FCC ID: HBOSB2135 36inch 2.1 Soundbar

Remote Control Battery Replacement

Bluetooth® Connection

Hints and Tips

<30ft / 9m

Settings

Bluetooth

STANDARD

SOUND

MODE

1

2

Bluetooth

DEVICES

3

onn. 36” Soundbar

Connected

Now Discoverable

For remote control, Do not mix old and new

*

batteries and Do not mix alkaline,

standard (carbon-zinc) or rechargeable

(ni-cad, ni-mh, etc.) batteries.

If you have a problem, check the following table for tips:

• When you switch to another channel, the Bluetooth is

disconnected.

• When the LED indicator flashes slowly, the Bluetooth is paired

and in disconnected status.

• When the LED indicator is solid, the Bluetooth is connected.

• The Soundbar will automatically switch to standby mode when

no audio input is received for over 20 minutes, and wake up

automatically with any source input again.

Problem

No power

Solution

• Make sure the main power cords are connected

at both ends.

• Make sure that the mode is selected.

On

Remote

Not Working

• Move closer to the unit.

• Point the remote directly at the unit’s sensor.

• Try new batteries in the remote control.

• Remove anything blocking the unit’s sensor.

If the unit doesn’t function correctly, unplug it, wait 30 seconds,

and plug it back in.

The Fine Print

1. Warning: Changes or modifications to this unit not expressly

approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

2. NOTE: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

3. RF Exposure Statement

To maintain compliance with FCC’s RF Exposure guidelines, This

equipment should be installed and operated with minimum distance

between 20cm the radiator your body: Use only the supplied antenna.

Need help? We're here for you every day 7 a.m. – 9 p.m. CST.

1-888-516-2630 Give us a call!

We’d love to hear from

you. Scan with your

Walmart app and let us

know what you think.

100024204

36'' 2.1 Soundbar

Quick Start Guide

What’s in the Box?

Check to make sure you

have everything below.

Get to Know Your 36” 2.1 Soundbar

Get to Know Your Remote Control

Let’s Get Started!

Here’s what you’ll need

to get set up:

HDMI Connection

1

2

3

4

5

D

N

U

O

S

E

D

O

M

D

R

A

D

N

A

T

S

6

7

8

Front

Red: Standby mode

Green: Optical source

White: Aux in source

Blue: Bluetooth mode

Yellow：HDMI source

1

Back

2

3 4 5 6

9

2.1 SOUNDBAR

WALL MOUNTING TEMPLATE

10

11

100024204

We’d love to hear from

you. Scan with your

Walmart app and let us

know what you think.

36'' 2.1 Soundbar

Quick Start Guide

36“ 2.1 soundbar

Model: 100024204

PRODUCT GUIDE

We ‘d love to hear from you. Scan with your Walmart app and let us know what you think.

December 14, 2020_V1

2

1. Status indicator

2. Wall mount

3. HDMI(ARC)

4. Optical

5. Aux

6. Power

7. Volume up

8. Volume down

9. Source

10. Power on / off

7

8

9

10

1. Soundbar

2. Remote control

3. AAA batteries

4. 3.5 mm AUX cable

5. Optical cable

6. Power cable

7. HDMI cable

8. Wall mounting kit

9. Wall mounting template

10. Quick Start Guide

11. Product Guide

Controls

Remote control

1

2

3

4

5

6

7

8

Ruler

9

10

11

12

13

1. Power on / off

2. Bluetooth

3. Volume up

4. Previous track

5. Volume down

6. Standard mode

7. Bass down

8. Source

9. Mute

10. Next track

11. Play / Pause

12. Sound mode

(Music/Movie/Talk)

13. Bass up

STANDARD

SOUND

MODE

Drill

TV

Screwdriver

Level

Computer, Tablet or

Smartphone

Tips of HDMI Connection

- To enjoy Dolby Audio content, your TV must support

the HDMI-CEC and Audio Return Channel (ARC)

function. Enable CEC and ARC functions on your TV.

- The setting method of CEC and ARC may differ by

TV manufacturer. See your TV’s user manual for

more information.

- If you want to use the volume buttons on the TV

remote control to control the soundbar, enable

System Audio Control from the CEC menu.

- CEC Function naming may differ by TV manufacturer.

See your TV’s user manual for more information.

- Only HDMI 1.4 compatible cables can support the

ARC function.

* If your TV without HDMI ARC jack, you can also

connect your TV with soundbar by other

connections (Optical, Bluetooth or Aux in).

* For other connections, please refer to Product Guide.

Power cable

HDMI cable

T V

45 Model: 100024204 FCC ID: HBOSB2135 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Input :100-240V~50/60Hz 0.5A 30 Walmart Inc. 2034A Made in China Model: 100024204 FCC ID: HBOSB2135 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Input :100-240V~50/60Hz 0.5A Walmart Inc. 2034A Made in China

SHENZHEN FENDA TECHNOLOGY CO., LTD Agent Authorization Company: SHENZHEN FENDA TECHNOLOGY CO., LTD Address: Fenda Hi-Tech Park, Zhoushi Road, Shiyan Town, Baoan District, Shenzhen City, Guangdong, China. Product Name: 36'' 2.1 Soundbar Model Number(s): 100024204 Product Description: 36'' 2.1 Soundbar We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2021/01/26 Name:

frank Chenzhonghua Title:

engineer Company: SHENZHEN FENDA TECHNOLOGY CO., LTD

< SHENZHEN FENDA TECHNOLOGY CO., LTD>

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021/01/26 Subject; Request for Confidentiality FCC ID: HBOSB2135 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: frank Chenzhonghua Title: engineer Email: frank.chenzhonghua@fenda.com