FCC ID: ZDEFI9805W HD Wireless IP Camera

UserUser Manual Manual Model: FI9805W HDWirelessIPCamera wwww.foscam.co ww.foscam.comm Table of Contents 1 Overviews................................................................................................................................................................ 3 1.1 Key Features..................................................................................................................................................................... 3 1.2 Read Before Use.............................................................................................................................................................. 4 1.3 Packing Contents.............................................................................................................................................................. 4 1.4 Physical Description......................................................................................................................................................... 5 2 Accessing the Network Camera........................................................................................................................... 7 2.1 Access the Camera in LAN............................................................................................................................................. 7 2.2 Access the Camera in WAN.......................................................................................................................................... 11 2.3 Using the VLC player..................................................................................................................................................... 17 3 Surveillance Software GUI.................................................................................................................................. 20 3.1 Login Window.................................................................................................................................................................. 20 3.2 Surveillance Window...................................................................................................................................................... 22 4 Advanced Camera Settings................................................................................................................................ 28 4.1 Device Status.................................................................................................................................................................. 28 4.1.1 Device Information.................................................................................................................................................. 28 4.1.2 Device Status........................................................................................................................................................... 29 4.1.3 Session status......................................................................................................................................................... 29 4.1.4 Log............................................................................................................................................................................ 30 4.2 Basic Settings................................................................................................................................................................. 31 4.2.1 Camera Name......................................................................................................................................................... 31 4.2.2 Camera Time........................................................................................................................................................... 31 4.2.3 Mail Settings............................................................................................................................................................ 32 4.2.4 User Accounts.......................................................................................................................................................... 34 4.2.5 Multi-Camera........................................................................................................................................................... 36 4.3 Network............................................................................................................................................................................ 41 4.3.1IP Configuration........................................................................................................................................................ 41 4.3.2 PPPoE...................................................................................................................................................................... 43 4.3.3 DDNS........................................................................................................................................................................ 43 4.3.4WiFi............................................................................................................................................................................ 48 4.3.5 UPnP......................................................................................................................................................................... 50 4.3.6 Port........................................................................................................................................................................... 50 4.4 Video................................................................................................................................................................................. 56 4.4.1 Settings..................................................................................................................................................................... 56 4.4.2 On Screen Display.................................................................................................................................................. 57 4.4.3 Snapshot Settings................................................................................................................................................... 58 4.5 Alarm................................................................................................................................................................................ 59 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 1 1 wwww.foscam.co ww.foscam.comm 4.6 Record.............................................................................................................................................................................. 63 4.7 Path Settings................................................................................................................................................................... 63 4.8 Firewall............................................................................................................................................................................. 65 4.9 System.............................................................................................................................................................................. 66 4.9.1 Back up& Restore settings.................................................................................................................................... 66 4.9.2 System upgrade...................................................................................................................................................... 66 4.9.3Factory Reset........................................................................................................................................................... 68 4.9.4 Reboot System........................................................................................................................................................ 68 5 Phone APPs...................................................................................................................................................... 69 5.1 APP for Android cell phones......................................................................................................................................... 69 5.2 APP for iPhones.............................................................................................................................................................. 77 6 APPENDIX............................................................................................................................................................ 84 6.1 Frequently Asked Questions......................................................................................................................................... 84 6.2 Default Parameters........................................................................................................................................................ 90 6.3 Specification.................................................................................................................................................................... 90 6.4 CE & FCC........................................................................................................................................................................ 92 6.5 WARRANTY.................................................................................................................................................................... 92 7 OBTAINING TECHNICAL SUPPORT.............................................................................................................. 96 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 2 2 wwww.foscam.co ww.foscam.comm 11 Overviews Overviews FOSCAM FI9805W is an integrated wireless IP Camera with a color CMOS sensor enabling viewing resolution 1280*720. It combines a high quality digital video camera, with a powerful web server, to bring clear video to your desktop from anywhere on your local network or over the Internet. FI9805W supports the industry-standard H.264 compression technology, drastically reducing file sizes and conserving valuable network bandwidth. The IPCAM is based on the TCP/IP standard. There is a WEB server inside which could support Internet Explore. Therefore the management and maintenance of your device is simplified by using the network to achieve the remote configuration and start-up. The camera is designed for indoor and outdoor surveillance applications such as courtyards, supermarket,and school. Controlling the IPCAM and managing images are simplified by using the provided web interface across the network utilizing wireless connectivity. FOSCAM provides Phone APPs for Android and iPhone users, please search Foscam ip cam viewer and install it through APP Store, then you can view your camera directly as a computer. 1.11.1 KeyKey Features Features Standard H.264 video compression algorithm to satisfy the transmission of high definition video in narrow bandwidth network 1.0 Mega-Pixel Supports IE/Firefox/Google/Safari browser or any other standard browsers Supports WEP,WPA and WPA2 Encryption Wi-Fi compliant with wireless standards IEEE 802.11b/g/n IR night vision (Range:30m) Supports image snapshot Supports dual-stream Supports IR-Cut and the filter change automatically Embedded FOSCAM DDNS(dynamic domain name service) Service Supports remote viewing & record from anywhere anytime Multi-level users management with password protection Motion detection alert via email or upload image to FTP Supporting Third Party Domain name Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 3 3 wwww.foscam.co ww.foscam.comm Providing Phone APPs for Android and iPhone users Supports multiple network protocols: HTTP /HTTPS/ RTSP/ TCP /IP /UDP /FTP /DHCP

/DDNS / UPNP Providing Central Management Software to manage or monitor multi-cameras 1.21.2 ReadRead Before Before UseUse Please first verify that all contents received are complete according to the Package Contents listed below. Before the Network Camera is installed, please carefully read and follow the instructions in the Quick Installation Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly as intended. 1.31.3 Packing Packing Contents Contents IPCAM1 Wi-Fi Antenna1 DC Power Supply1 Mounting bracket1(option) Network Cable1 CD1 Quick Installation Guide 1 Warranty Card1 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 4 4 wwww.foscam.co ww.foscam.comm 1.41.4 Physical Physical Description Description Front Panel Figure 1.1 1 WIFI Antenna: Wireless Antenna 2 Infrared LED: 36 IR LEDs 3 LENS: CMOS sensor with fixed focus lens 4 Induction IC Interface 1 2 3 4 1 2 3 4 5 Figure 1.2 1 Reset button : Press and hold on the reset button for 5 seconds. Releasing the reset button, the password will back to the factory default administrator password. The default administrator user is admin with no password. 2 Audio input interface: The jack is used to plug external microphone. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 5 5 wwww.foscam.co ww.foscam.comm 3 Audio output interface: The jack is used to plug external speakers. 4LAN: 10/100M adaptive Ethernet interface. Through this interface, IPCAM can be connected with various network devices, such as hub, router, etc. 5Power Interface: Connect the external power adapter, request for 12V/2A power. Bottom View There are up to three labels located at the bottom of the camera; this is an important feature of original Foscam cameras. If your camera does not have labels as shown in Figure 1.3, it may be a clone. Cloned Foscam cameras can not use original firmware and are not eligible for warranty or technical services. MAC address of wireless connection MAC address of wired connection FOSCAM DDNS Service S/N Sticker of FOSCAM Figure 1.3 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 6 6 wwww.foscam.co ww.foscam.comm 22 Accessing Accessing thethe Network Network Camera Camera This chapter explains how to access the network camera through web browsers and RTSP players. Access thethe Camera 2.12.1 Access This camera support HTTP and HTTPS protocols, so here will allow you to use HTTP and HTTPS port no. Camera inin LANLAN

(1) Http:// LAN IP + Http Port no. Double click the IP Camera Tool icon and it should find the cameras IP address automatically after you plug in the network cable. Double click the IP address of the camera; your default browser will open to the camera login page. Figure 2.1

(2) Https:// LAN IP + Https Port no. The default Https port no. is 443. You can use the url to access the camera: https:// LAN IP +

HTTPS port. Go to Settings - Network - Port panel , you can see and change the https port no. Sometimes you need to add the url to the Trusted Sites, Figure 2.2 Open Internet Explorer if it is not already opened. Click on Tools, then click Internet Options. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 7 7 Next, click the Security tab, then click the Trusted sites button. wwww.foscam.co ww.foscam.comm Figure 2.3 For Firefox, you can add the trusted as the following way:

Tools ---- Options ---- Advanced --- View Certificates --- Servers Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 8 8 wwww.foscam.co ww.foscam.comm 9 9 Click View Certificates, and go to Servers option. Figure 2.4 Figure 2.5 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited Go to Add Exception panel. wwww.foscam.co ww.foscam.comm Enter the cameras url , here take https://192.168.8.129:443 for example Click this button to add it Figure 2.6 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 10 10 wwww.foscam.co ww.foscam.comm 2.2.22 Access Access thethe Camera Camera inin WANWAN 2.2.1 Static IP Addresses Users who have static IP addresses do not need to set DDNS service settings for remote access. When you have finished connecting the camera using the LAN IP address and port forwarding, you can access the camera directly from the Internet using the WAN IP address and port number. How to Obtain the WAN IP address from a public website To obtain your WAN IP address, enter the following URL in your browser:

http://www.whatismyip.com.The webpage at this address will show you the current WAN IP. Access your IP Camera from the Internet Figure 2.7 You can access the IP Camera from the Internet (remote access). Enter the WAN IP address and port number in your standard browser. For example, you would enter http://

183.37.28.254:85 Note Make sure port forwarding is successful. You can do port forwarding two ways. 1) Login to your router to enable the UPNP function. You can then login to the camera as administrator, choose Network, and then choose UPnP to enable UPnP. Make sure that the status of UPnP reads UPnP Successful on the Device Status page. 2) Do port (HTTP port and Media port) forwarding manually. (See Figure 2.11 for further details) If your router has a Virtual Server, it can do port forwarding. Add the cameras LAN IP and port Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 11 11 wwww.foscam.co ww.foscam.comm which you had set earlier to your routers port forwarding settings. Note: If you plug the camera into a router, it will have a dynamic IP address and you need to set DDNS service settings to view it remotely. 2.2.2 Dynamic IP Addresses DDNS is a service that allows your IP Camera, especially when assigned with a dynamic IP address, to have a fixed host and domain name. This means that even though your WAN IP address is constantly changing, you will have a fixed hostname you can use to access your cameras at all times. You can access the camera directly from the Internet using the hostname and port number. What is the HTTP Port no.?

1) Default HTTP Port is 88 All cameras have the default HTTP port of 88. For example, if the LAN IP link of the camera is http://192.168.8.102:88, this means that the cameras HTTP port is 88. You can change port 88 to another port if youd like such as 2000 or 8090, which will not be conflict with other existing ports like 25, 21,10000.Here you can set the port no. between 1 and 65535. 2) Change the default http no.88 to another one. How to assign a different HTTP Port No. and fixed the LAN IP of the camera by the IP Camera Tool Step 1: Open the IP Camera Tool, select the camera you would like to change the port of, right click on the IP address, and click on Network Configuration, this brings up the network configuration box as shown in Figure 2.8 and 2.9. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited Select which camera youd like to change the port for, and right click 12 12 wwww.foscam.co ww.foscam.comm Modify the Http Port. Enter the Username and password, click OK. Figure 2.8 Figure 2.9 Step 2: Enter the username and password of the Administrator (default username is admin with a blank password), and click OK to apply changes. Step 3: Wait around 10 seconds, youll see that the cameras LAN IP address has changed. In our example it was changed to 2000, so we see http://192.168.8.102:2000 in IP Camera Tool. Also, the LAN IP address is now fixed at a static IP address of http://192.168.8.102:2000. This IP address will not change even if the camera is powered off and back on, the camera will remain on this LAN IP address. This is very important that a static LAN IP address is set, or you may have problems later with remote access and seeing the camera remotely if the camera loses power and reconnects on a different LAN IP address. Make sure you set a static LAN IP address!

Figure 2.10 What is Port forwarding?

If you have never done port forwarding before, you can open and view the following link to understand the basic concept. Port forwarding allows for outside connections to access a specific device on your network from anywhere in the world. Every router automatically blocks Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 13 13 wwww.foscam.co ww.foscam.comm any incoming connections for safety purposes. Using port forwarding, you are telling your router to allow a connection through a certain port (you can think of it as a gateway) into your router. You set this port to a specific device, in our case an IP Camera, so it can be accessed from anywhere in the world. Click this link to learn more about port forwarding: http://portforward.com/help/portforwarding.htm How do we configure Port Forwarding?

For this section, we will be using an example:

Lets say the cameras LAN IP address is http://192.168.8.100:2000 Step 1: Login to the router, and go to your routers port forwarding or port triggering menu. Sometimes this is also under the name of Virtual Server or NAT. Using the Linksys brand router as an example, we would log into the router, and go to the Applications & Gaming menu. We would then click on the Single Port Forwarding sub-menu. Step 2: Create a new column using the LAN IP address & HTTP Port of the camera within the router as shown below, then push OK or Submit to save your settings:

Fill the HTTP Port of the camera in the columns of External Port and Internal Port. Example: 2000 Assign a name for the port forward setting here Figure 2.11 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited Fill in this section with the LAN IP of the camera; we would enter 100 for our example. 14 14 wwww.foscam.co ww.foscam.comm First method :

Use the embedded DDNS to access the camera via the Internet Each Foscam camera has an embedded unique DDNS domain name, the format of this domain name is xxxxxx.myfoscam.org. On the bottom of the camera, you can see the domain name sticker with this information on it. For example, we can use test09.myfoscam.org. In the camera, click Settings at the top, click Network on the left, then click DDNS to get to the DDNS settings page. Here you can see the unique domain name of your camera. Figure 2.12 Now you can use http://Domain name + HTTP Port to access the camera via the Internet. Take hostname test09.myfoscam.org and HTTP Port of 2000 for example, the URL link to access the camera via the Internet would be http:// test09.myfoscam.org:2000. Second method :

Use the Third party DDNS to access the camera via the Internet Step 1, Please go to the third party DDNS website(such as www.no-ip.com) to create a free hostname. Step 2, DO DDNS Service Settings within the Camera Please set DDNS Settings within the camera by hostname, a user name and password youve got from www.no-ip.com Take hostname ycxgwp.no-ip.info, user name foscam, password foscam2012 for example. Firstly, goes to option of DDNS Settings on the administrator panel. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 15 15 Secondly, select No-Ip as a server. wwww.foscam.co ww.foscam.comm fill foscam as DDNS user, Thirdly, fill ycxgwp.no-ip.info as DDNS domain and server URL, Then click save to make effect. The camera will restart and to take the DDNS settings effective. fill password foscam2012 as DDNS password, login the camera, and go to option of Device Status on the Fourthly, after the restart, administrator panel, and check if the DDNS status is successful. If failed, please double check if you have input the correct hostname, user name, and password, and try to redo the settings. Note If you have set Third Party DDNS successfully ,the Foscam Domain Name will be invalid. The Third Party DDNS and the Foscam Domain Name cannot work at the same time, the last time you configured will take effect. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 16 16 wwww.foscam.co ww.foscam.comm 2.2.33 Using ThisThis camera Using thethe VLCVLC player player camera supports supports RTSPRTSP streaming, streaming, herehere youyou cancan viewview thethe camera camera using using VLCVLC player. player. RTSP URL rtsp:// [user name][:password]@IP:HTTP port number/videosream The part in the square brackets may be omitted. user name & password:

The user name and password to access the camera. This part can be omitted. IP:

WAN or LAN IP address. Videostream:

Here support three mode: videoMain, videoSub and audio. When the network speed is bad, here you had better select videoSub. If you select audio, you can only hear the sound but cannot see the video. For example:

IP: 192.168.1.11 HTTP Port number: 88 User name: admin Password: 123 Here I can enter one of the following URLs in the VLC. 1) rtsp://admin:123@192.168.1.11:88/videoMain 2) rtsp:// @192.168.1.11:88/videoMain 3) rtsp://:123@192.168.1.11:88/videoMain 4) rtsp://admin@192.168.1.11:88/videoMain Open the VLC, and go to MediaOpen Network Stream option, then enter the URL into VLC. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 17 17 wwww.foscam.co ww.foscam.comm Figure 2.13 Figure 2.14 Sometimes you may need to enter the user name and password again. Click OK and you can see the real-time preview. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 18 18 wwww.foscam.co ww.foscam.comm Figure 2.15 Figure 2.16 If you cannot play the video in the VLC player, please check the port mapping. You can read Quick Installation Guide about How to configure port forwarding. NOTE:

If you modify the cameras username or password, you had better reboot the camera, or else the new username and password cannot take effect when you enter the authentication in the VLC. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 19 19 wwww.foscam.co ww.foscam.comm 33 Surveillance Surveillance Software Software GUIGUI Please refer to the Quick Installation Guide if you install the camera at first time. After finishing quick installation, you can take time to learn the operation of the software. 3.13.1 Login Login Window Window 1 2 3 4 Figure 3.1 Please check the login window above, it was divided to 4 sections from no. 1 to 4. Section1 Enter the User name and password The default administrator username is admin with no password, please reset the password at first using and prevent unauthorized users login the camera (read chapter 3.2.4 about how to change). Section2 Stream The camera supports two stream modes: Main stream and sub stream. If you want to access the camera form LAN, here you can select Main stream. If you want to access the camera from Internet, here we recommend sub stream. Note: When the network bandwidth is badly youd better select Sub Stream and the video will be more fluency. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 20 20 wwww.foscam.co ww.foscam.comm Section3 Select the language You can select the language you need via click on the language dropdown list to switch. Section4 Login the camera Click Login button and you will see the surveillance windows. Figure 3.2 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 21 21 wwww.foscam.co ww.foscam.comm 6 3.2 Surveillance Window 1 2 3 4 5 Section1 FOSCAM Logo/ LiveVideo / Settings buttons Figure 3.3 7

: FOSCAM LOGO

: Path to surveillance window. Click this button and back to the surveillance window

: Path to Administrator Control Panel, Click it, and it will lead to Administrator Control Panel and do advanced settings. Section2 Multi-Device Window The firmware inside the camera supports up to maximum of 9 cameras being monitoring at the same time. You can add other cameras in multi-camera panel (read chapter 4.2.5). Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 22 22 wwww.foscam.co ww.foscam.comm Figure 3.4 Section3 Mode/ Stream / Mirror/ Flip buttons Mode 1) 50HZ ---------Indoor surveillance (Region: Europe, China) 2) 60HZ ---------Indoor surveillance (Region: USA, Canada) Stream The default Stream supports four modes: 0/720P/30fps/2M, 1/VGA/25fps/4M, 2/VGA/ 15fps/ 1M and 3/ VGA/10fps/200 The format of the stream type is Stream type no. / Resolution /

Maximum frame rate/ Bit rate 1) Stream type no. : The number is used to identify the stream type. 2) 720P/ VGA There are two resolutions, the bigger one is 720P, and the smaller one (VGA) is 640x480 pixels. The bigger the resolution, the better of the image quality is. If you are accessing the camera via internet and want to get more fluent video streaming, please select resolution VGA. 3) Maximum frame rate When the video format is 50Hz, the maximum frame rate is 25 fps. When the video format is 60Hz, the maximum frame rate is 30 fps. You should lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve fluently video. 4) Bit rate Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should combine well with the network bandwidth. When the bandwidth is very Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 23 23 wwww.foscam.co ww.foscam.comm narrow, and bit rate is large, that will lead to video cannot play well. You can reset the stream type on Settings-> Video-> Settings panel( chapter 4.4.1). After changing, please re-login the camera and you can see the modification. Section4 IR LED Lights Click IR LED Lights and there are two modes to adjust the infrared led: Auto and Off . The default mode is Auto. Auto: Select it and the camera will adjust the infra led (on or off) automatically. Off: Select it and turn off the infra led manually. Section5 Image quality settings In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality. Section6 OSD If you have added time and camera name in the video, you can see it in the live window. Go to Settings ---Basic settings---Camera name panel, and you can change another device name. The default device name is anonymous. Go to Settings ---Basic settings---Camera time panel and adjust the device time. Go to Settings ---Video---On Screen Display panel, you can add or no add OSD. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 24 24 Section7 Play/Stop/ Talk/Audio/ Snap/ Record/ Full screen button wwww.foscam.co ww.foscam.comm 1 2 3 4 1------Play Click it to play the video of the camera 2------Stop Click it to stop the video of the camera 5 6 7 3------ Talk: Click the button and the icon will become to

, then talk to the microphone that connected with PC, people around the camera can hear your voice if the camera has connected with audio output device. Click the icon again and stop talking. 4------ Audio Click the button and the icon will become to the camera if the camera has connected with other audio input device through the Audio Input port of the camera, Click the icon again and stop audio.

, you can hear the sound around 5----- Snap: Click it to make snapshot and it pop up a window which picture you snapshot, right click in the window and save the picture to anywhere you want. and the camera start recording, you can see a green dot in the 6----- Record: Click the icon live window. Click again and stop recording. The default storage path is C:\IPCamRecord. You can change the storage path: Go to Settings- >Record-> Storage Location panel. 7------Full Screen Click it to make full-screen, or you can double click the surveillance screen to make full-screen. Double click again and exit full-screen. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 25 25 wwww.foscam.co ww.foscam.comm Onscreen Mouse Control Right click the mouse and you can adjust the screen ration, full screen and Zoom up. Figure 3.6 Keep ration: Select it and the camera will adjust the size of live window based on the computer monitor automatically. Sometimes there is a black border around the video (Figure 3.7), please select Keep ration to get a better visual quality (Figure3.3). Full Screen: Select it and Click it to make full-screen, press ESC and exit full-screen. Figure 3.7 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 26 26 Zoom up/down: Click it and the live view will be digital zoomed up, then click Zoom Down and the live view back to original size. wwww.foscam.co ww.foscam.comm Figure 3.8 NOTE:

1 This camera dont support Pan/Tilt function, so here cannot allow to use Screen PTZ. 2 For Mac OS, the plugin cannot support Onscreen Mouse function, so you cannot allow to use it. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 27 27 wwww.foscam.co ww.foscam.comm Advanced Camera 44 Advanced Click the button Settings, goes to Administrator Control Panel to make advanced camera settings. Camera Settings Settings 4.1 Device Status Device Status contains four columns: Device Information, Device Status, Session Status and Log, it will show you various information about your camera. 4.1.1 Device Information Figure 4.1 Camera Name: The Device Name is a unique name that you can give to your device to help you identify it. Click Basic Settings and go to Device Name panel where you can change your camera name. The default device name is anonymous. Camera ID: Display the MAC address of your camera. For example Device ID is 008414350787, the same MAC ID sticker is found at the bottom of the camera. Camera Time: The system time of the device. Click Basic Settings and go to Camera Time panel and adjust the time. System Firmware version: Display the System Firmware version of your camera. App Firmware version: Display the application firmware version of your camera. Web version: Display the web UI version of your camera Plug-in version: Display the plug-in version of your camera Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 28 28 wwww.foscam.co ww.foscam.comm 4.1.2 Device Status On this page you can see device status such as Alarm status, NTP/DDNS status, WIFI status and so on. Figure 4.2 4.1.3 Session status Session status will display who and which IP is visiting the camera now. Figure 4.3 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 29 29 wwww.foscam.co ww.foscam.comm 4.1.4 Log The log record shows who and which IP address accessed or logout the camera and when. Click the page number and go to the corresponding page to see more logs Fill in one page number, click Go button and go to the corresponding page Figure 4.4 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 30 30 wwww.foscam.co ww.foscam.comm 4.2 Basic Settings This section allows you to configure your Camera Name, Camera Time, Mail, User Accounts and Multi-Device. 4.2.1 Camera Name Default alias is Anonymous. You can define a name for your camera here such as apple. Click Save to save your changes. The alias name cannot contain special characters. Figure 4.5 4.2.2 Camera Time This section allows you to configure the settings of the internal system clocks for your camera. Figure 4.6 Time Zone: Select the time zone for your region from the dropdown menu. Sync with NTP server: Network Time Protocol will synchronize your camera with an Internet time server. Choose the one that is closest to your camera. Sync with PC: Select this option to synchronize the date and time of the Network Camera with your computer. Manually: The administrator can enter the date and time manually. Please select the date and Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 31 31 wwww.foscam.co ww.foscam.comm time format. Click Save button to submit your settings. 4.2.3 Mail Settings If you want the camera to send emails when motion has been detected, here Mail will need to be configured. 5 2 3 4 1 6 Figure 4.7 1----- SMTP Server/ Port /Transport Layer Security Enter SMTP server for sender. SMTP port is usually set as 25. Some SMTP servers have their own port, such as 587 or 465, and Transport Layer Security usually is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be set to 465 or 25 or 587, which port you choose should be decided by which Transport Layer Security you select. 2-----SMTP Username/ password: ID account and password of the sender email address 3----- Sender E-mail Mailbox for sender must support SMTP 4----- Receiver Mailbox for receiver need not support SMTP, you can set 4 receivers 5----Save Click Save to take effect 6----Te st Click Test to see if Mail has been successfully configured. Click Test to see if Mail has been successfully configured. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 32 32 wwww.foscam.co ww.foscam.comm Test result Figure 4.8 If the test success, you can see the Success behind the Test, at the same time the receivers will receive a test mail. Figure 4.9 If the test fails with one of the following errors after clicking Test, verify that the information you entered is correct and again select Test . 1) Cannot connect to the server 2) Network Error. Please try later 3) Server Error Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 33 33 wwww.foscam.co ww.foscam.comm 4) Incorrect user or password 5) The sender is denied by the server. Maybe the server need to authenticate the user, please check it and try again 6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server 7) The message is denied by the server. Maybe because of the anti-spam privacy of the server 8) The server does not support the authentication mode used by the device 4.2.4 User Accounts Here you can create users and set privilege, visitor, operator or administrator. The default administrator user accounts are admin with a blank password. Figure 4.10 How to change the password?

Firstly, select the account which you want to change the password, then select Change password, enter the old password and the new password, lastly click modify to take effect. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 34 34 wwww.foscam.co ww.foscam.comm How to add account ?

Figure 4.11 Select one blank column, then enter the new user name, password and privilege, last click Add to take effect. You can see the new added account on the Account list. Figure 4.12 Figure 4.13 Delete Select the account which you want to delete, then click Delete button to take effect. Note: The default administrator account cannot be deleted, but you can add other administrator users. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 35 35 wwww.foscam.co ww.foscam.comm 4.2.5 Multi-Camera If you want to view multi-surveillance screens on one window, you need to login one camera, and set it as the main device, and do Multi-Device Settings, add other cameras to the first one camera. Before you do multi-cams settings, you need to assign different port such as 81, 82, 83, 84, 85, 86, 87, 88 to the cameras if there is 8 cams installed. The firmware within the camera can support a maximum of 9 devices monitoring all at the same time. This page you can both add FOSCAM MJPEG and H.264 series cameras to the first camera and view multi-surveillance screen on one window. Add cameras in LAN In Multi-Device Settings page, you can see all devices searched in LAN. The 1st Device is the default one. You can add more cameras in the list in LAN for monitoring. The cameras software supports up to 9 IP Cameras online simultaneously. Click The 2nd Device and click the item in the Device List in LAN, the Alias, Host and Http Port will be filled in the boxes below automatically. Enter the correct username and password then click Add. Add more cameras in the same way. 1 Click it, camera model, alias, host and HTTP Port will be 1 Click it, camera model, alias, filled in the following boxes host and HTTP Port will be automatically filled in the following boxes ll i 3 Click Add to take effect 3 Click Add to take effect Figure 4.14 2 Enter 2 Enter password of the 2nd camera password of the 2nd camera the User name and the User name and Camera Model: Our Company produces two series cameras: MJPEG and H.264. Here will show Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 36 36 you which series the camera belongs to. wwww.foscam.co ww.foscam.comm Back to Surveillance Windows, and click Four Windows option, you will see four cameras you added. Figure 4.15 Figure 4.16 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 37 37 wwww.foscam.co ww.foscam.comm Figure 4.17 Add cameras in WAN If you want to view all cameras via the internet(remote computer), you will need to add them using DDNS domain name. Firstly, make sure all of the cameras you added can be accessed through the internet. (Read How to configure DDNS settings in chapter 4.3.3) Login to the first camera using a DDNS domain name and port. Use DDNS domain name and port to login Make sure each camera you need add could login with DDNS name and port Figure 4.18 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 38 38 Click Multi-Device Settings. Choose The 2nd Device. Fill in the 2nd cameras name, DDNS domain name, port number. Enter user name and password and then choose Add. (Figure 3.19) wwww.foscam.co ww.foscam.comm 1 2 3 4 5 Figure 4.19 1----- The camera model: MJ or H264. 2----- The 2nd cameras name 3----- Fill in the 2nd cameras DDNS host not LAN IP NOTE: The FI89s series have the same HTTP Port no. and Media Port no. 4 ---- Enter the 2nd cameras user name and password 5---- Click Add button and to take effect NOTE: Here the Host must be entered as the second cameras DDNS domain name, not its LAN IP. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 39 39 wwww.foscam.co ww.foscam.comm Figure 4.20 Return to video window. You will see all of the cameras accessible through the internet. When you are away from home, you can use the first cameras DDNS domain name and port to view all the cameras via internet. Figure 4.21 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 40 40 wwww.foscam.co ww.foscam.comm 4.34.3 Network Network This section will allow you to configure your cameras IP, PPOE, DDNS, Wireless Settings, UPnP and Port. 4.3.1IP Configuration If you want to set a static IP for the camera, please go to IP Configuration page. Keep the camera in the same subnet of your router or computer. Figure 4.22 Changing settings here is the same as using the IP Camera Tool. (Figure 4.23/4.24) It is recommended that you use the subnet mask, gateway and DNS server from your locally attached PC. If you dont know the subnet mask, gateway and DNS server, you can check your computers local area connection as follows:

Control Panel Network Connections Local Area Connections Choose SupportDetails. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 41 41 wwww.foscam.co ww.foscam.comm Figure 4.23 If you dont know the DNS server, you can use the same settings as the Default Gateway. Figure 4.24 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 42 42 wwww.foscam.co ww.foscam.comm 4.3.2 PPPoE If you are using a PPPoE connection, enable it and enter the User Name and Password for your PPPoE account. Figure 4.25 4.3.3 DDNS FOSCAM camera has embedded a unique DDNS domain name when producing, and you can directly use the domain name, you can also use the third party domain name. FOSCAM domain name Here take test09.myfoscam.org for example. Go to option of DDNS on the Settings->Network panel, you can see the domain name. Figure 4.26 Now you can use http:// Domain name + HTTP Port to access the camera via internet. Take hostname test09.myfoscam.org and HTTP Port no. 8000 for example, the accessing link of the camera via internet would be http:// test09.myfoscam.org:8000 Restore DDNS to factory: If you have configured Third Party DDNS successfully, but you want to use Manufacturers DDNS again , here click this button and start Manufacturers DDNS Service. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 43 43 wwww.foscam.co ww.foscam.comm Third Party Domain Name Settings User can also use third part DDNS, such as www.no-ip.com. ,www. 3322.com Here take www.no-ip.com for example:

Step 1, Go to the website www.no-ip.com to create a free hostname Firstly: Login on www.no-ip.com and click No-IP Free to register. Click here to register Figure 4.27 Please register an account step by step according to instructions on www.no-ip.com After registration, please login your email which used to register. You will receive an email from website, please click the link to activate your ACCOUNT as indicated in email. Secondly: Login the link with the registered username and password to create your domain name. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 44 44 wwww.foscam.co ww.foscam.comm Figure 4.28 Figure 4.29 Please create the domain name step by step according to instructions on www.no-ip.com Step 2, DO DDNS Service Settings within the Camera Please set DDNS Settings within the camera by hostname, a user name and password youve got from www.no-ip.com Take hostname ycxgwp.no-ip.info, user name foscam, password foscam2012 for example. 45 Intelligent Technology Technology Co.,Co., Limited Limited Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 45 wwww.foscam.co ww.foscam.comm Firstly, goes to option of DDNS Settings on the administrator panel. Secondly, select No-Ip as a server. fill foscam as DDNS user, Thirdly, fill ycxgwp.no-ip.info as DDNS domain and server URL, Then click save to make effect. The camera will restart and to take the DDNS settings effective. fill password foscam2012 as DDNS password, login the camera, and go to option of Device Status on the Fourthly, after the restart, administrator panel, and check if the DDNS status is successful. If failed, please double check if you have input the correct hostname, user name, and password, and try to redo the settings. Note If you have set Third Party DDNS successfully ,the Foscam Domain Name will be invalid. The Third Party DDNS and the Foscam Domain Name cannot work at the same time, the last time you configured will take effect.

Do port forwarding within the router Example: The cameras LAN IP address is http://192.168.8.100:2000 Firstly, login the router, goes to the menu of Port Forwarding or Port Trigger (or named Virtue Server on some brands of router). Take Linksys brand router as an example, Login the router, and goes to Applications & Gaming->Single Port Forwarding. Secondly, Create a new column by LAN IP address & HTTP Port No. of the camera within the router showed as below. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 46 46 wwww.foscam.co ww.foscam.comm Fill the LAN IP of the camera here, just input the last section Figure 4.30

Use domain name to access the camera via internet After the port forwarding is finished, you can use the domain name+ http no. to access the camera via internet. Take hostname ycxgwp.no-ip.info and http no. 2000for example, the accessing link of the camera via internet would be http:// ycxgwp.no-ip.info:2000 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 47 47 wwww.foscam.co ww.foscam.comm 4.3.4WiFi Step 1: Choose Settings on the top of the camera interface, and go to the Network panel on the left side of the screen, then click Wireless Settings. Click the Scan button and the camera will detect all wireless networks around the area. It should also display your router in the list (Figure 4.31). Click the Scan button to search for wireless networks. Click the Page number to see other wireless networks devices if there are more than 10. Figure 4.31 Step 2: Click the SSID (name of your router) in the list, the corresponding information related to your network, such as the name and the encryption, will be filled into the relevant fields automatically. You will only need to fill in the password of your network. Make sure that the SSID, Encryption and the password you filled in are exactly the same for your router. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 48 48 wwww.foscam.co ww.foscam.comm 2 Enter password your router the of 1 Click the SSID of your router and the relevant information will be filled in the fields automatically. Figure 4.32 Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable. Never shut down the power of the camera until the IP camera is able to connect to the wireless network. The LAN IP address will disappear on the window of IP Camera Tool when the camera is configuring a wireless connection. Wait about 1 minute, the camera should obtain a wireless connection, and the LAN IP of the camera will show again on the window of the IP Camera Tool. The IP address may have changed after the camera receives a wireless connection; we recommend setting a static local IP address if this IP address changes by right clicking the camera in IP Camera Tools, setting a static IP, and pushing OK (see Figure3.35/3.36). Congratulations! You have set up the wireless connection of the camera successfully. Note If you fail to make a wireless connection, please refer to your seller or contact us directly for assistance. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 49 49 4.3.5 UPnP wwww.foscam.co ww.foscam.comm The default UPnP status is closed. You can enable UPnP, then the cameras software will be configured for port forwarding. Back to the Device Status panel, you can see the UPnP status:

The cameras software will be configured for port forwarding. There may be issues with your routers security settings, and sometimes may error. We recommend you configure port forwarding manually on your router (Figure 4.30). Figure 4.33 4.3.6 Port This camera supports HTTP Port / Media Port / HTTPS Port. The Media port is used to view the cameras video stream, HTTP Port is used to access the camera remotely. Here HTTP and Media port share the same port. HTTP port / Media port: By default, the HTTP and Media port is set to 88. Also, they can be assigned with another port number between 1 and 65535. But make sure they canl not be conflict with other existing ports like 25, 21. Figure 4.34 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 50 50 wwww.foscam.co ww.foscam.comm Another way to change the HTTP port no. Step 1: Open the IP Camera Tool, select the camera you would like to change the port of, right click on the IP address, and click on Network Configuration, this brings up the network configuration box as shown in Figure 4.35 and 4.36. Select which camera youd like to change the port for, and right click Figure 4.35 Modify the Http Port. Enter the Username and password, click OK. Figure 4.36 Step 2: Enter the username and password of the Administrator (default username is admin with a blank password), and click OK to apply changes. Step 3: Wait around 10 seconds, youll see that the cameras LAN IP address has changed. In our example it was changed to 2000, so we see http://192.168.8.102:2000 in IP Camera Tool. Also, the LAN IP address is now fixed at a static IP address of http://192.168.8.102:2000. This IP address will not change even if the camera is powered off and back on, the camera will remain on this LAN IP address. This is very important that a static LAN IP address is set, or you may Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 51 51 have problems later with remote access and seeing the camera remotely if the camera loses power and reconnects on a different LAN IP address. Make sure you set a static LAN IP address!

wwww.foscam.co ww.foscam.comm Note: 1 Http port and Media port must be different. 2 If the camera cannot be accessed, please make sure the port forwarding is succeed. HTTPS port: The default port is 443. You can use the url to access the camera: https:// IP +

HTTPS port. Sometimes you need to add the url to the Trusted Sites, Open Internet Explorer if it is not already opened. Click on Tools, then click Internet Options. Next, click the Security tab, then click the Trusted sites button. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 52 52 wwww.foscam.co ww.foscam.comm RTSP function RTSP URL rtsp:// [user name][:password]@IP:HTTP port number/videosream The part in the square brackets may be omitted. user name & password:

The user name and password to access the camera. This part can be omitted. IP:

WAN or LAN IP address. Videostream:

Here support three mode: videoMain, videoSub and audio. When the network speed is bad, here you had better select videoSub. If you select audio, you can only hear the sound but cannot see the video. For example:

IP: 192.168.1.11 HTTP Port number: 88 User name: admin Password: 123 Here I can enter one of the following URLs in the VLC. 5) rtsp://admin:123@192.168.1.11:88/videoMain 6) rtsp:// @192.168.1.11:88/videoMain Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 53 53 wwww.foscam.co ww.foscam.comm 7) rtsp://:123@192.168.1.11:88/videoMain 8) rtsp://admin@192.168.1.11:88/videoMain Open the VLC, and go to MediaOpen Network Stream option, then enter the URL into VLC. Sometimes you may need to enter the user name and password again. Click OK and you can see the real-time preview. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 54 54 wwww.foscam.co ww.foscam.comm If you cannot play the video in the VLC player, please check the port mapping. You can read Quick Installation Guide about How to configure port forwarding. NOTE:

If you modify the cameras username or password, you had better reboot the camera, or else the new username and password cannot take effect when you enter the authentication in the VLC. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 55 55 wwww.foscam.co ww.foscam.comm 4.4 Video This section allows you to configure Video stream settings, On screen display and Snapshot settings. 4.4.1 Settings Figure 4.37 Stream type: There are four types to identify different streams you have set. Resolution: The camera supports two types: 720P, VGA. The higher the resolution is, the clearer video will become. But the code flux will become larger too, and it will take up more bandwidth. Bit rate: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is large, that will lead to video can not play well. Frame rate: Note that a larger frame size takes up more bandwidth. When the video format is 50Hz, the maximum frame rate is 25 fps. When the video format is 60Hz, the maximum frame rate is 30 fps. You should lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve fluently video. Key Frame Interval: The time between last key frame and next key frame. The shorter the duration, the more likely you will get a better video quality, but at the cost of higher network bandwidth consumption. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 56 56 4.4.2 On Screen Display This page is used to add timestamp and device name on the video. wwww.foscam.co ww.foscam.comm Figure 4.38 Display timestamp: There are two options: Yes or NO. Select Yes and you can see the system date on the video, Display device name: There are two options: Yes or NO. Select Yes and you can see the device name on the video, Allow osd mask: There are two options: Yes or NO. Select yes and draw a mask area on the video, the mask area will be black on the video. The mask area Figure 4.39 Click Back button and return to the OSD page, click Save to take effect. Back to the surveillance window, you can see the mask area as the following picture:

Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 57 57 wwww.foscam.co ww.foscam.comm Figure 4.40 4.4.3 Snapshot Settings On this page you can set the snapshot pictures image quality and the storage path. Figure 4.41 Image Quality: Low, Middle and High. The higher the quality, the picture will be clearer. Save Path: FTP. If you have done FTP and Alarm settings, when alarming, the camera will snap pictures to the FTP automatically. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 58 58 wwww.foscam.co ww.foscam.comm 4.5 Alarm IP Camera supports Motion Detection Alarm, when the motion has been detected, it will send emails or upload images to FTP. 1 7 2 3 4 5 6 Figure 4.42 To enable motion detection, follow the steps below:

1 Enable Motion detection 2 Sensitivity---- It supports three modes: Low, Middle and High. The higher the sensitivity, the camera will be more easily alarmed. Select one motion sensitivity. 3 Trigger interval--- The interval time between two motion detections. Here supports 5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time. 5 Select the alarm indicators When the motion has been detected, the alarm status will turn to Detect alarm. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 59 59 wwww.foscam.co ww.foscam.comm There are three alarm indicators:

A Ring If the camera has connected with a speaker or other audio output device, if you select Ring, when the motion has been detected, the people around the camera will hear beep alarm sound. B Send Mail If you want to receive alarm emails when motion is detected, you must select Send Mail and set Mail Settings first. The alarm email cannot contain the alarm picture if you have not selected Snap picture. C Snap picture If you select this checkbox, when the motion has been detected, the camera will snap the live view window as a still picture and load it to the FTP. If you select Send Email, at the same time the picture will be send to you as an attachment. Make sure you have set FTP and set FTP as the storage path in Video->Snapshot Settings panel. Capture interval: The interval time between two pictures. 5 Set detect area Click set detect area and it pop up a window, then you can draw the detection area. Click Back button after settings. When something moving in the detection area, the camera will alarm. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 60 60 wwww.foscam.co ww.foscam.comm Figure 4.43 6 Alarm Schedule

Alarm anytime when motion is detected Click the black button up the MON, you will see all time range turn red. When something moving in the detection area at anytime, the camera will alarm. Click this button and select all time range Figure 4.44

Specify an alarm schedule Click the week day words, the corresponding column will be selected. For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, when something Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 61 61 moving in the detection area, the camera will alarm wwww.foscam.co ww.foscam.comm Figure 4.45

Press the left mouse and drag it on the time boxes, you can select the serial area, Figure 4.46 7 Click Save button to take effect. When the motion is detected during the detection time in the detection area, the camera will alarm and adopt the corresponding alarm indicators. NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and anytime. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 62 62 wwww.foscam.co ww.foscam.comm 4.6 Record On this page you can change the manually recording storage path, the default storage path is C:\IPCamRecord. Figure 4.47 4.7Path Settings If you want to upload record images to your FTP serveryou can set FTP Settings. Figure 4.48 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 63 63 wwww.foscam.co ww.foscam.comm Figure 4.49 FTP server: If your FTP server is located on the LAN, you can set as Figure 4.48. If you have an FTP server which you can access on the internet, you can set as Figure 4.49. Port: Default is port 21. If changed, external FTP client program must change the server connection port accordingly. FTP Mode: Here supports two modes: PORT and PASV. Username/password: The FTP account and password. Click Save to take effect. Click Test to see if FTP has been successfully configured. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 64 64 wwww.foscam.co ww.foscam.comm 4.8 Firewall This section explains how to control the access permission by checking the client PCs IP addresses. It is composed of the following columns: Block access from these IP addresses and Only allow access from these IP addresses. Figure 4.50 Enable firewall, If you select Only allow access from these IP addresses and fill in 8 IP addresses at most, only those clients whose IP addresses listed in the Only allow access from these IP addresses can access the Network Camera. If you select Block access from these IP addresses, only those clients whose IP addresses are in the IP list cannot access the Network Camera. Click Save to take effect. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 65 65 wwww.foscam.co ww.foscam.comm 4.9System In this panel, you can back up/restore your camera settings, upgrade the firmware to the latest version, restore the camera to default settings and reboot the device. 4.9.1 Back up& Restore settings Click Backup to save all the parameters you have set. These parameters will be stored in a bin file for future use. Click Browse and select the parameters file you have stored, then click Submit to restore the restore the parameters. Figure 4.51 4.9.2 System upgrade Click Browse, choose the correct bin file( System firmware or Web UI) and then click System upgrade. Dont shut down the power during upgrade. After upgrading, you can see the upgrade result. Figure 4.52 If you want to verify the firmware version of you camera, please go to Device Status- Device Information Page to check Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 66 66 wwww.foscam.co ww.foscam.comm Upgrade Firmware by IP Camera Tool

, select the Camera IP that you want to Double click the IP Camera Tool shot icon upgrade the firmware. Then select Upgrade Firmware and enter the username and password, choose the firmware file, and upgrade. Figure 4.53 Figure 4.54 Enter the User name and password CAUTION: If your camera works well with the current firmware, we recommend not upgrading. Please dont upgrade the firmware unnecessarily. Your camera may be damaged if misconfigured during an upgrade. NOTE:

1) Dont upgrade the firmware through the web UI in WAN, or else the upgrade may be falied. 2) Please ensure you have download the correct firmware package for your camera before Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 67 67 wwww.foscam.co ww.foscam.comm upgrading. Read the upgrade documentation (readme.txt file) in the upgrade package before you upgrade. 3) Upon downloading the firmware check the sizes of the .bin files. They must match the size in the readme.txt file. If not, please download the firmware again until the sizes are the same. Your camera will not function correctly if a corrupt .bin file is used. 4) Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device Firmware. 5) Never shut down the power of the camera during upgrade until the IP camera restart and get connected. 6) After upgrade successfully, please clear the cache of browser, uninstall the old plugin and re-install it, then reset the camera to the default factory settings before using the camera. 4.9.3Factory Reset Click Factory Reset button and all parameters will return to factory settings if selected. Figure 4.55 4.9.4 Reboot System Click Reboot System to reboot the camera. This is similar to unplugging the power to the camera. Figure 4.56 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 68 68 wwww.foscam.co ww.foscam.comm 55 Phone Phone APPsAPPs With Phone APPs , you can view your camera directly as a computer anywhere, anytime. This section shows the user how to set up the iPhone, and Android mobile phones to view Foscam cameras with Phone APPs. 5.1 APP for Android cell phones There are two ways to install the phone App :

1) Search the APP Foscam ip cam viewer in the Google Play directly if your cell phone has installed Google Play. Figure 5.1 Download and install the phone view app, then you can see the shortcut icon in your cell phone screen. 2) Enter http://play.google.com in the URL field of the browser, then search the APP Foscam ip cam viewer. Download and install the APP. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 69 69 Click the shortcut icon and login Phone APP. wwww.foscam.co ww.foscam.comm Default user name is admin with a blank password Figure 5.2 Enter the user name and password then click Login button, you can see the following surveillance windows:

1 2 3 Figure 5.3 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 70 70 wwww.foscam.co ww.foscam.comm The default surveillance window is black, you need to add devices to it and then connect the device. Please check the login window above, it was divided to 3 sections from no. 1 to 3. Section1 Exit / Go to Device List Buttons Click this icon and exit Phone App Click this icon and back to Device List page to add cameras to the software Section2 Live view window If the camera supports PT function, here slide on the screen with your finger, the camera will rotate follow your finger direction. Section3 Playback/ Snapshot/Audio/Talk buttons Playback Click this icon to play the pictures you have captured. Snapshot Click it to make snapshot. Audio button Click it and you will hear sound captured by the cameras built-in microphone. Make sure the camera supports Audio. Click the icon again and stop Audio. Talk button Click it then talk through your cell phones microphone which will transmit through the cameras speaker. People will hear your talking through the cameras built-in speaker. Make sure the camera supports Talk. Click the icon again and stop talking. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 71 71 wwww.foscam.co ww.foscam.comm How to add cameras to the Phone APP The following steps are required before adding cameras to the APP:

1 Install the IP Camera(s) which wants to be monitored. 2 Login the IP Camera(s) by web browser and set the IP address, port, username & password and make sure the camera can be accessed by browsers. 3 DDNS setting is a plus whenever you want to add the devices by WAN. Click the button cameras in LAN or in WAN. and go to Device List page, this section will show you how to add 1 2 3 72 72 Figure 5.4 Section1 Back button

: Click this icon and back to the surveillance window Section2 Device List Here will list all cameras that added to the software. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited wwww.foscam.co ww.foscam.comm Section3 Add device buttons Add device in LAN

: Click this icon and the APP will search all cameras in LAN automatically. Such as the following screen:

Figure 5.5 Select the camera IP and click OK to add cameras in LAN, then you can see the camera in the Device List. Add device through scanning UID (User Identification) number

: UID Scan. Click this icon and scan the UID no. in the camera body, then the camera can be added to the App. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 73 73 wwww.foscam.co ww.foscam.comm Figure 5.6 Normally each camera has one unique UID and UID is used for PnP function. Now our camera does not support UID number, so here you cannot allow to use UID to add device. Add device in WAN

: Click this icon and you can add cameras in WAN manually. Click this icon and it pops up the following screen, here you can add cameras manually. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 74 74 wwww.foscam.co ww.foscam.comm Figure 5.7 Camera Type: Our Company produces two series cameras: MJ and H.264. Here select the camera type that you want to add. Camera name: The Camera name is a unique name that you can give to your device to help you identify it. IP address: Fill in the cameras DDNS host or WAN IP not LAN IP. Stream type: It has two types: Main stream and Sub stream. For cell phones, we recommend you to select Sub stream to get more fluent video. Http / Media port: For MJ cameras, here share the same port. User name &Password: The cameras user name and password. UID: If your camera supports UID, here you may fill in the UID no.. Now FOSCAM camera does not support UID. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 75 75 Click the icon to add camera then you can see the camera in the Device List. wwww.foscam.co ww.foscam.comm

. Select one IP address and click it, then you can enter the surveillance window. Select one IP address in the Device List and press it for a moment, it pop up the following screen:

Figure 5.8 Edit: Re- edit the cameras information, such as the Http / Media port, user name and password, and so on. Click Edit and you can go to Add camera page (Figure 5.7). Delete device: Delete the camera from the Device List. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 76 76 wwww.foscam.co ww.foscam.comm 5.2 APP for iPhones If you use iPhone, please search the APP Foscam ip cam viewer and install it through APP Store, then you can see the shortcut icon in your cell phone screen. Click the icon and you can go to ipcam table page directly:

1 2 Figure 5.9 The default device list is null, you need to add cameras to it. Section1 Camera list Here will list all cameras that added to the software. Section2 ipcam table/ add ipcam buttons Click this icon and back to ipcam table page, here you can see all cameras that have added to the software. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 77 77 wwww.foscam.co ww.foscam.comm

: Click this icon and back to add ipcam page, here you can add cameras in LAN or in WAN to the software. How to add cameras to the APP The following steps are required before adding cameras to the App:

1) Install the IP Camera(s) which wants to be monitored. 2) Login the IP Camera(s) by web browser and set the IP address, port, username & password and make sure the camera can be accessed by browsers. 3 DDNS setting is a plus whenever you want to add the devices by WAN. If you want to add cameras to the App, please click this icon page(Figure 4.10). go to add ipcam Click this icon and go to add ipcam page Figure 5.10 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 78 78 wwww.foscam.co ww.foscam.comm Add device in LAN Click this button automatically . and the APP will search all cameras in LAN, then add it to APP The cameras in LAN can be searched and added to APP automatically Figure 5.11 There is a icon and web port to login the camera. after the camera name, click it and you can enter the user name, password Figure 5.12 Add device in WAN Step 1: Click the Add Camera icon Step 2: Select the camera type: mjpeg or h.284 (Figure 4.13), then enter the cameras basic information like camera name , ip , http/media port, user name, password and so on(Figure 4.14). to add cameras manually. Figure 5.13 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 79 79 wwww.foscam.co ww.foscam.comm Figure 5.14a Add H.264 Device Page Figure 5.14b Add MJPEG Device Page UID: If your camera supports UID, here you scan UID number. Now FOSCAM camera does not support UID. Device name: The Device name is a unique name that you can give to your device to help you identify it. IP address: Fill in the cameras DDNS host or WAN IP not LAN IP. User &Password: The cameras user name and password. Media / Web port: For MJPEG cameras, here only support web port. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 80 80 wwww.foscam.co ww.foscam.comm Stream type: It has two types: Main stream and Sub stream. For cell phones, we recommend you to select Sub stream to get more fluent video. Step 3: Click Add button cam table page. to add cameras, then you can see the camera name in the ip Figure 5.15 Surveillance windows Back to ipcam table page and you can see all cameras that have added. There is a icon after one camera name, click this icon and you can alter the cameras user name, password, media port and http port. Figure 5.16 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 81 81 Figure 5.17 Click one camera ip and you can see the live video. 1 wwww.foscam.co ww.foscam.comm 2 3 4 Figure 5.18 Please check the login window above, it was divided to 4 sections from no. 1 to 4. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 82 82 wwww.foscam.co ww.foscam.comm Section1 Back Button

: Click this icon and back to ipcam table page. Section2 Photo Button Click this icon and look the photos you have captured. Section3 Live view window If the camera supports PT function, here slide on the screen with your finger, the camera will rotate follow your finger direction. Section4 Snapshot/Audio/Talk buttons Audio Talk Snapshot Snapshot Click it to make snapshot. Audio button Click it and you will hear sound captured by the cameras built-in microphone. Make sure the camera supports Audio. Click the icon again and stop Audio. Talk button Click it then talk through your cell phones microphone which will transmit through the cameras speaker. People will hear your talking through the cameras built-in speaker. Make sure the camera supports Talk. Click the icon again and stop talking. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 83 83 wwww.foscam.co ww.foscam.comm 66 APPENDIX APPENDIX 6.1 Frequently Asked Questions NOTE: Any questions you would meet, please check Network connections firstly. Check the working status revealed by the indicators on the network server, hub, exchange and network card. If abnormal, check the network connections. 6.1.1 How to download and installl the ActiveX for Firefox users For the first time login the camera, it may prompt you to download plugin. Click here to download the plugin Drag the download file to Firefox web page and it will prompt you to Install it. Figure 6.1 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 84 84 wwww.foscam.co ww.foscam.comm Click Install Now Figure 6.2 Reboot the Firefox after the plugin installation is successfully completely, then relogin the camera again, you can see the surveillance window NOTE: If you could not view living video after running the ActiveX, only a red cross center of the video or just a black screen. Please change another port number to try. Make sure all firewall or antivirus software on your computer does not block the active download and installation. If you are unable to run the ActiveX control, try shutting down the firewall or antivirus program. in the 6.1.2 How to download and installl the ActiveX for Google Chrome users For the first time login the camera, it will prompt you to download the ActiveX.. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 85 85 wwww.foscam.co ww.foscam.comm Download the plugin and drag it to the Extensions page of Google Chrome. Figure 6.3

. Click Add button to install the plugin Click Add button to install the Plugins. Figure6.4 Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 86 86 wwww.foscam.co ww.foscam.comm Click Add button to install the plugin Figure 6.5 Reboot the browser and re-login the camera, you will see the surveillance window. 6.1.3 I have forgotten the administrator password To reset the administrator password, you had better unplug the network cable firstly. After that, press and hold down the RESET BUTTON about 5 seconds. Releasing the reset button, the password will turn to the factory default. Default administrator username/password: admin with blank password 6.1.4 Subnet doesnt match Check whether your ipcamera in the same subnet of your computer. The step is Control PanelNetwork ConnectionsDbclick Local Area Connections Choose GeneralProperties.(Figure 4.23/4.24) Check subnet mask, IP address and gateways. When you set IP address please make sure they are in the same subnet. Otherwise you can't access camera. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 87 87 wwww.foscam.co ww.foscam.comm 6.1.5 Camera can not record when I click Record button or I cant change the manually record path When you use Windows7 or Vista, you may be not able to do manually record or change the record path because of the security settings of computer. There are two ways to resolve this problem:

(1) Please add the camera as a trusted site to resolve this issue. The steps are IE browserToolInternet PropertiesSecurityTrusted sitesSitesAdd

(2) Open IE browser, then right click, select Run as administrator 6.1.6 No Pictures Problems The video streaming is transmitted by the ActiveX controller. If ActiveX controller isnt installed correctly you will see no video image. You can resolve this problem by this way:

Download ActiveX controller and set the safety property of IE in the PC when you view it first time: IE browser Tool Internet Proper Security Custom Level ActiveX control and Plug-ins. Three options of front should be set to be Enable, The ActiveX programs read by the computer will be stored. As follows:

Enable: Download unsigned ActiveX controls Enable: Initialize and script ActiveX controls not marked as safe Enable: Run ActiveX controls and plug-ins Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 88 88 If you allow the ActiveX running, but still could not see living video. Please change another port number to try. Dont use port 8000. Figure 6.6 wwww.foscam.co ww.foscam.comm Figure6.7 NOTE: Make sure that your firewall or anti-virus software does not block the camera or ActiveX. If you could not see video, please shut down firewall or anti-virus software to try again. 6.1.7 Cant access IP camera in internet There are some reasons:

1 ActiveX controller is not installed correctly 2 The port which camera used is blocked by Firewall or Anti-virus software. Please change another port number and try again. (Figure6.7) 3 Port forwarding is not successful(Figure4.30) Check these settings and make sure they are correct. 6.1.8 UPnP always failed UPnP only contains port forwarding in our recent software. Sometimes, it may be failed to do port forwarding automatically because of firewall or anti-virus software. It also has much relation with routers security settings. So we recommend you do port forwarding manually. You can view your camera in internet successfully after you do port forwarding manually in your router. 5.1.9 Camera can not connect wireless If your camera could not connect wireless after you set wireless settings and plug out the cable. Please check whether your settings are correct or not. Normally, camera cant connect wireless mainly because of wrong settings. Make sure broadcast your SSID; use the same encryption for router and camera. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 89 89 wwww.foscam.co ww.foscam.comm 6.2 Default Parameters Default network Parameters IP address: obtain dynamically Subnet mask: obtain dynamically Gateway: obtain dynamically DDNS: Embedded FOSCAM DDNS Service Username and password Default admin username: admin with a blank password 6.3Specification Specification Image Sensor Image Sensor Audio Video Video Lens Mini. Illumination Input/Output Image Compression Image Frame Rate Resolution View Image adjust Infrared mode Night visibility Ethernet Network Supported Protocol

, 8mm or choose Input/Output, which can realize two-way FI9805W High Definition Color CMOS Sensor f 4mm or 6mm or F=1.2 0.5Lux Linear voice the intercom H.264 25fps(50Hz), 30fps(60Hz),Down adjustable 720p1280*720VGA640*480 H.264 dual streaming The brightness, contrast, saturation, chromaticity, is adjustable Off & Manually 8mm 36 IR LEDs, Night visibility up to 30 meters One 10/100Mbps RJ-45 TCP/IPUDP/IPHTTPSMTPFTPDHCP RTSP HTTPS DDNSUPNP Wireless Standard Support IP address WIFI(IEEE802.11b/g/n) static IP address, dynamic IP address Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 90 90 wwww.foscam.co ww.foscam.comm Alarm Hardware Interface Alarm detection Alarm inform POWER Interface Input/Output Audio Interface Reset Buttons The motion detecting Support EmailFTP etc alarm inform way DC 12V/2.0A (EU,US,AU adapter or other types option, Power Consumption 8 Watts One audio input jack, One audio output jack. One Reset Environment PC Operate Temper Operate Humidity Storage Temper Storage Humidity Dimension Net Weight Gross Weight CPU Memory Size Display Card Requirements Supported OS Software Certification Browser Upgrade CE,FCC 0 ~ 55C (32F ~ 131F) 10% ~ 80% non-condensing

-10C ~ 60 (14F ~ 140F) 0% ~ 90% non-condensing 180X98x103mm 1300g 1546g 2.0GHZ or above (suggested 3.0GHz) 256MB or above (suggested 1.0GHz) 64M or above Microsoft

Windows7-32bit/Windows7- 64bit/Windows8- 32 bit/

Windows8-64bit/ mac IE6 and above version or compatible browser, Firefox, Chrome, Safari or other standard browsers Upgrade from network Windows 2000/XP

/Vista Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 91 91 wwww.foscam.co ww.foscam.comm 6.4 CE & FCC Electromagnetic Compatibility (EMC) FCC Statement This device compiles with FCC Rules Part 15. Operation is subject conditions. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause to the following two undesired operation. to Part 15 of This equipment has been tested and found to comply with the limits for a Class B pursuant the FCC Rules. These limits are designed to provide reasonable protection against harmful is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the installation manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is like to cause harmful interference, in which case the user will be required to correct the interference at his own expense. interference when the equipment digital device, FCC Caution Any changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled This equipment should be installed and operated with minimum distance 20cm between radiator& your body. environment . the This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. CE Mark Warning This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 92 92 wwww.foscam.co ww.foscam.comm 6.5 WARRANTY ShenZhen FOSCAM Intelligent Technology Limited.("FOSCAM") values your business and always attempts to provide you the very best of service. No limited hardware warranty is provided by FOSCAM unless your FOSCAM product ("product") was purchased from an authorized distributor or authorized reseller. Distributors may sell products to resellers who then sell products to end users. No warranty service is provided unless the product is returned to an authorized return center in the region where the product was first shipped by FOSCAM or to the point-of-purchase, which may have regional specific warranty implications. If you purchase your FOSCAM product from online store, please contact the point-of-purchase and ask for return/replacement/repair service. Hardware Warranty Information x FOSCAM provide 2-year limited warranty for naked product and 6-month limited warranty for accessories. Limited Hardware Warranty x FOSCAM products are warranted to be free from manufacturing defects in materials and workmanship starting from the shipping date of FOSCAM. This limited hardware warranty does not cover:

x Software, including the software added to the products through our factory-integration system, software that included in the CD,etc. x Usage that is not in accordance with product instructions. x Failure to follow the product instructions. x Abuse firmware upgrade without the authorized technicians guidance. x Normal wear and tear. Return Procedures x Please read FOSCAM warranty policy & policy of your reseller first before sending items back to point-of-purchase. x Customer must first contact point-of-purchase to obtain a Return Merchandise Authorization (RMA) number before returning the product. If the product you received is suspected to be defective and the product warranty has not expired, The RMA number will allow your reseller to track your return much easier and help them expedite processing your request. x After receiving your RMA case number, pack the item(s) very well with the original box and all the original accessories included such as power adapters, brackets, cables, manuals, and driver CD disks. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 93 93 wwww.foscam.co ww.foscam.comm x Write your RMA number and the return reason (the problem of the product) on the warranty card along with the complete package to send them back. Replacement Services x If customers ask for replacement service, please contact point-of-purchase and follow their policy. x Our technicians will inspect all items returned for replacement requests. If the retuned product is found in working order, we will return the same item received. However customers shall be responsible for all shipping & handling charges incurred for getting the units back to customers. If returned products are found defective, we will replace the product and assume the shipping cost for sending back the replacement unit to customers. If for any reason, we are unable to provide a replacement of the original returned item(s). You will have a choice for a Substitute item at the same equal value. x x x We do not provide exchange and replacement due to normal hardware upgrade according the market after 14 days after the product is delivered. x Our technicians will test the product before send out the replacement, any other demand for more than two times replacement for the same product during replacement limit will be rejected. x Replaced products are warranted from the balance of the former warranty period. Warranty Forfeiture x Warranty is void if purchase from unauthorized distributor or reseller. x Warranty is void if trade-mark, serial tags, product stickers have been removed, altered or tampered with. x Warranty is void for mishandling, improper use, or defacing the product. x Abuse firmware upgrade without the authorized technicians guidance. x Warranty is void for physical damage, altered, either internally or externally, improper or inadequate packaging when returned for RMA purposes. x Warranty is void if damage has resulted from accident, dismantle, abuse, or service or modification by someone other than the appointed vendor, souse, fission or the spare part has been over the period of warranty. x Warranty is void if product is damaged due to improper working environment or operation.

(For example, improper temperature, humidity, unusual physical or electrical stress or interference, failure or fluctuation of electrical power, static electricity, using wrong power adapter, etc.) x Warranty is void if damaged by the use of parts not manufactured or sold by FOSCAM. x Damage caused by improper installation of third-party products. x Warranty is void if damaged for irresistible cause, such as earthquake, fire, lightning, flood, etc. x Product beyond limited warranty. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 94 94 Shipping Fee wwww.foscam.co ww.foscam.comm x If products are defective or damaged under normal use or operation in the replacement limit, distributors or resellers are responsible for the shipping cost the product back to customers, customers should assume the shipping cost send the product to the point-of-purchase. x During replacement limit, if customers ask for replacement due to the product does not fit for customers personal expectation, customers should responsible for both shipping fee. x Customers shall be responsible for both shipping fee if their product beyond the replacement limit but still in warranty limit. Repair Service Out Of Warranty x FOSCAM provide extra repair service for product that out of warranty, it is chargeable. The total fee contains device cost and service fee. Device cost (including accessories) is the standard uniform price provide by FOSCAM. x Different region may have different service fee, please contact the point-of-purchase to confirm that before you ask for this service. x Our technicians will quote the total price after detect the product, If customers refused to repair after the quotation, customers need pay for the test fee, $3.5/hour. If agree with the quotation, test will be free. x Repaired product out of warranty will obtains 3-month warranty from the date of the product back to customers. Limitation of Liability x FOSCAM is not responsible for other extra warranty or commitment promised by resellers, if your reseller promised some extra commitment or warranty; please ask for written documents to protect your rights and interests. x FOSCAM does not offer refunds under any circumstances. Please contact the point-of-purchase and follow their refund/return policy. x FOSCAM shall not be liable under any circumstances for any consequential, incidental, special or exemplary damages arising out of or in any connection with this agreement or the products, including but not limited to lost profits, or any claim based on indemnity or contribution, or the failure of any limited or exclusive remedy to achieve its essential purpose or otherwise. Purchaser's exclusive remedy, as against FOSCAM, shall be the repair or replacement of defective parts. If FOSCAM lists a product on its website specification in error or that is no longer available for any reason, FOSCAM reserves the right to explain it without incurring any liability. All rights reserved. FOSCAM and the FOSCAM logo are trademarks of ShenZhen FOSCAM Intelligent Technology Limited., registered in the U.S. and other countries. Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 95 95 wwww.foscam.co ww.foscam.comm 7 OBTAINING TECHNICAL SUPPORT While we hope your experience with the IPCAM network camera is enjoyable and easy to use, you may experience some issues or have questions that this Users Guide has not answered. If you have problem with FOSCAM IP camera, please first contact FOSCAM reseller for solving the problems. If our reseller cannot provide service, please contact our service department: tech@foscam.com . Shenzhen Foscam Shenzhen Tel:Tel: 8686 755755 2674 Foscam Intelligent 2674 5668 5668 Fax:Fax: 8686 755755 2674 2674 5168 5168 Intelligent Technology Technology Co.,Co., Limited Limited 96 96