all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
user manual | Users Manual | 4.81 MiB | May 08 2020 | |||
1 2 |
|
Internal Photos | Internal Photos | 853.97 KiB | May 08 2020 | |||
1 2 |
|
Ext Photos | External Photos | 535.71 KiB | May 08 2020 | |||
1 2 |
|
Label and Label Location | ID Label/Location Info | 91.69 KiB | May 08 2020 | |||
1 2 |
|
Agent Authorization | Cover Letter(s) | 18.56 KiB | May 08 2020 | |||
1 2 |
|
Appendix A for 2.4G WIFI Test Data | Test Report | 3.62 MiB | May 08 2020 | |||
1 2 | Block Diagram | Block Diagram | May 08 2020 | confidential | ||||
1 2 |
|
Declaration Letter of Model Difference | Cover Letter(s) | 82.64 KiB | May 08 2020 | |||
1 2 |
|
FCC Short & Long Term Confidentiality Request | Cover Letter(s) | 77.32 KiB | May 08 2020 | |||
1 2 |
|
LCS200225105AEA 2.4G WLAN FCC | Test Report | 1.58 MiB | May 08 2020 | |||
1 2 | Operation Description | Operational Description | May 08 2020 | confidential | ||||
1 2 |
|
RF Exposure Evaluation | RF Exposure Info | 453.12 KiB | May 08 2020 | |||
1 2 | Schematic | Schematics | May 08 2020 | confidential | ||||
1 2 |
|
Test Setup Photos | Test Setup Photos | 276.20 KiB | May 08 2020 | |||
1 2 |
|
WIFI Channel 12 and 13 Declaration Letter | Cover Letter(s) | 289.08 KiB | May 08 2020 | |||
1 2 |
|
Appendix B for 5.2G WLAN Test Data | Test Report | 2.91 MiB | May 08 2020 | |||
1 2 |
|
Appendix C for 5.8G WLAN Test Data | Test Report | 3.01 MiB | May 08 2020 | |||
1 2 |
|
FCC Software Configuration Control Declaration Rev1.1 | Cover Letter(s) | 71.83 KiB | May 08 2020 | |||
1 2 |
|
LCS200225105AEB 5.2G WLAN FCC | Test Report | 1.54 MiB | May 08 2020 | |||
1 2 |
|
LCS200225105AEC 5.8G WLAN FCC | Test Report | 1.60 MiB | May 08 2020 | |||
1 2 | Operation Description | Operational Description | May 08 2020 | confidential | ||||
1 2 | SCH | Schematics | May 08 2020 | confidential | ||||
1 2 | Software Security Requirements For U-NII Devices | SDR Software/Security Inf | May 08 2020 | confidential | ||||
1 2 | block diagram | Block Diagram | May 08 2020 | confidential |
1 2 | user manual | Users Manual | 4.81 MiB | May 08 2020 |
UUsseerr MMaannuuaall Outdoor IP Security Camera Model: D4Z V1.0 Table of Contents Security Warning .................................................................................................................................................. 1 1 Overview ........................................................................................................................................................... 2 1.1 Key Features ........................................................................................................................................... 2 1.2 Read before Use ..................................................................................................................................... 3 1.3 Packing Contents .................................................................................................................................... 3 1.4 Physical Description................................................................................................................................ 3 1.5 SD Card Management ............................................................................................................................ 4 1.6 Wall Installation ....................................................................................................................................... 4 2 Access the IP Camera in Foscam App .............................................................................................................. 6 2.1 Setting Up Your Camera:Wired Connection via Foscam App ................................................................ 6 2.2 Foscam APP Surveillance Window ........................................................................................................ 7 2. 3 Watch Live ............................................................................................................................................. 8 3 Access the Camera in the Web ......................................................................................................................... 9 3.1 Hardware Connection & Software Installation ........................................................................................ 9 3.2 Access the Camera in LAN ................................................................................................................... 10 3.3 Access the Camera in WAN.................................................................................................................. 11 3.4 Using the VLC Player ........................................................................................................................... 12 3.5 IP Camera Connection to the Server .................................................................................................... 14 3.6 Surveillance Software GUI .................................................................................................................... 14 3.7 Advanced Camera Settings .................................................................................................................. 23 3.8 Playback ................................................................................................................................................ 56 4 Surveillance Software Foscam VMS ............................................................................................................... 59 4.1 Hardware Connection & Software Installation ...................................................................................... 59 4.2 Software Installation .............................................................................................................................. 59 4.3 Create Acount ....................................................................................................................................... 60 4.4 Add Device ............................................................................................................................................ 61 4.5 Surveillance Software GUI .................................................................................................................... 64 4.6 Advanced Camera Settings .................................................................................................................. 70 5 Appendix ........................................................................................................................................................ 104 5.1 Frequently Asked Questions ............................................................................................................... 104 5.2 Default Parameters ............................................................................................................................. 110 5.3 Specification ........................................................................................................................................ 110 5.4 CE & FCC ............................................................................................................................................ 111 5.5 WARRANTY ........................................................................................................................................ 112 5.6 Statement ............................................................................................................................................ 114 6 Obtaining Technical Support ......................................................................................................................... 116 Security Warning Please change the password of your camera regularly, using a combination of numbers, letters and special characters. We recommend that you regularly update your camera to the latest available software and firmware versions to help ensure the best experience for your camera. 1 1 Overview Foscam Outdoor IP Security Camera is an integrated IP Camera with a color CMOS sensor enabling viewing in High Definition resolution.It combines a high quality digital video camera, with a powerful web server, to bring clear video to your desktop from anywhere on your local network or over the Internet. The IP Camera supports the industry-standard H.264 compression technology, drastically reducing file sizes and conserving valuable network bandwidth. The IP Camera is based on the TCP / IP standard. There is a WEB server inside which could support Internet Explorer. Therefore the management and maintenance of your device is simplified by using the network to achieve the remote configuration and start-up. The camera is designed for outdoor surveillance applications such as courtyards, supermarket, and school. Controlling the IP camera and managing images are simplified by using the provided web interface across the network utilizing connectivity. 1.1 Key Features Standard H.264 video compression algorithm to satisfy the transmission of high definition video in narrow bandwidth network 4.0 Mega-Pixel Supports IE / Firefox / Google / Safari browser or any other standard browsers Supports WPA and WPA2 Encryption Supports 4x optical zoom 4pcs IR-LEDs, night vision range up to 20 metres (66ft) Supports image snapshot Supports dual-stream Supports 2.4G/5G dual band, IEEE802.11b/g/n/ac Supports IR-Cut and the filter change automatically Supports remote viewing & record from anywhere anytime Multi-level users management with password protection Motion detection alert via email or upload image to FTP Supports multiple network protocols: IPTCPUDPHTTPHTTPSSMTPFTPDHCPRTSP ONVIF Providing Video Management Software to manage or monitor multi-cameras Supports Wide Dynamic Range Supports sound detection Supports IP Filtering Supports Alexa Supports Google Assistant 1.2 Read before Use Please first verify that all contents received are complete according to the Package Contents listed below. Before the Network Camera is installed, please carefully read and follow the instructions in the Quick Setup Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly as intended. 1.3 Packing Contents IP Camera 1 Quick Setup Guide 1 Mounting Plate 1 1.4 Physical Description Power Adapter 1 Ethernet Cable 1 Wi-Fi Antenna 1 1 2 3 4 1 LAN 10/100M adaptive Ethernet interface. Through this interface, IP camera can be connected with various network devices, such as hub, router, etc. 2 Audio Output The jack is used to plug external output device such as loud speaker directly. Here microphone cannot directly insert to the interface, it must connect to adapter first. 3 Power Interface Connect the external power adapter, request for 12V / 2A power. 3 4 Reset Button Press and hold on the reset button for 5 seconds. Releasing the reset button, the password will back to the factory default administrator password. The default administrator user is admin with no password. NOTE: There are up to two labels located at the bottom of the camera, this is an important feature of original Foscam cameras. If your camera does not have labels, it may be a clone. Cloned Foscam cameras can not use original firmware and are not eligible for warranty or technical services. 1.5 SD Card Management The record files of the IPC can be stored in the Micro SD Card. You need open the IP Camera, then plug Micro the SD card into SD card slot inside the IP Camera. When you plug in the Micro SD card during the camera work process, please reboot the camera again, or else the Micro SD Card may be cannot work well. Insert Micro SD Card in the location shown below. NOTE: When you re-install the camera, please ensure the tightness with the camera. 1.6 Wall Installation Please refer to the Quick Setup Guide. NOTE: Ensure that the rain or water will not reach the connector ports at the end of the pig tail wiring. These connectors are not weather-resistant. The cable of an outdoor camera should, from the position where the cable is divided into several cables, be fitted dry. Install the cable into a waterproof junction box (1) or bring the cable indoors (2). 4 5 2 Access the IP Camera in Foscam App 2.1 Setting Up Your Camera:Wired Connection via Foscam App Download and open the Foscam App from the App Store or Google Play Store. Once open, please register for a Foscam account, or sign in if you have one already. 1. Please mount the antenna and make sure it is in a vertical upright position. 2. Connect the camera to your Internet router using an Ethernet cable. 3. Connect the power adapter to the camera. 4. Run the Foscam APP. 5. Under Foscam select Tap to add a camera and then select "Camera", after that scan the QR code, which is located at the bottom of your camera (see illustrations below). 6. On the Choose Setup Method screen, confrm that Wired is selected (upper-left corner) and tap Ready for Wired Connection. Wait a few moments for a message confrming that the setup process has been completed (see illustrations below). 6 2.2 Foscam APP Surveillance Window Please refer to the section 2.1.1 if you install the camera for the first time. You can start to learn about software operation after finish quick installation.When you launch the Foscam App, the devices page displays. Menu Camera Name Camera Date&Time Add Device Cloud Service Alerts Album Watch Live Camera Name: A camera name which is displayed in the Foscam Cloud Service. 7 You can rename your cameras name by tap Live
> Camera Settings
> Camera Info
. OSD: Including camera name and camera time, camera name can not be renamed but camera time can be in synchronized with the phone. Sync Time: Tap Live
> Camera Settings
> Sync Time
. 2. 3 Watch Live Tap Live to view and listen to a live video Back Resolution Speaker / Mute the audio Pan / Tilt control Snapshot Two-way audio Date Camera Setting IR LED Schedule Flip Mirro Bit Rate Full screen More Function Cloud Service Subscription Timeline Back: To stop viewing and listening to the live feed, tap the Back Resolution: There are three types to identify different streams you have set. If select the FHD Mode, the clearer video will become, and it will take up more bandwidth; If select the SD Mode, the video will not be as cleaar as FHD Mode, and it will take up less bandwidth. The HD Model is a value between FHD Mode and SD Mode. Bit Rate: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and 8 bit rate is large, that will lead to video can not play well. On this screen, you can listen to a live stream, record clips, take a snapshot, activate two-way talk or full screen. If you want to catch the smaller details, pinch and drag any image as you do with photos on your smartphone IR LED Schedule: On this page, you can enable/disable the IR LED, and set the IR auto switch or you can schedule it. Auot: As default, the IR-Cut auto switch is ON, it means that the IR LED will be OFF during 9:00~18:00, and the IR LED will be ON at the other time. Day: it means that the IR LED will be OFF all the time. Night: it means that the IR LED will be ON all the time. Schedule: You can schedule the time to turn the IR LED OFF/ON. 3 Access the Camera in the Web 3.1 Hardware Connection & Software Installation 1. Connect the camera to the LAN network (Router or Switch) via network cable. 2. Please connect the power adapter to the camera. 3. Visit Foscam official website http://www.foscam.com , select Support > Download Center > Software Tools, then you can find the Equipment Search Tool, download the tool to your computer, the icon shows as below:
NOTES:
If your computer (Windows OS) supports autorun function, you can find the corresponding file in the opened control panel. 9 3.2 Access the Camera in LAN The camera supports HTTP and HTTPS protocols, you can access the camera in two ways.
(1) Http:// LAN IP + Http Port No. The default HTTP port NO. is 88. Double click the Search Tool icon to run, and it should find the camera's IP address automatically after you plug in the network cable. Double click the IP address of the camera; the camera login page should be open in your default browser.
(2) Https:// LAN IP + Https Port no. The default HTTPS port NO. is 443. You can use the URL to access the camera: https:// LAN IP +
HTTPS port NO. Go to Settings > Network > Port panel, you can see and change the HTTP and HTTPS port NO. NOTE: When logging in for the first time, you will need to download and install the add-on. 10 Click Run 3.3 Access the Camera in WAN Static IP Addresses Users with static IP addresses after you have finished connecting the camera using the LAN IP address and port forwarding, you can access the camera directly from Internet using the WAN IP address and port number How to Obtain the WAN IP address from a public website ?
To obtain your WAN IP address, enter the following URL in your browser:
http://www.whatismyip.com.The web page at this address will show you the current WAN IP. Access your IP Camera from the Internet 11 You can access the IP Camera from the Internet (remote access). Enter the WAN IP address and port number in your standard browser. For example, you would enter http:// 183.37.28.254:88 3.4 Using the VLC Player This camera supports RTSP streaming, here you can view the camera using VLC player. RTSP URL rtsp:// [user name][:password]@IP:port number/videosream The part in the square brackets may be omitted. user name & password:
The user name and password to access the camera. This part can be omitted. IP: WAN or LAN IP address. port number: If there is the RSTP port number on the Port page, you must only use RTSP port number. otherwise, you must only use http port number. Videostream: Here support two modes: videoMain and videoSub. When the network speed is bad, here you had better select videoSub. For example:
IP: 192.168.1.11 Port number: 88 User name: admin Password: 123 Here I can enter one of the following URLs in the VLC. 1rtsp://admin:123@192.168.1.11:88/videoMain 2rtsp:// @192.168.1.11:88/videoMain 3rtsp://:123@192.168.1.11:88/videoMain 4rtsp://admin@192.168.1.11:88/videoMain Open the VLC, and go to Media Open Network Stream option, then enter the URL into VLC. 12 Sometimes you may need to enter the user name and password again. Click OK and you can see the 13 real-time preview. NOTE: If you modify the camera's username or password, you had better reboot the camera, or else the new username and password cannot take effect when you enter the authentication in the VLC. 3.5 IP Camera Connection to the Server Device supports ONVIF 2.2.1 protocol,You can easily access the NVR with ONVIF or server with ONVIF. 3.6 Surveillance Software GUI Please refer to the 3.1 Hardware Connection & Software Installation if you install the camera for the first time. You can start to learn about software operation after finish quick installation. 14 3.6.1 Login Window Section1 Enter the Username and password The default administrator username is admin with no password, please change the password at first using and prevent unauthorized users login the camera. Section2 Stream The camera supports two stream modes: Main stream and sub stream. If you want to access the camera form LAN, here you can select Main stream. If you want to access the camera from Internet, here we recommend sub stream. NOTE: When the network bandwidth is bad you'd better select Sub Stream and the video will be more fluent. Section3 Select the language You can select the language you need by clicking on the language dropdown list. Section4 login the camera Click Login button. NOTE: When setting up your camera for the first time, it will request that you modify the default username / password if both are still set to default. Input the new username and password, click Modify to complete the modification. You will now use the new username and password to login the camera in the future. 15 After logging in for the first time, you will go to Setup Wizard automatically. Here you can set the basic parameters of camera, such as camera name, camera time, IP configuration. Country: Select the country. Device Name: You could give name for your camera. System Time: Select the time zone you need to set the date, time,format, etc. IP: Set IP address of the camera. You could choose to obtain an IP automatically or set the IP address according to your needs. 16 Click Finish to finish setting. 3.6.2 Surveillance Window 6 1 2 3 4 5 7 Section 1 Live Video / Settings Buttons / Playback
: Path to surveillance window. Click this button and back to the surveillance window
: Path to Administrator Control Panel. Click it, and it will lead to Administrator Control Panel and do advanced settings.
: Path to playback window, click it to search / playback the records. Section 2 Multi-Device Window 17 The firmware inside the camera supports up to maximum of 9 cameras being monitoring at the same time. You can add other cameras in multi-camera panel. Section 3 Mode / Stream / WDR / NAA / Mirror / Flip Buttons / Zoom in / out Mode 1) 50Hz ---------Indoor surveillance (Region: Europe, China) 2) 60Hz ---------Indoor surveillance (Region: USA, Canada) 3) Outdoor Mode------Outdoor surveillance Stream The default stream supports multiple modes, For example: HD Mode / 1080P / 25fps / 4M meanings:
Stream type / Resolution / Maximum frame rate / Bit rate. (Different models support different specific mode. ) 1) Stream type no. Identify the stream type. 2) Resolution The bigger the resolution, the better of the image quality is. If you are accessing the camera via internet and want to get more fluent video streaming, please select resolution VGA. 3) Maximum frame rate The maximum frame rate is 30 fps. You should lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve fluently video. The maximum frame rate for each model is different. 4) Bit Rate Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is large, that will lead to video cannot play well. You can reset the stream type on Settings > Video > Video Settings panel. WDR: WDR stands for High Dynamic Range. It usually refers to the method of capturing images having
"greater dynamic range between the lightest and darkest areas of an image than current standard digital 18 imaging methods or photographic methods". You can select On from the dropdown list under sunlight or with bright background. NAA: NAA (Network Auto-Adaptability) can make IP Camera changing the real-time rate to adapt different network conditions, which can supply better preview experience. It is OFF as default. Zoom In or Zoom Out Device Support 4x zoom feature, click or
,The focal length of the camera lens will be larger or shrink, you can adjust the focus distance to the target object size, access to high-definition screen. Zoom Control Zoom in the cameras lens. Zoom out the camera lens. You can adjust the speed of the lens zoom in Settings--PTZ--Pan & Tilt Speed--Zoom speed panel. Pan/Tilt Control 3 4 1----- Up control button, 2-----Down control button, 3------Left control button, 4------Right control button Click this button and go to center 1 2 19 Section 4 Cruise / Preset settings Cruise Settings The default cruise tracks have two types: Vertical and Horizontal. Vertical: The camera will rotate from up to down. Horizontal: The camera will rotate from left to right.
: Start cruise.
: Stop cruise. If you want to define or change the cruise trace, please go to Settings PTZ Preset Settings panel. How to do cruise?
Firstly: Select one track in the track dropdown list. Select one of these. Secondly: Click Start cruise button, the camera will cruise following the predefined path. Thirdly: Click stop button and finish cruising. Preset settings IPCam supports 16 preset positions, which is considered enough for DIY home & small business surveillance market The default preset position is Topmost, Bottom most, Left most, right most, you can add other preset positions. Add Click this icon to save the position you need the camera to remember 20 Delete Select one preset position and click this button to delete it. GO Select one preset position in the preset drop-down list and click Go to make the camera move the preset position How to do preset position?
Firstly, move the camera and stop at a desired place where you want make preset position. Secondly, click button and enter a descriptive name for the preset position. The preset position cannot contain special characters. Then click OK to save it. If you want to reset the preset position, click Cancel. After that, you can move the camera and stop at another place, and set another preset position. You can do all the 16 preset positions with this method. If you want to see one preset position you have set, only select the preset position name from the preset drop-down list, and click go button, the camera will go to the preset position. Section 5 IR LED Lights / Color Adjustment IR LED Lights Click Infra led and there are three modes to adjust the infrared led: Auto, Manual and Schedule. Auto: Select it and the camera will adjust the infra led (on or off) automatically. Manual: Select it and turn off the infra led manually. Schedule: Select it and the IR led light will be off at the schedule period. If you want to define or change the IR led lights schedule time, please go to Settings > Video > IR LED Schedule page. Color Adjustment In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality. 21 Section 6 OSD If you have added time and camera name in the video, you can see it in the live window. Go to Settings > Basic settings > Camera name panel, and you can change another device name. The default device name is anonymous. Go to Settings > Basic Settings > Camera time panel and adjust the device time. Go to Settings > Video > On Screen Display panel, you can add or no add OSD. Section 7 Play / Stop / Snap / Record / Full screen button 1------Play Click it to play the video of the camera 2------Stop Click it to stop the video of the camera 3 2 4 1 5 6 7
8
5 5 3------ Talk Click the button and the icon will become to
, then talk to the microphone that connected with PC, people around the camera can hear your voice if the camera has connected with audio output device. Click the icon again and stop talking. 4------ Audio Click the button and the icon will become to
, you can hear the sound around the camera if the camera has connected with other audio input device through the Audio Input port of the camera, Click the icon again and stop audio. 5----- Volume click it to open the volume control. 6----- Snap Click it to make snapshot and it pop up a window which picture you snapshot, right click in the window and save the picture to anywhere you want. 7----- Record Click the icon and the camera start recording, you can see a green dot in the live window. Click again and stop recording. The default storage path is C:\IPCamRecord. You can change the storage path: Go to Settings > Record > Storage Location panel. 8------Full Screen Click it to make full-screen, or you can double click the surveillance screen to make full-screen. Double click again and exit full-screen. Onscreen Mouse Control Right click the mouse and you can full screen and Zoom up. 22 Full Screen: Select it and Click it to make full-screen, press ESC and exit full-screen. Zoom Up / Down: Click it and the live view will be digital zoomed up, then click Zoom Down and the live view back to original size. NOTE: For Mac OS, the plugin cannot support Onscreen Mouse function, so you cannot allow to use it. 3.7 Advanced Camera Settings Click the button Settings, goes to Administrator Control Panel to make advanced camera settings. 3.7.1 Setup Wizard After logging in for the first time, you will go to "Setup Wizard" automatically. Here you can set the basic parameters of camera, such as the camera name, camera time, IP configuration and so on. 3.7.2 Status Status contains four columns: Device Information, Device Status, Session Status and Log, it will show you various information about your camera. 23 3.7.2.1 Device Information Camera Name: The Device Name is a unique name that you can give to your device to help you identify it. Click Basic Settings and go to Device Name panel where you can change your camera name. The default device name is anonymous. Camera ID: Display the MAC address of your camera. For example Device ID is A0E6EC012F32, the same MAC ID sticker is found at the bottom of the camera. Camera Time: The system time of the device. Click Basic Settings and go to Camera Time panel and adjust the time. System Firmware Version: Display the System Firmware version of your camera. Application Firmware Version: Display the application firmware version of your camera. Plug-In Version: Display the plug-in version of your camera 3.7.2.2 Device Status On this page you can see device status such as Alarm status, NTP status, IR LED Status and so on. 24 3.7.2.3 Session Status Session status will display who and which IP is visiting the camera now. 3.7.2.4 Log The log record shows who and which IP address accessed or logout the camera and when. Reboot the camera and clear the log records. 3.7.3 Basic Settings This section allows you to configure your Camera Name, Camera Time, Mail, User Accounts and Multi-Device. 3.7.3.1 Camera Name Default alias is Foscam_camera. You can define a name for your camera here such as apple. Click Save to save your changes. The alias name cannot contain special characters. 25 3.7.3.2 Camera Time This section allows you to configure the settings of the internal system clocks for your camera. Time Zone: Select the time zone for your region from the drop-down menu. Sync with NTP server: Network Time Protocol will synchronize your camera with an Internet time server. Choose the one that is closest to your camera. Sync with PC/Terminal: Select this option to synchronize the date and time of the Network Camera with your computer. Manually: The administrator can enter the date and time manually. Please select the date and time format. use DST: Select the use DST, then select the daylight saving time from the drop-down menu. Click Save button to submit your settings. NOTE: If the power supply of camera is disconnect, you need set the camera's time again. 3.7.3.3 User Accounts Here you can create users and set privilege, visitor, operator or administrator. The default administrator user accounts are admin with a blank password. 26 How to change the password?
Firstly, select the account which you want to change the password, then select Change password, enter the old password and the new password, lastly click modify to take effect. How to add account ?
Select one blank column, then enter the new user name, password and privilege, last click Add to take effect. You can see the new added account on the Account list. 27 Delete: Select the account which you want to delete, then click Delete button to take effect. NOTE: The default administrator account cannot be deleted, but you can add other administrator users. 3.7.3.4 Multi-Camera If you want to view multi-surveillance screens on one window, you need to login one camera, and set it as the main device, and do Multi-Device Settings, add other cameras to the first one camera. Before you do multi-cams settings, you need to assign different port such as 81, 82, 83, 84, 85, 86, 87, 88 to the cameras if there is 8 cameras installed. The firmware within the camera can support a maximum of 9 devices monitoring all at the same time. This page you can both add FOSCAM MJPEG and H.264 series cameras to the first camera and view multi-surveillance screen on one window. 28 Add Cameras on LAN In Multi-Device Settings page, you can see all devices searched in LAN. The 1st Device is the default one. You can add more cameras in the list in LAN for monitoring. The camera's software supports up to 9 IP Cameras online simultaneously. Click The 2nd Device and click the item in the Device List in LAN, the Alias, Host and Http Port will be filled in the boxes below automatically. Enter the correct username and password then click Add. Add more cameras in the same way. 1 Click it, camera model, alias, host and HTTP Port will be filled in the following boxes automatically. 3 Click Add to take effect. 2 Enter the User name and password of the 2nd camera. Camera Model: Our Company produces two series cameras: MJPEG and H.264. Here will show you which series the camera belongs to. 29 Back to Surveillance Windows, and click Four Windows option, you will see four cameras you added. 30 3.7.3.5 Status Light You can enable or disable status light. 3.7.3.6 Voice Prompt On this page, you can enable or disable voice prompt. Select Yes to enable or select No to disable. If select Yes, you can hear the voice prompt after connect the audio output device. 3.7.4 Network 3.7.4.1 IP Configuration This section will allow you to configure your camera's IP, Port, Mail Settings and FTP Settings and so on. If you want to set a static IP for the camera, please go to IP Configuration page. Keep the camera in the same subnet of your router or computer. 31 Changing settings here is the same as using the Equipment Search Tool. It is recommended that you use the subnet mask, gateway and DNS server from your locally attached PC. If you don't know the subnet mask, gateway and DNS server, you can check your computer's local area connection as follows:
Control Panel > Network Connections > Local Area Connections > Choose Support > Details. 32 If you don't know the DNS server, you can use the same settings as the Default Gateway. 3.7.4.2 Wireless Settings Step 1: Choose Settings on the top of the camera interface, and go to the Network panel on the left side of the screen, then click Wireless Settings. Click the Scan button and the camera will detect all wireless networks around the area. It should also display your router in the list. Click the Scan button to search for wireless networks. Click the Page number to see other wireless networks devices if there are more than 10. 33 Step 2: Click the SSID (name of your router) in the list, the corresponding information related to your network, such as the name and the encryption, will be filled into the relevant fields automatically. You will only need to fill in the password of your network. Make sure that the SSID, Encryption and the password you filled in are exactly the same for your router. 2 Enter the password of your router. 1 Click the SSID of your router and the relevant information will be filled in the fields automatically. 3 Click Test to check if the password is correct or not. Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable. Never shut down the power of the camera until the IP camera is able to connect to the wireless network. The LAN IP address will disappear on the window of Equipment Search Tool when the camera is configuring a wireless connection. Wait about 1 minute, the camera should obtain a wireless connection, and the LAN IP of the camera will show again on the window of the Equipment Search Tool. The IP address may have changed after the camera receives a wireless connection; we recommend setting a static local IP address if this IP address changes by right clicking the camera in Equipment Search Tool, setting a static IP, and pushing OK. Congratulations! You have set up the wireless connection of the camera successfully. NOTE :
If you fail to make a wireless connection, please refer to your seller or contact us directly for assistance. 3.7.4.3 Port This camera supports HTTP Port. HTTP Port is used to access the camera remotely. If you want to access the camera and view the video, the HTTP Port must both be configured correctly. 34 HTTP port: By default, the HTTP is set to 88. Also, they can be assigned with another port number between 1 and 65535. But make sure they can not be conflict with other existing ports like 25, 21. Another way to change the HTTP port NO. Step 1: Open the Equipment Search Tool, select the camera you would like to change the port of, right click on the IP address, and click on Network Configuration, this brings up the network configuration box as flowing figures. Select which camera youd like to change the port for, and right click. Modify the Http Port. Enter the Username and password, click OK. Step 2: Enter the username and password of the Administrator (default username is admin with a blank password), and click OK to apply changes. Step 3: Wait around 10 seconds, youll see that the cameras LAN IP address has changed. In our example it was changed to 2000, so we see http://192.168.1.110:2000 in Equipment Search Tool. Also, 35 the LAN IP address is now fixed at a static IP address of http://192.168.1.110:2000. This IP address will not change even if the camera is powered off and back on, the camera will remain on this LAN IP address. This is very important that a static LAN IP address is set, or you may have problems later with remote access and seeing the camera remotely if the camera loses power and reconnects on a different LAN IP address. Make sure you set a static LAN IP address!
If the camera cannot be accessed, please make sure the port forwarding is succeed. HTTPS port: The default port is 443. You can use the url to access the camera: https:// IP + HTTPS port. ONVIF port: By default, the ONVIF port is set to 888. Also, they can be assigned with another port number between 1 and 65535(except 0 and 65534). But make sure they can not be conflict with other existing ports. 3.7.4.4 Mail Settings If you want the camera to send emails when motion has been detected, here Mail will need to be configured. 5 1 6 2 3 4 1----- SMTP Server / Port / Transport Layer Security Enter SMTP server for sender. SMTP port is usually set as 25. Some SMTP servers have their own port, such as 587 or 465, and Transport Layer Security usually is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be set to 465 or 25 or 587, which port you choose should be decided by which 36 Transport Layer Security you select. 2-----SMTP Username / password ID account and password of the sender email address 3----- Sender E-mail Mailbox for sender must support SMTP 4----- Receiver Mailbox for receiver need not support SMTP, you can set 4 receivers 5----- Save Click Save to take effect 6----- Test Click Test to see if Mail has been successfully configured. Click Test to see if Mail has been successfully configured. Test result. If the test success, you can see the Success behind the Test, at the same time the receivers will receive a test mail. If the test fails with one of the following errors after clicking Test, verify that the information you entered is correct and again select Test . 1) Cannot connect to the server. 2) Network Error. Please try later. 3) Server Error. 4) Incorrect user or password. 5) The sender is denied by the server. Maybe the server need to authenticate the user, please check it and try again. 6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server. 7) The message is denied by the server. Maybe because of the anti-spam privacy of the server. 8) The server does not support the authentication mode used by the device. 3.7.4.5 FTP Settings If you want to upload record images to your FTP serveryou can set FTP Settings. 37 FTP server: If your FTP server is located on the LAN, you can set as Figure as above. If you have an FTP server which you can access on the internet, you can set as below. Port: Default is port 21. If changed, external FTP client program must change the server connection port accordingly. FTP Mode: Here supports two modes: PORT and PASV. Username / password: The FTP account and password. Click Save to take effect. Click Test to see if FTP has been successfully configured. 38 3.7.4.6 P2P Access the camera by smart phone (Android or iOS operating system), please refer to the Quick Setup Guide. First of all, you need to open the P2P function of the camera at Settings > Network > P2P. 3.7.4.7 Onvif By default, the ONVIF port is set to 888. Also, they can be assigned with another port number between 1 and 65535(except 0 and 65534). But make sure they can not be conflict with other existing ports. 3.7.5 Video 3.7.5.1 Video Settings This section allows you to configure Video stream settings, On screen display and Snapshot settings. There are two ways to set the stream video settings. They are main stream video settings and sub stream video settings. 39 Stream Type: There are four types to identify different streams you have set. If select the HD Mode, the clearer video will become, and it will take up more bandwidth. Resolution: The camera supports multiple types, For example: 2K, 1080P, 720P, VGA. The higher the resolution is, the clearer video will become. But the code flux will become larger too, and it will take up more bandwidth. (Different models support different specific types. ) Bit Rate: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is large, that will lead to video can not play well. Frame Rate: Note that a larger frame size takes up more bandwidth. You should lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve fluently video.The maximum frame rate for each model is different. Key Frame Interval: The time between last key frame and next key frame. The shorter the duration, the more likely you will get a better video quality, but at the cost of higher network bandwidth consumption. Variable bitate:Tthe camera will change the video bit rate according to the situation, but will not more than the maximum parameter "Bit Rate". You can select "Yes" or "No" " to turn on and off Variable Bitate 3.7.5.2 On Screen Display This page is used to add timestamp and device name on the video. Display Timestamp: There are two options: Yes or NO. Select Yes and you can see the system date on the video. Display Camera Name: There are two options: Yes or NO. Select Yes and you can see the device name 40 on the video. 3.7.5.3 Snapshot Settings In this page you can set the snapshot pictures' image quality and the storage path. Manual snap Quality: Low, Middle and High. The higher the quality, the picture will be clearer. Pictures Save To: FTP or SD card. If you have done FTP and Alarm settings, when alarming, the camera will snap pictures to the FTP or SD card automatically. If you select the FTP, you can set the file name which the picture save to. For example: file name is
"NAME", the snapshot picture is "NAME_20150605-180000.jpg". Enable timing to capture To enable capture interval, follow the steps below:
1 Select Enable timing to capture 2 Capture interval: The interval time between two captures. 3 Select the capture time Capture anytime Click the black button up the MON, you will see all time range turn red. When something moving in the detection area at anytime, the camera will capture. Specify an capture schedule Click the week day words, the corresponding column will be selected. For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, the camera will capture. Press the left mouse and drag it on the time boxes, you can select the serial area, 4 Click Save button to take effect. 41 3.7.5.4 IR LED Schedule On this page you can set the schedule time for switching IR LED lights. When parameter Mode is set to the Schedule on the Live Video window, At these schedule time, the IR LED lights will be turned off. 3.7.6 Detection This section allows you to configure Motion Detection and Motion Sound Detection. 3.7.6.1Motion Detection IP Camera supports Motion Detection Alarm, when the motion has been detected, it will send emails or upload images to FTP. 7 2 3 1 4 5 6 To enable motion detection, follow the steps below:
1 Enable Motion detection and Human Detect 2 Sensitivity--- The higher the sensitivity, the camera will be more easily alarmed. Select one motion sensitivity. 42 3 Trigger interval--- The interval time between two motion detections. Here supports 5s / 6s / 7s / 8s /
9s / 10s / 11s / 12s / 13s / 14s / 15s. Select one interval time. 4 There are some alarm indicators:
A Camera Sound and PC Sound If the camera has connected with a speaker or other audio output device, if you select Camera Sound or PC Sound, when the motion has been detected, the people around the camera will hear beep alarm sound. B Send E-mail If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail Settings first. C Take Snapshot If you select this checkbox, when the motion has been detected, the camera will snap the live view window as a still picture and load it to the FTP. Make sure you have set FTP and set FTP as the storage path in Video > Snapshot settings panel. Time interval: The interval time between two pictures. D Recording If you select this checkbox, when the motion has been detected, the camera will recording and load it to the FTP server. Make sure you have set FTP and set FTP as the storage path in Video > Snapshot settings panel. E Push message to the phone If you select this checkbox, when the motion has been detected, the camera will push the message to the phone which has been connected the camera. 5 Set Detection Area Click set detect area and it pop up a window, then you can draw the detection area. Click Back button after settings. When something moving in the detection area, the camera will alarm. 43 6 Alarm Schedule Alarm anytime when motion is detected Click the black button up the MON, you will see all time range turn red. When something moving in the detection area at anytime, the camera will alarm. Click this button and select all time range . Specify an alarm schedule Click the week day words, the corresponding column will be selected. For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, when something moving in the detection area, the camera will alarm. 44 Press the left mouse and drag it on the time boxes, you can select the serial area, 7 Click Save button to take effect. When the motion is detected during the detection time in the detection area, the camera will alarm and adopt the corresponding alarm indicators. NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and anytime. 3.7.6.2Sound Detection When the ambient sound over a certain decibel ,the sound alarm will be triggered. If the Sensitivity is set to High, the camera will detect the sound whose more than 55db. If the Sensitivity is set to Medium, the camera will detect the sound whose more than 65db. If the Sensitivity is set to Low, the camera will detect the sound whose more than 75db. 45 If the Sensitivity is set to Lower, the camera will detect the sound whose more than 85db. If the Sensitivity is set to Lowest, the camera will detect the sound whose more than 95db. 3.7.7 Record 3.7.7.1 Storage Location Recording Location: SD card, FTP. SD card: The video will be saved in SD card. Make sure the camera has been inserted the SD card. On this page, you can see the available space of the SD card. FTP: The video will be saved in FTP. Please refer to 3.7.4.5 FTP Settings. Local Recording Location: For Windows OS, the manual recording path is C:/ IPCamRecord, you can change another one. For MAC OS, the manual recording path is: / IPCamRecord. Enter the local folder: Click here,you can enter the local folder. 3.7.7.2 Alarm Recording 3.7.7.3 Local Alarm Recording On this page you can enable local alarm record, and select the local alarm record time. 46 3.7.7.4 Schedule Recording When the video is selected as FTP, the device supports scheduled recording. When the video is selected as SD card, the device supports pumping frame recording. 47 Record frame: There are six frame selections, such as 1 / 30, 4 / 30, 8 / 30, 15 / 30, 24 / 30, 30 / 30. Recommended default is 4 / 30. The greater the Frame rate is, the sharper picture quality is, and the greater of storage space is, the shorter the storage time is. Record full strategy: When the SD card is full, you can choose to cover the previous recording, or stop recording. NOTES:
Scheduled recording only supports video saved to the SD card or FTP server. The schedule recording will stop while alarm recording is beginning, and it will continue automatically after alarm recording end. You can refer to 3.7.6.1 Motion Detection > 5 Alarm Schedule. in Alarm about editing the time of recording Schedule. 3.7.7.5 SD Card Management The SD card Slot inside the camera, if you want to install or remove the Micro SD card, you need to open the camera. When you plug in the Micro SD card during the camera work process, please reboot the camera again, or else the SD Card may be cannot work well. Go to the Settings > Status > Device Status page, you can see the SD card status. 48 The default storage path of alarm record files is SD card, when the available size of SD card is less than 256M, the old record files will be deleted automatically. 3.7.8 PTZ This page will allow you to change the pan/tilt speed and do cruise tracks settings. 3.7.8.1 Pan & Tilt Speed There are five Pt speed types: very fast, fast, normal, slow and very slowly. Select the desired PTZ speed type and click save button. There are three zoom speed types: fast, normal, slow. 3.7.8.2 Cruise Settings This section explains how to add/ delete/ alter one cruise track. 49 Setting the Cruise Mode Cruise mode: Cruise time. Cruise time: Select Cruise time from Cruise Mode drop-down, then you can set the Cruise time of the camera. Click Save to take effect. Manage the Cruise Track There are two default cruise tracks: Vertical and Horizontal. Vertical: The camera will rotate from up to down Horizontal: The camera will rotate form left to right. Add: Add one cruise track, then click save button. Delete: Select one cruise track and delete it. Save: After you modify the Dwell time, you should click Save button to take effect. Example How to do add cruise tracks ?
Firstly, Click Add button and enter a descriptive name to identify the cruise track. Secondly: On the lower left of the page, you can see all preset points you have added. Select one preset point and click Add button, you can see the preset point has been added to the cruise track on the cruise track page. You need to add two or more preset points to the cruise track. The new added track name. 1 Select one preset point. 2 Click Add button. 50 Here you can see the preset point has been added to one track. And you can set the stay time. Thirdly: Click OK button and the cruise track will take effect. You can add other cruise track as the same method. For example: I have added three preset points to the track 1, that means : When I select the track 1 on the surveillance window, the camera moves as the following track: upright then Right Most last down left. You can add preset on the left of the surveillance window. Add the preset. 51 After add the cruise track, back to the surveillance window, click Cruise, here you can see all cruise tracks you have added. The cruise tracks have added to the track 1. There are other buttons between the Preset points and Cruise track, you can use these buttons to adjust the order of preset points or add/delete one preset points in one cruise track. Add: Select one preset points and add it to the selected cruise track. Delete: Select one preset points you have added to one cruise track, click delete. Move up/ down: Select one cruise track, adjust the order of preset points in one cruise track. Attention:
Considering the life time and thermal issue of the motor, its not recommend to do long-time cruise. 3.7.8.3 Start-Up Options Here section will allow you to set the stop position after the camera reboots. It supports three modes: No self test, Goto home position and Goto preset point. No self test: When rebooting, the camera will not pan / tilt. Goto home position: When rebooting, the camera will pa Providing Central Management Software to manage or monitor multi-cameras n / tilt and stops at center. Go to Preset point: Select one preset position and save it. When rebooting, the camera will pan/ tilt and stops at the preset position you have set. 52 3.7.9 Firewall This section explains how to control the access permission by checking the client PC's IP addresses. It is composed of the following columns: Block access from these IP addresses and Only allow access from these IP addresses. Enable firewall, If you select Only allow access from these IP addresses and fill in 8 IP addresses at most, only those clients whose IP addresses listed in the Only allow access from these IP addresses can access the Network Camera. If you select Block access from these IP addresses, only those clients whose IP addresses are in the IP list cannot access the Network Camera. Click Save to take effect. 3.7.10 System In this panel, you can backup/restore your camera settings, upgrade the firmware to the latest version, restore the camera to default settings and reboot the device. 3.7.10.1 Back-up & Restore Click Backup to save all the parameters you have set. These parameters will be stored in a bin file for future use. 53 Click Browse and select the parameters file you have stored, then click Submit to restore the restore the parameters. 3.7.10.2 System Upgrade Click Download the latest firmware, you will see the following screen. And click Save to save the firmware on your computer locally. Your current firmware version will be displayed on your screen. You may go to the Status > Device Information page to check for the latest firmware versions available. Click Browse, choose the correct bin file and then click System upgrade. Don't shut down the power during upgrading. After upgrading, you can see the upgrade result. Upgrade Firmware by Equipment Search Tool Double click the Equipment Search Tool shot icon
, select the Camera IP that you want to upgrade the firmware. Then select Upgrade Firmware and enter the username and password, choose the firmware file, and upgrade. 54 CAUTION:
We recommend that you regularly update your camera to the latest available software and firmware versions to help ensure the best experience for your camera. NOTE:
1) Please ensure you have download the correct firmware package for your camera before upgrading. Read the upgrade documentation (readme.txt file) in the upgrade package before you upgrade. 2) Upon downloading the firmware check the sizes of the .bin files. They must match the size in the readme.txt file. If not, please download the firmware again until the sizes are the same. Your camera will not function correctly if a corrupt .bin file is used. 3) Never shut down the power of the camera during upgrade until the IP camera restart and get connected. 4) After upgrade successfully, please clear the cache of browser, uninstall the old plugin and re-install it, then reset the camera to the default factory settings before using the camera. 55 3.7.10.3 Patch Installation Click Browse to select the correct patch file, and then click Install Patch to install the patch. Do not turn off the power during it installing. After installing is complete, you will receive a system prompt. 3.7.10.4 Factory Reset Click Factory Reset button and all parameters will return to factory settings if selected. The default administrator username is admin with a blank password. 3.7.10.5 Reboot Click Reboot to reboot the camera. This is similar to unplugging the power to the camera. 3.8 Playback On this page you can view the record files stored in the SD card. 56 Section 1 Define the Record files time and Type
: The storage path of record files
: Here supports three types: current day, current month and All records. Another way, select the time on the time&date manually.
: The type of records files, Here supports two types: Normal record, Alarm record and All records.
: Click this button to search all record files satisfy the conditions you selected. Continuous Play: Select the checkbox to play continuously all the record files. Section 2 Search record files On this panel you can see all record files satisfy the conditions you set. Section 3 Play / Stop / audio / Full screen Buttons 57 Please select one record file before use these buttons. Click this button to play the record files. Click this button to stop the record files. Click this button to audio on / mute. Click this button to make full screen, and double click left mouse to exit full screen. 58 4 Surveillance Software Foscam VMS 4.1 Hardware Connection & Software Installation 1. Connect the camera to the LAN network (Router or Switch) via network cable. 2. Visit Foscam official website foscam.com/vms , then you can find the FoscamVMS_Beta, Please download it 4.2 Software Installation 1) Double click the software and follow the setup wizard to install the program. 59 2) The FoscamVMS icon will appear on the desktop automatically after a successful installation. Note:
Sometimes the program will be treated as virus, so before installing, please add the software as trusted program on your computer. 4.3 Create Acount For your privacy and security, you can create a lacal adminstrator account. you haven't created a local administator account, please click Create Account to create. After creating a local administrator account, you can:
1. Use the account to log in to the client to ensure information security. 2. Create sub-accounts and assign different permissions for management. 60 4.4 Add Device 4.4.1 LAN Add Click Add Device button, then follow below steps:
Step1 Select the device type , the default type is IPC(IP camera). Step2 Click the IP address of the camera on the list. Step3 Enter the username and password of the camera. Step4 Click Add. 61 Please Note: Make sure the camera and PC are both in the same Local Area Network (LAN). 4.4.2 Manual LAN via IP You can add the camera use manual LAN also. Click the Manual LAN first, then follow below steps:
Step1 Select the IP Step4 Click Add. Step2 Enter the IP and Port (IP and port can be viewed in Add Device) Step3 Enter the username and password of the camera. 62 You can add the camera use manual LAN also. Click the Manual LAN first, then follow below steps:
4.4.3 Manual LAN via P2P Step1 Select the P2P Step2 Enter the UID (located on your camera) Step3 Enter the username and password of the camera. Step4 Click Add. 63 4.5 Surveillance Software GUI 1 3 5 2 4 6 add cameras to it. Section1 Menu Bar window. SD card. First time you login the software, the whole video window is gray, you need to connect the cameras and Path to surveillance window. Click this button enter to Device List and back to the surveillance Playback the video recording, you can choose playback type and play video on local or Add Device, please refer chapter 3.4 for the detail setting. More, You can Setting Personal Account, Preference, Left Bar and Switch Account. 64 Section2 Left Bar Left Bar of Live: You can view the list of connected cameras 1----- Setup Click the button Settings, goes to Device Settings Control Panel to make advanced camera settings. 2-----Device Connection Account Click the button Settings, goes to connection Settings 2 3 4 1 3-----SD Card This camera dont support the SD card function. This function is not available 4-----Delete Click the button, Delete the device. 65 Section3 Live Window 1 4 2 3 1-----Close Click the icon to close this channel live window 2-----Device Name Show view channel and camera name. 3-----Recording and Alarm status This icon will turn to red, it indicates that the camera is recording This icon will turn to yellow, the motion is detected during the detection time in the detection area, the camera alarm and adopt the corresponding alarm indicators 4----- Record / Snap Shot / Sound / Tlak button Record Snap Shot Sound Tlak Record ----- Click it and do manually recording. When recording, icon 1 will turn to blue. Click it again and stop recording. The recording files will be stored to C disk automatically Snap Shot ----- Click it to make snapshot. After snapshot, the button banner will prompt Captured Successfully. And you can find the picture on default path C:\VMS_CAPTURE 66 Sound ----- Click the icon then you will hear sound captured by the camera's built-in microphone. You may need to plug in earphones or enable the computer speakers to hear from the camera's microphone. Make sure the camera supports audio. Click again and stop audio. Tlak ----- Click the button, then talk to the microphone that connected with PC, people around the camera can here your voice. Click the icon again and stop talking. Section4 The number of split-screen Click this button to select the number of split-screen on one page. The client can monitor many cameras at one page, here you can choose the display number. The maximum number is 16. Section5 Live Cruise / Close All / Full Screen / Hide Bar Live Cruise ----- Click this button to Live Cruise, you can click button to add a loop page for Cruise or click button to reduce the loop page for live Cruise. Close All ----- Click this button to close all the cameras Full Screen ----- Click this button to enter full screen, Click this button to enter full screen, then click to exit full screen. Hide Bar ----- Click this button, Hide and show Pan / Tilt control Bar Section6 Cruise / Focus buttons / Pan / Tilt control / Zoom buttons/ Preset live 67 Cruise Settings The default cruise tracks have two types: Vertical and Horizontal. Vertical: The camera will rotate from up to down. Horizontal: The camera will rotate from left to right.
:Start cruise.
: Stop cruise. If you want to define or change the cruise trace, please go to Device Settings PTZ Cruise Settings panel. How to do cruise?
Firstly: Select one track in the track dropdown list. Select one of these. Secondly: Click Start cruise button, the camera will cruise following the predefined path. Thirdly: Click stop button and finish cruising. Zoom in or Zoom out Click or
,The focal length of the camera lens will be larger or shrink, you can adjust the focus distance to the target object size, access to high-definition screen. Focus: Optical zoom Zoom: Magic Zoom Pan/Tilt Control 68 3 5 7 1 2 6 8 4 1----- Up control button, 2-----Down control button, 3------Left control button, 4------Right control button, 5----- Up-Left control button 6----- Up-Right control button 7----- Down-Left control button 8----- Down-Right control button Click this button and go to center Preset settings IP Camera supports 16 preset positions, which is considered enough for DIY home & small business surveillance market The default preset position is Topmost, Bottom most, Left most, right most, you can add other preset positions. Add Click this icon to save the position you need the camera to remember Delete Select one preset position and click this button to delete it. GO Select one preset position in the preset drop-down list and click Go to make the camera move the preset position How to do preset position?
Firstly, move the camera and stop at a desired place where you want make preset position. Secondly, click button and enter a descriptive name for the preset position. The preset position cannot contain special characters. Then click OK to save it. If you want to reset the preset position, click Cancel. After that, you can move the camera and stop at another place, and set another preset position. You can do all the 16 preset positions with this method. If you want to see one preset position you have set, only select the preset position name from the preset drop-down list, and click go button, the camera will go to the preset position. 69 4.6 Advanced Camera Settings Click the button, goes to Device Settings to make advanced camera settings. 4.6.1 Status Status contains two columns: Device Information and Logs, it will show you various information about your camera. 4.6.1.1 Device Information Device Model: The model of the device. Device Name: The Device Name is a unique name that you can give to your device to help you identify it. Click Basic Settings and go to Camera Name panel where you can change your camera name. The default device name is Foscam_camera. System Firmware Version: Display the System Firmware version of your camera. App Firmware Version: Display the application firmware version of your camera. 70 Device ID: Display the MAC address of your camera. For example Device ID is 00626EE96E3C, the same MAC ID sticker is found at the bottom of the camera. Device Time: The system time of the device. Click Basic Settings and go to Device Time panel and adjust the time. 4.6.1.2 Device Status On this page you can see device status such as Alarm status, NTP status, IR LED Status and so on. 4.6.1.3 User Access Status Session status will display who and which IP is visiting the camera now 71 4.6.1.4 Logs The log record shows who and which IP address accessed or log out the camera. Click the page number and go to the corresponding page to see more logs Full in one page number, click go GO button and go to the corresponding page. 4.6.2 Basic This section allows you to configure your Device Name, Time, User Accounts, Status Light and Voice Prompt. 72 4.6.2.1 Camera Name Default alias is Foscam_camera. You can define a name for your camera here such as apple. Click Save to save your changes. The alias name cannot contain special characters. 4.6.2.2 Device Time This section allows you to configure the settings of the internal system clocks for your camera. Time Zone: Select the time zone for your region from the dropdown menu. Sync with NTP server: Network Time Protocol will synchronize your camera with an Internet time server. Choose the one that is closest to your camera. Use DST: Select the use DST (Daylight Saving Time, to set the clock ahead of the real-time), then set the start time and end time of the DST, select the daylight saving time from the drop-down menu at last. Click Save button and submit your settings. 73 4.6.2.3 User Accounts Here you can create users and set privilege, visitor, operator or administrator. The default administrator user accounts are administrator with a blank password. How to change the password?
Firstly, select the account which you want to change the password, then select Change password, enter the old password and the new password, lastly click modify to take effect. How to change the username?
Select the account which you want to change the username, then select Change username, enter the new username and the password, lastly click modify to take effect. 74
. 4.6.2.4 Status Light If you have a power and network status light on your camera, you can turn it on and off with this feature. This camera dont have the status light described above. 4.6.2.5 Voice Prompt You can set the voice prompt on the camera to turn on and off if you connect an external audio device. 75 4.6.3 Network 4.6.3.1 IP This section will allow you to configure your camera's information. If you want to set a static IP for the camera, please go to IP page. Keep the camera in the same subnet of your router or computer. It is recommended that you use the subnet mask, gateway and DNS server from your locally attached PC. If you don't know the subnet mask, gateway and DNS server, you can check your computer's local area connection as follows:
Control Panel--Network Connections--Local Area Connections --Choose Support--Details. 76 If you don't know the DNS server, you can use the same settings as the Default Gateway. 4.6.3.2 WiFi Step 1: Click the display your router in the list. button and the camera will detect all wireless networks around the area. It should also 77 Click the button to search for wireless networks. Step 2: Click the SSID (name of your router) in the list, the corresponding information related to your network, such as the name and the encryption, will be filled into the relevant fields automatically. You will only need to fill in the password of your network. Make sure that the SSID, Encryption and the password you filled in are exactly the same for your router. 78 2 Enter the password of your router . 3 Click Test to check if the password is correct or not. 1 Click the SSID of your router and the relevant information will be filled in the fields automatically. Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable. Never shut down the power of the camera until the IP camera is able to connect to the wireless network. The LAN IP address will disappear on the window of Add Device when the camera is configuring a wireless connection. Wait about 1 minute, the camera should obtain a wireless connection, and the LAN IP of the camera will show again on the window of Add Device The IP address may have changed after the camera receives a wireless connection; we recommend setting a static local IP address if this IP address changes by right clicking the camera in Equipment Search Tool, setting a static IP, and pushing OK . Congratulations! You have set up the wireless connection of the camera successfully. NOTE: If you fail to make a wireless connection, please refer to your seller or contact us directly for assistance. 4.6.3.3 Port This camera supports HTTP Port / HTTPS Port/ ONVIF Port. HTTP Port is used to access the camera remotely. HTTP port: By default, the HTTP is set to 88. Also, they can be assigned with another port number between 1 and 65535. But make sure they can not be conflict with other existing ports like 25, 21. 79 1 2 4.6.3.4 Mail Settings If you want the camera to send emails when motion has been detected, here Mail will need to be configured. 6 3 5 5 1----- SMTP Server/ Port /Transport Layer Security Enter SMTP server for sender. SMTP port is usually set as 25. Some SMTP servers have their own port, such as 587 or 465, and Transport Layer Security usually is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be set to 465 or 25 or 587, which port you choose should be decided by which Transport Layer Security you select. 2----- SMTP Account/ password ID account and password of the sender email address 80 3----- E-mail Sender Mailbox for sender must support SMTP 4----- Receiver Mailbox for receiver need not support SMTP, you can set 4 receivers 5----- Save Click Save to take effect 6----- Test Click Test to see if Mail has been successfully configured. Click Test to see if Mail has been successfully configured. If the test success, you can see the Success behind the Test, at the same time the receivers will receive a test mail. If the test fails with one of the following errors after clicking Test, verify that the information you entered is correct and again select Test . 1) Cannot connect to the server 2) Network Error. Please try later 3) Server Error 4) Incorrect user or password 5) The sender is denied by the server. Maybe the server need to authenticate the user, please check it and try 6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server 7) The message is denied by the server. Maybe because of the anti-spam privacy of the server 8) The server does not support the authentication mode used by the device. again 4.6.3.5 FTP If you want to upload record images to your FTP server, you can set FTP. 81 FTP server: If your FTP server is located on the LAN, you can set as Figure a. If you have an FTP server which you can access on the internet, you can set as Figure b. Port: Default is port 21. If changed, external FTP client program must change the server connection port accordingly. Mode: Here supports two modes: PORT and PASV. Username / password: The FTP account and password. Click Save to take effect. Click Test to see if FTP has been successfully configured. 4.6.3.6 P2P Access the camera by smart phone (Android or iOS operating system) First of all, you need to open the P2P function of the camera at
> Network > P2P. 4.6.3.7 Onvif By default, the ONVIF port is set to 888. Also, they can be assigned with another port number between 1 and 65535 (except 0 and 65534). But make sure they can not be conflict with other existing ports. 82 This section allows you to configure Video Encode settings, On screen display, Snapshot and IR LED settings. 4.6.4 Video 4.6.4.1 Video Encode This is main Encode video settings. Stream type: There are four types to identify different streams you have set. Resolution: The camera supports multiple types, For example: 1080P, 720P, VGA. The higher the resolution is, the clearer video will become. But the code flux will become larger too, and it will take up more bandwidth. (Different models support different specific types. ) Bit Rate: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is large, that will lead to video can not play well. Frame Rate: Note that a larger frame size takes up more bandwidth. When the video format is 50Hz, the maximum frame rate is 25 fps. When the video format is 60Hz, the maximum frame rate is 30 fps. You should lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve fluently video. Key Frame Interval: The time between last key frame and next key frame. The shorter the duration, the more likely you will get a better video quality, but at the cost of higher network bandwidth consumption. Variable Bitrate: Select the Bit rate type to constant or variable. If select Yes, the camera will change the video bit rate according to the situation, but will not more than the maximum parameter "Bit Rate"; If select No, the Bit Rate is unchanged. 83 4.6.4.2 On Screen Display This page is used to add timestamp and device name on the video. Display Timestamp: There are two options: Yes or NO. Select Yes and you can see the system date on the video, Display Camera Name: There are two options: Yes or NO. Select Yes and you can see the device name on the video. 4.6.4.3 Snapshot On this page you can set the snapshot pictures' image quality and the storage path. Manual Snap Quality: Low, Middle and High. The higher the quality, the picture will be clearer. Pictures Save To: FTP. If you have done FTP and Alarm settings, when alarming, the camera will snap pictures to the FTP automatically. If you select the FTP, you can set the file name which the picture save to. Enable Timing to Capture To enable capture interval, follow the steps below:
1 Select Enable timing to capture 2 Capture interval: The interval time between two captures. 84 3 Select the capture time Capture anytime Click the black button up the MON, you will see all time range turn red. When something moving in the detection area at anytime, the camera will capture. Specify an capture schedule Click the week day words, the corresponding column will be selected. For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, the camera will capture. Press the left mouse and drag it on the time boxes, you can select the serial area, 4 Click Save button to take effect. 4.6.4.4 IR LED There are three modes to set the IR LED lights. brightness of enviroment. IR LED lights. Auto: The default mode is auto. On this mode, IR LED lights will be switched automatically depended on the Manual: On this mode, you can click On option to turn on the IR LED lights, and click Off option to turn off the Schedule: On this mode, IR LED lights will be turned off during the setting schedule .You can set the period of time during which the infrared lamp is turned off to prevent your baby from being influenced during sleep. You can also turn off the infrared lamp on the video preview page at any time. 85 4.6.4.5 Color Adjustment You can adjust the settings to your liking. 4.6.5 Detector 4.6.5.1 Motion Detection IP Camera supports Motion Detection Alarm, when the motion has been detected, it will send emails or upload images to FTP. 86 1 2 3 4 5 6 7 To enable motion detection, follow the steps below:
1 Enable Detection Switch 2 Sensitivity---- It supports three modes: Low, Middle and High. The higher the sensitivity, the camera will be more easily alarmed. Select one motion sensitivity. 3 Trigger Interval----The interval time between two motion detections. Here supports 5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time. 4 Snap Interval---- The interval time between two pictures. 5 Select the alarm indicators There are some alarm indicators:
A Camera Sound If you select Camera Sound, when the motion has been detected, the people around the Camera will hear beep alarm sound, if the device is connected with the audio output device. B PC Sound If you select PC Sound, when the motion has been detected, the people around the PC will hear beep alarm sound. 87 C Send E-mail If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail Settings first. D Recording If you select this checkbox, when the motion has been detected, the camera will recording and load it to the FTP server. Make sure you have set FTP and set FTP as the storage path in Video->Snapshot settings panel
. E Take Snapshot If you select this checkbox, when the motion has been detected, the camera will snap the live view window as a still picture and load it to the FTP. Make sure you have set the storage path in Video > Snapshot Settings panel. F Push message to the phone If you select this checkbox, when the motion has been detected, the camera will push the message to the phone which has been connected the camera. 6 Alarm Schedule 1. Alarm anytime when motion is detected Click the black button up the MON, you will see all time range turn red. When something moving in the detection area at anytime, the camera will alarm. Click this button and select all time range. 2. Specify an alarm schedule Click the week day words, the corresponding column will be selected. For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, when something moving in the detection area, the camera will alarm. 88 3. Press the left mouse and drag it on the time boxes, you can select the serial area, 7 Click Save button to take effect. When the motion is detected during the detection time in the detection area, the camera will alarm and adopt the corresponding alarm indicators. NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and anytime. 4.6.5.2 Sound Detection When the ambient sound over a certain decibel ,the sound alarm will be triggered. 89 1 2 3 4 5 6 7 To enable motion detection, follow the steps below:
1 Enable Detection Switch 2 Sensitivity---- It supports three modes: Low, Middle and High. The higher the sensitivity, the camera will be more easily alarmed. Select one motion sensitivity. 3 Trigger Interval----The interval time between two motion detections. Here supports 5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time. 4 Snap Interval---- The interval time between two pictures. 5 Select the alarm indicators There are some alarm indicators:
A Camera Sound If you select Camera Sound, when the sound has been detected, the people around the Camera will hear beep alarm sound, if the device is connected with the audio output device. B PC Sound If you select PC Sound, when the sound has been detected, the people around the PC will hear beep alarm sound. 90 C Send E-mail If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail Settings first. D Recording If you select this checkbox, when the sound has been detected, the camera will recording and load it to the FTP server. Make sure you have set FTP and set FTP as the storage path in Video->Snapshot settings panel
. E Take Snapshot If you select this checkbox, when the sound has been detected, the camera will snap the live view window as a still picture and load it to the FTP. Make sure you have set the storage path in Video > Snapshot Settings panel. F Push message to the phone If you select this checkbox, when the sound has been detected, the camera will push the message to the phone which has been connected the camera. 6 Alarm Schedule 4. Alarm anytime when sound is detected Click the black button up the MON, you will see all time range turn red. When something moving in the detection area at anytime, the camera will alarm. Click this button and select all time range. 5. Specify an alarm schedule Click the week day words, the corresponding column will be selected. For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, when something sound in the detection area, the camera will alarm. 91 6. Press the left mouse and drag it on the time boxes, you can select the serial area, 7 Click Save button to take effect. When the sound is detected during the detection time in the detection area, the camera will alarm and adopt the corresponding alarm indicators. NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and anytime. 4.6.6 PTZ This page will allow you to change the pan/tilt speed and do cruise tracks settings. 4.6.6.1 PTZ Parameters There are five Pt speed types: very fast, fast, normal, slow and very slowly. Select the desired PTZ speed type and click save button. 92 There are three zoom speed types: fast, normal, slow 4.6.6.2 Cruise Settings This section explains how to add/ delete/ alter one cruise track. Setting the Cruise Mode Cruise mode: Cruise time. Cruise time: Select Cruise time from Cruise Mode drop-down, then you can set the Cruise time of the camera. Click Save to take effect. 93 Manage the Cruise Track There are two default cruise tracks: Vertical and Horizontal. Vertical: The camera will rotate from up to down Horizontal: The camera will rotate form left to right. Add: Add one cruise track, then click save button. Delete: Select one cruise track and delete it. Save: After you modify the Dwell time, you should click Save button to take effect. Example How to do add cruise tracks ?
Firstly, Click Add button and enter a descriptive name to identify the cruise track. Secondly: On the lower left of the page, you can see all preset points you have added. Select one preset point and click Add button, you can see the preset point has been added to the cruise track on the cruise track page. You need to add two or more preset points to the cruise track. 94 The new added track name. 1 Select one preset point. 2 Click Add button. Here you can see the preset point has been added to one track. And you can set the stay time. Thirdly: Click Save button and the cruise track will take effect. You can add other cruise track as the same method. For example: I have added three preset points to the track 1, that means : When I select the track 1 on the surveillance window, the camera moves as the following track: upright then Right Most last down left. You can add preset on the left of the surveillance window. Add the preset. 95 The cruise tracks have added to the track 1. After add the cruise track, back to the surveillance window, click Cruise, here you can see all cruise tracks you have added. 96 There are other buttons between the Preset points and Cruise track, you can use these buttons to adjust the order of preset points or add/delete one preset points in one cruise track.
: Select one preset points and add it to the selected cruise track.
: Select one preset points you have added to one cruise track, click delete. Attention:
Considering the life time and thermal issue of the motor, its not recommend to do long-time cruise. 4.6.6.3 Start-Up Options Here section will allow you to set the stop position after the camera reboots. It supports three modes: No self test, Goto home position and Goto preset point. Disable Start-up: When rebooting, the camera will not pan / tilt. Goto home position: When rebooting, the camera will pa Providing Central Management Software to manage or monitor multi-cameras n / tilt and stops at center. Go to Preset pointion: Select one preset position and save it. When rebooting, the camera will pan/ tilt and stops at the preset position you have set. 97 4.6.7 Record 4.6.7.1 Storage Management On this page you can choose Record Storage Path. The record storage path default is No Path 4.6.7.2 Alarm Recording On this page you can configure the Alarm-recording Time, Enable pre-recorded time and Pre-Record Time. 98 4.6.7.3 Schedule Recording On the page you can configure the schedule record. Note: Schedule Recording only supports FTP server. Schedule Recording can only be enabled after the recording path is set Please set the path in the storage management. Click Save button to take effect. 4.6.8 System In this panel, you can back up/restore your camera settings, upgrade the firmware to the latest version, restore the camera to default settings and reboot the device. 99 4.6.8.1 Back-up & Restore Click Backup to save all the parameters you have set. These parameters will be stored in a bin file for future use. Click Browse and select the parameters file you have stored, then click Submit to restore the restore the parameters. 4.6.8.2 System Upgrade Click Download the Latest Firmware, you will see the following screen. And click Save to save the firmware on your computer locally. Your current firmware version will be displayed on your screen. You may go to the Status > Device Information page to check for the latest firmware versions available. Click Browse, choose the correct bin file and then click System upgrade. Don't shut down the power during upgrade. After upgrading, you can see the upgrade result. Upgrade Firmware by Equipment Search Tool Double click the IP Camera Tool shot icon
, select the Camera IP that you want to upgrade the firmware. Then select Upgrade Firmware and enter the username and password, choose the firmware file, and upgrade. 100 CAUTION: We recommend that you regularly update your camera to the latest available software and firmware versions to help ensure the best experience for your camera. NOTE:
1) Please ensure you have download the correct firmware package for your camera before upgrading. Read the upgrade documentation (readme.txt file) in the upgrade package before you upgrade. 2) Upon downloading the firmware check the sizes of the .bin files. They must match the size in the readme.txt file. If not, please download the firmware again until the sizes are the same. Your camera will not function correctly if a corrupt .bin file is used. 3) Never shut down the power of the camera during upgrade until the IP camera restart and get connected. 4) After upgrade successfully, please clear the cache of browser, uninstall the old plugin and re-install it, then reset the camera to the default factory settings before using the camera. 4.6.8.3 Patch Installation Click "Browse" to select the correct patch file, and then click "Install Patch" to install the patch. Do not turn off the power during it installing. After installing is complete, you will receive a system prompt. 101 4.6.8.4 Factory Reset Click Factory Reset button and all parameters will return to factory settings if selected. 4.6.8.5 Reboot Click Reboot to reboot the camera. This is similar to unplugging the power to the camera. 102 103 5 Appendix 5.1 Frequently Asked Questions NOTE: Any questions you would meet, please check Network connections firstly. Check the working status revealed by the indicators on the network server, hub, and exchange. If abnormal, check the network connections. 5.1.1 Unable to connect to router wirelessly After setup wireless configuration, and input the wireless password correctly, save the settings. Normally, after you disconnect the Ethernet cable, wait for few minutes camera will show up again in Equipment Search Tool
(or show up in routers DHCP client list/LAN list) with a new IP address. That indicates your cameras connected wirelessly. If not, please follow below steps to help camera connect wirelessly. Step1: Please make sure wireless signal is strong enough to connect with.
(1) Make sure the camera antenna is fixed well;
(2) Best to keep the distance between the camera and router in 2~3 meters while setup;
(3) Theres no interference or obstacles from house appliance or walls;
Step2: Please check if your wireless password contains special characters. Remove special character in SSID and wireless password to have a try. Step 3: Reboot camera and router to have a check. If above are all confirmed, power off and on the camera and router may help camera to connect. Step 4: Please log-in the router and check if the MAC filter feature is enabled. Camera has wired and wireless MAC, they are different. If your router has wireless MAC filtering turned on, itll block camera to connect. Please turn it off, or add cameras MACs in the allow list. Step 5: Please change the wireless channel, and the wireless encryption of router to have a try. Change channel helps reduce influence from nearby WiFi networks, you can try 3,6,or 11 for example. As for encryption, suggest use WPA2/PSK AES. Step6: At last reset camera to default, and please try re-configure the wireless settings again. 5.1.2 Forgot cameras user name and password Camera can be hard reset to default settings, when you forgot cameras login user name and password. Below are the steps:
(1) Keep power on camera;
104
(2) Press and hold reset button of camera for 30 second, till it reboots. Reset button is on bottom, or back, or end cords of the camera.
(3) Once reset, camera will be restored to default settings. And default username / password will then become admin / random password on the MAC sticker. Please save your MAC sticker. 5.1.3 How to setup alarm recording to SD card For the cameras that support Micro SD card, we can save alarm recording on SD card and below are the steps to set it up:
Step 1: Setup the Motion Detection Settings Please go to Device Settings > Detector > Motion Detection menu.
(1) Click ON for the Detection swich.
(2) Choose Recording for the Action.
(3) Set the Detection Area
(4) Set a Schedule.
(5) Click Save to save the settings. 105 Note:
1) Please DO NOT forget to set the alarm schedule, the alarm schedule is red. 2) Please make sure your camera time is correct. 3) Please DO NOT forget to set the alarm area, the detected area is covered by the red grids. Or for some models you can setup 3 detection zones in total. Step 2: Setup the Storage Location Go to Device Settings > Record > Storage Location, and set the Recording Location to SD card and click Save. 106 Note:
SD card needs format correctly so itll be identified by camera, and has enough space for saving the recordings. Its suggested to use FAT32 for 4G~128G SD card. 5.1.4 How to setup alarm Emails Setup alarm Emails, when camera detects a motion itll send Email with snapshot to inform about the motion alarm. Steps as below. Step 1: Setup Mail Settings Before you set, please make sure that your email for sender enabled SMTP. And get your Email SMTP server, SMTP port, TLS information ready. Please go to Device Settings > Network > Mail menu to setup your email firstly. 107 Note:
(1) Please make sure that your sender email supports SMTP;
(2) Please click on Save before you click on Test;
(3) Make sure the test result is success.
(4) After succeed, you will receive a test email in the mailbox of Sender. Step 2: Setup the Motion Alarm Settings Please go to Device Settings > Detector > Motion Detection menu:
1. Click On, 2. Choose Send E-mail for the alarm action, 3. set your detection area, 4. Set your schedule. 108 Do not forget to click on Save after you finish settings. If there is motion trigger, camera will alarm and you can receive alarm emails. Note:
(1) Please DO NOT forget to set the alarm schedule, the alarm schedule is red.
(2) Please make sure your camera time is correct.
(3) Please DO NOT forget to set the alarm area, the detected area is covered by the red grids. Or for some models you can setup 3 detection zones in total. 5.1.5 Unable to connect camera remotely using Foscam app Foscam P2P cameras allow users to connect camera remotely using Foscam app without extract setup like port forwarding. When it unable to connect remotely, below tips can help app establish the connection:
(1) Update app and cameras firmware to latest version,
(2) Power off the camera then power back on,
(3) Delete camera from app then re-add it back, also lower cameras resolution. 5.1.6 Camera is added by others When use myfoscam.com cloud or Foscam app, one camera can only be added to one account at the same time. To solve error This camera has already been added by another account when add camera to Foscam app or cloud, please send a clear photo of cameras model sticker to Foscam support email support@foscam.com to unbind it. 109 More FAQs are available here:
https://www.foscam.com/faqs/index.html 5.2 Default Parameters Default network parameters IP address: obtain dynamically Subnet mask: obtain dynamically Gateway: obtain dynamically Username and password Default admin username: admin with a random password 5.3 Specification Sensor High Definition Color CMOS Sensor Image Sensor Display Resolution 4.0MegaPixels Lens Min. Illumination 0 Lux (With IR Illuminator) Lens Type Focal Length Aperture Glass Lens f: 2.8-12mm f: 2.8-12mm Angle of View Diagonal : 36~126 Video Stream Dual stream Image Compression Image Frame Rate H.264 20fps2K/11fps720P/, downward adjustable Resolution 4M(2560* 1440), 3M(2304*1296), 1080P(1920x1080),720P(1280 x 720), VGA(640 x 480), QVGA(320 x 240) Image Adjustment The hue, brightness, contrast, saturation, sharpness are adjustable Flip Image flip and mirror Infrared Mode Automatic and manual IR Range Ethernet 4pcs IR-LEDs, night vision range up to 20 metres One 10/100Mbps RJ45 port Remote Access P2P Network Data Rate IEEE802.11b: 11Mbps(Max.);
IEEE802.11g: 54Mbps(Max.);
IEEE802.11n: 150Mbps(Max.). IEEE802.11ac: 433Mbps(Max.) Wireless Standard Network Protocol 2.4G/5G dual band, IEEE802.11b/g/n/ac IPTCPUDPHTTPHTTPSSMTPFTPDHCP RTSPONVIF 110 System Requirements Operating System Microsoft Windows XP, 7, 8;Mac OS;iOSAndroid Browser Microsoft IE8 and above version or compatible browser;
Mozilla Firefox, Google Chrome, Apple Safari Motion Detection Alarm via E-Mail, upload alarm snapshot to FTP Sound Detection Supports sound detection User Accounts Three levels user role Other Features AI Firewall Firewall Storage Supports IP Filtering AI humen detection Supports IP Filtering Power Physical Micro SD card, FTP and local storage Intelligent Assistant Suppports Alexa, Google Assistant Reset Reset button is available Power Supply DC 12V / 2.0A Power Consumption 20 Watts (Max.) Dimension (L * W * H) Net Weight Operating Temperature 108mm * 108mm * 102mm /
4.25in * 4.25in * 4.02in 518g/ 1.41b
-20C ~ 50 (-4F ~ 122F) Environment Operating Humidity 20% ~ 85% non-condensing Storage Temperature
-20C ~ 50 (-4F ~ 122F) Certification Storage Humidity FCCCERoHSIP66 0% ~ 90% non-condensing 5.4 CE & FCC Electromagnetic Compatibility (EMC) FCC Statement FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the 111 user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CE Mark Warning This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. 5.5 WARRANTY FOSCAM values your business and always attempts to provide you the very best of service. No limited hardware warranty is provided by FOSCAM unless your FOSCAM product ("product") was purchased from an authorized distributor or authorized reseller. Distributors may sell products to resellers who then sell products to end users. No warranty service is provided unless the product is returned to an authorized return center in the region where the product was first shipped by FOSCAM or to the point-of-purchase, which may have regional specific warranty implications. If you purchase your FOSCAM product from online store, please contact the point-of-purchase and ask for return / replacement / repair service. Limited Hardware Warranty FOSCAM products are warranted to be free from manufacturing defects in materials and workmanship starting from the shipping date of FOSCAM. This limited hardware warranty does not cover:
Software, including the software added to the products through our factory-integration system, software,etc. Usage that is not in accordance with product instructions. Failure to follow the product instructions. Normal wear and tear. Return Procedures Please read FOSCAM warranty policy & policy of your reseller first before sending items back to point-of-purchase. Customer must first contact point-of-purchase to obtain a Return Merchandise Authorization (RMA) number before returning the product. If the product you received is suspected to be defective and the 112 product warranty has not expired, The RMA number will allow your reseller to track your return much easier and help them expedite processing your request. After receiving your RMA case number, pack the item(s) very well with the original box and all the original accessories included such as power adapters, brackets, cables, manuals. Write your RMA number and the return reason (the problem of the product) on the warranty card along with the complete package to send them back. Replacement Services If customers ask for replacement service, please contact point-of-purchase and follow their policy. Our technicians will inspect all items returned for replacement requests. If the retuned product is found in working order, we will return the same item received. However customers shall be responsible for all shipping & handling charges incurred for getting the units back to customers. If returned products are found defective, we will replace the product and assume the shipping cost for sending back the replacement unit to customers. If for any reason, we are unable to provide a replacement of the original returned item(s). You will have a choice for a "Substitute" item at the same equal value. We do not provide exchange and replacement due to normal hardware upgrade according the market after 14 days after the product is delivered. Our technicians will test the product before send out the replacement, any other demand for more than two times replacement for the same product during replacement limit will be rejected. Replaced products are warranted from the balance of the former warranty period. Warranty Forfeiture Warranty is void if purchase from unauthorized distributor or reseller. Warranty is void if trade-mark, serial tags, product stickers have been removed, altered or tampered with. Warranty is void for mishandling, improper use, or defacing the product. Warranty is void for physical damage, altered, either internally or externally, improper or inadequate packaging when returned for RMA purposes. Warranty is void if damage has resulted from accident, dismantle, abuse, or service or modification by someone other than the appointed vendor, souse, fission or the spare part has been over the period of warranty. Warranty is void if product is damaged due to improper working environment or operation. (For example, improper temperature, humidity, unusual physical or electrical stress or interference, failure or fluctuation of electrical power, static electricity, using wrong power adapter, etc.) Warranty is void if damaged by the use of parts not manufactured or sold by FOSCAM. Damage caused by improper installation of third-party products. Warranty is void if damaged for irresistible cause, such as earthquake, fire, lightning, flood, etc. Product beyond limited warranty. Shipping Fee If products are defective or damaged under normal use or operation in the replacement limit, distributors or resellers are responsible for the shipping cost the product back to customers, customers should assume the shipping cost send the product to the point-of-purchase. During replacement limit, if customers ask for replacement due to the product does not fit for customer's personal expectation, customers should responsible for both shipping fee. 113 Customers shall be responsible for both shipping fee if their product beyond the replacement limit but still in warranty limit. Repair Service Out Of Warranty FOSCAM provide extra repair service for product that out of warranty, it is chargeable. The total fee contains device cost and service fee. Device cost (including accessories) is the standard uniform price provide by FOSCAM. Different region may have different service fee, please contact the point-of-purchase to confirm that before Our technicians will quote the total price after detect the product, If customers refused to repair after the quotation, customers need pay for the test fee, $3.5 / hour. If agree with the quotation, test will be free. Repaired product out of warranty will obtains 3-month warranty from the date of the product back to you ask for this service. customers. Limitation of Liability FOSCAM is not responsible for other extra warranty or commitment promised by resellers, if your reseller promised some extra commitment or warranty; please ask for written documents to protect your rights and interests. FOSCAM does not offer refunds under any circumstances. Please contact the point-of-purchase and follow their refund / return policy. FOSCAM shall not be liable under any circumstances for any consequential, incidental, special or exemplary damages arising out of or in any connection with this agreement or the products, including but not limited to lost profits, or any claim based on indemnity or contribution, or the failure of any limited or exclusive remedy to achieve its essential purpose or otherwise. Purchaser's exclusive remedy, as against FOSCAM, shall be the repair or replacement of defective parts. If FOSCAM lists a product on its website specification in error or that is no longer available for any reason, FOSCAM reserves the right to explain it without incurring any liability. All rights reserved. FOSCAM and the FOSCAM logo are trademarks of ShenZhen FOSCAM Intelligent Technology Limited., registered in the U.S. and other countries. 5.6 Statement You are advised to be cautious in daily life, keep personal account information carefully, do not share personal account easily. Change passwords of your account and equipment periodically, and upgrade equipment firmware to strengthen security consciousness. Our company makes no warranty, implied or otherwise, that this product is suitable for any particular purpose or use. You need to abide by the relevant laws and regulations of the use restrictions when using Foscam cameras. Our company takes no responsibility of illegal activities by using our products. Our company takes no responsibility of the loss by force majeure, such as failure or faults of telecom system or the Internet network, computer viruses, malicious attacks of hackers, information damage or loss, and faults of computer system. Foscam company does not need to take any responsibility of the special, incidental or corresponding loss by 114 the products of our company or any software provide by our company, including but not limited to operating loss, profit or purpose. The company only takes the responsibility applicable to national and local legal requirements. Our company takes no responsibility of the loss caused by the following at ant time:
1) loss of purchases;
2) loss of intangible property damage, such as data, programs;
3) loss of compensation claimed by third-party customers. Delete images, format the memory card or other data storage devices does not completely remove the original image data. You can restore deleted files from discarded the storage device by commercial software, but which will potentially lead to personal image data used maliciously by others. The privacy of the data security belongs to user responsibility, the company takes no responsibility. Parts mentioned in this statement should not be understood by the configuration description of the product purchased by the customer, the product configuration must accord to the specific models purchased by the customer. Without the prior written permission of Foscam company, all the contents of relevant operating instructions manual affiliated to the product must not be reproduced, transmitted, transcribed or stored in a retrieval system, or translated into other languages. Our company will reserve the right to improve and modify the product and corresponding manuals. The company reserves the right of final interpretation on our products. 115 6 Obtaining Technical Support While we hope your experience with the IP camera network camera is enjoyable and easy to use, you may experience some issues or have questions that this User's Guide has not answered. If you have problem with FOSCAM IP camera, please first contact FOSCAM reseller for solving the problems. If our reseller cannot provide service, please contact our service department:
support@foscam.com CE Certificate statement Website: https://www.foscam.com/company/ce-certificate.html Exporter and Importer Information Opened to Public: https://www.foscam.com/company/open-information.html Manufacturer: Shenzhen Foscam Intelligent Technology Co., Ltd Addr: 9/F, Block F5, TCL International E City, No.1001 ZhongShanyuan Rd., NanShan District, Shenzhen, China, 518055 116
1 2 | Label and Label Location | ID Label/Location Info | 91.69 KiB | May 08 2020 |
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. LABEL AND LOCATION
(Size: L30mm x 25mm) Label Location _____________________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 1
1 2 | Agent Authorization | Cover Letter(s) | 18.56 KiB | May 08 2020 |
ShenZhen Foscam Intelligent Technology Co., Limited Agent Authorization Company: ShenZhen Foscam Intelligent Technology Co., Limited Address: 9/F, Block F5, TCL International E City, No.1001 ZhongShanyuan Rd., NanShan District, Shenzhen, China Product Name: QHD Wireless IP Camera Trade Mark: FOSCAM Model Numbers: D4Z, D4Z VX, MDS2040, MDS2040 VX, MDS2041, MDS2041VX, MDS2042 VX, MDS2043 VX, MDS2044VX, MDS2045 VX, Genie 3 VX, Foscam Genie 3 VX, D2*, D2* VX, D4* , D4* VX, PS4X** MDS4010, MDS4010VX, MDS4011 VX, MDS4012 VX, MDS4013VX, MDS4014 VX, MDS4015VX
(Notes: V indicates the software version, x = 0, 1, 2, 3, 4, 5, 6, 7, 8, 9. When x = 0, V0 is blank by default, and * indicates the small version is identified by letters.) FCC ID: ZDED4Z We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:
Date: 2020-05-06 Name:
David Tu Title:
Manager Company: ShenZhen Foscam Intelligent Technology Co., Limited
1 2 | Declaration Letter of Model Difference | Cover Letter(s) | 82.64 KiB | May 08 2020 |
ShenZhen Foscam Intelligent Technology Co., Limited Add: 9/F, Block F5, TCL International E City, No.1001 ZhongShanyuan Rd., NanShan District, Shenzhen, China Tel: +86 0755-26745668-8230 Fax: +86 0755-26745668 Date: 2020-05-06 Dear Sir/Madam, We, ShenZhen Foscam Intelligent Technology Co., Limited Hereby declares the following statement , PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for marketing purpose:
Product name: QHD Wireless IP Camera Models No.: D4Z, D4Z VX, MDS2040, MDS2040 VX, MDS2041, MDS2041VX, MDS2042 VX, MDS2043 VX, MDS2044VX, MDS2045 VX, Genie 3 VX, Foscam Genie 3 VX, D2*, D2* VX, D4* , D4* VX, PS4X** MDS4010, MDS4010VX, MDS4011 VX, MDS4012 VX, MDS4013VX, MDS4014 VX, MDS4015VX
(Notes: V indicates the software version, x = 0, 1, 2, 3, 4, 5, 6, 7, 8, 9. When x = 0, V0 is blank by default, and * indicates the small version is identified by letters.) Sincerely, Clients name / title : David Tu / Manager Contact information / address: 9/F, Block F5, TCL International E City, No.1001 ZhongShanyuan Rd., NanShan District, Shenzhen, China Tel: +86 0755-26745668-8230 Fax: +86 0755-26745668 E-Mail: dqe@foscam.com
1 2 | FCC Short & Long Term Confidentiality Request | Cover Letter(s) | 77.32 KiB | May 08 2020 |
ShenZhen Foscam Intelligent Technology Co., Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-05-06 Subject; Request for Confidentiality FCC ID: ZDED4Z To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Software Security Requirements For U-NII Devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);
External Photos Test Setup Photos Internal Photos User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:
Name: David Tu Title: Manager
1 2 | WIFI Channel 12 and 13 Declaration Letter | Cover Letter(s) | 289.08 KiB | May 08 2020 |
ShenZhen Foscam Intelligent Technology Co., Limited WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: ZDED4Z Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:
1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:
Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: David Tu / Manager Signature:
Phone: +86 0755-26745668-8230 Email: dqe@foscam.com Date: 2020-05-06 Page 1 of 1 Rev.2.0
1 2 | FCC Software Configuration Control Declaration Rev1.1 | Cover Letter(s) | 71.83 KiB | May 08 2020 |
ShenZhen Foscam Intelligent Technology Co., Limited FCC Software Configuration Control Declaration Date: 2020-05-06 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product Name: QHD Wireless IP Camera Model Numbers: D4Z, D4Z VX, MDS2040, MDS2040 VX, MDS2041, MDS2041VX, MDS2042 VX, MDS2043 VX, MDS2044VX, MDS2045 VX, Genie 3 VX, Foscam Genie 3 VX, D2*, D2* VX, D4* , D4* VX, PS4X** MDS4010, MDS4010VX, MDS4011 VX, MDS4012 VX, MDS4013VX, MDS4014 VX, MDS4015VX (Notes: V indicates the software version, x = 0, 1, 2, 3, 4, 5, 6, 7, 8, 9. When x = 0, V0 is blank by default, and * indicates the small version is identified by letters.) Regarding FCC Country Code Selection guidelines identified in KDB 594280 D01 Software Configuration Control v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: David Tu Title: Manager Signature of applicant Date: 2020-05-06 FCC Software Configuration Control Declaration Rev1.1
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-05-08 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2020-05-08
|
||||
1 2 | Applicant's complete, legal business name |
ShenZhen Foscam Intelligent Technology Co., Ltd.
|
||||
1 2 | FCC Registration Number (FRN) |
0022772438
|
||||
1 2 | Physical Address |
9/F, Block F5, TCL International E City, No.1001 ZhongShanyuan Rd., NanShan District
|
||||
1 2 |
9/F, Block F5, TCL International E City, No.1001
|
|||||
1 2 |
Shenzhen, N/A
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@micomlabs.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
ZDE
|
||||
1 2 | Equipment Product Code |
D4Z
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
D**** T********
|
||||
1 2 | Telephone Number |
0755-******** Extension:
|
||||
1 2 | Fax Number |
0755-********
|
||||
1 2 |
d******@foscam.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
ShenZhen Foscam Intelligent Technology Co., Limite
|
||||
1 2 | Physical Address |
China
|
||||
1 2 |
d******@foscam.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | QHD Wireless IP Camera | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is the maximum conducted output power. Device contains 20 and 40 MHz signal bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
1 2 | Power listed is the maximum conducted output power. Device contains 20,40 and 80 MHz signal bandwidth.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Shenzhen LCS Compliance Testing Laboratory Ltd.
|
||||
1 2 | Name |
G**** L********
|
||||
1 2 | Telephone Number |
0755-********
|
||||
1 2 | Fax Number |
0755-********
|
||||
1 2 |
g******@lcs-cert.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.0150000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 CC | 5180 | 5240 | 0.018 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 38 CC | 5745 | 5825 | 0.015 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC