FCC ID: ZDEV5P QHD WiFi IP Camera

Quick Setup Guide 1 Getting Started Package Contents Setting Up Your Foscam Security Camera IP Camera Network Cable Waterproof Lid 2 Physical Description Antenna Microphone Spotlight &

Infrared LED Lens Spotlight &

Infrared LED 3 Setting Up Your Camera:

Connection via the Foscam App (Recommended) Before You Get Started Scan the QR code below to download and install the Foscam APP. 2. Plug the power adapter into the camera, and please wait for a few seconds until hearing the Ready for WiFi configuration 5. Follow the steps below:

Wi-Fi Antenna Expansion Screws Power Adapter Micro SD Card Slot Reset Drill Hole Position Template Screw holes for installing camera Quick Setup Guide Outdoor FHD Security Camera Mounting Template Quick Setup Guide Security Tips Please change the camera's password regularly, using a combination of numbers, letters and special characters. We recommend that you regularly update your camera with the latest available software and firmware to ensure the best experience with your camera. To view this guide in other languages (e.g. Nederlands, Deutsch, Franais, Espaol), and for detailed manuals, tools, etc., please visit foscam.com/downloads. V1.0 305503000880 Light Sensor Speaker LAN Power To ensure a smoother video experience on your smart phone, it is recommended that your smart phone meet the following specifications:

Settings WLAN WLAN MY NETWORKS xxxxx_2.4G xxxxx_5G 2.4 GHz Wi-Fi or 5 GHz Wi-Fi WiFi 3. Make sure that your smart phone is connected to your WiFi router. iOS: version 11 or higher. Android: 5.0 or higher, using a device with a Graphics Processing Unit (GPU). Note: For the best experience, please update the APP to the latest version!

WiFi Connection 1. Please tighten the antenna clockwise and make sure it is in a vertical position. 4. Open the foscam APP and please register a Foscam account, or sign in if you have one already. Email address Password Forgot Password Accept Privacy Notices and Terms of Seervice Sign In Sign Up The cords on this product are a potential strangulation hazard. For child safety, please keep these cords out of the reach of children. Tighten clockwise 1 My Device Tap to add a device 2

Add Device Scan the QR code Scan the QR code Scan the QR code Search in LAN Manually add 3 Scan QR Code Model: XXX FHD Wireless IP Camera FCC ID:XXXXX IC:12558A-XX S/N:FIAI1403000001 UID:XXXXXXXXXXX Please scan the QR code located on your device Scan QR Code Model: XXX FHD Wireless IP Camera FCC ID:XXXXX IC:12558A-XX S/N:FIAI1403000001 UID:XXXXXXXXXXX Please scan the QR code located on your device M o d e l : X X X F H D W i r e l e s s I P C a m e r a F C C I D : X X X X X I C : 1 2 5 5 8 A - X X S / N : F I A I 1 4 0 3 0 0 0 0 0 1 U I D : X X X X X X X X X X X 4 Add Device Power the device on until the device voice prompts

"Hello foscam"

5 Wi-Fi configuration Keep the device and mobile phone close tothe router. 6 Add Camera

For Wi-Fi configuration, please pion the QR code to the device dirctly. 11 My Device 12 I have heardHello Foscam"

Next XXXXX_5G WiFi Password Confirm 15CM The best distance is:

6~12inches (15~30cm Configure WiFi connecton Foscam_camera 13 Garden Foscam_camera Camera Login New camera username New camera password Re-enter new camera password Submit 7 90 15~30cm 5.9~11.8in Tips: Please place the QR code on the phone screen about 15 to 30cm (5.9 to 11.8in) away, and if you encounter difficulties you can try to move the screen slowly around 15 30cm (5.9 - 11.8in). 8 WiFi connection

For WiFi configuration, please point the QR code to the camera directly. 9

10 Add Camera Set name Set name Device Landing.. Device Landing.. 20%

Please do not exit this app or turn off the device during this process(requires approximately 2 minutes to complete) Device added successfully Device added successfully Please set the device name:

Garden Living Room Doorway Corridor Garage Balcony Bed Room Kitchen Garden Save the body QR code Save the devices QR code to the mobile system album to help you re-add the device more conveniently Save I have heard the voice prompt WiFi connecting Next Note: If the adding process fails, please reset your camera and try adding again according to the above method. Reset 4 PC Access Your Camera Foscam VMS Foscam VMS is a new tool for PCs. It does not require plug-ins and is compatible with Windows & Mac, supporting all Foscam HD cameras and up to 36 cameras at the same time. If you would like to manage multiple cameras, we suggest you install Foscam VMS. You can download the Foscam VMS Windows version from foscam.com/vms, and can download the "Foscam VMS"

Mac version from the APP store:

https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12 Note: For the best experience, please update Foscam VMS to the latest version!

Add the IP Camera 1. Run Foscam VMS, then create a local administrator account and login. 2. Tap the "+" icon on the Foscam VMS and follow the setup wizard to add your camera. Please visit foscam.com/downloads to view the user manual and for additional detailed steps. 5 Hardware Installation 6 Important Notice Camera Username & Password 0~90 0~360 0~360 0~360 0~90 0~360 The camera username & password are used to access and manage your camera. Having a strong password can significantly improve the security of your camera. If you have forgotten either of them, please press the "Reset"

button. How to format Micro SD card, please follow the steps below:

8 9 Safety Tips 1 2 3 Foscam Format Format ready Computer OK Prohibit use at high temperature Prohibit use at low temperature Keep away from fire 10 11 Point the camera at the desired location and use the screws provided to mount it. Please Note:

. 264

. 264 Ensure that rain or water will not reach the connector ports at the end of the tailcable. These connectors are not weather-resistant. Reset Press the "Reset"

button and hold it for more than 3~5 seconds 4 Scan the QR code below to download the FoscamFormat Tool

. 264

. 264 5 Open the FoscamFormat Tool FoscamFormat Storage Media Your camera supports cloud, NVR (Network Video Recorder), and Micro SD card (supports FAT32 and exFAT format) storage formats. foscam.com/downloads/app_software.html 6 Foscam Format 7 Warning cloud Storage NVR Micro SD card

(FAT32 & exFAT) ALL data on disk: I: will be erased, are you sure?

Confirm Cancel Choose the SD card:

F:\

1 Accept Terms of use 2 Terms of use Format 2019 (c) Euport BV 3 3 Keep away from children Not a children's toy Use the supplied screw pack Keep dry Caution Electricity Use the correct power supply 7 Product Performance WLAN frequency range: 2412MHz - 2472MHz and 5725MHz - 5850MHz Maximum transmission power: < 18dBm Wireless Standard: IEEE802.11b/g/n (2.4GHz) IEEE802.11a/n/ac (5GHz) Power Supply: DC 12V 1.0A 12W 8 Troubleshooting IP cameras is not powering on If you find your camera is not powering on, please the following:

1. Please check whether the outlet is working properly or not. Try to plug the camera into a different outlet and see whether it will work. 2. Please check whether the DC adapter is working or not. If you have another 12V/1A power adapter which is working, please try with another power adapter and see whether it will work. 3. If it still wont work, please contact Foscam support. How to re-configure the WiFi connection for Foscam cameras after router changed?

1. Please connect the camera to your router with an ethernet cable. If you can see the camera live video on the Foscam app, please go to camera settings-->WiFi settings to choose the new WiFi name and input WiFi password to set up. After the WiFi settings is completed, please disconnect the ethernet cable from the camera and wait for some seconds to connect to the camera. 2. There is a need to reset the camera first. Please refer to https://www.foscam.com/faqs/view.html?id=13 to see the reset steps. Then please open the Foscam app to scan the QR-code of your camera to set up the wireless connection for the camera. Please make sure your cellphone is connected to that new WiFi. support@foscam.com Corridor CE Certificate statement Website:

https://www.foscam.com/company/ce-certificate.html Exporter and Importer Information Opened to Public:

https://www.foscam.com/company/open-information.html FAQS Foscam APP Facebook Manufacturer: Shenzhen Foscam Intelligent Technology Co., Ltd Addr: Room 901-902,Building 1B, Shenzhen International Innovation Valley, Xingke 1st Street, Nanshan District, Shenzhen, Guangdong, China, 518055 www.foscam.com Due to product upgrades and other reasons, this guide may be slow to update, resulting in slight inconsistencies with the official website information. Please take the official website

(www.foscam.com) information as the current standard. FCC Warning 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement:

1.This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2.This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

ShenZhen Foscam Intelligent Technology Co., Ltd. Section 2.911(d)(5)(i) Certification Equipment Type Company name: ShenZhen Foscam Intelligent Technology Co., Ltd. Address: Room 901, Unit B, Building 7, Xingke 1st Street, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, Guangdong, China Product Name: QHD WiFi IP Camera FCC ID: ZDEV5P Model(s): V5P, V5S, V9905P, V9915P 2.911(d)(5)(i) Equipment Type We, [ShenZhen Foscam Intelligent Technology Co., Ltd. ] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name:

David Tu Date: 2023-08-21 Title and Company name: Quality Department NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

ShenZhen Foscam Intelligent Technology Co., Ltd. Section 2.911(d)(5)(ii) Certification Applicant (Covered List ) Company name: ShenZhen Foscam Intelligent Technology Co., Ltd. Address: Room 901, Unit B, Building 7, Xingke 1st Street, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, Guangdong, China Product Name: QHD WiFi IP Camera FCC ID: ZDEV5P Model(s): V5P, V5S, V9905P, V9915P 2.911(d)(5)(ii) Applicant filing We, [ShenZhen Foscam Intelligent Technology Co., Ltd. ] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: David Tu Date: 2023-08-21 Title and Company name: Quality Department NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

ShenZhen Foscam Intelligent Technology Co., Ltd. Section 2.911(d)(7) USA Agent for Service of Process Company name: ShenZhen Foscam Intelligent Technology Co., Ltd. Address: Room 901, Unit B, Building 7, Xingke 1st Street, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, Guangdong, China Product Name: QHD WiFi IP Camera FCC ID: ZDEV5P Model(s): V5P, V5S, V9905P, V9915P 2.911(d)(7) USA Designated Agent for Service of Process We, [ShenZhen Foscam Intelligent Technology Co., Ltd. ] (the applicant) designate [THREE STONES MEDIA LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: THREE STONES MEDIA LLC Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 FRN: 0033401761 Contact Name: Sijie Zhang Telephone No: +1 267 909 3692 Email: abbyzhangmedia@gmail.com Applicant Company name: ShenZhen Foscam Intelligent Technology Co., Ltd. Address: Room 901, Unit B, Building 7, Xingke 1st Street, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, Guangdong, China FCC Grantee Code: ZDE Contact Name: David Tu Telephone No: +86-18319051285 Email: dqe@foscam.com Signature:

Title: Manager Date: 2023-08-21 Signature:

Title: Quality Department Date: 2023-08-21 2.911 (d)(7)USA Agent v1.2 ShenZhen Foscam Intelligent Technology Co., Ltd. NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-t o-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2

Differences Declaration To whom concern, We company ShenZhen Foscam Intelligent Technology Co., Ltd. Here by declares:

The product model(s) V5S, V9905P, V9915P are identical in the PCB layout, electronic schematic and antenna with V5P, only different in model names for different sales regions. Sincerely yours, Name (in print): David Tu Company name: ShenZhen Foscam Intelligent Technology Co., Ltd. Company address: Room 901, Unit B, Building 7, Xingke 1st Street, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, Guangdong, China Tel: +86-18319051285

ShenZhen Foscam Intelligent Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject; Request for Long Term Confidentiality FCC ID: ZDEV5P Date: 2023-08-21 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description software security requirement It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: David Tu Title: Quality Manager

ShenZhen Foscam Intelligent Technology Co., Ltd. FCC Software Configuration Control Declaration Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: QHD WiFi IP Camera / V5P, V5S, V9905P, V9915P Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: David Tu Date: 2023-08-21 Title: Quality Department Signature of applicant FCC Software Configuration Control Declaration Rev1.1(5G).docx