FCC ID: ZDEC2M HD IP Camera

Setting Up Your Foscam Security Camera B. Physical Description C. Setting Up Your Camera:

Wired Connection via Foscam App

(Recommended) Quick Setup Guide HD IP Camera A. Getting Started Package Contents Lens LAN Microphone Micro SD Card Slot WPS/Reset Power light/

Network light Power IP Camera AC Adapter Ethernet Cable Quick Setup Guide Indoor FHD IP Security Camera USB Power Cable Quick Steup Guide Warning:

To view this guide in other languages (e.g. Espaol, Franais, Deutsch, Nederlands), and for detailed manuals, tools, etc., please visit foscam.com/downloads. Security Tips Please change the password of your camera regularly, using a combination of numbers, letters and special characters. We recommend that you regularly update your camera to the latest available software and firmware versions to help ensure the best experience for your camera. V1.1 The cords on this product presents a potential strangulation hazard. For child safety, please keep these cords out of the reach of children. Note: We highly recommend that you first begin the setup process by connecting your camera to your Internet router with an Ethernet cable. After setup is successful, youll be able to unplug the cable and login to your wireless network for WiFi operability. Minimum Requirements: To help ensure a smoother video experience on the smartphone, its recommended that your smartphone has the following:

iOS: version 8.1 or higher. Android: 4.1 or higher, using a device with a Graphics Processing Unit (GPU) function. Foscam

Scan QR Code Tap to add a camera Tap + button Scan the QR code which is located at the bottom of your camera. Camera Setup Steps 1. Connect the camera to your Internet router using an Ethernet cable. 2. Connect the power adapter to the camera, and wait for a few moments until the camera alerts you that the Wired connection succeeded. 3. From your smartphone, search for Foscam via the App Store or Google Play Store. Download, install and open the App to begin configuration. 4. Under Foscam select Tap to add a camera and then select

"Camera", after that scan the QR code, which is located at the bottom of your camera (see illustrations below). 5. On the Choose Setup Method screen, confirm that Wired is selected (upper-left corner) and tap Ready for Wired Connection. Wait a few moments for a message confirming that the setup process has been completed (see illustrations below).

Choose Setup Method Wired Wi-Fi Add Cameras Camera added successfully!

Ready for Wired Connection Confirm Wired and then tap Ready for Wired Connection Camera added successfully!

D. Connecting Your Camera Over WiFi E. Other Ways to Access Your Camera F. Hardware Installation G. Important Notice Once youve added your camera successfully using the wired connection method above, tap your live camera feed from the My Cameras screen tap the gear in the upper-right tap Network tap the WiFi network you wish to connect to and enter your WiFi password. Foscam Cloud Service Foscam Cloud You can access the camera via the Foscam Cloud website:

www.myfoscam.com Some of the benefits of viewing your camera in the cloud:

Its simple and convenient to remotely access and manage all your WiFi security cameras. Enjoy the latest features first through Foscam Cloud including cloud storage, video sharing, and more. Getting started is fastif you have already registered an account through Foscam App, you can directly use your login credentials for Foscam Cloud. Web User Interface

(e.g.Internet Explorer/Edge/Chrome/Firefox/Safari) If you would like to manage your camera more professionally, we suggest you access your camera via browser. You can download the Equipment Search Tool from foscam.com/tools to your computer, then access the camera directly. Foscam VMS If you would like to manage multiple cameras, we suggest you install the Foscam VMS. You can download the Foscam VMS from foscam.com/vms. 264 a b 0~360 Camera Username & Password Firmware Upgrades The camera username & password are used to access and manage your camera. Having a strong password can improve the security of your camera significantly. If you have forgotten either of them, please press and hold the

"Reset" button on the camera while its powered on to restore it to factory default settings. After hearing the voice prompt, release the button. The camera will automatically reboot and the default settings will be restored. The default username / password will then become admin / (blank), respectively. After restoring to the factory default settings, please delete the camera from Foscam App, and then add it again. Foscam Cloud Service Account Username & Password Your Foscam Cloud service account and password may be used to access both Foscam App and the Foscam Cloud service website. Therefore, you may register the account username & password on either one. StorageMedia Your camera supports cloud, NVR (Network Video Recorder), and Micro SD card (only supports FAT-32 format) storage formats. If you wish to record and playback large amounts of video, we recommend using a Foscam NVR device as well. You can upgrade the firmware of your camera with Foscam App by using the new one-key-Online Upgrade feature (Open Foscam App, select Settings > Firmware Upgrade). You also can download the latest version to upgrade your camera from our official website foscam.com/upgrades. Safety Tips Please ensure that the proper power supply is used before using the camera. Please install the camera and bracket securely using the screws provided. To avoid the risk of fire or electric shock, please keep your camera in a cool, dry place. Please keep the camera out of reach of small children. Change your default port to a greater range to help ensure the safety of your connection. Check the logs of your Foscam cameras frequently. Foscam Cameras have embedded logs reminding you which IP addresses are accessing the camera. a b 1. Rotate the base of the camera until points a and b are aligned, this allows for the mounting plate to be removed. 2. Install the mounting plate on a wall or ceiling with supplied fixing screws. 3. Align points a and b to insert the camera base to the mounting plate. Rotate so that points a and b are no longer aligned, this attaches the camera securely to the base. FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Foscam_2.4G

Network Foscam_5G Cherry Public Lily Note:

The camera supports dual-band 2.4GHz & 5GHz WiFi, the speed of 5GHz WiFi is high but the penetrability is weak, so we suggest you use the 2.4GHz WiFi when there is a wall.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. LABEL AND LOCATION HD IP Camera Model No.: C2M FCC ID:ZDEC2M Made In China

(Size: L3.0m x 2.0cm) Label Location Material: Tagboard Glue: adhesive sticker Font color: White Label color: Black _____________________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 1

ShenZhen Foscam Intelligent Technology Co., Ltd. Agent Authorization Company: ShenZhen Foscam Intelligent Technology Co., Ltd. Address: 9/F, Block F5, TCL International E City, No.1001 ZhongShanyuan Rd., NanShan District, Shenzhen, China Product Name: HD IP Camera Trade Mark: FOSCAM Model Number(s): C2M FCC ID:ZDEC2M We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

David Tu Title:

Manager Date: 2020-06-11 Company: ShenZhen Foscam Intelligent Technology Co., Ltd.

ShenZhen Foscam Intelligent Technology Co., Ltd. Add: 9/F, Block F5, TCL International E City, No.1001 ZhongShanyuan Rd., NanShan District, Shenzhen, China Tel:

Fax:

Date: 2020-06-11 Dear Sir/Madam, We, ShenZhen Foscam Intelligent Technology Co., Ltd. Hereby declares the following statement , PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product name:HD IP Camera Model No.:C2M, C2M*, ICS2010, ICS2011, ICS2012, ICS2013, C2 VX, C1 VX, C2M VX, C2S VX, ICS2010VX, ICS2011VX, ICS2012VX, ICS2013VX, FC1600P, FC1600P V

(Notes: V indicates the software version, x=0,1 ,2,3,4,5,6,7,8,9. When x=0, V0 is blank by default, and * indicates the small version is indentified by letters) Sincerely, Clients name / title :

Contact information / address : 9/F, Block F5, TCL International E City, No.1001 David Tu / Manager ZhongShanyuan Rd., NanShan District, Shenzhen, China Tel: 86-755-26745668 E-Mail: dqe@foscam.com Fax: /

ShenZhen Foscam Intelligent Technology Co., Ltd. FCC Software Configuration Control Declaration Date: June 11, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product Name: HD IP Camera Model Number: C2M, C2M*, ICS2010, ICS2011, ICS2012, ICS2013, C2 VX, C1 VX, C2M VX, C2S VX, ICS2010VX, ICS2011VX, ICS2012VX, ICS2013VX, FC1600P, FC1600P V

(Notes: V indicates the software version, x=0,1 ,2,3,4,5,6,7,8,9. When x=0, V0 is blank by default, and * indicates the small version is indentified by letters) Regarding FCC Country Code Selection guidelines identified in KDB 594280 D01 Software Configuration Control v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: David Tu Date: 2020-06-11 Title: Manager Signature of applicant FCC Software Configuration Control Declaration Rev1.1

ShenZhen Foscam Intelligent Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: ZDEC2M Date: 2020-06-11 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Software Security Requirements For U-NII Devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. External Photos Test Setup Photos Internal Photos User Manual Sincerely, Signature:

Name: David Tu Title: Manager