FCC ID: TX2-RTL8821AU 802.11 a/b/g/n/ac RTL8821AU Combo Module

by: Realtek Semiconductor Corp. latest update: 2017-12-08 model: RTL8821AU

Ten grants have been issued under this FCC ID from 03/06/2014 to 12/08/2017 (this is one of seventy-three releases in 2017 for this grantee). Public details available include internal & external photos, manuals, and frequency information. some products also feature user submitted or linked password defaults, instructions, troubleshooting guides, warrantee terms, & drivers.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various User Manual Users Manual pdf 184.60 KiB June 03 2014
various User manual - 1 Users Manual pdf 3.11 MiB August 12 2017 / June 06 2018
various User manual - 2 Users Manual pdf 5.66 MiB August 12 2017 / June 06 2018
various User manual - 3 Users Manual pdf 4.74 MiB June 12 2017 / April 06 2018
various User manual - 4 Users Manual pdf 4.31 MiB June 12 2017 / April 06 2018
various User manunal - 2 Users Manual pdf 4.90 MiB June 12 2017 / April 06 2018
various Cover Letter(s) pdf August 12 2017
various Cover Letter(s) pdf August 12 2017
various External Photos pdf August 12 2017 / June 06 2018
various Test Report pdf August 12 2017
various Test Report pdf August 12 2017
various Test Setup Photos pdf August 12 2017 / June 06 2018
various Test Report pdf August 12 2017
various Test Report pdf August 12 2017
various Test Report pdf August 12 2017
various Cover Letter(s) pdf August 12 2017
various Internal Photos pdf August 12 2017 / June 06 2018
various ID Label/Location Info pdf August 12 2017
various Test Setup Photos pdf August 12 2017 / June 06 2018
various Internal Photos pdf August 12 2017 / June 06 2018
various Test Report pdf August 12 2017
various Test Report pdf August 12 2017
various Test Report pdf August 12 2017
various Test Setup Photos pdf August 12 2017 / June 06 2018
various Test Report pdf August 12 2017
various Test Report pdf August 12 2017
various Test Setup Photos pdf August 12 2017 / June 06 2018
various Test Report pdf August 12 2017
various Cover Letter(s) pdf June 12 2017
various Test Report pdf June 12 2017
various Test Report pdf June 12 2017
various Test Report pdf June 12 2017
various Test Setup Photos pdf June 12 2017 / April 06 2018
various Test Setup Photos pdf June 12 2017 / April 06 2018
various Test Setup Photos pdf June 12 2017 / April 06 2018
various Test Report pdf June 12 2017
various Test Report pdf June 12 2017
various Test Report pdf June 12 2017
various Test Setup Photos pdf June 12 2017 / April 06 2018
various Test Setup Photos pdf June 12 2017 / April 06 2018
various Test Setup Photos pdf June 12 2017 / April 06 2018
various Test Setup Photos pdf June 12 2017 / April 06 2018
various Test Report pdf June 12 2017
various Test Report pdf June 12 2017
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various Test Report pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various Attestation Statements pdf June 03 2014
various Attestation Statements pdf June 03 2014
various Cover Letter(s) pdf June 03 2014
various Cover Letter(s) pdf June 03 2014
various Cover Letter(s) pdf June 03 2014
various External Photos pdf June 03 2014
various Internal Photos pdf June 03 2014
various ID Label/Location Info pdf June 03 2014
various RF Exposure Info pdf June 03 2014
various Test Report pdf June 03 2014
various Test Report pdf June 03 2014
various Test Report pdf June 03 2014
various Test Report pdf June 03 2014
various Test Report pdf June 03 2014
various Test Setup Photos pdf June 03 2014
various Test Setup Photos pdf June 03 2014
various User Manual Users Manual pdf 184.60 KiB June 03 2014
various User manual - 1 Users Manual pdf 3.11 MiB August 12 2017 / June 06 2018
various User manual - 2 Users Manual pdf 5.66 MiB August 12 2017 / June 06 2018
various User manual - 3 Users Manual pdf 4.74 MiB June 12 2017 / April 06 2018
various User manual - 4 Users Manual pdf 4.31 MiB June 12 2017 / April 06 2018
various User manunal - 2 Users Manual pdf 4.90 MiB June 12 2017 / April 06 2018

frequency equipment class purpose
1 2017-12-08 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
2 5745 ~ 5825 DTS - Digital Transmission System
3 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
4 2017-12-06 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
5 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
6 2412 ~ 2462 DTS - Digital Transmission System
7 2016-02-17 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
8 2014-03-06 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Original Equipment
9 5660 ~ 5700 NII - Unlicensed National Information Infrastructure TX
10 5745 ~ 5825 DTS - Digital Transmission System

Application Forms

app s Applicant Information
various Effective 2017-12-08
various 2017-12-06
various 2016-02-17
various 2014-03-06
various Applicant's complete, legal business name Realtek Semiconductor Corp.
various FCC Registration Number (FRN) 0020109807
various Physical Address No. 2
various Hsinchu, N/A 300
various Taiwan
app s TCB Information
various TCB Application Email Address u******@sgs.com
various T******@TIMCOENGR.COM
various c******@curtis-straus.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
various Grantee Code TX2
various Equipment Product Code RTL8821AU
app s Person at the applicant's address to receive grant or for contact
various Name D**** L****
various Title Project Manager
various Telephone Number 886-3******** Extension:
various Fax Number 886-3********
various E-mail d******@realtek.com
app s Technical Contact
various Firm Name Compliance Certification Services Inc.
various Name J****** H****
various C**** L********
various Physical Address No. 11. Wugong 6th Road
various New Taipei City, 24891
various Taiwan
various Telephone Number 886.2********
various 886.2******** Extension:
various 886.2******** Extension:
various Fax Number 886.2********
various E-mail j******@ccsrf.com
various c******@ccsrf.com
app s Non Technical Contact
various Firm Name Compliance Certification Services Inc.
various Name J**** H****
various C****** L******
various Physical Address No. 11. Wugong 6th Road
various New Taipei City, 24891
various Taiwan
various Telephone Number 886.2********
various 886.2******** Extension:
various 886.2******** Extension:
various Fax Number 886.2********
various E-mail j******@ccsrf.com
various c******@ccsrf.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)06/06/2018
various06/04/2018
various04/30/2014
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
variousNII - Unlicensed National Information Infrastructure TX
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)802.11 a/b/g/n/ac RTL8821AU Combo Module
various802.11a/b/g/n/ac RTL8821AU Combo module
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousPurpose / Application is forClass II permissive change or modification of presently authorized equipment
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsOutput power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This change is for module being used in different host (Portable category configuration), Host Realtek/Model: PD-S10. SAR Testing has been performed to demonstrate RF Compliance. The highest reported SAR for simultaneous transmission exposure conditions is 0.23 W/kg
variousOutput power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter This change is for module being used in different host (Portable category configuration), Host Realtek/Model: PD-S10. SAR Testing has been performed to demonstrate RF Compliance. The highest reported SAR values for stand-alone exposure condition is: 0.35 W/kg.
variousOutput power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20, 40, and 80 MHz bandwidth modes. (Date of Grant: 03/06/2014). This change is for module being used in different host (Portable category configuration), Host Realtek/Model: PD-S10. SAR Testing has been performed to demonstrate RF Compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.13 W/kg and 0.23 W/kg, respectively. The portable device has 20 and 40 MHz bandwidth modes.
variousC2PC: Integration in a new portable host (Brand name: PIONEER / model: XDP-02U.) The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.63 W/kg, 0.65 W/kg respectively. Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 and 40MHz bandwidth modes.
variousC2PC: Integration in a new portable host (Brand name: PIONEER / model: XDP-02U.) Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousC2PC: Integration in a new portable host (Brand name: PIONEER / model: XDP-02U.) The highest reported SAR values for stand-alone exposure condition is: 0.66 W/kg. Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 and 40MHz bandwidth modes.
variousOutput power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20, 40, and 80 MHz bandwidth modes. (Date of Grant: 03/06/2014) Class II Permissive Change: This class II Permissive Change is to update to the new UNII rules.
variousOutput power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousOutput power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
variousOutput power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Compliance Certification Services Inc. Wugu Lab.
various Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
various Name H**** L****
various K******** L******
various R******** C********
various Telephone Number 886-2******** Extension:
various +886-******** Extension:
various +886-******** Extension:
various Fax Number +886-********
various +886-********
various +886-********
various E-mail h******@sgs.com
various k******@tw.bureauveritas.com
various r******@tw.bureauveritas.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C 20 CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C 20 CC 2402 2480 0.003
2 2 15C 20 CC 2412 2462 0.294
2 3 15C 20 CC 5745 5825 0.301
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E 20 CC 5180 5240 0.045
3 2 15E 20 CC 5260 5320 0.069
3 3 15E 20 CC 5500 5700 0.071
3 4 15E 20 CC 5745 5825 0.068
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E 20 CC 5180 5240 0.045
4 2 15E 20 CC ND 5260 5320 0.069
4 3 15E 20 CC ND 5500 5700 0.071
4 4 15E 20 CC 5745 5825 0.068
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2412 2462 0.294
6 2 15C CC 2402 2480 0.003
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E 20 38 CC 5180 5240 0.045
7 2 15E 20 38 CC 5260 5320 0.069
7 3 15E 20 38 CC 5500 5700 0.071
7 4 15E 20 38 CC 5745 5825 0.068
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C 20 CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E 20 CC 5180 5240 0.045
9 2 15E 20 CC ND 5260 5320 0.069
9 3 15E 20 CC ND 5500 5580 0.071
9 4 15E 20 CC ND 5660 5700 0.068
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C 20 CC 2402 2480 0.003
10 2 15C 20 CC 2412 2462 0.294
10 3 15C 20 CC 5745 5825 0.301

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC