FCC ID: HBONSHBTSS116A Bluetooth Shelf Speakers

NS-HBTSS116_21-0309_QSG_V4_EN.ai 1 3/17/2021 1:58:40 PM NS-HBTSS116_21-0309_QSG_V4_EN.ai 1 3/17/2021 1:58:40 PM QUICK SETUP GUIDE Bluetooth Shelf Speakers NS-HBTSS116 PACKAGE CONTENTS Speakers (2) 3.5mm audio cable RCA cable Speaker Wire Remote control with batteries Quick Setup Guide FEATURES Wirelessly stream from any Bluetooth device Volume, treble, and bass controls on the side panel NFC for easy Bluetooth paring High efficient energy saving design for low power consumption FIND YOUR USER GUIDE ONLINE!

Go to www.insigniaproducts.com, then click Support & Service. Enter NS-HBTSS116 in the box under Manual, Firmware, Drivers & Product Information, then click . Before using your new product, please read these instructions to prevent any damage. OVERVIEW Standby/source

1 2 3 4 5 ITEM DESCRIPTION Volume/

Source knob Press repeatedly to cycle through the available modes

(AUX [default], RCA, and Bluetooth). Hold down to turn on your speakers and to put your speakers in standby mode. Turn clockwise to increase the volume and turn counterclockwise to decrease the volume. Treble knob Bass knob On/Off switch Indicator LED Adjusts the treble level. Adjusts the bass level. Turns the power on or off. Indicates the mode (Standby, AUX, and RCA) and pairing status of the speakers. Remote control POWER MUTE SOURCE AUX RCA VOL NS-HBTSS116RC DESCRIPTION Press to turn on standby mode. Press to enter AUX mode. The green LED indicator light blinks slowly. Press to select the previous song while in Bluetooth mode. Press to mute or unmute the sound. Press to enter RCA mode. The green LED indicator lights solid. Press to enter Bluetooth mode. The blue LED indicator turns on. When in Bluetooth mode, press and hold to enter pairing mode. Press to select next song while in Bluetooth mode. Press to play/pause while in Bluetooth mode. Turns the volume up. Turns the volume down.

1 2 3 4 5 6 ITEM POWER AUX Previous MUTE RCA Bluetooth mode Play/Pause Next 7 8 9 VOL +

10 VOL -

RECONNECTING TO A PAIRED DEVICE When your speaker is not paired to a device, the LED blinks blue slowly. Your speaker loses the Bluetooth connection if you... Turn off your speaker. To reconnect... Turn on your speaker. Your speaker searches for the last connected Bluetooth device and reconnects. Move the Bluetooth device out of range. Make sure that your Bluetooth device is within 33 feet of your speaker. Turn off your Bluetooth device. Turn off Bluetooth on your Bluetooth device. Connect your Bluetooth device to another Bluetooth device. Turn on your Bluetooth device, then make sure that Bluetooth is on. Turn on Bluetooth on your Bluetooth device. Disconnect your Bluetooth device from the other Bluetooth device, then set your device to pairing mode. Select NS-HBTSS116 on your Bluetooth device. PAIRING A BLUETOOTH DEVICE SUPPORTING NFC If your Bluetooth device supports Near Field Communication (NFC), make sure that the NFC feature is active. Touch the NFC area of your Bluetooth device to the top of your NS-HBTSS116 speaker in order to automatically pair. Note: If your phone has NFC support but it is running an OS below Android 4.1, you will need to download an NFC Bluetooth APP from Google play or a similar online store. LISTENING TO MUSIC 1 Press the Volume/Source knob on your speaker, then connect to your Bluetooth device. 2 Begin playback on your Bluetooth device. 3 Adjust the volume on your speaker by pressing the

+ or - buttons. Note: Use the controls on your Bluetooth device or on the included remote control to control playback. Flat size (WH): 16.58 11.69 in (421.22 296.93 mm.) Final folded size: 4.145 11.69 in (105.305 296.93 mm.) CONNECT THE SPEAKERS Connect the power cable Plug the power cable into a power outlet or surge protector. Connect the speakers Speakers are connected using the speaker wire that is provided. Connect the red wire to the red (+) terminals and the black wire to the black (-) terminals. Use enough wire to position the speakers where you want them. OUTPUT INPUT OUTPUT L R RCA AUX SUB L SPEAKER USB 5V 1A 120V~ 60Hz 0.6A Speaker Wire Power cable TURNING YOUR SPEAKER ON AND OFF Move the ON/OFF switch on the side of your speaker to the ON position. When you first turn on your speakers, the LED blinks GREEN to indicate they are in AUX mode. Switch to Bluetooth mode by pressing the Bluetooth button on the remote, or by pressing the Volume/Source on the speaker twice. When the speakers are in Bluetooth pairing mode, the indicator LED blinks blue. CONNECTING WITH BLUETOOTH 1 Make sure that your Bluetooth device is turned on and within 33 feet (10 meters) of your speaker. 2 On your speaker, press the Volume/Source Knob twice to select Bluetooth. Your speaker enters pairing mode and the LED blinks blue. Note: Press and hold the Volume/Source Knob to return to pairing mode. 3 Turn on your Bluetooth device and turn on Bluetooth. Set your device to pairing mode, then select NS-HBTSS116. See the instructions that came with your Bluetooth device for information about airing. If you are asked for a password, enter 0000. When pairing is complete, the LED lights solid blue. 4 5 To disconnect from the paired Bluetooth device, press and hold the Volume/Source Knob on your speaker for three seconds. Your speaker disconnects from the Bluetooth device and enters pairing mode again. LED Blinks blue Solid blue Solid red Blinks green Solid green DESCRIPTION Speaker is in pairing mode Speaker is paired Standby mode AUX Mode RCA Mode NS-HBTSS116_21-0309_QSG_V4_EN.ai 2 3/17/2021 1:58:40 PM NS-HBTSS116_21-0309_QSG_V4_EN.ai 2 3/17/2021 1:58:40 PM PLAYBACK USING AUX IN OR RCA 1 Insert one end of the input signal cable (RCA/3.5mm AUX) into the input port on back panel and the other end into the output port of your sound source device

(such as a PC, DVD, or MP3 player).

- OR -

Insert one end of a 3.5mm audio cable into the input port on back panel and the other end into the 3.5 mm output port of your sound source device (such as a PC, DVD, or MP3 player). Back of speaker To audio output such as CD/MP3/digital music player USB connector

(charging only) 3.5mm audio cable (included) 2 Press the Volume/Source knob to enter AUX mode. The LED lights green. 3 Start playback on the external device. 4 Press + and to adjust the volume. 5 Control playback using the controls on the audio device. Note: The USB connector is for charging only, not for audio input. TROUBLESHOOTING No power Make sure that your speaker is plugged in. Make sure that your speaker is turned on. No sound or low volume Make sure that your Bluetooth device is turned on, Bluetooth is turned on, and NS-HBTSS116 is selected. Turn up the volume on your speaker. Turn up the volume on your Bluetooth device. Make sure that your Bluetooth device is not muted. Make sure that your speaker is not paired to another Bluetooth device. Make sure that your Bluetooth device is not paired to another Bluetooth device. Cannot establish Bluetooth connection Shorten the distance between your speaker and your Bluetooth device. Turn your devices off, then on. Re-pair your speaker and your Bluetooth device. Make sure that your speaker is not paired to another Bluetooth device. Make sure that your speaker and Bluetooth device are both in pairing mode. Make sure that your Bluetooth device supports Bluetooth v4.0 and below. Make sure that your Bluetooth device is not connected to any other device. Make sure that you have selected NS-HBTSS116 on your Bluetooth device. My Bluetooth device keeps unpairing Shorten the distance between your speaker and your Bluetooth device. If the battery on your Bluetooth device is low, recharge the battery. NS-HBTSS116 does not appear on my Bluetooth device Shorten the distance between your speaker and your Bluetooth device. Put your speaker into pairing mode, then refresh your list of Bluetooth devices. For more information, see the documenta-

tion that came with your Bluetooth device. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions All the safety and operating instructions should be read before this product is operated. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug the apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Never expose the product to fire as this could result in personal injury. Do not store the product in an extremely cold or warm environment. Never dismantle the product. Never let children play with the product. Do not expose the product to dampness or moisture. The product should not be exposed to dripping or splashing. 15. Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc. 16. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. 17. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable. 18. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: SHOCK HAZARD. DO NOT OPEN AVIS:RISQUE DE CHOCELECTRIQUE, NEPAS OUVRIR 19. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

- Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.

- The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. 20. The equipment shall be used at maximum 35 degree C ambient temperature. 21. The battery (battery or batteries of battery pack) shall not be exposed to excessive 2. Keep these instructions The safety and operating instructions should be retained heat such as sunshine, fire or the like. for future reference. 3. Heed all warnings All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions All operating and use instructions should be followed. 5. Do not use this apparatus near water The appliance should not be used near water or moisture for example, in a wet basement or near a swimming pool, and the like. Clean only with dry cloth. 6. 7. Do not block any ventilation openings. Install in accordance with the manufactures instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. 22. WARNING DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD

[The remote control supplied with] This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. LEGAL NOTICES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RSS-102 Statement:

This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. Industry Canada Compliance IC Statement This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. RF Exposure Statement To maintain compliance with the FCCs RF Exposure guidelines. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Use only the supplied antenna. ONE-YEAR LIMITED WARRANTY Visit www.insigniaproducts.com for details. CONTACT INSIGNIA:

For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. 2021 Best Buy. All rights reserved. V4 ENGLISH 21-0309

INPUT L R OUTPUT INPUT OUTPUT RCA AUX SUB L SPEAKER Bluetooth Shelf Speakers Model No: NS-HBTSS116 Manufactured for INSIGNIA Products 7601 Penn Ave South, Richfield, MN 55423 U.S.A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B) USB 5V 1A 120V~ 60Hz 0.6A Avis: Risque de choc electrique - ne pas ouvrir PRECAUCIN RIESGO DE DESCARGA ELCTRICA NO ABRIR HVIN: NS-HBTSS116A FCC ID:HBONSHBTSS116A IC: 10550A-NSHBTSS116A

: 429C 17.5.005.0050 2016-05-12 R31BT gm16304 R31BT 17.5.005.0050 INSIGNIA A0 lihong

Authority to Act as Agent Date: _2021-04-19____ TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern:

I appoint TUV Rheinland (Shenzhen) Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with ___( SHENZHEN FENDA TECHNOLOGY CO., LTD.. and Fenda Hi-Tech Park, Zhoushi Road, Shiyan Town, Baoan District, Shenzhen, China)___. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____ 12 months____ By:

Title:

On behalf of: SHENZHEN FENDA TECHNOLOGY CO., LTD.. _______ Mr frank Chenzhonghua_______ ____ safety engineer _____Telephone +075527486668______

(Signature)

(Print name)

(Company Name) QF094234 Page 1 of 1 Revision 0

Confidentiality Letter Date: 2021-04-19 Subject: Confidentiality Request for FCC ID: HBONSHBTSS116A and IC ID: 10550A-NSHBTSS116A Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Part List/Tune-Up Procedure Schematics Test Setup Photos Users Manual SHENZHEN FENDA TECHNOLOGY CO., LTD. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to

"competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-

1705. Sincerely, By:

(Signature/Title) Mr frank Chenzhonghua

(Print name)