FCC ID: HBOWP912 Wireless Shower Speaker with 5W Driver

Welcome Guide English Contents: Before getting started, ensure the package contains the following components:

B C A F I E G H D 3 A On/off switch B Bluetooth indicator C Battery indicator D Increase volume E Play/pause switch F Decrease volume G AUX IN socket K H USB Micro B port J L I Microphone J Snap hook K USB cable L Suction cup 4 IMPORTANT SAFEGUARDS Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included. When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:

Read these instructions. Keep these instructions. Heed all instructions. To avoid accidental falls into pools, bathtubs or other water containers, do not place it at the edge. 5 Do not install near any heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Refer all servicing to qualified service personnel. No naked flame sources, such as lighted candles, should be placed on the product. To prevent possible hearing damage, do not listen at high volume levels for long periods. Battery Warnings WARNING Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. The battery contained in this product is non-

replaceable. Do not throw the product into a fire. Before disposal the battery must be removed from the product. Contact qualified professional. 6 Do not leave the battery charging for a prolonged period of time when the product is not in use. Do not charge overnight. If the product appears to be bulging or shows other undesirable phenomena (e.g. excess noise), stop using it immediately and contact customer services. Do not cover while charging. Charge this product once every 3 months to avoid shortening its battery life. Batteries produce heat when charging and discharging. If the product becomes too hot to touch, turn it off and unplug it immediately. Charge this product only with a compatible power source from reputable manufacturers e.g. a 5 V If the battery leaks avoid contact with skin and eyes. Rinse affected areas immediately with plenty of clean water, then consult a doctor.

, 1 A power adapter. 7 Symbols Explanation This symbol stands for Conformit Europenne, which means Conformity with EU-directives. With the CE-marking the manufacturer confirms that this product complies with applicable European directives and regulations. Direct current (DC). IPX4 Protected against splashing water from any direction. Do not immerse in water. 8 Intended Use This product is intended for household use only. It is not intended for commercial use. This product is protected against splashing water from any direction. Do not immerse in water. No liability will be accepted for damages resulting from improper use or non-compliance with these instructions. Before First Use Check for transport damages. DANGER Risk of suffocation! Keep any packaging materials away from children these materials are a potential source of danger, e.g. suffocation. 9 Operation NOTICE The product can be attached onto bathroom tiles with the suction cup (L). NOTICE The product can be hooked onto a backpack strap/hoop with the snap hook (J) Charging built-in battery Connect the USB cable (K) to the USB Micro B port (H). Connect the other end of the USB cable (K) to a USB-A port on a computer or a suitable power adaptor 5 V indicator (C) lights up red during charging. 1 A. The battery The product is fully charged when the status indicator (C) turns off. 10 Switching on/off

: Press and hold to switch on/off. NOTICE The product automatically switches off approximately after 15 minutes of inactivity. Pairing mode After switching on, the product goes into a pairing mode automatically. The Bluetooth indicator (B) flashes blue. Activate Bluetooth on the device you wish to pair and search for a new device. Select AmazonBasics WP912 from the list on your device. Once the devices are paired, the Bluetooth indicator (B) lights up blue. 11 Disconnecting Bluetooth Press and hold to disconnect the connected device. The Bluetooth indicator (B) flashes blue. NOTICE The product continuously attempts to reconnect a lost Bluetooth connection. If it cannot, manually reconnect via the devices Bluetooth menu. Auxiliary input mode Connect an 3.5 mm audio cable (not included) to the AUX IN socket (G) and to the desired playback device e.g. MP3 player. Music playback

: Press to play/pause the playback.

: Press and hold to skip to the next track.

: Press and hold to return to the previous track. 12 Calling

: Press to accept/end call.

: Press and hold to reject call. Volume control NOTICE The volume of the playback resets to the medium volume after each start up.

: Press to increase volume.

: Press to decrease volume. 13 Cleaning and Maintenance NOTICE Switch the product off before cleaning. NOTICE During cleaning do not immerse the electrical parts of the product in water or other liquids. Never hold the product under running water. To clean, wipe with a soft, slightly moist cloth. Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product. FCC Compliance Statement 1. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and 14

(2) this device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, 15 which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Canada IC Notice This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and 16

(2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. This Class B digital apparatus complies with Canadian CAN ICES-3(B) / NMB-3(B) standard. Simplified EU Declaration of Conformity Hereby, Amazon EU Sarl declares that the radio equipment type B07RS44KQN, B07RT6B1GN, B07RWDGGSH, B07RS44LV9, B07RT6BDV2 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://www.amazon.co.uk/amazon_private_ brand_EU_compliance 17 Disposal The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimise the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centers in order to conserve natural resources. Each country should have its collection centers for electrical and electronic equipment recycling. For information about your recycling drop off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service. 18 Battery Disposal Do not dispose of used batteries with your household waste. Take them to an appropriate disposal/collection site. Trademarks The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Amazon.com, Inc. or its affiliates is under license. 19 Specifications Power consumption:

5 W Input:

5 V

, 1 A Battery type:

3.7 V Lithium battery, 1000 mAh Charging time:

3 hours Operation frequency:

2402 MHz ~ 2480MHz RF power:

4 dBm Frequency response:

70 Hz to 20 kHz Sensitivity:

Impedance:

Bluetooth version:

-6 dB 4 4.2 Operating range:

32. 8' (10 m) 20 IP rating:

IPX4 Net weight:

approx. 5.5 oz (157 g) Dimensions

(L x W x H):

approx. 4 x 3.5 x 1.6'

(102 x 90 x 41mm) Warranty Information To obtain a copy of the warranty for this product:

US: amazon.com/AmazonBasics/

Warranty UK: amazon.co.uk/basics-warranty US: +1-866-216-1072 UK: +44 (0) 800-279-7234 21 Feedback and Help Love it? Hate it? Let us know with a customer review. AmazonBasics is committed to delivering customer-

driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product. US: amazon.com/review/review-your-

purchases#

UK: amazon.co.uk/review/review-your-

purchases#

US: amazon.com/gp/help/customer/

contact-us UK: amazon.co.uk/gp/help/customer/

contact-us 22 Guide de Dmarrage Franais Contenu: Avant de commencer, veuillez vous assurer que lemballage contient les composants suivants:

B C A F I E G H D 23 A Interrupteur On/Off

(Marche/Arrt) B Voyant Bluetooth C Tmoin de batterie D Augmenter le volume E Touche lecture/pause F Diminuer le volume G Prise AUX IN

(entre auxiliaire) H Port USB MicroB I Microphone J Mousqueton K Cble USB L Ventouse 24 J K L MESURES DE SCURIT IMPORTANTES Veuillez lire attentivement les prsentes instructions et les conserver afin de pouvoir vous y rfrer ultrieurement. En cas de cession de ce produit un tiers, le prsent manuel dutilisation doit galement lui tre remis. Lorsque vous utilisez des appareils lectriques, vous devez toujours prendre des mesures de scurit de base afin de rduire tout risque dincendie, dlectrocution et/ou de blessures corporelles. Ces prcautions incluent notamment les suivantes:

Veuillez lire les prsentes instructions. Veuillez conserver les prsentes instructions. Veuillez respecter l'intgralit des instructions. Pour viter les chutes accidentelles dans les piscines, baignoires ou autres installations contenant de l'eau, ne pas la placer sur le bord. 25 Ne pas installer le produit proximit de sources de chaleur, notamment radiateurs, bouches de chaleur, poles ou tout autre appareil (comprenant les amplificateurs) qui dgage de la chaleur. Confiez tout entretien du produit du personnel qualifi. Aucune source de flamme nue, telle que des bougies allumes, ne doit tre pose sur le produit. Afin de prvenir toute altration ventuelle de l'oue, n'coutez pas de la musique un volume lev de faon prolonge. Avertissements Relatifs aux Batteries AVERTISSEMENT Les batteries ne doivent pas tre exposes une source de chaleur excessive telle que la lumire directe du soleil, le feu ou autre. La batterie contenue dans ce produit nest pas remplaable. Ne pas incinrer le produit. Avant de procder la mise au rebut, la batterie doit tre retire du produit. Contactez un professionnel qualifi. 26 Ne pas laisser la batterie en charge pendant une priode prolonge lorsque le produit n'est pas utilis. Ne pas recharger le produit de nuit. Si le produit semble gonfler ou prsente d'autres phnomnes indsirables (comme un surcrot de bruit), cessez immdiatement de l'utiliser, puis contactez le service clientle. Ne pas couvrir le produit pendant le chargement. Rechargez ce produit une fois tous les 3mois afin de ne pas rduire la dure de vie de sa batterie. Les batteries produisent de la chaleur lors du chargement et du dchargement. Si le produit devient trop chaud au toucher, mettez-le hors tension, puis dbranchez-le immdiatement. Ne rechargez ce produit qu'avec une source d'alimentation compatible provenant dun fabricant rput fiable comme un adaptateur secteur 5V

, 1A provenant dun fabricant rput fiable. En cas de fuite de la pile, vitez tout contact avec la peau et les yeux. Rincez immdiatement et abondamment les zones affectes leau propre, puis consultez un mdecin. 27 Signification des Symboles Ce symbole signifie Conformit Europenne. En apposant le marquage CE, le fabricant confirme que ce produit est conforme aux directives et rglementations europennes en vigueur. Courant continu (CC). IPX4 Protg contre l'eau projete de toutes les directions. Ne pas immerger dans l'eau. 28 Utilisation Prvue Ce produit est exclusivement destin un usage domestique. Il nest pas conu pour un usage commercial. Ce produit est protg contre les projections d'eau provenant de toutes les directions. Ne pas immerger dans l'eau. Toute responsabilit sera dcline en cas de dommages rsultant dune utilisation incorrecte de lappareil ou du non-respect de ces instructions. Avant La Premire Utilisation Vrifiez que le produit ne prsente aucun dommage d au transport. DANGER Risque dtouffement!

Maintenez tous les matriaux d'emballage hors de la porte des enfants. Ces matriaux constituent une source de danger potentiel comme ltouffement. 29 Utilisation REMARQUE Le produit peut tre fix sur les faences de la salle de bains l'aide de la ventouse(L). REMARQUE Le produit peut tre accroch une sangle de sac dos l'aide du mousqueton(J). Chargement de la batterie intgre Branchez le cble USB(K) sur le port USB MicroB(H). Branchez l'autre extrmit du cble USB(K) sur un port USBA d'un ordinateur ou sur un adaptateur secteur 5V 1A appropri. Le voyant de batterie(C) clignote en rouge pendant le chargement. Le produit est compltement recharg lorsque le voyant dtat(C) steint. 30 Mise sous/hors tension

: Pressez et maintenez press pour mettre sous/hors tension. REMARQUE Le produit s'teint automatiquement aprs environ 15minutes d'inactivit. Mode appariement Aprs la mise sous tension, le produit passe automatiquement en mode appariement. Le voyant Bluetooth(B) clignote en bleu. Activez la fonction Bluetooth sur l'appareil que vous souhaitez apparier, puis recherchez un nouveau priphrique. Slectionnez AmazonBasics WP912 partir de la liste prsente par votre appareil. Une fois les appareils apparis, le voyant Bluetooth(B) s'allume en bleu. 31 Dconnexion du Bluetooth Pressez et maintenez press pour dconnecter lappareil appari. Le voyant Bluetooth(B) clignote en bleu. REMARQUE Le produit tente continuellement de rtablir une connexion Bluetooth perdue. S'il n'y parvient pas, rtablissez manuellement la connexion via le menu Bluetooth de l'appareil. Mode entre auxiliaire Branchez un cble audio avec jack de 3,5mm

(non fourni) entre la prise AUXIN(G) et le lecteur choisi comme un lecteur MP3. Lecture de musique

: Pressez pour lire ou mettre en pause la lecture.

: Pressez et maintenez press pour passer la piste suivante. piste prcdente.

: Pressez et maintenez press pour passer la 32 Appels

: Pressez pour prendre ou clore un appel.

: Pressez et maintenez press pour rejeter un appel. Commande de volume REMARQUE Le volume de la lecture est ramen au volume intermdiaire aprs chaque dmarrage.

: Pressez pour augmenter le volume.

: Pressez pour rduire le volume. 33 Nettoyage et Entretien REMARQUE Mettez le produit hors tension avant le nettoyage. REMARQUE Pendant le nettoyage, ne pas plonger les composants lectriques du produit dans leau ni dans tout autre liquide. Ne jamais exposer le produit leau courante. Nettoyez le produit en lessuyant laide dun chiffon doux lgrement humide. Ne jamais utiliser de dtergents corrosifs, de brosses mtalliques, de lavettes abrasives ou dustensiles tranchants ou en mtal pour nettoyer le produit. nonc dIndustrie Canada (IC) Cet appareil est conforme aux normes RSS dIndustrie Canada. Son utilisation est soumise aux deux conditions suivantes :

(1) Cet appareil ne doit pas provoquer dinterfrences, et 34

(2) Cet appareil doit accepter toutes les interfrences reues, y compris celles susceptibles dengendrer un dysfonctionnement. Cet appareil numrique de Classe B est conforme la norme canadienne CAN ICES-3(B)/NMB-3(B). Dclaration UE de Conformit Simplifie Le soussign, Amazon EU Sarl, dclare que lquipement radiolectrique du type B07RS44KQN, B07RT6B1GN, B07RWDGGSH, B07RS44LV9, B07RT6BDV2 est conforme la directive 2014/53/EU. Le texte complet de la dclaration UE de conformit est disponible ladresse internet suivante : https://www.amazon.fr/marque-

privee-amazon-conformite-EU 35 Mise Au Rebut La directive relative aux dchets dquipements lectriques et lectroniques (DEEE) vise rduire au minimum limpact des produits lectriques et lectroniques sur lenvironnement, en augmentant la rutilisation et le recyclage et en rduisant la quantit de DEEE mis en dcharge. Le symbole figurant sur ce produit ou sur son emballage signifie que ce produit doit tre mis au rebut sparment des ordures mnagres ordinaires en fin de vie. Gardez lesprit que la responsabilit vous incombe de mettre au rebut les quipements lectroniques dans des centres de recyclage afin de contribuer la prservation des ressources naturelles. Chaque pays doit disposer de centres de collecte ddis au recyclage des quipements lectriques et lectroniques. Pour plus dinformations sur les zones de recyclage de votre localit, veuillez contacter les autorits responsables de la gestion des dchets dquipements lectriques et lectroniques de votre commune, votre mairie ou le service local de traitement des ordures mnagres. 36 Mise au Rebut des Batteries Ne mettez pas au rebut les batteries usages avec vos dchets mnagers. Dposez-les un point de collecte appropri. Marques Le nom et les logos Bluetooth sont des marques commerciales enregistres appartenant Bluetooth SIG, Inc. et toute utilisation desdites marques par Amazon.com, Inc. ou ses filiales leur est concde sous licence. 37 Caractristiques Consommation lectrique: 5W Entre:

5V

, 1A Type de batterie:

Batterie 3,7V au lithium, 1000mAh Temps de chargement:

3heures Frquence de fonctionnement:

2402MHz ~ 2480MHz Puissance de RF:

4dBm Rponse en frquence:

de 70Hz 20kHz Sensibilit:

Impdance:

Version Bluetooth:

Porte de fonctionnement:

38

-6dB 4 4.2 32, 8 (10m) Indice de protection:

IPX4 Poids net:

Dimensions

(Lx lx H):

env.5,5 oz (157g) env. 4 x 3,5 x 1,6

(102x90x41mm) Informations Sur La Garantie Pour obtenir une copie de la garantie portant sur ce produit :

FR : amazon.fr/basics-garantie CA : amazon.ca/AmazonBasics/

Warranty FR : +33 (0) 800-947-715 CA : +1-877-586-3230 39 Vos Avis et Aide Vous ladorez? Vous le dtestez? Faites-le nous savoir en laissant un commentaire. AmazonBasics sengage vous offrir des produits axs sur les besoins de la clientle et rpondant vos normes leves. Nous vous encourageons rdiger un commentaire visant partager vos expriences sur le produit. FR : amazon.fr/review/review-your-

purchases#

CA : amazon.com/review/review-your-

purchases#

FR : amazon.fr/gp/help/customer/

contact-us CA : amazon.ca/gp/help/customer/

contact-us 40 Bedienungsanleitung Deutsch Inhalt: Bevor Sie beginnen, prfen Sie, ob die Verpackung die folgenden Teile enthlt:

B C A F I E G H D 41 J K A Ein-/Ausschalter B Bluetooth-Anzeige C Akku-Anzeige D Lautstrke erhhen E F Wiedergabe/Pause-

Schalter Lautstrke verringern G AUX-IN-Buchse H Micro-USB-B-Anschluss I Mikrofon J Karabinerhaken K USB-Kabel L Saugnapf L 42 WICHTIGE SICHERHEITSHINWEISE Lesen Sie diese Anweisungen sorgfltig durch und bewahren Sie sie zur knftigen Verwendung auf. Wenn dieses Produkt an Dritte weitergegeben wird, muss diese Gebrauchsanweisung beigefgt werden. Bei der Verwendung von Elektrogerten sollten immer grundlegende Sicherheitsmanahmen befolgt werden, um die Gefahr von Feuer, Stromschlag und/oder Verletzungen zu reduzieren, einschlielich der folgenden:

Lesen Sie diese Anleitung. Bewahren Sie diese Anleitung auf. Beachten Sie alle Anweisungen. Stellen Sie das Gert nicht am Rand ab, um ein versehentliches Herunterfallen in Pools, Badewannen oder andere Wasserbehlter zu vermeiden. 43 Installieren Sie das Produkt nicht in der Nhe von Wrmequellen wie Heizkrpern, Wrmespeichern, fen oder anderen Gerten

(einschlielich Verstrkern), die Hitze erzeugen. berlassen Sie alle Wartungsarbeiten qualifizierten Fachleuten. Es drfen keine offenen Feuerquellen, wie z.B. Kerzen, auf dem Produkt positioniert werden. Um einem mglichen Hrschaden vorzubeugen, hren Sie nicht fr lngere Zeit bei hoher Lautstrke. Akkuhinweise WARNUNG Akkus drfen keiner extremen Hitze wie z.B. Sonneneinstrahlung, Feuer oder hnlichem ausgesetzt werden. Der in diesem Produkt enthaltene Akku ist nicht auswechselbar. Werfen Sie das Produkt nicht in Feuer. Vor der Entsorgung muss der Akku aus dem Produkt entfernt werden. Wenden Sie sich an einen qualifizierten Fachmann. 44 Laden Sie den Akku nicht fr einen lngeren Zeitraum, wenn das Produkt nicht verwendet wird. Laden Sie das Produkt nicht ber Nacht. Wenn sich das Produkt wlbt oder andere unerwnschte Erscheinungen auftreten

(z.B. bermige Geruschbildung), stellen Sie die Verwendung sofort ein und kontaktieren Sie den Kundendienst. Decken Sie das Produkt whrend des Ladevorgangs nicht ab. Laden Sie das Produkt alle 3Monate auf, um eine Verkrzung der Akku-Lebensdauer zu verhindern. Akkus erzeugen beim Laden und Entladen Wrme. Wenn das Produkt zu hei wird, um es zu berhren, schalten Sie es sofort aus und ziehen Sie das Ladekabel. Laden Sie dieses Produkt nur mit einer kompatiblen Stromquelle von namhaften Herstellern, z.B. mit einem 5V 1A-Netzadapter.

, 45 Wenn der Akku ausluft, vermeiden Sie den Kontakt mit Haut und Augen. Splen Sie betroffene Stellen unverzglich mit viel klarem Wasser ab und suchen Sie einen Arzt auf. Erluterung der Symbole Dieses Symbol steht fr Conformit Europenne. Dies bedeutet bereinstimmung mit EU-

Richtlinien. Durch die CE-Markierung besttigt der Hersteller, dass dieses Produkt mit einschlgigen europischen Richtlinien und Verordnungen konform ist. Gleichstrom (DC). IPX4 Geschtzt gegen Spritzwasser aus allen Richtungen. Nicht in Wasser eintauchen. 46 Verwendungszweck Dieses Produkt ist nur fr den Hausgebrauch vorgesehen. Es ist nicht zur gewerblichen Nutzung vorgesehen. Dieses Produkt ist gegen Spritzwasser aus allen Richtungen geschtzt. Nicht in Wasser eintauchen. Es wird keine Haftung fr Schden aufgrund unsachgemer Verwendung oder Missachtung dieser Bedienungsanleitung bernommen. Vor der ersten Verwendung berprfen Sie das Produkt auf Transportschden. GEFAHR Erstickungsgefahr! Halten Sie Verpackungsmaterialien von Kindern fern solche Materialien stellen Gefahrensituationen fr Kinder, u.a. durch Erstickung, dar. 47 Verwendung HINWEIS Das Produkt kann mit dem Saugnapf (L) an Badezimmerfliesen befestigt werden. HINWEIS Das Produkt kann mit dem Karabinerhaken (J) an einem Rucksacktrger/-

riemen befestigt werden. Eingebauten Akku aufladen Schlieen Sie das USB-Kabel (K) an den Micro-USB-B-Anschluss (H) an. Schlieen Sie das andere Ende des USB-

Kabels (K) an einen USB-A-Anschluss eines Computers oder an ein geeignetes Netzteil mit 5V whrend des Ladevorgangs rot. 1A an. Die Akku-Anzeige (C) leuchtet Das Produkt ist vollstndig aufgeladen, wenn die Statusanzeige (C) erlischt. 48 Ein-/Ausschalten

: Gedrckt halten, um das Gert ein-/auszuschalten. HINWEIS Nach etwa 15Minuten Inaktivitt schaltet sich das Produkt automatisch aus. Kopplungsmodus Nach dem Einschalten wechselt das Produkt automatisch in den Kopplungsmodus. Die Bluetooth-Anzeige (B) blinkt blau. Aktivieren Sie Bluetooth auf dem Gert, das Sie mit dem Produkt koppeln mchten, und suchen Sie nach einem neuen Gert. Whlen Sie AmazonBasics WP912 aus der Liste auf Ihrem Gert. Sobald die Gerte gekoppelt sind, leuchtet die Bluetooth-Anzeige (B) blau. 49 Bluetooth-Verbindung trennen Halten Sie zu trennen. Die Bluetooth-Anzeige (B) blinkt blau. gedrckt, um die Verbindung zum Gert HINWEIS Das Produkt versucht stndig, eine unterbrochene Bluetooth-Verbindung wiederherzustellen. Wenn dies nicht mglich ist, stellen Sie die Verbindung manuell ber das Bluetooth-Men des Gertes wieder her. Aux-In-Modus Schlieen Sie ein 3,5-mm-Audiokabel (nicht im Lieferumfang enthalten) an die AUX-IN-Buchse (G) und an das gewnschte Wiedergabegert an, z.B MP3-Player. Musikwiedergabe

: Drcken, um die Wiedergabe zu starten/zu unterbrechen. wechseln. wechseln. 50

: Gedrckt halten, um zum nchsten Titel zu

: Gedrckt halten, um zum vorherigen Titel zu Anruf beenden.

: Drcken, um einen Anruf anzunehmen/zu

: Gedrckt halten, um einen Anruf abzuweisen. Lautstrkeregler HINWEIS Die Lautstrke der Wiedergabe wird nach jedem Start auf die mittlere Stufe zurckgesetzt.

: Drcken, um die Lautstrke zu erhhen.

: Drcken, um die Lautstrke zu verringern. 51 Reinigung und Pflege HINWEIS Schalten Sie das Produkt vor der Reinigung aus. HINWEIS Tauchen Sie die elektrischen Teile des Produkts whrend der Reinigung nicht in Wasser oder andere Flssigkeiten ein. Halten Sie das Produkt nicht unter flieendes Wasser. Verwenden Sie zur Reinigung ein weiches, leicht angefeuchtetes Tuch. Verwenden Sie keine tzenden Reinigungsmittel, Drahtbrsten, Scheuermittel, Metall oder scharfe Materialien, um das Produkt zu reinigen. Vereinfachte EU-

Konformittserklrung Hiermit erklrt Amazon EU Sarl, dass der Funkanlagentyp B07RS44KQN, B07RT6B1GN, B07RWDGGSH, B07RS44LV9, B07RT6BDV2 der Richtlinie 2014/53/EU entspricht. 52 Der vollstndige Text der EU-

Konformittserklrung ist unter der folgenden Internetadresse verfgbar: https://www.amazon. de/amazon-private-brand-EU-konformitaet Entsorgung Die Richtlinie ber Elektro- und Elektronik-

Altgerte zielt darauf ab, die Auswirkungen von elektrischen und elektronischen Waren auf die Umwelt zuminimieren, durch Steigerung der Wiederverwendung und des Recyclings sowie durch Reduktion der Anzahl an Elektro- und Elektronik-Altgerten, die auf Mlldeponien landen. Das Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass das Produkt am Ende seiner Nutzungsdauer separat vom normalen Hausmll entsorgt werden muss. Beachten Sie, dass es in Ihrer Verantwortung liegt, elektronische Gerte in Recycling-Zentren zu entsorgen, um die natrlichen Ressourcen zu erhalten. Jedes Land sollte Sammelzentren fr das Recycling elektrischer und elektronischer Gerte haben. Fr Informationen zu Ihren Recycling-Abgabestellen kontaktieren Sie bitte Ihre Abfallwirtschaftsbehrde fr Elektro- und Elektronikgerte, Ihre rtlichen Behrden oder Ihr Abfallentsorgungsunternehmen. 53 Entsorgung des Akkus Entsorgen Sie verwendete Akkus niemals in Ihrem Hausmll. Bringen Sie sie zu einer entsprechenden Entsorgungs-/Sammelstelle. Handelsmarken Die Wortmarke und Logos von Bluetooth sind eingetragene Warenzeichen der Bluetooth SIG, Inc. und jegliche Verwendung dieser Marken durch Amazon.com, Inc. oder verbundene Unternehmen erfolgt unter Lizenz. 54 Technische Daten Leistungsaufnahme:

5W Eingang:

Akkutyp:

Ladezeit:

5V

, 1A 3,7V Lithium-Akku, 1000mAh 3Stunden Betriebsfrequenz:

2402MHz ~ 2480MHz RF-Leistung:

4dBm Frequenzgang:

70Hz bis 20kHz Empfindlichkeit:

-6dB Impedanz:

Bluetooth-Version:

4 4.2 Betriebsbereich:

32, 8' (10m) 55 IP-Schutzart:

IPX4 Nettogewicht:

ca. 5,5oz. (157g) Abmessungen

(L x B x H):

ca. 4 x 3,5 x 1,6

(102 x 90 x 41mm) Gewhrleistung Eine Kopie der Gewhrleistung fr dieses Produkt erhalten Sie unter:

amazon.de/basics-garantie DE: +49 (0) 800-363-8469 AT: +43 0800-8866-3238 56 Feedback und Hilfe Gefllt es Ihnen? Gefllt es Ihnen nicht? Dann bewerten Sie das Produkt auf unserer Webseite!

AmazonBasics setzt sich fr die Bereitstellung kundenorientierter Produkte ein, um Ihre hohen Qualittsstandards zu erfllen. Bitte schreiben Sie eine Rezension, in der Sie Ihre Erfahrungen mit dem Produkt teilen. amazon.de/review/review-your-

purchases#

amazon.de/gp/help/customer/

contact-us 57 Guida di Benvenuto Italiano Contenuto: Prima di iniziare, assicurarsi che la confezione contenga i seguenti componenti:

B C G H D A F I E 58 J K A Interruttore ON/OFF B Indicatore Bluetooth C Indicatore della batteria D Aumenta volume E Interruttore riproduci/

pausa F Diminuisci volume G Presa AUX IN H Porta USB micro B I Microfono J Moschettone K Cavo USB L Ventosa L 59 AVVISI DI SICUREZZA IMPORTANTI Leggere attentamente le istruzioni e conservarle per utilizzo futuro. In caso di cessione del prodotto a terzi, accludere parimenti questo manuale utente. Quando si utilizzano apparecchi elettrici, necessario seguire sempre le precauzioni di sicurezza di base per ridurre il rischio di incendi, scosse elettriche e / o lesioni a persone tra cui:

Leggere le presenti istruzioni. Conservare queste istruzioni. Rispettare tutte le istruzioni. Per evitare cadute accidentali in piscine, vasche da bagno o altri contenitori d'acqua, non collocarlo sul bordo. 60 Non installare vicino a fonti di calore, quali termosifoni, camini, stufe o altri prodotti che producono calore (inclusi gli amplificatori). Per tutti gli interventi di assistenza, rivolgersi a personale qualificato. Sul prodotto non devono essere collocate sorgenti di fiamme libere, come candele accese. Per prevenire possibili danni all'apparato uditivo, evitare ascolti prolungati ad alto volume. Avvertenze sulla batteria AVVERTENZA Le batterie non devono essere esposte a calore eccessivo come luce solare, fuoco o simili. La batteria contenuta in questo prodotto non sostituibile. Non gettare il prodotto nel fuoco. Prima dello smaltimento, la batteria deve essere rimossa dal prodotto. Contattare un professionista qualificato. 61 Non caricare la batteria per un periodo di tempo prolungato quando il prodotto inutilizzato. Non caricare durante la notte. Se il prodotto sembra pieno o presenta altri fenomeni indesiderati (ad es. rumore eccessivo), interromperne immediatamente l'uso e contattare il servizio clienti. Non coprire durante la carica. Caricare il prodotto una volta ogni 3mesi per evitare di ridurre la durata della batteria. Le batterie producono calore durante la carica e la scarica. Se il prodotto troppo caldo al tocco, spegnere e scollegare immediatamente. Caricare il prodotto solo con una fonte di alimentazione compatibile di produttori affidabili, ad esempio un alimentatore da 5V

, 1A. In caso di fuoriuscita di acido dalla batteria, evitare il contatto con cute e occhi. Risciacquare immediatamente le aree interessate con abbondante acqua pulita, quindi rivolgersi a un medico. 62 Spiegazione dei simboli Questo simbolo sta per

"Conformit Europenne", che significa "Conformit alle direttive UE". Con il marchio CE il produttore conferma che questo prodotto conforme alle direttive e ai regolamenti europei applicabili. Corrente continua (DC). IPX4 Protetto contro gli spruzzi d'acqua da qualsiasi direzione. Non immergere in acqua. 63 Uso previsto Questo prodotto destinato unicamente all'uso domestico. Non destinato alluso commerciale. Questo prodotto protetto contro gli spruzzi d'acqua da qualsiasi direzione. Non immergere in acqua. La Societ non si assume alcuna responsabilit per danni causati da un uso improprio del prodotto o dal mancato rispetto delle presenti istruzioni. Prima del primo utilizzo Verificare che non vi siano danni causati dal trasporto. PERICOLO Rischio di soffocamento!

Tenere qualsiasi materiale dimballaggio lontano dai bambini: questi materiali sono una potenziale sorgente di pericolo, come il soffocamento. 64 Funzionamento AVVISO Il prodotto pu essere fissato alle piastrelle del bagno con la ventosa (L). AVVISO Il prodotto pu essere agganciato ad uno spallaccio/occhiello dello zaino con il moschettone (J). Ricarica della batteria incorporata Collegare il cavo USB (K) alla porta USB Micro B (H). Collegare l'altra estremit del cavo USB (K) a una porta USB-A di un computer o a un adattatore di alimentazione adatto 5V 1A. Durante la carica, l'indicatore della batteria (C) si accende in rosso. Quando l'indicatore di stato (C) si spegne, il prodotto completamente carico. 65 Accensione/Spegnimento

: Tenere premuto per accendere / spegnere. AVVISO Il prodotto si spegne automaticamente dopo circa 15minuti d'inattivit. Modalit di associazione Dopo l'accensione, il prodotto entra automaticamente in modalit di associazione. L'indicatore Bluetooth

(B) lampeggia in blu. Attivare il Bluetooth sul dispositivo che si desidera associare e cercare un nuovo dispositivo. Selezionare AmazonBasics WP912 dall'elenco sul dispositivo. Una volta associati i dispositivi, l'indicatore Bluetooth (B) si accende in blu. 66 Scollegamento del Bluetooth Tenere premuto collegato. L'indicatore Bluetooth (B) lampeggia in blu. per scollegare il dispositivo AVVISO Il prodotto tenta continuamente di ricollegare una connessione Bluetooth persa. Se non si riesce, ricollegarsi manualmente tramite il menu Bluetooth del dispositivo. Modalit ingresso ausiliario Collegare un cavo audio da 3,5mm (non incluso) alla presa AUX IN (G) e al dispositivo di riproduzione desiderato, ad es. lettore MP3. Riproduzione musicale

: Premere per avviare/mette in pausa la riproduzione.

: Tenere premuto per saltare al brano successivo.

: Tenere premuto per tornare al brano precedente. 67 Chiamata

: Premere per accettare/terminare una chiamata.

: Tenere premuto per rifiutare una chiamata. Controllo del volume AVVISO Dopo ogni avvio, il volume della riproduzione si resetta a quello medio.

: Premere per aumentare il volume.

: Premere per diminuire il volume. 68 Pulizia e manutenzione AVVISO Spegnere il prodotto prima di pulirlo. AVVISO Non immergere le parti elettriche del prodotto in acqua o in altri liquidi durante la pulizia. Non tenere mai il prodotto sotto l'acqua corrente. Per la pulizia passare un panno morbido leggermente inumidito. Non usare mai detergenti corrosivi, spazzole metalliche, spugne abrasive o utensili metallici o affilati per pulire il prodotto. Dichiarazione di Conformit UE Semplificata Il fabbricante, Amazon EU Sarl, dichiara che il tipo di apparecchiatura radio B07RS44KQN, B07RT6B1GN, B07RWDGGSH, B07RS44LV9, B07RT6BDV2 conforme alla direttiva 2014/53/UE. 69 Il testo completo della dichiarazione di conformit UE disponibile al seguente indirizzo Internet:

https://www.amazon.it/marchio_privato_di_ Amazon_conformita_EU Smaltimento La Direttiva sui rifiuti di apparecchiature elettriche ed elettroniche (RAEE) mira a minimizzare limpatto di suddette apparecchiature sullambiente, aumentando le pratiche di riutilizzo e riciclo e riducendo la quantit di rifiuti RAEE inviati in discarica. Il simbolo su questo prodotto o sullimballaggio indica che il prodotto dovr essere smaltito separatamente dai rifiuti domestici al termine del suo ciclo di vita. Si noti che lutente responsabile dello smaltimento delle apparecchiature elettroniche presso i centri di riciclo al fine di contribuire a preservare le risorse naturali. Ogni Paese deve disporre dei propri centri di raccolta per il riciclo di apparecchiature elettriche ed elettroniche. Per informazioni sui luoghi in cui avviene la raccolta per il riciclo, contattare le autorit competenti per la gestione dei rifiuti di apparecchiature elettriche ed elettroniche, lufficio municipale locale o il servizio di smaltimento dei rifiuti domestici. 70 Smaltimento Della Batteria Non smaltire le batterie usate insieme ai normali rifiuti domestici. Portarle in un luogo di smaltimento/raccolta appropriato. Marchi commerciali Il marchio denominativo e i loghi Bluetooth sono marchi registrati di propriet di Bluetooth SIG, Inc. e qualsiasi uso di tali marchi da parte di Amazon. com, Inc. o delle sue affiliate concesso in licenza. 71 Specifiche Consumo di corrente:

5W Ingresso:

5V

, 1A Tipo batteria:

Batteria al litio 3,7V, 1000mAh Tempo di carica:

3ore Frequenza di funzionamento:

2402MHz ~ 2480MHz Potenza RF:

4dBm Risposta in frequenza:

Da 70Hz a 20kHz Sensibilit:

Impedenza:

Versione Bluetooth:

-6dB 4 4,2 Campo di funzionamento: 32, 8' (10m) 72 Valutazione IP:

IPX4 Peso netto:

Dimensioni

(L x P x H):

circa 5,5oz (157g) circa 4 x 3,5 x 1,6'

(102 x 90 x 41mm) Informazioni di Garanzia Per ottenere una copia della garanzia del prodotto:

amazon.it/basics-garanzia

+39 (0) 800-628-805 73 Feedback e Aiuto Ti piace? Oppure no? Faccelo sapere scrivendo la tua recensione. AmazonBasics si impegna a distribuire prodotti orientati al cliente che siano allaltezza degli standard pi elevati. Pertanto, invitiamo i clienti a scrivere una recensione per condividere le proprie esperienze con il prodotto. amazon.it/review/review-your-

purchases#

amazon.it/gp/help/customer/

contact-us 74 Gua de Bienvenida Espaol Contenido: Antes de comenzar, compruebe que el embalaje incluye los siguientes componentes:

B C A F I E G H D 75 A Interruptor de encendido/

apagado B Indicador Bluetooth J C Indicador de la batera D Subir volumen E Botn para reproducir/pausar F Bajar volumen G Toma AUX IN H Puerto USB Micro B I Micrfono J Mosquetn K Cable USB L Ventosa 76 K L CONSEJOS DE SEGURIDAD IMPORTANTES Lea estas instrucciones atentamente y gurdelas para futuras consultas. Si transfiere el producto a una tercera persona, debe incluir tambin este manual de instrucciones. Al usar aparatos elctricos, siempre deben tomarse unas precauciones de seguridad bsicas para reducir el riesgo de incendio, de descarga elctrica y/o de daos personales incluyendo las siguientes:

Lea estas instrucciones. Guarde estas instrucciones. Siga todas las instrucciones. Para evitar cadas accidentales en piscinas, baeras u otros contenedores de agua, no lo coloque en el borde. 77 No lo instale cerca de fuentes de calor tales como radiadores, registros trmicos, estufas u otros aparatos (incluidos amplificadores) que produzcan calor. Todas la tareas de reparacin deben ser realizadas solo por profesionales. Las fuentes de llama desnuda como, por ejemplo, las velas encendidas, no deben colocarse encima del producto. Para evitar posibles daos auditivos, no escuche a un volumen demasiado alto durante mucho tiempo. Advertencias de la batera ADVERTENCIA Las bateras no debe exponerse a un calor excesivo, es decir, a la luz directa del sol, llamas o similares. La batera de este producto no es sustituible. No arroje el producto al fuego. Antes de la desechar la batera, primero debe retirarla del producto. Contacte con un profesional cualificado. 78 La batera no debe cargarse durante un periodo prolongado de tiempo si el producto no est enuso. No lo cargue durante toda la noche. Si el producto parece estar abultado o muestra otros fenmenos no deseados (por ejemplo, exceso de ruido), deje de usarlo inmediatamente y pngase en contacto con el servicio de atencin al cliente. No lo tape durante la carga. Cargue este producto como mnimo cada 3meses para evitar reducir la vida til de la batera. Las bateras producen calor durante la carga y la descarga. Si el producto se calienta demasiado al tacto, apguelo y desenchfelo inmediatamente. Cargue este producto solo con una fuente de alimentacin compatible de fabricantes reconocidos como, por ejemplo, un adaptador de corriente de 5V, 1A

. Si existen fugas en la batera, evite el contacto con la piel y los ojos. Enjuague las zonas afectadas inmediatamente con abundante agua limpia y, a continuacin, consulte con un mdico. 79 Explicacin de los smbolos Este smbolo corresponde a

"Conformidad Europea", que significa "Conformidad con las directivas europeas". Con el marcaje CE, el fabricante confirma que este producto cumple con las normas y directivas europeas aplicables. Corriente continua (CC). IPX4 Proteccin contra salpicaduras de agua desde cualquier direccin. No lo sumerja en agua. 80 Uso Previsto Este producto solo se ha diseado para uso domstico. No es apto para uso comercial. Este producto est protegido contra salpicaduras de agua desde cualquier direccin. No lo sumerja en agua. No se aceptar ninguna responsabilidad por los daos provocados por el uso inadecuado o por el incumplimiento de estas instrucciones. Antes del Primer Uso Compruebe si se han producido daos durante el transporte. PELIGRO Riesgo de asfixia! Mantenga los materiales de embalaje alejados de los nios;

estos materiales son peligro potencial (p. ej. asfixia). 81 Funcionamiento NOTA Gracias a la ventosa (L), el producto se puede colocar en los azulejos del bao. NOTA Gracias al mosquetn (J), el producto se puede enganchar en la correa/

argolla de una mochila. Carga de la batera integrada Conecte el cable USB (K) al puerto USB Micro B (H). Conecte el otro extremo del cable USB (K) a un puerto USB-A de un ordenador o un adaptador de alimentacin de 5V El indicador de la batera (C) se enciende en rojo durante la carga. 1A adecuado. El producto est totalmente cargado cuando el indicador de estado (C) se apaga. 82 Encendido y apagado

: Mantenga pulsado para encender/apagar. NOTA El producto se apaga automticamente al cabo de unos 15minutos de inactividad. Modo de emparejamiento A continuacin, el producto entra en modo de emparejamiento automticamente. El indicador Bluetooth

(B) parpadea en azul. Active el Bluetooth del dispositivo que desea emparejar y bsquelo. Seleccione "AmazonBasics WP912" de la lista de su dispositivo. Una vez emparejados los dispositivos, el indicador Bluetooth (B) se enciende en azul. 83 Desconexin de Bluetooth Mantenga presionado dispositivo conectado. El indicador Bluetooth (B) parpadea en azul. para desconectar el NOTA El producto intenta continuamente reconectarse a una conexin Bluetooth perdida. Si no puede, reconctelo manualmente mediante el men Bluetooth del dispositivo. Modo de entrada auxiliar Conecte un cable de audio 3,5mm (no incluido) a la toma AUX IN (G) y al dispositivo de reproduccin deseado, p. ej. reproductor de MP3. Reproduccin de msica

: Presione para reproducir/pausar la reproduccin.

: Mantenga presionado para saltar a la pista

: Mantenga presionado para volver a la pista siguiente. anterior. 84 Llamadas

: Presione para aceptar/terminar una llamada.

: Mantenga pulsado para rechazar llamadas. Control del volumen NOTA El volumen de la reproduccin se ajusta al volumen medio cada vez que se inicia.

: Presione para subir el volumen.

: Presione para bajar el volumen. 85 Limpieza y Mantenimiento Apague el producto antes de limpiarlo. NOTA NOTA Durante la limpieza, no sumerja las piezas elctricas del producto en agua u otros lquidos. Nunca sujete el producto bajo el agua. Para limpiar, pase un pao suave y ligeramente hmedo. Nunca utilice agentes corrosivos, cepillos de alambre, decapantes, utensilios metlicos o puntiagudos para limpiar el producto. Declaracin UE de Conformidad Simplificada Por la presente, Amazon EU Sarl declara que el tipo de equipo radioelctrico B07RS44KQN, B07RT6B1GN, B07RWDGGSH, B07RS44LV9, B07RT6BDV2 es conforme con la Directiva 2014/53/UE. 86 El texto completo de la declaracin UE de conformidad est disponible en la direccin Internet siguiente: https://www.amazon.es/

marca_privada_de_amazon_EU_cumpimiento Eliminacin El objetivo de la Directiva sobre residuos de aparatos elctricos y electrnicos

(RAEE) es minimizar el impacto de los bienes elctricos y electrnicos en el medio ambiente, aumentando la reutilizacin y el reciclaje y reduciendo la cantidad de RAEE que van a los vertederos. El smbolo en este producto o en su embalaje indica que debe eliminarse separado de los residuos domsticos al final de su vida til. Tenga en cuenta que es su responsabilidad desechar el equipamiento electrnico en los puntos de reciclaje adecuados para conservar los recursos naturales. Cada pas tiene sus puntos de recogida para el reciclaje del equipamiento elctrico y electrnico. Para informacin acerca de su zona de recogida de residuos, contacte con su autoridad de gestin de residuos de aparatos elctricos y electrnicos, con su oficina local o con su servicio de eliminacin de residuos domsticos. 87 Eliminacin de la Batera Nunca deseche las bateras usadas en los residuos domsticos. Llvelas a un lugar de recogida/eliminacin adecuado. Marcas comerciales Los logotipos y marca denominativa Bluetooth son marcas comerciales registradas propiedad Bluetooth SIG, Inc. y cualquier uso de estas marcas por parte de Amazon.com, Inc. o sus afiliadas es bajo licencia. 88 Especificaciones Consumo elctrico:

5W Entrada:

5V

, 1A Tipo de batera:

Batera de litio 3,7V, 1000mAh Tiempo de carga:

3horas Frecuencia de funcionamiento:

2402MHz ~ 2480MHz Potencia RF:

4dBm Respuesta en frecuencia: De 70Hz a 20kHz Sensibilidad:

Impedancia:

-6dB 4 Versin de Bluetooth:

4,2 Rango de funcionamiento: 32. 8' (10m) 89 Clasificacin IP:

IPX4 Peso neto:

aprox. 5,5oz (157g) Dimensiones

(An. x Pr. x Al.):

aprox. 4 x 3,5 x 1,6'

(102 x 90 x 41mm) Informacin Sobre la Garanta Para obtener una copia de la garanta de este producto:

ES: amazon.es/basics-garantia MX: amazon.com/AmazonBasics/

Warranty ES: +34 (0) 900-803-711 MX: +52 (0) 442-348-9587 90 Comentarios y Ayuda Le encanta? No le gusta nada? Escriba una opinin como cliente. En AmazonBasics nos comprometemos a proveer productos pensados para satisfacer a nuestros clientes y que estn a la altura de sus elevados estndares de calidad. Le animamos a que escriba una opinin sobre su experiencia con el producto. ES: amazon.es/review/review-your-

purchases#

MX: amazon.com.mx/review/review-

your-purchases#

ES: amazon.es/gp/help/customer/

contact-us MX: amazon.com.mx/gp/help/

customer/contact-us 91 Welkomstgids Nederlands Inhoud: Controleer, voordat u aan de slag gaat, of het pakket de volgende zaken bevat:

B C G H D A F I E 92 A Aan-uitschakelaar B Bluetooth-controlelampje J C Batterijcontrolelampje D Volume verhogen E F Afspelen/pauze-

schakelaar Volume verlagen G AUX IN-aansluiting H USB Micro B-poort I Microfoon J Karabijnhaak K USB-kabel L Zuignap K L 93 BELANGRIJKE VOORZORGSMAATREGELEN Lees deze gebruiksaanwijzing aandachtig door en bewaar ze voor later gebruik. Doe bij overdracht van dit product aan derden deze gebruiksaanwijzing erbij. Volg altijd de basisvoorschriften inzake veiligheid op wanneer u elektrische apparaten gebruikt om het risico op brand, elektrische schokken en persoonlijk letsel te beperken, zoals:

Lees deze gebruiksaanwijzing. Bewaar deze gebruiksaanwijzing. Leef alle instructies na. Om te vermijden dat het product in een zwembad, badkuip of andere houder met water valt, plaats het niet dicht tegen de rand. 94 Installeer het toestel niet in de buurt van warmtebronnen zoals kachels, of andere warmteproducerende apparaten (waaronder versterkers). Laat alle reparaties door een vakbekwame reparateur uitvoeren. Plaats geen bronnen met open vlam, zoals aangestoken kaarsen, op het product. Luister niet gedurende een lange periode naar harde geluiden om mogelijke gehoorbeschadiging te voorkomen. Batterijwaarschuwingen WAARSCHUWING Stel de batterijen nietbloot aan overmatige hitte, zoals van de zon, vuur, etc. De batterij in dit product is niet vervangbaar. Gooi de batterij niet in vuur. Haal de batterij uit het product voordat u het afdankt. Neem contact op met een vakman. 95 Laad de batterij niet gedurende een lange tijd op wanneer het product niet wordt gebruikt. Laad het product niet gedurende de nacht op. Als het apparaat lijkt op te zwellen of een ander ongewenst fenomeen (bijv. overmatig veel lawaai) treedt op, gebruik het niet langer en neem contact op met de klantenservice. Dek het product niet af wanneer het wordt opgeladen. Laad dit product minstens elke 3maanden op om een kortere levensduur te vermijden. Batterijen produceren warmte tijdens het op- en ontladen. Als het product te heet wordt om aan te raken, schakel het uit en ontkoppel het onmiddellijk. Laad dit product alleen op met een compatibele voedingsbron van een betrouwbare fabrikant, bijv. een 5V

, 1A netadapter. Als de batterij lekt, vermijd contact met huid en ogen. Spoel de getroffen lichaamsdelen onmiddellijk af met veel schoon water en raadpleeg een arts. 96 Uitleg van de symbolen Dit symbool is de afkorting van Conformit Europenne wat Conformiteit met de EU-richtlijnen betekent. Met de CE-markering bevestigt de fabrikant dat dit product in overeenstemming is met de geldende Europese richtlijnen en voorschriften. Gelijkstroom (DC). IPX4 Bescherming tegen gespat uit alle richtingen Niet in water onderdompelen. 97 Beoogd gebruik Dit product is alleen bestemd voor huishoudelijk gebruik. Het is niet bestemd voor commercieel gebruik. Dit product is beschermd tegen gespat uit alle richtingen. Niet in water onderdompelen. Wij aanvaarden geen enkele aansprakelijkheid voor schade die als gevolg van verkeerd gebruik of het negeren van deze instructies is ontstaan. Vr het eerste gebruik Controleer op transportschade. GEVAAR Verstikkingsgevaar! Houd alle verpakkingsmateriaal uit de buurt van kinderen. Dit materiaal kan gevaar, zoals verstikking, opleveren. 98 Gebruik OPMERKING Het product kan met behulp van de zuignap (L) op badkamertegels worden vastgemaakt. OPMERKING Het product kan met behulp van de karabijnhaak (J) aan de riem/ring van een rugzak worden vastgemaakt. De gentegreerde batterij opladen Verbind de USB-kabel (K) met een USB Micro-B poort (H). Sluit het ander uiteinde van de USB-kabel (K) aan op een USB-A poort van een computer of een gepaste netadapter 5V 1A. Het statuscontrolelampje (C) knippert rood tijdens het opladen. Het product is volledig opgeladen wanneer het statuscontrolelampje (C) dooft. 99 In-/uitschakelen

: Druk en houd ingedrukt om in/uit te schakelen. OPMERKING Het product wordt na een inactiviteit van ongeveer 15minuten automatisch uitgeschakeld. Koppelingsmodus Het product opent na inschakeling automatisch de koppelingsmodus. Het Bluetooth-

controlelampje (B) knippert blauw. Activeer Bluetooth op het apparaat dat u wilt koppelen en zoek naar een nieuw apparaat. Selecteer AmazonBasics WP912 uit de lijst dat op uw apparaat is weergegeven. Wanneer de apparaten zijn gekoppeld, brandt het Bluetooth-controlelampje (B) blauw. 100 Bluetooth ontkoppelen ingedrukt om het verbonden Druk en houd apparaat te ontkoppelen. Het Bluetooth-

controlelampje (B) knippert blauw. OPMERKING Het product probeert continu om een nieuwe verbinding met een verloren Bluetooth-verbinding te maken. Als dit niet lukt, maak een handmatige verbinding via het Bluetooth-menu van het apparaat. AUX-ingangsmodus Sluit een 3,5mm audiokabel (niet inbegrepen) aan op de AUX IN-aansluiting (G) en op het gewenste afspeelapparaat, bijv. MP3-speler. Muziek afspelen

: Druk om muziek af te spelen/ te onderbreken.

: Druk en houd ingedrukt om naar de volgende track te gaan.

: Druk en houd ingedrukt om naar de vorige track te gaan. 101 Bellen beindigen. wijzen.

: Druk om een oproep aan te nemen/te

: Druk en houd ingedrukt om een oproep af te Geluidssterkteregelaar OPMERKING Het afspeelvolume wordt na elke inschakeling naar het medium volume teruggezet.

: Druk om het volume te verhogen.

: Druk om het volume te verlagen. 102 Reiniging en onderhoud OPMERKING Schakel het product uit voordat u het schoonmaakt. OPMERKING Dompel de elektrische onderdelen van het product tijdens het reinigen niet in water of een andere vloeistof. Houd het product nooit onder stromend water. Maak het product schoon met een zachte en licht bevochtigde doek. Maak het product nooit schoon met een bijtend schoonmaakmiddel, staalborstel, schuursponsje, metalen of scherp gereedschap. Vereenvoudigde EU conformiteitsverklaring Amazon EU Sarl verklaart hierbij dat de radioapparatuur van het type B07RS44KQN, B07RT6B1GN, B07RWDGGSH, B07RS44LV9, B07RT6BDV2 in overeenstemming is met Richtlijn 2014/53/EU. 103 De volledige tekst van de EU-

conformiteitsverklaring is online beschikbaar via: https://www.amazon.co.uk/amazon_ private_brand_EU_compliance. Afdanking De Richtlijn inzake Afgedankte Elektrische en Elektronische Apparatuur

(AEEA) heeft als doel de impact van elektrische en elektrische goederen tot een minimum te beperken door hergebruik en recycling te stimuleren en de hoeveelheid AEEA die op de stortplaats terechtkomt te beperken. Het symbool op dit product of de verpakking geeft aan dat dit product aan het einde van zijn levensduur niet samen met het huisvuil mag worden weggegooid. Het is uw verantwoordelijkheid om het elektronisch apparaat in te leveren bij een milieustation om bij te dragen tot het behoud van onze natuurlijke rijkdommen. Elk land dient zijn inzamelpunten te hebben voor het recyclen van elektrische en elektronische apparatuur. Voor meer informatie over de milieustations, neem contact op met de juiste instantie in uw gemeente. 104 Verwijdering Van de Accu Gooi gebruikte batterijen nooit weg met uw huisvuil. Lever deze in bij een geschikt inzamelpunt. Handelsmerken Het Bluetooth woordmerk en logos zijn geregistreerde handelsmerken die eigendom zijn van Bluetooth SIG, Inc. en elk gebruik van deze merken door Amazon.com, Inc. of haar dochterondernemingen is onder licentie. 105 Specificaties Vermogensverbruik:

5W Invoer:

5V

, 1A Type batterij:

3,7V Lithium batterij, 1000mAh Oplaadtijd:

3uur Werkingsfrequentie:

2402MHz ~ 2480MHz RF-vermogen:

4dBm Frequentierespons:

70Hz tot 20kHz Gevoeligheid:

-6dB Impedantie:

Bluetooth-versie:

4 4,2 Werkingsbereik:

32, 8' (10m) 106 IP-waarde:

IPX4 Nettogewicht:

ca. 5,5oz (157g) Afmetingen

(L x B x H):

ca. 4 x 3,5 x 1,6'

(102 x 90 x 41mm) Garantie Informatie Om een kopie van de garantie voor dit product te krijgen:

amazon.nl/basics-garantie

+31 8000227380 107 Feedback en Hulp Vind je het leuk? Vind je het niet leuk? Beoordeel het product dan op onze website!

AmazonBasics is toegewijd aan het leveren van klantgerichte producten die voldoen aan uw hoge standaarden. Wij moedigen u aan om een review te schrijven waarin u uw ervaringen met het product deelt. amazon.nl/review/review-your-

purchases#

amazon.nl/gp/help/customer/

contact-us 108 B C G H D A F I E 109 A /

B Bluetooth C D E /

F G AUX IN H USB B I J K USB L 110 J K L 3 111 112 3 1 5 V

, 1 A 113 Conformit EuropenneEU CE

(DC) IPX4 114

115

(L)

(J)

USB (K) USB B (H) USB (K) USB-A 5 V 1 A

(C)

(C) 116

15 Bluetooth

(B) Bluetooth Amazon WP912 Bluetooth (B) 117 Bluetooth Bluetooth (B) Bluetooth Bluetooth Auxiliary 3.5 mm AUX IN (G) MP3

118

119 120 Bluetooth Bluetooth SIG, Inc. Amazon com. Inc. 121 5 W 5 V 1 A 3.7 V 1000 mAh 3 2402 MHz ~ 2480 MHz 4 dBm 70 Hz 20 kHz

-6 dB 4 Bluetooth 4.2 32.8 (10 m) 122 JP IPX4 5.5 (157 g) 4 x 3.5 x 1.6 x x

(102 x 90 x 41 mm) amazon.jp/AmazonBasics/Warranty

+81 (0) 120-899-276 123 Amazon amazon.jp/review/review-your-

purchases#

amazon.jp/gp/help/customer/

contact-us 124 amazon.com/AmazonBasics V4-07/19

WP912 (Black) Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Black Enceinte de Douche Sans Fil avec Haut-Parleur de 5W, Ventouse, Micro Intgr - Noir Altavoz Inalmbrico para Ducha con Controlador de 5W, Ventosa, Micrfono Integrado - Negro MODEL\MODLE\MODELO : WP912 BLACK ASIN : B07RWDGGSH Amazon EU S. r.l., 38 avenue John F. Kennedy, L-1855 Luxembourg CAN ICES-3 (B)/NMB-3(B) FCC ID:HBOWP912 Made in China Fabriqu en Chine Hecho en China HVIN: WP912 IC : 10550A-WP912 Input\Entre\Entrada: 5V 1A Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Black Enceinte de Douche Sans Fil avec Haut-Parleur de 5W, Ventouse, Micro Intgr - Noir Altavoz Inalmbrico para Ducha con Controlador de 5W, Ventosa, Micrfono Integrado - Negro MODEL\MODLE\MODELO : WP912 BLACK ASIN : B07RWDGGSH Amazon EU S. r.l., 38 avenue John F. Kennedy, L-1855 Luxembourg CAN ICES-3 (B)/NMB-3(B) FCC ID:HBOWP912 Made in China Fabriqu en Chine Hecho en China HVIN: WP912 IC : 10550A-WP912 Input\Entre\Entrada: 5V 1A Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Black Enceinte de Douche Sans Fil avec Haut-Parleur de 5W, Ventouse, Micro Intgr - Noir Altavoz Inalmbrico para Ducha con Controlador de 5W, Ventosa, Micrfono Integrado - Negro MODEL\MODLE\MODELO : WP912 BLACK ASIN : B07RWDGGSH Amazon EU S. r.l., 38 avenue John F. Kennedy, L-1855 Luxembourg CAN ICES-3 (B)/NMB-3(B) FCC ID:HBOWP912 Made in China Fabriqu en Chine Hecho en China Input\Entre\Entrada: 5V IC : 10550A-WP912 1A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 39x20mm PVC 4. Helvetica Neue LT Std - 65 Medium 2019-05-23 WP912Black GM19413 WP912 17.7.031.0603

Authority to Act as Agent Date: _2019-06-21 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern:

I appoint TUV Rheinland (Shenzhen) Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with ___ (SHENZHEN FENDA TECHNOLOGY CO., LTD. and Fenda Hi-Tech Park, Zhoushi Road, Shiyan Town, Baoan District, Shenzhen, Guangdong,China) __. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 12 months By: | We Chen. Mr frank Chenzhonghua

(Signature) (Print name) Title: engineer Telephone __0755-27486668 On behalf of: SHENZHEN FENDA TECHNOLOGY CO., LTD.

(Company Name) QF094234 Page 1 of 1 Revision 0

Confidentiality Letter Date: 23 July 2019 Subject: Confidentiality Request for FCC ID: HBOWP912 and IC ID: 10550A-WP912 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit

(] Short Term XX] Permanent Block Diagrams

&X] Short Term External Photos XX] Short Term [_] Permanent Internal Photos

(_] Short Term >] Permanent Operation Description/Theory of Operation

[_] Short Term XX] Permanent Part List/Tune-Up Procedure

[_] Short Term XX] Permanent Schematics XX] Short Term Test Setup Photos X] Short Term [_] Permanent Users Manual SHENZHEN FENDA TECHNOLOGY CO., LTD. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to

"competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-

1705. Sincerely, By: | rtd Chan. Mr frank Chenzhonghua / engineer

(Signature) (Print name/Title)

FCC ID: HBOWP912 Radio Frequency Exposure Compliance RESULT:

Test Specification Test standard Measurement Record:

: FCC KDB Publication 447498 v06 Pass The measured maximum conducted output power of the EUT is 3.57dBm 2.28 mW, which is far below the SAR exclusion threshold level 10mW (SAR Test Exclusion Thresholds for 100 MHz 6 GHz and 50 mm), hence the EUT is excluded from SAR evaluation according to FCC KDB publication 447498 D01: Mobile and Portable RF Exposure. Guidance v06.

Access to the World FCC 47 CFR PART 15 SUBPART C CERTIFICATION TEST REPORT For AmazonBasics Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Green AmazonBasics Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic Blue AmazonBasics Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Black AmazonBasics Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Gray AmazonBasics Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Lime Green Model No.: WP912GREEN, WP912BLUE, WP912BLACK, WP912GRAY, WP912LIME GREEN FCC ID: HBOWP912 Trade Mark:

Report No.: ES190605027W01 Issue Date: June 26, 2019 Prepared for SHENZHEN FENDA TECHNOLOGY CO.,LTD. Fenda Hi-Tech Park, Zhoushi Road, Shiyan Town, Baoan District, Shenzhen City, Guangdong, China Prepared by EMTEK (SHENZHEN) CO., LTD. Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TEL: 86-755-26954280 FAX: 86-755-26954282 TRF No.:FCC 15.247/A Page 1 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World Table of Contents 1 TEST RESULT CERTIFICATION.........................................................................................................................3 2 EUT TECHNICAL DESCRIPTION........................................................................................................................5 3 SUMMARY OF TEST RESULT............................................................................................................................ 6 4 TEST METHODOLOGY........................................................................................................................................ 7 4.1 GENERAL DESCRIPTION OF APPLIED STANDARDS............................................................................7 4.2 MEASUREMENT EQUIPMENT USED.........................................................................................................7 4.3 DESCRIPTION OF TEST MODES............................................................................................................... 8 5 FACILITIES AND ACCREDITATIONS.................................................................................................................9 5.1 FACILITIES......................................................................................................................................................9 5.2 LABORATORY ACCREDITATIONS AND LISTINGS................................................................................. 9 6 TEST SYSTEM UNCERTAINTY........................................................................................................................ 10 7 SETUP OF EQUIPMENT UNDER TEST...........................................................................................................11 7.1 RADIO FREQUENCY TEST SETUP 1.......................................................................................................11 7.2 RADIO FREQUENCY TEST SETUP 2.......................................................................................................11 7.3 CONDUCTED EMISSION TEST SETUP...................................................................................................13 7.4 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM.................................................................... 14 7.5 SUPPORT EQUIPMENT..............................................................................................................................14 8 FREQUENCY HOPPING SYSTEM REQUIREMENTS................................................................................... 15 8.1 STANDARD APPLICABLE.................................................................................................................................. 15 8.2 EUT PSEUDORANDOM FREQUENCY HOPPING SEQUENCE.............................................................................15 8.3 EQUAL HOPPING FREQUENCY USE.................................................................................................................16 8.4 FREQUENCY HOPPING SYSTEM...................................................................................................................... 16 9 TEST REQUIREMENTS..................................................................................................................................... 17 9.1 20DB BANDWIDTH...................................................................................................................................... 17 9.2 CARRIER FREQUENCY SEPARATION....................................................................................................23 9.3 NUMBER OF HOPPING FREQUENCIES................................................................................................. 29 9.4 AVERAGE TIME OF OCCUPANCY (DWELL TIME)................................................................................ 32 9.5 MAXIMUM PEAK CONDUCTED OUTPUT POWER................................................................................ 39 9.6 CONDUCTED SUPRIOUS EMISSION...................................................................................................... 45 9.7 RADIATED SPURIOUS EMISSION............................................................................................................64 9.8 CONDUCTED EMISSION TEST.................................................................................................................94 9.9 ANTENNA APPLICATION........................................................................................................................... 97 TRF No.:FCC 15.247/A Page 2 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World 1 TEST RESULT CERTIFICATION Applicant Address Manufacture Address EUT

: SHENZHEN FENDA TECHNOLOGY CO.,LTD.

: Fenda Hi-Tech Park, Zhoushi Road, Shiyan Town, Baoan District, Shenzhen City, Guangdong, China

: SHENZHEN FENDA TECHNOLOGY CO.,LTD.

: Fenda Hi-Tech Park, Zhoushi Road, Shiyan Town, Baoan District, Shenzhen City, Guangdong, China

: AmazonBasics Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Green AmazonBasics Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Blue AmazonBasics Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Black AmazonBasics Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Gray AmazonBasics Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Lime Green Model

: WP912GREEN, WP912BLUE, WP912BLACK, WP912GRAY, WP912LIME GREEN

(Note: The model of WP926 has three colors, all of which are the same expcept the color.) Trademark

:

Measurement Procedure Used:

APPLICABLE STANDARDS STANDARD FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C TEST RESULT PASS The above equipment was tested by EMTEK (SHENZHEN) CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10 (2013) and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 2 and Part 15.247 The test results of this report relate only to the tested sample identified in this report Date of Test :

Prepared by :

Reviewer :

Approve & Authorized Signer :

June 5, 2019 to June 25, 2019 Stephen liang/Editor Yaping Shen/Supervisor Lisa Wang/Manager TRF No.:FCC 15.247/A Page 3 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World Modified History Version V1.0 Report No. ES190605027W01 Revision Date June 26, 2019 Summary Original Report TRF No.:FCC 15.247/A Page 4 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World 2 EUT TECHNICAL DESCRIPTION Characteristics Description AmazonBasics Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Green AmazonBasics Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Blue AmazonBasics Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Black AmazonBasics Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Gray AmazonBasics Wireless Shower Speaker with 5W Driver, Suction Cup, Built-in Mic - Lime Green WP912GREEN, WP912BLUE, WP912BLACK, WP912GRAY, WP912LIME GREEN

(Note: The model of WP912 has three colors, all of which are the same expcept the color.) Product Model Number Device Type Bluetooth V4.2 Data Rate Modulation:

1Mbps for BT V4.2 GFSK modulation 2Mbps for BT V4.2 /4DQPSK modulation 3Mbps for BT V4.2 8DPSK modulation GFSK modulation for BT V4.2 (1Mbps)

/4DQPSK modulation for BT V4.2 (2Mbps) 8DPSK modulation for BT V4.2 (3Mbps) Operating Frequency Range(s):

2402-2480MHz Number of Channels:

79 channels Transmit Power Max:

3.57 dBm Antenna Type Antenna Gain Power supply Test Voltage Integral Antenna 0 dBi Battery 3.7V, 1000mAh DC 5V by USB Port AC 120V/60Hz Temperature Range:

0~+45 Note: for more details, please refer to the Users manual of the EUT. TRF No.:FCC 15.247/A Page 5 of 98 Report No.: ES190605027W01 Ver.1.0 3 SUMMARY OF TEST RESULT Test Parameter 20 dB Bandwidth Carrier Frequency Separation Number of Hopping Frequencies Average Time of Occupancy (Dwell Time) Maximum Peak Conducted Output Power Conducted Spurious Emissions FCC Part Clause 15.247(a)(1) 15.247(a)(1) 15.247(a)(1) 15.247(a)(1) 15.247(b)(1) 15.247(c) 15.247(d), 15.209 Radiated Spurious Emissions 15.207 15.203 NOTE1: N/A (Not Applicable) Conducted Emission Antenna Application Access to the World Remark Verdict PASS PASS PASS PASS PASS PASS PASS PASS PASS RELATED SUBMITTAL(S) / GRANT(S):

This submittal(s) (test report) is intended for FCC ID: HBOWP912 filing to comply with Section 15.247 of the FCC Part 15, Subpart C Rules. TRF No.:FCC 15.247/A Page 6 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World 4 TEST METHODOLOGY 4.1 GENERAL DESCRIPTION OF APPLIED STANDARDS According to its specifications, the EUT must comply with the requirements of the following standards:

FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C FCC KDB 558074 D01 15.247 Meas Guidance v05r02 4.2 MEASUREMENT EQUIPMENT USED 4.2.1 Conducted Emission Test Equipment EQUIPMENT TYPE Test Receiver L.I.S.N. MFR Rohde & Schwarz Schwarzbeck 50 Coaxial Switch Anritsu Pulse Limiter Voltage Probe I.S.N Rohde & Schwarz Rohde & Schwarz Rohde & Schwarz 4.2.2 Radiated Emission Test Equipment MODEL NUMBER ESCS30 NNLK8129 MP59B ESH3-Z2 TK9416 ENY22 LAST CAL. DUE CAL. SERIAL NUMBER 828985/018 8129203 M20531 100006 May 19, 2019 May 18, 2020 May 19, 2019 May 18, 2020 May 19, 2019 May 18, 2020 May 19, 2019 May 18, 2020 May 19, 2019 May 18, 2020 1109.9508.02 May 19, 2019 May 18, 2020 N/A EMI Test Receiver Rohde & Schwarz EQUIPMENT TYPE Pre-Amplifier Bilog Antenna Loop Antenna Horn Antenna Horn Antenna Cable Cable Cable Cable MFR HP ARA Schwarzbeck Schwarzbeck Schwarzbeck Schwarzbeck Rosenberger Schwarzbeck Schwarzbeck MODEL NUMBER ESU 8447D VULB9163 PLA-1030/B BBHA 9170 BBHA 9120 AK9513 N/A AK9513 AK9513 SERIAL NUMBER LAST CAL. DUE CAL. 142 1029 1302.6005.26 May 19, 2019 May 18, 2020 2944A07999 May 19, 2019 May 18, 2020 May 19, 2019 May 18, 2020 May 19, 2019 May 18, 2020 BBHA9170399 May 19, 2019 May 18, 2020 May 19, 2019 May 18, 2020 May 19, 2019 May 18, 2020 May 19, 2019 May 18, 2020 May 19, 2019 May 18, 2020 May 19, 2019 May 18, 2020 D143 ACRX1 FP2RX2 CRPX1 CRRX2 4.2.3 Radio Frequency Test Equipment EQUIPMENT TYPE MFR Spectrum Analyzer Signal Analyzer Power meter Power sensor Agilent Agilent Anritsu Anritsu MODEL NUMBER E4407B N9010A ML2495A MA2411B FSV40 DUE CAL. LAST CAL. SERIAL NUMBER 88156318 May 19, 2019 May 18, 2020 My53470879 May 19, 2019 May 18, 2020 May 19, 2019 May 18, 2020 May 19, 2019 May 18, 2020 May 19, 2019 May 18, 2020 0824006 0738172 100967 Spectrum Analyzer Remark: Each piece of equipment is scheduled for calibration once a year. Rohde & Schwarz TRF No.:FCC 15.247/A Page 7 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World 4.3 DESCRIPTION OF TEST MODES The EUT has been tested under its typical operating condition. The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner which intends to maximize its emission characteristics in a continuous normal application. The Transmitter was operated in the normal operating mode. The TX frequency was fixed which was for the purpose of the measurements. Test of channel included the lowest and middle and highest frequency to perform the test, then record on this report. Those data rates (1Mbps for GFSK modulation; 2Mbps for /4-DQPSK modulation; 3Mbps for 8DPSK modulation ) were used for all test. Pre-defined engineering program for regulatory testing used to control the EUT for staying in continuous transmitting and receiving mode is programmed. Frequency and Channel list:

Channel Frequency Channel 0 1 2 39 40 41 Note: fc=2402MHz+(k-1)1MHz k=1 to 79

(MHz) 2402 2403 2404 Frequency

(MHz) 2441 2442 2443 Channel 76 77 78 Frequency

(MHz) 2478 2479 2480 Test Frequency and channel:

Lowest Frequency Middle Frequency Highest Frequency Channel 0 Frequency

(MHz) 2402 Channel 39 Frequency

(MHz) 2441 Channel 78 Frequency

(MHz) 2480 TRF No.:FCC 15.247/A Page 8 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World 5 FACILITIES AND ACCREDITATIONS 5.1 FACILITIES All measurement facilities used to collect the measurement data are located at Bldg 69, Majialong Industry Zone District, Nanshan District, Shenzhen, China The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.10 and CISPR Publication 22. 5.2 LABORATORY ACCREDITATIONS AND LISTINGS Site Description EMC Lab.

: Accredited by CNAS, 2018.11.30 The certificate is valid until 2022.10.28 The Laboratory has been assessed and proved to be in compliance with CNAS-CL01:2006 (identical to ISO/IEC 17025:2017) The Certificate Registration Number is L2291 Accredited by TUV Rheinland Shenzhen 2018.3.30 The Laboratory has been assessed according to the requirements ISO/IEC 17025 Accredited by FCC, August 09, 2018 Designation Number: CN1204 Test Firm Registration Number: 882943 Accredited by A2LA, August 08, 2018 The Certificate Registration Number is 4321.01 Accredited by Industry Canada, November 09, 2018 The Certificate Registration Number is CN0008 Name of Firm

: EMTEK (SHENZHEN) CO., LTD. Site Location

: Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TRF No.:FCC 15.247/A Page 9 of 98 Report No.: ES190605027W01 Ver.1.0 6 TEST SYSTEM UNCERTAINTY The following measurement uncertainty levels have been estimated for tests performed on the apparatus:

Access to the World Parameter Radio Frequency Maximum Peak Output Power Test Conducted Emissions Test Radiated Emission Test Occupied Bandwidth Test Band Edge Test All emission, radiated Antenna Port Emission Temperature Humidity Uncertainty 1x10^-5 1.0dB 2.0dB 2.0dB 1.0dB 3dB 3dB 3dB 0.5 3%

Measurement Uncertainty for a level of Confidence of 95%

TRF No.:FCC 15.247/A Page 10 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World 7 SETUP OF EQUIPMENT UNDER TEST 7.1 RADIO FREQUENCY TEST SETUP 1 The components antenna ports(s) of the EUT are connected to the measurement instrument per an appropriate attenuator. The EUT is controlled by PC/software to emit the specified signals for the purpose of measurements. EUT Attenuator Measurement Instrument 7.2 RADIO FREQUENCY TEST SETUP 2 The test site semi-anechoic chamber has met the requirement of NSA tolerance 4 dB according to the standards: ANSI C63.10. The test distance is 3m.The setup is according to the requirements in Section 13.1.4.1 of ANSI C63.10-2013 and CAN/CSA-CEI/IEC CISPR 22. Below 30MHz The EUT is placed on a turntable 0.8meters above the ground in the chamber, 3 meter away from the antenna (loop antenna). The Antenna should be positioned with its plane vertical at the specified distance from the EUT and rotated about its vertical axis for maximum response at each azimuth about the EUT. The center of the loop shall be 1 m above the ground. For certain applications, the loop antenna plane may also need to be positioned horizontally at the specified distance from the EUT. Above 30MHz The EUT is placed on a turntable 0.8meters above the ground in the chamber, 3 meter away from the antenna. The maximal emission value is acquired by adjusting the antenna height, polarisation and turntable azimuth. Normally, the height range of antenna is 1 m to 4 m, the azimuth range of turntable is 0 to 360, and the receive antenna has two polarizations Vertical (V) and Horizontal (H). Above 1GHz:

(Note: the FCCs permission to use 1.5m as an alternative per TCBC Conf call of Dec. 2, 2014.) The EUT is placed on a turntable 1.5 meters above the ground in the chamber, 3 meter away from the antenna. The maximal emission value is acquired by adjusting the antenna height, polarisation and turntable azimuth. Normally, the height range of antenna is 1 m to 4 m, the azimuth range of turntable is 0 to 360, and the receive antenna has two polarizations Vertical (V) and Horizontal (H).

(a) Radiated Emission Test Set-Up, Frequency Below 30MHz Turntable EUT 3m 0.8 m Test Receiver Ground Plane Coaxial Cable TRF No.:FCC 15.247/A Page 11 of 98 Report No.: ES190605027W01 Ver.1.0

(b) Radiated Emission Test Set-Up, Frequency Below 1000MHz Access to the World 3m 0.8 EUT Turntabl e Test Receiver Ground Plane 1m to 4m Coaxial Cable

(c) Radiated Emission Test Set-Up, Frequency above 1000MHz Turntable EUT 3m 4m 1.5m 1m Test Amplifier Receiver TRF No.:FCC 15.247/A Page 12 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World 7.3 CONDUCTED EMISSION TEST SETUP The mains cable of the EUT (Perfect Share Mini) must be connected to LISN. The LISN shall be placed 0.8m from the boundary of EUT and bonded to a ground reference plane for LISN mounted on top of the ground reference plane. This distance is between the closest points of the LISN and the EUT. All other units of the EUT and associated equipment shall be at least 0.8m from the LISN. Ground connections, where required for safety purposes, shall be connected to the reference ground point of the LISN and, where not otherwise provided or specified by the manufacturer, shall be of same length as the mains cable and run parallel to the mains connection at a separation distance of not more than 0.8m. According to the requirements in Section 13.1.4.1 of ANSI C63.10-2013 Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30 MHz using CISPR Quasi-Peak and average detector mode. Reference Ground EMI Receiver EUT Auxiliary Equipment Reference Ground LISN 80cm 50 80cm LIS N TRF No.:FCC 15.247/A Page 13 of 98 Report No.: ES190605027W01 Ver.1.0 7.4 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM Access to the World AC adapter EUT EUT 7.5 SUPPORT EQUIPMENT EUT Cable List and Details Cable Description Length (m) USB cable 0.88 Auxiliary Cable List and Details Cable Description Length (m) Shielded

/Unshielded With / Without Ferrite Supplied by Certification Unshielded Without Ferrite Client

/

Shielded

/Unshielded With / Without Ferrite Supplied by Certification

/

/

/

/

/

/

Auxiliary Equipment List and Details Description Adapter Manufacturer Model Serial Number Supplied by Certification XIAOMI MDY-08-EZ 2C41803T800050A EMTEK FCC Notes:

1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturers requirements and conditions for the intended use. TRF No.:FCC 15.247/A Page 14 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World 8 FREQUENCY HOPPING SYSTEM REQUIREMENTS 8.1 Standard Applicable According to FCC Part 15.247(a)(1), The system shall hop to channel frequencies that are selected at the system hopping rate from a pseudo randomly ordered list of hopping frequencies. Each frequency must be used equally on the average by each transmitter. The system receivers shall have input bandwidths that match the hopping channel bandwidths of their corresponding transmitters and shall shift frequencies in synchronization with the transmitted signals.

(g) Frequency hopping spread spectrum systems are not required to employ all available hopping channels during each transmission. However, the system, consisting of both the transmitter and the receiver, must be designed to comply with all of the regulations in this section should the transmitter be presented with a continuous data (or information) stream. In addition, a system employing short transmission bursts must comply with the definition of a frequency hopping system and must distribute its transmissions over the minimum number of hopping channels specified in this section.

(h) The incorporation of intelligence within a frequency hopping spread spectrum system that permits the system to recognize other users within the spectrum band so that it individually and independently chooses and adapts its hopsets to avoid hopping on occupied channels is permitted. The coordination of frequency hopping systems in any other manner for the express purpose of avoiding the simultaneous occupancy of individual hopping frequencies by multiple transmitters is not permitted. 8.2 EUT Pseudorandom Frequency Hopping Sequence The channel is represented by a pseudo-random hopping sequence hopping through the 79 RF channels. The hopping sequence is unique for the piconet and is determined by the Bluetooth device address of the master; the phase in the hopping sequence is determined by the Bluetooth clock of the master.The channel is divide into time slots where each slot corresponds to an RF hop frequency. Consecutive hops correspond to different RF hop frequencies. The normal hop is 1 600 hops/s. The pseudorandom sequence may be generated in a nine-stage shift register whose 5th and 9th stage outputs are added in a modulo-two addition stage, and the result is fed back to the input of the first stage. The sequence begins with the first ONE of 9 consecutive ONEs; i.e. the shift register is initialized with nine ones. Number of shift register stages: 9 Length of pseudo-random sequence: 29-1 = 511 bits Longest sequence of zeros: 8 (non-inverted signal) TRF No.:FCC 15.247/A Page 15 of 98 Report No.: ES190605027W01 Ver.1.0 Each frequency used equally on the average by each transmitter. The system receiver have input bandwidths that match the hopping channel bandwidths of corresponding transmitters and shift frequencies in synchronization with the transmitted signals. their Access to the World 8.3 Equal Hopping Frequency Use All Bluetooth units participating in the piconet are time and hop-synchronized to the channel. Example of a 79 hopping sequence in data mode:

35, 27, 6, 44, 14, 61, 74, 32, 1, 11, 23, 2, 55, 65, 29, 3, 9, 52, 78, 58, 40, 25, 0, 7, 18, 26, 76, 60, 47, 50, 2, 5, 16, 37, 70, 63, 66, 54, 20, 13, 4, 8, 15, 21, 26, 10, 73, 77, 67, 69, 43, 24, 57, 39, 46, 72, 48, 33, 17, 31, 75, 19, 41, 62, 68, 28, 51, 66, 30, 56, 34, 59, 71, 22, 49, 64, 38, 45, 36, 42, 53 Each Frequency used equally on the average by each transmitter 8.4 Frequency Hopping System This transmitter device is frequency hopping device, and complies with FCC part 15.247 rule. This device uses Bluetooth radio which operates in 2400-2483.5 MHz band. Bluetooth uses a radio technology called frequency-hopping spread spectrum, which chops up the data being sent and transmits chunks of it on up to 79 bands (1 MHz each; centred from 2402 to 2480 MHz) in the range 2,400-2,483.5 MHz. The transmitter switches hop frequencies 1,600 times per second to assure a high degree of data security. All Bluetooth devices participating in a given piconet are synchronized to the frequency-hopping channel for the piconet. The frequency hopping sequence is determined by the master's device address and the phase of the hopping sequence (the frequency to hop at a specific time) is determined by the master's internal clock. Therefore, all slaves in a piconet must know the master's device address and must synchronize their clocks with the master's clock. Adaptive Frequency Hopping (AFH) was introduced in the Bluetooth specification to provide an effective way for a Bluetooth radio to counteract normal interference. AFH identifies "bad" channels, where either other wireless devices are interfering with the Bluetooth signal or the Bluetooth signal is interfering with another device. The AFH- enabled Bluetooth device will then communicate with other devices within its piconet to share details of any identified bad channels. The devices will then switch to alternative available "good"

channels, away from the areas of interference, thus having no impact on the bandwidth used. TRF No.:FCC 15.247/A Page 16 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World 9 TEST REQUIREMENTS 9.1 20DB BANDWIDTH 9.1.1 Applicable Standard According to FCC Part 15.247(a)(1) and KDB 558074 D01 15.247 MEAS GUIDANCE v05r02 9.1.2 Conformance Limit No limit requirement. 9.1.3 Test Configuration Test according to clause 7.1 radio frequency test setup 1 9.1.4 Test Procedure The EUT was operating in Bluetooth mode and controlled its channel. Printed out the test result from the spectrum by hard copy function. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. Set to the maximum power setting and enable the EUT transmit continuously Set RBW = 30 kHz. Set the video bandwidth (VBW) =100 kHz. Set Span= approximately 2 to 3 times the 20 dB bandwidth Set Detector = Peak. Set Trace mode = max hold. Set Sweep = auto couple. The EUT should be transmitting at its maximum data rate. Allow the trace to stabilize. Use the marker-to-peak function to set the marker to the peak of the emission. Use the marker-delta function to measure 20 dB down one side of the emission. Reset the markerdelta function, and move the marker to the other side of the emission, until it is (as close as possible to) even with the reference marker level. The marker-delta reading at this point is the 20 dB bandwidth of the emission. If this value varies with different modes of operation (e.g., data rate, modulation format, etc.), repeat this test for each variation. Measure and record the results in the test report. Test Results Temperature:

Relative Humidity:

ATM Pressure:

26C 54 1011 mbar Modulation Mode GFSK

/4DQPSK 8DPSK Channel Number 00 39 78 00 39 78 00 39 78 Channel Frequency

(MHz) 2402 2441 2480 2402 2441 2480 2402 2441 2480 20dB Measurement Bandwidth(MHz) 1.020 1.020 1.020 1.363 1.363 1.363 1.363 1.363 1.363 99% Bandwidth

(MHz) 0.925 0.920 0.920 1.229 1.229 1.229 1.220 1.220 1.220 Verdict PASS PASS PASS PASS PASS PASS PASS PASS PASS Note: N/A (Not Applicable) TRF No.:FCC 15.247/A Page 17 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model 20dB Bandwidth Channel 0: 2402MHz GFSK Modulation Access to the World 20dB Bandwidth Test Model Channel 39: 2441MHz GFSK Modulation TRF No.:FCC 15.247/A Page 18 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model 20dB Bandwidth Channel 78: 2480MHz GFSK Modulation Access to the World 20dB Bandwidth Test Model Channel 0: 2402MHz

/4-DQPSK Modulation TRF No.:FCC 15.247/A Page 19 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model 20dB Bandwidth Channel 39: 2441MHz

/4-DQPSK Modulation Access to the World 20dB Bandwidth Test Model Channel 78: 2480MHz

/4-DQPSK Modulation TRF No.:FCC 15.247/A Page 20 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model 20dB Bandwidth Channel 0: 2402MHz 8DPSK Modulation Access to the World Test Model 20dB Bandwidth Channel 39: 2441MHz 8DPSK Modulation TRF No.:FCC 15.247/A Page 21 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model 20dB Bandwidth Channel 78: 2480MHz 8DPSK Modulation Access to the World TRF No.:FCC 15.247/A Page 22 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World 9.2 CARRIER FREQUENCY SEPARATION 9.2.1 Applicable Standard According to FCC Part 15.247(a)(1) and KDB 558074 D01 15.247 MEAS GUIDANCE v05r02 9.2.2 Conformance Limit Frequency hopping systems operating in the 2400-2483.5MHz band shall have hopping channel carrier frequencies separated by a minimum of 25kHz or the 20dB bandwidth of the hopping channel, whichever is greater. In case of an output power less than 125mW, the frequency hopping system may have channels separated by a minimum of 25kHz or two-thirds of the 20dB bandwidth of the hopping channel, whichever is greater. 9.2.3 Test Configuration Test according to clause 7.1 radio frequency test setup 1 9.2.4 Test Procedure Set VBW =300kHz. According to FCC Part15.247(a)(1) The EUT must have its hopping function enabled. Use the following spectrum analyzer settings:

Set the RBW =100kHz. Set the span = wide enough to capture the peaks of two adjacent channels Set Sweep time = auto couple. Set Detector = peak. Allow the trace to stabilize. Use the marker-delta function to determine the separation between the peaks of the adjacent channels. The limit is specified in one of the subparagraphs of this Section. Submit this plot. Test Results Set Trace mode = max hold. Temperature:

Relative Humidity:

ATM Pressure:

26C 54 1011 mbar Modulation Mode GFSK

/4DQPSK 8DPSK 0 39 78 0 39 78 0 39 78 Channel Number Channel Frequency

(MHz) 2402 2441 2480 2402 2441 2480 2402 2441 2480 Measurement Bandwidth

(kHz) 1003 999 1003 1003 999 1003 1003 999 1003 Limit

(kHz)

>680

>680

>680

>909

>909

>909

>909

>909

>909 Verdict PASS PASS PASS PASS PASS PASS PASS PASS PASS Note: Limit >20dB bandwidth * 2/3 TRF No.:FCC 15.247/A Page 23 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Carrier Frequency Separation Channel 0: 2402MHz GFSK Modulation Access to the World Carrier Frequency Separation Test Model Channel 39: 2441MHz GFSK Modulation TRF No.:FCC 15.247/A Page 24 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Carrier Frequency Separation Channel 78: 2480MHz GFSK Modulation Access to the World Test Model Carrier Frequency Separation Channel 0: 2402MHz

/4-DQPSK Modulation TRF No.:FCC 15.247/A Page 25 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Carrier Frequency Separation Channel 39: 2441MHz

/4-DQPSK Modulation Access to the World Test Model Carrier Frequency Separation Channel 78: 2480MHz

/4-DQPSK Modulation TRF No.:FCC 15.247/A Page 26 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Carrier Frequency Separation Channel 0: 2402MHz 8DPSK Modulation Access to the World Test Model Carrier Frequency Separation Channel 39: 2441MHz 8DPSK Modulation TRF No.:FCC 15.247/A Page 27 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Carrier Frequency Separation Channel 78: 2480MHz 8DPSK Modulation Access to the World TRF No.:FCC 15.247/A Page 28 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World 9.3 NUMBER OF HOPPING FREQUENCIES 9.3.1 Applicable Standard According to FCC Part 15.247(a)(1) (iii)and KDB 558074 D01 15.247 MEAS GUIDANCE v05r02 9.3.2 Conformance Limit Frequency hopping systems operating in the 2400-2483.5MHz band shall use at least 15 channels. 9.3.3 Test Configuration Test according to clause 7.1 radio frequency test setup 1 9.3.4 Test Procedure According to FCC Part15.247(a)(1)(iii) The EUT must have its hopping function enabled. Use the following spectrum analyzer settings:

Span = the frequency band of operation (2400-2483.5MHz) RBW 100KHz VBW RBW Sweep = auto Detector function = peak Trace = max hold Allow the trace to stabilize. It may prove necessary to break the span up to sections, in order to clearly show all of the hopping frequencies. Test Results Temperature:

Relative Humidity:

ATM Pressure:

26C 54 1011 mbar Modulation Mode GFSK

/4DQPSK 8DPSK Hopping Channel Frequency Range 2402-2480 2402-2480 2402-2480 Quantity of Hopping Channel Quantity of Hopping Channel limit 79 79 79 15 15 15 TRF No.:FCC 15.247/A Page 29 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Number Of Hopping Frequencies Span: 2400-2483.5MHz GFSK Modulation Access to the World Test Model Number Of Hopping Frequencies Span: 2400-2483.5MHz

/4DQPSK Modulation TRF No.:FCC 15.247/A Page 30 of 98 Report No.: ES190605027W01 Ver.1.0

Test Model Number Of Hopping Frequencies Span: 2400-2483.5MHz 8DPSK Modulation Access to the World TRF No.:FCC 15.247/A Page 31 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World 9.4 AVERAGE TIME OF OCCUPANCY (DWELL TIME) 9.4.1 Applicable Standard According to FCC Part 15.247(a)(1)(iii) and KDB 558074 D01 15.247 MEAS GUIDANCE v05r02 9.4.2 Conformance Limit For frequency hopping systems operating in the 2400-2483.5MHz band, the average time of occupancy on any channel shall not be greater than 0.4s within a period of 0.4s multiplied by the number of hopping channels employed. 9.4.3 Test Configuration Test according to clause 7.1 radio frequency test setup 1 9.4.4 Test Procedure According to FCC Part15.247(a)(1)(iii) The EUT must have its hopping function enabled. Use the following spectrum analyzer settings:

Span = zero span, centered on a hopping channel RBW = 1 MHz VBW RBW Sweep = as necessary to capture the entire dwell time per hopping channel Detector function = peak Trace = max hold If possible, use the marker-delta function to determine the dwell time. If this value varies with different modes of operation (e.g., data rate, modulation format, etc.), repeat this test for each variation. The limit is specified in one of the subparagraphs of this Section. 9.4.5 Test Results Temperature:

Relative Humidity:

ATM Pressure:

26 C 54 1011 mbar Pluse width Modulation Channel Number Packet type DH1 DH3 DH5 Mode GFSK

(ms) 0.394 1.644 2.899 Note: Dwell Time(DH1)=PW*(1600/2/79)*31.6 Dwell Time(DH3)=PW*(1600/4/79)*31.6 Dwell Time(DH5)=PW*(1600/6/79)*31.6 0 0 0 Pluse width Modulation Channel Number Packet type 2DH1 2DH3 2DH5 Mode

/4DQPSK

(ms) 0.412 1.694 2.928 Note: Dwell Time(2DH1)=PW*(1600/2/79)*31.6 Dwell Time(2DH3)=PW*(1600/4/79)*31.6 Dwell Time(2DH5)=PW*(1600/6/79)*31.6 0 0 0 Dwell Time

(ms) 126.08 263.04 309.23 Dwell Time

(ms) 131.84 271.04 312.32 Limit

(ms)

<400

<400

<400 Limit

(ms)

<400

<400

<400 Verdict PASS PASS PASS Verdict PASS PASS PASS TRF No.:FCC 15.247/A Page 32 of 98 Report No.: ES190605027W01 Ver.1.0 Pluse width Modulation Channel Number Packet type 3DH1 3DH3 3DH5 Mode 8DPSK

(ms) 0.412 1.654 2.942 Note: Dwell Time(3DH1)=PW*(1600/2/79)*31.6 Dwell Time(3DH3)=PW*(1600/4/79)*31.6 Dwell Time(3DH5)=PW*(1600/6/79)*31.6 0 0 0 Access to the World Dwell Time

(ms) 131.84 264.64 313.81 Limit

(ms)

<400

<400

<400 Verdict PASS PASS PASS TRF No.:FCC 15.247/A Page 33 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Average Time Of Occupancy (Dwell Time) CH 0: 2402MHz GFSK DH1 Access to the World Test Model Average Time Of Occupancy (Dwell Time) CH 0: 2402MHz GFSK DH3 TRF No.:FCC 15.247/A Page 34 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Average Time Of Occupancy (Dwell Time) CH 0: 2402MHz GFSK DH5 Access to the World Test Model Average Time Of Occupancy (Dwell Time) CH 0: 2402MHz

/4DQPSK 2DH1 TRF No.:FCC 15.247/A Page 35 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Average Time Of Occupancy (Dwell Time) CH 0: 2402MHz

/4DQPSK 2DH3 Access to the World Test Model Average Time Of Occupancy (Dwell Time) CH 0: 2402MHz

/4DQPSK 2DH5 TRF No.:FCC 15.247/A Page 36 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Average Time Of Occupancy (Dwell Time) CH 0: 2402MHz 8DPSK 3DH1 Access to the World Test Model Average Time Of Occupancy (Dwell Time) CH 0: 2402MHz 8DPSK 3DH3 TRF No.:FCC 15.247/A Page 37 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Average Time Of Occupancy (Dwell Time) CH 0: 2402MHz 8DPSK 3DH5 Access to the World TRF No.:FCC 15.247/A Page 38 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World 9.5 MAXIMUM PEAK CONDUCTED OUTPUT POWER 9.5.1 Applicable Standard According to FCC Part 15.247(b)(1) and KDB 558074 D01 15.247 MEAS GUIDANCE v05r02 9.5.2 Conformance Limit The max For frequency hopping systems operating in the 2400-2483.5 MHz band employing at least 75 non-overlapping hopping channels: 1 watt. For all other frequency hopping systems in the 2400-2483.5 MHz band: 0.125 watts. 9.5.3 Test Configuration Test according to clause 7.1 radio frequency test setup 1 9.5.4 Test Procedure According to FCC Part15.247(b)(1) As an alternative to a peak power measurement, compliance with the limit can be based on a measurement of the maximum conducted output power. Use the following spectrum analyzer settings:

Set Span = approximately 5 times the 20 dB bandwidth, centered on a hopping channel (about 10MHz) Set RBW > the 20 dB bandwidth of the emission being measured (about 3MHz) Set VBW RBW Set Sweep = auto Set Detector function = peak Set Trace = max hold Allow the trace to stabilize. Use the marker-to-peak function to set the marker to the peak of the emission to determine the peak amplitude level. Test Results Temperature:

Relative Humidity:

ATM Pressure:

26C 54 1011 mbar Operation Mode GFSK

/4-DQPSK 8DPSK Note:

Channel Number 0 39 78 0 39 78 0 39 78 Channel Frequency

(MHz) 2402 2441 2480 2402 2441 2480 2402 2441 2480 Measurement Level

(dBm)

-0.13 0.98

-0.54 2.00 3.23 1.81 2.33 3.57 2.16 Limit

(dBm) 30 30 30 30 30 30 30 30 30 Verdict PASS PASS PASS PASS PASS PASS PASS PASS PASS TRF No.:FCC 15.247/A Page 39 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Maximum Peak Conducted Output Power Channel 0: 2402MHz GFSK Access to the World Test Model Maximum Peak Conducted Output Power Channel 39: 2441MHz GFSK TRF No.:FCC 15.247/A Page 40 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Maximum Peak Conducted Output Power Channel 78: 2480MHz GFSK Access to the World Test Model Maximum Peak Conducted Output Power Channel 0: 2402MHz

/4DQPSK TRF No.:FCC 15.247/A Page 41 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Maximum Peak Conducted Output Power Channel 39: 2441MHz

/4DQPSK Access to the World Test Model Maximum Peak Conducted Output Power Channel 78: 2480MHz

/4DQPSK TRF No.:FCC 15.247/A Page 42 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Maximum Peak Conducted Output Power Channel 0: 2402MHz 8DPSK Access to the World Test Model Maximum Peak Conducted Output Power Channel 39: 2441MHz 8DPSK TRF No.:FCC 15.247/A Page 43 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Maximum Peak Conducted Output Power Channel 78: 2480MHz 8DPSK Access to the World TRF No.:FCC 15.247/A Page 44 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World 9.6 CONDUCTED SUPRIOUS EMISSION 9.6.1 Applicable Standard According to FCC Part 15.247(d) and KDB 558074 D01 15.247 MEAS GUIDANCE v05r02 9.6.2 Conformance Limit According to FCC Part 15.247(d):

In any 100 kHz bandwidth outside the frequency band in which the spread spectrum intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted, provided the transmitter demonstrates compliance with the peak conducted power limits. 9.6.3 Test Configuration Test according to clause 7.1 radio frequency test setup 1 9.6.4 Test Procedure The transmitter output (antenna port) was connected to the spectrum analyzer Reference level measurement Establish a reference level by using the following procedure:

Set instrument center frequency to DSS channel center frequency. Set Span = approximately 5 times the 20 dB bandwidth, centered on a hopping channel. Set the RBW = 100 kHz. Set the VBW 3 x RBW. Set Detector = peak. Set Sweep time = auto couple. Set Trace mode = max hold. Allow trace to fully stabilize. Use the peak marker function to determine the maximum Maximum conduceted level. Note that the channel found to contain the maximum conduceted level can be used to establish the reference level. Band-edge Compliance of RF Conducted Emissions Use the following spectrum analyzer settings:

Span = wide enough to capture the peak level of the emission operating on the channel closest to the band-edge, as well as any modulation products which fall outside of the authorized band of operation Set RBW 1% of the span=100kHz Set VBW RBW Set Sweep = auto Set Detector function = peak Allow the trace to stabilize. Set the marker on the emission at the bandedge, or on the highest modulation product outside of the band, if this level is greater than that at the bandedge. Enable the marker-delta function, then use the marker-to-peak function to move the marker to the peak of the in-band emission. The marker-delta value now displayed must comply with the limit specified in this Section. Now, using the same instrument settings, enable the hopping function of the EUT. Allow the trace to stabilize. Follow the same procedure listed above to determine if any spurious emissions caused by the hopping function also comply with the specified limit. Conduceted Spurious RF Conducted Emission Use the following spectrum analyzer settings:

Span = wide enough to capture the peak level of the in-band emission and all spurious emissions (e.g., harmonics) from the lowest frequency generated in the EUT up through the 10th harmonic.(30MHz to 25GHz). Set Sweep = auto Allow the trace to stabilize. Set the marker on the peak of any spurious emission recorded. The level displayed must comply with the limit specified in this Section. 9.6.5 Set VBW RBW Set Detector function = peak Set Trace = max hold Set Trace = max hold Set RBW = 100 kHz Test Results TRF No.:FCC 15.247/A Page 45 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Maximum Conduceted Level RBW=100kHz Channel 0: 2402MHz GFSK Access to the World Test Model Conduceted Spurious RF Conducted Emission Channel 0: 2402MHz GFSK TRF No.:FCC 15.247/A Page 46 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Band-edge Conducted Emissions Channel 0: 2402MHz GFSK Access to the World Test Model Maximum Conduceted Level RBW=100kHz Channel 39: 2441MHz GFSK TRF No.:FCC 15.247/A Page 47 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Conduceted Spurious RF Conducted Emission Channel 39: 2441MHz GFSK Access to the World Test Model Maximum Conduceted Level RBW=100kHz Channel 78: 2480MHz GFSK TRF No.:FCC 15.247/A Page 48 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Conduceted Spurious RF Conducted Emission Channel 78: 2480MHz GFSK Access to the World Test Model Band-edge Conducted Emissions Channel 78: 2480MHz GFSK TRF No.:FCC 15.247/A Page 49 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Maximum Conduceted Level RBW=100kHz Hopping GFSK Access to the World Test Model Conduceted Spurious RF Conducted Emission Hopping GFSK TRF No.:FCC 15.247/A Page 50 of 98 Report No.: ES190605027W01 Ver.1.0

Test Model Band-edge Conducted Emissions Hopping GFSK Access to the World Test Model Band-edge Conducted Emissions Hopping GFSK TRF No.:FCC 15.247/A Page 51 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Maximum Conduceted Level RBW=100kHz Channel 0: 2402MHz

/4DQPSK Access to the World Test Model Conduceted Spurious RF Conducted Emission Channel 0: 2402MHz

/4DQPSK TRF No.:FCC 15.247/A Page 52 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Band-edge Conducted Emissions Channel 0: 2402MHz

/4DQPSK Access to the World Test Model Maximum Conduceted Level RBW=100kHz Channel 39: 2441MHz

/4DQPSK TRF No.:FCC 15.247/A Page 53 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Conduceted Spurious RF Conducted Emission Channel 39: 2441MHz

/4DQPSK Access to the World Test Model Maximum Conduceted Level RBW=100kHz Channel 78: 2480MHz

/4DQPSK TRF No.:FCC 15.247/A Page 54 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Conduceted Spurious RF Conducted Emission Channel 78: 2480MHz

/4DQPSK Access to the World Test Model Band-edge Conducted Emissions Channel 78: 2480MHz

/4DQPSK TRF No.:FCC 15.247/A Page 55 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Maximum Conduceted Level RBW=100kHz Hopping

/4DQPSK Access to the World Test Model Conduceted Spurious RF Conducted Emission Hopping

/4DQPSK TRF No.:FCC 15.247/A Page 56 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Band-edge Conducted Emissions Hopping

/4DQPSK Access to the World Test Model Band-edge Conducted Emissions Hopping

/4DQPSK TRF No.:FCC 15.247/A Page 57 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Maximum Conduceted Level RBW=100kHz Channel 0: 2402MHz 8DPSK Access to the World Test Model Conduceted Spurious RF Conducted Emission Channel 0: 2402MHz 8DPSK TRF No.:FCC 15.247/A Page 58 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Band-edge Conducted Emissions Channel 0: 2402MHz 8DPSK Access to the World Test Model Maximum Conduceted Level RBW=100kHz Channel 39: 2441MHz 8DPSK TRF No.:FCC 15.247/A Page 59 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Conduceted Spurious RF Conducted Emission Channel 39: 2441MHz 8DPSK Access to the World Test Model Maximum Conduceted Level RBW=100kHz Channel 78: 2480MHz 8DPSK TRF No.:FCC 15.247/A Page 60 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Conduceted Spurious RF Conducted Emission Channel 78: 2480MHz 8DPSK Access to the World Test Model Band-edge Conducted Emissions Channel 78: 2480MHz 8DPSK TRF No.:FCC 15.247/A Page 61 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Maximum Conduceted Level RBW=100kHz Hopping 8DPSK Access to the World Test Model Conduceted Spurious RF Conducted Emission Hopping 8DPSK TRF No.:FCC 15.247/A Page 62 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Band-edge Conducted Emissions Hopping 8DPSK Access to the World Test Model Band-edge Conducted Emissions Hopping 8DPSK TRF No.:FCC 15.247/A Page 63 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World 9.7 RADIATED SPURIOUS EMISSION 9.7.1 Applicable Standard According to FCC Part 15.247(d) and 15.209 and KDB 558074 D01 15.247 MEAS GUIDANCE v05r02 9.7.2 Conformance Limit According to FCC Part 15.247(d): radiated emissions which fall in the restricted bands, as defined in 15.205(a), must also comply with the radiated emission limits specified in 15.209(a) (see 15.205(c)). According to FCC Part15.205, Restricted bands MHz 0.090-0.110 10.495-0.505 2.1735-2.1905 4.125-4.128 4.17725-4.17775 4.20725-4.20775 6.215-6.218 6.26775-6.26825 8.291-8.294 8.362-8.366 8.37625-8.38675 8.41425-8.41475 12.29-12.293 12.51975-12.52025 12.57675-12.57725 13.36-13.41 MHz 16.42-16.423 16.69475-16.69525 16.80425-16.80475 25.5-25.67 37.5-38.25 73-74.6 74.8-75.2 123-138 149.9-150.05 156.52475-156.52525 156.7-156.9 162.0125-167.17 167.72-173.2 240-285 322-335.4 MHz 399.9-410 608-614 960-1240 1300-1427 1435-1626.5 1645.5-1646.5 1660-1710 2200-2300 2310-2390 2483.5-2500 2690-2900 3260-3267 3332-3339 3345.8-3358 3600-4400 According to FCC Part15.205, the level of any transmitter spurious emission in Restricted bands shall not exceed the level of the emission specified in the following table Restricted Frequency(MHz) Field Strength (V/m) Field Strength (dBV/m) Measurement Distance 0.009-0.490 0.490-1.705 1.705-30 30-88 88-216 216-960 Above 960 Test Configuration 9.7.3 2400/F(KHz) 24000/F(KHz) 20 log (uV/m) 20 log (uV/m) 30 100 150 200 500 29.5 40 43.5 46 54 Test according to clause 7.2 radio frequency test setup 2 9.7.4 Test Procedure This test is required for any spurious emission that falls in a Restricted Band, as defined in Section 15.205. It must be performed with the highest gain of each type of antenna proposed for use with the EUT. Use the following spectrum analyzer settings:

For Above 1GHz:

The EUT was placed on a turn table which is 1.5m above ground plane. Maximum procedure was performed on the highest emissions to ensure EUT compliance. Span = wide enough to fully capture the emission being measured RBW = 1 MHz VBW RBW Sweep = auto Detector function = peak TRF No.:FCC 15.247/A Page 64 of 98 Report No.: ES190605027W01 Ver.1.0 GHz 4.5-5.15 5.35-5.46 7.25-7.75 8.025-8.5 9.0-9.2 9.3-9.5 10.6-12.7 14.47-14.5 15.35-16.2 17.7-21.4 22.01-23.12 23.6-24.0 31.2-31.8 36.43-36.5

(2) 300 30 30 3 3 3 3 Access to the World Trace = max hold For Below 1GHz:

The EUT was placed on a turn table which is 0.8m above ground plane. Maximum procedure was performed on the highest emissions to ensure EUT compliance. Span = wide enough to fully capture the emission being measured RBW = 100 kHz for VBW RBW Sweep = auto Detector function = peak Trace = max hold For Below 30MHz:

The EUT was placed on a turn table which is 0.8m above ground plane. Maximum procedure was performed on the highest emissions to ensure EUT compliance. Span = wide enough to fully capture the emission being measured RBW = 9kHz VBW RBW Sweep = auto Detector function = peak Trace = max hold For Below 150KHz:

The EUT was placed on a turn table which is 0.8m above ground plane. Maximum procedure was performed on the highest emissions to ensure EUT compliance. Span = wide enough to fully capture the emission being measured RBW = 200Hz VBW RBW Sweep = auto Detector function = peak Trace = max hold Follow the guidelines in ANSI C63.10-2013 with respect to maximizing the emission by rotating the EUT, measuring the emission while the EUT is situated in three orthogonal planes (if appropriate), adjusting the measurement antenna height and polarization, etc. A pre-amp and a high pass filter are required for this test, in order to provide the measuring system with sufficient sensitivity. Allow the trace to stabilize. The peak reading of the emission, after being corrected by the antenna factor, cable loss, pre-amp gain, etc., is the peak field strength, which must comply with the limit specified in Section 15.35(b). Submit this data. Now set the VBW to 10 Hz, while maintaining all of the other instrument settings. This peak level, once corrected, must comply with the limit specified in Section 15.209. If the dwell time per channel of the hopping signal is less than 100 ms, then the reading obtained with the 10 Hz VBW may be further adjusted by a duty cycle correction factor, derived from 20log(dwell time/100 ms), in an effort to demonstrate compliance with the 15.209 limit. Submit this data. Repeat above procedures until all frequency measured was complete. 9.7.5 Test Results Spurious Emission below 30MHz (9KHz to 30MHz) Temperature:

Relative Humidity:

ATM Pressure:

26C 54 1011 mbar Freq.

(MHz)

--

Ant.Pol. H/V

--

Emission Level(dBuV/m) AV PK

--

--

Limit 3m(dBuV/m) Over(dB) PK

--

AV

--

PK

--

AV

--

Note: the amplitude of spurious emission that is attenuated by more than 20dB below the permissible limit has no need to be reported. Distance extrapolation factor =40log(Specific distance/ test distance)( dB);

Limit line=Specific limits(dBuV) + distance extrapolation factor TRF No.:FCC 15.247/A Page 65 of 98 Report No.: ES190605027W01 Ver.1.0 Spurious Emission below 1GHz (30MHz to 1GHz) Access to the World TRF No.:FCC 15.247/A Page 66 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 67 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 68 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 69 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 70 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 71 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 72 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 73 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 74 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 75 of 98 Report No.: ES190605027W01 Ver.1.0

Access to the World TRF No.:FCC 15.247/A Page 76 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 77 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 78 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 79 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 80 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 81 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 82 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 83 of 98 Report No.: ES190605027W01 Ver.1.0 Spurious Emission Above 1GHz (1GHz to 25GHz) Test mode:

GFSK Frequency:

Channel 0: 2402MHz Access to the World Ant.Pol. Emission Level(dBuV/m) Over(dB) Freq.

(MHz) 1507.906 7206.000 17989.59 1500.732 7206.000 17968.81 Freq.

(MHz) 1700.812 7323.000 17955.83 1678.348 7323.000 17981.80 H/V V V V H H H H/V V V V H H H PK 46.71 54.51 63.23 46.34 54.46 62.28 PK 46.40 55.13 62.50 46.01 54.37 61.67 AV 32.62 48.63 46.52 32.03 48.02 45.69 AV 31.26 48.85 46.64 31.56 48.24 45.86 Limit 3m(dBuV/m) PK 74 74 74 74 74 74 AV 54 54 54 54 54 54 PK 74 74 74 74 74 74 AV 54 54 54 54 54 54 PK

-27.29

-19.49

-10.77

-27.66

-19.54

-11.72 PK

-27.60

-18.87

-11.50

-27.99

-19.63

-12.33 AV

-21.38

-5.37

-7.48

-21.97

-5.98

-8.31 AV

-22.74

-5.15

-7.36

-22.44

-5.76

-8.14 Test mode:

GFSK Frequency:

Channel 39: 2441MHz Ant.Pol. Emission Level(dBuV/m) Limit 3m(dBuV/m) Over(dB) Test mode:

GFSK Frequency:

Channel 78: 2480MHz Freq.

(MHz) 1608.764 7440.437 17979.20 1668.674 7440.437 17986.99 Ant.Pol. H/V V V V H H H Emission Level(dBuV/m) AV PK 45.61 30.56 48.26 54.52 46.23 62.94 31.26 46.19 45.06 52.59 63.14 46.58 Limit 3m(dBuV/m) Over(dB) PK 74 74 74 74 74 74 AV 54 54 54 54 54 54 PK

-28.39

-19.48

-11.06

-27.81

-21.41

-10.86 AV

-23.44

-5.74

-7.77

-22.74

-8.94

-7.42 TRF No.:FCC 15.247/A Page 84 of 98 Report No.: ES190605027W01 Ver.1.0 Test mode:

/4DQPSK Frequency:

Channel 0: 2402MHz Access to the World Ant.Pol. Emission Level(dBuV/m) Over(dB) Freq.

(MHz) 1507.906 7206.555 17989.59 1500.732 7206.555 17968.81 Freq.

(MHz) 1700.812 7323.000 14826.67 1539.392 7323.092 17981.80 H/V V V V H H H H/V V V V H H H PK 46.21 55.01 62.73 46.34 54.96 63.78 PK 47.90 54.02 61.09 46.48 54.37 64.67 AV 31.69 48.66 46.25 31.56 47.99 46.85 AV 32.25 47.86 46.36 31.84 48.22 48.05 Limit 3m(dBuV/m) PK 74 74 74 74 74 74 AV 54 54 54 54 54 54 PK

-27.79

-18.99

-11.27

-27.66

-19.04

-10.22 PK 74 74 74 74 74 74 AV 54 54 54 54 54 54 PK

-26.10

-19.98

-12.91

-27.52

-19.63

-9.33 AV

-22.31

-5.34

-7.75

-22.44

-6.01

-7.15 AV

-21.75

-6.14

-7.64

-22.16

-5.78

-5.95 Test mode:

/4DQPSK Frequency:

Channel 39: 2441MHz Ant.Pol. Emission Level(dBuV/m) Limit 3m(dBuV/m) Over(dB) Test mode:

/4DQPSK Frequency:

Channel 78: 2480MHz Freq.

(MHz) 1665.301 7440.437 14420.92 1668.674 7440.000 17986.99 Ant.Pol. H/V V V V H H H Emission Level(dBuV/m) PK AV 32.36 47.01 48.05 55.02 43.87 58.76 47.19 33.69 48.14 55.34 62.14 46.24 Limit 3m(dBuV/m) Over(dB) PK 74 74 74 74 74 74 AV 54 54 54 54 54 54 PK

-26.99

-18.98

-15.24

-26.81

-18.66

-11.86 AV

-21.64

-5.95

-10.13

-20.31

-5.86

-7.76 TRF No.:FCC 15.247/A Page 85 of 98 Report No.: ES190605027W01 Ver.1.0 Test mode:

8DPSK Frequency:

Channel 0: 2402MHz Access to the World Ant.Pol. Emission Level(dBuV/m) Over(dB) Freq.

(MHz) 1507.906 7206.555 17989.59 1500.732 7206.555 14994.75 Freq.

(MHz) 1700.812 7323.000 14826.67 1539.392 7323.000 17981.80 H/V V V V H H H H/V V V V H H H PK 46.71 55.01 61.73 47.84 54.46 60.77 PK 46.90 54.52 60.09 46.48 55.04 60.17 AV 31.25 48.51 46.21 32.05 47.99 45.21 AV 31.24 48.09 45.32 32.57 48.24 45.32 Limit 3m(dBuV/m) PK 74 74 74 74 74 74 AV 54 54 54 54 54 54 PK

-27.29

-18.99

-12.27

-26.16

-19.54

-13.23 PK 74 74 74 74 74 74 AV 54 54 54 54 54 54 PK

-27.10

-19.48

-13.91

-27.52

-18.96

-13.83 AV

-22.75

-5.49

-7.79

-21.95

-6.01

-8.79 AV

-22.76

-5.91

-8.68

-21.43

-5.76

-8.68 Test mode:

8DPSK Frequency:

Channel 39: 2441MHz Ant.Pol. Emission Level(dBuV/m) Limit 3m(dBuV/m) Over(dB) Test mode:

8DPSK Frequency:

Channel 78: 2480MHz Freq.

(MHz) 1608.764 7440.437 15101.31 1611.789 7440.000 17986.99 Ant.Pol. H/V V V V H H H Emission Level(dBuV/m) PK AV 31.54 46.61 47.87 54.52 44.28 59.84 46.43 32.06 48.67 55.84 61.64 46.24 Limit 3m(dBuV/m) Over(dB) PK 74 74 74 74 74 74 AV 54 54 54 54 54 54 PK

-27.39

-19.48

-14.16

-27.57

-18.16

-12.36 AV

-22.46

-6.13

-9.72

-21.94

-5.33

-7.76 Note:

(1) All Readings are Peak Value (VBW=3MHz) and Peak Value (VBW=10Hz).

(2) Emission Level= Reading Level+Probe Factor +Cable Loss.

(3) Data of measurement within this frequency range shown -- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. TRF No.:FCC 15.247/A Page 86 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World Spurious Emission in Restricted Band 2310-2390MHz and 2483.5-2500MHz Test mode:

GFSK Frequency:

Channel 0: 2402MHz Frequency

(MHz) 2389.276 2389.408 Polarity H/V H V PK(dBuV/m)

(VBW=3MHz) Limit 3m

(dBuV/m) AV(dBuV/m)

(VBW=10Hz) Limit 3m

(dBuV/m) 49.46 52.95 74 74 36.25 39.02 54 54 Test mode:

GFSK Frequency:

Channel 78: 2480MHz Frequency

(MHz) 2483.580 2483.696 Polarity H/V H V PK(dBuV/m)

(VBW=3MHz) Limit 3m

(dBuV/m) AV(dBuV/m)

(VBW=10Hz) Limit 3m

(dBuV/m) 56.16 60.30 74 74 43.96 45.02 54 54 Test mode:

/4DQPSK Frequency:

Channel 0: 2402MHz Frequency

(MHz) 2389.836 2387.088 Polarity H/V H V PK(dBuV/m)

(VBW=3MHz) Limit 3m

(dBuV/m) AV(dBuV/m)

(VBW=10Hz) Limit 3m

(dBuV/m) 51.93 53.06 74 74 37.23 38.26 54 54 Test mode:

/4DQPSK Frequency:

Channel 78: 2480MHz Frequency

(MHz) 2483.581 2483.582 Polarity H/V H V PK(dBuV/m)

(VBW=3MHz) Limit 3m

(dBuV/m) AV(dBuV/m)

(VBW=10Hz) Limit 3m

(dBuV/m) 57.85 56.84 74 74 42.39 42.05 54 54 Test mode:

8DPSK Frequency:

Channel 0: 2402MHz Frequency

(MHz) 2389.880 2389.716 Polarity H/V H V PK(dBuV/m)

(VBW=3MHz) Limit 3m

(dBuV/m) AV(dBuV/m)

(VBW=10Hz) Limit 3m

(dBuV/m) 51.96 53.51 74 74 36.26 38.26 54 54 Test mode:

8DPSK Frequency:

Channel 78: 2480MHz Frequency

(MHz) 2483.595 2484.011 Polarity H/V H V PK(dBuV/m)

(VBW=3MHz) Limit 3m

(dBuV/m) AV(dBuV/m)

(VBW=10Hz) Limit 3m

(dBuV/m) 57.85 58.04 74 74 43.02 43.06 54 54 Note:

(1) All Readings are Peak Value (VBW=3MHz) and Peak Value (VBW=10Hz).

(2) Emission Level= Reading Level+Probe Factor +Cable Loss.

(3) Data of measurement within this frequency range shown -- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. TRF No.:FCC 15.247/A Page 87 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Spurious Emission in Restricted Band 2310-2390MHz Channel 0: 2402MHz GFSK H Access to the World Test Model Spurious Emission in Restricted Band 2310-2390MHz Channel 0: 2402MHz GFSK V TRF No.:FCC 15.247/A Page 88 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Spurious Emission in Restricted Band 2483.5-2500MHz Channel 78: 2480MHz GFSK H Access to the World Test Model Spurious Emission in Restricted Band 2483.5-2500MHz Channel 78: 2480MHz GFSK V TRF No.:FCC 15.247/A Page 89 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Spurious Emission in Restricted Band 2310-2390MHz Channel 0: 2402MHz

/4DQPSK H Access to the World Test Model Spurious Emission in Restricted Band 2310-2390MHz Channel 0: 2402MHz

/4DQPSK V TRF No.:FCC 15.247/A Page 90 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Spurious Emission in Restricted Band 2483.5-2500MHz Channel 78: 2480MHz

/4DQPSK H Access to the World Test Model Spurious Emission in Restricted Band 2483.5-2500MHz Channel 78: 2480MHz

/4DQPSK V TRF No.:FCC 15.247/A Page 91 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Spurious Emission in Restricted Band 2310-2390MHz Channel 0: 2402MHz 8DPSK H Access to the World Test Model Spurious Emission in Restricted Band 2310-2390MHz Channel 0: 2402MHz 8DPSK V TRF No.:FCC 15.247/A Page 92 of 98 Report No.: ES190605027W01 Ver.1.0 Test Model Spurious Emission in Restricted Band 2483.5-2500MHz Channel 78: 2480MHz 8DPSK H Access to the World Test Model Spurious Emission in Restricted Band 2483.5-2500MHz Channel 78: 2480MHz 8DPSK V TRF No.:FCC 15.247/A Page 93 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World 9.8 CONDUCTED EMISSION TEST 9.8.1 Applicable Standard According to FCC Part 15.207(a) 9.8.2 Conformance Limit Frequency(MHz) 0.15-0.5 0.5-5.0 5.0-30.0 Conducted Emission Limit Quasi-peak 66-56 56 60 Average 56-46 46 50 Note: 1. The lower limit shall apply at the transition frequencies 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 9.8.3 Test Configuration Test according to clause 7.3 conducted emission test setup 9.8.4 Test Procedure The EUT was placed on a table which is 0.8m above ground plane. Maximum procedure was performed on the highest emissions to ensure EUT compliance. Repeat above procedures until all frequency measured were complete. 9.8.5 Test Results Pass The 120V &240V voltagehave been tested, and the worst result recorded was report as below:

TRF No.:FCC 15.247/A Page 94 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 95 of 98 Report No.: ES190605027W01 Ver.1.0 Access to the World TRF No.:FCC 15.247/A Page 96 of 98 Report No.: ES190605027W01 Ver.1.0 9.9 ANTENNA APPLICATION 9.9.1 Antenna Requirement Standard FCC CRF Part 15.203 Access to the World Requirement An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. This requirement does not apply to carrier current devices or to devices operated under the provisions of 15.211, 15.213, 15.217, 15.219, or 15.221. Further, this requirement does not apply to intentional radiators that must be professionally installed, such as perimeter protection systems and some field disturbance sensors, or to other intentional radiators which, in accordance with 15.31(d), must be measured at the installation site. However, the installer shall be responsible for ensuring that the proper antenna is employed so that the limits in this part are not exceeded. For intentional device, according to FCC 47 CFR Section 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. And according to FCC 47 CFR Section 15.247 (b), if transmitting antennas of directional gain greater than 6dBi are used, the power shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6dBi. 9.9.2 Result PASS. The EUT is Integral Antenna, the gain is 0 dBi. Note:

Antenna use a permanently attached antenna which is not replaceable. Not using a standard antenna jack or electrical connector for antenna replacement The antenna has to be professionally installed (please provide method of installation) which in accordance to section 15.203, please refer to the internal photos. TRF No.:FCC 15.247/A Page 97 of 98 Report No.: ES190605027W01 Ver.1.0 Detail of factor for radiated emission Ant_F(dB) Frequency(MHz) 0.009 0.15 1 10 30 20.6 20.7 20.9 20.1 18.8 30 100 300 600 800 1000 1000 3000 5000 8000 10000 12000 15000 18000 18000 21000 25000 28000 31000 34000 37000 40000 11.7 12.5 12.9 19.2 21.1 22.3 25.6 28.9 31.1 36.2 38.4 38.5 40.2 45.4 37.9 37.9 39.3 39.6 41.2 41.5 43.8 43.2 Access to the World Cab_L(dB) 0.03 0.1 0.15 0.28 0.45 Preamp(dB)

\

\

\

\

\

Correct Factor(dB) 20.63 20.8 21.05 20.38 19.25 0.62 1.02 1.91 2.92 3.54 4.17 1.76 3.27 4.2 5.95 6.3 7.14 8.15 9.02 1.81 1.95 2.01 2.16 2.24 2.29 2.30 2.50 27.9 27.8 27.5 27 26.6 26.2 41.4 43.2 44.6 44.7 43.9 42.3 41.4 41.3 47.9 48.7 42.8 46.0 44.5 46.6 46.4 42.2

-15.58

-14.28

-12.69

-4.88

-1.96 0.27

-14.04

-11.03

-9.3

-2.55 0.8 3.34 6.95 13.12

-8.19

-8.85

-1.49

-4.24

-1.06

-2.81

-0.3 3.5

------- End of Report ------

TRF No.:FCC 15.247/A Page 98 of 98 Report No.: ES190605027W01 Ver.1.0