HDL50A Quick Start Guide - Front Size: 432 x 140 mm Printing Color: Black Matl: 100 gsm WF paper May 30, 13. (For Finemost) HDL50A Sta Quick Start Guide Remove thumbscrew and remove back cover to access sta controls Set Up Included HDL50A system 100V-240V universal AC adaptor Connect AC adaptor to DC jack/wall outlet outlet 12V 3.5A DC 12V 3.5A time set time sync time zone
-1 +1 auto DST Remove pull tab from Backup Battery Compartment located on bottom of the unit. When Low Battery Icon appears on display, replace backup battery with 1 fresh CR2450 battery. Keep unit connected to AC power when replacing battery or you will lose settings. WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, re, or high temperatures. Do not place loose batteries in a pocket, purse, or other container containing metal objects, mix with used or other battery types, or store with hazardous or combustible materials. Store in cool, dry, ventilated area. Follow applicable laws and regulations for transport and disposal. HDL50A Quick Start Guide - Inside Size: 432 x 140 mm Printing Color: Black Matl: 100 gsm WF paper May 30, 13. (For Finemost) Manual Clock Setting NOTE: Time display can be set to 12 or 24 hours at any time during clock setting Press the or button to set year To toggle time display between 12 or 24 hours, press the alarm set button during clock setting alarm set Clock Setting Press and hold the Time Set Button to enter clock setting mode time set 2 SECS Press the or button to set time Press the Time Set Button time set Press the Time Set Button time set Press the or button to set date Press the Time Set Button to conrm Clock Setting time set Beep Beep Secure the attached Security Tether to a wall or other permanent surface. CAUTION: DO NOT attach to an AC outlet or cause it to become entangled with anything that can create a hazardous situation. Setting Clock Using Time Sync a) Connect a Lightning-compatible iPhone to the Dock a Or b) connect any iPhone to the USB port using the USB cable that came with the iPhone b Press the Time Sync Button on the back of the unit to instantly set the time on the HDL50A. time sync NOTE: For the fastest, most accurate time setting, set the clock using Time Sync with a) a docked iPhone OR b) an iPhone connected to the USB port iPhone time is always current because it pings o cell towers;
iPad or iPod are only accurate to the last time they were synced to a computer. Make sure the DST switch is in AUTO position. If you do not have an iPhone or if time sync fails, set the clock manually. Daylight Saving Time
-1 +1 auto DST The unit ships with the Daylight Saving Time (DST) switch in Auto position, and will automatically adjust when the time changes in March and November. talk FM presets pairing alarm set alarm on/o to use Bluetooth 1- place your device into discoverable mode 2- press and holdpairing button on unit for 2 sec 3- if prompted, enter code 0000 4- your device is now paired. You can answer and end calls by pressing talk and end function wake-to power iPod/USB/radio Bluetooth/line-in end snooze/dimmer to use alarm 1- press alarm set button 2- use </> to set desired wake-up time 3- press alarm set button again to confirm 4- press wake-to button to switch between waking to your iPod, USB dock, radio, or buzzer FM Radio Press function Button as needed to cycle to FM mode function iPod/USB/radio Bluetooth/line-in Press the or button to tune to a desired station (hold to search for next clear station) FM Presets Press FM presets Button to cycle to the preset
(P1- P6) you wish to set FM presets Press and hold FM presets Button to conrm preset number 2 SECS FM presets Press the or button to select station to preset Press FM presets Button to conrm FM presets Beep Beep Follow steps above to set all 6 FM presets Extend FM antenna for best reception Once sta has completed setup, replace security cover on back of unit and tighten thumbscrew. Maintenance Place the unit on a level surface away from sources of direct sunlight or excessive heat. Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as thinner or similar materials can damage the surface of the unit. HDL50AQSG-053013-A 2013 HTI Industries, LLC. All rights reserved Printed in China