FCC ID: A3LEPP6300 WIRELESS CHARGER

QUICK START GUIDE EP-P6300 WIRELESS CHARGER TRIO Printed in Korea A00000 Rev.1.0 USA Type 08/2020 P6300_QSG_USA_Type.indd 1 P6300_QSG_USA_Type.indd 1 English 1 2 Copyright 2020 Samsung Electronics America, Inc. Other marks are the property of their respective owners.

Connect the charger to the wireless charger

( 1 ) and place the mobile device, Buds or the watch on the phone stand ( 2 ) to charge it.

Do not place foreign materials, such as metal objects, magnets, and magnetic stripe cards, between the mobile device, Buds or the watch, and the wireless charger.

Visit www.samsung.com to view the user manual and the safety information.

Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service provider for more information. FCC Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Cet quipement est conforme aux limites tablies par Industrie Canada en matire d'exposition aux radiofrquences dans un environnement non contrl. Cet appareil et son antenne ne doivent pas tre colocaliss ou fonctionner en conjonction avec tout autre antenne ou metteur. Cet quipement doit tre install et utilis avec une distance minimale de 20cm entre le radiateur et votre corps. FCC RF Radiation Exposure Statement This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Samsung Mobile Products and Recycling Samsung cares for the environment and encourages its customers to properly dispose of Devices and Samsung accessories in accordance with local regulations. In some areas, disposal of these items in household or business trash may be prohibited. Dispose of other unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recycling or call, 1-800-SAMSUNG. Samsung Electronics America, Inc 85 Challenger Road, Ridgefield Park, New Jersey, 07660 Phone: 1-800-SAMSUNG (726-7864)

CO 3-R1.0 SAMSUNG _ WIRELESSCHARGER le) Pepe ee IN UEC AON BaP BEM creer totter FCC ID : A3LEPP6300 leer caaae XE MADE IN VIETNAM /FABRIQUE AU VIETNAM

< 1:1 Artwork >

19 Chapin Rd., Building D Pine Brook, New Jersey, 07058, United States FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad, Columbia,MD21046 LETTERFORAUTHORIZATION FCC ID: A3LEPP6300 26August2022Towhomitmayconcern:I,theundersigned,herebycertifythatwearenotsubjecttoadenialoffederalbenefits,thatincludesFCCbenefits,pursuanttoSection5301oftheAntiDrugAbuseActof1988,21U.S.C.853(a).InauthorizingKoreaTestingCertificationasouragent,westillrecognizethatweareresponsibleto:a)complywiththerelevantprovisionsofthecertificationprogram;b)makeallnecessaryarrangementsfortheconductoftheevaluation,includingprovisionforexaminingdocumentationandaccesstoallareas,records(includinginternalauditreports)andpersonnelforthepurposesofevaluation(e.g.testing,inspection,assessment,surveillance,reassessment)andresolutionofcomplaints;c)makeclaimsregardingcertificationonlyinrespectofthescopeforwhichcertificationhasbeengranted;d)donotuseourproductcertificationinsuchamannerastobringtheCertificationDivisionintodisreputeandnotmakeanystatementregardingourproductcertificationwhichtheCertificationDivisionmayconsidermisleadingorunauthorized;e)uponsuspensionorcancellationofcertification,discontinueuseofalladvertisingmatterthatcontainsanyreferencetheretoandreturnanycertificationdocumentsasrequiredbytheCertificationDivision;f)usecertificationonlytoindicatetheproductsarecertifiedasbeinginconformitywithspecifiedstandards;g)endeavortoensurethatnocertificateorreportnoranypartthereofisusedinamisleadingmanner;h)ensurethatanyreferencetoourproductcertificationincommunicationmediasuchasdocuments,brochuresoradvertising,complieswiththerequirementsoftheCertificationDivision;I,theundersigned,herebyauthorizeMr.Sung-RyulKim/SeniorResearcherofKoreaTestingCertification.andhereafterreferredtoasKoreaTestingCertificationtoactonourbehalfinallmannersrelatingtoapplicationforequipmentauthorization,includingsigningofalldocumentsrelatingtothesematters.AnyandallactscarriedoutbyMs.Sung-RyulKim/SeniorResearcherofKoreaTestingCertification.onourbehalfshallhavethesameeffectasactsofourown. 19 Chapin Rd., Building D Pine Brook, New Jersey, 07058, United States i) j) keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records availabletotheCertificationDivisionwhenrequested;

takeappropriateactionwithrespecttosuchcomplaintsandanydeficienciesfoundin productsorservicesthataffectcompliancewiththerequirementsforcertification;

k) documenttheactionstaken. Thisauthorizationisvaliduntilfurtherwrittennoticefromtheapplicant. SincerelyYours Jenni Chun /GeneralManager Samsung ElectronicsNorth America INC. TEL: +1-973-808-6362 E-mail: j1.chun@samsung.com

Samsung Electronics Co., Ltd. To : Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Class II Permissive Change Request Letter Date: 08/26/2022 SUBJECT: C2PC Request letter To Whom It May Concern:

We are submitting an application for a Class II Permissive Change to the FCC&IC approval of:

Company name : Samsung Electronics Co., Ltd. Product Description : WIRELESS CHARGER FCC ID: A3LEPP6300 / Original Grant Date: 10/05/2020 IC ID : 649E-EPP6300 / Original Grant Date: 10/08/2020 The transmitter module itself has not changed. Here are the changes:

1. Several parts were replaced with other compatible parts. 2. A manufacturer of electrically equivalent parts was added. Before part list After part list 1.U35(MP1497S/MPS) 1.U35(MP1497S/MPS, RT7296BGJ8F/RICHTEK) 2.Q7,Q8,Q17,Q18,Q24,Q26,Q27,Q29,Q30,Q31,Q32

(NX138BKW/NEXPERIA) 3.J1(HY24-AB1005/JNTC) 4.U6(A94B428KUN-OCF01(T)/PKG VENDOR :

HuatianTechnology (xi 'an) Co., Ltd) 2. Q7,Q8,Q17,Q18,Q24,Q26,Q27,Q29,Q30,Q31,Q32

(NX138BKW/NEXPERIA, MMFTN138KW/Semtech) 3.J1(HY24-AB1005/JNTC, UAF05-24320-PC08/LCN) 4. U6(A94B428KUN-OCF01(T)/PKG VENDOR:ChizhouHisemiElectronics Technology Co., Ltd., TongfuMicroelectonicsCo., Ltd. Except for the change above, no other modification is performed. Also, the change dos not have any impact on the approved radio parameter such as power, frequency range, modulation etc. Sincerely, Clients signature: _____ ___________________________ Clients name & title: Jenni Chun / General Manager Contact information / address: j1.chun@samsung.com /

19 Chapin Rd., Building D Pine Brook, New Jersey, 07058, United States

19 Chapin Rd., Building D Pine Brook, New Jersey, 07058, United States 28 September 2020 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad, Columbia,MD21046 LETTERFORAUTHORIZATION FCC ID: A3LEPP6300 Towhomitmayconcern:

I,theundersigned,herebyauthorizeLabManagerHyunchae, You andofSGSKoreaCo.,Ltd.and hereafterreferredtoasSGSKorea,toactonourbehalfinallmannersrelatingtoapplicationfor equipmentauthorization,includingsigningofalldocumentsrelating tothesematters.AnyandallactscarriedoutbyLabManagerHyunchae, Youof SGSKoreaCo., Ltd.onourbehalfshallhavethesameeffectasactsofourown. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includesFCCbenefits,pursuanttoSection5301oftheAntiDrugAbuseActof1988,21U.S.C. 853(a). InauthorizingSGSKoreaasouragent,westillrecognizethatweareresponsibleto:

a) complywiththerelevantprovisionsofthecertificationprogram;

b) makeallnecessaryarrangementsfortheconductoftheevaluation,includingprovision forexaminingdocumentationandaccesstoallareas,records(includinginternalaudit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment,surveillance,reassessment)andresolutionofcomplaints;

c) makeclaimsregardingcertificationonlyinrespectofthescopeforwhichcertification hasbeengranted;

d) do not use our product certification in such a manner as to bring the Certification Divisionintodisreputeandnotmakeanystatementregardingourproductcertification whichtheCertificationDivisionmayconsidermisleadingorunauthorized;

e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any referencethereto and returnanycertification documents as requiredbytheCertificationDivision;

f) usecertificationonlytoindicatetheproductsarecertifiedasbeinginconformitywith specifiedstandards;

g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleadingmanner;

h) ensurethatanyreferencetoourproductcertificationincommunicationmediasuchas documents, brochures or advertising, complies with the requirements of the CertificationDivision;

19 Chapin Rd., Building D Pine Brook, New Jersey, 07058, United States i) j) keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records availabletotheCertificationDivisionwhenrequested;

takeappropriateactionwithrespecttosuchcomplaintsandanydeficienciesfoundin productsorservicesthataffectcompliancewiththerequirementsforcertification;

k) documenttheactionstaken. Thisauthorizationisvaliduntilfurtherwrittennoticefromtheapplicant. SincerelyYours Jenni Chun /GeneralManager Samsung ElectronicsNorth America INC. TEL: +1-973-808-6362 E-mail: j1.chun@samsung.com

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Samsung Electronics Co., Ltd. 19 Chapin Rd., Building D, Pine Brook, New Jersey, 07058 Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name A3L A3LEPP6300 Jenni Chun j1.chun@samsung.com 973-808-6375 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date: September 28, 2020 Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Jenni Chun General Manager a) b) c) d) e) f) g) Applicant Declaration Rev:0.0

19 Chapin Rd., Building D Pine Brook, New Jersey, 07058, United States 28 September 2020 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad, Columbia,MD21046 REQUEST FORCONFIDENTIALITY FCC ID: A3LEPP6300 ToWhomItMayConcern:

PursuanttoSections0.457and0.459oftheCommissionsRules(CFR47),andSection552(b)(4) of the Freedom of Information Act, Samsung Electronics Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public.ThepublicdisclosureofthesemattersmightbeharmfultotheApplicantand provideunjustifiedbenefitstoitscompetitors. WearealsoherebyrequestShortTermConfidentialityfor180daysafterthegrantasoutlined in Public Notice DA 041705. This provision will give Samsung Electronics Co., Ltd temporary confidentiality of commercially sensitive information prior to product release. The requested PermanentandTemporaryConfidentialexhibitsarelistedasfollows:

CONFIDENTIALLIST 1 BlockDiagram Permanent 2 OperationalDescriptions ShortTerm 3 4 5 6 Schematics ExternalPhotos InternalPhotos TestSetupPhotos 7 UserManual TheApplicantunderstandsthatpursuanttoRule0.457,disclosureofthisapplicationandall accompanyingdocumentations,whereapplicable,willnotbemadepublicbeforethedateof theGrantforthisapplication. SincerelyYours, Jenni Chun /GeneralManager Samsung ElectronicsNorth America INC. TEL: +1-973-808-6362 E-mail: j1.chun@samsung.com

Cover Letter-Wireless Charger Approval FCC ID: A3LEPP6300 Date: 25 Sep, 2020 Gentlemen:

Theres a EP-P6300 that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below, EP-P6300, with its designed features and specified description, considers special requirements for KDB 680106 D01 v03 section 5, b) requirements. Company:

Product Name:

Model Number:

FCC ID:

Samsung Electronics Co., Ltd. WIRELESS CHARGER EP-P6300 A3LEPP6300 KDB 680106 D01 v03 Section 5, b) Requirements: Product Technical Specification:

(1) Power transfer frequency is less that 1 MHz Result:

Complied 0.119 ~ 0.122 MHz, 0.126 2 ~ 0.129 2 MHz, 0.136 5 ~ 0.139 5 MHz and 0.144 5 ~ 0.147 5 MHz

(2) Output power from each primary coil is less than or equal 15 watts. 2 Watts, 4.5 Watts, 7.5 Watts and 9 Watts

(3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils The transfer system including a charging system with multiple primary coils are to detect and allow only between individual pairs of coils. Complied Complied

(4) Client device is placed directly in contact with the transmitter Client device is placed directly in contact with the transmitter. Complied Mobile conditions only Complied

(5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion).

(6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. H-Field: 0.600 A/m (at 15 cm)

< 0.815 A/m (50% of the limit) Complied

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Samsung Electronics Co., Ltd. 19 Chapin Rd., Building D, Pine Brook, New Jersey, 07058 Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name A3L A3LEPP6300 Jenni Chun j1.chun@samsung.com 973-808-6375 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date: August 27, 2020 Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Jenni Chun General Manager a) b) c) d) e) f) g) Applicant Declaration Rev:0.0

Cover Letter-Wireless Charger Approval FCC ID: A3LEPP6300 Date: 27 Aug, 2020 Gentlemen:

Theres a EP-P6300 that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below, EP-P6300, with its designed features and specified description, considers special requirements for KDB 680106 D01 v03 section 5, b) requirements. Company:

Product Name:

Model Number:

FCC ID:

Samsung Electronics Co., Ltd. WIRELESS CHARGER EP-P6300 A3LEPP6300 KDB 680106 D01 v03 Section 5, b) Requirements: Product Technical Specification:

(1) Power transfer frequency is less that 1 MHz Result:

Complied 0.136 5 ~ 0.139.5 MHz and 0.144 5 ~ 0.147.5 MHz

(2) Output power from each primary coil is less than or equal 15 watts. 7.5 Watts

(3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils The transfer system including a charging system with multiple primary coils are to detect and allow only between individual pairs of coils. Complied Complied

(4) Client device is placed directly in contact with the transmitter Client device is placed directly in contact with the transmitter. Complied Mobile conditions only Complied

(5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion).

(6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. H-Field: 0.666 A/m (at 15 cm)

< 0.815 A/m (50% of the limit) Complied Sincerely, By:

Title:

Technical Manager

(Signature1) Hyunchae You

(Print name) On behalf of:

Telephone:

SGS Korea Co., Ltd.

+82-31-428-0903

(Company Name)

SamsungElectronicsCo.,Ltd. 129,Samsungro,Yeongtonggu Suwonsi,Gyeonggido,16677,RepublicofKorea 28September2020 DISMISSALREQUEST We,SamsungElectronicsCo.,Ltd.,asamanufactureroffollowingmodels,herebyrequestdismissalof bothFCCIDandISEDCertificateoffollowingmodel. FCCID:

GrantDate:

A3LEPP6300 1September2020 649EEPP6300 11September2020 ISEDCertificationNumber:

ApprovalDate:

Producthasbeenmodifiedandnewfrequencieshavebeenadded.Thisdevicehasnotbeenmarketed orsoldintheUnitedStatesoranywhereintheworldbaringtheFCCID. SincerelyYours, JenniChun GeneralManager SamsungElectronicsCo.,Ltd.

SAMSUNG CONFIDENTIAL C2 3-R1.0 WIRELESS CHARGER 9.0 V 2.77 A MODEL : EP-P6300 INPUT :

FCC ID : A3LEPP6300 IC : 649E-EPP6300 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. 0

. 4 2 S/N :

MADE IN VIETNAM / FABRIQU AU VIETNAM 36.0

< 1:1 Artwork >

< 1:1 Artwork >

S/N: 14 3

. 5 5.3 5

. 6 2 4

. 7 1

. 3 2.0 2.0 0

. 3 ROLLING Technical Description 1. Use AI / PDF provided by SAMSUNG for letter and contents 2. Background color is BLACK, letter color is WHITE

(reverse for SAMSUNG LOGO) 3. Back side should be attached to release paper once adhesive is applied. 4. No letter should be blur/smeared 5. The production must be proceed after the approval of SAMSUNG R&D Group 6. The product must be within approved sample's specification tolerance. 7. The product must be finished in a ROLL 8. Release paper must be unifiedn for material and color(blue) 9. Do not contain any substances which are specified in (OQA-2049). HS-P800 MZ1081B 40 White PP 80 Adhesive 20

(0.14T0.01) EP-P6300 USA_BLK Jungmin Lee Jinhyuk Ahn Vendor 200804 200804