all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 3.36 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | RF Exposure Info | |||||||
1 | Test Setup Photos | |||||||
1 | Test Report |
1 | Users Manual | Users Manual | 3.36 MiB |
User Manual Model: FN3104W Version: V1.0 NVR User Manual Table of Contents Table of Contents.............................................................................................................................................. I Security Warning.............................................................................................................................................III Preface..............................................................................................................................................................IV Important Safety Instructions......................................................................................................................... V 1 Overview......................................................................................................................................................... 1 1.1 Product Introduction...........................................................................................................................1 1.2 Key Features.......................................................................................................................................1 1.3 Relevant Version................................................................................................................................ 3 1.4 Icons Description................................................................................................................................3 1.5 Common Operations..........................................................................................................................4 1.6 USB Mouse Operation...................................................................................................................... 5 2 GUI................................................................................................................................................................... 6 2.1 Login.....................................................................................................................................................6 2.2 Setup Wizard.......................................................................................................................................6 2.3 Shortcut Menu.....................................................................................................................................6 2.4 Menu.....................................................................................................................................................8 2.4.1 Adding Devices....................................................................................................................... 9 2.4.2 Playback.................................................................................................................................11 2.4.3 Schedule.................................................................................................................................14 2.4.4 Device Information................................................................................................................15 2.4.5 Settings...................................................................................................................................18 2.4.6 System....................................................................................................................................31 3 Web................................................................................................................................................................35 3.1 Instructions before Login.................................................................................................................35 3.2 Log In..................................................................................................................................................35 3.3 Live Video.......................................................................................................................................... 38 3.4 Parameter Configuration.................................................................................................................42 www.foscam.com I NVR User Manual 3.4.1 Adding Devices..................................................................................................................... 42 3.4.2 Schedule Record.................................................................................................................. 43 3.4.3 Alarm.......................................................................................................................................44 3.4.4 Device Information................................................................................................................48 3.4.5 Basic Settings........................................................................................................................51 3.4.6 System Management........................................................................................................... 60 3.5 Playback............................................................................................................................................ 65 4 Appendix....................................................................................................................................................... 68 4.1 HDD Capacity Calculation.............................................................................................................. 68 4.2 Common Operations........................................................................................................................69 4.3 Specifications....................................................................................................................................74 4.4 FAQ.....................................................................................................................................................78 4.5 Glossary.............................................................................................................................................80 4.6 CE & FCC.......................................................................................................................................... 81 4.7 WARRANTY......................................................................................................................................81 4.8 Statement.......................................................................................................................................... 85 4.9 Obtaining Technical Support..........................................................................................................86 www.foscam.com II NVR User Manual Security Warning Please change the password of your Foscam NVR APP account, NVR and cameras user name regularly, the password should be the combination of numbers, letters and special characters. Please keep the user name and password of your cameras, NVR and Foscam APP account safe. Please update your camera to the latest firmware every three months, which make you have better product experience and ensure the safety of your NVR and cameras. www.foscam.com III NVR User Manual Preface Welcome to use our product, Network Video Recorder (NVR) Kit. This document mainly focuses on the installation and configuration of NVR Kit application system. With high performance video, user-friendly GUI, and practical industrial designs. This series NVR Kit is suitable for civil applications such as homes, stores, internet cafes, and small businesses in addition to mainstream security and surveillance applications. Default Settings NVR / Camera: Default administrator&password is admin & (blank). Declaration The feature of product on this manual is just for reference. Please prevail in physical product. The manual provides multiple product models for reference. The specific operations are not listed one by one. Please follow the operations depending on the actual product. Because the actual environment may be discrepant, the actual values of some data may be different from the values provided in the manual. If there are any question or dispute, the final interpretation of prevails. If you do not follow the manual during operation, you will bear any loss caused thereof. www.foscam.com IV NVR User Manual Important Safety Instructions This chapter describes how to use the product properly so as to prevent danger and property loss. Be sure to follow the security instructions when operating this product. Installation Environment Ensure device is installed in the well-ventilated, dust-free environment. It is recommended to use a voltage stabilizer for supply of power. If the power supply was unmatched, the device might work abnormally or stop working. Check that the voltage of the extra power supply is the same with the NVR's requirement, and the ground connection is working properly. The distance between the NVR and other device or wall should be more than 6cm / 2.4in away to facilitate heat dissipation. Precautions Please keep the device horizontally and avoid inclination or inversion. Don't touch the power switch with wet hand or damp items to avoid shock. Do not splash liquid or metal filing on the NVR To avoid short-circuit fault or blaze. The NVR does not contain any storage device. Please install a hard disk or connect to storage device firstly. Otherwise, you cannot perform operations such as recording and playback. Please press power button to shut down the NVR instead cutting off the power directly to avoid to damaged the storage device. Do not take the device apart when it is operating (or connecting to power). www.foscam.com V NVR User Manual 1 Overview 1.1 Product Introduction The series of product is a NVR Kit. This advanced product series receives a high quality video stream that is transmitted digitally by the IP Camera (IPC). The product can perform live video preview, recording, playback, remote access, and backup simultaneously. 1.2 Key Features Network Monitoring You can access the NVR system remotely through the browser on a PC or access the NVR system locally by using the display or monitor. Multi-screen Preview Multi-screen preview indicates that several pages are displayed on the screen of the monitor based on the same scale. Recording The NVR supports recording and storing video files on a Hard Disk Drive (HDD). Stored videos files can be queried or played back through Web or local GUI. Recording can be classified into schedule recording, manual recording, and alarm recording from low priority to high priority. If recording of any two types is enabled at the same time, only the recording of a higher priority takes effect. Schedule Recording You can select the scheduled time segment to enable or disable recording. Manual Recording You can manual enable recording in the corresponding channel. Motion Detection Recording After the motion detection function is enabled and recording is selected, motion detection recording is enabled when motion detection is triggered in the detection time segment and detection area. Note www.foscam.com 1 NVR User Manual When NVR system time and IPC time are different, the NVR recording will based on the NVR system time. Playback You can play recording video files stored in the Hard disk. Recording includes schedule recording, manual recording, and alarm recording. Single-screen playback and four-screen synchronous playback are supported. When display mode is 1080P, it only supports the single-screen playback. Alarm Motion Detection Alarm You can configure motion detection information about the corresponding channel in the NVR system. When an object moves in the detection time segment and detection area, an alarm is triggered, the NVR system enables motion detection recording, sends pictures to your mailbox, and uploads pictures to your FTP server. IPC Management You can search for IPC devices in the LAN through the NVR and add IPC devices to the NVR channel. Through the NVR, you can also manage IPC devices. HDD Management When the HDD becomes exceptional (for example, HDD Loss, HDD Full, and HDD Error), the NVR buzzer sounds an alarm. When the HDD is full, you can select the cycle cover the earliest recording or stop recording. Other Functions Support the logging function. Support local GUI output and perform shortcut operations through the mouse. Three roles can access the NVR, which are respectively visitor, operator, and administrator. The rights of the three roles vary from low to high. www.foscam.com 2 NVR User Manual 1.3 Relevant Version Name Monitor Network Browser Recommended Configuration You are recommended to equip a 16:9 monitor with the resolution higher than 1280 * 720. 10/100M Ethernet or above. This product supports 32-bit IE8 or later versions and does not support 64-bit IE browsers. It also supports Apple Safari and Mozilla Firefox browsers. 1.4 Icons Description In the live view mode, there are icons at the right top of the full screen.
: The HDD is full, and the recording has been stopped.
: A HDD is not inserted into the NVR or the HDD connected to the NVR is abnormal. In the live view mode, there are icons at the right bottom of the screen for each channel,
: NVR is recording for the IPC.
: The alarm of the IPC is triggered. The icon at the right top of the windows: Exit current menu to upper level menu. www.foscam.com 3 NVR User Manual 1.5 Common Operations Starting Up the NVR Turn on the power switch on the rear panel. The Power indicator LED should turn green indicating that the device begins to start up. Note If the power LED indicator on the front panel is off, please check if the power supply is plugged into an electrical outlet and the power switch is turned on;
Shutting Down the NVR There are two proper ways to shut down the NVR in the GUI interface. After login, right-click the mouse, you can click Shutdown in the shortcut menu. Choose Menu > System in the Menu interface, then click Shutdown in the System interface. Then turn off the power switch on the rear panel, the power LED indicator on the front panel turns off. Reset You can reset the NVR device to restore the factory settings. You can choose any one of the following methods operate. Reset button: Press and hold it for 3 seconds to reset all parameters to factory defaults on the bottom of the NVR. Local GUI: Choose Menu > System in the Menu interface, then click Factory Reset in the System interface. Web GUI: Choose
(Parameter Configuration) > System Management > Factory Reset. The Factory Reset page is displayed. www.foscam.com 4 NVR User Manual 1.6 USB Mouse Operation Plug USB mouse into one of the USB interfaces on the rear panel of the NVR. The operation of the mouse on the local GUI is shown as below. Name Action Description Left-Click Single-Click Menu or window: select and enter. Double-Click Preview mode or Playback mode: Switch between single-screen and multi-screen. Click and Drag Time or Area box: Select the time or zone range. Right-Click Single-Click Live view: Show menu. Time bar: Drag time bar. Menu: Exit current menu to upper level menu. Note The Single-Click mentioned in this article is refer to the left mouse click. www.foscam.com 5 NVR User Manual 2 GUI You can visit the local NVR device via the display or monitor, and view or manage NVR system. NVR device is connected to the network,mouse,and mobile storage devices have been successfully installed. Make sure the video output device is connected successfully. 2.1 Login For the operation, please refer to the Quick Installation Guide. 2.2 Setup Wizard By default, the Setup Wizard starts once the NVR has loaded. The Setup Wizard can walk you through some important settings of the NVR. If you don't want to use the Setup Wizard at that moment, right click the mouse to quit. For the operation, please refer to the Quick Installation Guide. 2.3 Shortcut Menu After login, right-click the mouse, you will enter the shortcut menu. www.foscam.com 6 NVR User Manual One-Screen / Four-Screen Switch between different channels video. Note: The NVR Kit supports four channels. Menu Click Menu to enter the Menu interface, it includes Adding Devices, Playback, Schedule, Device Information, Settings and System. For details, please refer to 2.4 Menu. Color Settings Click Color Settings to choose a channel to alter the color, then adjust the parameters of hue, brightness, contrast, saturation and sharpness. Playback You can display the video of every a channel for playback. For details, please refer to 2.4.2 Playback. Manual Record Click Manual Record to set manual record for single channel or all channels.
[Enable Manual Record]
Check the Channel checkbox, Click OK button to take effect. www.foscam.com 7 NVR User Manual Right-click the mouse to back to the Live view interface. In the live view interface, there are icon at the right bottom of the screen for the channel.
[Disable Manual Record]
Uncheck the channel checkbox, Click OK button to take effect. Right-click the mouse to back to the Live view window. In the live view mode, The icon disappeared at the right bottom of the screen for the channel. Adding Devices You can add and connect the IP Camera, configure the connection of IP cameras, delete the connection of IP camera. For details, please refer to 2.4.1 Adding Devices. Shutdown Click Shutdown to enter the Shutdown page. You can log out, reboot or shut down the NVR system. 2.4 Menu Right-click in live view mode and select Menu from the Shortcut Menu, the Menu interface is displayed. www.foscam.com 8 NVR User Manual 2.4.1 Adding Devices Right-click in live view mode and select Adding Devices from the Shortcut Menu, or select Menu >
Adding Devices in the Menu interface. The Adding Devices interface is displayed. You can search and add the online IP cameras by following the operation. After adding IP cameras, the basic information of the camera lists in the IP Camera List, and you can configure the basic setting of the IP cameras. Note Before adding the IP Camera, make sure that the IP Camera supports FS or ONIVF protocol. And you have the user name, password and port number of the IP camera. www.foscam.com 9 NVR User Manual NVR will automatically detect all the online IP Cameras which they can connect to. You will need to know your IP Camera name and password to connect. Automatic Adding IP Camera If the camera connected camera which is equipmented in the package.You can automatically add the camera to your NVR. Check the Automatic adding IP camera checkbox. The NVR system will automatically synchronize its password with the Manually adding IP Camera. Manually Adding IP Cameras If the connected camera which is not the equipment in the package. You can manually add the camera to your NVR. 1Uncheck the Automatic Adding IP Camera checkbox. 2Click the Manually Add button to adding devices page. IPC 1 192.168.10.135 HT 88 0000beef0091 1.Select the IPC. Note:
3.Click Add button. 2. Input the User Name and Password of the IPC. Make sure that the IP address of the IP camera and NVR's in the same network segment, and the subnet mask and gateway are the same as the NVR's. www.foscam.com 10 NVR User Manual 3And the camera and its information will be added in the IP Camera list. Finally, click the Save button to take effect. 4Right-Click to return the previous interface. 2.4.2 Playback Right-click in live view mode and select Playback from the Shortcut Menu, or choose Menu >
Playback in the Menu interface. The Playback interface is displayed. It supports single-screen or four screens. www.foscam.com 11 NVR User Manual 1. Select a date with recording in calendar. 2. Select the Video Type, and check the checkbox from Channels.You can select up to four channels for playback at the same time. 3. Click Search button to search the matched recorded files. If there are search results, then they will be shown in the time bar area. 4. Click the icon to play the recording video. Manage the recording Button Description After searching file, click the button to play. Stop Fast backward. The fast backward speed can be 4 times, 8 times, 16 times or 32 times of the normal playing speed. Click this button. The multiple of normal www.foscam.com 12 NVR User Manual playing speed is displayed in the upper right corner of the playback page. For example, << X4 indicates the current fast backward speed is four times of the normal speed. Fast forward. The fast forward speed can be twice, 4 times, 8 times, 16 times or 32 times of the normal playing speed. Click this button. The multiple of normal playing speed is displayed in the upper right corner of the playback page. For example, >> X2 indicates the current playing speed is twice of the normal speed. Slow progress. The slow progress speed can be 1/2 times, 1/4 times, 1/8 times, 1/16 times or 1/32 times of the normal playing speed. Click this button. The multiple of normal playing speed is displayed in the upper right corner of the playback page. For example, >> X1/2 indicates the current playing speed is 1/2 times of the normal speed. Frame forward. View the image of each frame. Playback time and maximized video playback Button Description Zoom-in time axis. Zoom-out time axis. Left moving time axis. Right moving time axis. Return to the last playback progress bar. Make the playing video maximized. After the video is maximized, right-click to exit the currently maximized video. www.foscam.com 13 NVR User Manual 2.4.3 Schedule Choose Menu > Settings > Schedule in the Menu interface. The Schedule interface is displayed. You can enable or disable schedule record for the every channel.
[Enable Schedule Recording]
1Select channel from drop-down box list. 2Check the Enable checkbox to enable Schedule Recording function. 3Check the Select checkbox. Note: Check Clear checkbox and if you want to clear the area. 4Click and drag the mouse in the relative positions. The selected area is red. 5Click Save button to take effect for one certain channel. The icon channel. indicate starts schedule recording at the right bottom of the screen for certain
[Disable Schedule Recording]
1Select channel from drop-down box list. 2Uncheck the Enable checkbox to disable Schedule Recording function. 3Click Save button to take effect for one certain channel. www.foscam.com 14 NVR User Manual 2.4.4 Device Information Choose Menu > Device Information in the Menu interface. The Device Information interface is displayed. You can view the Firmware Version, Manage HDD Info and System Log. Firmware Version Choose Menu > Device Information > Firmware Version in the Menu interface. The Firmware Version interface is displayed. You can view the Device Type, Device Name, Firmware Version and Application Version. www.foscam.com 15 NVR User Manual HDD Info Choose Menu > Device Information > HDD Info in the Menu interface. The HDD Info interface is displayed. You can see, refresh, and format hard disk. Overwrite: When the HDD is full. You check the Overwrite checkbox, the NVR will cycle cover the earliest recording; If not, the NVR will stop recording when the HDD is full. Refresh: Click the Refresh button then you can update to the latest information on the hard disk. Format Hard Disk: If the disk is uninitialized, select the record disk, then click Format Hard Disk to format the record disk if the format is incorrect. www.foscam.com 16 NVR User Manual System Log Choose Menu > Device Information > System Log in the Menu interface. The System Log interface is displayed. The operation, alarm, exception and information of the NVR can be stored in log files, which can be viewed and exported at any time.
[Searching Log]
1Select the log type, channel and time. 2Click the Search button to list all matched logs. www.foscam.com 17 NVR User Manual 2.4.5 Settings Choose Menu > Settings in the Menu interface. The Settings interface is displayed. You can configure the General, Stream, network, display, Alarm Settings and OSD. General Choose Menu > Settings > General in the Menu interface. The General interface is displayed. You can configure the basic information of the NVR. www.foscam.com 18 NVR User Manual NOTE Please do not modify the NVR system time when recording. Parameter Device Name You can modify your device name to help you identify it. Description Language Configure the language of the NVR interface. Setup Wizard Whether to enable setup wizard when the NVR system starts again. Time Zone Please select the time zone according to the actual situation. Automatically synchronize with and Internet time server Whether synchronize your NVR with an Internet time server. Check: You need to configure the NTP Server. Uncheck: You need to configure the Date and Time. Date Format You need to configure the date format. Time Format You need to configure the time format. Daylight saving time Check the checkbox, then select the daylight saving time from the dropdown list. Synchronize time to camera Time set by the NVR system. Whether to synchronize the time to the connected IPC device. Click Save button to take effect. www.foscam.com 19 NVR User Manual Stream Choose Menu > Settings > Stream in the Menu interface. The Stream interface is displayed. You can configure the encoding scheme parameters of the IP Camera, the NVR system will synchronize your IP camera with encoding scheme. www.foscam.com 20 NVR User Manual Parameter Channel Stream Resolution Bit Rate Frame Rate Key Frame Interval Description You can select the channel for the IP Cameras. You can set the value of Resolution, Bit Rate, Frame Rate, Key Frame Interval when the video was set the main stream. The resolution of the IP Camera. The higher the resolution is,the sharper the video quality is, but also with the increasing stream, which will take up the higher bandwidth. Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should combine well with the network bandwidth. If the bandwidth is very narrow, and bit rate is large, that will lead to video can not play well. Note that a larger frame size takes up more bandwidth. When the video format is 50Hz, the maximum frame rate is 25 fps. When the video format is 60Hz, the maximum frame rate is 30 fps. You should choose a lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve fluently video. The time between last key frame and next key frame. The shorter the duration, the more likely you will get a better video quality, but at the cost of higher network bandwidth consumption. Click save button to take effect. Network Choose Menu > Settings > Network in the Menu interface. The Network interface is displayed.You can configure the information of Network, DDNS, E-Mail, FTP and Wireless.
[Network]
Select the Network page, you can configure the network information of the NVR. www.foscam.com 21 NVR User Manual Parameter Description You can select the network type from the drop-down list box. Type If select the DHCP, NVR system will automatically obtain an IP address and other network settings from that server. If select the Static IP, you can configure an IP address and other network settings. HTTP Port HTTPS Port The default value is 88. The default value is 443. IP Address You can configure the IP address of the NVR system. Note:
The IP of IP cameras, PC and NVR should be in the same network segment and in the same LAN. Subnet Mask The subnet mask of the NVR system. Gateway Preferred DNS Server Alternative DNS Server The gateway of the NVR system. The preferred DNS server of the NVR system. The alternative DNS server of the NVR system. www.foscam.com 22 NVR User Manual MAC Address You can use the UPnP function to enable the fast connection of the device to the WAN via a router without port mapping. Note:
If you want to enable the UPnP function of the NVR, you must enable the UPnP function of the router to which your NVR is connected. UPNP You can enable or disable the UPNP function. Click Save button to take effect. How to configure the IP Address, Subnet Mask, Gateway, Preferred DNS Server, alternative DNS Server, please refer to 4.2 Common Operations 2. Configure the IP Parameters.
[DDNS]
Select the DDNS page, you can configure the DDNS information of the NVR. The NVR has embedded a unique DDNS domain name when producing, and you can directly use the domain name, you can also use the third party domain name. Note Here take a6747.myfoscam.org for example. Enable DDNS:Check the DDNS checkbox to enable this feature. Click Save button to take effect. Then you can use http:// Domain name + HTTP Port to access the NVR via internet. Take hostname a6747.myfoscam.org and HTTP Port. 88 for example, the accessing link of the camera via internet would be http://a6747.myfoscam.org:88 www.foscam.com 23 NVR User Manual Third Party DDNS:You can also use third part DDNS, such as www.no-ip.com, www. 3322.com. If you set the third party DDNS, refer to 4.2 Common Operations 1.Third Party Domain Name Settings.
[EMail]
Select the EMail page, you can configure the E-mail information of the NVR. The system can be configured to send an email to the designated users if an alarm or motion event is detected etc.. Before configuring the Email settings, the NVR must be connected to a local area network (LAN) that maintains an SMTP mail server. Parameter Enable E-Mail Description Check the checkbox to enable the Eamil function. Authentication Whether to verify the user name and password during login to the mailbox. SMTP Server The SMTP Server IP address or host name. SMTP Port The SMTP port is usually set as 25. Some SMTP servers have their own port, such as 587 or 465. Enable SSH www.foscam.com Transport Layer Security usually is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be set to 465 or 25 or 587, which port you choose 24 NVR User Manual SMTP User name should be decided by which Transport Layer Security you select. The user account of sender's Email for SMTP server authentication. SMTP Password The password of sender's Email for SMTP server authentication. Sender Recipient Address The Email address of sender. The Email address of user to be notified. you can set 4 receivers Click Save button to take effect. Click E-Mail Test to see if Mail has been successfully configured. If the test success, you can see the success information, at the same time the receivers will receive a test mail.
[FTP]
Select the FTP page, you can configure the FTP information of the NVR. The system can be configured to send an picture to the FTP server if an alarm or motion event is detected etc.. www.foscam.com 25 NVR User Manual Parameter FTP Address Description If your FTP server is located on the LAN, you can set FTP address as ftp://IP address/dir.(eg.ftp://192.168.1.103/dir). If your FTP server is located on the WAN, you can set FTP address as ftp://domain name/dir.(eg.ftp:test.no-ip.org/dir). FTP Port Default port is 21.You can also change this port manually through FTP server. FTP Mode Here supports two modes: PORT and PASV. FTP Username The user account of FTP server. FTP Password The user password of FTP server. Click Save button to take effect. Click FTP Test to see if FTP has been successfully configured. If the test success, you can see the success information.
[Wireless]
Select the Wireless page, you can configure the wireless information of the NVR. Select Automatic Channel Optimization, NVR will choose the channel automatic. Or you can select the channel from the dropdown list. Don't tick Automatic channel optimization when you want to select the channel manually. www.foscam.com 26 NVR User Manual Display Choose Menu > Settings > Display in the Menu interface. The Display interface is displayed.You can configure the Resolution, Transparency, and Mouse Sensitivity for the NVR. Parameter Resolution Description The output resolution of the NVR. Transparency Configure the transparency of the NVR output interface. Mouse Sensitivity Configure the sensitivity of the mouse. Alarm Settings
[Motion Detection]
Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event takes place, the NVR can analyze it and perform many actions to handle it. Enable motion detection function can trigger certain channels to start recording, or trigger full screen monitoring, output alarm, send Email, upload figure to FTP, buzzer alarm and so on. In the live view mode, there are icons at the right bottom of the screen for each channel. The Icon indicate alarm was triggered. www.foscam.com 27 NVR User Manual The Icon indicate the IPC is recording. In this chapter, you can follow the steps to schedule a record which triggered by the detected motion. Choose Menu > Settings > Alarm Settings > Motion Detection in the Menu interface. The Motion Detection interface is displayed. Step1 Step2 Step3 Select channel from drop-down box list. Check the checkbox to enable motion detection function. Check the checkbox to select the linkage method. You may refer to follow table for details of linkage methods. www.foscam.com 28 NVR User Manual Parameter Record Description If you select this checkbox, when the Motion detection is triggered, the NVR will record automatically and store the record files to the HDD. IPC Audio Warning If you select this checkbox, when the Motion detection is triggered,the people around the camera will hear beep alarm sound of the IPC. Buzzer Send E-Mail FTP When the Motion detection is triggered, you can choose whether to enable buzzing sound of the NVR device. When the Motion detection is triggered, you can choose whether to send e-mail. Note: Make sure you have set Email. When the Motion detection is triggered, you can choose whether to upload detection picture to FTP server. Note: Make sure you have set FTP. Step4 Set Detection Area. 1Click Area Setting button and it pop up a window. 2Drag and draw the area for motion detection by left mouse. 3Right-click with your mouse to save and quit. When something moving in the detection area, the NVR will alarm. Step5 Set Detection Schedule. 1Click Settings button for the detection schedule. Set up arming schedule of the channel for the motion detection. You can choose a week, one day of a week, the certain time period for the motion detection alarm. 2Check Select checkbox to select the area. 3Drag and draw the area for motion detection by left mouse. Note:Check Clear checkbox and If you clear the area, then drag and draw the area for motion detection by mouse. 4Click the OK button to save and exit the window. www.foscam.com 29 NVR User Manual Step6 Select the Sensitivity from the drop-down box list. And then you can enable the detection area. You can drag the time bar to select the detection interval and record time. Parameter Sensitivity Detection Interval Record
(Time Second) Description The higher the sensitivity, the NVR will be more easily alarmed. The Triggered Interval time between two motion detection. The unit is second. When you check the Record, you need to configure motion detection recording time. The unit is second. Step7 Click Save button to take effect. When the motion has been detected during the detection time in the detection area, the NVR will alarm and adopt the corresponding alarm linkage. Note: You must set the detection area and detection schedule, or else there is no alarm anywhere and anytime.
-------End
[Other Alarm]
Choose Menu > Settings > Alarm > Other Alarm in the Menu interface. The Other Alarm interface is displayed. Click Save button to take effect. www.foscam.com 30 NVR User Manual OSD Choose Menu > Settings > OSD in the Menu interface. The OSD interface is displayed. You can configure the OSD (On Screen Display) information. Parameter Channel Description Select the channel from the drop-down list. Channel Name It displays the IPC device name of the corresponding channel. Display Channel Name Whether to display the IPC device name on the selected channel. Display Time Whether to display the IPC device time on the selected channel. 2.4.6 System Choose Menu > System in the Menu interface. The System interface is displayed. You can manage the NVR device about User Account, Upgrade, Factory Reset, Para Export, Auto Restore, Log Out, Reboot, Shutdown. www.foscam.com 31 NVR User Manual User Account Choose Menu > System > User Account in the Menu interface. The User account management interface is displayed. User levels by permission from low to high are visitor, operator, administrator. Different user levels have different operating permission.The default user name of device administrator is admin with no password. The administrator has the permission to add and delete all users and configure user parameters. You can add, modify, delete user name / password or distribute authority for users. The valid value range of User name and Password is 1 ~ 20 characters, it contains the English letter, numeric and symbol. www.foscam.com 32 NVR User Manual After configure the user name, password and competence, you need to check Enable checkbox. Then click Save button to take effect. Upgrade Choose Menu > System in the Menu interface. You can check for updates by network.
[Remote Upgrade]
Click the Remote Upgrade button, the system will check the software version. If your software is not latest, you can upgrade it by remote upgrading. NOTE:
Don't shut down the power during upgrade. After upgrading, you can see the upgrade result. Factory Reset Choose Menu > System in the Menu interface, then click Factory Reset in the System interface. Click OK button in the pop-up message box and all parameters will return to factory settings. Click OK button and then the NVR device will reboot automatically. Para Export Choose Menu > System in the Menu interface, then click Para Export in the System interface. Click the button to import or export the parameter. Auto Restore Choose Menu > System > Auto Restore in the Menu interface. The Auto Restore interface is displayed. You can configure the Date and Time. The NVR will maintain system at the setting time. Log Out After logging out, the monitor turns to the live view mode and if you want to do some operation, you need to input user name and password tog in again. Choose Menu > System in the Menu interface, then click Log Out in the System interface. Click OK button in the pop-up message box, the NVR system will log out. Note: After you have logged out the system, menu operation on the screen is invalid. It is required to input a user name and password to unlock the system. www.foscam.com 33 NVR User Manual Reboot Choose Menu > System in the Menu interface, then click Reboot in the System interface. Click OK button in the pop-up message box, the NVR system will reboot. Shutdown Choose Menu > System in the Menu interface, then click Shutdown in the System interface. Click OK button in the pop-up message box, the NVR system will shut down. It is recommended that cut off the power after shutting down. www.foscam.com 34 NVR User Manual 3 Web You can access and manage the NVR on a PC through Web browser. 3.1 Instructions before Login Before accessing the NVR Kit by using the Web browser, you need to obtain the following information:
The NVR and the PC must be connected to the same LAN and are in the same network segment. You can query or allocate the IP address of the NVR by using the following methods:
Through operation on the local GUI, configure an IP address for the NVR. For the specific operation, please refer to 4.2 Common Operations 2. Configure the IP Parameters. Allocate an IP address for the NVR through a router. This product supports 32-bit IE8 or later versions and does not support 64-bit IE browsers. It also supports Apple Safari and Mozilla Firefox browsers. 3.2 Log In Step1 Step2 Log in to the Web client of the NVR. You can directly enter the IP address and port in the browser or search out the NVR by using the search tool. Here we take search tool as an example. Find the folder "Equipment Search Tool" in the CD, then go to the the folder "For windows OS"
or "For Mac OS". Copy and paste the search tool file to your computer, or drag it onto your desktop. Step3 Enable the DHCP feature of your router, then open the Equipment Search Tool program. It should display the NVR's IP address in your LAN. www.foscam.com 35 NVR User Manual Step4 Double-click the NVR, and your default browser will open up to the NVR's login page. When logging in for the first time, you will need to install the add-on. It will pop up the message below the page, as shown in the following figure. Click Install button to install the add-on. Please follow the installation instructions. (Please close the browser during installation.) Step5 After installing the add-on, refresh the browser and enter the login interface. Input the follow parameter. www.foscam.com 36 NVR User Manual Parameter User name /
Password Language Description The user name and password of the NVR client. The default administrator user name is admin with a blank password, please set the new user name or password at first using and prevent unauthorized users login the NVR. Select the language type of the NVR client. Click Login button. Step6 When you log in for the first time, it will come to the operating of modify the user name and password automatically. Enter the New User name, New password and Confirm the password.
-------End www.foscam.com 37 NVR User Manual 3.3 Live Video After log in, the live view interface will display. You can configure the play / stop the live view, manual recording, manual capturing, preset, cruise, led, color and so on. 1 2 3 4 www.foscam.com 38 NVR User Manual Section Icon 1 2 3 4 Name Live Video Parameter Configuration Playback Logout Channels Play Stop IR LED Description Click this button and back to the realtime preview window. There are Adding Devices, Schedule Record, Alarm, Device Information, Basic Settings, System Management in the Parameter Configuration interface. Playback the recorded video files of a specific channel in the live view mode. Disconnect the link between the client page of the current browser and the NVR server. In channels of the NVR, you can add IPC devices. The blue indicates that the channel is previewing state. You can see the video of the connected camera. The gray indicates that the channel is off line state. There was not the connected camera in this channel. Play an IPC monitoring video in a channel of the NVR. By default, the video is played. Stop playing the monitoring video in the channel. You can configure the LED of the IP Camera. There are two modes: Manual and Auto. Color You can configure the color of the IP Camera. Play all Play monitoring videos in all channels. All off Close monitoring videos in all channels. 1 Channel Click this button, It will display one channel in the live view interface. www.foscam.com 39 NVR User Manual 4 Channels Take Snapshot Record Click this button, It will display four channels in the live view interface. Select the channel, click this button, and you can take a snapshot of the monitoring video page of a corresponding channel to the local computer. You can set the storage path, refer to the Web >
Parameter configuration > Basic Settings >
Storage Location. Click this button to manually record the content on the monitoring page. The recorded content is stored in the HDD of the NVR. Audio Click this button to play the recording sound. Full Screen Click this button or double-click the monitoring page to make the monitoring page displayed in full screen. Press Esc to exit full screen mode. When the IPC which you add to the NVR has PT function, you can set the cruise and preset for the PZ IPC through Preset. Setting Cruise The default cruise tracks have two types: Vertical and Horizontal. www.foscam.com 40 NVR User Manual Vertical: The IP camera will rotate from up to down. Horizontal: The IP camera will rotate from left to right.
: Start cruise.
: Stop cruise. If you want to define or change the cruise trace, please go to Parameter Configuration > Service configuration > Preset Settings.
[How to do cruise?]
Step1 Select one track in the track drop-down list. Step2 Click
, the IP camera will cruise following the predefined path. Step3 Click and finish cruising. Preset Settings The default preset position is TopMost, BottomMost, LeftMost, RightMost, you can add other preset positions. Add: Click this icon to save the position you need the IP camera to remember. Delete: Select one preset position and click this button to delete it. GO: Select one preset position in the preset drop-down list and click Go to make the IP camera move the preset position.
[How to do preset position?]
Step1 Rotate the IP camera and stop at a desired place where you want make preset position. Step2 click button and input a descriptive name for the preset position. The preset position cannot contain special characters. Then click to save it. If you want to reset the preset position, click
. You can move the IP camera and stop at another place, and set another preset position. You can do all the preset positions with this method. www.foscam.com 41 NVR User Manual Step3 If you want to see one preset position you have set, only select the preset position name from the preset drop-down list, and click button, the IP camera will go to the preset position. 3.4 Parameter Configuration Choose information, basic settings and system management.
(Parameter Configuration), you can adding devices, schedule record, alarm, device 3.4.1 Adding Devices NVR provide a function of auto searching IP camera. When there are supplied IP cameras in the same network segment of a LAN with NVR, you may add it in one button with IP Camera's user name, password and port number. Choose displayed.
(Parameter Configuration) > Adding Device. The IP Camera Setup page is
[Auto Adding IPC]
Check the Automatically search for and add all devices checkbox if the connected cameras which are the equipments in the package. And make sure you can view all connected cameras are in The Current LAN IPC List box. The NVR system will automatically synchronize its password with the cameras. Then you can see the videos of the cameras on the Realtime Preview of the NVR.
[Manually Adding IPC]
www.foscam.com 42 NVR User Manual If the connected cameras which are not the equipment in the package, you can uncheck the Automatically search for and add all devices checkbox to manually add the other cameras. After select any one of the channels, input information of the IPC. Then click Add button to finish adding. Select one channel from Channels. Choose the IP Camera in the list of 'The Current LAN IPC List' . Choose the Protocol from the drop list. Input the User Name and Password of the IPC. Select the FOSCAM protocol for Foscam brand IPC, and select the ONVIF protocol for other brands IPC. Click Add button to finish adding. Step1 Step2 Step3
-------End 3.4.2 Schedule Record You can enable or disable schedule recording for the every channel. Set the recording schedule, and then the NVR automatically starts / stops recording according to the configured schedule. The recording files will be save to the HDD or mobile store device. The Icon channel. indicate starts schedule recording at the right bottom of the screen for certain Step1 Choose displayed.
(Parameter Configuration) > Schedule Record. The Schedule page is Step2 Select channel from drop-down box list. www.foscam.com 43 NVR User Manual Enable the Enable schedule record. Set Recording schedule time of the channel. You can choose a week, one day of a week, the certain time period for the recording. For detailed procedure, please refer to 3.4.3 Alarm Motion Detection. Click Save button to take effect. Step3 Step4 Step5
-------End 3.4.3 Alarm Motion Detection Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event takes place, the NVR can analyze it and perform many actions to handle it. Enable motion detection function can trigger certain channels to start recording, or trigger full screen monitoring, output alarm, send Email, upload FTP, buzzer alarm and so on. In the live view mode, there are icons at the right bottom of the screen for each channel. The Icon indicate alarm was triggered. The Icon indicate the IPC is recording. You can follow the steps to schedule a record which triggered by the detected motion. Choose page is displayed.
(Parameter Configuration) > Alarm > Motion Detection. The Motion Detection www.foscam.com 44 NVR User Manual Step1 Step2 Step3 Step4 Select channel from drop-down box list. Check the Enable checkbox to enable motion detection function. Select the Sensitivity and Detection Interval. The higher the sensitivity, the NVR will be more easily alarmed. The Detection Interval time between two motion detection. Check the checkbox to select the linkage method. You may refer to follow table for details of linkage methods. Parameter Send E-Mail Description When the Motion detection is triggered, you can choose whether to send e-mail. Note: Make sure you have set Email. When the Motion detection is triggered, you can choose whether to upload detection picture to FTP server. Note: Make sure you have set FTP. If you select this checkbox, when the Motion Detection is triggered, the NVR will record automatically and store the record files to the HDD. FTP Record Record Time When you check the Record, you need to configure motion detection recording time. Buzzer IPC Buzz When the Motion detection is triggered, you can choose whether to enable buzzing sound of the NVR device. If you select this checkbox, when the Motion Detection is triggered, the people around the camera will hear beep alarm sound of the IPC. Step5 Set Detection Area 1Click Set Detection Area button and it pop up a window. www.foscam.com 45 NVR User Manual 2Drag and draw the area for motion detection by left mouse. Note:To clear the motion detection area, drag and draw the motion detection area by left mouse. 3Click OK button to save and quit. When something moving in the detection area, the NVR will alarm. Step6 Set Detection Schedule Set up arming schedule of the channel for the motion detection. You can choose a week, one day of a week, the certain time period for the motion detection alarm. Choose all Time Period Click the black button up the MON, you will see all time range turn red. When something moving in the detection area at anytime, the NVR will alarm. Click here Choose one day Click the week day words, the corresponding row will be selected. www.foscam.com 46 NVR User Manual For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, when something moving in the detection area, the camera will alarm. Click here Choose the Certain Time Period Press the left mouse and drag it on the time boxes, you can select the serial area. Step7 Click Save button to take effect. When the motion has been detected during the detection time in the detection area, the NVR will alarm and adopt the corresponding alarm linkage. Note: You must set the detection area and detection schedule, or else there is no alarm anywhere and anytime.
-------End Other Alarm Step1 Choose is displayed.
(Parameter Configuration) > Alarm > Other Alarm, The Other Alarm page www.foscam.com 47 NVR User Manual Step2 Step3 Step4 Select Type form drop-down box list. Check the Buzzer checkbox if you want to enable buzzing sound of the NVR device. Click Save button to take effect.
-------End 3.4.4 Device Information Firmware Version You can view the NVR system information, or modify the Device Name. Choose Firmware Version page is displayed.
(Parameter Configuration) > Device Information > Firmware Version. The www.foscam.com 48 NVR User Manual Description The product type of NVR. The device name is a unique name that you can give to your device to help you identify it. You can change your NVR name. Display the system version of your NVR. Display the application firmware version of your NVR. Display the plug-in version of your NVR. Parameter Device Type Device Name System Firmware Version Application Firmware Version Plug-in version Click Save button to take effect. Hard Disk Information You can configure the Disk Saturation, Pre-record Time for HDD information. Step1 Choose The Hard Disk Information page is displayed.
(Parameter Configuration) > Device Information > Hard Disk Information. You can configure the following settings. Step2 Format Hard Disk: Click the Format Hard Disk button to initialize the SATA disk for recording. Note: Initializing the HDD will erase all the data saved on it, please backup the data before formatting hard disk if necessary. www.foscam.com 49 NVR User Manual Disk Saturation:When the disk is saturated, you can choose to stop recording or cycle coverage. Pre-record Time:The time you set to record before the event. For example, when an alarm triggered the recording at 11:00, if you set the pre-record time as 5 seconds, the camera records it at 10:59:55. Click Save button to take effect. Step3
-------End System Log Choose page is displayed.
(Parameter Configuration) > Device Information > System Log. The System Log The operation, alarm, exception and information of the NVR can be stored in log files, which can be searched and viewed at any time. The Log Type contains Alarm log, System log and Operation log.
[Search Log]
1Select the Channel, Log Type, Date, Start time and End time. 2Click the Search button to list all matched logs. www.foscam.com 50 NVR User Manual 3.4.5 Basic Settings System Time You can configure the date and time of the NVR. Step1 Step2
(Parameter Configuration) > Basic Settings > System Time. The System Choose Time page is displayed. Configure the system time of the NVR. Step3 Step4 Step5 Select the Time Zone from the drop-down list. If you check the Synchronize Time To Camera checkbox, the default settings of the NVR for the IP camera is applied to the added camera. Configure the system date and time. If you check the Automatically Synchronize With Internet Time Server checkbox, a Network Time Protocol (NTP) Server can be configured on your NVR to ensure the accuracy of system date / time. Choose the one that is closest to your NVR. If you uncheck the Automatically Synchronize With Internet Time Server checkbox, configure the following NTP settings. Parameter System Time Description There are two different ways for the date format to synchronize the date and time of the NVR. input the date and time manually. Click Sync with PC button to synchronize the date and time of the NVR system with your computer. www.foscam.com 51 NVR User Manual Date Format Time Format Select the date format from the drop-down list. Select the time format from the drop-down list. Click Save button to take effect. Step6
-------End Network You can configure the network information of the NVR. Step1 Choose is displayed.
(Parameter Configuration) > Basic Settings > Network.The Network page www.foscam.com 52 NVR User Manual Step2 Configure the network parameter. Parameter Network Type Description You can select the network type from the drop-down list box. If select the DHCP, the NVR system will automatically obtain an IP HTTP Port HTTPS Port IP Address Subnet Mask Gateway Primary DNS Server Alternative DNS Server UPNP address and other network settings from that server. If select the Static IP, you can configure an IP address and other network settings. The default value is 88. The default value is 443. You can configure the IP address of the NVR system. Note:
The IP of IP cameras, PC and NVR should be in the same network segment and in the same LAN. The subnet mask of the NVR system. The gateway of the NVR system. The primary DNS server of the NVR system. The secondary DNS server of the NVR system. You can use the UPnP function to enable the fast connection of the device to the WAN via a router without port mapping. Note:
If you want to enable the UPnP function of the NVR, you must enable the UPnP function of the router to which your NVR is connected. How to configure the IP Address, Subnet Mask, Gateway, Preferred DNS Server, Alternative DNS Server, please refer to 4.2 Common Operations > 2. Configure the IP Parameters. Click Save button to take effect. Step3
-------End www.foscam.com 53 NVR User Manual Channel Selection The default selection is Automatic channel optimization, NVR chooses the channel automatic. Or you can select the channel from the dropdown list. Don't tick Automatic channel optimization when you want to select the channel manually. Note: Make sure that the radio channel meets local laws and regulations.
-------End Email The system can be configured to send an email to the designated users if an alarm or motion event is detected etc.. Before you configure the Email settings, the NVR must be connected to a local area network (LAN) that maintains an SMTP mail server. The network must also be connected to either an intranet or the Internet depending on the location of the e-mail accounts to which you want to send notification. Step1 Choose displayed.
(Parameter Configuration) > Basic Settings > Email. The Email page is www.foscam.com 54 NVR User Manual Step2 Configure the Email parameter. Parameter Enable E-Mail Description Enable or Disable the Email function. SMTP Server The SMTP Server IP address or host name. SMTP Port The SMTP port is usually set as 25. Some SMTP servers have their own port, such as 587 or 465. Transport Layer Security Transport Layer Security usually is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be set to 465 or 25 or 587, which port you choose should be decided by which Transport Layer Security you select. SMTP Username The user account of sender's Email for SMTP server authentication. SMTP Password The password of sender's Email for SMTP server authentication. Sender The Email address of sender. Receivers Address1/2/3/4 The Email address of user to be notified. you can set 4 receivers Step3 Step4 Click Save button to take effect. Click Test to see if Mail has been successfully configured. www.foscam.com 55 NVR User Manual If the test success, you can see the success information, at the same time the receivers will receive a test mail.
-------End FTP Settings The system can be configured to send an picture to the FTP server if an alarm or motion event is detected etc.. Step1 Choose Settings page is displayed.
(Parameter Configuration) > Basic Settings > FTP Settings. The FTP Step2 Configure the FTP parameter. Parameter Description If your FTP server is located on the LAN, you can set FTP address as FTP Address ftp://IP address.(eg.ftp://192.168.1.103/dir). If your FTP server is located on the WAN, you can set FTP address as ftp://domain name/dir.(eg.ftp://test.no-ip.org/dir). FTP Port Default port is 21. If changed, external FTP client program must change the server connection port accordingly. FTP Mode Here supports two modes: PORT and PASV. FTP Username The user account of FTP server. FTP Password The user password of FTP server. Step3 Click Save button to take effect. www.foscam.com 56 NVR User Manual Click Test to see if FTP has been successfully configured. Step4 If the test success, you can see the success information.
-------End DDNS The Foscam NVR has embedded a unique DDNS domain name when producing, and you can directly use the domain name, you can also use the third party domain name. Choose displayed.
(Parameter Configuration) > Basic Settings > DDNS. The DDNS page is Note Here take test.myfoscam.org for example. Enable DDNS:Check the DDNS checkbox to enable this feature. Click Save button to take effect. Then you can use http:// Domain name + HTTP Port to access the NVR via internet. Third Party DDNS:You can also use third part DDNS, such as www.no-ip.com, www. 3322.com. If you set the third party DDNS, refer to the 4.2 Common Operations 1.Third Party Domain Name Settings. OSD You can configure the OSD (On screen Display) information of the NVR. Step1 Choose displayed.
(Parameter Configuration) > Basic Settings > OSD,The OSD page is www.foscam.com 57 NVR User Manual Step2 You can configure the follow parameters. Parameter Channel Description You can select one channel from drop-down box list.. You can modify the IP Camera's name. Channel name After you modify the name and save the modification, the NVR system synchronizes the channel name to the corresponding IPC device name. The channel name will be shown on the top left of the video image. Display Channel Name There are two options: Yes or No. Select Yes and you can see the IP camera's name on the video Display Time There are two options: Yes or NO. Select Yes and you can see the system date on the channel video. You can configure the privacy zone settings for the camera. Check the Enable Privacy checkbox and it pop up a window. If the IPC device type is MJ or IPC protocol type is ONVIF, the feature is invalid. You can use the mouse to click and drag the text frame on the live view window to adjust the OSD position. Click Save button to finish the mask area setting. The mask area will be marked with black. Step3 Step4 Step5
-------End Video Encode Choose page is displayed.
(Parameter Configuration) > Basic Settings > Video Encode. The Video Encode www.foscam.com 58 NVR User Manual You can configure the encoding scheme parameters of the IP Camera, the NVR system will synchronize your IP camera with encoding scheme. Parameter Channel Description You can select the channel for the IP Cameras. Stream You can set the value of Resolution, Bit Rate, Frame Rate, Key Frame Interval when the video was set the main stream. Resolution Bit Rate Frame Rate The resolution of the IP Camera. The higher the resolution is,the sharper the video quality is, but also with the increasing stream, which will take up the higher bandwidth. Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should combine well with the network bandwidth. If the bandwidth is very narrow, and bit rate is large, that will lead to video can not play well. Note that a larger frame size takes up more bandwidth. When the video format is 50Hz, the maximum frame rate is 25 fps. When the video format is 60Hz, the maximum frame rate is 30 fps. You should choose a lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve fluently video. Click save button to take effect. Storage Location You can configure the storage location for snap picture and backup record file. www.foscam.com 59 NVR User Manual Choose Location page is displayed.
(Parameter Configuration) > Basic Settings > Storage Location. The Storage Snapshot Pictures To: Click the icon
(Take Snapshot) in the Real time Preview page or Playback page, the snapshot picture will be saved to the Snap Picture Path in the local computer. Smart Record You can enable or disable Smart Record on this page. When enable Smart Record, NVR can reduce the frame rate automatically to store more recording. 3.4.6 System Management User Account User levels by permission from low to high are visitor, operator, administrator. Different user levels have different operating permission.The default user name of device administrator is admin with no password. The administrator has the permission to add and delete all users and configure user parameters. You can add, modify, delete username / password or distribute authority for users. The valid value range of Username and Password is 1 ~ 20 characters, it contains the English letter, numeric and symbol. Choose
(Parameter Configuration) > System Management > User Account. The User www.foscam.com 60 NVR User Manual Accounts page is displayed.
[Add a User]
1input the Username and Password. 2Select the user level from the Competence. 3Check the Enable checkbox. 4Click Save button to save the settings and the added new user will be displayed on the list.
[Changing Password of Admin]
1In the Password text field, delete the old password, input the new password. 2Click Save button to take effect. Import / Export Configurations You can import or export a configuration file for NVR system. Choose Configuration. The Import / Export Configurations page is displayed.
(Parameter Configuration) > System Management > Import / Export www.foscam.com 61 NVR User Manual Backup Configurations: Backup is used to save your current settings. It is recommended to backup your configuration before modifying or upgrading firmware. Click Backup button and the configuration files of the NVR will be exported for backup. The name of the configuration file name is config.bin. Import: Click Browse..., select the config.bin file from the USB-flash disk and click the Import button. The loading process takes about 50 seconds, After having finished the import of configuration files, the NVR device will reboot automatically. Note Do not disturb the update process by turning off the power. All current settings will be overwritten when importing a configuration file. If a bad configuration file is uploaded the NVR may not work. Upgrade Choose page is displayed.
(Parameter Configuration) > System Management > Upgrade. The Upgrade www.foscam.com 62 NVR User Manual Upgrading NVR Check the NVR Upgrade, then click the Browse... button to choose the upgrade file of the NVR. Click the Upgrade button to upgrade the NVR. Upgrading IP Camera Check the IP Camera Upgrade, then check the channel. Click the Browse... button to choose the upgrade file of the camera. Click the Upgrade button to upgrade the camera. Note: If you want to upgrade the camera in the Kit. Please make sure that the camera is connected to NVR through the cable, so that the camera has always been powered on. Don't shut down the power during upgrade. After upgrading, you can see the upgrade result. Your current system version will be displayed on your screen. You may go to the Parameter Configuration > Device Information > Firmware Version Page to check for the latest system versions available. Patch Installation Choose Patch Installation page is displayed.
(Parameter Configuration) > System Management > Patch Installation. The You can install or install patch of the NVR. Click Browse to select the patch file in the local directory. www.foscam.com 63 NVR User Manual Factory Reset Choose Reset page is displayed.
(Parameter Configuration) > System Management > Factory Reset. The Factory Click Factory Reset button, then click OK button in the pop-up message box and all parameters will return to factory settings. The NVR device will reboot automatically. Reboot Choose displayed.
(Parameter Configuration) > System Management > Reboot. The Reboot page is Click Reboot button, then click OK button in the pop-up message box. The NVR system will reboot. Auto Restore Choose Restore page is displayed.
(Parameter Configuration) > System Management > Auto Restore. The Auto www.foscam.com 64 NVR User Manual You can configure the Date and Time. The NVR system will be maintained at the setting time. 3.5 Playback Choose
(Playback), you can play the recording file of the NVR. 1. Select a date with recording in calendar. 2. Select the Record Type, and check the checkbox from the Channels. www.foscam.com 65 NVR User Manual 3. Click Search button to search the matched recorded files. If there are search results, then they will be shown in the time bar area. 4. Manage the recording. Icon Description Start Stop Fast backward. The fast backward speed can be 4 times, 8 times, 16 times or 32 times of the normal playing speed. Click this button. The multiple of normal playing speed is displayed in the upper right corner of the playback page. For example, <<
X4 indicates the current fast backward speed is four times of the normal speed. Fast forward. The fast forward speed can be twice, 4 times, 8 times, 16 times or 32 times of the normal playing speed. Click this button. The multiple of normal playing speed is displayed in the upper right corner of the playback page. For example, >>
X2 indicates the current playing speed is twice of the normal speed. Slow progress. The slow progress speed can be 1/2 times, 1/4 times, 1/8 times, 1/16 times or 1/32 times of the normal playing speed. Click this button. The multiple of normal playing speed is displayed in the upper right corner of the playback page. For example, >> X1/2 indicates the current playing speed is 1/2 times of the normal speed. Download. Downloaded files are stored to the local PC. If you need to download the recording files, click the icon. Double click a record, you can see the video of this record. Check the record, then click the Download button to save the recording files to your computer. Select the channel, click this button, and you can take a picture of a corresponding channel to the local computer. You can set the storage path, refer to the Web >
Parameter configuration > Settings > Storage Location. Click this button to enabled/disabled the audio. Full screen. Make the playing video maximized. After the video is maximized, www.foscam.com 66 NVR User Manual press ESC to exit full screen. 5. Playback time You can move the mouse to a specific time axis and click to watch the playback. Icon Description Zoom-in time axis. Zoom-out time axis. www.foscam.com 67 NVR User Manual 4 Appendix 4.1 HDD Capacity Calculation This chapter describes how to determine the size of the HDD you need when you install the NVR for the first time. The NVR adopts the MPEG4/H.264 compression technology and its dynamic range is large. Therefore, the capacity of the HDD depends on the estimated size of files generated in each channel every hour according to code streams. Computational formula of HDD Capacity:
Whole HDD Capacity(M)= number of the channels * time in need (hour) * spent of HDD Capacity per hour (MB/hour) The meanings of parameters are as follows:
Number of the channels: Number of channels where you need to enable recording. Time in need (hour): Time you need to record. Spent of HDD Capacity per hour Spent of HDD Capacity per hour(M/hour) =
BitRate bit 8 3600
(sec ond
) You can obtain the Bit Rate by using the following methods:
-In the GUI interface, choose Menu > Settings > Video , view the value of the Bit Rate.
-In the Web interface, choose Parameter Configuration > Local settings > Encoding Scheme, view the value of the Bit Rate.
[Example]
If you select 4M for the bit rate and select four channels for recording and one week of recording is needed, you can calculate the HDD capacity by using the following formula:
Recording time(hour) =7days*24 hours=168 hour Spent of HDD Capacity per hour(M/hour)=
Mbit 4 bit 8 3600
=1800M/hour www.foscam.com 68 NVR User Manual Whole HDD Capacity(M)=4*168(hour)*1800 (M/hour) =1209600M, 1209600M=
1209600M =1181.25G 1024 According to the preceding calculation result, you are advised to buy a HDD of 1.5 TB or above. 4.2 Common Operations 1.Third Party Domain Name Settings User can also use third part DDNS, such as www.no-ip.com, www. 3322.com Here take www.no-ip.com for example:
1) Step 1, Go to the website www.no-ip.com to create a free hostname Firstly: Login on www.no-ip.com and click No-IP Free to register. www.foscam.com 69 NVR User Manual Click here to register . Please register an account step by step according to instructions on www.no-ip.com. After registration, please login your email which used to register. You will receive an email from website, please click the link to activate your ACCOUNT as indicated in email. Secondly: Login the link with the registered username and password to create your domain name. www.foscam.com 70 NVR User Manual Please create the domain name step by step according to instructions on www.no-ip.com Step 2, DO DDNS Service Settings within the NVR Please set DDNS Settings within the NVR by hostname, a user name and password you've got from www.no-ip.com Take hostname ycxgwp.no-ip.info, user name cam, password cam2012 for example. Firstly, goes to option of DDNS Settings on the administrator panel. Secondly, select No-Ip as a server.. Thirdly, fill cam as DDNS user, fill password cam2012 as DDNS password, fill ycxgwp.no-ip.info as DDNS domain and server URL, Then click save to make effect. The camera will restart and to take the DDNS settings effective. Fourthly, after the restart, login the NVR, and go to option of Device Status on the administrator panel, and check if the DDNS status is successful. If failed, please double check if you have input the correct hostname, user name, and password, and try to redo the settings. NOTE :
If you have set Third Party DDNS successfully ,the Domain Name will be invalid. The Third Party DDNS and the Domain Name cannot work at the same time, the last time you configured will take effect. 2) Do port forwarding within the router Example: The camera's LAN IP address is http://192.168.8.100:2000 , Media port no. is 9200. Firstly, login the router, goes to the menu of Port Forwarding or Port Trigger (or named Virtue Server on www.foscam.com 71 NVR User Manual some brands of router). Take Linksys brand router as an example, Login the router, and goes to Applications & Gaming->Single Port Forwarding. Secondly, Create a new column by LAN IP address & HTTP Port No. of the NVR within the router showed as below. Assign a name as you like Fill the Media Port no. of the camera on the column of External Port and Internal Port . 3) Use domain name to access the camera via internet After the port forwarding is finished, you can use the domain name+ http no.to access the camera via internet. Take hostname ycxgwp.no-ip.info and http no. 2000 for example, the accessing link of the camera via internet would be http:// ycxgwp.no-ip.info:2000 2. Configure the IP Parameters Here we take TP-LINK router as an example. The IP address of the NVR must be in the range of the router address pool. Log in to the router client through the browser and select DHCP Server > DHCP service. On the DHCP page, you can view the start address and end address of the address pool. www.foscam.com 72 NVR User Manual The subnet mask of the NVR must be the same as the subnet mask in LAN port status. The default gateway of the NVR is the same as the IP address in LAN port status. The preferred DNS and alternative DNS can be the same as the DNS in WAN port status. www.foscam.com 73 NVR User Manual 4.3 Specifications NVR Model FN3104W Video Input IP Video Input 4-Channel HD IP camera input HD-OUT Output 1 * HD-OUT Video Output VGA Output 1 * VGA Display Resolution Recording Resolution 1280 * 720/60Hz, 1280 * 1024/60Hz, 1280 * 720/50Hz, 1280
* 1024/50Hz 720P per channel ( 4ch@720P ) Recording Record Mode Manual / Time Scheduled / Motion Detect Compression Format Synchronous Playback Playback H.264 4 channels 720P synchronous video playback Playback Mode Fast forward / Fast backward / Frame forward / Slow Play Ethernet One 10/100Mbps RJ45 port Wireless Standard IEEE802.11b/g/n Network Wireless Security WEP, WPA, WPA2 Network Protocol IP, TCP, UDP, HTTP, HTTPS, SMTP, FTP, DHCP, DDNS, RTSP, UPnP, ONVIF www.foscam.com 74 NVR User Manual HDD Capacity Up to 4TB Network Interface 1 * 10/100 Mbps RJ45 port External Interface USB Interface 1 * USB2.0 interface for mouse and external storage Button 1 * Power on/off button,1* Reset button Computer Operating System Microsoft Windows XP, 7, 8, 8.1, 10, Mac OS Software Internet Viewing Microsoft IE8 and above version, Firefox, Safari Smart phone iOS, Android, 3G/4G Smartphones Language Language Dutch, Greek, Russian, Polish, Spanish, Portuguese, Italian, 14 languages (Chinese, English, French, Hungarian, Czech, German, Finland) Power Supply DC 12V/2A Dimension (L * W *
H) 234mm * 234mm * 52mm (9.2in * 9.2in * 2.0in) Net Weight 660g (1.5lb) Physical and Environmental Operating Temperature
-10C ~ 55C (-4F ~ 131F) Operating Humidity 20% ~ 85% non-condensing Storage Temperature
-20C ~ 60C (-4F ~ 140F) www.foscam.com 75 NVR User Manual Storage Humidity 0% ~ 90% non-condensing Camera Model FI9800W Sensor Type 1/4" CMOS Image Sensor Video Quality 720p (1280 * 720) Backlight Compensation Lens Type f:4mm, F:2.0 IR Range 20m (65ft) Lens Infrared Mode Automatic or manual View Angle 62 Ethernet One 10/100Mbps RJ45 port Wireless Standard IEEE802.11b/g/n IEEE802.11b: 11Mbps (Max.);
Network Data Rate IEEE802.11g: 54Mbps (Max.);
IEEE802.11n: 150Mbps (Max.). Wireless Security WEP, WPA, WPA2 Network Protocol IP, TCP, UDP, HTTP, HTTPS, SMTP, FTP, DHCP, DDNS, RTSP, ONVIF Video Format H.264 Multi-Stream Dual streams Software Features www.foscam.com 76 NVR User Manual Motion Detection Day/Night Waterproof IP66 Net Weight 360g(0.79lb) Power DC12V Power Consumption < 5W Dimension (L * W *
H) Physical and 97mm * 67mm * 64mm (3.8in * 2.6in * 2.5in) Environmental Certification FCC, IC, CE, RoHS, IP66 Operating Temperature
-10C~ 60C (14F ~ 140F) Operating Humidity 10% ~ 80% non-condensing Storage Temperature
-20C ~ 60C (-4F ~ 140F) Storage Humidity 0% ~ 90% non-condensing www.foscam.com 77 NVR User Manual 4.4 FAQ 1. No image displayed on the monitor after starting up normally. Verify the device is connected with the monitor via HD-OUT or VGA cable. Verify the connection cable is good. Verify Input mode of the monitor is correct. Please check the input mode of the monitor matches with the output mode of the device (e.g. if the output mode of NVR is HD-OUT output, then the input mode of monitor must be the HD-OUT input). And if not, please modify the input mode of monitor. 2. No record file found in the NVR local HDD, and prompt "No record file found". Verify the system time setting is correct. Choose Menu > Settings > General in the GUI interface, and verify the time is correct. Verify the search condition is correct. Choose Menu > Playback in the GUI interface, and verify the channel and time are correct. Verify the HDD status is normal. Choose Menu > About > HDD Info in the GUI interface, view the HDD status. 3. Why recording is not performed after motion detection is enabled?
On the "Motion Detection" page, check whether the following are correctly set:
Check whether the motion detection channel is correct. Check whether a trigger time segment is set. Check whether a detection area is set. Check whether recording is selected. 4. Why can the NVR search the IPC but cannot connect the IPC?
On the "IPC management" page, check whether the following are correctly set:
Check whether the user name and password for the IPC are correct. Check whether the web page port for the IPC is correct. Check whether the IPC also supports the protocol selected in the NVR. 5. The screen of the display is incomplete. Confirm the current resolution and check the resolution supported by the display. If the resolution is 1920*1080, the display needs to support the resolution 1920*1080. 6. Why can't opened web pages on the client be used properly after the NVR server switches to the 1080P mode?
When the NVR server switches to the 1080P mode, some functions can take effect only after the server reboots. In this case, log out of the Web client and log in to it again. In similar cases, for example, changing the IP address and HTTP port of the NVR, you need to log in to the client again. www.foscam.com 78 NVR User Manual 7. Why can't video files be downloaded during video playback or downloaded files cannot be played back properly?
To save consumed resources, the server limits concurrency of video playback and file download. In this case, stop video playback and then download files or play back videos after video files are downloaded. 8. Why does the Web client prompt TIME OUT after you enable or disable UPNP in network settings?
In this case, the server restarts some applications. Accordingly, you need to exit the web client and log in to the client again. 9. It prompt "Have no right to create directory or file!" after taking snapshot. When you use Windows7 or Vista, you may be not able to snapshot path because of the security settings of computer. Please add the NVR as a trusted site to resolve this issue. Open IE browser, Choose Tools > Internet Options > Security, Select Trusted sites > then click Sites, it will pop up the page, as shown in the following figure. 10. After the adding of the IPC successfully, the video of the corresponding channel has lost in the live view mode. Make sure that the IPC display mode is not more than NVR display mode. For example: NVR display mode for the 4 * 960P, the IPC display mode can not be 1080P. 11. Why does the Web client prompt the message "Plugins are not found, Click me to download"
or "Find a new Plugins, Click me to download" after installing plug-in?
You need to close the current browser after installing the plug-in, and then open the browser to access the login page. www.foscam.com 79 NVR User Manual 4.5 Glossary Acrony m DDNS Term Description Dynamic Domain Name Server Dynamic DNS is a method, protocol, or network service that provides the capability for a networked device, such as a router or computer system using the Internet Protocol Suite, to notify a domain name server to change, in real time (ad-hoc) the active DNS configuration of its configured hostnames, addresses or other information stored in DNS. DHCP Dynamic Host Configuration Protocol DHCP is a network application protocol used by devices
(DHCP clients) to obtain configuration information for operation in an Internet Protocol network. HDD Hard Disk Drive HTTP Hypertext Transfer Protocol A storage medium which stores digitally encoded data on platters with magnetic surfaces. A protocol to transfer hypertext request and information between servers and browsers over a network PPPoE Point-to-Point Protocol over Ethernet It is a network protocol for encapsulating Point-to-Point Protocol
(PPP) frames inside Ethernet frames. It is used mainly with ADSL services where PTZ Pan, Tilt, Zoom NTP NVR Network Time Protocol Network Video Recorder individual users connect to the ADSL transceiver (modem) over Ethernet and in plain Metro Ethernet networks. PTZ cameras are motor driven systems that allow the camera to pan left and right, tilt up and down and zoom in and out. A protocol designed to synchronize the clocks of computers over a network. A NVR can be a PC-based or embedded system used for centralized management and storage for IP cameras. www.foscam.com 80 NVR User Manual 4.6 CE & FCC Electromagnetic Compatibility (EMC) This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the installation manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is like to cause harmful interference, in which case the user will be required to correct the interference at his own expense. FCC Caution Any changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. CE Mark Warning This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. 4.7 WARRANTY FOSCAM values your business and always attempts to provide you the very best of service. No limited hardware warranty is provided by FOSCAM unless your Foscam product ("product") was purchased from an authorized distributor or authorized reseller. Distributors may sell products to resellers who then sell products to end users. No warranty service is provided unless the product is www.foscam.com 81 NVR User Manual returned to an authorized return center in the region where the product was first shipped by FOSCAM or to the point-of-purchase, which may have regional specific warranty implications. If you purchase your Foscam product from online store, please contact the point-of-purchase and ask for return / replacement / repair service. Limited Hardware Warranty The products are warranted to be free from manufacturing defects in materials and workmanship starting from the shipping date of Foscam. This limited hardware warranty does not cover:
Software, including the software added to the products through our factory-integration system, software that included in the CD,etc. Usage that is not in accordance with product instructions. Failure to follow the product instructions. Abuse firmware upgrade without the authorized technician's guidance. Normal wear and tear. Return Procedures Please read Foscam warranty policy & policy of your reseller first before sending items back to point-of-purchase. Customer must first contact point-of-purchase to obtain a Return Merchandise Authorization (RMA) number before returning the product. If the product you received is suspected to be defective and the product warranty has not expired, The RMA number will allow your reseller to track your return much easier and help them expedite processing your request. After receiving your RMA case number, pack the item(s) very well with the original box and all the original accessories included such as power adapters, brackets, cables, manuals, and driver CD disks. Write your RMA number and the return reason (the problem of the product) on the warranty card along with the complete package to send them back. Replacement Services If customers ask for replacement service, please contact point-of-purchase and follow their policy. Our technicians will inspect all items returned for replacement requests. If the retuned product is found in working order, we will return the same item received. However customers shall be www.foscam.com 82 NVR User Manual responsible for all shipping & handling charges incurred for getting the units back to customers. If returned products are found defective, we will replace the product and assume the shipping cost for sending back the replacement unit to customers. If for any reason, we are unable to provide a replacement of the original returned item(s). You will have a choice for a "Substitute" item at the same equal value. We do not provide exchange and replacement due to normal hardware upgrade according the market after 14 days after the product is delivered. Our technicians will test the product before send out the replacement, any other demand for more than two times replacement for the same product during replacement limit will be rejected. Replaced products are warranted from the balance of the former warranty period. Warranty Forfeiture Warranty is void if purchase from unauthorized distributor or reseller. Warranty is void if trade-mark, serial tags, product stickers have been removed, altered or tampered with. Warranty is void for mishandling, improper use, or defacing the product. Abuse firmware upgrade without the authorized technician's guidance. Warranty is void for physical damage, altered, either internally or externally, improper or inadequate packaging when returned for RMA purposes. Warranty is void if damage has resulted from accident, dismantle, abuse, or service or modification by someone other than the appointed vendor, souse, fission or the spare part has been over the period of warranty. Warranty is void if product is damaged due to improper working environment or operation. (For example, improper temperature, humidity, unusual physical or electrical stress or interference, failure or fluctuation of electrical power, static electricity, using wrong power adapter, etc.) Warranty is void if damaged by the use of parts not manufactured or sold by FOSCAM. Damage caused by improper installation of third-party products. Warranty is void if damaged for irresistible cause, such as earthquake, fire, lightning, flood, etc. Product beyond limited warranty. Shipping Fee If products are defective or damaged under normal use or operation in the replacement limit, distributors or resellers are responsible for the shipping cost the product back to customers, customers should assume the shipping cost send the product to the point-of-purchase. During replacement limit, if customers ask for replacement due to the product does not fit for www.foscam.com 83 NVR User Manual customer's personal expectation, customers should responsible for both shipping fee. Customers shall be responsible for both shipping fee if their product beyond the replacement limit but still in warranty limit. Repair Service Out Of Warranty FOSCAM provide extra repair service for product that out of warranty, it is chargeable. The total fee contains device cost and service fee. Device cost (including accessories) is the standard uniform price provide by FOSCAM. Different region may have different service fee, please contact the point-of-purchase to confirm that before you ask for this service. Our technicians will quote the total price after detect the product, If customers refused to repair after the quotation, customers need pay for the test fee, $3.5/hour. If agree with the quotation, test will be free. Repaired product out of warranty will obtains 3-month warranty from the date of the product back to customers. Limitation of Liability Foscam is not responsible for other extra warranty or commitment promised by resellers, if your reseller promised some extra commitment or warranty; please ask for written documents to protect your rights and interests. Foscam does not offer refunds under any circumstances. Please contact the point-of-purchase and follow their refund / return policy. Foscam shall not be liable under any circumstances for any consequential, incidental, special or exemplary damages arising out of or in any connection with this agreement or the products, including but not limited to lost profits, or any claim based on indemnity or contribution, or the failure of any limited or exclusive remedy to achieve its essential purpose or otherwise. Purchaser's exclusive remedy, as against Foscam, shall be the repair or replacement of defective parts. If Foscam lists a product on its website specification in error or that is no longer available for any reason, Foscam reserves the right to explain it without incurring any liability. All rights reserved. FOSCAM and the Foscam logo are trademarks of ShenZhen FOSCAM Intelligent Technology Limited., registered in the U.S. and other countries. www.foscam.com 84 NVR User Manual 4.8 Statement You are advised to be cautious in daily life, keep personal account information carefully, do not share personal account easily. Change passwords of your account and equipment periodically, and upgrade equipment firmware to strengthen security consciousness. Our company makes no warranty, implied or otherwise, that this product is suitable for any particular purpose or use. You need to abide by the relevant laws and regulations of the use restrictions when using products. Our company takes no responsibility of illegal activities by using our products. Our company takes no responsibility of the loss by force majeure, such as failure or faults of telecom system or the Internet network, computer viruses, malicious attacks of hackers, information damage or loss, and faults of computer system. My company does not need to take any responsibility of the special, incidental or corresponding loss by the products of our company or any software provide by our company, including but not limited to operating loss, profit or purpose. The company only takes the responsibility applicable to national and local legal requirements. Our company takes no responsibility of the loss caused by the following at ant time:
1) loss of purchases;
2) loss of intangible property damage, such as data, programs;
3) loss of compensation claimed by third-party customers. Delete images, format the memory card or other data storage devices does not completely remove the original image data. You can restore deleted files from discarded the storage device by commercial software, but which will potentially lead to personal image data used maliciously by others. The privacy of the data security belongs to user responsibility, the company takes no responsibility. Parts mentioned in this statement should not be understood by the configuration description of the product purchased by the customer, the product configuration must accord to the specific models purchased by the customer. Without the prior written permission of my company, all the contents of relevant operating instructions manual affiliated to the product must not be reproduced, transmitted, transcribed or stored in a retrieval system, or translated into other languages. Our company will reserve the right to improve and modify the product and corresponding manuals. www.foscam.com 85 NVR User Manual The company reserves the right of final interpretation on our products. 4.9 Obtaining Technical Support While we hope your experience with the NVR is enjoyable and easy to use, you may experience some issues or have questions that this User's Guide has not answered. If you have problem with device, please first contact reseller for solving the problems. If our reseller cannot provide service, please contact our service department:
tech@foscam.com www.foscam.com 86
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-10-14 | 2422 ~ 2452 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2016-10-14
|
||||
1 | Applicant's complete, legal business name |
ShenZhen Foscam Intelligent Technology Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0022772438
|
||||
1 | Physical Address |
9/F, Block F5, TCL International E City, No.1001 ZhongShanyuan Rd., NanShan District
|
||||
1 |
9/F, Block F5, TCL International E City, No.1001
|
|||||
1 |
Shenzhen, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
b******@baclcorp.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
ZDE
|
||||
1 | Equipment Product Code |
FN3104W
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
D****** T******
|
||||
1 | Telephone Number |
0755-******** Extension:
|
||||
1 | Fax Number |
0755-********
|
||||
1 |
d******@foscam.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Network Video Recorder | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The device has 20 MHz and 40 MHz bandwidth modes. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bay Area Compliance Laboratories Corp.(kunshan)
|
||||
1 | Name |
j****** c****
|
||||
1 | Telephone Number |
86051******** Extension:
|
||||
1 | Fax Number |
+86 (********
|
||||
1 |
j******@baclcorp.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | MO | 2412 | 2462 | 0.342 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | MO | 2422 | 2452 | 0.356 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC