FCC ID: ZDEF41 4.0 MP Wireless Floodlight Camera

D N G Floodlight wiring Bkack White Green/Yellow

(Active)

(Neutral)

(Earth) Rear Panel:

Washer Screw Cap Microphone LED Indicator Lens Passive Infrared

(PIR) Reset Micro SD Card Slot Speaker Installation Example Diagram WiFi connection Floodlight 1. Plug in the power and wait for a few seconds until hearing the Ready for WiFi configuration. Add Device Power the device on until the device voice prompts

"Hella foscam"

Add Device Confirm that the device is in the blue flashing state

Wi-Fi connection The device will added by scanning the QR code and sound waves. video. 8. Tapping on the play button in the video box will jump to the Camera Login setting interface. For your security, please set a new username and password for your camera before viewing live Quick Setup Guide Front Panel:

Junction Box Foam Gasket Wire nut Adiustment Knob Locking Nut Floodlight Camera Locking Collar 2. Make sure that your smart phone is connected to your WiFi router. Tips: If you didnt hear the voice prompt, open the port cover on the back of the camera. Press and hold the Reset button for about 10 seconds to reset the camera. Tap + icon Confirm device flashes blue Enter your WiFi's password and tap "Confirm"

6. Please scan the QR code on the phone screen with the camera, then you will hear a voice prompt say WiFi connecting. Select the checkbox and tap Next. Input AC 100 ~ 240V I have heard Hello Foscam Device flashes blue Next Next 2.4GHz / 5.0GHz Foscam_5G WiFi Password Confirm Foscam_camera On Camera Login New camera username New camera password Re-enter new camera password Submit 2. Access the area you want to be lit and the area you need camera coverage, and install your Floodlight Camera on the front wall or on the side wall. The side wall is highly recommended to get an optimal coverage for the floodlight and camera.

* The motion sensor is more sensitive to the movements across the camera field of view than movements towards or away from the sensor. We highly recommend you install the floodlight camera on the side wall. box. For the best product experience, we suggested installation height of Spotlight camera: 2.5m (8.2 feet), camera downward tilt angle 15. 264 Installing the Junction Box 1. Remove the old Floodlight from the junction box and install the mounting plate to the junction Tip: The junction box and existing electrical wires are required to Floodlight Camera installation. WiFi connection Confirm WiFi xxxxx_2.4G xxxxx_5G Foscam_1 Foscam_2

WiFi connection For WiFi configuration, please point the QR code to the camera directly. I have heard the voice prompt WiFi connecting Next 10~15cm 3.94~5.9in Tap Set a new username and password 9. After completing the above steps, you can begin using your camera. Place the QR code directly in front of the camera Tick the checkbox and tap Next Tips: Please place the QR code on the phone screen about 10 to 15cm (3.94 to 5.9in) away, and if you encounter difficulties you can try to move the screen slowly around 10 15cm (3.94 - 5.9in). 6 4 The concaved side of the mounting plate must face outwards. On the side wall:

2. Peel the backing of the adhesive foam gasket and stick it to the back of the foodlight unit. Support email: support@foscam.com V1.0 305503000573 Whats in the Box Add Device: Connection via the Foscam App (Recommended) It is strongly recommended that you complete the "add devices" process on the Foscam app before the Floodlight hardware is installed. Before You Get Started Scan the QR code below to download and install the Foscam APP. Tips: The camera supports dual-band 2.4GHz and 5GHz WiFi networks, so you can choose the channel with the stronger signal to use. For example, choose your SSID: XXXXX_2.4G or XXXXX_5G. 3. Open the foscam APP and please sign up for a Foscam account, or sign in if you have one already. 7. Wait a few seconds until the camera notifies you that the Wireless connection succeeded, which means your camera has connected to your WiFi successfully. After, you can set the camera name and tap Save in "Set name" interface. 4. After logging into Foscam APP, select Tap to add a camera or "+" icon on the upper right corner, then select "Scan the QR code" and scan the QR code that labeled at the bottom of your camera. Set name Camera added successfully Please set the camera name:

My Camera Save Floodlight Installation Getting Started Note: Make sure you have installed the Foscam App, and have scanned the camera QR code and completed the "add device" process in the app before beginning the hardware installation process. This unit is designed to be mounted on a standard wiring junction box and requires connection to a 100 ~ 240VAC power supply. For optimum results, it is suggested that the installation height of the product should be 8.2ft (2.5m) and the camera should be tilted 15 downward. 1. Shut power off at the breaker in your house. Switch on/off the lights to make sure the electricity in your house is properly shut off. 1 x Floodlight 1 x Junction Box 1 x Foam Gasket Quick Setup Guide Quick Setup Guide Indoor FHD IP Security Camera Wi-Fi Floodlight Security Camera To ensure a smoother video experience on your smart phone, it is recommended that your smart phone meet the following specifications:

iOS: version 11 or higher. Android: 4.1 or higher, using a device with a Graphics Processing Unit (GPU). Note: For the best experience, please update the APP to the latest version!

Tap to add a camera

Add Device

Scan QR Code Scan the QR code Search in LAN Manually add Model: XXX FHD Wireless IP Camera MAC ID:000000000000 Username(default):admin Password(default):(blank) DDNS:XXXXXX. myfoscam.org FCC ID:XXXXX IC:12558A-XX S/N:FIAI1403000001 UID:XXXXXXXXXXX Tap + icon Select Scan the QR code Scan the QR code, located at the bottom of your camera Camera added successfully and the name has been set Note: If the process of adding a camera fails, please reset your camera and try adding again according to the above method. Open the port cover on the back of the camera. Press and hold the Reset button for 10 seconds. OFF 1 x Expansion Screws 1 x Installation Hook 1 x Quick Setup Guide 1 5 7 5. In Add Device, if you hear "Hello Foscam", select the checkbox and tap Next, continue to confirm that the device is in the blue fashing state and tap Next. In WiFi connection, enter your WiFi's password and tap "Confirm", (see illustrations on next page). Reset Note: Risk of shock, disconnect power before servicing. Contains no user serviceable parts. This product must be installed by a licensed electrician in some countries. Check local regulations. Floodlight can be used indoors and outdoors. Move horizontally 8 9 Move towards or leave vertically Move horizontally On the front wall:

Move towards or leave vertically Increased detection range for vertical movement up to 26ft (8m) Increased detection range for horizontal movement up to 33ft (10m) Detection range for vertical movement up to 20ft (6m) Detection range for horizontal movement up to 26ft (8m) 10 11 2 3 12 13 Hang Floodlight Camera 1. Hang Floodlight Camera on the junction box with the hook provided. 3 D N G Mount Floodlight Camera On the Junction Box Adjusting Floodlight Camera 1. Align the hole on the junction box with the opening in the Floodlight Camera. 2. Screw the central screw through the center of Floodlight Camera to mount it in position. 1. After installation is complete, loosen the adjustment screws on the camera and floodlight to adjust the camera and light position to the desired angles. 2. Tighten the screws firmly to complete the installation. Add the IP Camera 1. Run Foscam VMS, then create a local administrator account and login. 2. Tap the "+" icon on the Foscam VMS and follow the setup wizard to add your camera. Please visit foscam.com/downloads to view the user manual and for additional detailed steps. D N G 16 D N G D N G 15 17 2. Connect both ground wires(yellow or green ) from the junction box and Floodlight Camera, join the wires by using a wire nut. If the existing ground wire has been connected to the junction box or there's no ground wire, connect the ground wire of the Floodlight Camera to the junction box or mounting plate directly. 3. Use wire nuts to connect Floodlight Camera wires to the rest of the wires from junction box. Connect the white wire on the Floodlight Camera to the white wire(neutral) from junction box. Connect the black wire on the Floodlight Camera to the black wire(hot) from junction box. 3. Cover the central screw with the central screw cap to prevent it from rusting. Other Ways to Access Your Camera Important Notice Camera Username & Password D N G D N G 18 19 Foscam VMS Foscam VMS is a new tool for PCs. It does not require plug-ins and is compatible with Windows &

Mac, supporting all Foscam HD cameras and up to 36 cameras at the same time. If you would like to manage multiple cameras, we suggest you install Foscam VMS. You can download the Foscam VMS Windows version from foscam.com/vms, and can download the "Foscam VMS" Mac version from the APP store: https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12 The camera username & password are used to access and manage your camera. Having a strong password can significantly improve the security of your camera. If you have forgotten either of them, please press the "Reset" button and hold it for more than 10 seconds while the camera is powered on. After hearing the voice prompt, release the button. The doorbell will automatically reboot and the default settings will be restored. You can then reconnect the camera by following this Quick Setup Guide. Note: For the best experience, please update Foscam VMS to the latest version!

Foscam Cloud Service Account Username & Password Product Performance WLAN frequency range: 2412MHz - 2472MHz and 5725MHz - 5850MHz Wireless Standard: IEEE802.11b/g/n (2.4GHz) / IEEE802.11a/n/ac (5GHz) Protected dimensions: 320(L)x 170(W)x220(H) (W)mm Weight: 1260g Power Supply: AC 100 - 240V ~ 50/60 Hz Maximum protected area: 0.0252m Technical Support CE Certificate statement Website:

https://www.foscam.com/company/ce-certificate.html Exporter and Importer Information Opened to Public:

https://www.foscam.com/company/open-information.html Your Foscam Cloud service account and password may be used to access both the Foscam App and the Foscam Cloud service website. Therefore, you can register your account username &

password on either one. StorageMedia Your camera supports cloud, NVR (Network Video Recorder), and Micro SD card (only supports FAT-32 format) storage formats. If you wish to record and play back large amounts of video, we recommend using a Foscam NVR device as well. If you have problems with your Foscam device, please contact the reseller you purchased from, or you can e-mail the company headquarters technical support team: support@foscam.com Manufacturer: Shenzhen Foscam Intelligent Technology Co., Ltd Addr: Room 901-902, Building 1B, Xingke 1st Street, Shenzhen International Innovation Your valuable comments and suggestions on improving Foscam products are welcomed!

Valley, Nanshan Dist., Shenzhen, 518055, China YouTube www.foscam.com Support email: support@foscam.com 23 FAQ Foscam APP Installation video on YouTuBe standard. 25 Due to product upgrades and other reasons, this guide may be slow to update, resulting in slight inconsistencies with the official website information. Please take the official website (www.foscam.com) information as the current 20 21 26 27 Firmware Upgrades You can upgrade the firmware of your camera with the Foscam App by using the new One-Key-Online Upgrade feature (Open the Foscam App and Login to the camera, select Settings > Firmware Upgrade). You also can download the latest version to upgrade your camera from our official website foscam.com/upgrades. Safety Tips Please ensure that the proper power supply is used before using the camera. Please install the camera and bracket securely using the screws provided. Please use this product within the temperature range -4F~122F (-20C~50C). When the ambient temperature is too high or too low, it may cause product failure. To avoid the risk of fre or electric shock, please keep your camera connectors in a cool, dry place Please keep the camera out of reach of small children. This product is not a toy; children should use the product under adult supervision. Change your default port to a greater range to help ensure the safety of your connection. How to change the default port: please visit foscam.com/downloads to view the user manual. Check the logs of your Foscam camera frequently. Foscam camera have embedded logs telling you which IP addresses are accessing the camera. 22 The floodlight source of this luminaire is not replaceable; when the floodlight source reaches its end of life the whole luminaire shall be replaced. 24 FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ201104010-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

ShenZhen Foscam Intelligent Technology Co., Ltd. Address: Room 901, Unit B, Building 7, Xingke 1st Street, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, China Email: dqe@foscam.com Tel: 0755-26745668-8230 Pr oduct Similar ity Declar ation Date: 2020-11-17 To:

Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 Dear Sir/Madam, We, ShenZhen Foscam Intelligent Technology Co., Ltd., hereby declare that we have a product named as 4.0MP Wireless Floodlight Camera, (model: F41, FCC ID: ZDEF41) was tested by BACL, Meanwhile, for our marketing purpose, we would like to list a series model

(FLCFLC1FLC2FLC3F21F22F42F43F44F45MFS4010MFS4011 MFS4012MFS4013) on reports and certificate, all the models are identical in schematics. Only the model name is different. No other changes are made on them. We confirm that all information above is true, and well be responsible for all the consequences. Please contact me if you have any question. Sincerely, Signature:

Printed Name: David Tu Title: Manager

ShenZhen Foscam Intelligent Technology Co., Ltd. Address: Room 901, Unit B, Building 7, Xingke 1st Street, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, China Email: dqe@foscam.com Tel: 0755-26745668-8230 FCC Authorization Date: 2020-11-17 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We ShenZhen Foscam Intelligent Technology Co., Ltd., the undersigned, hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Dow oll Tu David Tu Manager QA-FR-170-B 7/29/2014

ShenZhen Foscam Intelligent Technology Co., Ltd. Address: Room 901, Unit B, Building 7, Xingke 1st Street, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, China Email: dqe@foscam.com Tel: 0755-26745668-8230 FCC Confidential Authorization Date: 2020-11-17 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: ZDEF41 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, ShenZhen. Foscam Intelligent Technology Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:

e Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Dah ol Te David Tu Manager

ShenZhen Foscam Intelligent Technology Co., Ltd. Address: Room 901, Unit B, Building 7, Xingke 1st Stree, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, China Tel: 0755-26745668-8230 Email: dqe@foscam.com Date: 2021-01-11 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, The Main chip, model: RTL8822CS, installed in our product 4.0MP Wireless Floodlight Camera, model: F41, FCC ID: ZDEF41, this chip supports 2.4G Wi-Fi, 5G Wi-Fi

(5150~5250MHz, 5250~5350MHz, 5470~5725MHz, 5725~5850MHz ) and Bluetooth function, but for marketing purpose, the Bluetooth and 5G Wi-Fi (5150~5250MHz, 5250~5350MHz, 5470~5725MHz) were disabled to use by manufacture in the software, the end user has no capability to activate it. Signature:

David Tu Manager