Insert batteries 05 Follow on-screen setup 06 Other Connections Hints and Tips
*For remote control, Do not mix old and new batteries and Do not mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries. Follow the instructions on your TV screen to set up your 32" 2.0 Soundbar. Roku TV | Set up with Roku TV Ready 10:05 am | Options *
Lets set up your onn. 322.0 Soundbar Please use your existing Roku TV remote for setup. To read the Privacy Policy & Terms of Use, press * on your remote. Continue
<30ft / 9m Settings Bluetooth VOL VOL TALK HDMI MUSIC MOVIE 2 1 Bluetooth DEVICES 3 onn.32" Soundbar Connected Now Discoverable
*If your TV without HDMI ARC jack, you can also connect your TV with soundbar by other connections (Optical, Bluetooth, Aux or USB). disconnected status. If you have a problem, check the following table for tips:
When you switch to another channel, the Bluetooth is disconnected. When the LED indicator is flashing, the Bluetooth is in When the LED indicator is solid, the Bluetooth is connected The Soundbar will automatically switch to standby mode when no audio input is received for over 20 minutes, and wake up automatically with any source input again. Problem No power Remote Not Working Optical Not working Solution Make sure the main power cords are connected at both ends. Make sure that the mode is selected. On Move closer to the unit. Point the remote directly at the units sensor. Try new batteries in the remote control. Remove anything blocking the units sensor.
(A) try setting the TV/Display output to PCM or
(B) Connect directly to your Blu-ray/ other source, some TV/Display do not pass through digital audio. If the unit doesnt function correctly, unplug it, wait 30 seconds, and plug it back in. June 02, 2021_V1 Wed love to hear from you. Scan with your Walmart app and let us know what you think. 100056522 6 8113 1 4137 5 6 Roku TV Ready and the Roku TV Ready logo are trademarks of Roku, Inc. The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. 32" 2.0 Soundbar Quick Start Guide Whats in the Box?
Check to make sure you have everything below. L O V L O V K L A T I E V O M I C S U M I M D H 1 2 3 4 5 6 7 8 WALL MOUNTING TEMPLATE Quick Start Guide 1. Soundbar 2. Remote control 3. AAA batteries 4. Power cable 5. HDMI cable 6. Wall mounting kit 7. Wall mounting template 8. Quick Start Guide Get to Know Your 32" 2.0 Soundbar Adjust TV settings 01 Connect to power 02 Connect to Your TV 03 Select input 04 Front Back Red: Standby mode Green: Optical source White: Aux in source Blue: Bluetooth mode Yellow:HDMI mode Purple: USB Source 1 OR Have a Roku TV?
Simply use the remote that came with your Roku TV and follow steps 2 and 3. The rest is automatic, even linking your Roku account. All other TVs You may need to enable your TVs HDMI-CEC and ARC settings. Power cable Use the included power cable to connect your 32" 2.0 Soundbar to a wall outlet. TIP:
Place your 32" 2.0 Soundbar at the front edge of your TV stand for the best sound experience. 2 3 54 6 7 2 8 9 10 11 Status indicator 1. 2. Wall mount 3. HDMI(ARC) 4. Aux in 5. USB 6. Optical 7. Power 8. Power on / off 9. Source 10. Volume up 1 1. Volume down Controls HDMI
(ARC) HDMI Input Antenna A/V 1 HDMI 1 HDMI 2 HDM I Use the remote that came with your TV to select the HDMI input (source) you used to connect your 32" 2.0 Soundbar. Connect your 32" 2.0 Soundbar to the HDMI port on your TV labeled ARC with the included cable. Dont see an HDMI-ARC port?
Use the included optical cable along with the HDMI Cable to connect.
10~50mm-0.2/+0.3mm50~150mm-0.5/+1mm 150mm-1/+1.5mm 2RoHS2.0ReachWEEE 360-2093%
24 20210616 GM2100405
570X108mm(),190X108mm() SB2128 12.005.0004.05142
128G Onn. 100056522
A0
2
//AB
A/0 2.0 Soundbar Model:100056522 Wall Mounting Template MARK HERE How to Wall-mount the Soundbar 1. Place the included wall mounting template against to the wall. Mark the two bracket holes using a pencil (not included). 2. Put the screws into the plastic brackets. Fasten the screws and screw brackets to the wall on the bracket holes. Screw Size: 47 x 4mm (1.85 x 0.157inch) Screw Bracket Size40 x 8mm (1.575 x 0.315inch) 3. Hang the soundbar on the screws. 2.0 Soundbar Model:100056522 Wall Mounting Template MARK HERE 668.7mm(26.327inch) MARK HERE 11 2 3~4mm (0.118~0.157inch) WALL LEGAL & COMPLIANCE 1. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compli-
ance could void the users authority to operate the equipment. 2. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequen-
cy energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 3. RF Exposure Statement To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions The safety and operating instructions should be retained for future reference. 3. Heed all warnings All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions All operating and use instructions should be followed. 5. Do not use this apparatus near water The appliance should not be used near water or moisture for example, in a wet basement or near a swimming pool, and the like. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. IMPORTANT SAFETY INSTRUCTIONS 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over. 13. Unplug the apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc. 16. WARNINGTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. 17. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable. 18. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. IMPORTANT SAFETY INSTRUCTIONS 19.
- This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
- Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
- The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. 20.The equipment shall be used at maximum 35 degree C ambient temperature. 21. WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 4.0mm 4 7 m m MARK HERE IMPORTANT SAFETY INSTRUCTIONS 22. Batteries should not be exposed to excessive heat such as sunshine, fire, or the like. WARNING: Danger of explosion if the remote control batteries are incorrectly replaced. Replace only with the same or equivalent type. 23. Keep new and used batteries away from children. 24. If the battery compartment does not close securely, stop using the product and keep it away from children. 25. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. 26. The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. 800x80mm folding to 160x80mm 31.5x3.15in folding to 6.3x3.15in
SB2128 12.005.0004.05141
80g 10~50mm-0.2/+0.3mm50~150mm-0.5/+1mm 150mm-1/+1.5mm 2RoHS2.0ReachWEEE 360-2093%
24 Onn. A0 100056522
5
//AB
20210618 GM2100405
800X80mm() 160x80mm() A/0 v