app
s
|
Applicant Information
|
|
1 2
|
Effective |
2024-11-07
|
1 2
|
Applicant's complete, legal business name |
ShenZhen Foscam Intelligent Technology Co., Ltd.
|
1 2
|
FCC Registration Number (FRN) |
0022772438
|
1 2
|
Physical Address |
Room 902,Building 1B, Shenzhen International
|
1 2
|
Shenzhen, N/A 518055
|
1 2
|
China
|
|
app
s
|
TCB Information
|
1 2
|
TCB Application Email Address |
T******@timcoengr.com
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2
|
Grantee Code |
ZDE
|
1 2
|
Equipment Product Code |
VD4Z
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2
|
Name |
Y**** Q****
|
1 2
|
Telephone Number |
0755-********
|
1 2
|
Fax Number |
0755-********
|
1 2
|
E-mail |
d******@foscam.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/06/2025 |
1 2 | 05/07/2025 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 | DTS - Digital Transmission System |
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | QHD Wireless PTZ IP Camera |
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 | Modular Equipment Type | Does not apply |
1 2 | Purpose / Application is for | Original Equipment |
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 | Grant Comments | Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz bandwidth modes. |
1 2 | Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes. |
1 2 | Is there an equipment authorization waiver associated with this application? | No |
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2
|
Firm Name |
EMTEK (Dongguan) Co., Ltd.
|
1 2
|
Name |
S******** L******
|
1 2
|
Telephone Number |
886-0********
|
1 2
|
E-mail |
S******@emtek.com.cn
|
|