229; France 651,857-651,865; Germany 40108524.4; GB Regd.Des.No. 2104923; Patents Pending. 82328-02 (07.09) en ar bg cs da de el es fa fr he hr hu it mk nl no pl pt ro ru sl sv tr Safety Instructions Bezpenostn pokyny Sikkerhedsvejledning Sicherheitshinweise Instrucciones de seguridad Instructions de scurit Sigurnosne upute Biztonsgi elrsok Informazioni sulla sicurezza Veiligheidsinstructies Sikkerhetsinstruksjoner Instrukcje bezpieczestwa Instrues de Segurana Instruciuni de siguran Varnostna navodila Skerhetsanvisningar Instruciuni de siguran Safety Instructions Please read the following safety and operational instructions before using your Plantronics product. Please keep these instructions for your reference. When using this product, these basic safety precautions and warnings should be followed to reduce the risk of fire, electric shock, injury to persons and damage to property. General Operating, charging and storage temperature is 0C to 40C (32F to 104F). Warnings Only use those Plantronics products designed for use with this Plantronics system. CHILDREN. Never allow children to play with the productsmall parts may be a choking hazard. Plug the AC adapter into the outlet nearest the equipment that is easily accessible. To reduce the risk of electric shock, explosion or fire, use only the supplied charger or Class 2 AC adapter to charge the headset. Ensure that the voltage rating (e.g. 120v, 60 Hz) corresponds to the power supply you intend to use. Do not disassemble the product or AC adapter as this may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock or fire when the product is subsequently used. Do not insert anything into the product because this may cause damage to the internal components or cause injury to you. If this system includes a mobile phone headset, check local laws regarding use of a mobile phone and headset while driving. If you use the headset while driving, ensure your attention and focus remain on driving safely. Use of a headset that covers both ears will impair your ability to hear other sounds. Use of such a headset while operating a motor vehicle or riding a bicycle may create a serious hazard to you and/or others, and is illegal in most states and regions. If this system includes a Bluetooth headset, observe all signs or instructions that require an electrical device or RF radio product to be switched off in designated areas, such as hospitals, blasting areas, potentially explosive atmospheres, and aircraft. Avoid contact with liquids. Do not locate this product near water, for example, near a bathtub, or sink, in a wet basement, or near a swimming pool. Discontinue use of product and contact Plantronics if the product overheats, has a damaged cord or plug, if the product has been dropped or damaged, or if the product has come into contact with liquids. This product should never be placed over or near a heat register and should not be placed in locations without which do not have proper ventilation. N E If you experience a skin irritation after using this product, discontinue use and contact Plantronics. Exposure to high volume sound levels or excessive sound pressure may cause temporary or permanent damage to your hearing. Although there is no single volume setting that is appropriate for everyone, you should always use your headset/headphones with the volume set at moderate levels and avoid prolonged exposure to high volume sound levels. The louder the volume, the less time is required before your hearing could be affected. You may experience different sound levels when using your headset /headphones with different devices. The device you use and its settings affect the level of sound you hear. If you experience hearing discomfort, you should stop listening to the device through your headset/headphones and have your hearing checked by your doctor. To protect your hearing, some hearing experts suggest that you:
1. Set the volume control in a low position before putting your headset or headphones on your ears and use as low a volume as possible. 2. Avoid turning up the volume to block out noisy surroundings. Whenever possible, use your headset or headphones in a quiet environment with low background noise. 3. Limit the amount of time you use headsets or headphones at high volume levels. 4. Turn the volume down if the sound from the headset/headphones prevent you from hearing people speaking near you. See www.plantronics.com/healthandsafety for more information on headsets/headphones and hearing. To avoid the risk of electric shock, explosion, fire or leakage of corrosive or toxic chemicals, please observe the following charging and battery warnings:
Charging Warnings Use only the charger supplied by Plantronics to charge the product. Do not use the charger for any other purpose. Ensure that the voltage rating corresponds to the power supply you intend to use. Charge the headset/headphones according to the instructions supplied with the unit. Plug the AC adapter or charger into an outlet that is near the equipment and will be easily accessible. Never charge the battery where the temperature may fall below 0C (32F) or rise above 40C (104F) -
for example in an unattended motor vehicle. Avoid charging the battery while it is unattended. Headset Battery Warnings The headset is equipped with a non-replaceable battery. To reduce the risk of fire or injury to persons, read and follow these instructions. Do not attempt to open the headset or remove the battery. Do not dispose of the headset or battery in a fire. The battery may explode. Check local laws for disposal instructions. Do not open or mutilate the battery. There may be corrosive materials which can cause damage to eyes or skin and may be toxic if swallowed. Charge the headset according to the instructions supplied with the headset. RECYCLING: The battery used in your headset must be recycled or disposed of properly. Contact your local recycling center for proper disposal of your headset. Plantronics. A R Plantronics Plantronics . Class 2 . ( 120 60
) .
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-11-05 | 1921.53 ~ 1928.45 | PUE - Part 15 Unlicensed PCS portable Tx held to ear | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2009-11-05
|
||||
1 | Applicant's complete, legal business name |
Plantronics Inc
|
||||
1 | FCC Registration Number (FRN) |
0008910937
|
||||
1 | Physical Address |
345 Encinal Street
|
||||
1 |
Santa Cruz, CA
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
p******@pctestlab.com
|
||||
1 | TCB Scope |
A3: Unlicensed Personal Communication System (PCS) devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AL8
|
||||
1 | Equipment Product Code |
WH210
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M****** L****
|
||||
1 | Title |
Global Compliance Manager
|
||||
1 | Telephone Number |
+44-1********
|
||||
1 | Fax Number |
831-4********
|
||||
1 |
m******@plantronics.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 | Name |
R**** O****
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
p******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | PUE - Part 15 Unlicensed PCS portable Tx held to ear | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Communications System Headset | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | The output power is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Elliott Laboratories LLC
|
||||
1 | Name |
D******** B********
|
||||
1 | Telephone Number |
408-2******** Extension:
|
||||
1 | Fax Number |
408-2********
|
||||
1 |
d******@elliottlabs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15D | 1921.53000000 | 1928.45000000 | 0.0820000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC