submitted / available | |||||||
---|---|---|---|---|---|---|---|
|
Label | ID Label/Location Info | 58.67 KiB | November 21 2023 / December 08 2023 | |||
BOM LIST | Parts List/Tune Up Info | November 21 2023 | confidential | ||||
Block Diagram | Block Diagram | November 21 2023 | confidential | ||||
|
Confidentiality signed | Cover Letter(s) | 145.31 KiB | November 21 2023 / December 08 2023 | |||
External Photos | External Photos | November 21 2023 / May 20 2024 | delayed release | ||||
Internal photos | Internal Photos | November 21 2023 / May 20 2024 | delayed release | ||||
|
MPE report | RF Exposure Info | 643.40 KiB | November 21 2023 / December 08 2023 | |||
Operational Description | Operational Description | November 21 2023 | confidential | ||||
|
Power of Attorney Letter | Cover Letter(s) | 80.54 KiB | November 21 2023 / December 08 2023 | |||
SCH | Schematics | November 21 2023 | confidential | ||||
Software security declaration | SDR Software/Security Inf | November 21 2023 | confidential | ||||
Test Setup Photos | Test Setup Photos | November 21 2023 / May 20 2024 | delayed release | ||||
|
Test report | Test Report | 1.42 MiB | November 21 2023 / December 08 2023 | |||
Tune up procedure | Parts List/Tune Up Info | November 21 2023 | confidential | ||||
|
U-NII 6 GHz Attestation | Attestation Statements | 80.67 KiB | November 21 2023 / December 08 2023 | |||
|
US Agent letter | Attestation Statements | 133.29 KiB | November 21 2023 / December 08 2023 | |||
User manual | Users Manual | November 21 2023 / May 20 2024 | delayed release | ||||
|
antenna report | Test Report | 1.26 MiB | November 21 2023 / December 08 2023 | |||
|
applicant cover letter | Attestation Statements | 115.66 KiB | November 21 2023 / December 08 2023 | |||
|
modular cover letter | Cover Letter(s) | 190.41 KiB | November 21 2023 / December 08 2023 | |||
BOM | Parts List/Tune Up Info | November 21 2023 | confidential | ||||
Tune up | Parts List/Tune Up Info | November 21 2023 | confidential | ||||
Internal photo | Internal Photos | November 21 2023 / May 20 2024 | delayed release | ||||
test setup photo | Test Setup Photos | November 21 2023 / May 20 2024 | delayed release | ||||
SDR Software | SDR Software/Security Inf | November 21 2023 | confidential | ||||
|
UNII Declaration Letter | Attestation Statements | 100.20 KiB | November 21 2023 / December 08 2023 |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-12-08 | 5925 ~ 7125 | 6XD - 15E 6 GHz Low Power Indoor Client | Original Equipment |
2 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
4 | 5725 ~ 5850 | NII - Unlicensed National Information Infrastructure TX |
Applicant Information | ||||||
---|---|---|---|---|---|---|
Effective |
2023-12-08
|
|||||
Applicant's complete, legal business name |
Quectel Wireless Solutions Company Limited
|
|||||
FCC Registration Number (FRN) |
0018988279
|
|||||
Physical Address |
Building 5, Shanghai Business Park PhaseIII (Area B),No.1016 Tianlin Road, Minhang District
|
|||||
Building 5, Shanghai Business Park PhaseIII
|
||||||
Shanghai, N/A
|
||||||
China
|
||||||
TCB Information | ||||||
TCB Application Email Address |
U******@SGS.COM
|
|||||
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
FCC ID | ||||||
Grantee Code |
XMR
|
|||||
Equipment Product Code |
2023FC65E
|
|||||
Person at the applicant's address to receive grant or for contact | ||||||
Name |
J******** H****
|
|||||
Telephone Number |
+8602******** Extension:
|
|||||
Fax Number |
+8621********
|
|||||
j******@quectel.com
|
||||||
Technical Contact | ||||||
n/a | ||||||
Non Technical Contact | ||||||
n/a | ||||||
Confidentiality (long or short term) | ||||||
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/20/2024 | |||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
Cognitive Radio & Software Defined Radio, Class, etc | ||||||
Is this application for software defined/cognitive radio authorization? | No | |||||
Equipment Class | 6XD - 15E 6 GHz Low Power Indoor Client | |||||
DTS - Digital Transmission System | ||||||
DSS - Part 15 Spread Spectrum Transmitter | ||||||
NII - Unlicensed National Information Infrastructure TX | ||||||
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wi-Fi & Bluetooth Module | |||||
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | |||||
Modular Equipment Type | Single Modular Approval | |||||
Does not apply | ||||||
Purpose / Application is for | Original Equipment | |||||
Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | |||||
Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
Grant Comments | Single Modular Approval. Output Power listed is conducted. Device is an 802.11a/ax device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 6GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed -0.24 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device has 20, 40, 80 and 160 MHz bandwidth modes. | |||||
Single Modular Approval. Output Power listed is conducted. Device is an 802.11b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 2.4GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 0.73 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device has 20 and 40 MHz bandwidth modes. | ||||||
Single Modular Approval. Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 0.73 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. | ||||||
Single Modular Approval. Output Power listed is conducted. Device is an 802.11a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 5GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.14 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device has 20, 40, 80 and 160 MHz bandwidth modes. | ||||||
Is there an equipment authorization waiver associated with this application? | No | |||||
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
Test Firm Name and Contact Information | ||||||
Firm Name |
SGS-CSTC Standards Technical Services (Suzhou) Co.
|
|||||
Name |
W****** W****
|
|||||
Telephone Number |
+86 1********
|
|||||
w******@sgs.com
|
||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC MO | 5925.00000000 | 7125.00000000 | 0.0352000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402 | 2480 | 0.0067 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC MO | 2422 | 2462 | 0.4227 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0078000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15E | CC MO | 5150 | 5250 | 0.058 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15E | CC MO ND | 5250 | 5350 | 0.075 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15E | CC MO ND | 5470 | 5725 | 0.067 | |||||||||||||||||||||||||||||||||||
4 | 4 | 15E | CC MO | 5725 | 5850 | 0.069 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC